20 Pin JTAG Connection Cable for ARM Programming ISP IDC 10 Color Length**20CM**
Asin: B00PGT626G | Model: CAL-ID2520 | PartNumber: CAL-ID2520 | Ean: 3008059049633
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: MDFLY | Manufacturer: MDFLY
Weight: 0.04 Pounds
See On Amazon Similar To 20 Pin JTAG Connection Cable
#1
ST-Link/V2 in-Circuit debugger/Programmer for STM8 and STM32
Asin: B00SDTEM1I | Model: ST-LINK/V2 | PartNumber: ST-LINK/V2 | Ean: 0717520032137 | UPC: 717520032137
Stm8 Applications Use The Usb Full-Speed Interface To Communicate With The St Visual Develop (Stvd) Or St Visual Program (Stvp) Software..
5 V Power Supplied By A Usb Connector.
Stm32 Applications Use The Usb Full-Speed Interface To Communicate With Atollic, Iar, Keilor Tasking Integrated Development Environments..
The Single Wire Interface Module (Swim) And Jtag/Serial Wire Debugging (Swd) Interfaces Are Used To Communicate With Any Stm8 Or Stm32 Microcontroller Located On An Application Board.
Features
- The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families
- The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board
- STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software.
- STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments.
- 5 V power supplied by a USB connector
- See more on Amazon...
Brand: STMicroelectronics | Manufacturer: STMicroelectronics
Dimensions: 1.00 x 4.00 x 3.00 inches | Weight: 0.25 Pounds
See On Amazon #2
Antrader 30CM 16-Pin IDC Connector Flat Ribbon Cable with Black 2.54mm FC Dual Row Female to Female Sockets, 6 Pieces
Asin: B07FZWH9S6 | Model: 8541678463 | PartNumber: 8541678463
Wire: 28 Awg (7X36) Stranded 300V; Wire Pitch: 0.05" (1.27 Mm) Center Spacing.
6Pcs Idc Connector Flat Ribbon Cable, Applying To Digital Cameras, Digital Camcorders, Laptops, Lcd Tvs, Lcd Monitors, Suitable For Most Atmel Avr Jtag Debuggers, In-System Programmers, Isp Download, Etc..
Ribbon Cable Saves Space And Time On Circuit Interconnecting Assemblies. The Conductor Ribbon Cable Separate Easily For Clean Terminations With Standard Wire Connectors, Jacks And Pins..
Total Length Is 12" (30Cm) With 2.54Mm Female To Female 16P 2 X 8 Sockets..
Features
- Double rows, 8Pin female to 8Pin female header with both end, compatible with 2.54mm spacing pin headers.
- Total length is 12 (30cm) with 2.54mm Female to Female 16P 2 x 8 sockets.
- Wire: 28 AWG (7x36) Stranded 300V; Wire Pitch: 0.05 (1.27 mm) Center Spacing
- Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins.
- 6pcs IDC Connector flat Ribbon cable, Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc.
- See more on Amazon...
Brand: Antrader | Manufacturer: Guangzhou Openfind Electronic Commerce CO., LTD
Weight: 0.18 Pounds
See On Amazon #3
Treedix 2pcs JTAG Breakout Board Adapter Converter SWD Breakout Jtag Debug Board with 2 Row 1.27mm Pitch 10pins Female to Female IDC Connector Flat Flexible Gray Ribbon Jumper Cable 200mm for J-Link
Asin: B09DKDG7XN | Ean: 0764784798255 | UPC: 764784798255
The Distance Between The Holes In The Adapter Board Is 1.27Mm, And The Data Transmission Line Is A 10-Pin Ribbon Cable.
This Adapter Is Suitable For Segger's Jlink And Other Jtag/Swd Programmers/Debuggers. The 5V Target Powered By The Adapter Is Not Enabled By Default..
This Board Allows The Use Of Ada1675 Cables To Connect Atmel-Ice Pcba And Your Components To Debug Atmel Atmega And Atmel Arm In The Atmel Studio Environment..
It Allows Programming/Debugging Of A Circuit Board With A Small 10-Pin 1.27Mm Stepper Connector, Which Is Very Convenient To Use. Boundary Scan Can Access The Signal Logic State Inside The Chip, As Well As The State Of The Chip Pins And So On..
Features
- This is a plug-in adapter suitable for ARM-USB-OCD, ARM-USB-OCD-H, ARM-USB-TINY, ARM-USB-TINY-H
- It allows programming/debugging of a circuit board with a small 10-pin 1.27mm stepper connector, which is very convenient to use. Boundary scan can access the signal logic state inside the chip, as well as the state of the chip pins and so on.
- The distance between the holes in the adapter board is 1.27mm, and the data transmission line is a 10-pin ribbon cable
- This board allows the use of ADA1675 cables to connect Atmel-ICE PCBA and your components to debug Atmel ATmega and Atmel Arm in the Atmel studio environment.
- This adapter is suitable for Segger's JLINK and other JTAG/SWD programmers/debuggers. The 5V target powered by the adapter is not enabled by default.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 0.06 x 0.75 x 0.54 inches
See On Amazon #4
Keadic 49 Pieces FC-10 16 20 26 Pin Female Header IDC Cable Connector 2.54mm Pitch with IDC Crimp Tool, for Flat Ribbon Cable and IDC Connectors
Asin: B07WHFWMYQ | Ean: 0741376088659 | UPC: 741376088659
💗Idc Crimp Tool -------- This Crimper Is Made Of High Quality Alloy Steel, With High Hardness And Strong Toughness, Resistant To Corrosion And Rust! It Is Designed With A Rubber Handle To Provide You Comfortable Touch! Its Crimping Distance Is Range From 6 To 27Mm In Height And 9.50 In Width. Suitable For All 26-, 28- And 29- Series Idc Male Headers Or Female Sockets!.
💗100% Satisfaction Assurance -------- We Are Highly Confident With Our Products, Believing That You Will Not Regret It If You Get Them! We Also Provide You 100% Full Refund And 12 Hours Response Service! Give Us Your Trust, We Will Not Let You Down!.
💗Easy To Operate -------- You Just Need To Put The Flat Ribbon Cable And Idc Connectors That Need To Crimp In The Crimper And Press Them, Make The Crimp The Insulation Are All The Way Toward The Wire!.
💗Standard Size -------- The Pitch Of Pin Female Header Is 2.54Mm/0.1". And The Pin Header Size: ① Fc-10P -- 18 X 6 X 13Mm/0.71" X 0.24" X 0.51"; ② Fc-16P -- 25 X 6 X 13Mm/1" X 0.24" X 0.51"; ③ Fc-20P -- 30 X 6 X 13Mm/1.18" X 0.24" X 0.51"; ④ Fc-26P -- 38 X 6 X 13Mm/1.5" X 0.24" X 0.51"(L*W*H). And The Total Length Of Crimper Is 240Mm..
Features
- IDC CONNECTORS KIT -------- This idc cable connector kit includes 4 types of IDC Connector Headers, their pin number and quantity respectively are: FC-10P 20pcs, FC-16P 10pcs, FC-20P 10pcs, FC-26P 8pcs; In addition, we also prepared an Idc Crimp Tool for you, highly convenient for crimping a variety of Flat Ribbon Cable and IDC Connectors.
- STANDARD SIZE -------- The pitch of Pin Female Header is 2.54mm/0.1. And the Pin Header Size: FC-10P -- 18 x 6 x 13mm/0.71 x 0.24 x 0.51; FC-16P -- 25 x 6 x 13mm/1 x 0.24 x 0.51; FC-20P -- 30 x 6 x 13mm/1.18 x 0.24 x 0.51; FC-26P -- 38 x 6 x 13mm/1.5 x 0.24 x 0.51(L*W*H). And the total length of crimper is 240mm.
- IDC CRIMP TOOL -------- This crimper is made of high quality alloy steel, with high hardness and strong toughness, resistant to corrosion and rust! It is designed with a rubber handle to provide you comfortable touch! Its Crimping Distance is range from 6 to 27mm in height and 9.50 in width. Suitable for all 26-, 28- and 29- series IDC male headers or female sockets!
- EASY to OPERATE -------- You just need to put the flat ribbon cable and IDC connectors that need to crimp in the crimper and press them, make the crimp the insulation are all the way toward the wire!
- 100% SATISFACTION ASSURANCE -------- We are highly confident with our products, believing that you will not regret it if you get them! We also provide you 100% FULL REFUND and 12 HOURS RESPONSE service! Give us your trust, we will not let you down!
- See more on Amazon...
Brand: Keadic | Manufacturer: Keadic
See On Amazon #5
SIM&NAT 8inch / 20cm Male to Female Dupont Wire, Male to Male, Female to Female Breadboard Jumper Wire Ribbon Cables kit for Arduino Raspberry Pi 2/3 (90 PCS)
Asin: B07RX78T9L | Model: EA-DW-B-02M=90 | PartNumber: EA-DW-B-02M=90
Jumper Wire Are Easy To Separate From The Ribbon.
Package Content: 30Pcs * Male To Female Jumper Wires, 30Pcs * Male To Male Cable And 30Pcs * Female To Female Cable (Total 90Pcs).
Suitable For Arduino Breadboard Kit Project, Pcb Project, Pc Motherboard, Diy Experiment, 3D Printer And Etc..
The Pitch Of Each End Of The Wire Is 0.1 Inch (2.54Mm).
Features
- Cable Length: about 20cm / 8 inch
- The pitch of each end of the wire is 0.1 inch (2.54mm)
- jumper Wire are easy to separate from the ribbon
- Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc.
- Package content: 30PCS * male to female jumper wires, 30PCS * male to male cable and 30PCS * female to female cable (total 90pcs)
- See more on Amazon...
Brand: SIM&NAT | Manufacturer: Blair Store
See On Amazon #6
Treedix 2PCS IDC Ribbon Connector Flat Ribbon Cable Jtag Cable 1.27mm Pitch 2 Row 10 Pins Connector Female to Female Wires SWD Cable Length 200mm/7.87 in for JTAG/ISP Connecting
Asin: B09JK5HD3X | Model: TRX5-0240 | PartNumber: TRX5-0240 | Ean: 0764784798613 | UPC: 764784798613
Pitch: 1.27Mm; Connector Type: Female Connector.
Applicable To Most Atmel Avr Jtag Debuggers, System Programmers, Isp Downloads, Etc., And Also Suitable For Internal Wiring Of Office Equipment, Audio And Video Machines.
The Conductor Ribbon Cable Is Easy To Separate To Use Standard Wire Connectors, Jacks And Pins For Clean Termination.
Cable Length: 200Mm/7.87In.
Features
- This is a flat ribbon cable with 10-pin connector, which can be easily inserted directly into the PCB. The ribbon cable saves the space and time of circuit interconnection components.
- Cable length: 200mm/7.87in
- Pitch: 1.27mm; Connector type: female connector
- The conductor ribbon cable is easy to separate to use standard wire connectors, jacks and pins for clean termination
- Applicable to most Atmel AVR JTAG debuggers, system programmers, Isp downloads, etc., and also suitable for internal wiring of office equipment, audio and video machines
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 0.04 x 7.87 x 0.40 inches
See On Amazon #7
UCTRONICS Male to Female GPIO Ribbon Cable 40pin 8inch Breadboard Jumper Wires for Connection Raspberry Pi 3 2 Model B B+ w/ 3.5/5 inch TFT Touch Screen LCD Display
Asin: B07D991KMR | Model: U6033 | PartNumber: U6033
Material: High-Quantity Copper Soft Wire Material For Safe And Durable.
Application: It Can Be Used To Raspberry Pi 3 2 Model B B+ W/ 3.5/ 5 Inch Touch Tft Screen Lcd Display.
Easy Assembly:The Cables Can Be Separated To Form An Assembly Wires To Support Non-Standard Odd-Spaced Headers To Complete Other Tests.
Length: About 20 Cm / 8 Inch.
Features
- Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable
- Length: about 20 cm / 8 inch
- Material: High-quantity copper soft wire material for safe and durable
- Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests
- Application: It can be used to Raspberry Pi 3 2 Model B B+ w/ 3.5/ 5 inch Touch TFT Screen LCD display
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #8
Treedix JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Adapter Board Breakout Board Jtag Debug Board with IDC Ribbon Connector Flat Ribbon Cable Female to Female Length 200mm/7.87in
Asin: B0CNYW7QWQ | Ean: 0644197775718 | UPC: 644197775718
The Breakout Board Features Double-Sided Immersion Gold Plating, Which Prevents Oxidation And Ensures High-Quality Performance..
It's Compatible With Arm-Usb-Ocd, Arm-Usb-Ocd-H, Arm-Usb-Tiny, Arm-Usb-Tiny, As Well As Segger's Jlink And Other Jtag/Swd Programmers/Debuggers, System Programmers, Isp Downloader..
Boundary Scanning Enables Access To The Internal Signal Logic State Of The Chip And The Status Of Chip Pins, Among Other Things..
This Is A 10-Pin And 20-Pin Connector Flat Ribbon Cable, Easy To Insert Directly Into The Pcb, Ribbon Cable Saves The Space And Time Of The Circuit Interconnection Components..
Features
- This adapter board converts the traditional 2x10 (0.1"/2.54mm pitch) JTAG cable to a narrower 2x5 (0.05"/1.27mm pitch) SWD cable, making it more convenient for connecting devices such as JTAGulator or SEGGER J-Link to mini boards with a 10-pin SWD programming connector.
- This is a 10-pin and 20-pin connector flat ribbon cable, easy to insert directly into the PCB, ribbon cable saves the space and time of the circuit interconnection components.
- The breakout board features double-sided immersion gold plating, which prevents oxidation and ensures high-quality performance.
- Boundary scanning enables access to the internal signal logic state of the chip and the status of chip pins, among other things.
- It's compatible with ARM-USB-OCD, ARM-USB-OCD-H, ARM-USB-TINY, ARM-USB-TINY, as well as Segger's JLINK and other JTAG/SWD programmers/debuggers, system programmers, Isp downloader.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
See On Amazon #9
EDGELEC 120pcs 20cm Dupont Wire Male to Female Breadboard Jumper Wires 7.9 inch 1pin-1pin 2.54mm Connector for DIY Arduino Raspberry PI 10 15 20 30 40 50 100cm Optional Multicolored Ribbon Cables
Asin: B07GD1TFBR | Model: ED-DP_L20_M-F_120pcs | PartNumber: ED-DP_L20_M-F_120pcs | Ean: 0611355169856 | UPC: 611355169856
Cable Length: 20Cm (7.9 Inch) / Cable Material: 12-Core Pure Copper Wire.
For Diy Experiment / Electronic Projects / Arduino Breadboard / Pc Motherboard / Pcb Project.
Cable Features: Separable Multicolored (10 Colors) Softness Ribbon Cables.
Connector Type: Standard 2.54Mm Pitch 1Pin-1Pin Dupont Housing Connector, With Brass Nickel Plated Terminals, Provides Excellent Electrical Conductivity And Oxidation Resistance..
Features
- Package include: 20cm (7.9inch) / 3 x 40pin Male to Female jumper wires (Total 120pcs)
- Connector Type: Standard 2.54mm Pitch 1Pin-1Pin Dupont Housing Connector, with brass nickel plated terminals, provides excellent electrical conductivity and oxidation resistance.
- Cable length: 20cm (7.9 inch) / Cable material: 12-core pure copper wire
- Cable features: Separable multicolored (10 colors) softness ribbon cables
- For DIY experiment / Electronic projects / Arduino breadboard / PC motherboard / PCB project
- See more on Amazon...
Brand: EDGELEC | Manufacturer: EDGELEC
Dimensions: 3.94 x 3.94 x 0.71 inches
See On Amazon #10
Chanzon 40pcs 20cm Long Male to Female Header Jumper Wire Dupont Cable Line Connector 40 pin Solderless Multicolored for Arduino Raspberry pi Electronic Breadboard Protoboard PCB Board
Asin: B09FP23KRC | Model: DBX-FB07-24AWG-20CM-MDF-DX-40 | PartNumber: DBX-FB07-24AWG-20CM-MDF-DX-40
Compatible With Arduino, Breadboard, Raspberry Pi, Prototyping, Parallax, Pcb Project, Diy Experiment, Electronic Project, Etc..
Material: Tinned Copper Is Primarily Used For Protection Against Oxidation And Corrosion, Good For Soldering. Package: Comes With 40Pin 20Cm M-F Multicolored Jumper Wire..
Product: Individual. Type: Male To Female. Length: 20Cm. The Wire Gauge: 24 Awg. Color: Multicolored, Standard Color Scheme. 2.54Mm Pitch Headers And Socket, Proper Diameter To Fit In The Holes Of Breadboard..
Max Current Is Up To 1A With 24Awg Wire, The Entire Jumper Wire Have Been Tinned, Can Be Cut From Between And Resolder. Individual Wire Perfect For Various Applications..
Features
- Premium Quality: Sturdy male tinned copper pins never fall off, Female pins are perfectly fit for the Male one ,accurate hole-pitch: 2.54 mm. Our 11 core copper wire with low resistance have a better conductivity and more reliable than copper-clad aluminium one.
- Max current is up to 1A with 24awg wire, The entire jumper wire have been tinned, can be cut from between and resolder. Individual wire perfect for various applications.
- Compatible with arduino, breadboard, raspberry pi, prototyping, parallax, PCB project, DIY experiment, electronic project, etc.
- Product: Individual. Type: male to female. Length: 20cm. The wire gauge: 24 AWG. Color: multicolored, standard color scheme. 2.54mm pitch headers and socket, proper diameter to fit in the holes of breadboard.
- Material: Tinned copper is primarily used for protection against oxidation and corrosion, good for soldering. Package: Comes with 40pin 20cm M-F multicolored jumper wire.
- See more on Amazon...
Brand: CHANZON | Manufacturer: CHANZON
Dimensions: 0.74 x 7.09 x 5.91 inches
See On Amazon #11
Treedix 2pcs JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board Breakout Board Jtag Debug Board
Asin: B0C7G2P9P1 | Ean: 0741754915102 | UPC: 741754915102
It Allows For Programming/Debugging Of Circuit Boards Using A Small 10-Pin 1.27Mm Pitch Connector, Offering Great Convenience In Usage..
It Is Compatible With Arm-Usb-Ocd, Arm-Usb-Ocd-H, Arm-Usb-Tiny, Arm-Usb-Tiny-H, As Well As Segger's Jlink And Other Jtag/Swd Programmers/Debuggers..
Boundary Scanning Enables Access To The Internal Signal Logic State Of The Chip And The Status Of Chip Pins, Among Other Things..
The Breakout Board Features Double-Sided Immersion Gold Plating, Which Prevents Oxidation And Ensures High-Quality Performance..
Features
- This adapter board converts the traditional 2x10 (0.1"/2.54mm pitch) JTAG cable to a narrower 2x5 (0.05"/1.27mm pitch) SWD cable, making it more convenient for connecting devices such as JTAGulator or SEGGER J-Link to mini boards with a 10-pin SWD programming connector.
- The breakout board features double-sided immersion gold plating, which prevents oxidation and ensures high-quality performance.
- It allows for programming/debugging of circuit boards using a small 10-pin 1.27mm pitch connector, offering great convenience in usage.
- Boundary scanning enables access to the internal signal logic state of the chip and the status of chip pins, among other things.
- It is compatible with ARM-USB-OCD, ARM-USB-OCD-h, ARM-USB-TINY, ARM-USB-TINY-h, as well as Segger's JLINK and other JTAG/SWD programmers/debuggers.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 0.06 x 1.18 x 1.37 inches
See On Amazon #12
NOYITO Multi-Function Adapter Converter Board Suitable for JTAG J-Link V8 V9 Ulink2 ST-Link ARM STM32
Asin: B07DQGN3KS | Model: NOMFA3128 | PartNumber: NOMFA3128 | Ean: 0667797750954 | UPC: 667797750954
The Interfaces Provided By The Multi-Function Adapter Board Are As Follows: Interface 1: 2.54 Pitch 20-Pin Corner Socket X 1 (Can Be Directly Connected To The Jtag Socket);.
Interface 5: 2.54 Pitch 10-Pin Straight Socket X 1; Interface 6: 2.0 Pitch 10-Pin Straight Socket X 1; Interface 7: 2.54 Pitch 6-Pin Straight Socket X 1; Interface 8: 2.54 Pitch 4-Pin Straight Socket X 1.
Interface 2: 2.54 Pitch 20-Pin Straight Socket X 1; Interface 3: 2.0 Pitch 20-Pin Straight Socket X 1; Interface 4: 2.54 Pitch 14-Pin Straight Socket X 1..
This Adapter Board For The Common 20Pin2.54 Spacing, 20Pin 2.0 Spacing, 10Pin 2.54 Spacing, 10Pin 2.0Spacing, Jtag 14Pin 2.54 Spacing..
Features
- NOYITO Multi-function Adapter Converter Board Suitable for JTAG J-link V8 V9 Ulink2 ST-link ARM STM32
- This Adapter board for the common 20PIN2.54 spacing, 20PIN 2.0 spacing, 10PIN 2.54 spacing, 10PIN 2.0spacing, JTAG 14PIN 2.54 spacing.
- The interfaces provided by the multi-function adapter board are as follows: Interface 1: 2.54 pitch 20-pin corner socket X 1 (can be directly connected to the JTAG socket);
- Interface 2: 2.54 pitch 20-pin straight socket X 1; Interface 3: 2.0 pitch 20-pin straight socket X 1; Interface 4: 2.54 pitch 14-pin straight socket X 1.
- Interface 5: 2.54 pitch 10-pin straight socket X 1; Interface 6: 2.0 pitch 10-pin straight socket X 1; Interface 7: 2.54 pitch 6-pin straight socket X 1; Interface 8: 2.54 pitch 4-pin straight socket X 1
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.39 x 2.52 x 1.32 inches | Weight: 0.04 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #13
uxcell IDC 10 Pins Connector Flat Ribbon Cable Female Connector Length 20cm 1.27mm Pitch,2pcs
Asin: B07FW14TCF | Model: a18040700ux0053 | PartNumber: a18040700ux0053
Main Materials: Plastic;Package Content: 2Pcs X Flat Ribbon Cable.
Suitable For Internal Wiring In Office Equipment And Video Machines.
Easily And Directly Inserted Into Pcb.
Total Width: 6.4Mm / 0.25-Inch ;Connector Type: Female Connector.
Features
- 10 Pins Connector Flat Ribbon Cable,1.27mm Pitch;Length: 20cm / 7.9''
- Total Width: 6.4mm / 0.25-inch ;Connector Type: Female Connector
- Main Materials: Plastic;Package Content: 2pcs x Flat Ribbon Cable
- Easily and directly inserted into PCB
- Suitable for internal wiring in office equipment and video machines
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 5.51 x 3.94 Inches
See On Amazon #14
HiLetgo 120pcs/3x40pcs Breadboard Jumper Wires Prototype Board Dupont Wire Male to Male, Male to Female, Female to Female, 2.54mm to 2.54mm 20CM Wires Assortment Kit for Arduino Raspberry PI DIY
Asin: B077X7MKHN | Model: 3-02-0997 | PartNumber: 3-02-0997
Including 40 Pin Male To Female Jumper Wires,40 Pin Male To Male Jumper Wires, 40 Pin Female To Female Jumper Wires..
Factory Directly, 10 Tiny Copper Wires Inside Of Single Jumper Wire: High-Level Copper Wire Inside, Durable For Conductive Connection..
10 Different Colors, 120Units Copper Cable In Total, For Making Prototypes With Arduino Boards, Stepper Motor 3D Printer Etc, The Combinations Provide A Jumper For Whatever You Need. Just Peel Off..
The Cables Can Be Separated To Form An Assembly Containing The Number Of Wires You Require For Your Connection And To Support Non-Standard Odd-Spaced Headers..
Features
- 0.127mm, 36 AWG/ single root, 20cm(7.87inch)/axis; Standard 2.54mm headers and sockets.
- The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.
- Including 40 pin male to female jumper wires,40 pin male to male jumper wires, 40 pin female to female jumper wires.
- 10 different colors, 120units copper cable in total, for making prototypes with arduino boards, stepper motor 3D printer etc, The combinations provide a jumper for whatever you need. Just peel off.
- Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.11 Pounds
See On Amazon #15
Gowoops 5 PCS of GPIO Ribbon Cable Flat Wire 20cm 40pin for Raspberry Pi 3 2 Model B B+ Plus
Asin: B01H53OK5U | Model: LYSB01H53OK5U-ELECTRNCS | PartNumber: LYSB01H53OK5U-ELECTRNCS | Ean: 0705586404845 | UPC: 705586404845
Allows To Extend Standard Idc 40-Pin Cable And Can Also Be Used For Additional Applications..
Connector Type: Female Idc Connectors, Pin Pitch: 2.54Mm, Length: 20Cm / 8", Width: 51Mm / 2", Wire Range: 28Awg.
You Can Easily Connect It To The Low-Level Peripherals!.
Features
- This 40 Pin Ribbon Cable is specially designed for the Raspberry Pi.
- You can easily connect it to the low-level peripherals!
- Allows to extend standard IDC 40-Pin Cable and can also be used for additional applications.
- Connector Type: Female IDC Connectors, Pin Pitch: 2.54mm, Length: 20cm / 8, Width: 51mm / 2, Wire Range: 28AWG
- See more on Amazon...
Brand: Gowoops | Manufacturer: Gowoops
Weight: 0.02 Pounds
See On Amazon #16
Antrader IDC Flat Ribbon Cable,10 Wire (32ft) for 2.54mm Connectors, Grey
Asin: B07P77YRB2 | Model: AZAD19022506 | PartNumber: AZAD19022506
Pitch: 0.05" (1.27 Mm) Center Spacing For 2.54Mm Connectors.
Use This Flat Ribbon Cable To Build Your Own Custom Cables. Applying To Digital Cameras, Digital Camcorders, Laptops, Lcd Tvs, Lcd Monitors, Suitable For Most Atmel Avr Jtag Debuggers, In-System Programmers, Isp Download, Etc..
Wire: 10P 28 Awg (7X36) Stranded 300V Ul.
10-Wire Ribbon Cable.
Features
- 32ft./10m length
- 10-wire ribbon cable
- Pitch: 0.05 (1.27 mm) Center Spacing for 2.54mm Connectors
- Wire: 10P 28 AWG (7x36) Stranded 300V UL
- Use this flat ribbon cable to build your own custom cables. Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc.
- See more on Amazon...
Brand: Antrader | Manufacturer: Guangzhou Openfind Electronic Commerce CO., LTD
Weight: 0.38 Pounds
See On Amazon #17
uxcell F/F IDC Connector 26 Pin Flat Ribbon Cable 2.54mm Pitch 20 Inch Length
Asin: B01AG9GXV4 | Model: a15112300ux1463 | PartNumber: a15112300ux1463 | Ean: 0712662807834 | UPC: 712662807834
Net Weight: 32G; Color: Gray,Black.
Withstand Voltage: 300V; Temperature: 105C.
Connector Type: 26 Pin Female To Female Idc Connector; Pitch: 2.54Mm.
Package Content: 1 X Flat Ribbon Cable; Main Material: Plastic.
Features
- Size: 50 x 3.2 cm/20" x 1.3"(L*W); Product Name: Flat Ribbon Cable
- Package Content: 1 x Flat Ribbon Cable; Main Material: Plastic
- Net Weight: 32g; Color: Gray,Black
- Connector Type: 26 Pin Female to Female IDC Connector; Pitch: 2.54mm
- Withstand Voltage: 300V; Temperature: 105C
- See more on Amazon...
Brand: uxcell | Manufacturer: Uxcell
See On Amazon #18
Antrader 20 Sets 2.54mm Pitch Connector FC-20 Pin Straight IDC Box Headers Connector Box Headers Female Connector
Asin: B07DVXXW4Y | Ean: 0670046371473 | UPC: 670046371473
Female Connector With Polarizing Center Bump..
The Insulation Displacement (Idc) Contacts On These Connectors Allow Them To Be Quickly And Easily Crimped Onto Flat Ribbon Cable..
Idc, 20 Position, Polarized Idc Flat Ribbon Crimp Connectors These Connectors Mate With Any Standard 0.1" Spaced Dual-Row Pin Headers..
2X10 Pin Fc-20P Dual Row Idc Female Socket Connector..
Features
- Package Content: 20pcs x IDC Connector Header
- 2x10 Pin FC-20P Dual Row IDC Female Socket Connector.
- Female connector with polarizing center bump.
- IDC, 20 Position, Polarized IDC flat ribbon crimp connectors these connectors mate with any standard 0.1 spaced dual-row pin headers.
- The insulation displacement (IDC) contacts on these connectors allow them to be quickly and easily crimped onto flat ribbon cable.
- See more on Amazon...
Brand: Antrader | Manufacturer: Guangzhou Openfind Electronic Commerce CO., LTD
See On Amazon #19
SamIdea 2-Pack 40pin Male to Female IDC GPIO Rainbow Ribbon Cable Breadboard Jumper Wires for TFT Touch Screen LCD Display Raspberry Pi A+/B+/3 B, 20cm/8"
Asin: B07CGM83QL | Model: SAM2018041701EA | PartNumber: SAM2018041701EA | Ean: 0608754971319, 0749882623753 | UPC: 749882623753, 608754971319
Pin Pitch: 2.54 Mm,Their Diagram As Product Image Show;2X40 Pin Male To Female Idc 2.54Mm Pitch Ribbon Cable Flat Gpio Cable;.
Application: Raspberry Pi 3 2 Model B B+ W/ 3.5/ 5 Inch Touch Tft Screen Lcd Display.
Gpio 40P 40-Pin Rainbow Ribbon Cable.Raspberry Pi 3 2 Model B B+ And 3.5¡± 5 Inch Tft Touchscreen Lcd Display Are Not Including..
Cable Length:8",Number Of Pins: 40Pin;.
Features
- 8" 40 Pin Ribbon Cable for Raspberry pi 3B ,Raspberry pi 2 model B,Raspberry pi 1B+, Raspberry pi 1A+,Raspberry pi zero W, Raspberry pi zero;
- Cable Length:8,Number of Pins: 40pin;
- Pin Pitch: 2.54 mm,Their Diagram as Product image show;2x40 Pin Male to female IDC 2.54mm pitch ribbon cable flat GPIO Cable;
- GPIO 40P 40-pin Rainbow Ribbon Cable.Raspberry Pi 3 2 Model B B+ and 3.5 5 inch TFT touchscreen LCD display are not including.
- Application: Raspberry Pi 3 2 Model B B+ w/ 3.5/ 5 inch Touch TFT Screen LCD display
- See more on Amazon...
Brand: SamIdea | Manufacturer: SamIdea
Dimensions: 0.66 x 2.00 x 2.00 inches
See On Amazon #20
Aliotech 120pcs Assorted Color Dupont Wire 40pin Female to Male, 40pin Female to Female, 40pin Male to Male Breadboard Jumper Wires Ribbon Cables Kit for Arduino/DIY/Raspberry Pi 2 3/debug Using
Asin: B094G7VWCP | Ean: 0727536769989 | UPC: 727536769989
10 Different Colors, 120Units Copper Cable In Total, For Making Prototypes With Arduino Boards, Stepper Motor 3D Printer Etc, The Combinations Provide A Jumper For Whatever You Need. Just Peel Off..
Each Cable Length: About 20 Cm /8-Inch, Also Can Be Soldering On Test Point Of Pcba If You Need To Dubug Prototype Board..
10 Tiny Copper Wires Inside Of Single Jumper Wire: High-Level Copper Wire Inside, Durable For Conductive Connection..
Those Cables Can Be Separated To Form An Assembly Containing The Number Of Wires You Require For Your Connection And To Support Non-Standard Odd-Spaced Headers..
Features
- Package includes 20pcs/3x40pcs Dupont wires, Including 1X 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female Breadboard Jumper Wires Ribbon Cables
- Those cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.
- 10 different colors, 120units copper cable in total, for making prototypes with arduino boards, stepper motor 3D printer etc, The combinations provide a jumper for whatever you need. Just peel off.
- 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection.
- Each cable length: about 20 cm /8-inch, also can be soldering on test point of PCBA if you need to dubug prototype board.
- See more on Amazon...
Brand: Aliotech | Manufacturer: DaDa MFG
See On Amazon
Looking For Something Else?
Search