MIDWEST MagSnips Replaceable Blade Snip - Straight Cut Regular Sheet Material Cutting Shears with All Purpose Blades & Magnesium Handles - MWT-1200
Asin: B00P7FFH06 | Model: MWT-1200 | PartNumber: MWT-1200 | Ean: 0727226130426 | UPC: 727226130426
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Lightweight And Efficient - Made With A Lightweight Magnesium Handle With Optimal Range Of Motion, This Cutter Is Easy To Use And Efficient.
Cuts Aluminum And Vinyl Siding, Roofing Materials, Metal Flashing, Linoleum, Vinyl, Rubber, Canvas, Cardboard, Screening..
Optimized Power Range Completes Cut Before Handles Bottom Out For Most Efficient Conversion Of Hand Force To Cutting Power..
Blades Are Easily Replaced Using Blade Kit Mw-M1200r..
Made In The Usa - This High Quality Midwest Tool Is Highly Durable And Made In The Usa.
3.5-Inch (88.9Mm) Length Of Cut Requires Fewer Cutting Strokes Leaving A Smooth Finished Edge..
Easily Replaceable - The Blades Are Easily Replaced Using Blade Kit Mw-M1200r.
Cuts Straight And Wide Curves. Use In Either Hand..
3.5" Length Of Cut - Requiring Fewer Cutting Strokes And Leaving A Smooth Finished Edge, These Shears Can Make 3.5 Inch Cuts.
Features
- STRAIGHT SHEET MATERIAL CUTS - These lightweight shears are made to cut aluminum, vinyl, roofing material,
- 3.5 LENGTH OF CUT - Requiring fewer cutting strokes and leaving a smooth finished edge, these shears can make 3.5 inch cuts
- LIGHTWEIGHT AND EFFICIENT - Made with a lightweight magnesium handle with optimal range of motion, this cutter is easy to use and efficient
- EASILY REPLACEABLE - The blades are easily replaced using blade kit MW-M1200R
- MADE IN THE USA - This high quality Midwest tool is highly durable and made in the USA
- 3.5-Inch (88.9mm) Length Of Cut requires fewer cutting strokes leaving a smooth finished edge.
- Optimized Power Range completes cut before handles bottom out for most efficient conversion of hand force to cutting power.
- Blades are easily replaced using blade kit MW-M1200R.
- Cuts straight and wide curves. Use in either hand.
- Cuts aluminum and vinyl siding, roofing materials, metal flashing, linoleum, vinyl, rubber, canvas, cardboard, screening.
- See more on Amazon...
Brand: Midwest Snips | Manufacturer: Midwest Tool and Cutlery
Dimensions: 14.88 x 1.25 x 4.88 Inches | Weight: 0.95 pounds
Warranty: This product carries a limited lifetime warranty. If blades or spring should break as a result of a manufacturing defect, return tool to manufacturer. This warranty does not cover any damage to this product as a result of its misuse or abuse, nor does it cover wear, dullness or damage to cutting edge resulting from misuse, abuse, extensive use, or attempts to re-sharpen. Manufacturer will determine if breakage or malfunction is result of manufacturing defect. Product will be repaired or replaced and returned or â warranty voidâ notification will be issued.Â
See On Amazon Similar To MIDWEST MagSnips Replaceable Blade Snip
#1
Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips - Straight, Left and Right Cut - M3R
Asin: B00002N5KQ | Model: M3R | PartNumber: M3R
Ean: 7429502566587, 0037103580214, 0013440012748, 0637262283676, 0777786218126, 5053440482450, 5526679992385, 7429508620696, 0752913188787, 0999992603491, 0640024976686, 0370114827900, 0637230242636, 8944467363273, 0046955099935, 0037103136442, 0799360249715, 0735090467524, 5448095653148, 0743153843963, 0060829133280, 0779975406574, 0632963686290, 0732233482925, 7147905961838, 0013161002615
UPC: 777786218126, 637230242636, 060829133280, 640024976686, 732233482925, 370114827900, 735090467524, 743153843963, 632963686290, 779975406574, 037103136442, 637262283676, 752913188787, 799360249715, 999992603491, 037103580214, 046955099935, 013161002615, 013440012748
Precision Cast Molybdenum Blades With Conk Ground Edges And Serrations For Cutting Low Carbon, Cold Rolled 18 Gauge Steel.
Spring Action For Fast, Effortless Feed.
Handles Have Built In Stops Providing Consistent Operation And Blade Opening.
Superior Design Prevents Tears At End Of Cuts By Controlling Blade Bypass And Minimizes Folding And Burrs.
Free Float Design On The Pivot Bolt Provides Longer Life.
Blade Serrations Spread Cutting Force Across Jaws Improving Cut Quality And Tool Life.
Ergonomic, Single Material Non Slip Handle Grips Provide Excellent Control And Easy Cleaning With Built In Hang Hole For Convenient Storage.
Ergonomic, Single Handed Latch Operation For Left Or Right Handed Use.
Features
- Cuts straight and slight curves with yellow handles for quick identification
- Ergonomic, single handed latch operation for left or right handed use
- Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel
- Blade serrations spread cutting force across jaws improving cut quality and tool life
- Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
- Free float design on the pivot bolt provides longer life
- Spring action for fast, effortless feed
- Handles have built in stops providing consistent operation and blade opening
- Ergonomic, single material non slip handle grips provide excellent control and easy cleaning with built in hang hole for convenient storage
- See more on Amazon...
Brand: Wiss | Manufacturer: CRESCENT
Dimensions: 1.00 x 9.75 x 3.00 inches | Weight: 0.75 pounds
Warranty: Standard Limited Lifetime
See On Amazon #2
Amazon Basics Straight Cut Aviation Snip
Asin: B07RWV14KP | Model: AMAS04 | PartNumber: AMAS04 | Ean: 0192233074948 | UPC: 192233074948
Made Of Premium Chrome Vanadium Steel Processed With A High-Frequency Heat Treatment.
Backed By An Amazon Basics Limited One-Year Warranty.
2-Colored Handle With A Rubberized Grip Helps Ensure A Secure Hold And Precise Cuts; Latch Locks Tool Shut When Not In Use To Protect The Blade; One-Handed Auto Release.
Easily Cuts Through Thin Sheets Of Aluminum Tin And Metal, Including Up To 18-Gauge Steel And Up To 22-Gauge Stainless Steel.
Features
- Straight-cut aviation tin snip with high-leverage design and serrated-edge blade for efficient cutting
- Easily cuts through thin sheets of aluminum tin and metal, including up to 18-gauge steel and up to 22-gauge stainless steel
- Made of premium chrome vanadium steel processed with a high-frequency heat treatment
- 2-colored handle with a rubberized grip helps ensure a secure hold and precise cuts; latch locks tool shut when not in use to protect the blade; one-handed auto release
- Backed by an Amazon Basics limited one-year warranty
- See more on Amazon...
Brand: Amazon Basics | Manufacturer: Amazon
Dimensions: 1.00 x 10.23 x 3.30 Inches | Weight: 0.80 Pounds
See On Amazon #3
MIDWEST Special Hardness Aviation Snip - Left Cut Offset Stainless Steel Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-SS6510L
Asin: B00PNJ1XXQ | Model: MWT-SS6510L | PartNumber: MWT-SS6510L | Ean: 0651628667207, 0651628667191, 0727226130778 | UPC: 727226130778, 651628667207, 651628667191
Pinch-Thru-Point Cuts - Forged Blades Cut 18 Gauge Cold-Rolled Steel From Beginning Of Blade All The Way To The Tip With 20% Less Effort For Easy And Precise Notch Cuts..
100% Usa Made - This Midwest Product Is American Made Using Premium Grade Steel And The Highest Quality Components. The Result Is A Reliable Long Lasting Tool You Can Count On..
Kush'n-Power Grips - Midwest's Kush'n-Power Grips Provide The Perfect Balance Of Comfort, Grip And Durability. Designed For The Professional, These Chemical Resistant Grips Offer Slip-Free Usage All Day Long..
Cuts Stainless Steel - Special Hardness Blades Are Hot Drop-Forged Of Molybdenum Alloy Steel And Austemper Heat-Treated To Provide Unequalled Strength And Edge Life. Use For Cutting Extremely Hard Materials Such As Stainless Steel, Inconel And Titanium..
Features
- LEFT CUT OFFSET AVIATION SNIPS - Designed for straight cuts and tight curving left cuts. Offset model snips are best for making long cuts and trim cuts.
- CUTS STAINLESS STEEL - Special Hardness blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated to provide unequalled strength and edge life. Use for cutting extremely hard materials such as stainless steel, inconel and titanium.
- PINCH-THRU-POINT CUTS - Forged blades cut 18 gauge cold-rolled steel from beginning of blade all the way to the tip with 20% less effort for easy and precise notch cuts.
- KUSH'N-POWER GRIPS - Midwest's Kush'N-Power grips provide the perfect balance of comfort, grip and durability. Designed for the professional, these chemical resistant grips offer slip-free usage all day long.
- 100% USA MADE - This Midwest product is American made using premium grade steel and the highest quality components. The result is a reliable long lasting tool you can count on.
- See more on Amazon...
Brand: Midwest Tool and Cutlery | Manufacturer: Midwest Tool and Cutlery
Dimensions: 0.10 x 11.50 x 3.00 inches | Weight: 0.94 pounds
See On Amazon #4
Crescent Wiss 9-1/4" Metalmaster Offset Straight and Left Cut Aviation Snips - M6R , Red
Asin: B00002N5LR | Model: M6R | PartNumber: M6R | Ean: 0637230244975, 0013440012533, 0037103136428, 0644535440384, 0037103583376, 0637262283683 | UPC: 013440012533, 637230244975, 644535440384, 637262283683, 037103136428, 037103583376
Offset Blades Keep Hands Clear Of Metal.
Non-Slip Comfort Grips Provide Superior Control And Comfortnon-Slip Comfort Grips Provide Superior Control And Comfort.
Tanto-Style Serrated Blade.
High-Speed Vibratory Finish Provides Excellent Blade Durability And A Consistent, High-End Aesthetic.
Non-Slip Comfort Grips Provide Superior Control And Comfort.
Cuts Straight Lines And Left Arcs.
Effortless Cutting And Superior Durability From The Valve-Grade Steel Return Spring.
Non-Slip, Serrated Jaws Of Tough Molybdenum Steel Hold Material Firmly And Spread Cutting Force Uniformly Across Blade Edge.
Features
- Cuts low carbon, cold-rolled 18 gauge steel
- Non-slip, serrated jaws of tough molybdenum steel hold material firmly and spread cutting force uniformly across blade edge
- Offset blades keep hands clear of metal
- Cuts straight lines and left arcs
- High-speed vibratory finish provides excellent blade durability and a consistent, high-end aesthetic
- Non-slip comfort grips provide superior control and comfort
- Non-slip comfort grips provide superior control and comfortNon-slip comfort grips provide superior control and comfort
- Tanto-style serrated blade
- Effortless cutting and superior durability from the valve-grade steel return spring
- See more on Amazon...
Brand: Wiss | Manufacturer: Cooper Hand Tools
Dimensions: 1.60 x 9.25 x 2.75 Inches | Weight: 0.87 Pounds
Warranty: Warranty
See On Amazon #5
MIDWEST Bulldog Aviation Tin Snip - Straight Cut Regular Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6716B
Asin: B00OCGQJIA | Model: MWT-6716B | PartNumber: MWT-6716B | Ean: 0727226130365, 0370121689973, 0788115043968, 0312496888926 | UPC: 370121689973, 727226130365, 312496888926, 788115043968
Pinch-Thru-Point Cuts - Forged Blades Cut 18 Gauge Cold-Rolled Steel From Beginning Of Blade All The Way To The Tip With 20 Percent Less Effort For Easy And Precise Notch Cuts..
Made In Usa - This Midwest Product Is American Made Using Premium Grade Steel And The Highest Quality Components. The Result Is A Reliable Long Lasting Tool You Can Count On..
Kush'n-Power Grips - Midwest's Kush'n-Power Chemical Resistant Grips Provide The Perfect Balance Of Comfort, Grip And Durability For Slip-Free Usage All Day Long.
Glidetech Forged Blades - Hot Drop-Forged Of Molybdenum Alloy Steel And Austemper Heat-Treated To Provide Unequalled Strength, Longest Lasting Edge Life, And The Precise Cutting Action.
Features
- STRAIGHT CUT BULLDOG AVIATION SNIPS - Designed for straight cuts and wide curving left and right cuts. Bulldog model snips are best for making trim cuts in extra thick material
- GLIDETECH FORGED BLADES - Hot drop-forged of molybdenum alloy steel and austemper heat-treated to provide unequalled strength, longest lasting edge life, and the precise cutting action
- PINCH-THRU-POINT CUTS - Forged blades cut 18 gauge cold-rolled steel from beginning of blade all the way to the tip with 20 percent less effort for easy and precise notch cuts.
- KUSH'N-POWER GRIPS - Midwest's Kush'N-Power chemical resistant grips provide the perfect balance of comfort, grip and durability for slip-free usage all day long
- MADE IN USA - This Midwest product is American made using premium grade steel and the highest quality components. The result is a reliable long lasting tool you can count on.
- See more on Amazon...
Brand: Midwest Snips | Manufacturer: Midwest Tool and Cutlery
Dimensions: 11.50 x 1.00 x 3.00 inches | Weight: 0.85 Pounds
Warranty: This product carries a limited lifetime warranty. If blades or spring should break as a result of a manufacturing defect, return tool to manufacturer. This warranty does not cover any damage to this product as a result of its misuse or abuse, nor does it cover wear, dullness or damage to cutting edge resulting from misuse, abuse, extensive use, or attempts to re-sharpen. Manufacturer will determine if breakage or malfunction is result of manufacturing defect. Product will be repaired or replaced and returned or â warranty voidâ notification will be issued.
See On Amazon #6
HURRICANE 3 pc Aviation Tin Snips Set, Metal Cutter Shear for Cut Sheet Metal, Chrome Vanadium Steel, Straight Left and Right, Ergonomical TyreGrip Handle with Hang Hole and Safety Latch
Asin: B07CTJLRT2 | Ean: 0648824020035 | UPC: 648824020035
【Cut Capacity Of Tin Snip】 With A Cutting Thickness Range Up To 18 Gauge (1.2Mm) Cold-Rolled Steel Sheet, 18 Gauge (1.2Mm) Galvanized Sheet, And 22 Gauge (0.7Mm) Stainless Steel..
【Safety And High Efficiency】Locking Latch Prevents Damage To Cutting Edge When Stored. Spring-Assisted Latch On Metal Snips For Fast One-Handed Operation. Tips- Please Always Wear Gloves When You’Re Working!.
【Comfortable Grips】Ergonomical Tyregrip Handle With Rubberized Grip For Comfort And Control..
【Package Updating】Came With A Storage Hang Bag That Can Be Easily Carry Out..
Features
- 3 Regular Cut HURRICANE 10 Inch Aviation Tin Snips. 3 Pack, Yellow Straight Cut, red Left Cut, green Right Cut. Chrome Vanadium Steel, Serrated edge blades with sanding finish for maximum strength, durability, and long lifetime. Heavy Duty Metal Cutter for Cutting Sheet Metal, copper, aluminum, plastic, thick cardboard, chicken wire, and hardware cloth.
- Package updating Came with a Storage Hang Bag that can be easily carry out.
- Cut Capacity of Tin Snip With a cutting thickness range up to 18 gauge (1.2mm) cold-rolled steel sheet, 18 gauge (1.2mm) Galvanized sheet, and 22 gauge (0.7mm) stainless steel.
- Comfortable Grips Ergonomical Tyregrip Handle with rubberized grip for comfort and control.
- Safety and High Efficiency Locking latch prevents damage to cutting edge when stored. Spring-assisted latch on metal snips for fast one-handed operation. Tips- Please always wear gloves when you re working!
- See more on Amazon...
Brand: HURRICANE | Manufacturer: Jiangsu Sainty Sumex Tools Co Ltd
Weight: 1.00 pounds
See On Amazon #7
Klein Tools 89556 Metal Cutter, Tin Snips Cut Tin, Copper, Aluminum, Vinyl, Steel and Stainless Steel, 12-Inch
Asin: B07DLY7RHJ | Model: 89556 | PartNumber: 89556 | Ean: 0092644690815 | UPC: 092644690815
Excellent For 24 Gauge Steel And 28 Gauge Stainless Steel.
Large Handles To Accommodate Gloves.
All Steel Construction For Long Life And Durability.
Easily Replaceable Cutting Blades.
Easily Cuts Tin, Copper, Aluminum, Soft Metals And Vinyl.
Full 3.5-Inch (89 Mm) Blades Cut Straight And Wide Curves.
Features
- 12-Inch long tool with high-carbon cutting blades
- Full 3.5-inch (89 mm) blades cut straight and wide curves
- Excellent for 24 gauge steel and 28 gauge stainless steel
- Easily cuts tin, copper, aluminum, soft metals and vinyl
- All steel construction for long life and durability
- Easily replaceable cutting blades
- Large handles to accommodate gloves
- See more on Amazon...
Brand: Klein Tools | Manufacturer: Klein Tools
Dimensions: 0.80 x 12.20 x 4.40 Inches | Weight: 0.84 pounds
Warranty: 1 Year Manufacturer
See On Amazon #8
IRWIN 21304ZR Tin Snip, Multi Purpose, 11-3/4-Inch (21304)
Asin: B0000EI9AQ | Model: 21304ZR | PartNumber: 21304ZR | Ean: 0100076912839, 0038548213040 | UPC: 038548213040, 100076912839
Precision-Ground Edges On The Tin Snips Ensure A Tight Grip On Each Cut For Superior Cutting Quality.
Durable Spring Washer Holds Blades Tightly Against Each Other When Cutting.
Snip Tool Features A Flat Blade That Cuts Straight And Curves.
Precision-Ground Edges On The Tin Snips Ensure A Tight Grip On Each Cut For Superior Cutting Quality.
Durable Spring Washer Holds Blades Tightly Against Each Other When Cutting.
Snip Tool Cuts Up To 24-Gauge Cold-Roll Steel And 26-Gauge Stainless-Steel.
Hot, Drop-Forged Steel Blades Provide Maximum Strength And Long Life.
Hot, Drop-Forged Steel Blades Provide Maximum Strength And Long Life.
Snip Tool Features A Flat Blade That Cuts Straight And Curves.
Features
- Snip tool cuts up to 24-gauge cold-roll steel and 26-gauge stainless-steel
- Snip tool features a flat blade that cuts straight and curves
- Precision-ground edges on the tin snips ensure a tight grip on each cut for superior cutting quality
- Hot, drop-forged steel blades provide maximum strength and long life
- Durable spring washer holds blades tightly against each other when cutting
- Snip tool cuts up to 24-gauge cold-roll steel and 26-gauge stainless-steel
- Snip tool features a flat blade that cuts straight and curves
- Precision-ground edges on the tin snips ensure a tight grip on each cut for superior cutting quality
- Hot, drop-forged steel blades provide maximum strength and long life
- Durable spring washer holds blades tightly against each other when cutting
- See more on Amazon...
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 1.00 x 12.50 x 11.60 Inches | Weight: 0.99 Pounds
Warranty: Yes
See On Amazon #9
MIDWEST Snips Forged Blade Offset Aviation Snips Set, 2-Piece - MW-P6510C
Asin: B003IWBT2K | Model: MW-P6510C | PartNumber: MW-P6510C | Ean: 0727226651013 | UPC: 727226651013
Hot Drop-Forged Blades Are Austemper Heat-Treated. Hot Drop-Forged Process Uses Grain Structure Of Steel To Produce Maximum Strength..
Cutting Capacity (Cr/Ss): 18/22.
Cut Length: 1-1/4".
Cuts "Pinch-Thru-Point" Precision Cuts Completely To Blade Tip End Which Reduces Cutting Strokes And Enables Complete And Accurate Trim Cuts..
Features
- Two piece offset aviation set include both left and right cut models. A favorite of professional sheet metal tradesman and contractors.
- Cuts Pinch-Thru-Point Precision cuts completely to blade tip end which reduces cutting strokes and enables complete and accurate trim cuts.
- Hot drop-forged blades are austemper heat-treated. Hot drop-forged process uses grain structure of steel to produce maximum strength.
- Cut Length: 1-1/4
- Cutting Capacity (CR/SS): 18/22
- See more on Amazon...
Brand: Midwest Snips | Manufacturer: Midwest Tool and Cutlery
Dimensions: 11.00 x 1.00 x 6.50 Inches
See On Amazon #10
MIDWEST Power Cutters Long Cut Snip - Straight Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6516 New
Asin: B08N18F77D | Model: MWT-6516-6 | PartNumber: MWT-6516-6
Handle Color: Blue.
Overall Length: 10 1/2 In.
Cutting Length: 2 3/8 In.
Handle Design: Ergonomic.
Features
- Standards: Meets ASME
- Handle Design: Ergonomic
- Handle Color: Blue
- Cutting Length: 2 3/8 in
- Overall Length: 10 1/2 in
- See more on Amazon...
Brand: Midwest Snips | Manufacturer: Midwest Tool and Cutlery
See On Amazon #11
CRAFTSMAN Aviation Snips, Straight Cut (CMHT73756)
Asin: B07R69YBJB | Model: CMHT73756 | PartNumber: CMHT73756 | Ean: 0885911576994 | UPC: 885911576994
Durability: Induction Hardened Cutting Edge On Snips For Sheet Metal Stays Sharp Longer (Compared To Non-Induction Hardened Jaws)..
Full Lifetime Warranty, Refer To "Warranty & Support" Section Below For Full Details.
1/4-Inch Blade Markings For Quick Precise Cuts.
Ease Of Use: Spring-Assisted Latch On Metal Snips For Fast One-Handed Operation.
Features
- CUT CAPACITY OF TIN SNIPS: Cuts up to 18GA (1.2mm) cold-rolled steel or 22GA (0.7mm) stainless steel.
- EASE OF USE: Spring-assisted latch on metal snips for fast one-handed operation
- DURABILITY: Induction hardened cutting edge on snips for sheet metal stays sharp longer (compared to non-induction hardened jaws).
- 1/4-inch blade markings for quick precise cuts
- Full Lifetime Warranty, refer to Warranty & Support section below for full details
- See more on Amazon...
Brand: CRAFTSMAN | Manufacturer: CRAFTSMAN
Weight: 0.00 Pounds
Warranty: Full Lifetime Warranty
See On Amazon #12
IRWIN Tin Snip, Flat Blade, 7-Inch (22007)
Asin: B0000EI9AR | Model: 22007 | PartNumber: 22007 | Ean: 0038548220079, 0640024947655, 0785533719840, 0100028844874 | UPC: 100028844874, 640024947655, 038548220079, 785533719840
Double-Dipped Vinyl Handles Provide Comfort..
Flat Blade (Straight-Pattern) Snips Are Best For Straight Cuts, But Can Handle Gentle Curves And Will Cut Thicker Materials Than Duckbill Snips..
Hot Drop-Forged Steel Blades Offer Maximum Strength..
Features
- Precision-ground edges on the blades ensure a tight grip on each cut for superior cutting quality.
- Hot drop-forged steel blades offer maximum strength.
- Double-dipped vinyl handles provide comfort.
- Flat Blade (straight-pattern) snips are best for straight cuts, but can handle gentle curves and will cut thicker materials than duckbill snips.
- See more on Amazon...
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 0.80 x 12.00 x 3.75 Inches | Weight: 0.57 Pounds
See On Amazon #13
MIDWEST Aviation Snip - Left Cut Upright Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6900L
Asin: B00OJ0KPG6 | Model: Midwest Tool & Cutlery - MWT-6900L | PartNumber: Midwest Tool & Cutlery - MWT-6900L | Ean: 0746767292516, 0788115204048, 0727226130709, 0746767292509, 0746767292493 | UPC: 746767292516, 727226130709, 746767292493, 788115204048, 746767292509
Strongest Handles - High Tensile Strength Steel Will Not Bend From Hand Pressure And Provides Efficient Conversion Of Hand Force To Cutting Power.
Easy Cutting - Compound Leverage Multiplies Handle Force To Cutting Blades By 8: 1 For Significantly Less Fatigue.
Comfortable Grips - Kush'n-Power Grips Conforms With The Motion Of The User's Hands And The Indented Ribs Prevent Hand And Finger Slippage.
Longest Lasting Cutting Edge - Blades Are Hot Drop-Forged Of Molybdenum Alloy Steel And Au Temper Heat-Treated For Maximum Strength And Durability.
Features
- Left Upright cut - cuts straight and tight right curves. Easiest used in left hand. Ideal for confined spaces and overhead use
- Longest lasting cutting edge - blades are hot drop-forged of molybdenum alloy steel and au temper heat-treated for maximum strength and durability
- Strongest handles - high tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power
- Comfortable grips - KUSH'N-POWER grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage
- Easy cutting - compound leverage multiplies handle force to cutting blades by 8: 1 for significantly less fatigue
- See more on Amazon...
Brand: Midwest Snips | Manufacturer: Midwest Tool & Cutlery Store
Dimensions: 10.00 x 1.25 x 5.00 Inches | Weight: 0.88 Pounds
Warranty: This product carries a limited lifetime warranty. If blades or spring should break as a result of a manufacturing defect, return tool to manufacturer. This warranty does not cover any damage to this product as a result of its misuse or abuse, nor does it cover wear, dullness or damage to cutting edge resulting from misuse, abuse, extensive use, or attempts to re-sharpen. Manufacturer will determine if breakage or malfunction is result of manufacturing defect. Product will be repaired or replaced and returned or â warranty voidâ notification will be issued.Â
See On Amazon #14
MIDWEST Power Cutters Long Cut Snip - Straight Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6516
Asin: B00OCGQJDA | Model: MWT-6516 | PartNumber: MWT-6516
Ean: 0746767504992, 0343684798451, 0727226130341, 0343684798444, 0370121664307, 0746767505005, 0650715780355, 0370121664314, 0343684798437, 0746767505012, 0746767504985, 0370121664321
UPC: 650715780355, 746767505012, 370121664314, 343684798437, 746767504985, 746767505005, 343684798444, 370121664307, 746767504992, 343684798451, 370121664321, 727226130341
Manufactured In United States.
It Is Easy To Use.
Brand: Midwest Snips | Manufacturer: Midwest Tool and Cutlery
Dimensions: 0.10 x 1.00 x 6.00 Inches | Weight: 1.05 Pounds
Warranty: This product carries a limited lifetime warranty. If blades or spring should break as a result of a manufacturing defect, return tool to manufacturer. This warranty does not cover any damage to this product as a result of its misuse or abuse, nor does it cover wear, dullness or damage to cutting edge resulting from misuse, abuse, extensive use, or attempts to re-sharpen. Manufacturer will determine if breakage or malfunction is result of manufacturing defect. Product will be repaired or replaced and returned or â warranty voidâ notification will be issued.
See On Amazon #15
Midwest Tools and Cutlery MWT-6510C Midwest Snips Forged Blade Offset Aviation Snips Set (Pack of 2)
Asin: B01J9IC5D8 | Model: MWT-6510C | PartNumber: MWT-6510C
Blades Are Hot Drop-Forged Of Molybdenum Alloy Steel And Austemper Heat-Treated. Hot Drop-Forged Process Produces Maximum Strength.
New Kush-N-Power Grip Features A Dynamic Contour Finger Stop, Soft Touch And Non-Slip Ribs.
Cut Length: 1-1/4" Cutting Capacity (Cr/Ss): 18/22.
Two Piece Offset Aviation Set Include Both Left And Right Cut Models. A Favorite Of Professional Sheet Metal Tradesman And Contractors.
Features
- Cuts "Pinch-Thru-Point" Precision cuts completely to blade tip end which reduces cutting strokes and enables complete and accurate trim cuts
- Two piece offset aviation set include both left and right cut models. A favorite of professional sheet metal tradesman and contractors
- Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated. Hot drop-forged process produces maximum strength
- Cut Length: 1-1/4 Cutting Capacity (CR/SS): 18/22
- New KUSH-N-POWER grip features a dynamic contour finger stop, soft touch and non-slip ribs
- See more on Amazon...
First Available: 03/12/2017
Brand: Midwest Snips | Manufacturer: Midwest Tools and Cutlery
See On Amazon #16
Crescent Wiss 8-1/2" EZ Utility Snip - WEZSNIP
Asin: B000GJBLG2 | Model: WEZSNIP | PartNumber: WEZSNIP | Ean: 0037103211309 | UPC: 037103211309
Spring Assist Action Minimizes Hand Fatigue.
Thumb Latch Secures Blades Closed During Storage.
Ideal For Use In The Shop, Garden, And Home.
Wire Cutting Notch In The Lower Blade.
Textured And Molded Handles For A Secure, Comfortable Grip.
Features
- Strong, stainless steel blades for corrosion resistance
- Textured and molded handles for a secure, comfortable grip
- Spring assist action minimizes hand fatigue
- Wire cutting notch in the lower blade
- Thumb latch secures blades closed during storage
- Ideal for use in the shop, garden, and home
- See more on Amazon...
Brand: Wiss | Manufacturer: WISS
Dimensions: 1.00 x 10.00 x 3.00 inches | Weight: 0.20 Pounds
Warranty: Limited Lifetime Warranty
See On Amazon #17
Midwest P6510L Forged Snips Offset Left Aviation Snip (2-Pack)
Asin: B07PSL7KG8 | Model: MWT-6510L | PartNumber: MWT-6510L | Ean: 0641927023507 | UPC: 641927023507
Comfortable Grips - Kush'n-Power Grips Conforms With The Motion Of The User's Hands And The Indented Ribs Prevent Hand And Finger Slippage.
Strongest Handles - High Tensile Strength Steel Will Not Bend From Hand Pressure And Provides Efficient Conversion Of Hand Force To Cutting Power.
Left Offset Cut - Cuts Straight And Tight Left Curves. Easiest Used In Right Hand.
Features
- LONGEST LASTING CUTTING EDGE - Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability
- LEFT OFFSET CUT - Cuts straight and tight left curves. Easiest used in right hand
- COMFORTABLE GRIPS - Kush'N-Power grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage
- STRONGEST HANDLES - High Tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power
- See more on Amazon...
Brand: Midwest Snips | Manufacturer: Midwest Tool & Cutlery
See On Amazon #18
MIDWEST Tool and Cutlery Aviation Snip - Left Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6510L
Asin: B00OCGQFP2 | Model: MWT-6510L | PartNumber: MWT-6510L
Ean: 0738325231266, 0746767219032, 0650715708670, 0726367087590, 0054278391988, 0370121677840, 0343538259954, 0370121612698, 0746767221431, 0746767414840, 0727226130310, 0654204697599, 0342388219965, 0746767416554, 0746767219018, 0738325231280, 0342388206989, 0746767195640, 0746767284511, 0746767284535, 0370121612681, 0746767219025, 0300717309688, 0370121612704, 0370121677857, 0746767445943, 0370121677833, 0746767220755, 0746767221448, 0746767219643, 0738325231273, 0300717313128, 0746767284528
UPC: 342388219965, 738325231273, 746767414840, 370121612681, 746767445943, 054278391988, 746767219643, 746767284528, 300717313128, 746767219025, 738325231280, 746767221448, 650715708670, 738325231266, 370121612698, 343538259954, 370121677840, 746767219018, 370121612704, 746767220755, 370121677833, 746767416554, 654204697599, 370121677857, 726367087590, 746767284511, 746767219032, 300717309688, 746767284535, 746767221431, 342388206989, 727226130310, 746767195640
Pinch-Thru-Point Cuts - Forged Blades Cut 18 Gauge Cold-Rolled Steel From Beginning Of Blade All The Way To The Tip With 20% Less Effort For Easy And Precise Notch Cuts..
100% Usa Made - This Midwest Product Is American Made Using Premium Grade Steel And The Highest Quality Components. The Result Is A Reliable Long Lasting Tool You Can Count On..
Kush'n-Power Grips - Midwest's Kush'n-Power Grips Provide The Perfect Balance Of Comfort, Grip And Durability. Designed For The Professional, These Chemical Resistant Grips Offer Slip-Free Usage All Day Long..
Glidetech Forged Blades - Blades Are Hot Drop-Forged Of Molybdenum Alloy Steel And Austemper Heat-Treated To Provide Unequalled Strength, Longest Lasting Edge Life, And The Most Precise Cutting Action..
Features
- LEFT CUT OFFSET AVIATION SNIPS - Designed for straight cuts and tight curving left cuts. Offset model snips are best for making long cuts and trim cuts.
- GLIDETECH FORGED BLADES - Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated to provide unequalled strength, longest lasting edge life, and the most precise cutting action.
- PINCH-THRU-POINT CUTS - Forged blades cut 18 gauge cold-rolled steel from beginning of blade all the way to the tip with 20% less effort for easy and precise notch cuts.
- KUSH'N-POWER GRIPS - Midwest's Kush'N-Power grips provide the perfect balance of comfort, grip and durability. Designed for the professional, these chemical resistant grips offer slip-free usage all day long.
- 100% USA MADE - This Midwest product is American made using premium grade steel and the highest quality components. The result is a reliable long lasting tool you can count on.
- See more on Amazon...
First Available: 12/01/2015
Brand: Midwest Snips | Manufacturer: Midwest Tool and Cutlery
Dimensions: 11.50 x 1.00 x 3.00 Inches
Warranty: Manufacturer
See On Amazon #19
DURATECH 10 Inch Aviation Tin Snips Set, Left and Right Cut, Cr-Mo Steel Blade, Ergonomical Handle with Hang Hole and Safety Latch, for Cut Sheet Metal
Asin: B0CFQ8QVW4 | Ean: 6931213200618
Cut Capacity:Our Aviation Snip Have Powerful Cutting Functions, Widely Applicable On Most Metals,With A Cutting Thickness Range Up To Stainless Steel 22 Gauge (0.7Mm), Galvanized Sheet 18 Gauge (1.2Mm), Cold-Rolled Steel Sheet 18 Gauge (1.2Mm).
Safety And High Efficiency:Easy Latch And Lock Function Keep Your Hands Safe And Sound, Which Also Prevents Damage From Cutting Edge When Stored..
Non-Slip Grips:The Soft, Contoured Grip Are Ergonomically Design, Providing A Comfort For The Professional. In Addition, The Handle Tail Hanging Hook For Convenient Storage..
Quick Cutting:The Blade Is Crafted Of Cr-Mo Steel And Boast Serrated Edges, Making It Easier To Get Crisp, Precise Cuts. The Compound Leverage Design For Less Effort, Allowing You To Cut Wire Mesh With One Hand. The Offset Head Keeps Your Fingers Away From The Curling Cut Material..
Features
- 2 Regular Cut: DURATECH aviation tin snips, include both left (red) and right (green) cut offset model for optimal cutting ability. The left (red) cut is the left side will curl up, the right (green) cut is the right side will curl up, please choose the proper snip according to your needs.
- Quick Cutting:The blade is crafted of CR-MO steel and boast serrated edges, making it easier to get crisp, precise cuts. The compound leverage design for less effort, allowing you to cut wire mesh with one hand. The offset head keeps your fingers away from the curling cut material.
- Cut Capacity:Our aviation snip have powerful cutting functions, widely applicable on most metals,with a cutting thickness range up to Stainless steel 22 gauge (0.7mm), Galvanized sheet 18 gauge (1.2mm), Cold-rolled steel sheet 18 gauge (1.2mm)
- Non-slip Grips:The soft, contoured grip are ergonomically design, providing a comfort for the professional. In addition, the handle tail hanging hook for convenient storage.
- Safety and High Efficiency:Easy latch and lock function keep your hands safe and sound, which also prevents damage from cutting edge when stored.
- See more on Amazon...
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co.,LTD.
See On Amazon #20
Milwaukee 3-Piece Aviation Snip Set - 48-22-4533
Asin: B07L3279CL | Ean: 7441733647637
Forged Alloy Steel Blades - For Maximum Tool Strength.
3 Piece Set.
Cuts: Up To 18Ga Crs (Cold Rolled Steel); 22Ga Ss (Stainless Steel).
Flush Bolt Design - Won't Hang Up On Material (Patent Pending).
Features
- One Handed Locking - Ease of use/Quick open & close (Patent Pending)
- Flush Bolt Design - Won't hang up on material (Patent Pending)
- Forged Alloy Steel Blades - For Maximum Tool Strength
- Cuts: Up to 18ga CRS (Cold Rolled Steel); 22ga SS (Stainless Steel)
- 3 Piece Set
- See more on Amazon...
Brand: Milwaukee | Manufacturer: NA
Weight: 2.10 Pounds
See On Amazon
Looking For Something Else?
Search