Drill America DWTET10X3/8-16 HSS Pulley Tap, 3/8"
Asin: B01BOGVI7M | Model: DWTET10X3/8-16 | PartNumber: DWTET10X3/8-16 | Ean: 0887861080019 | UPC: 887861080019
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications..
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction..
Round With Square End Shank..
High-Speed Steel Tools Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance..
Features
- Extension tap is used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps.
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
- Round with square end shank.
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon Similar To Drill America DWTET10X3 816 HSS
#1
Fisch Brad Point Drill Bits (10mm x 133mm) - Premium Drill Bits for Soft, Hard, Veneered and Laminated Wood, MDF and Acrylic Glass - Beveled Edge for Fast, Easy Cutting - FSF-004097 - Made in Austria
Asin: B00CE94BDC | Model: FSF-004097 | PartNumber: FSF-004097 | Ean: 9002696004097
For Use In Soft, Hard, Exotic, Veneered And Laminated Wood As Well As Mdf And Even Acrylic Glass.
Made In Austria.
Beveled Edge Leads To A Perfect Drilling Of The Diameter Without Any Deviation.
Features
- Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled
- Beveled edge leads to a perfect drilling of the diameter without any deviation
- For use in soft, hard, exotic, veneered and laminated wood as well as MDF and even acrylic glass
- Made in Austria
- See more on Amazon...
Brand: Fisch | Manufacturer: fishypea-21532
Dimensions: 0.50 x 8.00 x 1.50 inches | Weight: 0.13 Pounds
Warranty: One year limited warranty
See On Amazon #2
uxcell Straight Shank Twist Drill Bits 10mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CWWN3X | Model: a19102500ux0136 | PartNumber: a19102500ux0136
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 10mm / 0.39"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 90mm / 3.54"; Total Length : 130mm / 5.12"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #3
uxcell Straight Shank Twist Drill Bits 10mm High Speed Steel 4341 with 10mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D28Q8D | Model: a19102500ux0137 | PartNumber: a19102500ux0137
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 10mm / 0.39"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 90mm / 3.54"; Total Length : 130mm / 5.12"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #4
Drill America #10 High Speed Steel Black & Gold KFD Split Point Drill Bit (Pack of 12), KFD Series
Asin: B00FXN1K3U | Model: KFD10P12 | PartNumber: KFD10P12 | Ean: 0887861205535 | UPC: 887861205535
135° Split Point Tip Prevents Drill From "Walking".
Black And Gold Drills Are Manufactured From Premium Grade High Speed Steel.
Combination Of Hardness And Toughness For Wear Resistance.
For Use In Wood, Metal, Stainless And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- For use in wood, metal, stainless and other hard metal drilling
- 135 split point tip prevents drill from walking
- Combination of hardness and toughness for wear resistance
- Black and gold drills are manufactured from premium grade high speed steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #5
uxcell a14021800ux0716 10mm x 300mm Straight Shank Twist Drilling Bit for
Asin: B00MJSOQHY | Model: a14021800ux0716 | PartNumber: a14021800ux0716 | Ean: 0702105131299 | UPC: 702105131299
Main Color : Sliver Tone;Flute Length : 200Mm / 8".
Weight : 124G;Package Content : 1 X Twist Drill Bits.
Total Length : Total Length;300Mm /11. 8" : 300Mm /11. 8".
Cutting Diameter : 10Mm / 0.39";Shank Diameter : 10Mm / 0.39".
Features
- Product Name : Twist Drill Bit;Features : Straight Shank;Material : HSS
- Cutting Diameter : 10mm / 0.39;Shank Diameter : 10mm / 0.39
- Main Color : Sliver Tone;Flute Length : 200mm / 8
- Total Length : Total Length;300mm /11. 8 : 300mm /11. 8
- Weight : 124g;Package Content : 1 x Twist Drill Bits
- See more on Amazon...
First Available: 08/21/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 11.81 x 1.57 inches | Weight: 0.00 pounds
See On Amazon #6
MAXTOOL No.10 10pcs Identical Jobber Length Drills Dia 0.1935" HSS M35 Cobalt Twist Drill Bits Wire Gauge Numbered Straight Drills; JBN35G10R10P10
Asin: B09PHZPKK7 | Ean: 0634301956553 | UPC: 634301956553
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; No. 1 To No. 60 Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Or Uscti - United States Cutting Tool Institute Drill Standards.
Features
- Drills conform to ASME/ANSI B94.11M standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M or USCTI - United States Cutting Tool Institute drill standards
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; No. 1 to No. 60 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.20 x 3.67 x 0.20 Inches
See On Amazon #7
MAXTOOL No.10 2pcs Identical Jobber Length Drills 0.1935" HSS M35 Cobalt Twist Drill Bits Wire Gauge Gage Numbered Straight Shank Drills; JBN35G10R10P2
Asin: B085GLDCVY | Model: JBN35G10R10P2 | PartNumber: JBN35G10R10P2 | Ean: 0634301939204 | UPC: 634301939204
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; No. 1 To No. 60 Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Cobalt high speed steel ensures the bits super hard, sharp and cutting effectively with impressive performance in cutting metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; No. 1 to No. 60 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.20 x 3.67 x 0.20 Inches | Weight: 54.00 Grams
See On Amazon #8
Drill America - DWDCO10P12 #10 Cobalt Drill Bit (Pack of 12), DWDCO Series
Asin: B00FXH80AC | Model: DWDCO10P12 | PartNumber: DWDCO10P12 | Ean: 0887861198523 | UPC: 887861198523
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold Oxide Is A Thinner Oxide Surface Treatment Than Black Oxide Typically Used To Identify Cobalt Steel Tools; Performance Is Similar To Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #9
Drill America - DWDDL10X3/8 High Speed Steel 3/8" x 10" Extra Length Drill Bit, DWDDL Series
Asin: B01BM3OHW0 | Model: DWDDL10X3/8 | PartNumber: DWDDL10X3/8 | Ean: 0887861060776 | UPC: 887861060776
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For General Purpose Drilling In Applications Where Extra Length For Reach Is Required, Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Weight: 0.10 Pounds
See On Amazon #10
Topline Cutting Tools No. 10 Drill Bits Cobalt M42 4-Pk
Asin: B07CZQK1FR | Model: 504-210 | PartNumber: 504-210 | Ean: 0811898030099 | UPC: 811898030099
135-Degree Split Point.
Ground From Solid Blank; Heavy Duty.
Pack Of Four (4) In A Labeled Storage Tube.
Jobber (Standard) Length; Approximately 3.63".
Features
- High production grade M42 Cobalt
- Jobber (standard) length; approximately 3.63
- 135-Degree Split Point
- Pack of Four (4) in a labeled storage tube
- Ground from Solid Blank; Heavy Duty
- See more on Amazon...
Brand: TopLine Cutting Tools | Manufacturer: TopLine Cutting Tools
Weight: 0.02 pounds
See On Amazon #11
MAXTOOL No.10 5pcs Identical Jobber Length Drills Dia 0.1935" HSS M35 Cobalt Twist Drill Bits Wire Gauge Numbered Golden Straight Drill; JBN35G10R10P5
Asin: B085GLLNH8 | Model: JBN35G10R10P5 | PartNumber: JBN35G10R10P5 | Ean: 0634301941238 | UPC: 634301941238
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; No. 1 To No. 60 Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Cobalt high speed steel ensures the bits super hard, sharp and cutting effectively with impressive performance in cutting metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; No. 1 to No. 60 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.20 x 3.67 x 0.20 Inches | Weight: 126.00 Grams
See On Amazon #12
IVY Classic 01510 No. 10 Wire Gauge Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card
Asin: B004ZFJW14 | Model: 01510 | PartNumber: 01510 | Ean: 0738226015101 | UPC: 738226015101
Precision Ground, Bright Finish With Polished Flutes That Increase Chip Ejection.
Wire Gauge Diameter: No. 10, Decimal Inches Equivalent: 0.1935, Tap Size: 14-20 Ns, Overall Length: 3-5/8-Inch.
135-Degree Split Point For Fast Penetration And Accurate Starting With No Center Punch.
Hardened And Tempered M2 High-Speed Steel Bits Fall Between Standard Fractional Drill Sizes.
Features
- Jobber length bits designed for drilling stainless and hard steel, plastic and wood, Premium Swift Bore (Registered Trademark)
- Hardened and tempered M2 high-speed steel bits fall between standard fractional drill sizes
- Precision ground, bright finish with polished flutes that increase chip ejection
- 135-degree split point for fast penetration and accurate starting with no center punch
- Wire Gauge Diameter: No. 10, Decimal Inches Equivalent: 0.1935, Tap Size: 14-20 NS, Overall Length: 3-5/8-inch
- See more on Amazon...
Brand: IVY Classic | Manufacturer: IVY Classic
Dimensions: 0.20 x 3.60 x 0.20 Inches
See On Amazon #13
MAXTOOL No.10 5pcs Identical Jobber Length Drills Dia 0.1935" HSS M2 Twist Drill Bits Wire Gauge Gage Numbered Straight Shank Drills; JBN02H10R10P5
Asin: B085GL1MYC | Model: JBN02H10R10P5 | PartNumber: JBN02H10R10P5 | Ean: 0634301940699 | UPC: 634301940699
Fully Ground Process Ensures Excellent Chips Moving, And 135 Deg Chisel Angle With Split Point Provide Accuracy Start For Quick Penetration Without Walking And Less Logging.
Jobber Length Twist Drill Bits With Straight Shank For Cutting Metal, Plastic, And Wood Etc; No. 1 To No. 60 Are Available.
Precision Treatment Makes Drills Durable Toughness, Withstands Heavy Duty Operation, Resists Corrosion And Lubricates The Drill Bits Better For Cutting Smoothly.
All Drill Dimensional & Tolerances Conform To Asme/Ansi B94.11M Drill Standards Or Uscti - United States Cutting Tool Institute (Formerly Mcti).
Features
- Quality high speed steel ensures the bits super hard, sharp and cutting effectively with impressive cutting performance in metal, plastic, and wood etc with long tool life
- All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging
- Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly
- Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc; No. 1 to No. 60 are available
- See more on Amazon...
Brand: MaxTool | Manufacturer: TianShun Tool
Dimensions: 0.20 x 3.67 x 0.20 inches | Weight: 116.00 Grams
See On Amazon #14
Drill America DMOD10 #10 Solid Carbide Drill Bit, DMOD Series
Asin: B00B4VKHAC | Model: DMOD10 | PartNumber: DMOD10 | Ean: 0887861046626 | UPC: 887861046626
Used On Materials Such As Cast Iron, Non-Ferrous Alloys, High Silicon Aluminum, Copper, Plastics, Bronze, Hard Rubber, Plexiglass, And Other Similar Materials.
Solid Carbide Tools Offer Long Tool Life And Faster Cutting Speeds Than Other Substrates, But Are More Brittle.
Can Be Used In High Temperature Drilling Applications.
Features
- Designed for drilling abrasive materials when drilling accuracy must be maintained
- Can be used in high temperature drilling applications
- Used on materials such as cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, bronze, hard rubber, plexiglass, and other similar materials
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle
- See more on Amazon...
First Available: 12/12/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #15
uxcell 2 PCS 10mm Straight Shank Electric HSS Twist Drill Bit
Asin: B007Q8IWW2 | Model: a10112300ux0451 | PartNumber: a10112300ux0451 | Ean: 0696735400323 | UPC: 696735400323
Bit Diameter: 10Mm / 0.39"; Flute Length: 90Mm/3.54".
Package Content: 2 X Twist Drill Bit.
Total Length: 130Mm/5.1"; Color: Gray; Weight: 97G.
Shank Diameter: 10Mm / 0. 39".
Features
- Product Name: Twist Drill Bit; Material: HSS
- Shank Diameter: 10mm / 0. 39
- Bit Diameter: 10mm / 0.39; Flute Length: 90mm/3.54
- Total Length: 130mm/5.1; Color: Gray; Weight: 97g
- Package Content: 2 x Twist Drill Bit
- See more on Amazon...
First Available: 08/20/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 4.72 x 3.94 Inches | Weight: 0.00 Pounds
See On Amazon #16
Drill America m10 x .75 Tap and 9.25mm Drill Bit Kit, POU Series
Asin: B0CTWFWMQG | Model: POUMS10X.75 | PartNumber: POUMS10X.75 | Ean: 0887861311700 | UPC: 887861311700
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Set Comes In Plastic Pouch.
M10 X .75 Hss Plug Tap And Matching 9.25Mm Hss Drill Bit.
High Speed Steel Plug Hand Threading Tap Is Popular For Use In General Machine Tapping Or Cnc Tapping.
Features
- Set contains high speed steel plug hand tap and matching high speed steel drill bit
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- m10 x .75 HSS plug tap and matching 9.25mm HSS drill bit
- Set comes in plastic pouch
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #17
TopLine Cutting Tools #10 Wire Size HSS Drill Bit 4pcs Bright Finish M2 Grade
Asin: B08R3K3CTP | Model: 503-210 | PartNumber: 503-210
Standard 118-Degree Point.
Packed In A Labeled Reclosable Package.
Fully Ground From A Solid Blank.
Features
- Premium M2 Grade HSS (High Speed Steel)
- Fully Ground from a solid blank
- Standard 118-Degree Point
- Packed in a labeled reclosable package
- See more on Amazon...
Brand: TopLine Cutting Tools | Manufacturer: TopLine Cutting Tools
See On Amazon #18
Drill America 3.10MM HS Drill (DWDMM3.10)
Asin: B07SQGQD55
Brand: QUALTECH | Manufacturer: Drill America
See On Amazon #19
Drill America #10 High Speed Steel Split Point Drill Bit (Pack of 12), D/ASP Series
Asin: B00FX96B3S | Model: D/ASP10P12 | PartNumber: D/ASP10P12 | Ean: 0887861193467 | UPC: 887861193467
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
These Drill Is Ideal For Portable Or Machine Drilling Of Low Tensile Strength Alloy Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- These drill is ideal for portable or machine drilling of low tensile strength alloy materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search