Iot Relay - Enclosed High-Power Power Relay for Arduino, Raspberry Pi, PIC or WiFi, Relay Shield
Asin: B00WV7GMA2 | Model: IoT | PartNumber: IoT | Ean: 5269692770683, 0705020645490 | UPC: 705020645490
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Wires To Your Arduino, Raspberry Pi, Pic, Or Other Micro.
Includes Surge Supression, Debounce, Safety Breaker.
Takes The Place Of A Relay Board. Fully Assembled And Ready To Use..
One Circuit, 4 Outlets, 2X Nc, 2X No.
Features
- Safe, Reliable Power Control
- One circuit, 4 outlets, 2x NC, 2x NO
- Wires to your Arduino, Raspberry Pi, PIC, or other micro
- Takes the place of a relay board. Fully assembled and ready to use.
- Includes surge supression, debounce, safety breaker
- See more on Amazon...
Brand: DLI 705020645490 | Manufacturer: Digital Loggers
See On Amazon Similar To Iot Relay Enclosed HighPower Power
#1
AC100V-250V 30A High Power 2-Channel Relay High Current DC5V High-Low Level Trigger Switch Module for Arduino
Asin: B077W1NVLM | Model: Walfrontbg8atmgd7x | PartNumber: Walfrontbg8atmgd7x | Ean: 0663862470437 | UPC: 663862470437
Easy To Use, Designed With Screw Terminals For Convenient Connection.
Four Mounting Holes Are Great For Installation.
High Or Low Level Trigger Can Be Selected By Jumper.
Large Load Capacity, The Relay Can Connect To Maximum 30A, 250V Loads.
Features
- This is a high-low level trigger 2-channel relay module that can control two loads
- Large load capacity, the relay can connect to maximum 30A, 250V loads
- Easy to use, designed with screw terminals for convenient connection
- High or low level trigger can be selected by jumper
- Four mounting holes are great for installation
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.22 pounds
See On Amazon #2
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
HiLetgo 12V 1 Channel Relay Module with Optocoupler Isolation Support High or Low Level Trigger
Asin: B00LW15D1M | Model: 3-01-0341 | PartNumber: 3-01-0341 | Ean: 0702082655955 | UPC: 702082655955
Module Can Be Set By Jumper High Or Low Trigger.
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move.
Using Optocoupler Chip Isolation, Strong Drive Capability, Stable Performance; Trigger Current 5Ma.
Features
- Module uses genuine high quality relay, normally open interface maximum load: AC 250V / 10A, DC 30V / 10A
- Using optocoupler chip isolation, strong drive capability, stable performance; trigger current 5mA
- Module can be set by jumper high or low trigger
- Fault-tolerant design, even if the control line is broken, the relay will not move
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
OONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 12V Control Voltage
Asin: B089Q6KLPQ | Model: F-1022 Series | PartNumber: F-1022 Series | Ean: 6954525591007
Compact Plastic Case And Wires Connects For Easy Mount. Led Indication For Relay Action..
This Is A Simple And Practical Passive Relay Module, Which Is Very Convenient To Use. It Can Support Both Normally Open And Normally Close. Two Screw Mounting Holes Are Convenient For You To Fix It On The Wall Or Wooden Board. Of Course, You Can Also Choose Not To Lock The Screw..
Output Switch Dpst 1No 1Nc(Double Pole Single Throw, 1X Normally Open And 1X Normally Close ), Rated Current 8A/250Vac Or 8A/30Vdc (One Switch)..
Features
- Input control signal: Voltage AC or DC 12V, Current 33mA.
- Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
- Compact plastic case and wires connects for easy mount. LED indication for relay action.
- This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw.
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon #5
HiLetgo 2pcs DC 12V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level Trigger Module Triggered by DC 12V
Asin: B00LW15F42 | Model: 3-01-0342 | PartNumber: 3-01-0342 | Ean: 0702082655962 | UPC: 702082655962
The Module Can Be High Or Low By A Jumper Setting Trigger;.
Fault-Tolerant Design , Even If The Control Line Is Broken , The Relay Will Not Operate ;.
Interface Design Humane, All Interfaces Can Be Connected Directly Via Terminal Wiring Leads , Very Convenient ;.
With Patch Optical Isolation, Strong Drive Ability And Stable Performance;.
Features
- Can set high or low level trigger with jumper, to meet the demand of more trigger applications;
- With patch optical isolation, strong drive ability and stable performance;
- The module can be high or low by a jumper setting trigger;
- Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient ;
- Fault-tolerant design , even if the control line is broken , the relay will not operate ;
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.72 x 2.00 x 1.60 inches | Weight: 0.11 pounds
See On Amazon #6
SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board Compatible with Arduino R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
Asin: B00E0NTPP4 | Model: 8541582329 | PartNumber: 8541582329 | Ean: 0520141421293 | UPC: 520141421293
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino ,Raspberry Pi, 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Size: 50.5Mm(L) X 38.5Mm(W) X 18.5Mm(H)(1.99Inch X 1.54Inch X 0.73Inch).
Indication Led's For Relay Output Status.
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A.
Features
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED's for Relay output status
- Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch)
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 2.70 x 2.50 inches | Weight: 0.06 pounds
See On Amazon #7
Electromagnetic Power Relay, 8-Pin 10 AMP 110V/120V AC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - MY2NJ [Applicable for DIN Rail System]
Asin: B0BNCZCFGY
Coil Voltage: 110V/120V Ac; Contact Capacity: 10A 240Vac.
Led Signal Lamp : It Can Judge The Ac Or Dc Coil, And Judge Whether The Coil Is Energized.
Red Mechanical Indicatoe:It Can Intuitively Judge Whether The Relay Is Attracted.
Product Name: Electromagnetic Power Relay; Model: Yj2n-Ly Type: Dpdt; Number Of Terminals: 8.
Features
- Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc
- Product Name: Electromagnetic Power Relay; Model: YJ2N-LY Type: DPDT; number of terminals: 8
- Coil voltage: 110V/120V AC; Contact capacity: 10A 240VAC
- Red mechanical indicatoe:It can intuitively judge whether the relay is attracted
- LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized
- See more on Amazon...
Brand: VAMRONE | Manufacturer: YYUAN
Dimensions: 3.00 x 0.90 x 2.50 inches
See On Amazon #8
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PP8HXVD | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708922
Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon #9
MHCOZY 4 Channel Smart WiFi RF Bluetooth Wireless Dry Contact Relay Switch Module,Phone app Remote Control,Work with Alexa Google Home (tuya 4ch 12v)
Asin: B09M6HTDVS
Schedule And Share With Family,You Can Set Countdown Sunrise Repeat Schedule,And Easy Share Phone Remote To With Your Family..
Voice Control,One Key To Link With Alexa Google Assistant Smartthings Siri,Use Your Voice Command To Control Your Garage Light When Busy.
Simple Din Rail 24V Relay, With Abs Shell,Can Be Fixed To Electronic Box.
Widely Usage,Mhcozy 4 Channel Wifi Relay,With 3 Working Mode,Self-Lock Momentary And Interlock Switch,You Can Set Mode By Channel,Adjust Momentary Time From 2 Second To 1 Minute In Smart Life App.Diy Wifi Garage Door Opener,Automate Chicken Hoop Door Shutter Blind Curtain.
Features
- Bluetooth WIFI Relay,Smart life tuya app wifi remote& 433Mhz RF&Bluetooth remote 4 Channel Smart Relay.Easy to configure to Smart life app,working voltage is DC 5V or DC 7-32 V.Once configured with Smart life app,you can use bluetooth remote or 433mhz RF control when lose WIFI connection,support fixed code 433Mhz RF
- Widely Usage,MHCOZY 4 channel WIFI Relay,with 3 working mode,self-lock Momentary and Interlock Switch,you can set mode by channel,adjust momentary time from 2 second to 1 minute in Smart life app.DIY WIFI Garage Door Opener,Automate chicken hoop door shutter blind curtain
- Schedule and Share with Family,you can set countdown sunrise Repeat schedule,and easy share phone remote to with your family.
- Simple DIN Rail 24V Relay, with ABS Shell,can be fixed to electronic box
- Voice control,One key to link with Alexa Google assistant Smartthings Siri,use your voice command to control your Garage light when busy
- See more on Amazon...
Brand: MHCOZY | Manufacturer: Mic technology co.,ltd
Dimensions: 1.18 x 3.15 x 3.15 inches
See On Amazon #10
HiLetgo 12V 4 Channel Relay Module with OPTO-Isolated Support High and Low Level Trigger
Asin: B00LW2GM84 | Model: 3-01-0371 | PartNumber: 3-01-0371 | Ean: 0702082656167 | UPC: 702082656167
High And Low Level Trigger.
Using Smd Optocoupler Isolation.
Features
- HiLetgo 12V 4 Channel Relay Module
- Using SMD OPTOCOUPLER isolation
- High and Low Level Trigger
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #11
5v Relay Module 1 Channel Relay Board for Raspberry Pi with Opto-Isolated High or Low Level Trigger 5v 1 Channel Relay Switch for Arduino
Asin: B09G6H7JDT | Ean: 0734914033952 | UPC: 734914033952
【Adopted Smd Optocoupler Isolation& Jumper Set】- The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.The Module Has A Jumper So You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
【Humanization Design On Interfaces】- All Interfaces Can Be Directly Wired Out Through The Terminals.Fault-Tolerant Design;Fault-Tolerant Design,Even If The Control Line Is Broken, The Relay Will Not Operate..
【Wide Application】-These 5V Relay Board Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
【Main Specification】- Peak Load Of No Connector: Ac125~250V/10A, Dc28~30V/10A; Trigger Current: 5Ma;The Module Operating Voltage:12V; 4Pcs * 3.1 Mm Fixed Bolt Hole..
Features
- 5V 1 Channel Relay Module - This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller.
- Main Specification - Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A; Trigger Current: 5mA;The Module Operating Voltage:12V; 4pcs * 3.1 mm Fixed Bolt Hole.
- Adopted SMD Optocoupler Isolation& jumper Set - The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- Wide Application -These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc.
- Humanization Design On Interfaces - All interfaces can be directly wired out through the terminals.Fault-tolerant design;fault-tolerant design,even if the control line is broken, the relay will not operate.
- See more on Amazon...
Brand: AZKO | Manufacturer: AZKO
Dimensions: 0.10 x 0.10 x 0.10 inches
See On Amazon #12
JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM
Asin: B00KTEN3TM | Model: 4450182 | PartNumber: 4450182 | Ean: 0520361134553 | UPC: 520361134553
Be Able To Control Various Appliances, And Other Equipments With Large Current.
Indication Led's For Relay Output Status.
Application：Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control.
5V 4-Channel Relay Interface Board, And Each One Needs 50-60Ma Driver Current.
Features
- Equiped with high-current relay, AC250V 10A ; DC30V 10A
- 5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
- Be able to control various appliances, and other equipments with large current
- Application Supports all MCU control, The industrial field, PLC control, Smart home control
- Indication LED's for Relay output status
- See more on Amazon...
Brand: JBtek | Manufacturer: JBtek
Dimensions: 0.79 x 2.56 x 1.97 inches | Weight: 0.02 Pounds
See On Amazon #13
DIYables 3pcs Relay Module for Arduino, ESP32, ESP8266, Raspberry Pi, 1 Channel, 5V, High/Low Level Trigger
Asin: B0B1ZHXXXD | Model: DIY-RELAY-3-5V-1C-LH | PartNumber: DIY-RELAY-3-5V-1C-LH
Relay With Optocoupler Isolation.
Relay With Two Led Indicators: Power (Green Led), The Relay Status (Red Led).
Relay With Terminal Blocks For Both Input And Output Interface.
Relay Supports High-Level Trigger Or Low-Level Trigger Selectable By A Jumper.
Features
- Relay supports Normally Open and Normally Closed
- Relay supports High-level Trigger or Low-Level Trigger selectable by a jumper
- Relay with Optocoupler Isolation
- Relay with Terminal Blocks for both Input and Output Interface
- Relay with two LED Indicators: power (green LED), the relay status (red LED)
- See more on Amazon...
Brand: DIYables | Manufacturer: DIYables
Dimensions: 0.73 x 1.97 x 1.02 inches
See On Amazon #14
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32
Asin: B09ZQRLD95
With Power Indicator,8-Way Road Has A Status Indicator. With A Relay Coil To Absorb The Diode Protection..
The 8 Channels Are Optically Isolated, Safe, Reliable, Anti-Interference. Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control。For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Each Relay Has Normally Open And Normally Closed Contact. Can Be Selected By Jumper Relay And Ttl Or Ground..
Features
- 5V 8-Channel Relay interface board, each one needs 70mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #15
HiLetgo 12V 8 Channel Relay Module with OPTO-Isolated High and Low Level Trigger 8 Ways Relay Switch Module for Arduino
Asin: B00LW2GA5Y | Model: 3-01-0348 | PartNumber: 3-01-0348 | Ean: 0702082656006 | UPC: 702082656006
The Module Can Be High Or Low By A Jumper Setting Trigger;.
The Power Indicator (Green), The Relay Status Indicator (Red)..
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;.
The Module Operating Voltage 12V;.
Features
- 12V 8 Channel Relay Module With OPTO-Isolated High And Low Level Trigger
- The module Operating voltage 12V;
- The module can be high or low by a jumper setting trigger;
- Fault-tolerant design, even if the control line is broken, the relay will not operate;
- The power indicator (green), the relay status indicator (red).
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.11 pounds
See On Amazon #16
Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Asin: B07WQH63FB | Model: VA-0166 | PartNumber: VA-0166 | Ean: 0793118392173 | UPC: 793118392173
【Fault-Tolerant Design】The Relay Will Not Operate Even If The Control Line Is Disconnected..
【High Compatibility】The Relay Module Can Be Controlled Directly By 5V Logic Signals From Microcontroller(8051, Avr, Pic, Dsp, Arm, Raspberry Pi, Msp430, Ttl Logic Etc).
【Universal Interface】Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
【Load Range】No(Normally Open) Maximum Load < Ac 250V/10A, < Dc 30V/10A. Trigger Current Of Opto-Isolator: 5Ma..
Features
- Control Devices The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
- Load Range NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- Fault-tolerant Design The relay will not operate even if the control line is disconnected.
- Universal Interface Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High Compatibility The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
See On Amazon #17
Hosyond 6Pack 2 Channel DC 5V Relay Module with Optocoupler Relay Board for Arduino Raspberry Pi MEGA2560
Asin: B0C2Z7QF71 | Ean: 0732214748163 | UPC: 732214748163
High Level Or Low Level Trigger. Pull In At Low Level And Release At High Level. The Status Indicator Is On When It Is Pull In, And It Is Release When It Is Released..
Widely Used In All Mcu Control, Industrial Fields, Plc Control, Smart Home Control..
The 2 Channel Relay Interface Board Can Directly Control Arduino, Avr, Pic, Arm, Plc And Other Single-Chip Microcomputers, And Can Also Control Various High-Current Electrical Appliances And Other Equipment..
The Relay Has A Standard Interface And Can Be Directly Connected To The Microcontroller, Which Is Convenient For Wiring. Package Contains 10 Male To Female Dupont Wires..
Features
- The power supply voltage of the relay module is DC5V. The maximum output load is AC250V 10A and DC30V 10A.
- The relay has a standard interface and can be directly connected to the microcontroller, which is convenient for wiring. Package contains 10 male to female DuPont wires.
- High Level or Low Level Trigger. Pull in at low level and release at high level. The status indicator is on when it is pull in, and it is release when it is released.
- The 2 channel relay interface board can directly control Arduino, AVR, PIC, ARM, PLC and other single-chip microcomputers, and can also control various high-current electrical appliances and other equipment.
- Widely used in all MCU control, industrial fields, PLC control, smart home control.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Weight: 0.41 pounds
Warranty: NO
See On Amazon #18
SainSmart 16-Channel 12V Relay Module Board for Arduino DSP AVR PIC ARM
Asin: B0057OC66U | Model: 101-70-103 | PartNumber: 101-70-103 | Ean: 0796793392285, 6952131721337 | UPC: 796793392285
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp433, Ttl Logic).
Indication Led's For Relay Output Status.
Equipped With High-Current Relay, Ac250v 10A ; Dc30v 12A.
Features
- 12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 12A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic)
- Indication LED's for Relay output status
- See more on Amazon...
First Available: 05/06/2018
Brand: SainSmart | Manufacturer: SainStore Inc.
Dimensions: 1.19 x 8.00 x 5.70 Inches | Weight: 0.55 Pounds
See On Amazon #19
UCTRONICS DC 12V Programmable Multifunction Time Delay Relay Module with Segment LEDs Display for Smart Home, Automatic Control
Asin: B07BT32T1M | Model: U6030 | PartNumber: U6030
Auto Power Saving Function, User Could Set Up On Their Own.
Paper Instructions.
All Options Setting Could Be Saved Automatically, The Content Will Not Be Lost Even Power Down.
Reverse Protection, Avoid Burning Down The Module As Connecting The Wrong Terminals.
Features
- Programmable 18 delay modes, to meet the switch control of all kinds of occasions
- Reverse protection, avoid burning down the module as connecting the wrong terminals
- Auto power saving function, user could set up on their own
- All options setting could be saved automatically, the content will not be lost even power down
- Paper instructions
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.09 pounds
See On Amazon
Looking For Something Else?
Search