MIZUGIWA 1 Inch Scope Mount Rings High Profile, 11mm Dovetail, See-Thru
Asin: B01A5ICTRS | Ean: 0603161960932 | UPC: 603161960932
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3/4 Inch Gap Between Tube And Top Of Rail.
With Four Screws Design, Double Stability.
Scope Rings Are For 25.4Mm Scope Tube.
1 Inch Diameter Tube.
Features
- Scope Mount Rings, Double rings suitable for 3/8 inch or 11 mm dovetail rails.
- 1 inch diameter tube
- 3/4 inch gap between tube and top of rail
- Scope rings are for 25.4mm scope tube
- With four screws Design, Double stability
- See more on Amazon...
Brand: MIZUGIWA | Manufacturer: Mizugiwa (BJ) Co.,Ltd
See On Amazon Similar To MIZUGIWA 1 Inch Scope Mount
#1
Monstrum Precision Scope Rings | 1 inch Diameter | Picatinny | 1.00 inch Height
Asin: B083F8SY2V | Ean: 0850004377352 | UPC: 850004377352
1 Inch Diameter Rings For Mounting Standard 1 Inch Rifle Scope Tubes.
Available In Four Heights To Match Your Needs: 0.80 Inch, 1.00 Inch, 1.20 Inch, And 1.35 Inch.
Available With Either Picatinny Or Weaver Standard Base.
Monstrum Precision Scope Rings Are Precision Crafted To A Given Height Specification To Match Your Particular Rifle Setup And Preferred Cheek Weld.
Features
- 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes
- Available with either Picatinny or Weaver standard base
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.25 Pounds
See On Amazon #2
Vortex Optics Hunter 1-inch Riflescope Rings - High Height (1.22 inches), Matte Black
Asin: B003GSOI1K | Model: RING-H | PartNumber: RING-H | Ean: 0875874002166 | UPC: 875874002166
Made From Aircraft-Grade 6061-T6 Aluminum For Optimum Strength. Torque Specs: Base Clamp Screws-25-30 In/Lbs, Ring Screws-15 In/Lbs..
Backed By Our Unlimited, Unconditional, Lifetime, Vip Warranty. A Fully Transferable Promise To Repair Or Replace Your Item If It Becomes Damaged/Defective. Does Not Cover Loss, Theft, Deliberate Damage Or Cosmetic Damage That Doesn't Hinder Performance..
Sold Two Rings Per Package..
Mounting To A Picatinny Or Weaver Type Rail, The Standard, 2-Screw Hunter Rings Are A Nice Match For General Hunting Setups. Do Not Recommend The Hunter Rings For Use On Heavy Recoiling Rifles..
Features
- These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base.
- Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Do not recommend the Hunter Rings for use on heavy recoiling rifles.
- Made from aircraft-grade 6061-T6 aluminum for optimum strength. Torque Specs: Base Clamp Screws-25-30 in/lbs, Ring Screws-15 in/lbs.
- Sold two rings per package.
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- See more on Amazon...
First Available: 01/23/2023
Brand: Vortex | Manufacturer: Vortex Optics
Dimensions: 1.30 x 5.00 x 4.80 inches | Weight: 0.20 Pounds
Warranty: Unlimited, unconditional lifetime warranty.
See On Amazon #3
Modkin 1 Inch Scope Rings Set of 4, 2 Pieces High Profile Scope Mounts & 2 Pieces Medium Profile Scope Rings for Picatinny/Weaver Rail
Asin: B081NG7FCS | Ean: 0603470407869 | UPC: 603470407869
Lightweight: Aluminum Alloy With Black Anodized Surface, Sturdy And Lightweight. The Hollowed Out Is Designed To Be Extremely Lightweight And Provide Potential Vision..
Size Detail: Medium Profile Dimension: 1.9 X 1.6 X 0.8 Inch, Weight: 2 Ounce; High Profile Dimension: 2.0 X 1.6 X 0.8 Inch, Weight: 2 Ounce..
Rail Clamp Screw Design: With 1 Rail Clamp Screw And 2 Scope Clamp Screws Perside, Ensure Mount All 1 Inch Scope Firmly. Comes With 2 Pieces Allen Wrench..
Built-In Tape Protection: Not Only Can It Prevent The Scope From Being Scratched, But Also The Scope Moving Forward Due To The Recoil Force Of Multiple Shots..
Features
- Perfect for All 21mm Picatinny/ Weaver Rails: This set includes 2 pieces medium profile and 2 pieces high profile. Suitable for all 1 inch / 25.4mm scope tube.
- Built-in Tape Protection: Not only can it prevent the scope from being scratched, but also the scope moving forward due to the recoil force of multiple shots.
- Lightweight: Aluminum alloy with black anodized surface, sturdy and lightweight. The hollowed out is designed to be extremely lightweight and provide potential vision.
- Rail Clamp Screw Design: With 1 rail clamp screw and 2 scope clamp screws perside, ensure mount all 1 inch scope firmly. Comes with 2 pieces allen wrench.
- Size Detail: Medium Profile Dimension: 1.9 x 1.6 x 0.8 inch, Weight: 2 ounce; High Profile Dimension: 2.0 x 1.6 x 0.8 Inch, Weight: 2 ounce.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
Weight: 0.13 Pounds
See On Amazon #4
Sametop Handlebar Bike Pole Mount Motorcycle Clamp Mount Compatible with GoPro Hero 12 11 10 9 8 7 6 5 Session DJI Action Cameras - 360 Degree Rotation
Asin: B0BZZ6R18W | Model: SA-S58 | PartNumber: SA-S58 | Ean: 0669416260011 | UPC: 669416260011
【Wide Compatibility】Works With All Go Pro Hero Cameras: Hero12 Black, Hero11 Black, Hero10 Black, Hero9 Black, Hero8 Black, Hero7 Black, Hero7 Silver, Hero7 White, 6, 5, 4, Session, 3+, 3, 2, 1, Hero (2018), Fusion, Max And Most Action Cameras..
【Excellent Performance】Non-Slip Design Inside Of The Handlebar Mount Can Protect Your Poles From Being Scratched. Light And Durable Construction Prevents Slipping And Breaking And Minimizes Vibration And Camera Shake..
【Versatile Mount】Bike Handlebar Attach Is Perfect For Bicycling, Mountain Biking, Motocross, Skiing, Kayaking, Sup Surfing, Water Sports And Other Outdoor Action Activities..
【360° Adjustment】The Bar Mount Features 360° Rotation, Ensuring The Perfect Angle For Every Shot And Allowing Rapid Changes In Perspective For More Dynamic Footage..
Features
- Great Adaptability Mount your GoPro clamp onto any 0.35 to 1.4in (9 to 35mm) diameter of bike bicycle motorcycle handlebars, seatposts, ski poles and more tubes.
- 360 Adjustment The bar mount features 360 rotation, ensuring the perfect angle for every shot and allowing rapid changes in perspective for more dynamic footage.
- Wide Compatibility Works with all Go Pro Hero cameras: Hero12 Black, Hero11 Black, Hero10 Black, Hero9 Black, Hero8 Black, Hero7 Black, Hero7 Silver, Hero7 White, 6, 5, 4, Session, 3+, 3, 2, 1, Hero (2018), Fusion, Max and most action cameras.
- Versatile Mount Bike handlebar attach is perfect for bicycling, mountain biking, motocross, skiing, kayaking, SUP surfing, water sports and other outdoor action activities.
- Excellent Performance Non-slip design inside of the handlebar mount can protect your poles from being scratched. Light and durable construction prevents slipping and breaking and minimizes vibration and camera shake.
- See more on Amazon...
Brand: Sametop | Manufacturer: Sametop
Dimensions: 1.42 x 5.31 x 2.28 inches | Weight: 0.23 Pounds
Warranty: One year warranty for every purchase from Sametop, 30 days money back.
See On Amazon #5
Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black
Asin: B07G2SM28N | Ean: 0704715312341 | UPC: 704715312341
Mounts To Any Flat Top Picatinny Rail Equipped Rifle.
5 Ounces In Weight And 5 Inches In Total Length, With A Base Of 3 Inches And 2.5 Inches Of Spacing Between The Rings.
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Slim Profile Design Offers The Weight Of Lightweight Scope Rings With The Added Rigidity And Convenience Of A One Piece Mount.
Features
- Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Mounts to any flat top Picatinny rail equipped rifle
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.31 pounds
See On Amazon #6
Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)
Asin: B073LK77FQ | Ean: 0603470406626 | UPC: 603470406626
Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding And Holding Postion Accurately..
With 1 Rail Clamp Screw And 2 Scope Clamp Screw Per Side, Ensure Mount Any 1 Inch Scope Firmly, Just Twist Off The Nut And Mount The Base On The 21Mm Rail Easily..
The Ring Is For Most Scopes Which Are In 1 Inch / 25.4Mm Scope Tube. High Profile, 0.71 Inch Gap From Base Of Mount To Bottom Of Rings. ( Item Height: 2 Inch).
Design In Hollowed-Out Configuration Between The Ring And The Bottom Of The Base, To Release Heavy Duty When Clamping Your Scope..
Features
- Double scope ring mount for Picatinny/ Weaver Rail (21mm).
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
- With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
See On Amazon #7
CVLIFE Cantilever Scope Mounts 1 inch, Offset Dual Ring One-Piece Scope Mount, Lightweight Aluminum
Asin: B0CH9RWGHK
Offset Cantilever Mount: Scope Mount Features A 2.4" Forward Extension, Which Can Provide Better Head Placement Flexibly And Find Proper And Correct Eye Relief, Increasing Comfort And Reducing Fatigue, Which Is Important For All-Day Use..
Torx Screws: Strong Torx Screws Allow For Precise Tightening And Reduce Stripping. Comes With Spare 4 Torx Screws, Which Can Be Replaced At Any Time, Increasing Durability And Service Life..
Lightweight Material: This Offset Dual Ring Scope Mount Is Made Of 6061 Aviation Aluminum Material And Weighs Only 5.8 Oz, Which Doesn’T Add Much Extra Weight To You..
Hold Well Zero: Two Screws On Each Side Of The Ring Provide A Sturdy And Recoil-Resistant Grip To Your Scope, With Perfect Alignment Between The Front And Rear Rings. It Has Four Fastening Recoil Lugs For Tight Mounting On The Picatinny Rail, Which Can Hold Your Optic Very Securely..
Features
- 1 Inch Scope Mount: CVLIFE 1" scope mount is suitable for scopes with a diameter of 1", the spacing between the rings is 2.36", the center to base height is 1.57", base length is 3".
- Hold Well Zero: Two screws on each side of the ring provide a sturdy and recoil-resistant grip to your scope, with perfect alignment between the front and rear rings. It has four fastening recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely.
- Offset Cantilever Mount: Scope mount features a 2.4 forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.
- Lightweight Material: This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5.8 oz, which doesn t add much extra weight to you.
- Torx Screws: Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life.
- See more on Amazon...
Brand: CVLIFE | Manufacturer: CVLIFE
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon #8
Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)
Asin: B071DXCF41 | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0603470403069 | UPC: 603470403069
Lightweight: 1.15Oz Per Ring. High Profile, 20Mm/0.79In Gap From Base Of Mount To Bottom Of Rings. ( Item Height: 1.97'').
With Only 1 Rail Clamp Screw And 1 Scope Clamp Screw Per Side, Quick And Easy To Install. Precision And Repeatable Alignment..
The Ring Is For Most Scopes Which Are In 1''/ 25.4Mm Scope Tube..
Design In Hollowed-Out Configuration Between The Ring And The Bottom Of The Base, To Release Heavy Duty When Clamping Your Scope..
Features
- Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails.
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'')
- The ring is for most scopes which are in 1''/ 25.4mm scope tube.
- With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment.
- See more on Amazon...
Brand: Modkin | Manufacturer: Modkin
See On Amazon #9
Monstrum Deadlock Series Dual Ring Scope Mount | Offset Cantilever | 1 inch Diameter
Asin: B0CWMXZM7Q | Ean: 0810088816772 | UPC: 810088816772
Available In 2 Different Mount Configurations Allowing For Optimum Placement Of Your Optic: Inline Rings And Offset Cantilever Rings. Available In 1 Inch, 30 Mm, And 34 Mm Diameter Configurations..
All Monstrum Products Are Backed By A Lifetime Guarantee.
Mounts To Any Flat Top Picatinny Equipped Rifle With Custom Picatinny Locking Bolts That Slot Seamlessly Into Your Picatinny Rail With Zero Wiggle - Guaranteed To Hold Zero Against The Toughest Of Recoil.
A Lightweight 3.7 Ounces For The Inline Version To 3.9 Ounces For The Long Offset Version- 25% Lighter Than Our Previous Generation Slim Profile Series Scope Mounts.
Features
- All new rigid unibody design with strategically placed lightening cuts to reduce weight
- A lightweight 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
- Available in 2 different mount configurations allowing for optimum placement of your optic: Inline Rings and Offset Cantilever Rings. Available in 1 inch, 30 mm, and 34 mm diameter configurations.
- Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- All Monstrum products are backed by a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.27 pounds
See On Amazon #10
Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch Diameter | Black
Asin: B07MJCT11L | Ean: 0704715312389 | UPC: 704715312389
Attaches And Detaches Easily Via Integrated Quick Release Mechanism, Without Additional Tools Or Tightening.
5 Ounces In Weight And 5 Inches In Total Length, With A Base Of 3 Inches And 2.5 Inches Of Spacing Between The Rings.
2 Inches Of Forward Extension Allows Extra Flexibility For Optimum Eye Relief And Shooting Position.
Slim Profile Design Offers The Weight Of Lightweight Scope Rings With The Added Rigidity And Convenience Of A One Piece Mount.
Features
- Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles
- Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
- Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
- 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
Weight: 0.38 pounds
See On Amazon
Looking For Something Else?
Search