Throw Out Shaft Bushing Kit, Fits Beetle & Ghia 61-70 Bus 61, Compatible with Dune Buggy
Asin: B01C6FN3ZA | Ean: 0707924442397 | UPC: 707924442397
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Empi | Manufacturer: EMPI
Weight: 2.00 Pounds
See On Amazon Similar To Throw Out Shaft Bushing Kit
#1
BST BSSP Billet Aluminum Column Shifter Turn Signal Lever Tilt Lever Flasher Knob Kit Compatible with 1967-1994 Chevy GMC Pontiac Olds Buick, Black Shifter Lever Hazard Tilt Kit for GM Columns
Asin: B0CYSSXX6H | Model: Shifters | PartNumber: Shifters
Specification: Column Shifter: 9"; Turn Signal: 7"; Tilt Lever: 5.5"; Flasher Knob: 3/4".
Easy To Install: 1) Locate The Bottom Of Shifter Lever.; 2) Drive The Rivet Out Slowly. Be Careful There's A Spring, Don't Let It Goes Flying When Removing.; 3) Gently Remove Lever. Get A Pin Out.; 4) Install Back New Lever. Same Way To Replace The Turn Signal And Tilt Lever.
Package: 1 X Shifter Arm;1 X Turn Signal Lever; 1 X Tilt Lever & Flasher Knob.
Material:Billet Aluminum Column Shifter, Tilt Lever, Turn Signal Lever, Hazard Knob Kit. All Levers And Knobs Are Made From Billet Aluminum And, Polished. Shafts Are Made From Stainless Steel And Polished To Match;Deformation Resistance, High Strength, Good Wear Resistance, High Hardness.
Features
- Fitment: for GM Columns 1967 1994 including for Chevy, for Buick, for Oldsmobile, for Pontiac, and for Cadillac cars and trucks; PS: these are aftermarket columns that fit for GM 1967-1994 column standard , do not fit van columns
- Material:Billet aluminum column shifter, tilt lever, turn signal lever, hazard knob kit. All levers and knobs are made from billet aluminum and, polished. Shafts are made from stainless steel and polished to match;Deformation resistance, high strength, good wear resistance, high hardness
- Specification: Column Shifter: 9; Turn Signal: 7; Tilt Lever: 5.5; Flasher Knob: 3/4
- Package: 1 x Shifter Arm;1 x Turn Signal Lever; 1 x Tilt Lever & Flasher Knob
- Easy to install: 1) Locate the bottom of shifter lever.; 2) Drive the rivet out slowly. Be careful there's a spring, don't let it goes flying when removing.; 3) Gently remove lever. Get a pin out.; 4) Install back new lever. Same way to replace the turn signal and tilt lever
- See more on Amazon...
Brand: BST BSSP | Manufacturer: BST BSSP
See On Amazon #2
FreeTec Universal Press and Pull Sleeve Kit Bushing Bearings and Seals Removal Installation Kit
Asin: B07LBLPJ99 | Ean: 0733810493099 | UPC: 733810493099
Contents - 22 X Press Sleeves Inside Diameter From 34-72Mm In 2Mm Steps Outside Diameter From 44-82Mm In 2Mm Steps 4 X Pulling Spindles With Nuts And Thrust Bearings M10. M12. M14. M16..
Supplied In Heavy Duty Moulded Storage Case.
Fully Universal Applications On Both Cars And Lcv.
Features
- 26pc Universal Press and Pull Sleeve Kit For the removal and installation of bushes / bearings and seals etc.
- Fully universal applications on both cars and LCV
- Contents - 22 x Press Sleeves Inside Diameter from 34-72mm in 2mm steps Outside Diameter from 44-82mm in 2mm steps 4 x Pulling Spindles with nuts and thrust bearings M10. M12. M14. M16.
- Supplied in heavy duty moulded storage case
- See more on Amazon...
Brand: FreeTec | Manufacturer: freebirdtrading
Dimensions: 1.77 x 0.98 x 1.38 inches
See On Amazon #3
CLUTCHXPERTS CLUTCH PILOT BEARING COMPATIBLE WITH 1986-1995 SUZUKI SAMURAI SIDEKICK 1.3L
Asin: B09V9N2CMV
Our Clutchxperts Pilot Bushings Are Made Of High Quality Material Which Resists Fatigue Failure..
All The Clutch And Flywheels Are Manufactured In The United States..
All Clutchxperts Pilot Bearings And Bushings Are Manufactured From Iso/Ts 16949 And 14001 Certified Facilities Around The World. Made In Usa And Japan..
The Pilot Bearing/Bushing Supports And Centers The Transmission Input Shaft And Clutch Disc. When The Clutch Is Disengaged, The Pilot Bearing/Bushing Allows The Flywheel To Maintain Engine Rpm While The Input Shaft Is Slowing Down And Stopping..
Features
- ClutchXpert, Inc Founded 1996, Specialized in Clutch kits, Lightweight Racing Flywheels, Master and Slave Cylinders. Come and Check Out Our Clutch and Flywheels and See the Difference From Others. "Price and Quality Always Comes First".
- The pilot bearing/bushing supports and centers the transmission input shaft and clutch disc. When the clutch is disengaged, the pilot bearing/bushing allows the flywheel to maintain engine RPM while the input shaft is slowing down and stopping.
- Our ClutchXperts Pilot Bushings are made of high quality material which resists fatigue failure.
- All ClutchXperts Pilot Bearings and Bushings are manufactured from ISO/TS 16949 and 14001 certified facilities around the world. Made in USA and Japan.
- All the clutch and flywheels are manufactured in the United States.
- See more on Amazon...
Brand: ClutchXperts | Manufacturer: ClutchXperts
See On Amazon #4
HENKYO Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 8 Bushing
Asin: B07JZH94TS | Ean: 0681381708503 | UPC: 681381708503
Brass Bushing Dimensions: Outside Diameter 9.45Mm,Inside Diameter 7.93Mm.
Kit Can Repair Most Carburetors With 5/16" Shafts.
Reamer Size: Knife Edge Diameter 9.4Mm, Knife Shank Diameter 7.9Mm.
Features
- Kit includes: 8 pcs Made of solid brass Processing bushings and one carbon steel reverse-cut piloted reamer
- Reamer size: knife edge diameter 9.4mm, Knife Shank diameter 7.9mm
- Brass Bushing Dimensions: Outside diameter 9.45mm,Inside diameter 7.93mm
- kit can repair most carburetors with 5/16 shafts
- See more on Amazon...
Brand: HENKYO | Manufacturer: HENKYO
See On Amazon #5
HENKYO Throttle Shaft Bushing Repair kit Repair 3/8 Shaft Worn Carburetor 1 Reamer 8 Bushing
Asin: B07JZMPFVP | Ean: 0681381708527 | UPC: 681381708527
Reamer Size: Knife Edge Diameter 10.9Mm, Knife Handle Diameter 9.5Mm.
Solid Brass Cnc Machining.
Brass Bushing Dimensions: Outside Diameter 10.95Mm Inside Diameter 9.52Mm.
Kit Includes: 8 Pcs Made Of Solid Brass Processing Bushings And One Carbon Steel Reverse-Cut Piloted Reamer.
Features
- Please check if the size of the Throttle Shaft matches the product before purchase!
- Kit includes: 8 pcs Made of solid brass Processing bushings and one carbon steel reverse-cut piloted reamer
- Reamer size: knife edge diameter 10.9mm, Knife handle diameter 9.5mm
- Brass Bushing Dimensions: Outside diameter 10.95mm Inside diameter 9.52mm
- solid brass CNC machining
- See more on Amazon...
Brand: HENKYO | Manufacturer: HENKYO
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon #6
Hd Throw Out Bearing Shaft, Fits Beetle 61-70, Bus 70-72, Compatible with Dune Buggy
Asin: B01HH31PAG | Ean: 0707924442359 | UPC: 707924442359
Brand: EMPI | Manufacturer: EMPI
Weight: 1.00 Pounds
See On Amazon #7
PerTronix D8001 Flame-Thrower Red Cap GM HEI Tune Up Kit for Chevrolet/Cadillac
Asin: B000JUZK1K | Model: D8001 | PartNumber: D8001 | Ean: 0694342006426 | UPC: 694342006426
Wire Harness And Capacitor, And Complete Installation Hardware.
Race Only Tune-Up Kits Include Matching Coil And Module, Wiring Harness, Vacuum Lock Out, Advance Weights, Springs, Bushings, Cap, Rotor, Dust Shield, And Necessary Hardware.
Custom Flame-Thrower Coil Cover, Adjustable Vacuum Advance Canister, Hi-Performance Advance Kit.
Features
- Kits include street-strip 4-pin module and coil combination
- Custom Flame-Thrower coil cover, adjustable vacuum advance canister, hi-performance advance kit
- Wire harness and capacitor, and complete installation hardware
- Race Only tune-up kits include matching coil and module, wiring harness, vacuum lock out, advance weights, springs, bushings, cap, rotor, dust shield, and necessary hardware
- See more on Amazon...
First Available: 09/15/2006
Brand: Pertronix | Manufacturer: Pertronix
Dimensions: 6.60 x 8.20 x 8.30 inches | Weight: 3.70 Pounds
See On Amazon #8
Throw Out Shaft Bushing Kit, Fits Beetle & Ghia 61-71 Bus 61, Compatible with Dune Buggy
Asin: B003LIUV3O | Ean: 0707924369625 | UPC: 707924369625
Solid Bronze Bushings.
Brand: EMPI | Manufacturer: EMPI
Weight: 0.00 Pounds
See On Amazon #9
HENKYO Throttle Shaft Bushing Repair kit Repair 5/16 Shaft Worn Carburetor 1 Reamer 16 Bushing
Asin: B07JZ8BXP3 | Ean: 0681381708510 | UPC: 681381708510
Brass Bushing Dimensions: Outside Diameter 9.45Mm,Inside Diameter 7.93Mm.
Kit Can Repair Most Carburetors With 5/16" Shafts.
Reamer Size: Knife Edge Diameter 9.4Mm, Knife Shank Diameter 7.9Mm.
Features
- Kit includes: 16 pcs Made of solid brass Processing bushings and one carbon steel reverse-cut piloted reamer
- Reamer size: knife edge diameter 9.4mm, Knife Shank diameter 7.9mm
- Brass Bushing Dimensions: Outside diameter 9.45mm,Inside diameter 7.93mm
- kit can repair most carburetors with 5/16 shafts
- See more on Amazon...
Brand: HENKYO | Manufacturer: HENKYO
See On Amazon
Looking For Something Else?
Search