4-Channel RC Servo Multiplexer
Asin: B00V3XMLEG | Model: 605074 | PartNumber: 605074 | Ean: 4060137017391
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Rc Multiplexer Measures The Width Of Incoming Rc Pulses On The Channel Labeled Sel And Compares It To A User-Configurable Threshold To Decide Whether The Master (M1-M4) Or Slave (S1-S4) Inputs To The Mux Should Show Up On The Output Channels (Out1-Out4).
If The Jumper Is Left Off, The Master Inputs Will Be In Control. If The Jumper Is Connected, The Output Channels Go Low And Stay Low For As Long As The Signal On The Sel Channel Remains Invalid. For Many Servos And Escs, A Constant Low On The Signal Line Will Turn Them Off, Which Might Be Desirable If The Control Signals Are Known To Be Bad..
By Default, The Threshold Is Approximately 1700Μs And The Slave Inputs Are Only Selected When The Pulses On Sel Are Above This Threshold. The Multiplexer Has A Learning Mode That Allows You To Change The Threshold And Activation Direction. A Yellow Indicator Led Provides Feedback About The State Of The Rc Mux.- When The Rc Signal On The Sel Channel Is Lost Or Invalid, The Optional Failmode Jumper Determines The Output Behavior..
The Multiplexer Considers The Rc Signal On The Sel Channel To Be Valid If It Has A 10-330Hz Pulse Rate And 0.5-2.5 Ms Pulse Width. The Other Inputs (S1-S4 And M1-M4) Are Unrestricted..
Features
- Dimensions: 0.97 x 0.97 Weight: 4.3g Minimum Operating Voltage: 2.5V Maximum Operating Voltage: 16V
- The multiplexer considers the RC signal on the SEL channel to be valid if it has a 10-330Hz pulse rate and 0.5-2.5 ms pulse width. The other inputs (S1-S4 and M1-M4) are unrestricted.
- The RC multiplexer measures the width of incoming RC pulses on the channel labeled SEL and compares it to a user-configurable threshold to decide whether the master (M1-M4) or slave (S1-S4) inputs to the mux should show up on the output channels (OUT1-OUT4)
- By default, the threshold is approximately 1700 s and the slave inputs are only selected when the pulses on SEL are above this threshold. The multiplexer has a learning mode that allows you to change the threshold and activation direction. A yellow indicator LED provides feedback about the state of the RC mux.- When the RC signal on the SEL channel is lost or invalid, the optional FAILMODE jumper determines the output behavior.
- If the jumper is left off, the master inputs will be in control. If the jumper is connected, the output channels go low and stay low for as long as the signal on the SEL channel remains invalid. For many servos and ESCs, a constant low on the signal line will turn them off, which might be desirable if the control signals are known to be bad.
- See more on Amazon...
Brand: Pololu | Manufacturer: Pololu
Dimensions: 0.50 x 1.00 x 1.00 inches | Weight: 0.00 pounds
See On Amazon Similar To 4Channel RC Servo Multiplexer
#1
ZOSKAY 35kg high Torque Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo arduino servo for Robotic DIY,RC car (Control Angle 270 )
Asin: B07S9XZYN2 | Model: 35 | PartNumber: 35
Copper & Aluminum / Stainless Steel & Aluminum.
Cnc Aluminium Middle Shell,Dual Ball Bearings.
High Performance Digital Standard Servo,High-Precision Metal Gears （Stainless Steel Gear）With Hard Anodizing.
High Reliability、Good Stability、Strong Adaptability, Low Noise、Small Vibration、Smooth Operation、Long Life.
Features
- DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo
- High reliability good stability strong adaptability, Low noise small vibration smooth operation long life
- Copper & Aluminum / Stainless Steel & Aluminum
- High performance digital standard servo,High-precision metal gears Stainless steel gear with hard anodizing
- CNC aluminium middle Shell,Dual ball bearings
- See more on Amazon...
Brand: ZOSKAY | Manufacturer: 35
See On Amazon #2
INJORA 7KG Servo INJS2065 with Mount and Servo Horn for TRX4M TRX4MT 1/18 RC Crawler Upgrade Parts, High Torque Waterproof
Asin: B0CD1FTQRL | Model: INJS2065-4MBK | PartNumber: INJS2065-4MBK
[Stainless Steel Gears] To Ensure Durability And Smooth Operation And Maintain A Low Noise Level,We Have Incorporated Stainless Steel Gears,Offering Exceptional Wear Resistance And Reliability..
[Note] The Servo Is Fit For Trx4m Defender, Bronco, K10 High Trai, F150 And Trx4mt. Not Compatible With The Original Trx4m Servo Mount And Servo Horn..
[Perfect Combination] This Servo Is Equipped With Metal Mount And Servo Horn, Replaces The Original Plastic Accessories..
[Ip66 Waterproof] To Prevent Water And Dust From Entering And Protecting Internal Components, Ensuring Stable Operation, The Injs2065 Servo Adopts An Ip66-Rated Waterproof Design.
Features
- [Brand Product] The INJS2065 servo features high voltage and digital control technology, providing outstanding performance and precision
- [IP66 Waterproof] to prevent water and dust from entering and protecting internal components, ensuring stable operation, the INJS2065 servo adopts an IP66-rated waterproof design
- [Stainless Steel Gears] To ensure durability and smooth operation and maintain a low noise level,we have incorporated stainless steel gears,offering exceptional wear resistance and reliability.
- [Perfect Combination] This servo is equipped with metal mount and servo horn, replaces the original plastic accessories.
- [Note] The servo is fit for TRX4M Defender, Bronco, K10 High Trai, F150 and TRX4MT. Not compatible with the original TRX4M servo mount and servo horn.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 2.76 x 3.94 x 0.79 inches | Weight: 0.12 Pounds
See On Amazon #3
4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat
Asin: B07MLR1498 | Model: 4 X SG90 Servo | PartNumber: 4 X SG90 Servo | Ean: 0608603912258 | UPC: 608603912258
Operating Voltage: 4.8-6V..
Application: Used For Fixed-Wing, Helicopter, Kt, Glider, Small Robot, Robotic Arm And Other Models..
Small Size And Light Weight..
Operating Speed: 0.1Second/ 60Degree ( 4.8V No Load)..
Features
- Beffkkip High quality and high cost performance.
- Operating speed: 0.1second/ 60degree ( 4.8V no load).
- Operating voltage: 4.8-6V.
- Small size and light weight.
- Application: Used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
- See more on Amazon...
Brand: Beffkkip | Manufacturer: Deegoo-FPV
See On Amazon #4
9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)
Asin: B09G9XN99K | Model: Eccliy | PartNumber: Eccliy
Extensive Usages: These Jst Male To Female Are Compatible With Futaba And Jr Servo, Plane And Helicopter Servo Connection Or Receiver Connection, Also Nice For Remote Control Car, Rc Car And More.
Useful Function: The Servo Extension Wire Is Suitable For Jumping From Board To Board, Or Can Be Applied To Control Panel Cable Remote, Which Is Male To Female.
Well Made: Jst Connector Is Made Of Quality Pvc Material, With Good Insulation And Flame Retardant; The Interior Is Made Of Tinned Copper, Which Has A Good Transmission And Low Resistance.
Appropriate Sizes: The Servo Extension Cord Measures Approx. 15 Cm/ 5.9 Inches In Length, Universal Size For Your Use, The Color Is White, Black And Red.
Features
- Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness; Abundant quantity and diverse styles that can meet your various needs
- Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red
- Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more
- Well made: JST connector is made of quality PVC material, with good insulation and flame retardant; The interior is made of tinned copper, which has a good transmission and low resistance
- Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote, which is male to female
- See more on Amazon...
Brand: Eccliy | Manufacturer: Eccliy
See On Amazon #5
5 Pcs JR/Futaba Style Servo 1 to 2 Y Harness Leads Splitter Cable Male to Female Extension Lead Wire for RC Models Airplane 7cm
Asin: B07PHDYZXN | Model: 890 | PartNumber: 890 | Ean: 0053554158369 | UPC: 053554158369
10Cm Lenght..
Work With Rc Cars, Planes, Helicopters, & Drones. It Can Be Used To Control 2 Servos At The Same Time..
Servo Plug Type: Futaba Compatible With Jr / Spektrum / Hitec.
Y Servo Leads Are Durable, Soft And Light.
Features
- Includes 5 pieces of cables.
- Y Servo Leads are durable, soft and light
- 10cm lenght.
- Servo Plug Type: Futaba compatible with JR / Spektrum / Hitec
- Work with RC Cars, Planes, Helicopters, & Drones. It can be used to control 2 servos at the same time.
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
See On Amazon #6
ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY, DS3218MG,Control Angle 270 Red
Asin: B076CNKQX4 | Model: DS3218 | PartNumber: DS3218 | Ean: 0601263451471 | UPC: 601263451471
▶High Quality - Equipped With Strong Copper & Aluminum Gears,Cnc Aluminium Middle Shell.
▶Dimensions - 1.58X0.79X1.60Inch (40X20x40.5Mm);Weight: 60G (2.12Oz) Only.
▶High Rotation - Well-Controlled, 270 Degree Rotation. 360 Degree Rotation When Power-Off, Perfect For Robot Joint Activities.
▶Large Torque - Maximum Torque Is Up To 21.5 Kg/Cm (298.5 Oz/In)@6.8V.
Features
- Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof
- Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V
- High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell
- High Rotation - well-controlled, 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities
- Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm);Weight: 60g (2.12oz) only
- See more on Amazon...
Brand: ANNIMOS | Manufacturer: DS SERVO
Dimensions: 0.79 x 1.57 x 1.59 inches | Weight: 0.13 Pounds
See On Amazon #7
BETU 2Pack 25KG High Torque RC Servo Waterproof servo Compatible with 1/6 1/8, 1/10, 1/12 RC Car, Full Metal Gear Steering Servo with 25T Servo Horn 270
Asin: B08739MGPL | Model: YLK2020414 | PartNumber: YLK2020414 | Ean: 0778107381871 | UPC: 778107381871
The Steering Servo's Dimensions:1.57 X 0.78 X 1.59 Inch(40 X 20 X 40.5 Mm); Weight:2.64Oz (75G)..
Great Digital Servo For People Who Are Interested In Developing Software For Robot Parts, Such As Mechanical Arm, Quadcopter Drone And Other Remote Control Equipment..
Waterproof Servo, Full Metal Gear, Less Noise, Light Weight, Running Degree 270°.
Servo Equipped With Strong Aluminum Gear, Iron Core Motor, Cnc Aluminum Middle Shell..
Features
- 2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.
- Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.
- The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).
- Waterproof servo, Full metal gear, Less noise, light weight, Running degree 270
- Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment.
- See more on Amazon...
Brand: BETU | Manufacturer: DSSERVO
Dimensions: 1.59 x 1.57 x 0.79 Inches
See On Amazon #8
Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control
Asin: B07Q6JGWNV | Model: 15714-1 | PartNumber: 15714-1 | Ean: 0701715541276 | UPC: 701715541276
Sg90 Servo Motor Compatible With The Project Like Robot Arm/ Robot Hand/ Control The Servo With Potentiometer/ Multi Servo Control..
Sg90 9G Micro Servo Motor For Remote Control Helicopters, Micro Robot, Robot Arm And Boats..
The Sg90 Has 3 Wire Interfaces In Which The Connections Should Be Made As Follows: Red Wire-5V, Brown Wire-Ground, Yellow Wire-Digital Pin 9..
Mini Servo Sg90 Is Tiny And Lightweight With High Output Power..
Features
- 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.
- Mini servo SG90 is tiny and lightweight with high output power.
- SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control.
- The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #9
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable, Mini Servos for Arduino Project (10)
Asin: B07L2SF3R4
Stall Torque (4.8V): 17.5Oz /In (1Kg/Cm). Dead Band Setting: 5 Ms.
Please Note: The Starting Current Of The Motor Should Be Greater Than 1A. Comes With 1 Year Warranty And Lifetime Technical Support.
Amplifier Type: Analog Controller. Operating Voltage: 4.8V～6.0V.
Interface Type: Compatible With Jr & Futaba Interface. Running Speed (At No Load): 0.09 ± 0.01 Sec/60°(4.8V ) 0.08 ± 0.01 Sec/60°(6V). Running Angle: 180 Degree.
Features
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 0.01 sec/60 (4.8V ) 0.08 0.01 sec/60 (6V). Running angle: 180 degree
- Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 5 ms
- Amplifier Type: Analog controller. Operating Voltage: 4.8V 6.0V
- Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support
- See more on Amazon...
Brand: Smraza | Manufacturer: Smraza
Dimensions: 0.10 x 0.98 x 1.60 inches | Weight: 0.35 pounds
See On Amazon #10
Miuzei 20KG Servo Motor High Torque RC Servo Metal Gear Waterproof for R/C Model DIY Car Robot, DS3218, Control Angle 270
Asin: B07HNTKSZT | Model: 20kg servo | PartNumber: 20kg servo | Ean: 0674862282630 | UPC: 674862282630
▶High Performance: High Quality Aluminum Gear Equipped With Double Ball Bearing, Less Noise, More Stable Torque. After The Upgrade Of Rc Servo, Two Functions Are Added, Which Can Be Automatically Protected With Anti-Burning And Rotor Blocking Protection; 5S Overload Protection, 70 ℃ Overheat Protection.
▶Application Fields: Suitable For Airboats, 1:8 / 1:10 Rc Cars, Robots, Intelligent Diy, Also Rigid Wings, Helicopters, And Other Rc Models..
▶Large Torque: It Reacts Quickly And The Maximum Torque Is Up To 22.8Kg·Cm (316.63Oz·In) At 6.8V..
▶Control System: Change Of Pulse Width. Pulse Range 500Usec ~ 2500Usec For 0° ~ 270° (90°--1166Usec, 180°--1833Usec)..
Features
- 270 Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.
- Control System: change of pulse width. Pulse range 500usec ~ 2500usec for 0 ~ 270 (90 --1166usec, 180 --1833usec).
- High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 overheat protection
- Large Torque: it reacts quickly and the maximum torque is up to 22.8kg cm (316.63oz in) at 6.8V.
- Application Fields: suitable for airboats, 1:8 / 1:10 rc cars, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
See On Amazon #11
HiLetgo 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
Asin: B07BRS249H | Model: 3-01-1070-2pcs | PartNumber: 3-01-1070-2pcs
Voltage: Dc5-10V Power Supply.
All Pwm Output Lines Have A 220 Ohm Series Resistor Protection And Can Easily Drive Led..
The Pca9685 Chip Is Wrapped In The Center Of The Board.
16-Way Steering Gear Control.
Features
- Communication Interface: IIC
- 16-way steering gear control
- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #12
Miuzei MG90S 9G Micro Servo Motor Metal Geared Motor Kit for RC Car Robot Helicopter, Mini Servos for Arduino Project (10)
Asin: B0BWJ26PX2 | Model: MG90S Servo | PartNumber: MG90S Servo
Operating Voltage 4.8V~ 6V. Operating Temperature: 0°C ~ +55°C. Dead Zone Width：5 Microseconds.
Wide Applications: Tiny And Lightweight With High Output, This Mini Small Micro Servo Is Perfect For Rc Airplanes, Helicopters, Quadcopters,Boat, Car, Electronics Diy Or Robots..
Metal Gear: Aluminum Metal Teeth, Coreless Motor, Double Ball Bearin. Metal Gear With Less Noise For Added Strength And Durability..
Stall Torque: 2.0Kg/Cm(4.8V). Operating Speed: 0.11 Seconds/60 Degrees (4.8V)..
Features
- MG90S Micro Servo Motor, updated SG90 serve motor.
- Stall Torque: 2.0kg/cm(4.8V). Operating Speed: 0.11 seconds/60 degrees (4.8V).
- Operating Voltage 4.8V~ 6V. Operating Temperature: 0 C ~ +55 C. Dead Zone Width 5 Microseconds
- Metal Gear: Aluminum metal teeth, coreless motor, double ball bearin. Metal Gear with less noise for added strength and durability.
- Wide Applications: Tiny and lightweight with high output, this mini small micro servo is perfect for RC airplanes, helicopters, quadcopters,boat, car, electronics DIY or robots.
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
Dimensions: 0.90 x 0.88 x 0.49 Inches | Weight: 0.02 pounds
See On Amazon #13
Deegoo [4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot
Asin: B07MFK266B | Model: 4Pcs MG996R | PartNumber: 4Pcs MG996R
Power Supply: Through External Adapter. Stable And Shock Proof. Coreless Motor , Metal Gear ..
Universally Applicable: Micro Servo Motor For 1:10 Rc Car Robot Helicopter Servo Remote Controlled Aircraft And Suitable For Most Diy Projects..
Torque At 6V 12Kg/Cm, 7.2V 13Kg/Cm.(Recommended Voltage: 5V, Current Usage: 3A ). Positioning Speed At 4.8V Without Load 0.17S / 60 Degrees.
The Mg996r Model Compliant With Most Standard Receiver Connector,For Futaba, Hitec, Sanwa, Gws Etc..
Features
- This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)
- The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc.
- Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear .
- Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees
- Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects.
- See more on Amazon...
Brand: Deegoo-FPV | Manufacturer: Deegoo
Dimensions: 1.38 x 2.20 x 1.93 inches | Weight: 0.49 pounds
See On Amazon #14
INJORA Coreless High Torque Micro Servo with Mount and Servo Horn for TRX4M TRX4MT 1/18 RC Crawler Upgrade Parts(Black)
Asin: B0BTBR2PDC | Model: INJS11-4MBK | PartNumber: INJS11-4MBK
【Perfect Combination】This Servo Is Equipped With Metal Mount And Servo Horn, Replaces The Original Plastic Accessories..
【Note】Not Compatible With The Original Trx4m Servo Mount And Servo Horn..
【Application Scope】Water Resistant With O-Ring Seal, Perfect For Trx4m Defender, Bronco, K10 High Trail, F150, Trx4mt 1/18 Rc Crawler Upgrade..
【Excellent Performance】 High Precise Metal Gear, With Better Accuracy And Longer Service Life..
Features
- Brand Product INJORA coreless metal gear high torque digital micro servo, high sensitivity, stable and low-noise.
- Excellent Performance High precise metal gear, with better accuracy and longer service life.
- Perfect Combination This servo is equipped with metal mount and servo horn, replaces the original plastic accessories.
- Application Scope Water Resistant with O-ring seal, perfect for TRX4M Defender, Bronco, K10 High Trail, F150, TRX4MT 1/18 RC Crawler Upgrade.
- Note Not compatible with the original TRX4M servo mount and servo horn.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Weight: 0.10 pounds
See On Amazon #15
INJORA RC Digital Servo 14kg Low Profile Servo Metal Digital Core High Torque Servo Motor for 1/10 1/12 RC Vehicles On-Road Touring Drift Car Helicopter Model
Asin: B09CDCC3ZX | Model: INJS014 | PartNumber: INJS014
【High Torque Fast Speed】The Digital Servo Provides An Impressive 11.2Kg Torque And 0.10" Transfer Speed At 4.8V, When You Increase The Voltage To 6.0V, The Specification Increases To 14Kg And 0.08" Transfer Speed!.
【Wide Applicability】Exquisite Upgrade Parts Is Not Only Suit For On-Road Car, Fixed-Wing Airplane , But Perfect For Rc Robots, Touring Drift Car, Rc Helicopter Model And So On. Note: This Servo Cann't Be Used As Dig/Shift Servo For Rc Crawler Car..
【High Performance】 Stable High Performance Digital Standard Servo, High Precision And Low Noise, A Great Replacement For The Old Or Damaged Rc Part..
【Low Profile Case】Low Profile Case Shape Saves Space And Weight. The Full Aluminum Case Design Not Only Looks Good But Also Allows For Cooler And Smoother Operating Temps..
Features
- Premium Quality Made of high quality material, full metal gears and dual ball bearings, high sensitivity, stable and low-noise.
- Low profile Case Low profile case shape saves space and weight. The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.
- High Torque Fast Speed The digital servo provides an impressive 11.2kg torque and 0.10 transfer speed at 4.8V, when you increase the voltage to 6.0V, the specification increases to 14KG and 0.08 transfer speed!
- High performance Stable high performance digital standard servo, high precision and low noise, a great replacement for the old or damaged RC part.
- Wide Applicability Exquisite upgrade parts is not only suit for on-road car, Fixed-Wing airplane , but perfect for RC Robots, Touring Drift Car, RC Helicopter Model and so on. NOTE: This servo cann't be used as dig/shift servo for RC Crawler Car.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #16
4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter
Asin: B07NQJ1VZ2 | Model: 4Pcs MG995 Metal Gear Servo | PartNumber: 4Pcs MG995 Metal Gear Servo
Torque At 6V 12Kg/Cm, 7.2V 13Kg/Cm. Positioning Speed At 4.8V Without Load 0.17S / 60 Degrees;6.0V Without Load 0.13S / 60 Degrees..
This Servo Offers A Full Range Of 180° With Metal Gears. Application:Rc Robot, Airplane Control, Robot Arm And Boats. Fit For All Kind Of R/C Toys And Arduino Experiments..
Connector Wire Length 300Mm. Stable And Shock Proof Double Coreless Motor, Metal Gear, Ball Bearing Design,Through External Adapter..
This High-Speed Standard Servo Motor Can Rotate 180 Degrees (90 In Each Direction)..
Features
- Good performance digital standard Deegoo-FPV servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
- This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees.
- Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter.
- This servo offers a full range of 180 with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments.
- See more on Amazon...
Brand: Deegoo-FPV | Manufacturer: Deegoo-FPV
Dimensions: 1.38 x 2.20 x 1.93 inches | Weight: 0.60 pounds
See On Amazon #17
ZOSKAY Servo High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars(Control Angle 180)
Asin: B07GLMDJQ7 | Model: AY | PartNumber: AY
High- Metal Gear With Hard Anodizing For Better Accuracy Cnc Aluminium Middle Shell Enhances Heat Dissipation And Longer Service Life.
Standard Servo Size:40 X 20 X 40.5 Mm ( 1.58 X 0.79 X 1.60 In) 1/8 1/10 Scale Car.
High Quality - Equipped With Strong Copper & Aluminum Gears,Cnc Aluminium Middle Shell，Made Of First-Grade Material.
Digital Servo Features Hv High Torque, Metal Gear, Fast Heat Dissipation, Sensitivity And Responsiveness. With High Quality And Performance.
Features
- 25KG servo - maximum torque can up to 25kg.cm (6.8V)
- Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance
- High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life
- High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell made of first-grade material
- Standard servo size:40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in) 1/8 1/10 scale car
- See more on Amazon...
Brand: ZOSKAY | Manufacturer: AY
See On Amazon #18
Sg90 9g Micro Servo Motor, Miuzei Mini Servos Motor Kit Metal Gear 180 Degree Servo for Rc Car Airplane Plane Arduino 10 Pack
Asin: B072V529YD | Model: servo motors | PartNumber: servo motors | Ean: 0602430670893 | UPC: 602430670893
Micro Servo Motor - Stall Torque (4.8V): 17.5Oz /In (1Kg/Cm). Dead Band Width: 7Usec. Operating Voltage: 4.8V～6.0V..
Note - Starting Current Of The Analog Servo Motor Should Be Over 1A And Servo Sg90 Are Analog Servos Need To Continuously Provide A Pmw Signal, Then It Will Be Work Normally..
Application Fields -Servos Used For Fixed-Wing, Helicopter, Kt, Glider, Small Robot, Robotic Arm And Other Models..
Mini Servo - Small Servo Motor Compatible With Jr & Futaba Interface. Micro Servo Running Speed (At No Load) : 0.09±0.01 Sec/60° (4.8V) 0.08 ± 0.01 Sec/60°(6V). Running Angle: 180 Degree..
Features
- SG90 9G Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
- Mini Servo - small servo motor compatible with JR & Futaba interface. Micro servo running speed (at no load) : 0.09 0.01 sec/60 (4.8V) 0.08 0.01 sec/60 (6V). Running angle: 180 degree.
- Micro Servo Motor - Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band width: 7usec. Operating Voltage: 4.8V 6.0V.
- Application Fields -Servos used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
- Note - Starting current of the analog servo motor should be over 1A and servo sg90 are analog servos need to continuously provide a PMW signal, then it will be work normally.
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
Weight: 3.31 pounds
See On Amazon #19
INJORA 7KG 2065 Digital Servo Waterproof High Voltage Sub-Micro Shift Servo for TRX4 TRX6 SCX10 III 1/10 RC Crawler Car,1PCS
Asin: B0BLBMVYCW
【High Waterproofness】Ip66 Waterproof Design, Maintain Good Water Tightness In Wet Conditions..
【Note】If You Want To Use It In Trx4m, You Need To Remove/Modify Part Of The Stock Servo Mount. Does Not Fit The Injora Trx4 Trx6 25T Adjustable Damping Servo Arm..
【Exquisite Workmanship】Stainless Steel Gears And Lower Noise Provide Better Stability..
【New Upgrade】This Sub-Micro Servo Is An Excellent Choice For The Diff Lock Servo In The Trx-4 Trx-6 And A Dig And Shift Servo For Scx10 Iii..
Features
- Brand Guarantee The INJORA 7KG 2065 Digital Micro Servo is an affordable, high-voltage "mighty micro" upgrade. Suit for TRX4 TRX6 SCX10 III 1/10 RC Crawler Car.
- New Upgrade This sub-micro servo is an excellent choice for the diff lock servo in the TRX-4 TRX-6 and a dig and shift servo for SCX10 III.
- High waterproofness IP66 Waterproof design, maintain good water tightness in wet conditions.
- Exquisite Workmanship Stainless steel gears and lower noise provide better stability.
- Note If you want to use it in TRX4M, you need to remove/modify part of the stock servo mount. Does not fit the INJORA TRX4 TRX6 25T Adjustable Damping Servo Arm.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #20
Traxxas 1844 Large Servo Saver
Asin: B0006N6J92 | Model: TRA1844 | PartNumber: TRA1844
Ean: 0885417140033, 0020334184405, 0746550847930, 0885826798405, 0885165295276, 6933653414648, 0885790754698
UPC: 020334184405, 746550847930, 885826798405, 885790754698, 885417140033, 885165295276
Replaces Worn Or Damaged Parts.
Protects Servo From Impact.
Brand: Traxxas | Manufacturer: Traxxas
Dimensions: 4.75 x 3.25 x 0.38 inches | Weight: 0.00 Pounds
Warranty: No Warranty
See On Amazon
Looking For Something Else?
Search