Hydraulic Gear Puller w. Separable Hand Pump Bearing Wheel (10 tons) (L-10F-MP)
Asin: B00XKCU3TS
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: HYDRAFORE
Weight: 45.00 pounds
See On Amazon Similar To Hydraulic Gear Puller w. Separable
#1
Thorstone 46pcs Harmonic Balancer Puller Set, Steering Wheel Flywheel Crankshaft Pulley Puller
Asin: B088CKF6PP
🚖Compatilibiyty - Includes 30 Different Bolts And A Four-Yoke Slot, Can Handle A Range Of Jobs On Most Cars, Trucks, Suvs And Small Engine Vehicles..
🚖100% Sale Support -We Back Up All Products For Life, 24*7 Fast Response Customer Service Free All Your Concerns. Sincerely Thanks For Your Support To Thorstone!.
🚖Package - Comes With A Heavy Duty Blow Molded Carrying Case, For Easy Transportation, Safe Storage And Quick Organization..
🚖High-Quality - All Components Are Crafted From Heat Treated Carbon Steel With Oxide Finishes, Helping The Tool Withstand Tough Pulling Jobs And Resist Rust..
Features
- MULTIFUNCTION - Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications.
- HIGH-QUALITY - All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust.
- COMPATILIBIYTY - Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles.
- PACKAGE - Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization.
- 100% SALE SUPPORT -We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
- See more on Amazon...
Brand: Thorstone | Manufacturer: Thorstone
See On Amazon #2
Orion Motor Tech Gear Puller Set, 3" 4" 6" 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal, Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit
Asin: B084SXLVK4 | Model: S00300 | PartNumber: S00300
3 Jaw Design: These Power Steering Pulley Pullers Bite Tightly Onto Your Components With Their Reinforced Jaws And Distribute Even Pulling Force To Remove Parts Without Causing Damage.
Tools For Mechanics: Drop-Forged And Heat-Treated Carbon Steel Builds With Corrosion Proof Coatings Ensure These Pullers Last For Resilient Service With Unrivaled Strength And Durability.
Reversible Jaws: Each Pulley Removal Tool Can Be Reversed To Pull Parts From Either The Inside Or Outside, With The 6" Gear Puller Provides 4 Configurations For A Sure Grip Thanks To Its Dual Fixing Holes.
Better Together: Our Bearing Puller Set Includes Three Puller Sizes, Offering Maximum Spreads Of 3", 4", And 6" And Reaches Of 4.3", 5", And 7.3" To Cover Most Applications.
Features
- UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts
- BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3, 4, and 6 and reaches of 4.3, 5, and 7.3 to cover most applications
- 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage
- REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes
- TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 3.00 x 8.00 x 8.00 inches | Weight: 5.00 pounds
Warranty: 1 year
See On Amazon #3
Performance Tool 50-100 Dual Gear Power Puller - 2 Ton Capacity Winch With 6' aircraft cable
Asin: B002NR9ZQS | Model: 50-100 | PartNumber: 50-100 | Ean: 0039564501005 | UPC: 039564501005
2 Ton Pull Capacity Rolling.
1 Ton Lift Capacity.
6 Feet Aircraft Cable.
Automatic Notch At A Time Release For Maximum Safety.
Features
- Drop forged steel safety hooks.Fit Type: Universal Fit
- Automatic notch at a time release for maximum safety
- 2 ton pull capacity rolling
- 6 feet aircraft cable
- 1 ton lift capacity
- See more on Amazon...
Brand: Performance Tool | Manufacturer: WIOGW
Dimensions: 4.40 x 21.50 x 3.00 inches | Weight: 5.60 pounds
Warranty: Lifetime Replacement Hand tools. 1 Year on Air tools. excludes blades, bits, punches, dies, bulbs, fuses, grinding wheels, belts and other consumables which must be replaced under normal use and service.
See On Amazon #4
MANNIFEN CR-V Single Hook Two Claws Puller Separate Lifting Device.TAO+ Stores Offer 4 Different Sizes of jaw Puller for You to Choose to Deal with
Asin: B07QKJHC61 | Model: SB-12222 | PartNumber: SB-12222 | Ean: 0741722391648 | UPC: 741722391648
Specification - The Screw Length Of The Two Jaws Puller Is 6.5 Inches/165Mm,Bracket Length:6 Inches/ 150Mm（The Top End Of The Bracket 2 Has Anti-Dropout Pins, And The 2-Jaw Gear Puller Actually Uses A Gear Maximum Of 5.3 Inches）,Screw Diameter (Top): 14Mm,Screw Diameter (Bottom): 14Mm,Total Length Of Claw:5.6Inches/140Mm（The Actual Length Used After Installing The Bracket On The Claw Is 3.8 Inches/97Mm）,Claw Thickness:5Mm, For More Size Description Please See Size Picture And Video..
High Quality After-Sales Service - Customers’ Feedback Always Matters. The Goal Of Our Mannifen Brand Is To Make You Satisfied With Buying. If You’Re Not 100% Content With Our 6 Inch Two Claws Gear Puller, Please Feel Free To Contact Us. We'll Try Our Best To Provide You With A Satisfactory Solution..
Wide Application - The Two Jaws Bearing Remover Is Widely Used In Various Bearings That Are Not Easy To Disassemble. 2-Jaw Separator Tool For Removal Of Stuck Or Small Tolerance Pulleys, Gears, Bearings And More Without Damage Them..
Convenient Adjustment - The 2 Jaw Gear Puller Can Adjust The Clamping Depth And Working Space,Suitable For Most Different Sizes Of Gears And Bearings.,Design Makes It Easy To Grasp The Gears And Bearings And Pull Them Out..
Features
- High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness . Heat treatment process makes it more good.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Convenient Adjustment - The 2 jaw gear puller can adjust the clamping depth and working space,Suitable for most different sizes of gears and bearings.,design makes it easy to grasp the gears and bearings and pull them out.
- Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 150mm The top end of the bracket 2 has anti-dropout pins, and the 2-Jaw Gear Puller actually uses a gear maximum of 5.3 inches ,Screw Diameter (top): 14mm,Screw Diameter (bottom): 14mm,Total length of claw:5.6inches/140mm The actual length used after installing the bracket on the claw is 3.8 inches/97mm ,Claw Thickness:5mm, For more size description please see size picture and video.
- Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- High quality after-sales service - Customers feedback always matters. The goal of our MANNIFEN brand is to make you satisfied with buying. If you re not 100% content with our 6 inch two claws gear puller, please feel free to contact us. We'll try our best to provide you with a satisfactory solution.
- See more on Amazon...
Brand: MANNIFEN | Manufacturer: TAO+
Dimensions: 0.11 x 6.25 x 2.16 inches | Weight: 0.10 pounds
See On Amazon #5
Orion Motor Tech Bearing Puller Set, 5 Ton Capacity Bearing Separator, Pinion Wheel Bearing Removal Kit with 2" and 3" Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit
Asin: B0B2DF6LXT | Model: N014-BL | PartNumber: N014-BL
3. Wide Application: The 2 Bearing Splitter Jaws’ 5 Ton Capacity Ensures They Stand Up To Punishing Use; Suitable For Professionals And Home Mechanics And Compatible With Most Vehicles, Atvs, And Light Trucks.
5. Durable Construction: Constructed From Heat Treated Cr-V Steel With Black Oxide Finish, This Pinion Bearing Puller Set Ensures Corrosion Resistance And Long-Term Durability Under Even Punishing Use.
4. Effective Operation: The Knife Like Taper Feature Allows The Jaws To Get Behind Bearings To Securely Grip Any Bearing; The Included Tools Enable You To Reach And Remove Bearings In Tight Spaces Effectively.
2. All-In-One Tool Kit: Our Bearing Separator Set Includes A 3" Bearing Separator Jaw, 2" Bearing Separator Jaw, 6" Yoke, 6-1/4" Forcing Screw, Four 4" Extension Screws, Four 5" Extension Screws, And Two 4-1/2" L-Type Legs.
Features
- 1. VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels
- 2. ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3 bearing separator jaw, 2 bearing separator jaw, 6 yoke, 6-1/4 forcing screw, four 4 extension screws, four 5 extension screws, and two 4-1/2 L-type legs
- 3. WIDE APPLICATION: The 2 bearing splitter jaws 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks
- 4. EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing; the included tools enable you to reach and remove bearings in tight spaces effectively
- 5. DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Weight: 11.00 pounds
Warranty: 1 year
See On Amazon #6
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
Asin: B08FD2G7LF | Model: SP0400 | PartNumber: SP0400
Durable Performance: Each Of These Power Steering Tools Is Constructed From Structural-Grade Aisi 1045 Medium Carbon Steel For The Necessary Strength To Get Your Work Done Right; Each Piece Is Also Heat Treated And Blackened For Even Greater Dependability And Superior Corrosion Resistance To Give You Years Of Use.
User Friendly: This Power Steering Pump Pulley Installer And Remover Set Is Intuitive But Also Comes With Clear Instructions For Easy Step By Step Operation; The Custom Blow-Molded Case Keeps Everything Well Organized And Easy To Store Or Carry Between Jobs.
Wide Compatibility: This Pulley Pump Removal Kit Is Compatible With The Saginaw, Thompson, And Ford C111 C2 Power Steering Pumps In Most Ford, Gm, And Chrysler Vehicles And The Belt-Driven Vacuum Pumps And Press-On Water Pump Pulleys In Gm's V6 Engines; The Two Forcing Screws Also Work With Most Vw Vehicles' Power Steering Systems.
Complete 7-Piece Set: This Pulley Pump Puller Kit Includes A Pulley Remover, A Pulley Installer, 2 Forcing Screws, 1 Sleeve, 2 Puller Jaws, And A Disconnect Tool; The Reversible Puller Jaw Design Also Lets You Check And Repair Pulley Flanges With Greater Ease.
Features
- POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool; the reversible puller jaw design also lets you check and repair pulley flanges with greater ease
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right; each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM's V6 engines; the two forcing screws also work with most VW vehicles' power steering systems
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation; the custom blow-molded case keeps everything well organized and easy to store or carry between jobs
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 2.00 x 9.00 x 8.00 inches | Weight: 2.00 Pounds
Warranty: 1 year warranty
See On Amazon #7
DURATECH 3-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel
Asin: B08G8SR4XV | Ean: 0820909680826 | UPC: 820909680826
Each Of The Three 3-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. Universal 4-Position Reversible Jaws Offer An Inside Or Outside Grip With Short, Standard Reach..
Jaw Spread: 3In, Jaw Reach: 3-9/16In, Puller: 3T, Maximum Use Range: 75Mm. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
The Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphatizing, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. No Need To Assemble Yourself Is The Advantage Of Duratech..
Features
- Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4-position reversible jaws offer an inside or outside grip with short, standard reach.
- The three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas.
- Jaw Spread: 3in, Jaw Reach: 3-9/16in, Puller: 3T, Maximum use range: 75mm. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon #8
TR Industrial Portable 4-Ton Dual Gear Power Puller
Asin: B074986SW9 | Model: TR81500 | PartNumber: TR81500 | Ean: 0886352815000 | UPC: 886352815000
Dual Gear And Dual Locking Pawl System Distributes Force Evenly So You Can Enjoy Easy And Consistent Pull. We Use 1/4 In. Aircraft-Grade Braided Steel Cable. Our 3/8 In. Hooks Are Drop Forged With Safety Latch And Fits Up To 1/2 In. Chains.
Hook To Hook Distance Is 4 Ft. 8 In. Fully Extended And 1 Ft. 11 In. Fully Contracted. The Maximum Capacity Is 4 Tons (8,000 Lbs) And A Safe Working Load Is 2 Tons (4,000 Lbs).
18 In. High-Leverage Handle. We Also Designed A Comfort Grip That Covers More Than Half Of The Handle (10.5 In.). You Have More Space To Comfortably Apply Force And Pull The Load More Easily.
Built To Last All Steel Frame And Gears. Premium Steel Construction Keeps The Power Puller Resistant To Wear And Tear. High Quality Galvanized Finish Gives It Excellent Protection Against Weather And Elements.
Features
- This portable power puller gives you 4 tons (8,000 lbs) of maximum pulling power and weights less than 10 lbs. It is up to 30% lighter than comparable pullers without skimping on the power. A sturdy carry storage case is included. Easily store the power puller in your truck, trailer, workshop or garage. Ideal for off road vehicle recovery, loading heavy loads unto trailers, pulling fences, logs, rocks, and stumps
- Built to last all steel frame and gears. Premium steel construction keeps the power puller resistant to wear and tear. High quality galvanized finish gives it excellent protection against weather and elements
- Dual gear and dual locking pawl system distributes force evenly so you can enjoy easy and consistent pull. We use 1/4 in. aircraft-grade braided steel cable. Our 3/8 in. hooks are drop forged with safety latch and fits up to 1/2 in. chains
- 18 in. high-leverage handle. We also designed a comfort grip that covers more than half of the handle (10.5 in.). You have more space to comfortably apply force and pull the load more easily
- Hook to hook distance is 4 ft. 8 in. fully extended and 1 ft. 11 in. fully contracted. The maximum capacity is 4 tons (8,000 lbs) and a safe working load is 2 tons (4,000 lbs)
- See more on Amazon...
Brand: TR Industrial | Manufacturer: TR Industrial
Dimensions: 8.00 x 26.50 x 4.00 Inches | Weight: 12.40 Pounds
See On Amazon #9
MANNIFEN 2 Jaw Puller, 2 Claw Gears Puller for Removal of Pulley Flywheel Bearing,Small Gear Puller (4inches)
Asin: B0C81B12GL | Model: LM120304 | PartNumber: LM120304
Multi-Purpose Reversible Jaw Puller - The Two Arms Of The Puller Can Be Mounted With The Claws Facing Inside Or Facing Outside, Suit For Internal And External Pulling Of Bearings And Other Components..
The 2 Jaw Bearing Puller Is Made Of Forged Chrome Vanadium Steel Material. It Has High Hardness And Strength. Heat Treatment Process Makes It More Good..
Mark 4"-100Mm Size - The Screw Length Of The Two Jaws Puller Is 4.52Inches/115Mm,Bracket Length:4 Inches/ 100Mm（Due To The Anti-Falling Pin, The Actual Bracket Is Only 90Mm/3.54 Inches For Use ）,Screw Diameter (Top): 12Mm,Screw Diameter (Bottom): 10Mm,Claw Length:4Inches/100Mm(The Actual Length Of The Claw Installed On The Bracket: 67Mm /2.63"), For More Size Description Please See Size Picture..
Small Bearing Puller - Ideal For Removing Miniature Bearings And Other Small Fasteners On Delicate Equipment..
Features
- 2 Jaw Bearing Puller - Perfect for removing small bearings and other fasteners with ease.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Small Bearing Puller - Ideal for removing miniature bearings and other small fasteners on delicate equipment.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Mark 4-100mm size - The screw length of the two jaws puller is 4.52inches/115mm,Bracket Length:4 inches/ 100mm Due to the anti-falling pin, the actual bracket is only 90mm/3.54 inches for use ,Screw Diameter (top): 12mm,Screw Diameter (bottom): 10mm,Claw Length:4inches/100mm(The actual length of the claw installed on the bracket: 67mm /2.63), For more size description please see size picture.
- The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more good.
- See more on Amazon...
Brand: MANNIFEN | Manufacturer: MANNIFEN
Warranty: NO
See On Amazon #10
FIVCLOK 3 Jaw Inner Pilot Bearing Puller Auto Bushing Carbon Steel Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV Motorcycle Motorbike
Asin: B0B54SX2BY | Model: WK-0987 | PartNumber: WK-0987
【Sturdy Structure】 The Internal Bearing Puller Has A Sturdy Structure, High-Strength Torque And High Toughness. As Long As The Small Wrench Is Turned Slightly, It Will Generate A Large Pulling Force, Which Can Be Slip-Resistant And Firmly Grasped, Saving Time And Saving When Using (Claw Length 80 Mm).
【Precautions】 The Claws Of The Bearing Puller Have Positive And Negative Installation Methods. Suitable All Sleeve Bearings With An Inner Diameter Of 1/2 "-2". Note: Please Keep Balance When Using It To Avoid Damage To The Hook Rod. If The Bearing Is Rusty, It Cannot Be Used (Stretching Range: 50-95Mm / 2.0-3.7 Inches).
【Widely Used】The 3 Jaw Pilot Bearing Puller Is Widely Used In Automobile Bearings, Motorcycle Electric Car Bearings, Mechanical Bearings,Etc. This Bearing Puller Is Easy To Operate, Easy To Use And Durable..
【High-Quality 】 The Inner Bearing Puller Is Made Of High-Quality Carbon Steel Through Forging And Special Heat Treatment Process, So That Our Bearing Puller Has High Strength, Toughness And Longer Service Life..
Features
- Excellent Design The Pilot Bearing Puller adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use.
- High-Quality The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life.
- Sturdy Structure The internal bearing puller has a sturdy structure, high-strength torque and high toughness. As long as the small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm)
- Widely Used The 3 Jaw Pilot Bearing Puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings,etc. This bearing puller is easy to operate, easy to use and durable.
- Precautions The claws of the bearing puller have positive and negative installation methods. suitable all sleeve bearings with an inner diameter of 1/2 -2. Note: Please keep balance when using it to avoid damage to the hook rod. If the bearing is rusty, it cannot be used (Stretching range: 50-95mm / 2.0-3.7 inches)
- See more on Amazon...
Brand: FIVCLOK | Manufacturer: FIVCLOK
See On Amazon #11
OriGlam Two Jaws Bearing Puller/Remover, Adjustable Two Jaw Puller Tool, Bearing Puller Tool, Carbon Steel Pump Pulley Remover
Asin: B099K7KRCN | Model: HAD_B0I | PartNumber: HAD_B0I
√ Easy To Use - Use The Two Jaws To Catch The Bearing; Rotate The Mandrel With The Thread; Slowly Pull Out The Bearing Of The Shaft..
√ Widely Use - This 2 Jaw Bearing Puller Widely Use In Various Bearings That Are Not Easy To Disassemble. Can Also Be Used For Automotive Flywheel, Motorcycle Wheel,Scooter Motorcycle Bearing And Gear And So On..
√ Get Into Tight Hard-To-Reach Spots- This 2 Jaw Puller Tool Can Remove Bearing Or Gears, Pulleys And Flywheels Off A Shaft In Hard-To-Reach Spots Without Damage Your Application..
√ Adjustable - 2 Jaw Bearing Remover Can Adjust The Clamping Depth. Adjustable Diameter 30-80Mm. Have Reversible Claw Legs Make It Suitable For Use As An Internal Or External Bearing Puller. The Reasonable Design Of The Claw Will Not Fall Off When Force Is Applied..
Features
- High Quality - The 2 jaw bearing puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.
- Adjustable - 2 jaw bearing Remover can adjust the clamping depth. Adjustable Diameter 30-80mm. have Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.
- Easy to Use - Use the two jaws to catch the bearing; Rotate the mandrel with the thread; Slowly pull out the bearing of the shaft.
- Get into Tight Hard-To-Reach Spots- This 2 Jaw Puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application.
- Widely Use - This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Dimensions: 1.18 x 7.09 x 3.94 inches
See On Amazon #12
MOFEEZ 3" 4" 6" 3 Jaw Gear Bearing Puller Removal Tool for Slide Gears, Pulley, and Flywheel (Silver)
Asin: B0BRXS9QVS | Model: 99MF18006-3 | PartNumber: 99MF18006-3 | Ean: 0647535997728 | UPC: 647535997728
3 Or 6 Position Design: The Universal And Reversible Jaws Offer Versatile Inside Or Outside Grip Along With Short Or Long Reach; The 3-Inch And 4-Inch Gear Puller Has 3 Positions And The 6-Inch Gear Pullers Have 6 Positions..
Package Contents: Included Is A 3-Inch Gear Puller With A 4.5-Inch Jaw Spread And 1.5-Inch Jaw Reach, 4-Inch Gear Puller With A 6.25-Inch Jaw Spread And 2.5-Inch Jaw Reach, And A 6-Inch Gear Puller With A 8.75-Inch Jaw Spread And 4.75-Inch Jaw Reach..
Built To Last: All Parts Are Made With Premium Carbon Steel For Maximum Strength. The Jaws Are Galvanized To Provide Superior Corrosion Resistance And Long Service Life..
Features
- DAMAGE-FREE REMOVAL: This Mofeez 3 jaw puller removal tool makes removal side gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more simple and damage-free. It can be worked with your wrench, ratchet, or spanner.
- BUILT TO LAST: All parts are made with premium carbon steel for maximum strength. The jaws are galvanized to provide superior corrosion resistance and long service life.
- 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
- PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
- See more on Amazon...
Brand: MOFEEZ | Manufacturer: Mofeez
Dimensions: 4.41 x 8.86 x 4.92 inches | Weight: 5.35 Pounds
See On Amazon #13
WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs
Asin: B0868DB783
Live-Center Forcing Screw: It Features Quenching And Forging, Higher Hardness, Uniform Force, Avoid Rust, 3 Interchangeable Forcing Screw Tips To Optimize Pressure And Prevent Walking Or Wobbling While Tightening..
Includes: 1Pc Yoke, Different Size Of Bolts, 3Pcs 3/8’’×16×2‘’, 3Pcs 3/8’’×16×3’’, 2Pcs 3/8’’×16×4-1/2’’, 3Pcs 3/8’’×24×1-1/2‘’, 2Pcs 1/4’’ ×28×2-1/2’’, 2Pcs 5/16’’ ×18×6’’, 3Pcs 5/16’’ ×24×3-1/2’’, 2Pcs 5/16’’ ×24×3’’, 3Pcs M8×1.25×45Mm, 2Pcs M8×1.25×65Mm, 2Pcs M8×1.5×90Mm, 3Pcs M10×1.25×35Mm; Different Size Of Washer: 6Pcs 8Mm Id, 6Pcs 10Mm Id, 4Pcs 12Mm Id..
Easy To Use: Look For Threaded Holes In The Wheel Hub Assembly. These Holes Are Designed To Be Used By The Puller For Removal. Attach The Steering Wheel Puller Using The Appropriate Bolts. As You Slowly Tighten The Center Bolt, It Presses On The Steering Shaft, Causing The Puller Body To Lift, Pulling The Steering Wheel With It..
4-Way Slotted Puller Yoke: The Whole Forging Is Integrally Formed, With Strong Toughness And Durability, Adapt To Various Steering Wheel Disassembly, No Bending And Deformation. 9Mm Thickness, 37Mm× 11Mm Hole Size, 93Mm Max Span..
Features
- Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.
- 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm 11mm hole size, 93mm Max span.
- Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
- Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
- Includes: 1pc yoke, different size of bolts, 3pcs 3/8 16 2 , 3pcs 3/8 16 3 , 2pcs 3/8 16 4-1/2 , 3pcs 3/8 24 1-1/2 , 2pcs 1/4 28 2-1/2 , 2pcs 5/16 18 6 , 3pcs 5/16 24 3-1/2 , 2pcs 5/16 24 3 , 3pcs M8 1.25 45MM, 2pcs M8 1.25 65MM, 2pcs M8 1.5 90MM, 3pcs M10 1.25 35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
- See more on Amazon...
Brand: WYNNsky | Manufacturer: WYNNsky
Dimensions: 1.75 x 10.75 x 8.25 inches
See On Amazon #14
ARES 71002 - Harmonic Balancer Puller Set - Remove Damper Pulleys in Tight Engine Compartments Without Removing The Radiator - Storage Case Included
Asin: B079J6T6JB | Model: 8542036071 | PartNumber: 8542036071 | Ean: 0818765027800 | UPC: 818765027800
Common Applications: This Set Is Compatible With Chrysler, Compatible With Gm, Compatible With Mitsubishi, Compatible With Cadillac, And Compatible With Oldsmobile Cars, Suvs, Vans, And Pickup Trucks..
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, We're Proud To Help This Great Organization..
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools That Make An Impact. You Are Backed By Our Performance Assurance. If You Have Any Issues With Your Ares Harmonic Balancer Puller Set Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund..
Includes: This High Quality Set Includes A 3-Jaw Puller, Four Lengths Of Forcing Rods, A Forcing Screw With A 3/8-Inch Square Drive For Use With A Ratchet And A 3/4-Inch Hex For Wrench Or Socket Use. It Also Includes A High Quality Storage Case So You'll Never Have To Go Looking For A Tool Again!.
Features
- ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.
- INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again!
- COMMON APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance. If you have any issues with your ARES harmonic balancer puller set set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
- See more on Amazon...
First Available: 01/01/2024
Brand: ARES | Manufacturer: ARES
Warranty: Performance Assurance Limited Lifetime Warranty
See On Amazon #15
GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2 and 5 Ton - 3627
Asin: B003TO9YDS | Model: 3627 | PartNumber: 3627 | Ean: 0634746243133, 0094715613921, 0821710362796, 0787721780809, 0082171036279, 0765042375089 | UPC: 821710362796, 094715613921, 765042375089, 634746243133, 082171036279, 787721780809
Pullers Can Also Be Converted To Two- And Three-Leg Pullers.
Legs Index Into Position And Stay In Place, Letting You Easily Support The Puller And Quickly Connect Each Jaw One At A Time To The Pulley Without Help.
Features
- Ratcheting pullers have a time-saving, indexing jaw design
- Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help
- Pullers can also be converted to two- and three-leg pullers
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: GEARWRENCH
Dimensions: 2.00 x 11.50 x 7.90 inches | Weight: 5.13 pounds
Warranty: Standard Limited Lifetime
See On Amazon #16
OEMTOOLS 37187 Harmonic Balancer Puller Kit, Heat-Treated Steel Harmonic Balance Puller Yoke, Works as Gear Puller, Steering Wheel Puller, and Crankshaft Pulley Puller
Asin: B08XSGQ56M | Model: 37187 | PartNumber: 37187 | Ean: 0076812371874 | UPC: 076812371874
Versatile Harmonic Balance Tool: Not Just A Harmonic Balancer Pulley Puller; This Gear And Pulley Puller Kit's Equipped With A Pressure Screw And Bolts That Can Be Used As A Steering Wheel Puller Kit And Crank Pulley Puller Kit; Invest In Versatility.
Durable Puller Tool: The Steering Wheel Remover's Yoke Is Heat-Treated For Strength And Durability; Lubricate The Pressure Screw Before Using The Steering Wheel Pullers To Make The Operation Easier; Not Meant To Be Used With Impact Drills.
Reliable Harmonic Puller: The Screw Tip Keeps The Harmonic Pulley Puller In Place While You Apply Torque; The Pressure Screw Will Apply Even Pressure With The Screw Tip Lifting The Harmonic Balancer Or Crank Shaft Pulley Away From The Vehicle.
Easy-To-Use Pulley Puller: Features A Yoke With 4 Slots, Which Allows For 2 Or 3 Hole Applications; The Floating Swivel Prevents Damage To Shaft Ends; Our Harmonic Balancer Kit's Washers Won't Pull Through The Yoke While Torquing The Pressure Screw.
Features
- DIY Or Pro Harmonic Balancer Remover: Removing harmonic balancers with a prybar damages components; Our pully puller tool easily and safely removes harmonic balancers, vibration dampers, pulleys, and more; Includes bolts for GM 3300 and 3800 V6 engines
- Easy-To-Use Pulley Puller: Features a yoke with 4 slots, which allows for 2 or 3 hole applications; The floating swivel prevents damage to shaft ends; Our harmonic balancer kit's washers won't pull through the yoke while torquing the pressure screw
- Versatile Harmonic Balance Tool: Not just a harmonic balancer pulley puller; This gear and pulley puller kit's equipped with a pressure screw and bolts that can be used as a steering wheel puller kit and crank pulley puller kit; Invest in versatility
- Reliable Harmonic Puller: The screw tip keeps the harmonic pulley puller in place while you apply torque; The pressure screw will apply even pressure with the screw tip lifting the harmonic balancer or crank shaft pulley away from the vehicle
- Durable Puller Tool: The steering wheel remover's yoke is heat-treated for strength and durability; Lubricate the pressure screw before using the steering wheel pullers to make the operation easier; Not meant to be used with impact drills
- See more on Amazon...
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 2.00 x 9.25 x 7.75 inches
Warranty: Limited Lifetime
See On Amazon #17
BELOMI 3 Jaw Inner Bearing Puller, Pilot Bearing Gear Puller for Auto with Reversible Jaws, Heavy Duty Gear Extractor Tool for Automotive Wheel, Pulling Kit for Motorcycle Car SUV (6 inch)
Asin: B0CJR59FHY | Model: Inner Bearing Puller | PartNumber: Inner Bearing Puller
【Practical Pulling Tool】: If You Carry Out Work To Remove Pulleys, Gears, Bearings, Cranks Etc., Our Wheel Bearing Removal Tool Makes It Easy To Pull Them Out And Protects These Car Parts Well From Damaging Them, Increasing Your Efficiency And Saving You Time..
【Package Includes】: There Are Three Size Specifications: 3 Inches, 4 Inches Or 6 Inches. Please Choose According To The Size Of The Part You Need To Handle And The Range Of 3 Jaw Puller To Avoid Unsuitable Application. And Each Package Includes 1 Piece 3-Jaw Pilot Bearing Puller..
【Wide Application】: Our 3-Jaw Inner Bearing Puller Is Perfect For A Wide Range Of Uses, Including Motorcycle Wheel, Bicycle Wheel, Pump Bearing Generator Bearing, Machine Bearing Etc. Structure Design, Gently Turning The Small Wrench Can Produce A Strong Pull Force..
【Three-Jaw Design】: The Bearing Puller Group Adopts A Three-Jaw Design. The Three-Jaw Design Can Apply Uniform Pressure, Which Can Effectively Prevent Slippage And Bearing Damage, And Ensure Stability During Use. It Allows For A Strong Pulling Force With Minimal Effort..
Features
- Premium Quality : The 3-Jaw bearing extractor pilot bearing puller is made of high-grade carbon steel material with black oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws. Our inner bearing puller is also heat-treated for exceptional strength and longevity. The corrosion-resistant coating ensures optimal performance and protection.
- Three-Jaw Design : The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure stability during use. It allows for a strong pulling force with minimal effort.
- Practical Pulling Tool : If you carry out work to remove pulleys, gears, bearings, cranks etc., our wheel bearing removal tool makes it easy to pull them out and protects these car parts well from damaging them, increasing your efficiency and saving you time.
- Wide Application : Our 3-Jaw Inner Bearing Puller is perfect for a wide range of uses, including motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc. Structure design, gently turning the small wrench can produce a strong pull force.
- Package Includes : There are three size specifications: 3 inches, 4 inches or 6 inches. Please choose according to the size of the part you need to handle and the range of 3 jaw puller to avoid unsuitable application. And each package includes 1 piece 3-jaw pilot bearing puller.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.70 x 2.00 x 1.50 inches
Warranty: 0.2
See On Amazon #18
Harmonic Balancer Puller Set, 46 Pcs Flywheel Steering Wheel Puller Kit Gear Puller Yoke Crankshaft Pulley Puller
Asin: B08953THXP | Ean: 0793345498037 | UPC: 793345498037
The Floating Swivel Prevents Damage To The Shaft Ends.
Set Includes Yoke, Pressure Screw, And Pulling Screws In A Molded Storage Case.
Yoke Is Heat-Treated Alloy Steel For Strength And Durability.
30 Different Size Bolts Included.
Features
- Kit features four yoke slots allowing unit to be used for two or three-hole applications
- 30 Different size bolts included
- The floating swivel prevents damage to the shaft ends
- Yoke is heat-treated alloy steel for strength and durability
- Set includes yoke, pressure screw, and pulling screws in a molded storage case
- See more on Amazon...
Brand: DAYUAN | Manufacturer: Yinyuan Tools
Dimensions: 1.97 x 11.81 x 8.66 inches | Weight: 4.65 pounds
See On Amazon #19
OriGlam Adjustable Two Jaw Bearing Gear Puller Remover Tool, 2 Inch Carbon Steel Pump Removing Kit for Motorcycle
Asin: B07GFLBY1R | Model: AMT_002_1 | PartNumber: AMT_002_1 | Ean: 4895192453569
√ Adjust Screw Design And Convenient To Repaired Different Size Gears And Bearing..
√ Fit For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel , Car Wheel, Machine Wheel And So On..
√ Give You Positive Pulling Power To Remove Bearings Groove Pulleys On Alternator And Power Steering Pumps..
√ Special Heat Treatment Processing. Long Use Life..
Features
- Made of overall chromium vanadium steel, it is durable.
- Special heat treatment processing. Long use life.
- Adjust screw design and convenient to repaired different size gears and bearing.
- Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
- Fit for automotive flywheel, motorcycle wheel, bicycle wheel , car wheel, machine wheel and so on.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Dimensions: 0.79 x 5.91 x 3.94 Inches
See On Amazon #20
VEVOR Carrier & Pinion Bearing Puller, Compatible with Dana 30,40,50,60,70, 80, Ford 10.25" Bearings, Pinion Puller Tool with 3 Clamshells, 45# Steel Clamshell Bearing Puller for Auto Repair
Asin: B09RHXDMBP | Model: Carrier & Pinion Bearing Puller | PartNumber: Carrier & Pinion Bearing Puller | Ean: 0840281501298 | UPC: 840281501298
Complete Equipment: All Necessary Parts Are Ready For You. There Is A Main Puller Body, Plug, Center Bolt, 3 Clamshells, Retaining Ring, And Adjuster Rings. Besides, This Unit Comes With A Handy Stand, So You Can Group All The Working Parts Together..
Superior Material: The Clamshell Bearing Tool Is Made Of Durable 45# Steel, Providing Good Performance In Withstanding Abrasion, Corrosion, And Impact. Constructed Of High-Strength Material, It Is A Robust Tool Built To Last..
Easy To Operate: There Is No Need For Other Complex Working Tools. Firstly, Place The Main Body Over The Plug And Adjust The Lower And Upper Adjusting Ring. Secondly, Select A Proper Clamshell And Tighten The Retaining Ring. Finally, You Can Use An Impact Gun To Remove The Bearing..
Premium Performance & Features: With High Working Efficiency, This Carrier Pinion Bearing Puller Can Effortlessly Remove The Pinion Bearings With Minor Damage, Drastically Reducing Dismantled Time. And The Carrier Bearing Puller Will No Longer Easily Pry Into The Pinion's Sealing Surface..
Features
- Great Compatibility: The clamshell carrier bearing puller is compatible with Dana 30, 40, 60, 70, Ford 10.25" bearings. With the clamshell bearing puller, you can quickly remove the bearings. In addition, its power is evenly distributed, so less damage will be brought to your pinion bearings.
- Premium Performance & Features: With high working efficiency, this carrier pinion bearing puller can effortlessly remove the pinion bearings with minor damage, drastically reducing dismantled time. And the carrier bearing puller will no longer easily pry into the pinion's sealing surface.
- Complete Equipment: All necessary parts are ready for you. There is a main puller body, plug, center bolt, 3 clamshells, retaining ring, and adjuster rings. Besides, this unit comes with a handy stand, so you can group all the working parts together.
- Easy to Operate: There is no need for other complex working tools. Firstly, place the main body over the plug and adjust the lower and upper adjusting ring. Secondly, select a proper clamshell and tighten the retaining ring. Finally, you can use an impact gun to remove the bearing.
- Superior Material: The clamshell bearing tool is made of durable 45# steel, providing good performance in withstanding abrasion, corrosion, and impact. Constructed of high-strength material, it is a robust tool built to last.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 11.00 x 8.90 x 5.00 inches | Weight: 31.75 pounds
See On Amazon
Looking For Something Else?
Search