Joystick PS2 Module - SunFounder DC 5V Joystick Breakout Module Game Controller Compatible with Arduino and Raspberry Pi
Asin: B014KQLE8Q | Ean: 0701715366947 | UPC: 701715366947
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Cross Rocker Is A Bidirectional 10K Resistor; Its Resistance Changes With Different Directions. Push The Joystick Towards Different Directions And The Voltage Read Increases Or Decreases.
Press It Down, Then The Output Is Low Level And The Corresponding Led Lights Up; Otherwise It Stays Off..
Game Joystick Ps2 Module Suits Compatible With Arduino Ps2 , Connects To Two Analog Outputs, The Robot Is At Your Commands With X,Y Control, And One Of Digital Output (Z)..
Features
- Compatible with Arduino and Raspberry Pi
- Game joystick PS2 module suits compatible with Arduino PS2 , connects to two analog outputs, the robot is at your commands with X,Y control, and one of digital output (Z).
- The cross rocker is a bidirectional 10k resistor; its resistance changes with different directions. Push the joystick towards different directions and the voltage read increases or decreases
- Press it down, then the output is low level and the corresponding LED lights up; otherwise it stays off.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.02 pounds
See On Amazon Similar To Joystick PS2 Module SunFounder DC
#1
Teyleten Robot Dual-axis XY Joystick Module PS2 Game Joystick Control Lever Sensor Game Controller Sensor Board Module KY-023 for Arduino Raspberry (5pcs)
Asin: B0CPFDKWZF
Features
- PS2 joystick Game joystick module Electronic building blocks standard interface and 2.54mm pin Interface lead, metal joystick.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #2
HiLetgo Game Joystick Sensor Game Controller Sensor JoyStick Breakout Module for Arduino PS2 Raspberry Pi
Asin: B00P7QBGD2 | Model: 8541667209 | PartNumber: 8541667209 | Ean: 0701466173115 | UPC: 701466173115
X, Y-Axis Output For The Two Potentiometers, You Can Read Through The Ad Conversion Twist Angle..
For Two Degrees Of Freedom Servo Ptz Control Or Other Remote Proportional Control..
Like The Next Press The Joystick, You Can Move All The Way To Touch The Authority For The Digital Output, Has Been Pulled..
Two Analog Outputs, All The Way To Digital Output..
Features
- High-quality rocker, long life, stable performance.
- Two analog outputs, all the way to digital output.
- X, Y-axis output for the two potentiometers, you can read through the AD conversion twist angle.
- Like the next press the joystick, you can move all the way to touch the authority for the digital output, has been pulled.
- For two degrees of freedom servo PTZ control or other remote proportional control.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 1.80 x 4.00 x 2.60 inches
See On Amazon #3
WWZMDiB 6Pcs Dual-Axis Button Joystick Module PS2 Game Joystick Control Stick Sensor for Arduino PS2 Raspberry Pi
Asin: B0BX6CW5SP | Ean: 0735812202426 | UPC: 735812202426
🥇【Analog Output】:X, Y, 2 Axis Analog Output.
🥉The X And Y Readings In The Original State Have A Voltage Of 2.5 V. When Pressed In The Direction Of The Arrow, The Voltage Increases To A Maximum Of 5 V. In The Opposite Direction Of The Arrow, The Voltage Value Decreases To A Minimum Of 0 V..
🥈【Digital Output】:Z, Digital Key Output.
⚡【Power Supply】:5V.
Features
- Dual-Axis Button Joystick Module Rocker is generally used in aerial models of drones, video games, RC cars, gimbals and other devices. Many devices with screens also often use rockers as input control for menu selection.
- Power Supply 5V
- Analog output X, Y, 2 Axis analog output
- Digital output Z, digital key output
- The X and Y readings in the original state have a voltage of 2.5 V. When pressed in the direction of the arrow, the voltage increases to a maximum of 5 V. In the opposite direction of the arrow, the voltage value decreases to a minimum of 0 V.
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #4
HiLetgo 2pcs Gamepad Joystick Shield for Arduino Expansion Board Analog Keyboard and Mouse Function
Asin: B08KZVS4GZ | Model: 3-01-1658 | PartNumber: 3-01-1658
The Bluetooth Module Interface Has Been Added, Convenient Bluetooth Wireless Serial Communication..
Operating Voltage :3.5V Or 5V.
The "I2c" Communication Interface Has Been Added Compatible With Arduino Uno.
The "Nokia 5110 Lcd" Interface Has Been Added.
Features
- The "NRF24L01" interace has been added
- The Nokia 5110 LCD interface has been added
- The bluetooth module interface has been added, Convenient Bluetooth wireless serial communication.
- The I2C communication interface has been added Compatible with Arduino UNO
- Operating voltage :3.5v or 5v
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
WMYCONGCONG 10 PCS Game Joystick Breakout Module Game Controller Replacement Joystick Control Stick Compatible with PS2 Switch Joy-Con Controller
Asin: B01N59MK0U | Model: 13 | PartNumber: 13 | Ean: 0642954049386 | UPC: 642954049386
Bi-Directional 10 K Resistor, The Resistance Changes With The Rocker In A Different Direction..
Package Content: 10 Pcs Game Controller Joystick Module. Not Designed For High Current Applications..
Module Uses 5V Power Supply, The Original State Of X, Y Read Voltage Of 2.5 V. When Pressing At The Arrow Direction, Voltage Increases, Maximum Is 5 V, At Opposite Direction Of The Arrow, The Voltage Value Decreases, Minimum Is 0 V..
Do Port For Digital Output, Ao Port For Analog Output..
Features
- Game joystick module compatible with PS2, electronic building blocks standard connector with 2.54mm pin.
- DO port for digital output, AO port for analog output.
- Bi-directional 10 k resistor, the resistance changes with the rocker in a different direction.
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5 v, at opposite direction of the arrow, the voltage value decreases, minimum is 0 v.
- Package Content: 10 pcs Game Controller Joystick Module. NOT designed for high current applications.
- See more on Amazon...
Brand: WMYCONGCONG | Manufacturer: WGCD
See On Amazon #6
WWZMDiB 12Pcs Dual-Axis Button Joystick Module PS2 Game Joystick Control Stick Sensor for Arduino PS2 Raspberry Pi
Asin: B0BX6FMC2H | Ean: 0735812202419 | UPC: 735812202419
🥇【Analog Output】:X, Y, 2 Axis Analog Output.
🥉The X And Y Readings In The Original State Have A Voltage Of 2.5 V. When Pressed In The Direction Of The Arrow, The Voltage Increases To A Maximum Of 5 V. In The Opposite Direction Of The Arrow, The Voltage Value Decreases To A Minimum Of 0 V..
🥈【Digital Output】:Z, Digital Key Output.
⚡【Power Supply】:5V.
Features
- Dual-Axis Button Joystick Module Rocker is generally used in aerial models of drones, video games, RC cars, gimbals and other devices. Many devices with screens also often use rockers as input control for menu selection.
- Power Supply 5V
- Analog output X, Y, 2 Axis analog output
- Digital output Z, digital key output
- The X and Y readings in the original state have a voltage of 2.5 V. When pressed in the direction of the arrow, the voltage increases to a maximum of 5 V. In the opposite direction of the arrow, the voltage value decreases to a minimum of 0 V.
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #7
Wishiot Thumb Joystick Module Dual Axis Sensor Game Controller Sensor Joystick Breakout Module Compatible with Arduino PS2 Raspberry Pi (10)
Asin: B089VXPHDH | Model: LS0058X10 | PartNumber: LS0058X10
✧【Applicable】:Game Stick Module For Arduino Ps2, Electronic Building Block Standard Connector With 2.54Mm Pins, Can Be Easily Connected To Arduino By Normal Io Expansion Shield With Cables.
✧Please Feel Free To Ask Any Questions You May Have And Will Respond Within 24 Hours. We Will Give You A Satisfactory Solution.
✧【Output】:The Do Port Is Used For Digital Output, And The Ao Port Is Used For Analog Output.
✧【Composition】:The Joystick Is A Combination Of 2 Analog Potentiometers And A Digital Switch, Just Connect To The Two Analog Inputs And The Robot Can Listen To Your Commands With X,Y Control. Bidirectional 10 K Resistor, The Resistance Varies With The Joystick In Different Directions.
Features
- Regarding the voltage :You will get 10 joystick sensor modules. The module uses 5V power supply, and the original state reading voltage of X and Y is 2.5V. In the direction of the arrow, the voltage increases, the maximum value is 5V, and in the opposite direction of the arrow, the voltage value decreases, and the minimum value is 0V
- Composition The joystick is a combination of 2 analog potentiometers and a digital switch, just connect to the two analog inputs and the robot can listen to your commands with X,Y control. Bidirectional 10 k resistor, the resistance varies with the joystick in different directions
- Applicable Game stick module for Arduino PS2, electronic building block standard connector with 2.54mm pins, can be easily connected to Arduino by normal IO Expansion Shield with cables
- Output The DO port is used for digital output, and the AO port is used for analog output
- Please feel free to ask any questions you may have and will respond within 24 hours. We will give you a satisfactory solution
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Dimensions: 1.57 x 3.15 x 0.79 inches
See On Amazon #8
Wishiot Thumb Joystick Module Dual Axis Sensor Game Controller Sensor Joystick Breakout Module Compatible with Arduino PS2 Raspberry Pi (2)
Asin: B0BFQTLM5T
✧【Applicable】:Game Stick Module For Arduino Ps2, Electronic Building Block Standard Connector With 2.54Mm Pins, Can Be Easily Connected To Arduino By Normal Io Expansion Shield With Cables.
✧【 Any Questions?】Please Click “Wishiot”(You Can Find "Sold By Wishiot" Under Buy Now Button), In The New Page, Click “Ask A Question” To Contact Us.
✧【Output】:The Do Port Is Used For Digital Output, And The Ao Port Is Used For Analog Output.
✧【Composition】:The Joystick Is A Combination Of 2 Analog Potentiometers And A Digital Switch, Just Connect To The Two Analog Inputs And The Robot Can Listen To Your Commands With X,Y Control. Bidirectional 10 K Resistor, The Resistance Varies With The Joystick In Different Directions.
Features
- Regarding the voltage :You will get 2 joystick sensor modules. The module uses 5V power supply, and the original state reading voltage of X and Y is 2.5V. In the direction of the arrow, the voltage increases, the maximum value is 5V, and in the opposite direction of the arrow, the voltage value decreases, and the minimum value is 0V
- Composition The joystick is a combination of 2 analog potentiometers and a digital switch, just connect to the two analog inputs and the robot can listen to your commands with X,Y control. Bidirectional 10 k resistor, the resistance varies with the joystick in different directions
- Applicable Game stick module for Arduino PS2, electronic building block standard connector with 2.54mm pins, can be easily connected to Arduino by normal IO Expansion Shield with cables
- Output The DO port is used for digital output, and the AO port is used for analog output
- Any questions? Please click Wishiot (you can find Sold by Wishiot under Buy Now button), in the new page, click Ask a question to contact us
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Dimensions: 0.79 x 1.57 x 0.79 Inches
See On Amazon #9
DEVMO 5PCS Joystick Breakout Module Shield PS2 Joystick Game Controller Compatible with Ar-duino
Asin: B07RB493PT | Ean: 0053742110452 | UPC: 053742110452
★Module Uses 5V Power Supply, The Original State Of X, Y Read Voltage Of 2.5 V. When Pressing At The Arrow Direction, Voltage Increases, Maximum Is 5 V, At Opposite Direction Of The Arrow, The Voltage Value Decreases, Minimum Is 0 V..
★Package Includes:5Pcs Xy Joystick Module..
★Directional Movements: Two 10K Metal Rocker Potentiometers.
★Do Port For Digital Output, Ao Port For Analog Output..
Features
- Game joystick module for Ar-duino PS2, electronic building blocks standard connector with 2.54mm pin.
- DO port for digital output, AO port for analog output.
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5 v, at opposite direction of the arrow, the voltage value decreases, minimum is 0 v.
- Directional Movements: two 10k metal rocker potentiometers
- Package Includes:5pcs XY joystick module.
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #10
DKARDU 6 pcs Dual-axis XY Joystick Module PS2 Module Game Joystick Control Lever Sensor KY-023 XY Dual-axis Joystick Breakout Module with Dupont Cable for Arduino
Asin: B0B5GLYPLT | Model: JK-US-497 | PartNumber: JK-US-497
【Output】:The Do Port Is Used For Digital Output, And The Ao Port Is Used For Analog Output.
【Composition】:The Joystick Is A Combination Of 2 Analog Potentiometers And A Digital Switch, Just Connect To The Two Analog Inputs And The Robot Can Listen To Your Commands With X,Y Control..
【Resistor】: Cross Joystick Is A Bi-Directional 10K Resistor, With The Rocker In Different Directions, The Tap Resistance With The Change..
【Composition】:The Joystick Is A Combination Of 2 Analog Potentiometers And A Digital Switch, Just Connect To The Two Analog Inputs And The Robot Can Listen To Your Commands With X,Y Control..
Features
- Voltage :The module uses DC 3.3V-5V power supply, and the original state reading voltage of X and Y is 2.5V. In the direction of the arrow, the voltage increases, the maximum value is 5V, and in the opposite direction of the arrow , the voltage value decreases, and the minimum value is 0V
- Composition The joystick is a combination of 2 analog potentiometers and a digital switch, just connect to the two analog inputs and the robot can listen to your commands with X,Y control.
- Output The DO port is used for digital output, and the AO port is used for analog output
- Resistor : Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the tap resistance with the change.
- Composition The joystick is a combination of 2 analog potentiometers and a digital switch, just connect to the two analog inputs and the robot can listen to your commands with X,Y control.
- See more on Amazon...
Brand: DKARDU | Manufacturer: DKARDU
See On Amazon #11
!5Pin Joystick Breakout Module Shield PS2 Joystick Controller FJ
Asin: B0CTJBW5WB | Model: HEPBAK | PartNumber: HEPBAK | Ean: 9485557665888
!5Pin Joystick Breakout Module Shield Ps2 Joystick Controller Fj.
Brand: HEPBAK | Manufacturer: HEPBAK
Weight: 0.11 Pounds
See On Amazon #12
2 Pcs Dual-axis XY Joystick Module for Arduino ps2 Joystick Module New
Asin: B09SPZVMV5 | Ean: 4653023123421
Brand: CNCZoo | Manufacturer: CNCZoo
See On Amazon #13
Treedix 10pcs PS2 Joystick Breakout Module Game Controller Compatible with Arudino
Asin: B07YS9F9RG | Ean: 0765756501835 | UPC: 765756501835
Ky-023 Ps2 Game Joystick.
Package Content: 10 Pcs Joystick Module..
Module Uses 5V Power Supply, The Original State Of X, Y Read Voltage Of 2.5 V. When Pressing At The Arrow Direction, Voltage Increases, Maximum Is 5 V, At Opposite Direction Of The Arrow, The Voltage Value Decreases, Minimum Is 0 V..
Compatible With The Arduino Sensor Interface.
Features
- 100% brand new and high quality.
- Compatible with the Arduino sensor interface
- KY-023 PS2 Game Joystick
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5 v, at opposite direction of the arrow, the voltage value decreases, minimum is 0 v.
- Package Content: 10 pcs joystick module.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
See On Amazon #14
2 Channel PS2 Game Rocker Push Button Module for Arduino for PS2 Joystick Electronic Blocking
Asin: B07PF4VH3H | Ean: 5693439542163
Brand: Paialu | Manufacturer: Paialu
See On Amazon
Looking For Something Else?
Search