Gates Genuine 12099 Premium Molded Heater Hose
Asin: B0181GPSHY | Model: 12099 | PartNumber: 12099 | Ean: 0770075637455 | UPC: 770075637455
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Engineered To Resist Electrochemical Degradation - The Leading Cause Of Hose Failure..
Meets Sae 20R3 Type Ec Class D-1 And D-2 Specifications.Temperature Rating: -40° F To 275° F (-40° C To 135° C) In Coolant Hose Applications.Note: Gates Recommends Replacing Standard Worm Drive And Spring Loaded Clamps With Gates Powergrip(R) Sb Clamps Each Time A New Coolant Hose Is Installed.Gates - Driven By Possibility.
Inside Diameters Range From 1/4” To 1”..
Similar To Oem Specifications. Has All The Quality Features Of Gates Molded Coolant Hose..
Features
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications. Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.Gates - Driven By Possibility
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon Similar To Gates Genuine 12099 Premium Molded
#1
Gates C120 Hi-Power II Belt
Asin: B000V5NOY8 | Model: C120 | PartNumber: C120 | Ean: 0072053208672, 0072053020021 | UPC: 072053208672, 072053020021
Flex-Bonded Cords Are Strongly Bonded To The Body Of The Belt Resulting In Equal Load Distribution And The Absorption Of Bending Stress Without Cord Deterioration.
Meets Or Exceeds Rma Standards For Static Conductivity And Oil And Heat Resistance.
The Flex-Weave Cover Is A Patented Fabric Construction For Longer Cover Life, Providing Extended Protection To The Belt Core From Oil, Dirt And Heat.
Gates Curves Provide Proper Cord Support And Full Contact With The Sheave-Groove For Uniform Loading, Uniform Wear, And Increased Belt Life.
Features
- Suitable for all industrial applications, including v-flat drives
- Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave Cover is a patented fabric construction for longer cover life, providing extended protection to the belt core from oil, dirt and heat
- Meets or exceeds RMA standards for static conductivity and oil and heat resistance
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 2.45 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #2
Gates 20699 Premium Molded Coolant Hose
Asin: B000C2Y3CW | Model: 20699 | PartNumber: 20699 | Ean: 0072053052480 | UPC: 072053052480
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.20 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #3
Gates 90K-39415 Complete Serpentine Kit
Asin: B09BDH858G | Model: 90K-39415 | PartNumber: 90K-39415 | Ean: 0770075821243 | UPC: 770075821243
Meets Or Exceeds Oe Standards In Form, Function And Fit.
Note: Kit Contents Vary Depending On Specific Needs Of Vehicle Kit Application.
Includes Serpentine Belt With Premium Epdm Construction, Tensioner, Applicable Idler Pulleys And Applicable Tensioner Hardware.
Features
- Designed for convenience, easy parts sourcing and reduced customer comebacks
- Includes serpentine belt with premium EPDM construction, tensioner, applicable idler pulleys and applicable tensioner hardware
- Meets or exceeds OE standards in form, function and fit
- NOTE: Kit contents vary depending on specific needs of vehicle kit application
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Warranty: Please contact retailer/seller for assistance
See On Amazon #4
Gates 12096 Premium Molded Heater Hose
Asin: B01COA7QOG | Model: 12096 | PartNumber: 12096 | Ean: 0770075631361 | UPC: 770075631361
Engineered To Resist Electrochemical Degradation - The Leading Cause Of Hose Failure..
Meets Sae 20R3 Type Ec Class D-1 And D-2 Specifications.Temperature Rating: -40° F To 275° F (-40° C To 135° C) In Coolant Hose Applications.Note: Gates Recommends Replacing Standard Worm Drive And Spring Loaded Clamps With Gates Powergrip(R) Sb Clamps Each Time A New Coolant Hose Is Installed.Gates - Driven By Possibility.
Inside Diameters Range From 1/4” To 1”..
Similar To Oem Specifications. Has All The Quality Features Of Gates Molded Coolant Hose..
Features
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications. Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.Gates - Driven By Possibility
- See more on Amazon...
Brand: Gates | Manufacturer: Gates Racing
Dimensions: 3.00 x 9.00 x 3.00 inches
See On Amazon #5
Gates 12043 Premium Molded Heater Hose
Asin: B00GRE8ZVO | Model: 12043 | PartNumber: 12043 | Ean: 0770075571070 | UPC: 770075571070
Epdm Tube, Synthetic Fiber Knit Reinforcement, Epdm Cover.
Temperature Range: -40 Deg. F To 275 Deg. F (-40 Deg. C -135 Deg. C).
Meets Sae 20R3 Type Ec Class D-1 And D-2 Specifications.
Engineered To Resist Electrochemical Degradation – The Leading Cause Of Hose Failure.
Features
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.20 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #6
Gates 22899 Hose
Asin: B000CHKIP8 | Model: 22899 | PartNumber: 22899 | Ean: 0072053941111 | UPC: 072053941111
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.70 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #7
GATES A120 BELT
Asin: B000MUVCSW | Model: A120 | PartNumber: A120 | Ean: 0072053016987 | UPC: 072053016987
Flex-Bonded Cords Are Strongly Bonded To The Body Of The Belt Resulting In Equal Load Distribution And The Absorption Of Bending Stress Without Cord Deterioration.
Meets Or Exceeds Rma Standards For Static Conductivity And Oil And Heat Resistance.
The Flex-Weave Cover Is A Patented Fabric Construction For Longer Cover Life, Providing Extended Protection To The Belt Core From Oil, Dirt And Heat.
Gates Curves Provide Proper Cord Support And Full Contact With The Sheave-Groove For Uniform Loading, Uniform Wear, And Increased Belt Life.
Features
- Suitable for all industrial applications, including v-flat drives
- Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave Cover is a patented fabric construction for longer cover life, providing extended protection to the belt core from oil, dirt and heat
- Meets or exceeds RMA standards for static conductivity and oil and heat resistance
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.80 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #8
Gates 23499 Premium Molded Coolant Hose
Asin: B00498A70C | Model: 23499 | PartNumber: 23499 | Ean: 0770075404651 | UPC: 770075404651
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.55 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #9
Gates 480H100 Auto Part
Asin: B002H5CA90
Thickness: 3/8".
Width: 1".
Pitch: 3/16".
Brand: Gates | Manufacturer: Gates
Dimensions: 12.00 x 1.00 x 3.00 inches | Weight: 0.31 Pounds
See On Amazon #10
Genuine Gates 12092 Premium Molded Heater Hose
Asin: B01COA8MM6 | Model: 12092 | PartNumber: 12092 | Ean: 0770075629269 | UPC: 770075629269
Engineered To Resist Electrochemical Degradation - The Leading Cause Of Hose Failure..
Meets Sae 20R3 Type Ec Class D-1 And D-2 Specifications.Temperature Rating: -40° F To 275° F (-40° C To 135° C) In Coolant Hose Applications.Note: Gates Recommends Replacing Standard Worm Drive And Spring Loaded Clamps With Gates Powergrip(R) Sb Clamps Each Time A New Coolant Hose Is Installed.Gates - Driven By Possibility.
Inside Diameters Range From 1/4” To 1”..
Similar To Oem Specifications. Has All The Quality Features Of Gates Molded Coolant Hose..
Features
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications. Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.Gates - Driven By Possibility
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 2.00 x 13.00 x 5.00 inches | Weight: 0.30 Pounds
See On Amazon #11
Gates 12019 Serpentine Belt
Asin: B00QXX1PPM | Model: 12019 | PartNumber: 12019 | Ean: 0770075573456 | UPC: 770075573456
Included Components: Hose.
Package Weight: 0.3 Pounds.
Package Dimension: 12.0"L X 6.0"W X 2.0"H.
Features
- Country of origin: United States
- Package Dimension: 12.0L x 6.0W x 2.0H
- Included components: Hose
- Package Weight: 0.3 pounds
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon #12
Gates 12061 Premium Molded Heater Gates Hose
Asin: B00QL2M914 | Model: 12061 | PartNumber: 12061 | Ean: 0770075602507 | UPC: 770075602507
Engineered To Resist Electrochemical Degradation - The Leading Cause Of Hose Failure..
Meets Sae 20R3 Type Ec Class D-1 And D-2 Specifications.Temperature Rating: -40° F To 275° F (-40° C To 135° C) In Coolant Hose Applications.Note: Gates Recommends Replacing Standard Worm Drive And Spring Loaded Clamps With Gates Powergrip(R) Sb Clamps Each Time A New Coolant Hose Is Installed.Gates - Driven By Possibility.
Inside Diameters Range From 1/4” To 1”..
Similar To Oem Specifications. Has All The Quality Features Of Gates Molded Coolant Hose..
Features
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications. Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.Gates - Driven By Possibility
- See more on Amazon...
Brand: Gates | Manufacturer: GATES
Dimensions: 1.50 x 16.00 x 5.50 inches | Weight: 0.34 Pounds
See On Amazon #13
Genuine Gates 12048 Premium Molded Heater Hose
Asin: B00QKVYX42 | Model: 12048 | PartNumber: 12048 | Ean: 0770075602002 | UPC: 770075602002
Engineered To Resist Electrochemical Degradation - The Leading Cause Of Hose Failure..
Meets Sae 20R3 Type Ec Class D-1 And D-2 Specifications.Temperature Rating: -40° F To 275° F (-40° C To 135° C) In Coolant Hose Applications.Note: Gates Recommends Replacing Standard Worm Drive And Spring Loaded Clamps With Gates Powergrip(R) Sb Clamps Each Time A New Coolant Hose Is Installed.Gates - Driven By Possibility.
Inside Diameters Range From 1/4” To 1”..
Similar To Oem Specifications. Has All The Quality Features Of Gates Molded Coolant Hose..
Features
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications. Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.Gates - Driven By Possibility
- See more on Amazon...
Brand: Gates | Manufacturer: nobrandname
Dimensions: 3.00 x 5.00 x 3.00 inches | Weight: 0.20 Pounds
See On Amazon #14
Gates 6899 PoweRated V-Belt
Asin: B0044UWFEG | Ean: 0072053005042 | UPC: 072053005042
Brand: Gates | Manufacturer: Gates
Weight: 0.60 Pounds
See On Amazon #15
Gates 38599 FleetRunner Heavy-Duty Belt Drive Tensioner
Asin: B0028FLXJM | Model: 38599 | PartNumber: 38599 | Ean: 0770075169994 | UPC: 770075169994
Patented Labyrinth Seal Prevents Contamination Of Internal Parts For Maximum Durability And Service Life.
Double Row Bearings Carry More Load And Last Up To 3X Longer Than Two Individual Bearings.
Long-Lasting Steel Pulleys With Dust Shields To Protect Internal Bearings From Contamination.
Patented Design Provides Superior Belt Alignment And Tension For Improved Drive Efficiency And Life.
Features
- Optimized components engineered for maximum strength and durability
- Patented design provides superior belt alignment and tension for improved drive efficiency and life
- Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
- Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
- Double row bearings carry more load and last up to 3X longer than two individual bearings
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.00 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #16
Gates C99 Hi-Power II Belt
Asin: B000CRHMA2 | Model: C99 | PartNumber: C99 | Ean: 0072053021370 | UPC: 072053021370
Flex-Bonded Cords Are Strongly Bonded To The Body Of The Belt Resulting In Equal Load Distribution And The Absorption Of Bending Stress Without Cord Deterioration.
Meets Or Exceeds Rma Standards For Static Conductivity And Oil And Heat Resistance.
The Flex-Weave Cover Is A Patented Fabric Construction For Longer Cover Life, Providing Extended Protection To The Belt Core From Oil, Dirt And Heat.
Gates Curves Provide Proper Cord Support And Full Contact With The Sheave-Groove For Uniform Loading, Uniform Wear, And Increased Belt Life.
Features
- Suitable for all industrial applications, including v-flat drives
- Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life
- Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave Cover is a patented fabric construction for longer cover life, providing extended protection to the belt core from oil, dirt and heat
- Meets or exceeds RMA standards for static conductivity and oil and heat resistance
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #17
Gates 22099 Premium Molded Coolant Hose
Asin: B000CRHKL8 | Model: 22099 | PartNumber: 22099 | Ean: 0072053063233 | UPC: 072053063233
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #18
Gates 21599 Premium Molded Coolant Hose
Asin: B000C2Y4DU | Model: 21599 | PartNumber: 21599 | Ean: 0072053059403 | UPC: 072053059403
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon
Looking For Something Else?
Search