Victron Energy Argofet Battery Isolators 200-2AC (2 Batteries 200 amp)
Asin: B00NT9MTMQ | Model: ARG200201020R | PartNumber: ARG200201020R | Ean: 8719076019138
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.In Contrast With Diode Battery Isolators, Fet Isolators Have Virtually No Voltage Loss. Voltage Drop Is Less Than 0.02-Volt At Low Current And Averages 0.1-Volt At Higher Currents.
When Using Victron Energy Argo Fet Battery Isolators, There Is No Need To Also Increase The Output Voltage Of The Alternator. However, Care Should Be Taken To Keep Cable Lengths Short And Of Sufficient Cross Section.
Discharging The Accessory Battery For Example Will Not Result In Also Discharging The Starter Battery.
12/24 Volt Auto Ranging: Victron Energy Argofet Battery Isolator Will Automatically Adjust To A 12-Volt Or 24-Volt System.
Features
- Victron Energy Argofet battery isolators 200-2AC, allow simultaneous charging of two batteries from one alternator, without connecting the batteries together
- 12/24 Volt auto ranging: Victron Energy Argofet battery isolator will automatically adjust to a 12-Volt or 24-Volt system
- In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0.02-Volt at low current and averages 0.1-Volt at higher currents
- Discharging the accessory battery for example will not result in also discharging the starter battery
- When using Victron Energy ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. However, care should be taken to keep cable lengths short and of sufficient cross section
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 4.72 x 2.56 x 7.87 inches | Weight: 2.87 pounds
Warranty: 5 Years
See On Amazon Similar To Victron Energy Argofet Battery Isolators
#1
Victron Energy Buck-Boost DC-DC Converter 100 Amp for Charging a 12V or 24V Service Battery in Vehicles
Asin: B09NBWYBRQ | Model: Sunroad Equipment | PartNumber: Sunroad Equipment | Ean: 8719076046837
Engine Running Detection System: Deep Discharge Of The Vehicle's Starting Battery Is Avoided By A Built-In Engine Running Detection System.
One Product For 12V, 24V And 12/24V Systems: The Converter Can Be Programmed To Charge A 12V Or A 24V Auxiliary Battery From Either A 12V Or A 24V Alternator And Starter Battery.
Fully Programmable: The Converter Can Be Fully Programmed By Means Of A Simple And User-Friendly Pc Application.
Victron Energy Buck-Boost Dc-Dc Converter Is The Solution For Battery Charging Problems With Euro 5 And Euro 6 Engines And Alternator Charge Current Protection With Lithium Systems.
Features
- Victron Energy Buck-Boost DC-DC Converter is a DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator
- Victron Energy Buck-Boost DC-DC Converter is the solution for battery charging problems with Euro 5 and Euro 6 engines and alternator charge current protection with lithium systems
- Engine running detection system: Deep discharge of the vehicle's starting battery is avoided by a built-in engine running detection system
- Fully programmable: The converter can be fully programmed by means of a simple and user-friendly PC application
- One product for 12V, 24V and 12/24V systems: The converter can be programmed to charge a 12V or a 24V auxiliary battery from either a 12V or a 24V alternator and starter battery
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.97 x 6.38 x 11.34 inches | Weight: 4.00 Kilograms
See On Amazon #2
Victron Energy Orion-Tr IP43 12/12-Volt 9 amp 110-Watt Isolated DC-DC Converter
Asin: B01LYZZRBQ | Model: ORI121210110 | PartNumber: ORI121210110 | Ean: 8719076016717, 8719076016878
Ip43 Protection - When Installed With The Screw Terminals Oriented Downwards.
The Screw Terminals Give The Advantage Of Not Needing Any Special Tools For Installation.
All Models Are Short Circuit Proof And Can Be Paralleled To Increase Output Current. Also High Temperature Protected, The Output Current Will Reduce At High Ambient Temperature.
The Remote On-Off Connector Eliminates The Need For A High Current Switch In The Input Wiring, The Remote On-Off Can Be Operated With A Low Power Switch Or By The Engine Run/Stop Switch.
Features
- Victron Energy Orion-Tr DC-DC Isolated Converter converts voltage from 12 to 12-Volt with a 9 amp and 110-Watt output and is IP43 protected
- The remote on-off connector eliminates the need for a high current switch in the input wiring, the remote on-off can be operated with a low power switch or by the engine run/stop switch
- IP43 protection - When installed with the screw terminals oriented downwards
- All models are short circuit proof and can be paralleled to increase output current. Also high temperature protected, the output current will reduce at high ambient temperature
- The screw terminals give the advantage of not needing any special tools for installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 4.00 x 4.50 x 1.90 inches | Weight: 0.99 pounds
Warranty: Warranty
See On Amazon #3
Victron Energy Orion-Tr IP43 24/12-Volt 5 amp 60-Watt DC-DC Converter, Non-Isolated
Asin: B072C57N84 | Model: ORI241205200 | PartNumber: ORI241205200 | Ean: 8719076022848
Deliver A Stable 12-Volt Supply From A 24-Volt System - An Inferior Supply Can Cause Irreparable Damage To 12 Volt System, But The Use Of Victron Energy Orion Voltage Converter Prevents Such Problems.
Ip43 Protection When Installed With The Screw Terminals Oriented Downwards.
Screw Terminals: The Screw Terminals Give The Advantage Of Not Needing Any Special Tools For Installation.
High Efficiency: Using Synchronous Rectification, Full Load Efficiency Exceeds 95%.
Features
- Victron Energy Orion-Tr IP43 24/12-Volt 60-Watt DC-DC Converter converts voltage from DC 24-Volt to DC 12-Volt with a 5 amp output; Non-Isolated
- High efficiency: Using synchronous rectification, full load efficiency exceeds 95%
- Deliver a stable 12-Volt supply from a 24-Volt system - An inferior supply can cause irreparable damage to 12 Volt system, but the use of Victron Energy Orion voltage converter prevents such problems
- Screw terminals: The screw terminals give the advantage of not needing any special tools for installation
- IP43 protection when installed with the screw terminals oriented downwards
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.22 pounds
See On Amazon #4
Victron Energy SmartShunt 500 amp Battery Monitor (Bluetooth)
Asin: B0856PHNLX | Model: SHU050150050 | PartNumber: SHU050150050 | Ean: 5060297347047, 8719076044253
Connect Victron Energy Smartshunt To Your Phone Or Tablet Via Bluetooth And Easily Modify Settings Or Monitor Your Batteries, Save Space By Not Using A Dedicated Display.
Incorrect Installation Can Be Hazardous. Consult A Professional And Follow Electrical Codes During Installation.
The Shunt And Cables Can Limit Bluetooth Range, Typically 10-15 Meters, Which Is Usually Adequate. However, Nearby Electrically Conducting Elements Like Vehicle Chassis Or Seawater Can Reduce Range Further. To Address This, Add A Ve.Direct Bluetooth Dongle And Deactivate Bluetooth In The Smartshunt..
Optionally Connect To A Victron Energy Gx Device With A Ve.Direct Cable, Monitor A Second Battery, Bank Midpoint, Or Temperature (May Require Additional Parts).
Victron Energy Smartshunt Is An Easy To Setup, All In One Battery Monitor. It Records Voltage, Current, Energy And Time Remaining, And Much More. Keeps Records And Charts Of Historical Data And Alarms.
Features
- Victron Energy SmartShunt displays battery State of Charge % and acts like a fuel gauge for your batteries
- Victron Energy Smartshunt is an easy to setup, all in one battery monitor. It records voltage, current, energy and time remaining, and much more. Keeps records and charts of historical data and alarms
- Connect Victron Energy Smartshunt to your phone or tablet via Bluetooth and easily modify settings or monitor your batteries, save space by not using a dedicated display
- Optionally connect to a Victron Energy GX device with a VE.Direct cable, monitor a second battery, bank midpoint, or temperature (may require additional parts)
- Incorrect installation can be hazardous. Consult a professional and follow electrical codes during installation
- The shunt and cables can limit Bluetooth range, typically 10-15 meters, which is usually adequate. However, nearby electrically conducting elements like vehicle chassis or seawater can reduce range further. To address this, add a VE.Direct Bluetooth Dongle and deactivate Bluetooth in the SmartShunt.
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.81 x 2.13 x 4.72 inches | Weight: 0.88 pounds
Warranty: Warranty
See On Amazon #5
Victron Energy SmartShunt IP65 500 amp Battery Monitor (Bluetooth)
Asin: B0BF636VBX | Model: SHU065150050 | PartNumber: SHU065150050 | Ean: 8719076057895
Connect Victron Energy Smartshunt Ip65 To Your Phone Or Tablet Via Bluetooth And Easily Modify Settings Or Monitor Your Batteries, Save Space By Not Using A Dedicated Display.
Incorrect Installation Can Be Hazardous. Consult A Professional And Follow Electrical Codes During Installation.
The Shunt And Cables Can Limit Bluetooth Range, Typically 10-15 Meters, Which Is Usually Adequate. However, Nearby Electrically Conducting Elements Like Vehicle Chassis Or Seawater Can Reduce Range Further. To Address This, Add A Ve.Direct Bluetooth Dongle And Deactivate Bluetooth In The Smartshunt..
Optionally Connect To A Victron Energy Gx Device With A Ve.Direct Cable, Monitor A Second Battery, Bank Midpoint, Or Temperature (May Require Additional Parts).
Victron Energy Smartshunt Ip65 Is An Easy To Setup, All In One Battery Monitor. It Records Voltage, Current, Energy And Time Remaining, And Much More. Keeps Records And Charts Of Historical Data And Alarms.
Features
- The new Victron Energy SmartShunt IP65 is waterproof and displays battery State of Charge % and acts like a fuel gauge for your batteries
- Victron Energy Smartshunt IP65 is an easy to setup, all in one battery monitor. It records voltage, current, energy and time remaining, and much more. Keeps records and charts of historical data and alarms
- Connect Victron Energy Smartshunt IP65 to your phone or tablet via Bluetooth and easily modify settings or monitor your batteries, save space by not using a dedicated display
- Optionally connect to a Victron Energy GX device with a VE.Direct cable, monitor a second battery, bank midpoint, or temperature (may require additional parts)
- Incorrect installation can be hazardous. Consult a professional and follow electrical codes during installation
- The shunt and cables can limit Bluetooth range, typically 10-15 meters, which is usually adequate. However, nearby electrically conducting elements like vehicle chassis or seawater can reduce range further. To address this, add a VE.Direct Bluetooth Dongle and deactivate Bluetooth in the SmartShunt.
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.81 x 2.13 x 4.72 inches
Warranty: Warranty
See On Amazon #6
Victron Energy BMV-712 Smart Battery Monitor (Grey)
Asin: B075RTSTKS | Model: MONITOR-VTBMV-S | PartNumber: MONITOR-VTBMV-S | Ean: 0768813157747, 8719076037781, 0859042007702, 8719076037798 | UPC: 859042007702, 768813157747
Built-In Bluetooth Communication - Wirelessly Monitor Your Batteries On Smartphones, Tablets, And Other Devices. Or, Connect To A Gx Device Via Ve.Direct Cable (Sold Separately) And Monitor Anywhere In The World With Vrm.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
Displays % State Of Charge, Voltage, Current, Energy/Time Remaining, And More. View Historical Data And Charts In Victron Connect. Easy To Program For Initial Setup On The Display Or Via Bluetooth.
Victron Energy Bmv-712 Features An Additional Input Which Can Be Programmed To Measure Battery Temperature (Temperature Sensor Sold Separately), Midpoint Voltage, Or Voltage Of A Second Battery, Plus A Relay That Can Be Programmed To Control Other Devices (Such As A Battery Protect Or Generator).
Features
- Victron Energy BMV-712 Smart Battery Monitor (Grey) is a high precision smart battery monitor for systems with battery voltage ranging from 6.5 - 70 VDC
- Victron Energy BMV-712 features an additional input which can be programmed to measure battery temperature (temperature sensor sold separately), midpoint voltage, or voltage of a second battery, plus a relay that can be programmed to control other devices (such as a battery protect or generator)
- Built-in Bluetooth Communication - wirelessly monitor your batteries on smartphones, tablets, and other devices. Or, connect to a GX device via VE.Direct cable (sold separately) and monitor anywhere in the world with VRM
- Displays % State of Charge, Voltage, Current, Energy/Time remaining, and more. View historical data and charts in Victron Connect. Easy to Program for initial setup on the display or via bluetooth
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 3.00 x 10.00 x 9.00 Inches | Weight: 1.63 pounds
Warranty: 5 year replacement on defects
See On Amazon #7
Victron Energy Smart Battery Sense, Voltage and Temperature Sensor, Long Range (up to 10m)
Asin: B07RTYGMBD | Model: 82932 | PartNumber: 82932 | Ean: 8719076047919
The Connection Between Victron Energy Smart Battery Sense And One Or More Solar Charger Is Wireless: It Uses Ve.Smart Network - A Wireless Technology Based On Bluetooth Smart.
Installation Is Simple, Quick And Tidy. Just Connect The Unit's Two Eyelets To Your Battery Terminals And Attach The Victron Energy Smart Battery Sense Unit Directly Onto The Battery-Body Using Its Self-Adhesive Strip.
Information Transmitted Can Be Used Simultaneously By One, Two Or More Solar Chargers Connected To The Same 12V, 24V And 48V Battery Bank. The Smart Network Is Set Up Using The Victronconnect App.
With Voltage And Temperature Sense In Place, Batteries Will Be Better Charged; Improving Charging-Efficiency And Prolonging Battery Life.
Features
- Victron Energy Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron Energy MPPT Solar Chargers
- With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life
- The connection between Victron Energy Smart Battery Sense and one or more Solar Charger is wireless: It uses VE.Smart Network - a wireless technology based on Bluetooth Smart
- Information transmitted can be used simultaneously by one, two or more Solar Chargers connected to the same 12V, 24V and 48V battery bank. The Smart Network is set up using the VictronConnect app
- Installation is simple, quick and tidy. Just connect the unit's two eyelets to your battery terminals and attach the Victron Energy Smart Battery Sense unit directly onto the battery-body using its self-adhesive strip
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.50 x 1.50 x 0.55 inches | Weight: 0.10 Pounds
Warranty: Warranty
See On Amazon #8
Victron Energy BMV-712 Smart Battery Monitor (Black)
Asin: B084M2XYK4 | Model: NT-1326 | PartNumber: NT-1326 | Ean: 8719076049517
Built-In Bluetooth Communication - Wirelessly Monitor Your Batteries On Smartphones, Tablets, And Other Devices. Or, Connect To A Gx Device Via Ve.Direct Cable (Sold Separately) And Monitor Anywhere In The World With Vrm.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
Displays % State Of Charge, Voltage, Current, Energy/Time Remaining, And More. View Historical Data And Charts In Victron Connect. Easy To Program For Initial Setup On The Display Or Via Bluetooth.
Victron Energy Bmv-712 Features An Additional Input Which Can Be Programmed To Measure Battery Temperature (Temperature Sensor Sold Separately) Midpoint Votlage, Or Voltage Of A Second Battery, Plus A Relay That Can Be Programmed To Control Other Devices (Such As A Battery Protect Or Generator).
Features
- Victron Energy BMV-712 Smart Battery Monitor (Grey) is a high precision smart battery monitor for systems with battery voltage ranging from 6.5 - 70 VDC
- Victron Energy BMV-712 features an additional input which can be programmed to measure battery temperature (temperature sensor sold separately) midpoint votlage, or voltage of a second battery, plus a relay that can be programmed to control other devices (such as a battery protect or generator)
- Built-in Bluetooth Communication - wirelessly monitor your batteries on smartphones, tablets, and other devices. Or, connect to a GX device via VE.Direct cable (sold separately) and monitor anywhere in the world with VRM
- Displays % State of Charge, Voltage, Current, Energy/Time remaining, and more. View historical data and charts in Victron Connect. Easy to Program for initial setup on the display or via bluetooth
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Weight: 1.00 pounds
See On Amazon #9
Victron Energy Lynx Power In Battery Connector
Asin: B00NT9X5AG | Model: LYN020102000 | PartNumber: LYN020102000 | Ean: 8719076023739, 8380000006724, 8719076022589
It Can Take Cables Up To 22 Mm In Diameter Through The Bottom Entry Guides, And No Limit Via The Two Side Connections.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
A Modular Dc Bus Bar, The Victron Energy Lynx Power In Is Used To Connect Batteries To The Victron Energy Lynx Dc Distribution System.
Victron Energy Lynx Power In Contains A Negative And Positive Dc Bus-Bar With M8 Bolts In Which To Connect Batteries Cables.
Features
- Victron Energy lynx power in module is used to connect batteries via an external fuse, It can be useful if you have multiple parallel strings
- Victron Energy Lynx Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables
- It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections
- A modular DC bus bar, the Victron Energy Lynx Power In is used to connect batteries to the Victron Energy Lynx DC distribution system
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 3.07 x 11.10 x 6.77 inches | Weight: 0.13 pounds
Warranty: Warranty
See On Amazon #10
Victron Energy SmartSolar Pluggable Control Display
Asin: B07GTPQP1X | Model: SCC900650010 | PartNumber: SCC900650010 | Ean: 8719076043546
With A Crystal Clear Display, This Is A Great Add-On For All Victron Energy Smartsolar Charge Controllers.
This Comes With 5 Year Warranty.
Dimensions: 2 X 3 X 5 Inches Weight: 0.20 Lb.
Simply Remove The Rubber Seal That Protects The Plug On The Front Of The Controller And Plug-In The Display. Mounting Screws Are Included.
Features
- Victron Energy SmartSolar Pluggable Control Display is a pluggable LCD display for Victron Energy SmartSolar Charge Controllers
- Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display. Mounting Screws are included
- With a crystal clear display, this is a great add-on for all Victron Energy SmartSolar charge controllers
- Dimensions: 2 x 3 x 5 inches Weight: 0.20 lb
- This comes with 5 year Warranty
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.00 x 4.50 x 2.00 inches | Weight: 0.20 pounds
Warranty: Warranty
See On Amazon #11
Victron Energy Lynx Shunt IP22 VE.Can 1000 amp
Asin: B00NT9X18M | Model: NT-994 | PartNumber: NT-994 | Ean: 8380000006748, 8719076022602
The Built-In Battery Monitor Accurately Monitors The State Of Charge Of Your Battery.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
Victron Energy Lynx Shunt Ve.Can Has Ve.Can Communication For Monitoring And Setup With A Victron Energy Gx Device.
Victron Energy Lynx Shunt Contains A Positive Bus-Bar With Space To Mount A Cnn Fuse And A Negative Bus-Bar With A Shunt.
Features
- Victron Energy Lynx Shunt VE.Can is an intelligent 1000 amp shunt with location for a fuse (not included)
- Victron Energy Lynx shunt contains a positive bus-bar with space to mount a CNN fuse and a negative bus-bar with a shunt
- The built-in battery monitor accurately monitors the state of charge of your battery
- Victron Energy Lynx Shunt VE.Can has VE.Can communication for monitoring and setup with a Victron Energy GX device
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 190.00 x 80.00 x 180.00 Millimeters | Weight: 0.09 Pounds
Warranty: Warranty
See On Amazon #12
Victron Energy Blue Smart IP65 12-Volt 5 amp Battery Charger (Bluetooth)
Asin: B07TLCT7X7 | Model: NT-1167 | PartNumber: NT-1167 | Ean: 8719076047230
This Charger Will Tend To A Lithium (Lifepo4) Or Lead Acid Battery To Maximize Performance And Increase Lifespan.
Plug And Play! Comes With Easy To Use Alligator Clips. Or, Leave The M8 Eyelets Permanently Connected To Your Battery And Simply Connect/Disconnect The Charger Using The Included Quick Connectors!.
This Charger Will Revive Even Deeply-Discharged Batteries From 0V With Its Force-Feeding Feature. Once The Battery Has Enough Voltage, Normal Charging Will Resume.
This Professional And Innovative Battery Charger Is Equipped With A Built-In Bluetooth Feature. Using The Victron Connect App, You Can Adjust Charging Settings And Monitor Real-Time And Historic Battery Charging Data. Or, Switch To Power Supply Mode To Power Dc Loads Without A Battery..
Features
- Take this water, dust, and chemical resistant charger with you wherever you go, whether it's on your boat, yacht, classic car, motorcycle, camper-van, or workshop. The Victron Energy Blue Smart IP65 Charger is the perfect solution for all your battery charging needs. Experience the ultimate power and convenience!
- This professional and innovative battery charger is equipped with a built-in Bluetooth feature. Using the Victron Connect app, you can adjust charging settings and monitor real-time and historic battery charging data. Or, switch to power supply mode to power DC loads without a battery.
- This charger will tend to a lithium (LiFePO4) or lead acid battery to maximize performance and increase lifespan
- This charger will revive even deeply-discharged batteries from 0V with its force-feeding feature. Once the battery has enough voltage, normal charging will resume
- Plug and Play! Comes with easy to use alligator clips. Or, leave the M8 eyelets permanently connected to your battery and simply connect/disconnect the charger using the included quick connectors!
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.80 x 7.50 x 3.70 inches
Warranty: Warranty
See On Amazon #13
Victron Energy MPPT Control
Asin: B017T2XOE0 | Model: VE-CONTROL | PartNumber: VE-CONTROL | Ean: 5060546232001, 4260426116334, 8719076025641
Maintaining A Consistent And Professional Look To Your Panels And Systems Monitoring Equipment.
This Comes With 5 Year Warranty.
Dimensions: 8 X 2 X 6 Inches Weight: 0.44 Lb.
This Is Mounted In The Familiar Victron Energy Bmv-700 Series Housing.
Features
- Victron Energy MPPT Control lets you see the status and setup all Victron Energy MPPTs that use a VE.Direct communications port
- This is mounted in the familiar Victron Energy BMV-700 series housing
- Maintaining a consistent and professional look to your panels and systems monitoring equipment
- Dimensions: 8 x 2 x 6 inches Weight: 0.44 lb
- This comes with 5 year Warranty
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.22 x 2.72 x 2.05 Inches | Weight: 0.17 pounds
Warranty: Warranty
See On Amazon #14
Victron Energy Battery Switch ON/Off 275 amp
Asin: B095X94JXF | Model: VBS127010010 | PartNumber: VBS127010010 | Ean: 8719076052258
The Knob Is Removable For Isolation Or Safety Purposes.
Victron Energy Battery Switch Is Suitable For Use In An Engine Room.
Victron Energy Battery Switch Can Be Either Surface Or Panel Mounted, Providing Flexibility During Install.
It Has A Unique Ergonomic And Aesthetic Knob Design.
Features
- Victron Energy Battery Switch ON/OFF 275 amp is suitable for battery systems up to 48V
- It has a unique ergonomic and aesthetic knob design
- The knob is removable for isolation or safety purposes
- Victron Energy Battery Switch can be either surface or panel mounted, providing flexibility during install
- Victron Energy Battery Switch is suitable for use in an engine room
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 2.72 x 2.72 x 2.99 inches
Warranty: Warranty
See On Amazon #15
Victron Energy Smart BatteryProtect 12/24-Volt 65 amp (Bluetooth)
Asin: B07MXG5XZ4 | Model: BPR065022000 | PartNumber: BPR065022000 | Ean: 8719076041276, 8719076041238, 5060546238409
Victron Energy Smart Battery Protect Automatically Detects System Voltage. Can Be Set To Engage / Disengage At Several Different Voltages. The Seven Segment Display Will Indicate Which Setting Has Been Chosen.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
12/24-Volt Auto Ranging: Victron Energy Smart Batteryprotect Automatically Detects System Voltage One Time Only. Maximus Continuous Load Current 65 Amp And Peak Current (During 30 Seconds) 250 Amp.
When Using Bluetooth To Program Victron Energy Smart Battery Protect, Any Required Engage/Disengage Levels Can Be Set. Alternatively, One Of Nine Predefined Engage/Disengage Levels Can Be Set. Bluetooth Can Be Disabled.
Features
- Victron Energy Smart BatteryProtect 12/24-Volt 65 amp with built-in Bluetooth, disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine
- When using Bluetooth to program Victron Energy Smart Battery Protect, any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set. Bluetooth can be disabled
- Victron Energy Smart Battery Protect automatically detects system voltage. Can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen
- 12/24-Volt auto ranging: Victron Energy Smart BatteryProtect automatically detects system voltage one time only. Maximus continuous load current 65 amp and Peak current (during 30 seconds) 250 amp
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.57 x 4.17 x 1.89 inches | Weight: 0.01 pounds
Warranty: Warranty
See On Amazon #16
Victron Energy BatteryProtect 12/24-Volt 65 amp
Asin: B01N6ATT8C | Model: BPR000065400 | PartNumber: BPR000065400 | Ean: 8719076034193, 0619639706964 | UPC: 619639706964
12/24-Volt Auto Ranging - Victron Energy Batteryprotect Automatically Detects System Voltage.
Incorrect Installation Can Be Hazardous, Please Consult A Licensed Professional And Follow All Applicable Electrical Codes During Installation.
Victron Energy Batteryprotect Can Be Set To Engage / Disengage At Several Different Voltages, The Seven Segment Display Will Indicate Which Setting Has Been Chosen.
Maximum Continuous Load Current 65 Amp And Peak Current (During 30 Seconds) 250 Amp.
Features
- Victron Energy BatteryProtect 12/24-Volt 65 amp disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine
- Maximum continuous load current 65 amp and Peak current (during 30 seconds) 250 amp
- 12/24-Volt auto ranging - Victron Energy BatteryProtect automatically detects system voltage
- Victron Energy BatteryProtect can be set to engage / disengage at several different voltages, the seven segment display will indicate which setting has been chosen
- Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.89 x 1.57 x 4.17 Inches | Weight: 0.46 pounds
Warranty: Warranty
See On Amazon #17
Victron Energy Battery Balancer
Asin: B01DH6B2D2 | Model: BBA000100100 | PartNumber: BBA000100100 | Ean: 8719076020950, 3700970003137
When The Charge Voltage Of A 24-Volt Battery System Increases To More Than 27-Volt, Victron Energy Battery Balancer Will Turn On And Compare The Voltage Over The Two Series Connected Batteries.
If Needed, Several Balancers Can Be Paralleled. A 48V Battery Bank Can Be Balanced With Three Victron Energy Battery Balancers.
Victron Energy Battery Balancer Will Draw A Current Of Up To 1Amp From The Battery (Or Parallel Connected Batteries) With The Highest Voltage. The Resulting Charge Current Differential Will Ensure That All Batteries Will Converge To The Same State Of Charge.
Victron Energy Battery Balancer Equalizes The State Of Charge Of Two Series Connected 12-Volt Batteries, Or Of Several Parallel Strings Of Series Connected Batteries.
Features
- Victron Energy Battery Balancer eliminates the effect of load imbalance and improves the life of your battery bank
- Victron Energy Battery Balancer equalizes the state of charge of two series connected 12-Volt batteries, or of several parallel strings of series connected batteries
- When the charge voltage of a 24-Volt battery system increases to more than 27-Volt, Victron Energy Battery Balancer will turn on and compare the voltage over the two series connected batteries
- Victron Energy Battery Balancer will draw a current of up to 1Amp from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge
- If needed, several balancers can be paralleled. A 48V battery bank can be balanced with three Victron Energy Battery Balancers
- See more on Amazon...
First Available: 06/07/2021
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 4.45 x 1.85 x 3.94 Inches | Weight: 0.53 Pounds
Warranty: Warranty
See On Amazon #18
Victron Energy Cyrix-ct 12/24-Volt 120 amp Intelligent Battery Combiner
Asin: B071Y7C9MM | Model: CYR010120011R | PartNumber: CYR010120011R
Ean: 5060546232179, 3700970001805, 0619639706902, 3700970003380, 0616913923864, 8436531213541, 8719076022138, 8719076029526, 5060709454318, 8719076022145
UPC: 616913923864, 619639706902
Parallel Connection In Case Of Emergency (Start Assist): Victron Energy Cyrix Can Also Be Engaged With A Push Button (Victron Energy Cyrix Remains Engaged During 30 Seconds) Or A Switch To Connect Batteries In Parallel Manually. This Is Especially Useful In Case Of Emergency When The Starter Battery Is Discharged Or Damaged.
5 Year Warranty.
No Voltage Loss: Victron Energy Cyrix Battery Combiners Are An Excellent Replacement For Diode Isolators. The Main Feature Is That There Is Virtually No Voltage Loss So That The Output Voltage Of Alternators Or Battery Chargers Does Not Need To Be Increased.
Protection Against Overheating (Due To A Long Duration Overload): Victron Energy Cyrix Will Disengage In Case Of Excessive Contact Temperature, And Reengage Again After It Has Cooled Down.
Features
- Intelligent battery monitoring to prevent unwanted switching: Victron Energy Cyrix-ct 12/24-Volt 120 amp looks at the general trend (voltage increasing or decreasing) and reverses a previous action only if the trend has reversed during a certain period of time. The time delay depends on the voltage deviation from the trend
- Protection against overheating (due to a long duration overload): Victron Energy Cyrix will disengage in case of excessive contact temperature, and reengage again after it has cooled down
- Parallel connection in case of emergency (Start Assist): Victron Energy Cyrix can also be engaged with a push button (Victron Energy Cyrix remains engaged during 30 seconds) or a switch to connect batteries in parallel manually. This is especially useful in case of emergency when the starter battery is discharged or damaged
- No voltage loss: Victron Energy Cyrix battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased
- 5 year warranty
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.81 x 1.81 x 3.15 inches | Weight: 0.02 pounds
Warranty: Warranty
See On Amazon #19
Victron Energy Blue Smart IP65 12-Volt 10 amp Battery Charger (Bluetooth)
Asin: B07FGGCYKC | Model: NT-973 | PartNumber: NT-973 | Ean: 8719076043195
This Charger Will Tend To A Lithium (Lifepo4) Or Lead Acid Battery To Maximize Performance And Increase Lifespan.
Plug And Play! Comes With Easy To Use Alligator Clips. Or, Leave The M8 Eyelets Permanently Connected To Your Battery And Simply Connect/Disconnect The Charger Using The Included Quick Connectors!.
This Charger Will Revive Even Deeply-Discharged Batteries From 0V With Its Force-Feeding Feature. Once The Battery Has Enough Voltage, Normal Charging Will Resume.
This Professional And Innovative Battery Charger Is Equipped With A Built-In Bluetooth Feature. Using The Victron Connect App, You Can Adjust Charging Settings And Monitor Real-Time And Historic Battery Charging Data. Or, Switch To Power Supply Mode To Power Dc Loads Without A Battery..
Features
- Take this water, dust, and chemical resistant charger with you wherever you go, whether it's on your boat, yacht, classic car, motorcycle, camper-van, or workshop. The Victron Energy Blue Smart IP65 Charger is the perfect solution for all your battery charging needs. Experience the ultimate power and convenience!
- This professional and innovative battery charger is equipped with a built-in Bluetooth feature. Using the Victron Connect app, you can adjust charging settings and monitor real-time and historic battery charging data. Or, switch to power supply mode to power DC loads without a battery.
- This charger will tend to a lithium (LiFePO4) or lead acid battery to maximize performance and increase lifespan
- This charger will revive even deeply-discharged batteries from 0V with its force-feeding feature. Once the battery has enough voltage, normal charging will resume
- Plug and Play! Comes with easy to use alligator clips. Or, leave the M8 eyelets permanently connected to your battery and simply connect/disconnect the charger using the included quick connectors!
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 1.77 x 7.17 x 3.19 inches | Weight: 1.98 Pounds
Warranty: Warranty
See On Amazon #20
Victron Energy BCD 802 80 amp Diode Battery Combiner (2 Batteries)
Asin: B01F713B7A | Model: BCD 802 | PartNumber: BCD 802 | Ean: 8719076020974
Failure Of One Source Will Not Interrupt Power To The Critical Load.
Warning: Hot Surface, Mount The Argo Diode Battery Combiner On Non-Flammable Surface Only!.
The Argo Battery Combiners Feature A Low Voltage Drop Thanks To The Use Of Schottky Diodes.
With A Victron Energy Diode Battery Combiner Two Or More Dc Power Sources Can Be Used In Parallel To Supply The Mission Critical Load.
Features
- Victron Energy BCD 802 80 amp Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system
- With a Victron Energy Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load
- Failure of one source will not interrupt power to the critical load
- The Argo Battery Combiners feature a low voltage drop thanks to the use of Schottky diodes
- Warning: hot surface, mount the Argo Diode Battery Combiner on non-flammable surface only!
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 2.40 x 3.00 x 4.70 inches | Weight: 1.30 pounds
Warranty: Warranty
See On Amazon
Looking For Something Else?
Search