Fastronix Solutions High Current Master Battery Disconnect Switch Kit
Asin: B00Y63TQLG | Model: 930-300 | PartNumber: 930-300 | Ean: 0638037089387 | UPC: 638037089387
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Contains #2 3/8" Copper Lugs, Heavy Duty Heat Shrink, And Rubber Terminal Insulators.
Works Great As A Power Disconnect For Rv's When Not In Use.
High Current (180A Continuous/1000A Intermittent) Battery Disconnect Switch With Black On/Off Plate.
Features
- Easy to Use Kit for a Professional Installation
- High Current (180A Continuous/1000A Intermittent) Battery Disconnect Switch with Black On/Off Plate
- Contains #2 3/8 Copper Lugs, Heavy Duty Heat Shrink, and Rubber Terminal Insulators
- Works Great As a Power Disconnect for RV's When Not in Use
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Weight: 1.00 Pounds
See On Amazon Similar To Fastronix Solutions High Current Master
#1
Fastronix 3/8" 2 Post 180/1000 Amp High Current Battery Disconnect Switch
Asin: B011EYWMDS | Model: 303-001 | PartNumber: 303-001 | Ean: 0638037089455 | UPC: 638037089455
Provides Single Power Cut Off To Entire Electrical System.
Works Great As A Power Disconnect For Rv's When Not In Use.
Fastronix 404-110 Terminal Covers Provide Electrical Protection To The Studs.
Required For Nhra Competition When Battery Is Relocated.
Mounts In 3/4" Hole Or Add Fastronix 980-000 Switch Mount To Install On Any Surface With Two 1/4" Holes..
Features
- Rated to 180A Continuous or 1000A Intermittent
- Mounts in 3/4 Hole or Add Fastronix 980-000 Switch Mount to Install on any Surface with Two 1/4 Holes.
- Provides Single Power Cut off to Entire Electrical System
- Required for NHRA Competition When Battery is Relocated
- Works Great As a Power Disconnect for RV's When Not in Use
- Fastronix 404-110 Terminal Covers Provide Electrical Protection to the Studs
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Weight: 0.22 Pounds
See On Amazon #2
Fastronix 300A 1/2" Severe Duty Battery Disconnect Switch with Face Plate
Asin: B07L2JRHRQ | Ean: 0635414975837 | UPC: 635414975837
Index Pin To Prevent Rotation After Installation.
Use With Fastronix 404-116 Terminal Covers For A Professional Installation.
Optional Use Smaller Auxiliary Studs Rated To 20A@12Vdc For Indicator Light Or Small Accessory.
Can Be Used In Single Pole Or Dual Pole Configuration.
Features
- 1/2" Copper Main Studs Rated to 300A@12VDC Continuous and 2000A Intermittent
- Can be Used in Single Pole or Dual Pole Configuration
- Index Pin to Prevent Rotation after Installation
- Optional Use Smaller Auxiliary Studs Rated to 20A@12VDC for Indicator Light or Small Accessory
- Use with Fastronix 404-116 Terminal Covers for a Professional Installation
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 2.63 x 5.00 x 2.63 inches | Weight: 0.00 pounds
See On Amazon #3
PerTronix 1146A Ignitor for Delco 4 Cylinder Distributor
Asin: B000JUXGAC | Model: 1146A | PartNumber: 1146A | Ean: 0694342000141, 0647367405439 | UPC: 647367405439, 694342000141
Rotating Cobalt Magnets Trigger A Hall Effect Integrated Circuit -- No Points To Burn And No Moving Parts To Wear Out.
Epoxy Molding Makes Our Module Impervious To Dirt, Oil, Grease And Moisture.
Helps Maintain Stable Timing -- No Need For Any Adjustments.
Two To One (2:1) Improvement Over Points In Current Fall Time, Increasing Coil Output. Optimal Performance Achieved When Used With Our Flame-Thrower Coils (P/Ns 40501, 40511, 40601, 40611).
Features
- Delivers twice the voltage to the spark plugs when used with Pertronix Flame-Thrower coils, increasing horsepower, fuel economy, and spark plug life.
- Two to one (2:1) improvement over points in current fall time, increasing coil output. Optimal performance achieved when used with our Flame-Thrower coils (P/Ns 40501, 40511, 40601, 40611)
- Rotating cobalt magnets trigger a Hall Effect integrated circuit -- no points to burn and no moving parts to wear out
- Helps maintain stable timing -- no need for any adjustments
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture
- See more on Amazon...
First Available: 09/15/2006
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 1.60 x 6.00 x 4.80 Inches | Weight: 0.25 Pounds
Warranty: 30 Month Limited
See On Amazon #4
Fastronix 3/8" 4 Stud Power and Ground Distribution Block with Cover
Asin: B0852RZN89 | Model: 406-260 | PartNumber: 406-260
Nickel Plated Brass Bus-Bar And Stainless Steel Hardware For Increased Current Transfer.
Use With Fastronix 2 And 4 Gauge Quality Copper Lugs (405-013 And 405-113).
Block Is 6.5"X 1.375"X 2" And Rated To 250 Amps At 12Vdc.
3 Additional 20 Amp Screw Terminals On Each Block For Smaller Wires.
Features
- Corrosion Resistant 3/8" Stainless Steel Studs
- 3 Additional 20 Amp Screw Terminals on Each Block for Smaller Wires
- Nickel Plated Brass Bus-Bar and Stainless Steel Hardware for Increased Current Transfer
- Block is 6.5x 1.375x 2 and Rated to 250 Amps at 12VDC
- Use with Fastronix 2 and 4 Gauge Quality Copper Lugs (405-013 and 405-113)
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 2.00 x 6.50 x 1.38 inches
See On Amazon #5
Fastronix 500A Ultimate Duty Battery Disconnect Switch with Mounting Bracket and Hardware
Asin: B0C5P74S47
M10 Studs Compatible With 3/8" Wire Terminals.
Use With Fastronix 404-110 Terminal Covers For A Complete Installation.
Use Mounting Bracket As A Template To Mount The Switch In Any Panel Up To 1/2" Thick.
Sealed Internals To Ip66 / Iec529 Standards.
Heavy Duty Handle Can Be Held In Place With Roll Pin (Included) Or #10 Machine Screw (Not Included).
Mounting Bracket And Hardware Included, Mount In 96 Configurations.
Features
- Rated to 500A at 12V / 300A at 24V Continuous Duty 2000A Intermittent at 12V
- Mounting Bracket and Hardware Included, Mount in 96 Configurations
- M10 Studs Compatible with 3/8 Wire Terminals
- Heavy Duty Handle can be Held in Place with Roll Pin (Included) or #10 Machine Screw (Not Included)
- Use Mounting Bracket as a Template to Mount the Switch in any Panel up to 1/2 Thick
- Sealed Internals to IP66 / IEC529 Standards
- Use with Fastronix 404-110 Terminal Covers for a Complete Installation
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 5.70 x 3.60 x 3.50 inches
See On Amazon #6
Fastronix High Current Double Pole (4-Post) Master Battery Disconnect Switch with Face Plate
Asin: B012QNZFKI | Model: 303-002 | PartNumber: 303-002 | Ean: 0638037089493 | UPC: 638037089493
Includes Wiring Diagram And Faceplate.
Meets Requirements Of Nhra And Scca.
High Current 180A Continuous Duty.
Features
- Great for Alternator Shut Off
- High Current 180A Continuous Duty
- Includes Wiring Diagram and Faceplate
- Meets requirements of NHRA and SCCA
- See more on Amazon...
Brand: Fastronix Solutions
Dimensions: 4.50 x 6.10 x 3.00 inches | Weight: 0.90 Pounds
See On Amazon #7
Pertronix 4CYL HITACHI IG
Asin: B000N2XORG | Model: 1741 | PartNumber: 1741 | Ean: 0694342000929 | UPC: 694342000929
Rotating Cobalt Magnets Trigger A Hall Effect Integrated Circuit -- No Points To Burn And No Moving Parts To Wear Out.
Epoxy Molding Makes Our Module Impervious To Dirt, Oil, Grease And Moisture.
Helps Maintain Stable Timing -- No Need For Any Adjustments.
Two To One (2:1) Improvement Over Points In Current Fall Time, Increasing Coil Output. Optimal Performance Achieved When Used With Our Flame-Thrower Coils (P/Ns 40501, 40511, 40601, 40611).
Features
- Delivers twice the voltage to the spark plugs when used with Pertronix Flame-Thrower coils, increasing horsepower, fuel economy, and spark plug life.
- Two to one (2:1) improvement over points in current fall time, increasing coil output. Optimal performance achieved when used with our Flame-Thrower coils (P/Ns 40501, 40511, 40601, 40611)
- Rotating cobalt magnets trigger a Hall Effect integrated circuit -- no points to burn and no moving parts to wear out
- Helps maintain stable timing -- no need for any adjustments
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture
- See more on Amazon...
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 18.00 x 72.00 x 60.00 inches
Warranty: LIMITED WARRANTY
See On Amazon #8
Fastronix 12 Terminal Power and Ground Distribution Block Kit
Asin: B077CSV9X2 | Model: 8541758682 | PartNumber: 8541758682 | Ean: 0635414975738 | UPC: 635414975738
24 Premium 16-14 Gauge Nylon Crimp Ring Terminals And 2 Premium 12-10 Gauge Nylon Crimp Input Ring Terminals.
High Quality Flexible Boots To Improve Looks And Prevent Shorts.
3/16" Mounting Holes On Each Side Of Terminal Block.
1/4-20 Input Stud On A Nickel Plated Bus Bar With #8 Stainless Steel Terminal Screws.
Features
- Everything You Need to Clean Up Your Wiring
- 1/4-20 Input Stud on a Nickel Plated Bus Bar with #8 Stainless Steel Terminal Screws
- 24 Premium 16-14 Gauge Nylon Crimp Ring Terminals and 2 Premium 12-10 Gauge Nylon Crimp Input Ring Terminals
- 3/16 Mounting Holes on Each Side of Terminal Block
- High Quality Flexible Boots to Improve Looks and Prevent Shorts
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 1.00 x 5.25 x 1.13 inches | Weight: 0.55 pounds
See On Amazon #9
Fastronix Solutions High Current Double Pole Master Battery Disconnect Switch (4-Post) Kit
Asin: B012UW1GAI | Model: 930-301 | PartNumber: 930-301 | Ean: 0638037089516 | UPC: 638037089516
(2) #2 3/8" Copper Lugs, H.D Heat Shrink To Seal Connections, And 2 - Rubber Terminal Insulators.
Meets Requirements Of Nhra And Scca.
Buy Quality With Fastronix!.
High Current 3/8" Studs Rated To 180A Continuous/1000A Intermittent And 10-32 Studs Rated To 20A.
Features
- Easy to Use Kit for a Professional Installation
- High Current 3/8 Studs rated to 180A Continuous/1000A Intermittent and 10-32 Studs rated to 20A
- (2) #2 3/8 Copper Lugs, H.D Heat Shrink to Seal Connections, and 2 - Rubber Terminal Insulators
- Buy Quality with Fastronix!
- Meets requirements of NHRA and SCCA
- See more on Amazon...
Brand: Fastronix Solutions
Dimensions: 2.50 x 7.30 x 1.70 inches | Weight: 1.00 Pounds
See On Amazon #10
PerTronix 020-1001 Rotor Kit for PerTronix Industrial Electronic Distributor
Asin: B002Q34F7S | Model: 020-1001 | PartNumber: 020-1001 | Ean: 0694342005566 | UPC: 694342005566
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 1.50 x 3.00 x 2.00 inches
Warranty: Limited Warranty
See On Amazon #11
Fastronix Automotive Circuit Breaker Panel with Auto-Reset (4-20A Panel)
Asin: B01453UQO2 | Ean: 0635414974939 | UPC: 635414974939
10-32 Stud Terminals On Circuit Breakers.
Only 1 Power Input Needed With Common Input Bus Bar.
Convenient All Metal Mounting Bracket.
Features
- (4) Automatic Reset Circuit Breakers
- Convenient All Metal Mounting Bracket
- 10-32 Stud Terminals on Circuit Breakers
- Only 1 Power Input Needed with Common Input Bus Bar
- See more on Amazon...
Brand: Fastronix Solutions
See On Amazon #12
Fastronix 5/16" Black Remote Battery Terminal Feed Thru
Asin: B0938GZ29H
Mounts In A 1" Hole Through Panels Up To 0.350" Thick Using #10 Fasteners.
Use With Fastronix 404-113 For A Complete Installation.
Rated To 325 Amps At 12Vdc Strong And Durable Nylon Construction.
Use To Pass Power Through A Solid Surface Without The Worry Of Shorting.
Features
- 5/16" Nickel Plated Brass Stud with Standard Size Stainless Steel Hardware
- Use to pass power through a solid surface without the worry of shorting
- Mounts in a 1 Hole Through Panels up to 0.350 Thick Using #10 Fasteners
- Rated to 325 Amps at 12VDC Strong and Durable Nylon Construction
- Use with Fastronix 404-113 for a Complete Installation
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
See On Amazon #13
Fastronix 80 Amp Surface Mount Circuit Breaker Kit with Manual Reset
Asin: B092BBSNWN
Manual Reset Lever With "Off" Button To Disconnect Circuit.
Mounts With 2 - 1/4" Fasteners; Meets Sae J162s And J1171 Specifications.
Two 1/4"-28 Unc Studs Labeled "Bat" And "Aux".
Type 3 Circuit Breaker Rated For 80 Amps At 42 Volts Dc; Ul Rated 94-V0.
Features
- Included Terminal Covers Protect the Entire Stud from Incidental Shorting
- Type 3 Circuit Breaker Rated for 80 Amps at 42 Volts DC; UL Rated 94-V0
- Manual Reset Lever with OFF Button to Disconnect Circuit
- Two 1/4-28 UNC Studs Labeled Bat and Aux
- Mounts with 2 - 1/4 Fasteners; Meets SAE J162S and J1171 Specifications
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 1.70 x 2.91 x 1.91 inches
See On Amazon #14
PerTronix 025-007A Module (replacement) for PerTronix Industrial Electronic Distributor
Asin: B004RZS7AO | Model: 025-007A | PartNumber: 025-007A | Ean: 0694342005818 | UPC: 694342005818
Features
- PerTronix 025-007A Module (replacement) for PerTronix Industrial Electronic Distributor
- See more on Amazon...
First Available: 07/16/2016
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 5.50 x 6.00 x 6.00 inches | Weight: 0.10 pounds
Warranty: Limited Warranty
See On Amazon #15
Pertronix 1281R PerTronix 12820 Module replacement (only) (one module) for 1282 Ignitor Kit. Distributor Rotor Rotor 1281/1481/1482
Asin: B00I3Q4P8G | Model: 1281R | PartNumber: 1281R | Ean: 0694342518592 | UPC: 694342518592
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 1.50 x 6.13 x 4.75 Inches | Weight: 0.07 Pounds
Warranty: LIMITED WARRANTY
See On Amazon #16
PerTronix 022-1201 Cap Kit for D23-02A for PerTronix Industrial Electronic Distributor
Asin: B00GOXMI3E | Model: 022-1201 | PartNumber: 022-1201 | Ean: 0694342014186 | UPC: 694342014186
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 5.50 x 6.00 x 6.00 inches | Weight: 0.19 pounds
Warranty: Limited Warranty
See On Amazon #17
Pertronix 1247P12 12 Volt Positive Ground Ford 4 Cylinder Ignitor
Asin: B004OXLFNU | Model: 1247P12 | PartNumber: 1247P12 | Ean: 0694342013868 | UPC: 694342013868
Rotating Cobalt Magnets Trigger A Hall Effect Integrated Circuit -- No Points To Burn And No Moving Parts To Wear Out.
Epoxy Molding Makes Our Module Impervious To Dirt, Oil, Grease And Moisture.
Helps Maintain Stable Timing -- No Need For Any Adjustments.
Two To One (2:1) Improvement Over Points In Current Fall Time, Increasing Coil Output. Optimal Performance Achieved When Used With Our Flame-Thrower Coils (P/Ns 40501, 40511, 40601, 40611).
Features
- Delivers twice the voltage to the spark plugs when used with Pertronix Flame-Thrower coils, increasing horsepower, fuel economy, and spark plug life.
- Two to one (2:1) improvement over points in current fall time, increasing coil output. Optimal performance achieved when used with our Flame-Thrower coils (P/Ns 40501, 40511, 40601, 40611)
- Rotating cobalt magnets trigger a Hall Effect integrated circuit -- no points to burn and no moving parts to wear out
- Helps maintain stable timing -- no need for any adjustments
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture
- See more on Amazon...
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 1.50 x 6.12 x 4.75 inches
Warranty: Guaranteed for 30 months... We Stand Behind It!
See On Amazon
Looking For Something Else?
Search