Adafruit Electret Microphone Amplifier - MAX9814 with Auto Gain Control [ADA1713]
Asin: B00SLYAI9K | Model: FBA_ADA1713 | PartNumber: FBA_ADA1713 | Ean: 0711978442593, 0748347526912, 5697232113155 | UPC: 748347526912, 711978442593
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Great For When You Want To Record Or Detect Audio In A Setting Where Levels Change.
Can Be Easily Used With Any Analog/Digital Converter That Is Up To 3.3V Input.
Built In Automatic Gain Control.
Features
- Add an ear to your project with this well-designed electret microphone amplifier
- Built in automatic gain control
- Great for when you want to record or detect audio in a setting where levels change
- Can be easily used with any Analog/Digital converter that is up to 3.3V input
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.59 x 3.94 x 2.36 inches | Weight: 0.01 Pounds
See On Amazon Similar To Adafruit Electret Microphone Amplifier MAX9814
#1
Cylewet 10Pcs Cylindrical Electret Condenser Microphone Pickup with 2 Pins 9 7mm for Arduino (Pack of 10) CYT1013
Asin: B01N0VMN9P | Model: 7545900980 | PartNumber: 7545900980 | Ean: 0717850057732 | UPC: 717850057732
Sensitivity: -48-66Db
.
Current Consumption: Max 500Ua
.
Frequency Range: 50 20Khz
.
Length: 7Mm/ 0.28Inches
.
Features
- Diameter: 9mm/ 0.35inches
- Length: 7mm/ 0.28inches
- Sensitivity: -48 66dB
- Frequency Range: 50 20KHz
- Current Consumption: Max 500uA
- See more on Amazon...
Brand: Cylewet | Manufacturer: Qianxin
Weight: 0.00 Pounds
See On Amazon #2
6 Pieces Electret Microphone Amplifier Module MAX4466 Adjustable Gain Blue Breakout Board
Asin: B08N4FNFTR | Model: Weewooday-Microphone Amplifier-01 | PartNumber: Weewooday-Microphone Amplifier-01
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Power Supply Noise Rejection Function: The Amplifier Has Good Power Supply Noise Rejection.
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100Kω) Rail-To-Rail Output; Quiescent Power Supply Current: <24Μa; Gain Bandwidth: 600Khz.
Features
- Application: MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100k ) rail-to-rail output; Quiescent power supply current: <24 A; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- Power supply noise rejection function: the amplifier has good power supply noise rejection
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #3
Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 [ADA2130]
Asin: B00PY2YSI4 | Model: 2130 | PartNumber: 2130 | Ean: 3700386521300, 0711978442135, 0748347525977 | UPC: 748347525977, 711978442135
Built In Thermal And Over-Current Protection.
Output Is "Bridge Tied" Meaning The Output Pins Connect Directly To The Speaker Pins, No Connection To Ground.
Fixed 24Db Gain, Onboard Trim Potentiometer For Adjusting Input Volume..
Very Efficient Class-D Controller Amp.
Features
- Delivers up to 2.5 Watts into 4-8 ohm impedance speakers
- Very efficient Class-D controller amp
- Built in thermal and over-current protection
- Fixed 24dB gain, onboard trim potentiometer for adjusting input volume.
- Output is Bridge Tied meaning the output pins connect directly to the speaker pins, no connection to ground
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 3.54 x 2.36 inches | Weight: 0.04 pounds
See On Amazon #4
Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H (3421)
Asin: B06XNL2GBW | Model: 3421 | PartNumber: 3421 | Ean: 0717520031291, 0604776613404, 7442870792389 | UPC: 717520031291, 604776613404
Good For Just About All General Audio Recording/Detection.
Purely Digital, No Analog Conversion Required!.
Low Cost Mems Mic With A Range Of About 50Hz - 15Khz.
Features
- Smaller and thinner than 'classic' electret microphones
- Low cost MEMS mic with a range of about 50Hz - 15KHz
- Good for just about all general audio recording/detection
- Purely digital, No analog conversion required!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 Inches
See On Amazon #5
Weewooday 10 Pieces Electret Microphone Amplifier Adjustable MAX4466 Module Microphone Preamplifier Blue Breakout Board Compatible with Arduino
Asin: B08TTM371D | Model: Weewooday-Size Name-P057 | PartNumber: Weewooday-Size Name-P057
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Power Supply Noise Rejection Function: The Amplifier Has Good Power Supply Noise Rejection.
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100 Thousands Of Ohm Meter) Rail-To-Rail Output; Quiescent Power Supply Current: Less Than 24 Microamp; Gain Bandwidth: 600Khz.
Features
- Application: the MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100 thousands of ohm meter) rail-to-rail output; Quiescent power supply current: less than 24 microamp; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- Power supply noise rejection function: the amplifier has good power supply noise rejection
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #6
HiLetgo 2pcs Electret Microphone Amplifier MAX4466 Module Adjustable Gain Blue Breakout Board for Arduino
Asin: B07DRGF8C2 | Model: 3-01-1491-2pcs | PartNumber: 3-01-1491-2pcs
For The Best Performance, Use The "Quietest" Supply Available (On An For Arduino, This Would Be The 3.3V Supply).
This Breakout Board Is Best Used For Projects Such As Voice Changers, Audio Recordingmpling, And Audio-Reactive Projects That Use Fft.
The Amplifier Has Excellent Power Supply Noise Rejection.
Using The Max4466, An Op-Amp Specifically Designed For Amplifier.
Features
- The board comes with a 20-20KHz electret microphone soldered on
- Using the MAX4466, an op-amp specifically designed for amplifier
- For the best performance, use the quietest supply available (on an for Arduino, this would be the 3.3V supply)
- The amplifier has excellent power supply noise rejection
- This breakout board is best used for projects such as voice changers, audio recordingmpling, and audio-reactive projects that use FFT
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
Adafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger -16MB
Asin: B00SLYA13I | Model: 2217 | PartNumber: 2217 | Ean: 0720189973482 | UPC: 720189973482
Built In Storage - Yep! You Don't Even Need An Sd Card, There's 16Mb Of Storage On The Board Itself..
Stereo Line Out - So You Can Connect Up Headphones If Desired.
11 Triggers - Connect Up To 11 Buttons Or Switches, Each One Can Trigger Audio Files To Play.
No Microcontroller Required.
Features
- Comes with a 2 x 2W stereo class D amplifier
- No microcontroller required
- Built in storage - yep! You don't even need an SD card, there's 16MB of storage on the board itself.
- 11 Triggers - Connect up to 11 buttons or switches, each one can trigger audio files to play
- Stereo line out - So you can connect up headphones if desired
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.10 x 0.90 x 2.00 inches | Weight: 0.00 Pounds
See On Amazon #8
HiLetgo 10pcs Electret Condenser Microphone 52dB MP3 Microphone Accessories 6x2.2mm
Asin: B00LZV1ERG | Model: 3-01-0439 | PartNumber: 3-01-0439 | Ean: 0702082656624 | UPC: 702082656624
Frequency Response: 50 ~ 20Khz.
Sensitivity:-48Db ~ 66Db.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
4 Pcs MAX9814 Electret Microphone Amplifier AGC Microphone Preamplifier Module Auto Gain Control
Asin: B09NRD2W7X | Model: 13-310 | PartNumber: 13-310 | Ean: 0701715510081 | UPC: 701715510081
The Electret Microphone Amplifier Max9814 Has A Fixed 12Db Gain, While The Vga Gain Automatically Adjusts From 20Db To 0Db, Depending On The Output Voltage And The Agc Threshold..
The Max9814 Is Available In The Space-Saving, 14-Pin Tdfn Package. This Device Is Specified Over The -40°C To +85°C Extended Temperature Range. Max9814: Simplified Block Diagram Max9814: Simplified Block Diagram Enlarge+.
The Frequency Response Range Of The Product Is 20Hz-20Khz, Which Is Used For Programmable Attack And Release Ratio..
The Max9814 Microphone Agc Amplifier Is A Low-Noise Front-End Amplifier, Variable Gain Amplifier (Vga), Output Amplifier, Microphone Bias Voltage Generator And Agc Control Circuit.
Features
- The MAX9814 is a high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias.
- The MAX9814 Microphone AGC Amplifier is a low-noise front-end amplifier, variable gain amplifier (VGA), output amplifier, microphone bias voltage generator and AGC control circuit
- The electret microphone amplifier max9814 has a fixed 12dB gain, while the VGA gain automatically adjusts from 20dB to 0dB, depending on the output voltage and the AGC threshold.
- The frequency response range of the product is 20Hz-20KHz, which is used for programmable attack and release ratio.
- The MAX9814 is available in the space-saving, 14-pin TDFN package. This device is specified over the -40 C to +85 C extended temperature range. MAX9814: Simplified Block Diagram MAX9814: Simplified Block Diagram Enlarge+
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #10
Adafruit Stereo 20W Class D Audio Amplifier - MAX9744
Asin: B00SK8OH30 | Model: 1752 | PartNumber: 1752 | Ean: 0701980281716 | UPC: 701980281716
20Ma Quiescent Current (Or Put Into Shutdown For 1Ua Quiescent).
Use Dc Or Ac Coupled Line-Level Input, Up To 3Vpp.Filterless Spread-Spectrum Modulation Lowers.20W Stereo Output (4&Amp;Omega;, Vdd 12V, Thd+N 10%).Low 0.04% Thd+N.Integrated Click-And-Pop Suppression.Short-Circuit And Thermal-Overload Protection.
Up To 29.5Db Max Gain.
Up To 93% Efficient (88-93% Typical).
Features
- Power From 4.5V-14V Dc Voltage
- Up To 93% Efficient (88-93% Typical)
- 20Ma Quiescent Current (Or Put Into Shutdown For 1Ua Quiescent)
- Up To 29.5Db Max Gain
- Use Dc Or Ac Coupled Line-Level Input, Up To 3Vpp.Filterless Spread-Spectrum Modulation Lowers.20W Stereo Output (4&Amp;Omega;, Vdd 12V, Thd+N 10%).Low 0.04% Thd+N.Integrated Click-And-Pop Suppression.Short-Circuit And Thermal-Overload Protection
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.08 x 1.61 x 2.13 inches | Weight: 0.02 Pounds
See On Amazon #11
Adafruit 3885 Stemma Speaker - Plug and Play Audio Amplifier
Asin: B082MNXJG5 | Model: 3885 | PartNumber: 3885
Class D Audio Amplifier.
Adjustable Volume.
Good Sound Quality For Music, Tones, Or Speech.
1W 8Ohm Speaker.
Features
- Easy to connect - Only need ground, 3 or 5V Power and an audio signal
- 1W 8Ohm speaker
- Class D Audio Amplifier
- Good sound quality for music, tones, or speech
- Adjustable volume
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.02 pounds
See On Amazon #12
Teyleten Robot MAX9814 Electret Microphone AGC Amplifier Module Auto Gain Control Release Ratio Low THD for Arduino 3pcs
Asin: B0B7SP6GYX | Model: B0B7SP6GYX_CA NARF | PartNumber: B0B7SP6GYX_CA NARF | Ean: 9331632590418
The Device Features A Low-Noise Front-End Amplifier, Variable Gain Amplifier (Vga), Output Amplifier, Microphone Bias Voltage Generator, And Agc Control Circuit.
Features
- The MAX9814 is a low-cost, high-performance microphone amplifier with automatic gain control (AGC) and low-noise microphone bias.
- The device features a low-noise front-end amplifier, variable gain amplifier (VGA), output amplifier, microphone bias voltage generator, and AGC control circuit
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 0.98 x 0.59 inches
See On Amazon #13
HiLetgo 5pcs LM386 Mini Electret Microphone Amplifier Board Microphone AMP Amplifier DC 4V-12V
Asin: B09KGWV1LT
Adjusting Potentiometer Can Drive Small Power Speakers Directly..
Working Voltage: Dc 4V-12V; Board Size: 20Mm * 20Mm.
Suitable For Electret Microphone Amplifier.
Features
- LM386 Mini Electret Microphone Amplifier Board
- Suitable for electret microphone Amplifier
- Adjusting potentiometer can drive small power speakers directly.
- Working voltage: DC 4V-12V; Board size: 20mm * 20mm
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #14
WWZMDiB 3Pcs GY-MAX4466 Sound Sensor, Electret Microphone Amplifier, Microphone Tunable Amplifier Module
Asin: B0BVH1T8FC | Ean: 0744603649708 | UPC: 744603649708
⚡【Power Supply Rejection Ratio】:112Db.
⚡【Gain Bandwidth】:600Khz.
⚡【Avol】: 125Db (Rl = 100Kω) Rail-To-Rail Output.
⚡【Static Supply Current】:24Μa.
⚡【Common Mode Rejection Ratio】:126Db.
⚡【Supply Voltage】: +2.4V To +5.5V (Can Be Directly Connected To Stm/Ardunio/Raspberry Pi Development Boards).
Features
- MAX4466 Sound Sensor The module contains ferrite on both Vcc and ground leads to minimize power supply noise. If used with an MCU, it is best to use the quietest power supply available in the 2.4V - 5.5V range. On the Arduino, this is typically a 3.3V supply.
- Supply voltage : +2.4V to +5.5V (can be directly connected to STM/ARDUNIO/Raspberry Pi development boards)
- Power supply rejection ratio 112dB
- Common mode rejection ratio 126dB
- AVOL 125dB (RL = 100k ) Rail-to-rail output
- Static supply current 24 A
- Gain bandwidth 600kHz
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #15
Acxico 3Pcs AD828 Stereo Dynamic Microphone Preamplifier Board Pickup Module DC 3.8V-15V MIC Preamp Module
Asin: B081YPCQHC | Ean: 0797806008247 | UPC: 797806008247
If You Only Used One Channel,The Other Channel Needs To Short-Circuit The Input With Gnd,To Avoid Interference With The Signal Crosstalk..
Size:2.5X1.6Cm/0.98X0.63Inch.
Working Voltage:Dc3.8V-15V.This Microphone Amplifier Board Without Power Regulator Circuit,Can Only Use The Battery Or Linear Power Supply,Can Not Use Switching Power Supply,Otherwise There Will Be Interference..
Ultra-Small Volume Dynamic Microphone Preamplifier Board,Two-Channel Design,Suitable For A Single Lithium Battery-Powered,Using Ad828 Fever Op Amp Chip,Suitable For Low Voltage Power Supply (3.8-15V).
Features
- The piezoelectric ceramic piece is sensitive to the sound wave vibration transmitted by the solid, and is not sensitive to the acoustic vibration of the gas, which can effectively reduce the environmental noise and avoid the whistling caused by the self-excitation. Can be used for guitar, erhu and other musical instruments.
- Ultra-small volume dynamic microphone preamplifier board,two-channel design,suitable for a single lithium battery-powered,using AD828 fever op amp chip,suitable for low voltage power supply (3.8-15V)
- If you only used one channel,the other channel needs to short-circuit the input with GND,To avoid interference with the signal crosstalk.
- Working voltage:DC3.8V-15V.This microphone amplifier board without power regulator circuit,can only use the battery or linear power supply,can not use switching power supply,otherwise there will be interference.
- Size:2.5x1.6cm/0.98x0.63inch
- See more on Amazon...
Brand: Acxico | Manufacturer: Acxico
See On Amazon #16
ARCELI 2pcs Electret Microphone Amplifier, GY-MAX4466 Breakout Sensor with Adjustable Gain Control for Arduino
Asin: B07MY293KD | Model: 00364 | PartNumber: 00364 | Ean: 8011678690686
3. Using Is Simple: Connect Gnd To Ground, Vcc To 2.4-5Vdc. For The Best Performance, Use The "Quietest" Supply Available (On An Arduino, This Would Be The 3.3V Supply)..
4.For Audio-Reactive Projects, We Suggest Using An Fft Driver Library Which Can Take The Audio Input And 'Translate' It Into Frequencies..
2. Add An Ear To Your Project With This Well-Designed Which Has Excellent Power Supply Noise Rejection..
Features
- 1. This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x.
- 2. Add an ear to your project with this well-designed which has excellent power supply noise rejection.
- 3. Using is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the quietest supply available (on an Arduino, this would be the 3.3V supply).
- 4.For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and 'translate' it into frequencies.
- See more on Amazon...
Brand: ARCELI | Manufacturer: ARCELI
See On Amazon #17
6 PCS MAX4466 Electret Microphone Amplifier Module Blue Board Breakout Adjustable Gain Compatible with Arduino
Asin: B09MRTRR56 | Model: SYMKFFDQ | PartNumber: SYMKFFDQ | Ean: 0723497180436 | UPC: 723497180436
Easy To Use:The Board Comes With A 20-20Khz Electret Microphone Soldered On Using The Max4466, An Op-Amp Specifically Designed For Amplifier; For The Best Performance, Use The "Quietest" Supply Available (On An For Arduino, This Would Be The 3.3V Supply);The Amplifier Has Excellent Power Supply Noise Rejection.
This Breakout Board Is Best Used For Projects Such As Voice Changers, Audio Recordingmpling, And Audio-Reactive Or Diy Projects That Use Fft.
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100Kω) Rail-To-Rail Output; Quiescent Power Supply Current: <24Μa; Gain Bandwidth: 600Khz Size:20.8Mm*13.8Mm*7.5Mm.
This Fully Assembled And Tested Board Comes With A 20-20Khz Electret Microphone Soldered On..
Features
- Application scenarios: cellular phones, repeating sound device, earphones, hearing aids, microphone preamplifiers, portable computers, voice recognition systems, etc.
- This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on.
- Easy to use:The board comes with a 20-20KHz electret microphone soldered on Using the MAX4466, an op-amp specifically designed for amplifier; for the best performance, use the quietest supply available (on an for Arduino, this would be the 3.3V supply);the amplifier has excellent power supply noise rejection
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100k ) rail-to-rail output; Quiescent power supply current: <24 A; Gain bandwidth: 600kHz Size:20.8MM*13.8MM*7.5MM
- This breakout board is best used for projects such as voice changers, audio recordingmpling, and audio-reactive or DIY projects that use FFT
- See more on Amazon...
Brand: SYUAB | Manufacturer: SYUAB
See On Amazon #18
Adafruit Industries Stereo 3.7W Class D Audio Amplifier - MAX98306
Asin: B09CF76QC6 | Model: MAX98306 | PartNumber: MAX98306 | Ean: 0697333050033 | UPC: 697333050033
Spread-Spectrum Modulation And Active Emissions Limiting.
Thermal And Short-Circuit/Over-Current Protection.
Excellent Click-And-Pop Suppression.
Passes Emi Limit Unfiltered With Up To 12 Inches (30 Cm) Of Speaker Cable.
Features
- Output Power: 3.7W at 3Ohm, 10% THD, 1.7W at 8Ohm, 10% THD, with 5V Supply
- Passes EMI limit unfiltered with up to 12 inches (30 cm) of speaker cable
- Spread-Spectrum Modulation and Active Emissions Limiting
- Excellent click-and-pop suppression
- Thermal and short-circuit/over-current protection
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.12 x 1.10 x 0.95 inches
See On Amazon #19
Onyehn 6 Pieces Electret Microphone Amplifier Module MAX4466 Adjustable Gain Blue Breakout Board for Arduino
Asin: B08LD9C7WX | Model: 5 | PartNumber: 5 | Ean: 0783926576551 | UPC: 783926576551
Application: Max4466 Microphone Breakout Is Suitable For Voice Converters, Audio Recording And Sampling, And Audio Response Projects Using Fft; On The Back, There Is A Small Trimmer Pot To Adjust The Gain; You Can Set The Gain From 25X To 125X.
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
Power Supply Noise Rejection Function: The Amplifier Has Good Power Supply Noise Rejection.
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Features
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100k ) rail-to-rail output; Quiescent power supply current: <24 A; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Application: MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Power supply noise rejection function: the amplifier has good power supply noise rejection
- Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 3.15 x 1.97 inches
See On Amazon
Looking For Something Else?
Search