BQLZR Desk Light Parts Touch Control Touch Sensor 3 Way Sensor Dimmer for Bulbs Lamp Switch 120W 3A
Asin: B00XJK4UW2 | Model: N10358 | PartNumber: N10358 | Ean: 0704256158118 | UPC: 704256158118
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Touch Control Sensor Wiring Method.
Also Can Used A Black Wire To Power The Device Not Red Then Used The Red Wire To The Bulb(S). The White Wire Should Always Go To The Neutral.
Three Gears: Low, Medium, High,.
If You Have Any Problems, Please Feel Free To Contact Us..
The Lamp Body Connected To The Yellow Wire Must Be Metal, For Example, Plastic Or Plastic Heads Cannot Be Used..
Black Lines Are Shared Zero (Which Are Connected To The Input And Output Of The Zero Line).
Due To Energy-Saving Lamps Are Not Dimmable, And So Was The Third Gear Touch Sensors Only Applies To Ordinary Light Bulbs (1A: Less 60W; 3A: 120W Or Less), Not Adapted To Energy-Saving Lamps And Led Lamps..
Features
- The red wire is connected to the input (ie plug) live wire. Toucher wiring method: The black wire is the common neutral wire (connected to the neutral wire of the input and output respectively) The white wire is connected to the output live wire of the light source (i.e. bulb) The yellow wire with the ground wire ear should be connected to the ground (that is, the lamp base Metal parts)
- Due to energy-saving lamps are not dimmable, and so was the third gear touch sensors only applies to ordinary light bulbs (1A: less 60W; 3A: 120W or less), not adapted to energy-saving lamps and LED lamps.
- Touch Control Sensor wiring method
- Black lines are shared zero (which are connected to the input and output of the zero line)
- If you have any problems, please feel free to contact us.
- The lamp body connected to the yellow wire must be metal, for example, plastic or plastic heads cannot be used.
- Also can used a black wire to power the device not red then used the red wire to the bulb(s). The white wire should always go to the neutral
- Three gears: low, medium, high,
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Dimensions: 0.43 x 1.77 x 1.26 Inches
See On Amazon Similar To BQLZR Desk Light Parts Touch
#1
Zeifun Touch Lamp Switch 2 Pack, Touch Lamp Control Module for Dimmable LED, Incandescent, Halogen Bulbs, Lamp Switch Replacement Kit, Touch Dimmer Sensor with 3 Levels Brightness and Wiring Caps
Asin: B09NRW8F61
✔【Compact Size】Low Profile Touch Control Module Can Be Compatible With Almost All Lamp Bases. Save Your Budget To Look For An New Lamp. The Touch Control Function Is Convenient For Anyone To Obtain Comfortable Brightness.
✔【Energy Efficiency】With 3 Way Dimmable Function, You Could Dim The Lights To Save Energy And Extend Bulb Life. The Light Can Be Adjusted From Dim, Medium To Bright, Reduce Eyestrain And Protect Your Eyes From Overly Bright Lights.
✔【Wide Application】Touch Lamp Control Module Can Fit Well With Various Kinds Of Bulbs In The Market, Such As Dimmable Led, Cfl, Halogen Or Incandescent Bulbs. Perfect For Tabletop Lamp, Holiday Lights And Other Mood Lighting. Note: It Only Works With Metal Base Lamps.
✔【Quick To Install】Comes With 4 Different Colored Wires And Wire Caps, Which Makes The Touch Sensor Dimmer Easy To Operate. Ideal For Any Diy Users. The Replacement Touch Sensor Would Be An Excellent Item For You To Improve The Quality Of Life.
Features
- Latest 3-way Dimmable Touch Control Tech Our touch lamp control switch adopted newest dimming chip, offering 3 level brightness (Low, Medium, High), great for nightstand use, decorative warm mood or bright reading light. Touch lamp switch will offer a smooth and quiet dimming experience. No delay, no noise, no interruption to your family
- Quick to Install Comes with 4 different colored wires and wire caps, which makes the touch sensor dimmer easy to operate. Ideal for any DIY users. The replacement touch sensor would be an excellent item for you to improve the quality of life
- Compact Size Low profile touch control module can be compatible with almost all lamp bases. Save your budget to look for an new lamp. The touch control function is convenient for anyone to obtain comfortable brightness
- Wide Application Touch lamp control module can fit well with various kinds of bulbs in the market, such as Dimmable LED, CFL, Halogen or incandescent bulbs. Perfect for tabletop lamp, holiday lights and other mood lighting. Note: it only works with metal base lamps
- Energy Efficiency With 3 way dimmable function, you could dim the lights to save energy and extend bulb life. The light can be adjusted from dim, medium to bright, reduce eyestrain and protect your eyes from overly bright lights
- See more on Amazon...
Brand: Zeifun | Manufacturer: Zeifun
Dimensions: 0.61 x 1.95 x 1.38 Inches | Weight: 0.07 pounds
See On Amazon #2
Touch Dimmer Switch 2 Pack, 3 Way Touch Control Modules, Replacement Sensor with 3 Levels Dimming Function, Desk Lamp Switch Repair Kits with Wire Caps, Fit Dimmable LED, Incandescent, Halogen Bulbs
Asin: B095P35P2Q | Model: CA-2 | PartNumber: CA-2
Simple & Quick Installation: To Save Your Anxiety And Energy To Assemble It, The Package Contains Wiring Caps And Detailed Instruction, Allowing User To Complete All Installation Steps In A Breeze. You Could Also Watch The Video On The Listing To Wire The Switch If Needed. Note: The Touch Lamp Switches Can Be Used On Metal Base Lamp Only.
Hassle-Free Warranty: We Cherish All User Experiences And Advices Of Our Customers. Your Satisfaction Is Our Top Priority. Thus, We Offer 2 Years Warranty And Money Back Guarantee For Each Of Our Products. If You Have Any Problem About The Items, Please Feel Free To Reach Us.
Universal Compatibility: These 2-Pack Dimming Touch Switches Work With Multiple Types Of Bulbs On The Market, Such As Dimmable Led (Max: 25W) Incandescent, Cfl Or Halogen (Max: 100W). You Can Choose Different Bulbs To Meet Various Needs, Perfect For Bedroom, Living Room Or Entryway.
Wide Application: Features 3 Brightness Options And Touch Function, The Replacement Touch Switch Is Handy For Anyone To Adjust Desired Lighting For Sleeping, Amusing, Reading Or Working. Just Tap Anywhere Of Metal Base Or Pole To Customize The Brightness From Low, Medium To High, Providing More Flexibility On Daily Life.
Features
- 3 Way Dimmable Touch Module: Adopted advanced dimming chips, touch control sensor will bring a smooth dimming experience. Compact profile makes it easy to assemble to lamp base, ideal to replace defective switch of bedside nightstand lamp, side table lamp, decorative lamp or accent lamp
- Wide Application: Features 3 brightness options and touch function, the replacement touch switch is handy for anyone to adjust desired lighting for sleeping, amusing, reading or working. Just tap anywhere of metal base or pole to customize the brightness from low, medium to high, providing more flexibility on daily life
- Simple & Quick Installation: To save your anxiety and energy to assemble it, the package contains wiring caps and detailed instruction, allowing user to complete all installation steps in a breeze. You could also watch the video on the listing to wire the switch if needed. Note: The touch lamp switches can be used on metal base lamp only
- Universal Compatibility: These 2-pack dimming touch switches work with multiple types of bulbs on the market, such as dimmable LED (Max: 25W) incandescent, CFL or halogen (Max: 100W). You can choose different bulbs to meet various needs, perfect for bedroom, living room or entryway
- Hassle-Free Warranty: We cherish all user experiences and advices of our customers. Your satisfaction is our top priority. Thus, we offer 2 years warranty and money back guarantee for each of our products. If you have any problem about the items, please feel free to reach us
- See more on Amazon...
Brand: Seaside village | Manufacturer: Seaside village
Dimensions: 0.63 x 5.78 x 1.18 inches
See On Amazon #3
2 Pack Touch Dimmer Switch 3 Way Touch Sensor dimmer,Touch lamp Repair kit Control Module,Touch Lamp Replacement Kit Fit Dimmable LED, Incandescent, Halogen Bulbs
Asin: B0CN96BP9L
【Safe To Use】It Is Made Of Plastic Material, Insulating And Flame Retardant, And The Copper Conductor Has Stable Performance. The Rated Voltage Is 110-230V, The Rated Current Is 3A, Safe To Use, Suitable For Bedroom, Living Room Or Entryway..
【Easy To Install】Blue And Brown Wires Are Connected To The Plug, Blue And Red Wires Are Connected To The Light Source (Blue Is Connected To Two Sets Of Wires At The Same Time), And The Black Wire Is The Touch Wire, Usually Connected To The Hardware Panel..
【No Noise】Built-In Dimming Chips, Touch Control Sensor Will Bring A Smooth Dimming Experience, Not Allowed To Dim Or Turn On The Light On The Power Cord, No Noise, Will Not Disturb Your Family's Sleep..
【3-Way Dimming】3-Way Touch Controls Light Brightness, Slightly Bright/Medium Bright/Full Bright, Which Can Be Adjusted At Will According To Actual Needs, Suitable For Sleeping, Amusing, Reading Or Working..
Features
- WIDE APPLICATION The touch control switch is widely used in table lamps, bedside nightstand lamp, side table lamp, decorative lamp or accent lamp, multiple types of bulbs, practical and convenient.
- 3-WAY DIMMING 3-way touch controls light brightness, slightly bright/medium bright/full bright, which can be adjusted at will according to actual needs, suitable for sleeping, amusing, reading or working.
- SAFE TO USE It is made of plastic material, insulating and flame retardant, and the copper conductor has stable performance. The rated voltage is 110-230V, the rated current is 3A, safe to use, suitable for bedroom, living room or entryway.
- NO NOISE Built-in dimming chips, touch control sensor will bring a smooth dimming experience, not allowed to dim or turn on the light on the power cord, no noise, will not disturb your family's sleep.
- EASY TO INSTALL Blue and brown wires are connected to the plug, blue and red wires are connected to the light source (blue is connected to two sets of wires at the same time), and the black wire is the touch wire, usually connected to the hardware panel.
- See more on Amazon...
Brand: QWLWBU | Manufacturer: QWLWBU
Dimensions: 0.24 x 4.72 x 3.15 Inches | Weight: 0.09 Pounds
See On Amazon #4
BQLZR Black DC 6-12V LED Touch Dimmer Switch XD-614 Sensor Lamp Accesories Safety Pack of 5
Asin: B072JDLBMQ | Model: BQLZRN30659 | PartNumber: BQLZRN30659
No Need To Find Where The Switch Is In Darkness, Touch The Light Body, You Can Easily Switch On Or Off And Adjust The Brightness..
Wiring Method: The Red Wire And The Black Wire Are Connected To "+ -" 6V-12V Input, And The Red Wire And The Blue Wire Are Connected To The Load.
Remember That These Switch The Negative Lead, Not The Positive As Would Be More Intuitive, So If Your Device Seems Not To Be Working Correctly It Could Be That It Is Just Wired Backwards..
How To Work:With The 12V Led Connected, Tapping Any Point Will Toggle The Unit Either On (At Previous Brightness, Unless Fully Powered Off) Or Off. A Long Press At Full Brightness Will Start Reducing The Brightness. Long Press When Dimmed Will Start Increasing Brightness.
It Is Suitable For The Led Which Has Cover Such As Glass, Alec, Plastic, Pottery..
Features
- XD-615 when you touch each part of the meatl body,it will on, release it ,it will off.
- It is suitable for the LED which has cover such as Glass, Alec, Plastic, Pottery.
- No need to find where the switch is in darkness, touch the light body, you can easily switch on or off and adjust the brightness.
- how to work:With the 12v LED connected, tapping any point will toggle the unit either on (at previous brightness, unless fully powered off) or off. A long press at full brightness will start reducing the brightness. Long press when dimmed will start increasing brightness
- Wiring method: the red wire and the black wire are connected to + - 6V-12V input, and the red wire and the blue wire are connected to the load
- Remember that these switch the negative lead, not the positive as would be more intuitive, so if your device seems not to be working correctly it could be that it is just wired backwards.
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Dimensions: 0.59 x 1.93 x 1.34 Inches | Weight: 0.22 Pounds
See On Amazon #5
BQLZR Touch Light Switch for Lamp Touch Dimmer AC 120V 50Hz/60Hz Touch Lamp Desk Light 3 Way Sensor Switch Dimmer Repair,3 Levels (Low, Medium, High, Off) Dimmer Switch
Asin: B00EQ21CHI | Model: N03416 | PartNumber: N03416 | Ean: 0700443089036 | UPC: 700443089036
① Connect The Red Wire To The Fire Wire. ②. The Black Wire Is Connected To The Neutral Wire, Which Is A Shared Neutral Wire (Both The Output And Input Neutral Wires Are Connected). ③. Connect The White Wire To The Live Wire Of The Light Bulb. ④ Connect The Yellow Wire To The Metal Part Of The Lamp, And Control The On And Off By Touching The Metal.
[Special Reminder]: Because The Energy-Saving Lamps Are Not Dimmable, The Three-Speed Touch Sensor Is Only Suitable For Ordinary Light Bulbs (Within 60W), Not Suitable For Energy-Saving Lamps And Led Lamps..
[Notes]: 1. First Of All, Consider Whether The Wiring Is Correct; 2. The Power Of The Bulb Cannot Exceed 60W; 3. After The Touch Device Is Installed, There Can Be No Dimming On The Power Cord, And Cannot Be Used At The Same Time; 4. The Yellow Wire Is Connected The Lamp Body Must Be A Conductor, Such As Metal, If It Is Loaded On Plastic Or Wood, It Cannot Be Used; 5.3 Can Not Install Energy-Saving Lamps And Led Bulbs, Only Ordinary Bulbs Can Be Installed..
3 Levels: Low, Medium, High, Then Off.Note:The Light Bulb Can Only Be Installed With Ordinary Light Bulbs, So There Will Be Three Levels Of Adjustment.
Features
- Touch lamp desk light 3 Way Sensor Switch Repair.the colour coding of the touch switch wires, which are: BLACK (neutral), RED (live), WHITE (switch) and YELLOW (lamp base)
- 3 levels: low, medium, high, then off.NOTE:The light bulb can only be installed with ordinary light bulbs, so there will be three levels of adjustment
- Connect the red wire to the fire wire. . The black wire is connected to the neutral wire, which is a shared neutral wire (both the output and input neutral wires are connected). . Connect the white wire to the live wire of the light bulb. Connect the yellow wire to the metal part of the lamp, and control the on and off by touching the metal
- [Notes]: 1. First of all, consider whether the wiring is correct; 2. The power of the bulb cannot exceed 60W; 3. After the touch device is installed, there can be no dimming on the power cord, and cannot be used at the same time; 4. The yellow wire is connected The lamp body must be a conductor, such as metal, if it is loaded on plastic or wood, it cannot be used; 5.3 can not install energy-saving lamps and LED bulbs, only ordinary bulbs can be installed.
- [Special reminder]: Because the energy-saving lamps are not dimmable, the three-speed touch sensor is only suitable for ordinary light bulbs (within 60W), not suitable for energy-saving lamps and LED lamps.
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 Pounds
See On Amazon #6
Touch Lamp Repair Kit
Asin: B0045PVAPK | Ean: 0705105350813 | UPC: 705105350813
Brand: OK Lighting | Manufacturer: OK Lighting
See On Amazon #7
BQLZR 120V/240V 50Hz/60Hz Table Desk Lamp Light 3 Way Touch Control Sensor Switch Dimmer Modulator Pack of 10
Asin: B0714NXNMW
This Sensor Switch Is Only Suitable For Normal Bulb(Less Than 60W), Not For Energy Saving Lamp Or Led Light, Cause Their Luminance Is Not Adjustable..
Suitable For Kinds Of Lamps And Lights, Easy To Install..
Features
- Three levels: low, medium, high, then off.
- Suitable for kinds of lamps and lights, easy to install.
- This sensor switch is only suitable for normal bulb(less than 60W), NOT for energy saving lamp or Led light, cause their luminance is not adjustable.
- See more on Amazon...
Brand: BQLZR | Manufacturer: BQLZR
Dimensions: 0.39 x 1.89 x 1.26 Inches | Weight: 0.22 Pounds
See On Amazon
Looking For Something Else?
Search