Drill America - DWDDL18X1/8 1/8" x 18" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B01BM3OOO6 | Model: DWDDL18X1/8 | PartNumber: DWDDL18X1/8 | Ean: 0887861061292 | UPC: 887861061292
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon Similar To Drill America DWDDL18X1 8 1
#1
Drill America 1/4" x 18" High Speed Steel Extra Long Drill Bit, DWDDL Series
Asin: B00FXHJWEA | Model: DWDDL18X1/4 | PartNumber: DWDDL18X1/4 | Ean: 0887861061377 | UPC: 887861061377
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #2
Drill America 1-1/8" Reduced Shank High Speed Steel Black & Gold Contractor Drill Bit with 3-Flat 1/2" Shank, KFD3F Series
Asin: B08SFHZ1XC | Model: KFD3F1-1/8 | PartNumber: KFD3F1-1/8 | Ean: 0887861294591 | UPC: 887861294591
135 Degree Split Point Tip For Self-Centering And Reducing Thrust. Compared To A Conventional 118 Degree Tip, These Drills Wont Go "Walking" On You..
Common Flute And Overall Length For Minimal Adjustment During Tool Changes. 3" Flute Length, 6" Overall Length, 1/2" Shank.
3-Flat 1/2" Reduced Shank Creates An Extra Secure Hold In Your Chuck..
For Use In A Wide Range Of Materials In The Iron And Steel Families Such Aluminum, Iron, Steel And Other Metal Drilling..
Features
- Contractor grade drill bit manufactured from M1 High Speed Steel.
- For use in a wide range of materials in the iron and steel families such aluminum, iron, steel and other metal drilling.
- 135 degree split point tip for self-centering and reducing thrust. Compared to a conventional 118 degree tip, these drills wont go walking on you.
- 3-Flat 1/2 reduced shank creates an extra secure hold in your chuck.
- Common flute and overall length for minimal adjustment during tool changes. 3 Flute Length, 6 Overall Length, 1/2 Shank
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 1.13 x 6.00 x 1.13 Inches
See On Amazon #3
Drill America - DWDCO1-1/8 1-1/8" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series
Asin: B00FXH8CJ6 | Model: DWDCO1-1/8 | PartNumber: DWDCO1-1/8 | Ean: 0887861042246 | UPC: 887861042246
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #4
Drill America - KFDRSD1-1/8 1-1/8" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Asin: B00AYZ4DJA | Model: KFDRSD1-1/8 | PartNumber: KFDRSD1-1/8 | Ean: 0887861037310 | UPC: 887861037310
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Chicology
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.10 pounds
See On Amazon #5
Drill America #1 x 6"" Cobalt Aircraft Extension Drill Bit, GLBCO Series,#1 (Pack of 1)
Asin: B00B2QYSEK | Model: GLBCOX61 | PartNumber: GLBCOX61 | Ean: 0887861044639 | UPC: 887861044639
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
6" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 6 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #6
Drill America 1" Reduced Shank Cobalt Drill Bit with 1/2" Shank, DWDCO Series
Asin: B00FXH9CM2 | Model: DWDCO1INCH | PartNumber: DWDCO1INCH | Ean: 0887861042222 | UPC: 887861042222
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #7
Drill America - POUDWDDL18 5 Piece High Speed Steel Extra-Long Drill Bit Set (1/4-1/2" x 18" Long), POU Series
Asin: B01H7PUJHO | Model: POUDWDDL18 | PartNumber: POUDWDDL18 | Ean: 0887861241816 | UPC: 887861241816
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Sizes included are 1/4", 5/16", 3/8", 7/16" and 1/2" with overall length of 18"
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of tool holding systems
- See more on Amazon...
First Available: 03/12/2017
Brand: Drill America | Manufacturer: Drill America
See On Amazon #8
Drill America - DWDCO1P12 #1 Cobalt Drill Bit (Pack of 12), DWDCO Series
Asin: B00FXH7ORM | Model: DWDCO1P12 | PartNumber: DWDCO1P12 | Ean: 0887861198431 | UPC: 887861198431
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Tough, High Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in tough, high tensile strength materials
- See more on Amazon...
First Available: 05/15/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #9
Drill America - KFD1008-SET 8 Piece Heavy Duty High Speed Steel Reduced Shank Drill Bit Set (9/16" - 1" x 16ths), KFD Series
Asin: B00B0XJ4QM | Model: KFD1008-SET | PartNumber: KFD1008-SET | Ean: 0887861039383 | UPC: 887861039383
135 Degree Split Point Tip For Self-Centering And Reducing Thrust.
Reduced Shank Drills Expand The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
8 Piece Set With 1/2" Reduced Shank Drill Bits.
Black And Gold Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
For Use In A Wide Range Of Materials In The Iron And Steel Families Such Aluminum, Iron, Stainless Steel And Other Hard Metal Drilling.
Features
- Manufactured from M2 premium grade high speed steel
- For use in a wide range of materials in the iron and steel families such aluminum, iron, stainless steel and other hard metal drilling
- 135 degree split point tip for self-centering and reducing thrust
- Black and gold surface treated for use in stainless steel and other hard metal drilling
- Reduced Shank Drills expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- 8 Piece Set with 1/2 Reduced Shank Drill Bits
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 4.00 pounds
See On Amazon #10
Drill America GLBCOX1218 #18 x 12" Cobalt Aircraft Extension Drill Bit, GLBCO Series
Asin: B00B2QVZHS | Model: GLBCOX1218 | PartNumber: GLBCOX1218 | Ean: 0887861045834 | UPC: 887861045834
Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
12" Overall Length For Drilling Where Extra Length For Reach Is Required.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
135° Split Point Tip Prevents Drill From Walking.
Features
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135 split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- 12 overall length for drilling where extra length for reach is required
- See more on Amazon...
First Available: 10/30/2017
Brand: Drill America | Manufacturer: Drill America
Weight: 0.99 pounds
See On Amazon #11
Drill America - DWTT8X1 m8 x 1 High Speed Steel 4 Flute Taper Tap, (Pack of 1)
Asin: B00DLCTJGA | Model: DWTT8X1 | PartNumber: DWTT8X1 | Ean: 0887861072304 | UPC: 887861072304
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #12
Drill America 1"-8 UNC High Speed Steel Taper Tap, (Pack of 1)
Asin: B00FXJYCAM | Model: DWT54923 | PartNumber: DWT54923 | Ean: 0887861070140 | UPC: 887861070140
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #13
Drill America #1 High Speed Steel Polished Drill Bit (Pack of 12), D/AP Series
Asin: B00FX8P7RU | Model: D/AP1P12 | PartNumber: D/AP1P12 | Ean: 0887861188579 | UPC: 887861188579
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
First Available: 03/12/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #14
Drill America - DMOD8 #8 Solid Carbide Drill Bit, DMOD Series
Asin: B00B4VK9FK | Model: DMOD8 | PartNumber: DMOD8 | Ean: 0887861046602 | UPC: 887861046602
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Manufactured To National Aerospace Standard 907.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Manufactured to National Aerospace Standard 907
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #15
Drill America - DWDRSD34X1-1/8 1-1/8" High Speed Steel Reduced Shank Drill Bit with 3/4" Shank, DWDRSD Series
Asin: B00FXIDG32 | Model: DWDRSD34X1-1/8 | PartNumber: DWDRSD34X1-1/8 | Ean: 0887861034784 | UPC: 887861034784
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #16
Drill America 1" x 18" Carbide Tipped Masonry Drill Bit, Dam Series
Asin: B00B4ZNZR0 | Model: DAM18X1 | PartNumber: DAM18X1 | Ean: 0887861054010 | UPC: 887861054010
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Designed For Use In Portable Electric Drill.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Designed for use in portable electric drill
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches | Weight: 1.00 pounds
See On Amazon #17
Drill America 1-1/8 x 18" Ship Auger Bit, DMS Series
Asin: B00FXE5VJS | Model: DMS73-1070 | PartNumber: DMS73-1070 | Ean: 0887861176620 | UPC: 887861176620
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
For Woodworking.
Comes Individually Packaged.
Comes With Polished Finish.
Features
- Made of carbon steel
- Comes with polished finish
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Comes individually packaged
- For woodworking
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.50 x 18.60 x 1.80 Inches | Weight: 1.30 pounds
See On Amazon #18
Drill America 1"-8 UNC High Speed Steel Tap Set
Asin: B00FXJYFCC | Model: DWT54926 | PartNumber: DWT54926 | Ean: 0887861071710 | UPC: 887861071710
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 1.00 pounds
See On Amazon #19
Drill America - DWDN1P12 #1 High Speed Steel Black Oxide Drill Bit (Pack of 12), DWDN Series
Asin: B00FXI3I1M | Model: DWDN1P12 | PartNumber: DWDN1P12 | Ean: 0887861191500 | UPC: 887861191500
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Production, Maintenance Or Portable Drilling Jobs.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for production, maintenance or portable drilling jobs
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #20
Drill America - DWTG8X1 m8 x 1 High Speed Steel 2 Flute Spiral Point Tap, DWT Series
Asin: B00DMF06TA | Model: DWTG8X1 | PartNumber: DWTG8X1 | Ean: 0887861075749 | UPC: 887861075749
Allow For Chip Accumulation In The Bottom Of The Hole.
High Speed Steel Spiral Point Tap.
Ideal For Threading A Wide Variety Of Ductile Materials, Copper And Copper Alloys, Brass And Non-Metallics.
They Are Recommended For Use In Through Or Blind Holes.
Features
- Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes
- They are recommended for use in through or blind holes
- Allow for chip accumulation in the bottom of the hole
- Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics
- High speed steel spiral point tap
- See more on Amazon...
First Available: 03/12/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon
Looking For Something Else?
Search