Rockler Cabinet Drawer Installation Clamps Right, Left-Side Drawer, Cabinet Installation Tools Steel, Plastic Drawer Front Clamps - Front Drawer Woodworking Clamps for Easy, Fast Installation
Asin: B01D4U320C | Model: 54804 | PartNumber: 54804 | Ean: 0733175548045 | UPC: 733175548045
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.No Time Flat: The Thin Frame Profile Allows You To Close The Drawer While The Heavy Duty Clamps Are Still On, Making It Easy To Check Your Alignment With The Adjoining Drawer Face Clamp. Once The Micro-Adjusters Are Set, You Can Work Your Way Through A Stack Of Drawers In No Time..
Perfect Handy Tool: These Cabinet Clamps For Installing Cabinets Are The Perfect Hand Tools For A Carpenter Or Cabinet Maker. Our Drawer Installation Clamps Will Save A Lot Of Time And Give Flawless Results For Professional Drawer Or Cabinet Installation..
Easy To Use: Clamp The Drawer Front In Position And Use Our Adjustment Screws (Sold Separately) To Fasten It In Place. This Drawer Install Tool Is Available In Both Left/Right Pairs. Only Light Clamping Pressure Is Necessary..
Get Perfect Alignment: Securing Drawer Fronts To Their Drawer Boxes Can Be A Challenge, But It's A Challenge These Drawer Clamps Are More Than Up For. With Their Dual Clamp Heads And Micro-Adjustable Stops, Our Drawer Front Installation Clamps Make Getting Perfect Alignment A Cinch..
Features
- Drawer Front Install Tool: Our handy clamps hold the drawer fronts firmly in position on the drawer box while you drive the screws. Use the rockler drawer front clamp tool for an easy and fast installation process of drawers or cabinets.
- Get Perfect Alignment: Securing drawer fronts to their drawer boxes can be a challenge, but it's a challenge these drawer clamps are more than up for. With their dual clamp heads and micro-adjustable stops, our drawer front installation clamps make getting perfect alignment a cinch.
- No Time Flat: The thin frame profile allows you to close the drawer while the heavy duty clamps are still on, making it easy to check your alignment with the adjoining drawer face clamp. Once the micro-adjusters are set, you can work your way through a stack of drawers in no time.
- Easy To Use: Clamp the drawer front in position and use our adjustment screws (sold separately) to fasten it in place. This drawer install tool is available in both left/right pairs. Only light clamping pressure is necessary.
- Perfect Handy Tool: These cabinet clamps for installing cabinets are the perfect hand tools for a carpenter or cabinet maker. Our drawer installation clamps will save a lot of time and give flawless results for professional drawer or cabinet installation.
- See more on Amazon...
Brand: ROCKLER | Manufacturer: Rockler
Dimensions: 1.50 x 9.49 x 7.01 inches | Weight: 1.37 Pounds
See On Amazon Similar To Rockler Cabinet Drawer Installation Clamps
#1
Kreg KMA3225 Shelf-Pin Jig 1/4" (6 mm) - Shelf Pin Drilling Jig - Create Perfect Holes for Wobble-Free Shelves - Drill Guide for Straight Holes
Asin: B09V8BN6W9 | Model: KMA3225 | PartNumber: KMA3225 | Ean: 0647096810993 | UPC: 647096810993
Accessible Carpentry Tool: Drill Guide Has A 32 Mm System To Accurately Place Shelf Pin Holes For Hinges And Drawer Slides.
Premium Kreg Tools: We Offer Products That Help Woodworkers Close The Gap Between Idea And Outcome.
Versatile Hardware Jig: Connect A Second Shelf-Pin Jig For Larger Spaces; Kit Includes A Shelf-Pin Jig, 1/4-Inch Drill Bit, Stop Collar, And Sample Pack Of 1/4-Inch Shelf Pins.
Sturdy Woodworking Tools: The 6 Included Hardened-Steel Drill Guides Help You Make Clean, Precise Holes.
Features
- Premium Home Improvement Tools: Drill guide can create 6 perfectly straight holes at 1 1/4 inch increments to build wobble-free shelves
- Sturdy Woodworking Tools: The 6 included hardened-steel drill guides help you make clean, precise holes
- Accessible Carpentry Tool: Drill guide has a 32 mm system to accurately place shelf pin holes for hinges and drawer slides
- Versatile Hardware Jig: Connect a second shelf-pin jig for larger spaces; kit includes a shelf-pin jig, 1/4-inch drill bit, stop collar, and sample pack of 1/4-inch shelf pins
- Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
- See more on Amazon...
Brand: KREG | Manufacturer: Kreg Tool Inc
Dimensions: 4.50 x 0.75 x 2.00 inches | Weight: 0.10 Pounds
See On Amazon #2
Liberty D688SEC-W-TX Face-Frame Socket Set for Bottom Mount Drawer Slides, White
Asin: B0086DUNCS | Model: D688SEC-W-TX | PartNumber: D688SEC-W-TX | Ean: 0022788795879 | UPC: 022788795879
Mounts To The Back Of The Cabinet, Includes Both Right And Left Sockets & Mounting Hardware.
White Finish.
Use To Install European Drawer Slides To Face Frame Cabinets.
The Slide System Includes Left And Right Slides, Along With The Mounting Hardware.
Features
- 100-Pound load capacity
- The slide system includes left and right slides, along with the mounting hardware
- Mounts to the back of the cabinet, Includes both right and left sockets & mounting hardware
- Use to install European drawer slides to face frame cabinets
- White finish
- See more on Amazon...
Brand: Liberty | Manufacturer: Liberty Hardware
Dimensions: 1.20 x 2.52 x 2.95 inches | Weight: 0.09 Pounds
See On Amazon #3
Kreg KHI-Slide Drawer Slide Jig - Drawer Slide Jig Kit - Drawer Slide Tool - for Cabinets, Drawers, Desks & More - Easily Install Drawer Slides - Set of 2
Asin: B01L2T0IDQ | Model: KHI-SLIDE | PartNumber: KHI-SLIDE | Ean: 0735090165024, 0647096806644, 5024763174193, 0647096807337 | UPC: 647096806644, 735090165024, 647096807337
Works With Many Drawer Slides: Drawer Jig Aligns Undermount, Ball-Bearing, And Epoxy-Coating Slides.
Premium Kreg Tools: We Offer Products That Help Woodworkers Close The Gap Between Idea And Outcome.
Multipurpose Carpenter Tools: Works For Cabinets, Cases, Drawers, Desks, And More.
Eliminate Measuring: Kreg Jig Has Built-In Indexing Tabs To Precisely Align Drawer Slides And Drawers Without Measuring.
Features
- Premium Home Improvement Tool: Take the guesswork out of drawers with the Drawer Slide Jig; easily create level drawers that slide smoothly
- Eliminate Measuring: Kreg jig has built-in indexing tabs to precisely align drawer slides and drawers without measuring
- Works with Many Drawer Slides: Drawer jig aligns undermount, ball-bearing, and epoxy-coating slides
- Multipurpose Carpenter Tools: Works for cabinets, cases, drawers, desks, and more
- Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
- See more on Amazon...
First Available: 05/29/2017
Brand: KREG | Manufacturer: Kreg Tool Inc
Dimensions: 4.00 x 16.00 x 5.75 inches | Weight: 1.15 Pounds
Warranty: EME4802772
See On Amazon #4
Cabinet Clamps 2 Pack - Protective Case Included - Claw Clamps for Cabinets, Cabinet Face Frame Clamps
Asin: B0BJQPMXZF | Model: cabinet clamps | PartNumber: cabinet clamps | Ean: 0850009189585 | UPC: 850009189585
𝐃𝐫𝐢𝐥𝐥 𝐆𝐮𝐢𝐝𝐞 - Equipped With A Pilot-Hole Drill Guide For More Precise Pre-Drilling, Which Can Be Flipped Out Of The Way To Drive In The Screw After The Pilot Hole Has Been Drilled..
𝐒𝐩𝐞𝐜𝐢𝐟𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬 - The Clamps Are Designed To Work On Stiles Up To 1-1/4 In. Thick; They Have A 4" Clamp Capacity, A 2" Jaw, And A Clamping Force Of 300-600 Lbs.
𝐂𝐚𝐬𝐞 & 𝐅𝐞𝐥𝐭 𝐏𝐚𝐝𝐬 - The Accompanying Felt Pads For Clamp Faces And Alignment Plate Will Protect And Cushion The Points Of Contact With Your Cabinet..
𝐏𝐫𝐚𝐜𝐭𝐢𝐜𝐚𝐥𝐢𝐭𝐲 - Manram Cabinet Clamps Integrate Several Processes Of Installing Face Frame Cabinets Into Just One Straightforward Operation..
Features
- - Manram Cabinet Clamps are high-quality, long-lasting clamps that come ready to tighten, align, pre-drill, and secure your cabinet stile, all without changing clamp positions or taking it off. It comes with two (2) high performance face frame clamps, protective case, and felt pads.
- - Manram Cabinet Clamps integrate several processes of installing face frame cabinets into just one straightforward operation.
- - Equipped with a pilot-hole drill guide for more precise pre-drilling, which can be flipped out of the way to drive in the screw after the pilot hole has been drilled.
- & - The accompanying felt pads for clamp faces and alignment plate will protect and cushion the points of contact with your cabinet.
- - The clamps are designed to work on stiles up to 1-1/4 in. thick; they have a 4 clamp capacity, a 2 jaw, and a clamping force of 300-600 lbs
- See more on Amazon...
Brand: manram | Manufacturer: Manram
See On Amazon #5
Cabinet Clamps, Cabinet Installation Clamps Cabinetry Clamps Cabinet Face Frame Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Red
Asin: B0B9S973BQ | Model: 085-MDaKQi-R | PartNumber: 085-MDaKQi-R
【Accurate & Efficient Drill Holes.】The Built-In Drill Guide Will Automatically Help Us Lock The Position To Pre-Drill And Drill The Pilot Hole More Accurately And Effectively. Note: Be Sure That The Drill Guide Is In The Locked Position Before Drilling. Cannot Be Used On Cabinets Without The Lip Or Flush..
【Widely Applications.】This Cabinetry Clamp Could Definitely Does Its Job For All Types Of Cabinets Even You Are Not A Professional Installer. It Holds The Faces Together And Allows You To Get Them Level And Plumb And Even Has A Drill Guide To Assist You In Drilling Pilot Holes For Your Cabinet-To-Cabinet Fasteners..
【Easy To Use.】These Cabinetry Clamps Set Is Consistent, Time-Saving And Left No Damage To Align The Face Frames Of Both Cabinets More Easier And Faster. Note: Please Remember To Stick The Adhesive Pads Correctly To The Alignment Plate And Secondary Arms To Avoid Leaving Marks On The Faces Of The Cabinets..
【Rust-Proof & Sturdy Steel.】Made Of Primary Steel And With Steel Sliding T-Bars And An Aluminum Alignment Plate, The Cabinet Clamp’S Body And The Side Jaw Are Cast Steel For Long-Term Durability And Tightness. And Its Center Aluminum Alignment Plates Allow The Clamps To Align The Two Cabinet’S Face Frames Together From Front To Back..
Features
- Professional Specification. The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity; Minimum Jaw Width: 2.95 Inch; Maximum Jaw Width: 5.3 Inch; Alignment Plate Depth: 1.25 to 1.5 Inch; Drill bit: 1/8 ; Drill hole: 1/4 . It comes with 3 felt pads for the clamp faces and alignment plate to avoid leaving marks on your cabinets.
- Rust-proof & Sturdy Steel. Made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamp s body and the side jaw are cast steel for long-term durability and tightness. And its center aluminum alignment plates allow the clamps to align the two cabinet s face frames together from front to back.
- Accurate & Efficient Drill Holes. The built-in drill guide will automatically help us lock the position to pre-drill and drill the pilot hole more accurately and effectively. Note: Be sure that the drill guide is in the locked position before drilling. Cannot be used on cabinets without the lip or flush.
- Easy to Use. These cabinetry clamps set is consistent, time-saving and left no damage to align the face frames of both cabinets more easier and faster. Note: Please remember to stick the adhesive pads correctly to the alignment plate and secondary arms to avoid leaving marks on the faces of the cabinets.
- Widely Applications. This cabinetry clamp could definitely does its job for all types of cabinets even you are not a professional installer. It holds the faces together and allows you to get them level and plumb and even has a drill guide to assist you in drilling pilot holes for your cabinet-to-cabinet fasteners.
- See more on Amazon...
Brand: Sebupar | Manufacturer: Sebupar
See On Amazon #6
Bessey BES8511 Face Frame Clamp Pair
Asin: B073RR4JPF | Model: BES8511x2-1 | PartNumber: BES8511x2-1 | Ean: 0725703608154 | UPC: 725703608154
Equipped With Pilot-Hole Drill Guide That Can Be Flipped Out Of The Way To Drive In The Screw Once The Pilot Hole Is Drilled..
Comes With Non-Marring Felt Pads For Clamp Faces And Alignment Plate To Protect And Cushion The Points Of Contact On Your Cabinet..
Clamp Specifications: Works On Stiles Up To 1-1/4 In. Thick; 4" Clamp Capacity; 2" Jaw; Clamping Force Of 300 - 600 Lbs..
Tighten, Align, Pre-Drill And Fasten Your Cabinet Stile, All Without Having To Re-Position Or Remove Your Clamp!.
Features
- Includes two (2) BES8511 Face Frame Cabinetry Clamps
- Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!
- Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.
- Clamp specifications: works on stiles up to 1-1/4 in. thick; 4 clamp capacity; 2 jaw; clamping force of 300 - 600 lbs.
- Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet.
- See more on Amazon...
Brand: Bessey | Manufacturer: Bessey
Dimensions: 3.00 x 10.00 x 6.00 Inches | Weight: 2.00 pounds
See On Amazon #7
PONY 4-Pack Cabinet Clamps, 8510 Cabinet Claw, Face Frame Clamps for Installing Cabinets, 440 lbs Load Limited Orange
Asin: B09XM2BC5V | Model: 8510 | PartNumber: 8510
【Pilot-Hole Drill】 There Is A Pilot-Hole Drilling Guide On One End. The Guide Flips Out Of The Way So You Can Drive Screws To Connect The Cabinets Without Removing Or Repositioning The Clamp..
【Professional】Professional, Quality Installation Is Achieved At A Fraction Of The Time Compared To The Use Of More Conventional Clamps..
【Protection Pads】 Comes With 4 Sets Of Protective Rubber Pads To Cushion And Protect Cabinetry. Face Frame Stiles Can Be Tightened, Aligned, Pre-Drilled And Fastened While The Clamp Remains In Its Original Position..
【Dimensions】 Works On Stiles From 1-1/2 Inch To 2 Inch; Throat Depth: 1-1/2 Inch; Minimum Opening: 2 Inch; Maximum Opening Capacity: 4-3/8 Inch; Jaw Width: 2 Inch; Jaw Width: 2-7/16 Inch. Max Load Capacity: 440 Lbs..
Features
- PONY 8510 Cabinet Claw Complete your cabinetry projects in a fraction of the time with Pony cabinet claw. This unique and patented tool combines the various steps of face-frame cabinet installation into one easy process.
- Dimensions Works on stiles from 1-1/2 inch to 2 inch; Throat Depth: 1-1/2 inch; Minimum Opening: 2 inch; Maximum Opening Capacity: 4-3/8 inch; Jaw Width: 2 Inch; Jaw Width: 2-7/16 inch. Max load capacity: 440 lbs.
- Pilot-Hole Drill There is a pilot-hole drilling guide on one end. The guide flips out of the way so you can drive screws to connect the cabinets without removing or repositioning the clamp.
- Protection Pads Comes with 4 sets of protective rubber pads to cushion and protect cabinetry. Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position.
- Professional Professional, quality installation is achieved at a fraction of the time compared to the use of more conventional clamps.
- See more on Amazon...
Brand: PONY | Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD
See On Amazon #8
120 Pcs Drawer Wedges with Screws, Drawer Bottom Support Brackets, Fixing Mending Wedges, Plastic Angle Code Bracket Fasteners, Drawer Reinforcement Repair Kit for Furniture Sagging Drawer
Asin: B0C4VB1CL4 | Model: 1 | PartNumber: 1
Easy To Install: Just Manually Insert The Plastic Drawer Wedge Into The Crease Of The Back Panel Or Corner Of The Drawer And Screw It Into The Corner Cabinet. With These Small Wedges, The Sagging Drawer Compartment Can Be Stabilized Again..
Package Included: You Will Receive 120 Pcs Drawer Wedges With M3.5 X 16 Mm Metal Self-Tapping Screws, Sufficient Quantity Of Repair Fixing Patch Wedges Can Well Meet Your Drawer Repair Needs Or Home Furniture Fixing Repair Needs..
Wide Applications: These Wedges Are Suitable For All Kinds Of Furniture, Bookcase, Drawer, Cabinet, Wardrobe, Etc., To Quickly And Easily Eliminate The Sagging Of The Drawer Bottom..
L-Shaped Stable Design: The Corner Clips On The Back Of The Drawer Repair Kit Brackets Are L-Shaped Designed And Are Used To Reinforce Right-Angle Corner Joints To Hold Furniture Securely In Place..
Features
- Premium Material: The drawer bottom supports are made of strong plastic, and the screws are made of superb stainless steel material with good toughness and strength, which will not deform or break, and are sturdy and durable for long time use.
- L-shaped Stable Design: The corner clips on the back of the drawer repair kit brackets are L-shaped designed and are used to reinforce right-angle corner joints to hold furniture securely in place.
- Easy to Install: Just manually insert the plastic drawer wedge into the crease of the back panel or corner of the drawer and screw it into the corner cabinet. With these small wedges, the sagging drawer compartment can be stabilized again.
- Wide Applications: These wedges are suitable for all kinds of furniture, bookcase, drawer, cabinet, wardrobe, etc., to quickly and easily eliminate the sagging of the drawer bottom.
- Package Included: You will receive 120 pcs drawer wedges with M3.5 x 16 mm metal self-tapping screws, sufficient quantity of repair fixing patch wedges can well meet your drawer repair needs or home furniture fixing repair needs.
- See more on Amazon...
Brand: Siyurongg | Manufacturer: Siyurongmy
Dimensions: 0.35 x 0.59 x 0.51 inches
See On Amazon #9
POWERTEC 71181 Drawer Front Installation Clamps | Cabinet Hardware Jig | Drawer Jig For Easy and Fast Drawer Front Panel Installation
Asin: B07SDPWX6W | Model: 71181 | PartNumber: 71181 | Ean: 0843441101659 | UPC: 843441101659
Versatile Use: Accommodates To Different Sizes Of Drawer-Face/Stock Thicknesses..
Consistent Results: Saves Time And Hassle And Promises Uniform And Flawless Results - Time And Time Again For Beautiful Drawer Face Installations.
Convenient Features: Drawer Face Clamps Can Be In Operation Even When The Drawer Is Closed.
Function: Drawer Front Installation Clamps Make For The Easy And Accurate Installation Of Perfectly Aligned Front Drawer Panels - A Pair Of Extra Expert Hands To Guide You Through The Task Quickly And Accurately.
Features
- INCLUDES/ EASY TO USE & ADJUST: Includes 2 Drawer Front Installation Clamps; Micro-adjusting screws allow for essential fine-tuning of front panel placement
- FUNCTION: Drawer Front Installation Clamps Make for the easy and accurate installation of perfectly aligned front drawer panels - a pair of extra expert hands to guide you through the task quickly and accurately
- VERSATILE USE: Accommodates to different sizes of drawer-face/stock thicknesses.
- CONVENIENT FEATURES: Drawer face Clamps can be in operation even when the drawer is closed
- CONSISTENT RESULTS: Saves time and hassle and promises uniform and flawless results - time and time again for beautiful drawer face installations
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 2.50 x 6.00 x 5.00 Inches | Weight: 1.19 Pounds
See On Amazon #10
Milescraft 1341 Drawer Jig Reversible Drawer Slide Jig for Drawer Installation Easy-Align Tabs, Fences, and Level Position the Jigs for Accurate Support. Non-Marring Rubber to Protect Cabinets
Asin: B09TLCNJBW | Model: 1341 | PartNumber: 1341 | Ean: 0737888134106 | UPC: 737888134106
Reverse The Drawerjig And Face Outwards To Support And Align Drawer While Attaching Slides.
There Are 8 Anti-Marring Pads On Both Sides Of Each Jig To Reduce Movement And Protect Cabinets.
Built-In Level Helps Indicate If Your Cabinets Have Been Installed Accurate And True.
Large Clamping Area Allows For Tight And Secure Clamping To Cabinet.
Features
- Alignment fences and tabs make sure your jig is accurately aligned on both framed and frameless cabinets
- Large clamping area allows for tight and secure clamping to cabinet
- Reverse the DrawerJig and face outwards to support and align drawer while attaching slides
- Built-in level helps indicate if your cabinets have been installed accurate and true
- There are 8 anti-marring pads on both sides of each jig to reduce movement and protect cabinets
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft
Dimensions: 3.94 x 3.94 x 0.79 inches
Warranty: 3 year
See On Amazon
Looking For Something Else?
Search