HSS 4 Flute Single End and End Mill [Set of 2] Size: 3/16" x 3/8"
Asin: B00QFEHEDG
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Qualtech | Manufacturer: Qualtech
Weight: 0.00 Pounds
See On Amazon Similar To HSS 4 Flute Single End
#1
Greenfield Threading 357082 GT/VTD 1/4-20NC SPGP H3 3FL GP Plug Spiral Point Tap
Asin: B007W59M3M | Model: 357082 | PartNumber: 357082 | Ean: 0662355132722 | UPC: 662355132722
Thread Length (Metric): 16.00Mm.
Thread Size: 1/4-Inch; Thread Tolerance: 2B.
Thread Pitch: 20.
Thread Length: 0.6300-Inch.
Features
- Thread form: unc
- Thread length: 0.6300-Inch
- Thread length (metric): 16.00Mm
- Thread pitch: 20
- Thread size: 1/4-inch; thread tolerance: 2B
- See more on Amazon...
Brand: Vermont Tap & Die | Manufacturer: Greenfield Industries
Dimensions: 0.40 x 3.20 x 0.40 inches | Weight: 0.04 Pounds
See On Amazon #2
DEWALT Drill Bit Set, 21-Piece, 135 Degree Split Point, 31 Degree Helix, Black Oxide Coated, For Plastic, Wood and Metal (DWA1181)
Asin: B079VJMH6T | Model: DWA1181 | PartNumber: DWA1181 | Ean: 0885911426749 | UPC: 885911426749
Black Oxide Coating Helps Resist Corrosion And Increase Durability, So Your Drill Bits Last Longer.
31° Helix Reduces Over Aggressiveness Of True Parabolic Flute, Making It Ideal For Drilling Deep Holes.
135° Split-Point Tips Drill On Contact And Prevents Walking On The Hard Surface You’Re Working On.
Parabolic Flute Design Increases Chip Ejection In Metal And Wood Drilling Applications.
Features
- DEWALT 21-pack black oxide twist drill bit set is ideal for general-purpose drilling materials like metal, hardwood, softwood, PVC and fiberglass
- Parabolic flute design increases chip ejection in metal and wood drilling applications
- Black oxide coating helps resist corrosion and increase durability, so your drill bits last longer
- 135 Split-point tips drill on contact and prevents walking on the hard surface you re working on
- 31 Helix reduces over aggressiveness of true parabolic flute, making it ideal for drilling deep holes
- See more on Amazon...
Brand: DEWALT | Manufacturer: DEWALT
Dimensions: 8.75 x 8.75 x 1.38 inches | Weight: 1.00 Pounds
See On Amazon #3
ZELCAN 10 Sizes Titanium Step Drill Bit, 1/4 to 1-3/8 Inches High Speed Steel Drill Cone Bits for Sheet Metal Hole Drilling Cutting, HSS Multi Size Hole Stepped Up Unibit for DIY Lovers Electrician
Asin: B076QC5BWR | Model: SDB-2017-01 | PartNumber: SDB-2017-01
Revolutionary Design ----- Tri-Flatted Shank Fits Into Power Tools Chuck Securely And Eliminates Slip; Two-Flute Design Clears Chips Faster And Allows Particles To Escape Easily..
A Must-Have For Handyman Or Professionals ----- Perfect For Home Repairs And Light Jobs Such As Drilling Holes In Plastic, Aluminum, Copper, Iron And Many Other Types Of Sheet Metal (Excluding Steel Or Any Other Harder Metal)..
Includes 10 Step Sizes ----- 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8"..
Titanium Coating ----- Coated With Titanium, This Step Drill Set Performs Well In Heat, Corrosion And Rust Resistance..
Features
- Durable HSS Drill Bit ----- High-speed steel makes it last longer than others, titanium coating ensure easily cut through iron sheets, aluminum sheets, copper & plastic & wood board and many other types of sheet metal with ease, and it can automatically deburr holes while drilling to keep the drill bit clean.
- Titanium Coating ----- Coated with titanium, this step drill set performs well in heat, corrosion and rust resistance.
- Revolutionary Design ----- Tri-flatted shank fits into power tools chuck securely and eliminates slip; two-flute design clears chips faster and allows particles to escape easily.
- Includes 10 Step Sizes ----- 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8.
- A Must-Have for Handyman or Professionals ----- Perfect for home repairs and light jobs such as drilling holes in plastic, aluminum, copper, iron and many other types of sheet metal (excluding steel or any other harder metal).
- See more on Amazon...
Brand: ZELCAN | Manufacturer: ZELCAN
See On Amazon #4
Fisch Brad Point Drill Bits (5mm x 86mm) - Premium Drill Bits for Soft, Hard, Veneered and Laminated Wood, MDF and Acrylic Glass - Beveled Edge for Fast, Easy Cutting - FSF-003960 - Made in Austria
Asin: B00CE94AAQ | Model: FSF-003960 | PartNumber: FSF-003960 | Ean: 9002696003960
For Use In Soft, Hard, Exotic, Veneered And Laminated Wood As Well As Mdf And Even Acrylic Glass.
Made In Austria.
Beveled Edge Leads To A Perfect Drilling Of The Diameter Without Any Deviation.
Features
- Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled
- Beveled edge leads to a perfect drilling of the diameter without any deviation
- For use in soft, hard, exotic, veneered and laminated wood as well as MDF and even acrylic glass
- Made in Austria
- See more on Amazon...
Brand: Fisch | Manufacturer: fishypea-21532
Dimensions: 0.50 x 6.25 x 1.50 inches | Weight: 0.04 Pounds
See On Amazon #5
COMOWARE Number Size Drill Bit Set 60pcs- Jobber Length Drill Bits, Wire Gauge 1 to 60, Black and Gold Finish, 135 Split Point, High Speed Steel with Metal Indexed Storage Case
Asin: B07RQKXS98 | Model: JobberBG-60N | PartNumber: JobberBG-60N | Ean: 0753594137828 | UPC: 753594137828
Professional And Widely Use - Great Drill Bits Set For Metal/ Wood/ Plastic. Suitable For Home Diy, And General Building/ Engineering/ Woodworking Use..
Organized Holder - Set Includes The Drill Bit Holder With Size Index For Easy Storage And Organizing..
Set Including - The Set Includes Wire Gage Size #1 To #60, Can Meet Your Different Demands Perfectly..
135-Degree Point Tip & Twist Design - Increases Cutting Speed With Self-Centering And Prevents Walking, Clears Chips And Particles Faster. Produced By Precision Fully Ground Which Ensures Chips Move Smoothly..
Features
- High Quality Material - Versatile general-purpose drill bit set, High Speed Steel, black and gold finish resists corrosion and increases the hardness of the drill bit.
- 135-degree Point Tip & Twist Design - Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. Produced by precision fully ground which ensures chips move smoothly.
- Professional and Widely Use - Great drill bits set for metal/ wood/ plastic. Suitable for Home DIY, and General Building/ Engineering/ Woodworking Use.
- Set Including - The set includes wire gage size #1 to #60, can meet your different demands perfectly.
- Organized Holder - Set includes the drill bit holder with size index for easy storage and organizing.
- See more on Amazon...
Brand: COMOWARE | Manufacturer: COMOWARE
Dimensions: 5.10 x 2.20 x 4.10 inches | Weight: 1.00 pounds
See On Amazon #6
ColumPRO 3PCS Cobalt Single-End Countersink Chamfer Tool Set - Heavy-Duty M35 90-Degree Countersink Bits for Metal, Stainless Steel, Copper, Wood, Fiberboard, 2-5, 10-15, 15-20MM,SAE 1/4"-3/4"
Asin: B0CJFBS7DM
【Versatile Application】Our Drill Bits Are Compatible For Use With A Range Of Drilling Machines, Table Drills, Milling Machines, Cordless Drills And Impact Drivers. Perfect For Machinists, Diy Enthusiasts And Homeowners..
【Comprehensive Set】This Set Includes 3 Drill Bits In Varying Sizes, With Each Of The 2-5Mm, 10-15Mm And 15-20Mm Countersink Chamfer Tools Included, Providing You With A Complete Package For All Your Drilling Needs..
【Portable & Convenient】Our Countersink Chamfer Tools Come With Individual Storage Cases For Easy Portability. Say Goodbye To Lost Bits And Restless Searches For The Right Tool..
【Impressive Performance】Used After Pre-Drilling For Screws Or Deburring Holes As Well As Chamfering The Edge Of A Part, They Cut Cleanly And Are Chatter-Free. The Cone Tip Assures Accurate Centering, Also The Enlarged Spiral Flute Prevents Chips From Clogging And Ejects Chips Rapidly. Designed To Handle Tough Materials Like Stainless Steel And Other High-Performance Alloys..
Features
- Premium Quality Crafted from M35 Cobalt High Speed Steel with cobalt TiAlN coating, our countersink drill bits boast unparalleled toughness, high temperature threshold and long-term durability, delivering consistently exceptional results.
- Impressive Performance Used after pre-drilling for screws or deburring holes as well as chamfering the edge of a part, they cut cleanly and are chatter-free. The cone tip assures accurate centering, also the enlarged spiral flute prevents chips from clogging and ejects chips rapidly. Designed to handle tough materials like stainless steel and other high-performance alloys.
- Versatile Application Our drill bits are compatible for use with a range of drilling machines, table drills, milling machines, cordless drills and impact drivers. Perfect for machinists, DIY enthusiasts and homeowners.
- Portable & Convenient Our countersink chamfer tools come with individual storage cases for easy portability. Say goodbye to lost bits and restless searches for the right tool.
- Comprehensive Set This set includes 3 drill bits in varying sizes, with each of the 2-5MM, 10-15MM and 15-20MM countersink chamfer tools included, providing you with a complete package for all your drilling needs.
- See more on Amazon...
Brand: ColumPRO | Manufacturer: ColumPRO
See On Amazon #7
uxcell M3 x 0.5 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B097666SK2 | Model: a20010400ux0067 | PartNumber: a20010400ux0067
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M3 x 0.5 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #8
joleully 1/2" Carbide Square End Mill, HRC 45 Deg Single End 4 Flute AlTiN Coating Mill Bits
Asin: B082CGHRDR | Model: 01 | PartNumber: 01 | Ean: 8414806134357
Coating: Altin, High Aluminum Content Provides Excellent Hot Hardness And Oxidation Resistance..
Flutes:4 Flutes,High Rigidity ,Widely Used In Shallow Slot,Profile Milling,And Finish Machining..
Hrc 45 Deg :Carbide End Mill Tools Excel At Working Carbon Steels (~ Hb225), Alloy Steels (Hb225 ~ 325), Pre-Hardened Steels (Up To Hrc45), Hardened Steels (Hrc40 ~ 45), Cast Iron..
Material: Made Of Micro Grain Carbide. Carbide Has Higher Hardness And Wear Resistance And Excellent Cutting Performance Than High-Speed Steel..
Features
- Package Included: 1pcs 1/2" carbide square end Mill
- Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
- Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
- HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
- Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
- See more on Amazon...
Brand: joleully | Manufacturer: Home of quality tools
Dimensions: 0.39 x 0.39 x 2.76 inches | Weight: 111.40 Grams
See On Amazon #9
Vouyar Cobalt Steel Single End Countersink Drill Bit with Cobalt Coating Finish for Hard Metal Wood, 90 Degree M35 HSS, 8MM Round Shank, 14MM Body Diameter
Asin: B0BVW1HKFZ | Model: KMCoCDB002 | PartNumber: KMCoCDB002
Pro Compatibility For Professional Machinist And Diy Enthusiasts: Round Shank Can Be Fitted With Hand Drills And Bench Drills. We Recommend Using Bench Drills For Optimal Results When Working With Hard Alloys..
90 Degree Cutting Angle, Countersinks 5 - 10 Mm..
The Spiral Flutes Prevent Chips From Clogging, Making Your Work More Efficient..
Cobalt Coating Helps With Wear And Thermal. Please Be Reminded That The Countersinking Performance Will Not Be Impacted Even If Coatings Are Worn Down. The Wear And Tear Of Coating Is Normal And The Performance Relies On Hardness Of The Countersink Bit Itself..
Features
- M35 Cobalt HSS: Super tough, resistant to wear, high thermal threshold. Designed for tackling tough materials like stainless steel and other high-performance alloys. Please ensure sufficient lubrication and cooling in extensive uses.
- Cobalt coating helps with wear and thermal. Please be reminded that the countersinking performance will not be impacted even if coatings are worn down. The wear and tear of coating is normal and the performance relies on hardness of the countersink bit itself.
- PRO compatibility for professional machinist and DIY enthusiasts: Round shank can be fitted with hand drills and bench drills. We recommend using bench drills for optimal results when working with hard alloys.
- The spiral flutes prevent chips from clogging, making your work more efficient.
- 90 degree cutting angle, countersinks 5 - 10 mm.
- See more on Amazon...
Brand: Vouyar | Manufacturer: Vouyar
See On Amazon #10
TJATSE 5Pcs 1/4 Inch Aluma Cut Carbide Burr Set 4.4" Long Shank Single Cut Tungsten Rotary Burr Files CNC Engraving Cut Metal Carving Polishing Drilling Tool Kits
Asin: B08BCHG2L6 | Model: TS-NF-5sets-L | PartNumber: TS-NF-5sets-L | Ean: 0705644747075 | UPC: 705644747075
【Extended Long Shank】: In The Grinding Process, The Special Extension Long Handle Design Is Great For Hard To Reach Areas Of Porting And Reduced Operator Fatigue Due To High Performance Applications..
【Tjatse Brand Warranty】: Packed With An Great Tool Carry Case For Safety Storage And Protection. Tjatse Provides An One-Year No Questions Asked Replacement Warranty And Friendly Customer Service. We Aim To Provide Solutions For Industry Through Both Our Products And Professional Service..
【Advances Tunsten Material】:100% Raw Virgin Tungsten Carbide Burrs That The Service Life Is Very Long, 10 Times Higher Than The Durability Of Other Hss Cutter And 200 Times More Than The Small Wheel Durability. Hardness Can Reach To Hrc70, Sharp And Sturdy..
【Single Cut Edge Design】:The Single Cutting Edge Design Provides Large, Wide Flutes Evacuate The Large Chips Easily And Also Prevent Iron-Chip Accumulate And Over-Heat Cause Cutter Head Damage. Using A Double Cut Burr On Aluminum Will Just Gum It Up, Heat It Up, And End Up Pissing You Off..
Features
- ALUMINUM CUT CARBIDE BURRS : This set included 5pcs NF carbide rotary burr, standard aluma cut head with 1/4" shank, 3/8" head diameter, 3/4" flute length, 4.4 total length. NF Carbide Burrs are designed for use on aluminum, non-ferrous metals, soft steel, reinforced plastics and other soft materials.
- SINGLE CUT EDGE DESIGN :The single cutting edge design provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. Using a double cut burr on aluminum will just gum it up, heat it up, and end up pissing you off.
- EXTENDED LONG SHANK : In the grinding process, the special extension long handle design is great for hard to reach areas of porting and reduced operator fatigue due to high performance applications.
- ADVANCES TUNSTEN MATERIAL :100% raw virgin tungsten carbide burrs that the service life is very long, 10 times higher than the durability of other HSS cutter and 200 times more than the small wheel durability. Hardness can reach to HRC70, sharp and sturdy.
- TJATSE BRAND WARRANTY : Packed with an great tool carry case for safety storage and protection. TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service.
- See more on Amazon...
Brand: TJATSE | Manufacturer: TJATSE
See On Amazon #11
Shars 3/16-3/4" 4 Flute HSS Single End Center Cut End Mill Set 10PCS 404-5872 M)
Asin: B082325KW2
Brand: Shars | Manufacturer: Shars
See On Amazon #12
ATOPLEE Countersink Drill Bit Set,4pcs 90 Degree High Speed Steel Counter Sinker Drill Bits for Wood,Metal, Fiberboard, Plywood, Plastic, PVC
Asin: B00M7K9H5K | Model: 12110005 | PartNumber: 12110005
【Size】Chamfer Range:2-5Mm, 5-10Mm, 10-15Mm, 15-20Mm；Shank Diameter: 6Mm, 8Mm, 10Mm, 12Mm；Head Diameter: 10Mm, 14Mm, 21Mm, 33Mm..
【Suitable Machines】Suitable For Drilling Machines, Table Drills, Machining Centres, Milling Machines.But Hand Drills Are Not Allowed..
【Choose The Right Size For The Job 】 For Example, If You Need To Chamfer To 16Mm, You Need To Choose The 15-20Mm Countersink Drill That Covers The Working Range..
【Package Included】4 X Countersink And Deburring Tool..
【Wide Range Of Use】 Suitable For Processing And Reaming Of Steel, Iron, Aluminium Alloy, Copper, Wood, Plastic And Other Materials, Not For Direct Use In Opening Holes. Tile, Concrete, Walls, Stone, Etc. Are Not Allowed To Be Used..
【Tips】There May Be Slight Burrs On The Surface Of The Product, But It Does Not Affect The Use.If You Have Any Questions About The Product, Please Feel Free To Contact Us, We Will Try Our Best To Solve The Problem For You ..
【Material】 High Speed Steel 4241. It Is Suitable For Softer Materials With Hardness Below 25°, Such As Thin Iron Plates, Insulating Plates, And Pvc Plates. It Is Not Suitable For Materials That Are Too Thick Or Too Hard..
Features
- Note Recommended speed of countersink drill bit: 500-1500RPM . The harder the plate and the larger the diameter of the chamfering drill, the slower the required speed, and it is recommended to use with cutting fluid to reduce wear.
- Material High speed steel 4241. It is suitable for softer materials with hardness below 25 , such as thin iron plates, insulating plates, and PVC plates. It is not suitable for materials that are too thick or too hard.
- Size Chamfer Range:2-5mm, 5-10mm, 10-15mm, 15-20mm Shank Diameter: 6mm, 8mm, 10mm, 12mm Head Diameter: 10mm, 14mm, 21mm, 33mm.
- Tips There may be slight burrs on the surface of the product, but it does not affect the use.If you have any questions about the product, please feel free to contact us, we will try our best to solve the problem for you .
- Package Included 4 x Countersink and Deburring Tool.
- Wide Range of Use Suitable for processing and reaming of steel, iron, aluminium alloy, copper, wood, plastic and other materials, not for direct use in opening holes. Tile, concrete, walls, stone, etc. are not allowed to be used.
- Suitable Machines Suitable for drilling machines, table drills, machining centres, milling machines.But hand drills are not allowed.
- Choose the Right Size for the Job For example, if you need to chamfer to 16mm, you need to choose the 15-20mm countersink drill that covers the working range.
- See more on Amazon...
Brand: ATOPLEE | Manufacturer: ATOPLEE
Weight: 0.55 Pounds
See On Amazon #13
Carbide End Mills Up & Down Cut 1/8 Inch Shank,CNC Spiral Router Bits(3.175x22mm) Compression Bit 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Composite Multilayer Pack of 5
Asin: B073RK6F8N | Model: 401030022 | PartNumber: 401030022 | Ean: 0727670343687 | UPC: 727670343687
Due To The Great Hardness Of Solid Tungsten Carbide, It Provides Excellent Abrasive And Wear-Resistance, Bits Stay Balanced During High Speed Rotation Process.
Double Flute Spiral Solid Carbide Up-Down Cut End Mill Router Bits Are Widely Used For Cnc Engraving, Milling, Roughing, Hollowing, 3D Sculpturing Purposes.
Fast Chip-Removal Volume And Speed, Non-Stick With Bits, Suitable For Composite Multilayer Board, Hard Wood, Polywood, Acrylic.
The Unique Flute Design Makes Cutting Process Easier And Faster, Smooth Cutting Without 2Nd Polishing Process, Altin-Coated Improved The Bits Service Life.
Features
- Up Down Cut,1/8" Shank X 1/8"Cutting Dia, 22mm Flute Length with 2 Spiral Flutes, Total length 45 mm, 5 pieces per pack
- The Unique Flute Design makes cutting process easier and faster, Smooth Cutting Without 2nd polishing process, ALTIN-Coated Improved the bits service life
- Due to the Great hardness of solid Tungsten carbide, it provides excellent abrasive and wear-resistance, Bits Stay Balanced during High Speed rotation process
- Fast Chip-Removal volume and Speed, Non-stick With bits, Suitable For Composite multilayer board, hard wood, polywood, acrylic
- Double Flute Spiral Solid Carbide Up-Down Cut End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes
- See more on Amazon...
Brand: HOZLY | Manufacturer: HOZLY
See On Amazon #14
YG-1 - F4343 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance
Asin: B00F8T4Z18 | Model: F4343 | PartNumber: F4343 | Ean: 7241871141567
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #15
YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M4-0.7 Thread Size, D4 Tolerance
Asin: B00F8UQR68 | Model: G4244 | PartNumber: G4244 | Ean: 5899405926283
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #16
Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set
Asin: B08F2Q3BYL | Model: Rocaris | PartNumber: Rocaris | Ean: 0194230309207 | UPC: 194230309207
- Taps Are Designed With Spiral Flutes Is Conducive To Remove Crumbs, Not Easily Broken Tap..
- These Hss Taps Are Great Tools Used To Create Screw Threads, To Cut Or Form The Female Portion Of The Mating Pair..
- They Are Used To Cut New Threads Or Repair Damaged Threads, You Will Have A Smooth Tapping Experience With Them..
- There Are Total 9 Pieces Of Taps In Different Sizes From M2 To M12 That You Can Use For Tapping Various Threads..
Features
- - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance.
- - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads.
- - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap.
- - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them.
- - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair.
- See more on Amazon...
Brand: Rocaris | Manufacturer: Rocaris
Weight: 0.22 pounds
See On Amazon #17
Single End 4 Flute Center Cutting End Mill 6PCS Set 1/8",3/16",1/4",5/16",3/8",1/2" with 3/8" Shank with Plastic Stand
Asin: B075L5J7S9 | Model: 130-005 | PartNumber: 130-005 | Ean: 0743790434272, 0722704103077 | UPC: 722704103077, 743790434272
3/8" Shank Dia. Overall Length: 2.5".
Plastic Stand.
Including 1/8",3/16",1/4",5/16",3/8",1/2" Cuttng Dia..
High Speed Steel, Center Cutting.
Features
- Single End, 4 Flute
- High Speed Steel, Center Cutting
- 3/8 Shank Dia. Overall Length: 2.5
- Including 1/8,3/16,1/4,5/16,3/8,1/2 Cuttng Dia.
- Plastic Stand
- See more on Amazon...
Brand: LLDSIMEX | Manufacturer: LLDSIMEX
See On Amazon #18
HHIP 5802-0437 7/16" x 3/8" 4 Flute High Speed Steel Single End Center Cut End Mill
Asin: B01ADBIOK8 | Model: 5802-0437 | PartNumber: 5802-0437 | Ean: 0769053054605 | UPC: 769053054605
For Profiling, Shoulder Milling And Finishing Operations.
For Light To Medium Removal Rates And Obtaining Better Surface Finishes In Steels And Steel Alloys.
Used For General Purpose Machining Of Both Ferrous And Nonferrous Materials.
Center Cutting.
Features
- Ground From Solid
- Center Cutting
- For profiling, shoulder milling and finishing operations
- Used for general purpose machining of both ferrous and nonferrous materials
- For light to medium removal rates and obtaining better surface finishes in steels and steel alloys
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 6.00 x 3.00 x 1.00 inches | Weight: 0.07 Pounds
See On Amazon #19
YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance
Asin: B00F8T68OK | Model: F4483 | PartNumber: F4483 | Ean: 7535001296945
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.75-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.75-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 Pounds
See On Amazon #20
YG-1 - F4283 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance
Asin: B00F8T4BXU | Model: F4283 | PartNumber: F4283
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search