KUS USA Reed Switch Diesel Fuel Water Level Sensor, Standard American Output 240-30 ohm, SSS SSL, Includes Mounting Gasket and Screws, 5"
Asin: B00Y831IMY | Model: 151322 | PartNumber: 151322 | Ean: 0859678005028 | UPC: 859678005028
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Operating: 12V/24V, -40° F To + 185° F (-40° C To +85° C).
For Use In: Diesel, Fuel, Gasoline, Water, Oem Replacement..
Included: Sending Unit (1 Pc), Nbr Mounting Gasket (1 Pc), 10-24 Hex Screws (5 Pcs), Installation Instruction (1 Pc).
Mounting Method: Sae 5 Hole Mounting Pattern ( Not Equidistant ).
Features
- SIGNAL OUTPUT: Standard American Output, 240 ohm - 30 ohm (Empty - Full), Non-Linear Output, 18-21mm Per Step
- MOUNTING METHOD: SAE 5 Hole Mounting Pattern ( NOT equidistant )
- OPERATING: 12V/24V, -40 F to + 185 F (-40 C to +85 C)
- INCLUDED: Sending Unit (1 pc), NBR Mounting Gasket (1 pc), 10-24 Hex Screws (5 pcs), Installation Instruction (1 pc)
- FOR USE IN: Diesel, Fuel, Gasoline, Water, OEM Replacement.
- See more on Amazon...
Brand: KUS | Manufacturer: WEMA USA
Dimensions: 2.50 x 13.00 x 6.00 inches | Weight: 1.19 Pounds
See On Amazon Similar To KUS USA Reed Switch Diesel
#1
KUS USA Reed Switch Diesel Fuel Water Level Sensor, Standard American Output 240-30 ohm, SSS SSL, Includes Mounting Gasket and Screws, 12"
Asin: B00Y831WQQ | Model: JKS02196 | PartNumber: JKS02196 | Ean: 0859678005165 | UPC: 859678005165
Features
- SIGNAL OUTPUT: Standard American Output, 240 ohm - 30 ohm (Empty - Full), Non-Linear Output, 18-21mm Per Step
- See more on Amazon...
Brand: KUS | Manufacturer: WEMA USA
Dimensions: 2.50 x 13.00 x 6.00 inches
See On Amazon #2
Fuel Sending Unit 240-33 ohms 5"(130mm) Marine for Boat RV Truck Vehicle Fuel Gas Sender Fuel Tank Sending Unit Fuel Water Level Sensor Fuel Level Sending Unit Boat Fuel Gauge Sending Unit
Asin: B092MXD2JT | Model: BY130-240 | PartNumber: BY130-240 | Ean: 0757842002272 | UPC: 757842002272
[Easy To Install] The Fuel Level Sending Unit Comes With Gasket,Mounting Screws,Well-Written And Illustrated Instructions; The Wiring Instructions Are Straight Forward And Easy To Follow.
.
100Tech Guarantees With 1 Year Limited Warranty & Free Lifetime Technical Support
Attention: To Allow The Fule Sender Not Hit The Bottom Of The Tank, Please Measure From The Top Of Your Tank To The Bottom On The Outside And Subtract 1 Inch The Length Of Sender.
.
[The Size Of Float] The Diameter Of Float Is 1.38"(35Mm). If You Have To Drill The Hole, Diameter 1.50"(38Mm) Hole Would Be Perfect..
Sae 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel And Rugged Construction. Wide Application: It Could Support Fuel Level Gauge And Water Level Gauge For Boat/Auto.
.
The Fule/Water Level Sensor With American Standard Output 240-33 Ohms (240 Ohms At Empty, 33 Ohms At Full). If You Need Lengths Other Than 4"-32", Please Contact Us Directly For More Information.
.
Features
- 100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed Switch(Imported from Japan). It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability.
Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.
- The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). If you Need Lengths Other than 4-32, Please Contact us Directly for More Information.
- [Easy to Install] The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions; The Wiring Instructions are Straight Forward and Easy to follow.
- SAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto.
- 100Tech Guarantees with 1 Year Limited Warranty & Free Lifetime Technical Support
Attention: To Allow the Fule Sender not Hit the Bottom of the Tank, Please Measure from the Top of Your Tank to the Bottom on the Outside and Subtract 1 Inch the Length of Sender.
- [The Size of Float] The Diameter of Float is 1.38(35mm). If You Have to Drill the hole, Diameter 1.50(38mm) Hole Would be Perfect.
- See more on Amazon...
Brand: 100Tech | Manufacturer: 100TECH direct
See On Amazon #3
Moeller Marine Products 035765-10, Electrical Reed Switch Fuel Sending Unit, 15 Inch Tank Depth
Asin: B000MTCRC8 | Model: 035765-10 | PartNumber: 035765-10 | Ean: 0039729000046, 0739729000045 | UPC: 739729000045, 039729000046
Fuel Measurements Are Taken From The Float.
Calibrated To The Industry Standard Of 33-240 Ohms.
Sender Length Is 1″ Shorter Than Tank Depth.
Collects Fuel Information More Consistently Than Swing Arm Senders.
Features
- Stainless steel construction provides efficient performance
- Collects fuel information more consistently than swing arm senders
- Fuel measurements are taken from the float
- Sender length is 1 shorter than tank depth
- Calibrated to the Industry Standard of 33-240 Ohms
- See more on Amazon...
First Available: 01/19/2007
Brand: Moeller | Manufacturer: Moeller
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.60 Pounds
Warranty: Manufacturer
See On Amazon #4
Kus 150mm Standard American 240-33ohm Fuel Sender Fuel Level Sensor Tank Sending Unit for Boat Truck Car RV
Asin: B09CYFXB3W | Model: 220872150 | PartNumber: 220872150 | Ean: 0721703539986 | UPC: 721703539986
Wiring: Connect The Blue Wire To The Ground (-) And The Other Wire To The Instrument Signal Wire.
Notice: Please Note Whether The Selected Length Is Correct Before Purchasing, Because The Length Of The Fuel Level Transmitter Should Be Less Than The Depth Of The Tank, The Length Of The Fuel Level Transmitter Should Be Short Depending On The Tank Material.
Application: Applicable To Automobiles, Ships, Yachts, Etc., It Can Be Used For Fuel, Water, Kerosene And Any Liquid Without Impurities.
Simple Installation: Damping Cover Is Optional, And Assembled With C-Ring, Easy For Installation.Just Remove Old Fuel Gas Sender Then Install New Fuel Level Sensor, Installation Only Takes About 15 Minutes.
Features
- Features: The exterior is made of 316 stainless steel, not easy to damage, and the output signal is stable, simple and strange structure , anti-vibration, anti-explosion, corrosion resistant
- Simple Installation: Damping cover is optional, and assembled with C-ring, easy for installation.Just remove old fuel gas sender then install new fuel level sensor, installation only takes about 15 minutes
- Wiring: Connect the blue wire to the ground (-) and the other wire to the instrument signal wire
- Application: Applicable to automobiles, ships, yachts, etc., it can be used for fuel, water, kerosene and any liquid without impurities
- Notice: Please note whether the selected length is correct before purchasing, because the length of the fuel level transmitter should be less than the depth of the tank, the length of the fuel level transmitter should be short depending on the tank material
- See more on Amazon...
Brand: NEWMAIX | Manufacturer: Newmaix
Weight: 0.60 pounds
Warranty: 1 year
See On Amazon #5
Moeller Reed Switch Sending Unit, 10" 035762-10
Asin: B00C508IE8
Designed For Use In Gasoline Applications Calibrated To 33 To 240 Ohms.
10" Length For 11" Tank Depth.
Reed Switch Sending Units Collect Fuel Level Information More Consistently Than Swingarm Senders. They Achieve This By Taking The Measurement From The Float-Which Is Still A Moving Part. However, The Fluctuation Is Much Less Because The Range Of Motion Is Much Less. Durable 316 Type, Stainless Steel Construction Provides Efficient Performance..
Features
- Moeller Reed Switch Sending Unit (Requires Dash Mounted Gauge)
- Reed Switch Sending Units collect fuel level information more consistently than swingarm senders. They achieve this by taking the measurement from the float-which is still a moving part. However, the fluctuation is much less because the range of motion is much less. Durable 316 Type, Stainless Steel construction provides efficient performance.
- Designed for use in gasoline applications Calibrated to 33 to 240 Ohms
- 10 LENGTH FOR 11 TANK DEPTH
- See more on Amazon...
Brand: Moeller
See On Amazon #6
Moeller 035768-10 Reed Switch Fuel Sending Unit 21 inch Tank Depth
Asin: B00SJJR5IE | Model: 035768-10 | PartNumber: 035768-10 | Ean: 0739729010464 | UPC: 739729010464
Reed Switch Senders Dramatically Reduce "Slosh Fluctuations" Which Are Inherent With Swingarm Units.
Black Wire Is Ground.
Sender Top-Mounts In Aluminum, Plastic, Or Stainless Steel Fuel Tanks.
Materials (Stainless-Steel W/ Nitrile Rubber Float) Provide Superior Corrosion Protection.
Designed For All Types Of Marine Vessels.
Suitable For Gasoline, Ethanol, Diesel, Bio-Diesel, And Non-Potable Water.
Features
- For tanks 21" (553mm) deep
- Suitable for gasoline, ethanol, diesel, bio-diesel, and non-potable water
- Reed Switch senders dramatically reduce slosh fluctuations which are inherent with swingarm units
- Designed for all types of marine vessels
- Sender top-mounts in aluminum, plastic, or stainless steel fuel tanks
- Materials (stainless-steel w/ nitrile rubber float) provide superior corrosion protection
- Black wire is ground
- See more on Amazon...
Brand: Moeller | Manufacturer: Moeller Marine
Dimensions: 22.90 x 2.75 x 4.60 inches | Weight: 0.43 Pounds
See On Amazon #7
Seachoice 15531 Fuel Sender Reed Switch, 7 Inches Long, Compatible with Most 33 (Full) and 240 (Empty) OHM Fuel Gauges
Asin: B079Q7HBQL | Model: 15531 | PartNumber: 15531 | Ean: 0719249155319 | UPC: 719249155319
No Moving Mechanical Parts, Which Optimizes Durability And Reliability.
Features A Stainless Steel Immersion Tube, Corrosion-Resistant Plated Mounting Flange, Gasket (Sae 5 Hole), And .250-Inch Insulated Spade Connectors.
Compatible With 33 (Full) And 240 (Empty) Ohm Gauges.
Features
- Reliably monitors fuel levels to provide fuel gauge (sold separately) with the most accurate readings
- Compatible with 33 (full) and 240 (empty) ohm gauges
- No moving mechanical parts, which optimizes durability and reliability
- Features a Stainless Steel immersion tube, corrosion-resistant plated mounting flange, gasket (SAE 5 hole), and .250-inch insulated spade connectors
- See more on Amazon...
Brand: SEACHOICE | Manufacturer: Seachoice
Dimensions: 2.99 x 10.24 x 2.99 inches
Warranty: SEACHOICE PRODUCTS (SEACHOICE) warrants the original consumer purchaser that SEACHOICE consumer products will be free from defective materials or workmanship, under normal use and service, for a period of one (1) year from the original purchase date. This Warranty is void if the consumer product warranted has been damaged by accident or unreasonable use, neglect, improper service, unauthorized alterations, or other cause not arising out of defects in material or workmanship. In no event shall SEACHOICE PRODUCTS be liable for loss of use of its consumer product nor other incidental or consequential costs, expenses or damages incurred by any person. During the warranty period, your SEACHOICE product will either be repaired or it will be replaced with a like product (at SEACHOICE option) when returned prepaid and insured, with proof-of-purchase date to SEACHOICE at the address listed below.
See On Amazon #8
Moeller Marine 035770-10 23" Reed Switch Sending Unit
Asin: B07PDJ5VFQ
Brand: Moeller
See On Amazon #9
Moeller Reed Switch Sending Unit, 14" 035765-10
Asin: B00A8OLJE4
Brand: Moeller
Weight: 0.95 Pounds
See On Amazon #10
VDO 226-623 Reed Switch Fuel Sender
Asin: B00T9LZXA8 | Model: 226-623 | PartNumber: 226-623 | Ean: 0754059064512 | UPC: 754059064512
Brand: VDO | Manufacturer: VDO
Dimensions: 3.00 x 10.00 x 3.00 inches | Weight: 0.60 Pounds
Warranty: Warranty
See On Amazon
Looking For Something Else?
Search