HSS 1-3/8" Shell Reamer- Spiral Flute
Asin: B016LDMN36
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3/4" Hole Diameter.
Left Hand.
Fits Arbor No. 7.
3" Overall Length.
Brand: Vermont Gage | Manufacturer: Meda - Superior Import
See On Amazon Similar To HSS 13 8 Shell Reamer
#1
Performance Tool W2967 Tapered Reamer Set with T-Handle and Carbon Steel Contstruction to Align Holes or Remove Burrs from Pipe, Tubes, and More (2-Piece), Black
Asin: B073XVRG74 | Model: W2967 | PartNumber: W2967 | Ean: 0039564012730 | UPC: 039564012730
T-Handle Design For Easy Turning And Sure Handling.
Lifetime Warranty: Each Tool Is Tested Against Industry Standards For Hardness, Torque, Finish, And Usability And Should Last A Lifetime Under Normal Use.
Capacity: 1/8" To 1/2" (3 - 13Mm) And 5/32" To 7/8" (4 - 22Mm).
The Heat Treated #45 High Carbon Steel For Longer Service Life.
Features
- Tapered reamers will help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials
- The heat treated #45 high carbon steel for longer service life
- T-handle design for easy turning and sure handling
- Capacity: 1/8 to 1/2 (3 - 13mm) and 5/32 to 7/8 (4 - 22mm)
- LIFETIME WARRANTY: Each tool is tested against industry standards for hardness, torque, finish, and usability and should last a lifetime under normal use
- See more on Amazon...
Brand: Performance Tool | Manufacturer: Performance Tool
Dimensions: 8.65 x 0.90 x 4.25 inches | Weight: 0.55 pounds
Warranty: lifetime
See On Amazon #2
Mriuuod Hand Reamer Tool, Tapered Reamer Set, 3-13mm(1/8''-1/2'') & 5-16mm( "-5/8") Bridge Pin Hole Handle Tapered Reamers 6 Fluted Chamfer Reaming Guitar Woodworker Luthier Tool
Asin: B0CDPVKZS1
Design: With Removable T-Handle, Easy Turning And Sure Handling. It Can Save You The Power To Reaming And Control. Comes In A Transparent Plastic Box, Easy To Carry.
Packing Includes :2 Pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13Mm) Size And 1/5" -5/8 "(5Mm -16Mm) Size, 1 Pieces 6Mm Hacksaw Drill, 1 Pieces Transparent Plastic Box.
Wildly Used: Handle Drilling Tool Is Suitable For Taper Holes On Top Of Planks, Chamfering, Easy Screw Sinking Holes. Also Suitable For Enlarge Bridge Pin Holes Or Other Holes In Guitar..
Function Well: Reamers For Metal Remove Burrs From Cut Pipe, Tubing, And Conduit, And Enlarge And Countersink Holes In Sheet Metal, Plastic, Copper, Softwoods And Other Materials..
Features
- Premium Material: Made of high quality carbon steel with precision cutting edges. sturdy and durable, rust and corrosion resistant, not easy to deform and break.
- Function Well: reamers for metal remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, copper, softwoods and other materials.
- Design: With removable T-handle, easy turning and sure handling. it can save you the power to reaming and control. Comes in a transparent plastic box, Easy to carry
- Wildly Used: Handle drilling tool is suitable for taper holes on top of planks, chamfering, easy screw sinking holes. Also suitable for enlarge bridge pin holes or other holes in guitar.
- Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8 -1/2 (3-13mm) size and 1/5 -5/8 (5mm -16mm) size, 1 pieces 6mm Hacksaw Drill, 1 pieces transparent plastic box
- See more on Amazon...
Brand: Mriuuod | Manufacturer: Mriuuod
See On Amazon #3
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
Drill America 5/8" Bridge/Construction Reamer with 1/2" Shank, DWR Series
Asin: B00FXJGTO4 | Model: DWRRBSS5/8 | PartNumber: DWRRBSS5/8 | Ean: 0887861150637 | UPC: 887861150637
Point Is Tapered To Permit Entry Into Overlapping Holes.
High Speed Steel For Use In A Wide Range Of Materials Such As Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.
Short Length Facilitates Use In Areas With Limited Access With Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools..
Bridge Reamers Are Used To Align Existing Holes Prior To Bolt Or Rivet Installation.
Features
- Bridge Reamers are also called Construction Reamers
- Bridge reamers are used to align existing holes prior to bolt or rivet installation
- Point is tapered to permit entry into overlapping holes
- Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.
- High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #5
LifCratms 1/8"-1/2" (3-13mm) T Handle Tapered Reamer, 6 Fluted Chamfer Reaming Tool, Guitar Bridge Pin Hole Handle Tapered Reamers Woodworker Luthier Tool
Asin: B0BXG6QZKB
【Easy To Use】The 6 Fluted Chamfer Reaming Tool Has A Removable T Handle, Provides A Leverage For Easier Reaming, Better Rotation And Greater Control. The Product With Precision Ground Cutting Edges, Can Help You Reaming With Little Effort..
【100% Risk-Free Shopping】If You Have Any Questions Or Problems During The Purchasing Or Not Satisfied With The Product, Please Feel Free To Contact Us Via Amazon Email, We Will Try Our Best To Give You A Satisfied Solution. Please Rest Assured To Order, We Wish You A Happy Shopping Experience..
【Function Well】The T Handle Tapered Reamer With A Capacity Of 1/8" To 1/2", Is A Useful Tool For Removing Burrs From Wood, Plastic, Cut Pipe, Tubing, Conduit, Wallboard, Etc. Also Suitable For Enlarge Bridge Pin Holes Or Other Holes In Guitar..
【Premium Material】The Bridge Pin Hole Hand Held Reamer Is Mad Of High Quality 45# Steel Which Is A Hardened And Tempered Tool Steel, Sturdy And Durable, Rust And Corrosion Resistant, Not Easy To Deform And Break..
Features
- What You Will Get 1 x T Handle Tapered Reamer, Diameter: 1/8"-1/2" (3mm-13mm), Taper: 1:10. The T shaped reamer has proper tapers holes, suitable for bridge pins or end pins. The handle is removable, convenient to storage.
- Premium Material The Bridge Pin Hole Hand Held Reamer is mad of high quality 45# Steel which is a hardened and tempered tool steel, sturdy and durable, rust and corrosion resistant, not easy to deform and break.
- Easy to Use The 6 Fluted Chamfer Reaming Tool has a removable T handle, provides a leverage for easier reaming, better rotation and greater control. The product with precision ground cutting edges, can help you reaming with little effort.
- Function Well The T Handle Tapered Reamer with a capacity of 1/8 to 1/2, is a useful tool for removing burrs from wood, plastic, cut pipe, tubing, conduit, wallboard, etc. Also suitable for enlarge bridge pin holes or other holes in guitar.
- 100% Risk-Free Shopping If you have any questions or problems during the purchasing or not satisfied with the product, please feel free to contact us via Amazon email, we will try our best to give you a satisfied solution. Please rest assured to order, we wish you a happy shopping experience.
- See more on Amazon...
Brand: LifCratms | Manufacturer: LifCratms
See On Amazon #6
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM48Q6T | Model: a20102800ux0556 | PartNumber: a20102800ux0556
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
Rough Country 7 Degree Tapered Reamer | 1/2" Shank - 10405,Black
Asin: B086H23PF5 | Model: 10405 | PartNumber: 10405 | Ean: 0843030189815 | UPC: 843030189815
Half Inch (1/2") Shank..
Backed By Rough Country's Lifetime Replacement Warranty.
Tapered Design Is A Must-Have To Complete Your Installation..
Durable Steel Construction..
Features
- 7 Degree Tapered Reamer | Used in the Installation of Ball joints or Tie Rod Ends.
- Durable Steel Construction.
- Half Inch (1/2) Shank.
- Tapered Design is a Must-Have to Complete your Installation.
- Backed by Rough Country's Lifetime Replacement Warranty
- See more on Amazon...
Brand: Rough Country | Manufacturer: Rough Country
Dimensions: 2.50 x 13.00 x 4.25 inches | Weight: 2.00 Pounds
Warranty: Limited
See On Amazon #8
Mxfans High Speed Steel 29.5-33.5mm Slitting Dia Adjustable Hand Operated Reamer
Asin: B07DR2TYPC | Model: M3171225221 | PartNumber: M3171225221
Functions:The Reamer Are Used To Remove The Rotating Tool That Has Been Machined To The Thin Metal Layer Of The Surface. The Precise Size And Shape Can Be Obtained After The Hole Is Machined Through The Reamer..
Scope Of Application: Reamer Is Used For Reaming The Drilled (Or Reamed) Holes On The Workpiece, Mainly To Improve The Machining Accuracy Of The Holes And Reduce The Surface Roughness. It Is A Tool For Finishing And Semi Finishing The Holes..
Scope Of Adjustable: 29.5-33.5Mm; Product Dimension:270 X 2.9Mm/10.63 X 0.11"(L X Dia)..
Fit For A3 Steel, Alloy Steel, Cast Iron, Cast Steel, Aluminum And Other Metal Materials, Etc..
Features
- Made of HSS material, adjustable range.
- Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc.
- Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer.
- Scope of Adjustable: 29.5-33.5mm; Product Dimension:270 x 2.9mm/10.63 x 0.11(L x Dia).
- Scope of application: Reamer is used for reaming the drilled (or reamed) holes on the workpiece, mainly to improve the machining accuracy of the holes and reduce the surface roughness. It is a tool for finishing and semi finishing the holes.
- See more on Amazon...
Brand: Mxfans | Manufacturer: blhlltd
See On Amazon #9
uxcell 1/2" Hand Reamer H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool
Asin: B091K8T1CY | Model: a20103000ux0057 | PartNumber: a20103000ux0057
Wide Applications: Used For Processing, Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 1/2"; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
ATOPLEE T Handle Reamer, Tapered Straight Flute Handle Hole Pipe Reaming Tool for Wood Latches/Guitar/Woodworker/Luthier/Repairman Maintenance (1/8-1/2 inch(3.18-12.7mm))
Asin: B00NGBYP3S | Model: 43237-2 | PartNumber: 43237-2
[Smoother Holes With Bare Hands ] 1. Holes In Hard Woods Need To Be Drilled Small First And Then Reamed With A Reamer 2. Softwoods Can Be Drilled Directly With A Cone Reamer.
[Use]: Suitable For Making Tapered Holes In Wooden Boards, Chamfering, Easy To Sink Holes For Screws, Convenient And Quick, One Drill Can Replace A Large Or Small Chamfering Bit..
[Sharp Blade With Smooth Chip Removal] Perforation Accurate To 0.1 Mm,Optimized Steel For Overall Forging, With A Unique Groove For Smooth Chip Removal,Fast Drilling Speed..
{T-Handle Design Hand Tapered Reamer] } Easy Turning And Sure Handling .；The Degree Of The Taper Is:10，Overall Length: 140Mm Blade Length : 92Mm Shank Length: 90Mm Blade Head Diameter : 1/2''(12.7Mm),6 Flutes.
Features
- [45# High Speed Steel Material] Made of hardened and tempered tool steel(45# steel) with precision ground cutting edges,more hardness and durable. Grinding process,Smooth cutting,Smooth chip removal,Special tools for drilling holes in woodworking High precision and portability for woodworking
- {T-Handle Design Hand Tapered Reamer] } Easy turning and sure handling . The degree of the taper is:10 Overall length: 140mm Blade length : 92mm Shank length: 90mm Blade Head Diameter : 1/2''(12.7mm),6 flutes
- [Smoother holes with bare hands ] 1. Holes in hard woods need to be drilled small first and then reamed with a reamer 2. Softwoods can be drilled directly with a cone reamer
- [Sharp blade with smooth chip removal] Perforation Accurate to 0.1 mm,Optimized steel for overall forging, with a unique groove for smooth chip removal,Fast drilling speed.
- [Use]: Suitable for making tapered holes in wooden boards, chamfering, easy to sink holes for screws, convenient and quick, one drill can replace a large or small chamfering bit.
- See more on Amazon...
Brand: ATOPLEE | Manufacturer: ATOPLEE
See On Amazon #11
Jerax tools 4pcs Bridge/Construction Reamer Set, 3/8", 1/2", 5/8", 3/4 , M2 HSS Taper Chucking Reamer Drill Bit for Steel Alloy Aluminum Metal Wood Plastic, 3/8" or 1/2" Shank, to Enlarge/Align Holes
Asin: B09CTDQ8BN
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Weight: 1.00 Pounds
See On Amazon #12
uxcell Adjustable Hand Reamer 21-23mm High Speed Steel H8 6 Straight Flutes Milling Cutter Tool Metric Reaming Drill Bit for Metal
Asin: B07JP8FVRN | Model: a18091400ux0332 | PartNumber: a18091400ux0332
Hand Reamer: The Reamer Drill Bit Can Be Hand Operated By Use Of A Wrench, T-Handle Wrench, Extension Rod, Drill Chuck. Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Wide Applications: The Reamer Is Designed To Accurately Enlarge, Smooth Or Finish Holes In Stainless Steel, Cast Iron, Aluminum, Non-Ferrous Metals, Plastic, And Wood, Widely Used In Hole Repair Work, Pipe And Fittings, Woodworking Applications..
Features
- High-speed Steel Reamers: Accuracy: H8; Adjustment Range: 21mm - 23mm (Cutting Diameter); Tool Flute Length: 69mm / 2.72"; Square Shank Size: 10.8mm / 0.43"; Overall Length: 195mm / 7.68". Provides durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The reamer is designed to accurately enlarge, smooth or finish holes in stainless steel, cast iron, aluminum, non-ferrous metals, plastic, and wood, widely used in hole repair work, pipe and fittings, woodworking applications.
- Hand Reamer: The reamer drill bit can be hand operated by use of a wrench, T-handle wrench, extension rod, drill chuck. Used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.87 x 1.18 inches
See On Amazon #13
AOWISH T Handle Taper Reamer Set 3-13mm(1/8''-1/2'') & 5-16mm( "-5/8") Bridge Pin Hole Hand Held Tapered Reamers 6 Fluted Chamfer Reaming Guitar Woodworker Luthier Tool (2 Pieces)
Asin: B07D35C3LY | Ean: 0712195627695 | UPC: 712195627695
✔ Useful And Safer Diy Kit For Your Guitar, Ukulele, Bass, Toy Model Or Rc Airplanes..
✔ 2 Different Capacities Taper Reamers 3-13 Mm(Approx 7.5 Degree) And 5-15 Mm(Approx 3 Degree) In The Package..
✔ T Shape Handle Provides Leverage For Easier Reaming. Removable Handle Provides Convenience For Compact Storage..
✔ Recommended To Use For Sheet Metal, Plastic, Copper And Softwoods For Sure..
Features
- Made of hardened and tempered tool steel 45#. STURDY and DURABLE.
- Recommended to use for sheet metal, plastic, copper and softwoods for sure.
- Useful and safer DIY kit for your guitar, ukulele, bass, toy model or RC airplanes.
- T shape handle provides leverage for easier reaming. Removable handle provides convenience for compact storage.
- 2 Different capacities taper reamers 3-13 mm(approx 7.5 degree) and 5-15 mm(approx 3 degree) in the package.
- See more on Amazon...
Brand: AOWISH | Manufacturer: AOWISH
Weight: 0.44 pounds
See On Amazon #14
7/8 Bridge Construction Reamer Drill Bit, M2 HSS Taper Chucking Reamer for Steel Alloy Metal Wood Plastic, 1/2" Non-Slip Shank, 5-Spiral Flutes Car Reamer, to Align or Enlarge Holes, 22mm
Asin: B0CFJC1QYS
Comprehensive Design – Our 7/8" Reamer Bit Excels In Every Aspect. Featuring A Round 3-Sided Shank, A Tapered Point, And A Safe Stop Function, It Ensures A Secure Grip In The Chuck, Effortlessly Reams Imperfect Holes With Stability, And Stops The Drill Precisely Upon Hole Completion..
User Tips: 1. Always Wear Appropriate Safety Gear. 2. Securely Mount The Reamer Drill Bit In The Chuck Of Your Portable Electric Or Pneumatic Tools. 3. Position The Bit In The Predrilled Hole, Gradually Increase Speed, Maintain Pressure, Keep The Tool Steady, And Add Cutting Oil. 4. Reduce Speed Near The Desired Hole Size For A Smooth Finish..
Versatile Functionality – Our 7/8" Reamer Drill Bit Effortlessly Tackles A Wide Range Of Materials, Including Steel, Metal, Alloy Aluminum, Brass, Copper, Iron, Nickel, Plastic, And Pvc Pipes. Its Adaptability Makes It An Essential Tool For Both Woodworking And Metalworking Projects, Such As Bridge Construction, Steel Erection, And Automotive Truck Trailer Maintenance..
Built To Last, Our 7/8" Conduit Reamer Is Constructed With M2 High-Speed Steel. Featuring Five Long Tapped Right-Hand Spiral Flutes With Precisely Ground Edges, It Efficiently Drills Holes And Removes Debris, Guaranteeing Exceptional Durability And Long-Lasting Performance..
Features
- Seamlessly and Expertly - The bridge reamer, also known as construction reamers, is used to align or enlarge or smooth Predrilled holes to 7/8" and fit precisely before installing bolts or rivets. This heavy-duty 7/8" reamer drill bit is crafted to ensure seamless and expert performance in your projects.
- Built to last, our 7/8 conduit reamer is constructed with M2 high-speed steel. Featuring five long tapped right-hand spiral flutes with precisely ground edges, it efficiently drills holes and removes debris, guaranteeing exceptional durability and long-lasting performance.
- Comprehensive design Our 7/8 reamer bit excels in every aspect. Featuring a round 3-sided shank, a tapered point, and a safe stop function, it ensures a secure grip in the chuck, effortlessly reams imperfect holes with stability, and stops the drill precisely upon hole completion.
- Versatile functionality Our 7/8 reamer drill bit effortlessly tackles a wide range of materials, including steel, metal, alloy aluminum, brass, copper, iron, nickel, plastic, and PVC pipes. Its adaptability makes it an essential tool for both woodworking and metalworking projects, such as bridge construction, steel erection, and automotive truck trailer maintenance.
- User Tips: 1. Always wear appropriate safety gear. 2. Securely mount the reamer drill bit in the chuck of your portable electric or pneumatic tools. 3. Position the bit in the Predrilled Hole, gradually increase speed, maintain pressure, keep the tool steady, and add cutting oil. 4. Reduce speed near the desired hole size for a smooth finish.
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #15
Drill America 1/2" Bridge/Construction Reamer with 1/2" Shank, DWR Series
Asin: B00FXJGKK2 | Model: DWRRBSS1/2 | PartNumber: DWRRBSS1/2 | Ean: 0887861150613 | UPC: 887861150613
Point Is Tapered To Permit Entry Into Overlapping Holes.
High Speed Steel For Use In A Wide Range Of Materials Such As Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.
Short Length Facilitates Use In Areas With Limited Access With Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools..
Bridge Reamers Are Used To Align Existing Holes Prior To Bolt Or Rivet Installation.
Features
- Bridge Reamers are also called Construction Reamers
- Bridge reamers are used to align existing holes prior to bolt or rivet installation
- Point is tapered to permit entry into overlapping holes
- Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.
- High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #16
Rannb Adjustable Hand Reamer Square End Blade Reamer Adjustment Range 23mm - 26mm/29/32" - 1-1/32"
Asin: B07ZPNWMSR | Model: wby1615 | PartNumber: wby1615 | Ean: 0793610769671 | UPC: 793610769671
⭐【How To Adjust】Blades Are Adjusted By Loosening One Nut And Tightening The Other..
⭐【Applicable Material】A3 Steel, Alloy Steel, Cast Iron, Cast Steel, Aluminum And Other Metal Materials..
⭐【Adjustment Range】23Mm - 26Mm/29/32" - 1-1/32"; After Reaming The Hole Can Get The Exact Size And Shape..
⭐【Square End】Square End Allows The User To Turn The Reamer By Hand With An Adjustable Wrench Or Straight Handle Tap Wrench..
Features
- Material The Adjustable Reamer is made of premium HSS with good hardness and toughness.
- Square End Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
- How to Adjust Blades are adjusted by loosening one nut and tightening the other.
- Adjustment Range 23mm - 26mm/29/32 - 1-1/32; After reaming the hole can get the exact size and shape.
- Applicable Material A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
- See more on Amazon...
Brand: Rannb | Manufacturer: Raanb
See On Amazon #17
uxcell Chucking Reamer 12mm, H7 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutting Tool, Metric Reaming Drill Bit for Stainless Steel Metal Hole
Asin: B07K44YKXL | Model: a18092000ux0052 | PartNumber: a18092000ux0052
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials, Including Aluminum, Brass, Copper, Mild Steel, Plastics And Composites. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Machine Reamer: Used In Drilling Machines, Milling Machines, Lathes, And Machining Centers. Can Be Used With A Wide Variety Of Tool Holding Systems. Reamers Are Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Wide Applications: The Chucking Reamer Is Designed For Accurate Enlarging, Smoothing Or Finishing Holes In Stainless Steel, Cast Iron, Aluminum, Plastic, Wood, And Other Non-Ferrous Metals, Widely Used In Various Parts Of Machinery Such As Gears, Bearings, Bushings, Etc...
Features
- Specifications: Cutting Dia.: 12mm / 0.47"; Tool flute length: 45mm / 1.77"; Overall length: 145mm / 5.71". High-speed steel reamers provide durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The chucking reamer is designed for accurate enlarging, smoothing or finishing holes in stainless steel, cast iron, aluminum, plastic, wood, and other non-ferrous metals, widely used in various parts of machinery such as gears, bearings, bushings, etc..
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Machine Reamer: Used in drilling machines, milling machines, lathes, and machining centers. Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials, including aluminum, brass, copper, mild steel, plastics and composites. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 5.91 x 0.79 Inches
See On Amazon #18
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
Asin: B08ZM5TN75 | Model: a20102800ux0553 | PartNumber: a20102800ux0553
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
2-Tool Set H15 Adjustable Hand Reamer with Extension Pilot 1-1/2 in. to 1-13/16 in.
Asin: B0B9F9Q6WH | Model: H15+Pilot | PartNumber: H15+Pilot | Ean: 0753459254660 | UPC: 753459254660
Brand: Generic | Manufacturer: Variable
Dimensions: 2.00 x 14.00 x 2.00 Inches | Weight: 8.00 pounds
See On Amazon #20
Lichamp 4 Piece Reamers Set for Metal, Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers
Asin: B0B5HW8N41 | Model: TRS-A10400 | PartNumber: TRS-A10400
Wide Applications - Works Well In Free Cutting And Carbon Steels, As Well As Soft, Non-Ferrous Materials Such As Aluminum, Brass And Copper..
Safe Straight Shank - Round Shank With 3 Flats To Prevent Slipping In The Drill Chuck, Safety Flange/ Stop Collar To Prevent The Reamer Running Through The Hole..
Five Grooves Fast Drilling - Reversed Spiral Push Chips Forward And Are Ideal For Through-Hole Applications, Reduces The Friction, Runs Cooler, Performs Well In Heat, Corrosion And Rust Resistance..
M2 High Speed Steel - Hss M2 Ensures Sharp And Fast Execution In Most Hard Steel Material For Clean Results, While Provides Good Wear Resistance In Mild Steels And Non-Ferrous Materials..
Features
- Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles.
- M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials.
- Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper.
- Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance.
- Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole.
- See more on Amazon...
Brand: Lichamp | Manufacturer: Lichamp
Dimensions: 2.17 x 8.46 x 5.91 inches | Weight: 1.76 pounds
See On Amazon
Looking For Something Else?
Search