YG-1 EMD61024 Carbide V7 Mill INOX Corner Radius End Mill, 4 Flute, Stub Length, 2" Length, 3/8"
Asin: B012FTIEZQ | Model: EMD61024 | PartNumber: EMD61024
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates; Corner Radius R.020.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates; Corner Radius R.020
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
See On Amazon Similar To YG1 EMD61024 Carbide V7 Mill
#1
YG-1 EMB37032 Carbide V7 Mill INOX End Mill, 4 Flute, Regular Length, 3" Length, 1/2"
Asin: B0080AURZA | Model: EMB37032 | PartNumber: EMB37032
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG1
Weight: 0.00 Pounds
See On Amazon #2
YG-1 EMB12012 Carbide V7 Mill INOX End Mill, 4 Flute, Regular Length, 2" Length, 3/16"
Asin: B0080AUIHC | Model: EMB12012 | PartNumber: EMB12012
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
First Available: 03/12/2017
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #3
YG-1 EMD61032 Carbide V7 Mill INOX Corner Radius End Mill, 4 Flute, Stub Length, 2" Length, 1/2"
Asin: B012F5COIS | Model: EMD61032 | PartNumber: EMD61032
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
First Available: 03/12/2017
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #4
YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080HAEHY | Model: 89573 | PartNumber: 89573
37-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- 37-degree helix provides increased cutting action and chip evacuation compared to lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.30 Pounds
See On Amazon #5
YG-1 E5978 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080HAMV2 | Model: 89902 | PartNumber: 89902 | Ean: 0768413467666 | UPC: 768413467666
37-Degree Helix Provides Increased Cutting Action And Chip Evacuation Compared To Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- 37-degree helix provides increased cutting action and chip evacuation compared to lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #6
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 5" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJUA6 | Model: 39598 | PartNumber: 39598 | Ean: 0300878206451 | UPC: 300878206451
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #7
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CJOLQ | Model: 39573 | PartNumber: 39573 | Ean: 0300878206291 | UPC: 300878206291
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 Pounds
See On Amazon #8
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJYAW | Model: 39904 | PartNumber: 39904 | Ean: 0300878206475 | UPC: 300878206475
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #9
YG-1 - 1573 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080B71DA | Model: 01573 | PartNumber: 01573
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Suitable For Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and pocketing, as well as general-purpose machining
- Suitable for machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 Pounds
See On Amazon #10
YG-1 EMB73080 8.0 mm Carbide V7 Mill INOX End Mill, 5 Flute, Regular Length, 63 mm Length
Asin: B012GWWUVQ | Model: EMB73080 | PartNumber: EMB73080
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #11
YG-1 EMB41120 12.0 mm Carbide V7 Mill INOX End Mill, 4 Flute, Short Length, 73 mm Length
Asin: B012GWUV4O | Model: EMB41120 | PartNumber: EMB41120
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #12
YG-1 EMB41160 16.0 mm Carbide V7 Mill INOX End Mill, 4 Flute, Short Length, 82 mm Length
Asin: B012GWUV3A | Model: EMB41160 | PartNumber: EMB41160
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #13
YG-1 EMD60040 Carbide V7 Mill INOX End Mill, 4 Flute, Stub Length, 3" Length, 5/8"
Asin: B012FTIFQY | Model: EMD60040 | PartNumber: EMD60040
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
First Available: 05/15/2017
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #14
YG-1 EMD60064 Carbide V7 Mill INOX End Mill, 4 Flute, Stub Length, 4" Length, 1"
Asin: B012F5BZ74 | Model: EMD60064 | PartNumber: EMD60064
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Metal Removal Rates.
Designed For Mild Steels, Stainless Steel, Cast Iron, Tool Steels, Titanium Alloys, Pre-Hardened Steels And Low Hardness Material.
Features
- Special flute geometry eliminates vibrations
- Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, pre-hardened steels and low hardness material
- Excellent work piece finishes
- Higher speeds, deeper cuts and metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #15
YG-1 EMD45100 Carbide V7 Mill Steel Corner Radius End Mill, 4 Flute, Multiple Helix, Short Length, 66 mm Length, 10.0 mm
Asin: B012F5B0VK | Model: EMD45100 | PartNumber: EMD45100
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Higher Metal Removal Rates.
Designed For Machine Mild Steels, Cast Irons, Tool Steels, And Low Hardened Steels Up To Hrc 40.
Features
- Special flute geometry and multiple helix eliminate vibrations
- Designed for machine mild steels, cast irons, tool steels, and low hardened steels up to HRc 40
- Excellent work piece finishes
- Higher speeds, deeper cuts and higher metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #16
YG-1 EMD49064 Carbide V7 Mill Steel Corner Radius End Mill, 4 Flute, Multiple Helix, Regular Length, 4" Length, 1"
Asin: B012F59SEG | Model: EMD49064 | PartNumber: EMD49064
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Higher Metal Removal Rates.
Designed For Machine Mild Steels, Cast Irons, Tool Steels, And Low Hardened Steels Up To Hrc 40.
Features
- Special flute geometry and multiple helix eliminate vibrations
- Designed for machine mild steels, cast irons, tool steels, and low hardened steels up to HRc 40
- Excellent work piece finishes
- Higher speeds, deeper cuts and higher metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #17
YG-1 EMD59064 Carbide V7 Mill Steel Corner Radius End Mill, 4 Flute, Multiple Helix, Stub Length, 4" Length, 1"
Asin: B012F571EU | Model: EMD59064 | PartNumber: EMD59064
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Higher Metal Removal Rates.
Designed For Machine Mild Steels, Cast Irons, Tool Steels, And Low Hardened Steels Up To Hrc 40.
Features
- Special flute geometry and multiple helix eliminate vibrations
- Designed for machine mild steels, cast irons, tool steels, and low hardened steels up to HRc 40
- Excellent work piece finishes
- Higher speeds, deeper cuts and higher metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #18
YG-1 EMD57064 Carbide V7 Mill Steel End Mill, 4 Flute, Multiple Helix, Stub Length, 4" Length, 1"
Asin: B012F570PA | Model: EMD57064 | PartNumber: EMD57064
Excellent Work Piece Finishes.
Higher Speeds, Deeper Cuts And Higher Metal Removal Rates.
Designed For Machine Mild Steels, Cast Irons, Tool Steels, And Low Hardened Steels Up To Hrc 40.
Features
- Special flute geometry and multiple helix eliminate vibrations
- Designed for machine mild steels, cast irons, tool steels, and low hardened steels up to HRc 40
- Excellent work piece finishes
- Higher speeds, deeper cuts and higher metal removal rates
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #19
YG-1 E5974 Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 50 Deg Helix, 2 Flutes, 3.5" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080HBHTS | Model: 37595 | PartNumber: 37595 | Ean: 0768413467383 | UPC: 768413467383
50-Degree Helix Offers Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Stub Length Cutting Edges Increase The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for high-performance machining on aluminum, stainless steel, and copper
- Stub length cutting edges increase the strength of the tool, making it less likely to break in the workpiece
- 50-degree helix offers increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.95 Pounds
See On Amazon
Looking For Something Else?
Search