HEATIT HIRD 200 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable
Asin: B01HM3BE8E | Model: 6947881598780 | PartNumber: 6947881598780 | Ean: 6947881598780
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Designed To Prevent Ice Build Up, Known As Ice Dams, From Forming On Roofs And In Gutters And Downspouts. Protect Your Roof From Damage And Leaking, Keep The Water Flowing In Gutter & Downspouts..
Testing The Cable Before The Installation.Uncoil The Heat Cable Completely So It Does Not Touch, Cross Over Or Overlap On Itself. Do Not Plug In The Cable Until It Has Been Completely Uncoiled. Plug Cable In, And In Approximately 5 Minutes, You Should Feel Slightly Warm To The Touch. Then Unplug The Cable..
Used For Metal Or Plastic Gutters/Downspouts, Inclined Roofs Roofs With Noncombustible Shingles (Ex.: Asphalt Shingles) That Meet National Building Codes. Different Lengths Are Available; Suitable For Most Roof And Gutter Configurations..
6 Ft 18/3 Cold Lead With Plug . Pre-Assembled, Ready To Install, No Maintenance Required. Easy Instruction Manual, Clips And Spacers Are Included. Tough Xlpe As Inner Insulation And Weather Resistant Pvc (High-Low Temperature) As Out Jacket. 100% Screen Rate With The Aluminum Foil And Tinned Copper Braid. More Safe And More Healthy..
Features
- CSA and ETL Certified for Peace of Mind: Our HIRD Roof Deicing Cable proudly carries CSA and ETL certifications, emblematic of superior quality and safety. Rest assured, these certifications affirm that our cable meets the most stringent industry benchmarks for both performance and safety. Count on our roof deicing cable to provide exceptional protection against snow and ice buildup, without compromise. Make the smart choice for quality and safety choose a product that excels in every aspect.
- 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy.
- Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available; Suitable for most roof and gutter configurations.
- Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
Weight: 0.90 Pounds
See On Amazon Similar To HEATIT HIRD 200 feet 5
#1
TOPDURE 200ft Roof Heat Cable with 5w/ft, CSA ETL Certified, Ideal for Metal or Plastic Gutters, Prevents Ice Buildup and Damage, 120V
Asin: B08Y8SHTH8 | Ean: 0791809747967 | UPC: 791809747967
[Csa And Etl Certified] Our Roof Heating Cable Ensures Top-Notch Quality And Safety. Trust In Our Certified Cable To Effectively Prevent Snow And Ice Buildup, Offering Peace Of Mind For Your Home..
[Easy To Install] Uncoil The Roof Heat Cable And Route It Using Cable Clips And Spacers On Your Shingle Roof, Around Dormers, Near Skylights, Or In Your Gutters And Downspouts. Our Product Is Available In Lengths Ranging From 20Ft To 240Ft To Accommodate Your Specific Requirements..
[Specifications] Each Cable, With A Power Output Of 5 W/Ft, Includes A 6 Ft 18/3 Cold Lead With Plug For Easy Setup. Clips And Spacers Are Provided For Convenience. Built Tough With Xlpe Inner Insulation And Weather-Resistant Pvc Outer Jacket, It Guarantees Optimal Performance With A 100% Screen Rate Featuring Aluminum Foil And Tinned Copper Braid..
[Scene Use] Ideal For Use With Metal Or Plastic Gutters/Downspouts, Inclined Roofs, And Roofs Equipped With Noncombustible Shingles (E.G., Asphalt Shingles) Meeting National Building Codes. With Different Lengths Available, It Suits Most Roof And Gutter Setups With Ease..
Features
- [Snow-melting and Ice Dam Prevention] Engineered to thwart the development of ice dams on roofs, gutters, and downspouts, our solution shields your roof from potential damage and leakage, ensuring continuous water flow in gutters and downspouts.
- [Scene Use] Ideal for use with metal or plastic gutters/downspouts, inclined roofs, and roofs equipped with noncombustible shingles (e.g., asphalt shingles) meeting national building codes. With different lengths available, it suits most roof and gutter setups with ease.
- [CSA and ETL Certified] our roof heating cable ensures top-notch quality and safety. Trust in our certified cable to effectively prevent snow and ice buildup, offering peace of mind for your home.
- [Specifications] Each cable, with a power output of 5 w/ft, includes a 6 ft 18/3 cold lead with plug for easy setup. Clips and spacers are provided for convenience. Built tough with XLPE inner insulation and weather-resistant PVC outer jacket, it guarantees optimal performance with a 100% screen rate featuring aluminum foil and tinned copper braid.
- [Easy To Install] Uncoil the roof heat cable and route it using cable clips and spacers on your shingle roof, around dormers, near skylights, or in your gutters and downspouts. Our product is available in lengths ranging from 20ft to 240ft to accommodate your specific requirements.
- See more on Amazon...
Brand: TOPDURE | Manufacturer: TOPDURE
Weight: 8.32 pounds
See On Amazon #2
HEATIT Mobile Home 500-feet HEATIT HTM Braid Self Regulating heating cable Water Line Freeze Protection & 5* Connection kit
Asin: B0C9QDTHMB
Additional Tools Which You May Need: High Quality Electrician’S Tape Such As Heatit Glass Cloth Tape, 1/2” Thick Fiberglass Insulation With Vapor Seal, Wire Cutters Or Heavy Scissors, Slotted Screw Drivers, Ruler Or Measuring Tape..
Quick Test: Once Insulation Is Finished, Plug The Cable Into A 120V Ac Outlet. Don’T Use Any Of The Water For About 1 Hour. After That Turn On The Tap On Heatit Htm Protected Pipe And Test The Water Temperature. You Should Feel The Slight Warm From The Water..
Heatit Htm Connection Kit Is Necessary For The Pipe Freeze Protection Application. The Htm Kit Includes 1*500Ft Htm Cable, 5* Connection Kit..
Tinned Copper Braid As The Out Jacket As Well As Electrical Ground. Self Regulating Heating Cable Just Deliver The Heat Where Is Need. The Cable Output Will Adjust Automatically Based On The Ambient Temperature At Each Point Along The Cable. No Worry About Overheat Risk. More Safe. Can Be Used By Straight, Spiral And Overlap. More Functional..
Features
- HTM self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
- Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Additional tools which you may need: High quality electrician s tape such as HEATIT glass cloth tape, 1/2 thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, slotted screw drivers, Ruler or measuring tape.
- HEATIT HTM connection kit is necessary for the pipe freeze protection application. The HTM Kit includes 1*500ft HTM cable, 5* Connection kit.
- Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
See On Amazon #3
HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 150-feet 120V Roof deicing and Pipe freeze Protection
Asin: B07QYQHM3Z | Model: 150-feet | PartNumber: 150-feet | Ean: 6947881508239
Protect Pipes Up To 2 1/2” In Diameter. For Better Freeze Protection, At Least 1/2 Inch Thick Or Thicker Insulation Material Is Recommended, Especially For Extremely Cold Weather. If The Ambient Temperature Is Lower Than -20°F(-29°C), Please Use 1” Thick Insulation Material. Etl Approved. 50 Degrees F For Pipe Freeze Protection.3 Ft 18/3 Cold Lead With Grounded Plug..
Designed To Maintain Water Temperature In The Supply Piping System, Reducing Or Eliminating The Delay In Obtaining Hot Water At Each Fixture. You Don’T Need To Run Showers Or Sinks For Long Periods Of Time To Draw New Hot Water Into The Unit, Which Is A Significant Waste Of Water. Simply Wrap The Self-Regulating Heating Cable Around Your Hot Water Lines Within The House To Provide You With Instant Hot Water. It Is An Energy-Efficient And Economical Alternative To Common Re-Circulation Systems..
Roof Deicing Application: Heatit Jhsf1 Was Designed To Prevent The Ice Dam Formation Not To Melt The Ice Dams Which Were Already Formed. Please Turn On The Cable At The Beginning Of Snowing. Can Be Used On Flat Roofs, Metal Roofs, Asphalt Roofs, Rubber Roofs, Slate Roofs, Stone Roofs, Metal Roofs, Ceramic Roofs, Composite (Tar And Gravel) Roofs, And So On. Rated 10W/Ft At 32°F (0°C) For Roof Deicing. For Roof Deicing Applications, You May Need To Buy Clips And Hangers Separately..
Suitable For Use On Plastic And Metal Water Pipes( Including Inlet Pipes, Drain Pipes, Sewer, Palm Tree Frost Protection Etc). Industrial Grade Self-Regulating Heating Cable. The Cable Output Will Adjust Automatically Based On The Ambient Temperature At Each Point Along The Cable. No Worry About The Overheating Risk. More Safe. Can Be Used By Straight, Spiral, And Overlap. More Functional..
Features
- ETL Certified for Safety: Our Self-Regulating Heating Cable comes with ETL certification, a mark of quality and safety. ETL certification guarantees that the water line heat tape meets the highest industry standards for performance and safety. You can trust in the reliability of our pipe heat cables to deliver exceptional freeze protection for your water pipes. Don't compromise on quality and safety invest in a product that delivers top-notch performance in every aspect.
- Suitable for use on plastic and metal water pipes( including inlet pipes, drain pipes, sewer, palm tree frost protection etc). Industrial grade self-regulating heating cable. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheating risk. More Safe. Can be used by straight, spiral, and overlap. More functional.
- Protect pipes up to 2 1/2 in diameter. For better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20 F(-29 C), please use 1 thick insulation material. ETL approved. 50 degrees F for pipe freeze protection.3 ft 18/3 cold lead with grounded plug.
- Roof deicing application: HEATIT JHSF1 was designed to prevent the ice dam formation not to melt the ice dams which were already formed. Please turn on the cable at the beginning of snowing. Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs, and so on. Rated 10W/ft at 32 F (0 C) for roof deicing. For roof deicing applications, you may need to buy clips and hangers separately.
- Designed to maintain water temperature in the supply piping system, reducing or eliminating the delay in obtaining hot water at each fixture. You don t need to run showers or sinks for long periods of time to draw new hot water into the unit, which is a significant waste of water. Simply wrap the self-regulating heating cable around your hot water lines within the house to provide you with instant hot water. It is an energy-efficient and economical alternative to common re-circulation systems.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
Weight: 2.60 Pounds
See On Amazon #4
HEATIT HISF 250-feet 240V Self Regulating Heating Cable, Dry,Industrial Grade
Asin: B08RBKFCVJ
Use On Dry Location, Can Be Used By Straight, Spiral And Overlap Type, Which Suitable For The Pipe Outer Dia. Also Prohibit On Over Bending For The Cable, And Bending Radius Not Lower Than 5 Times Dia Of Cable..
Only Includes Cable. Please Kindly Leave Your Message Or Consult With Us If You Have Any Concern..
Includes: Cable, Power Termination Kits (Jsr00*2), Splice And Tee Connection Kit (Jsr10), Glass Cloth Tape (Jsr03) ..
Standards:Ul515, Ul1588, Iec/Ieee 515, Iec/Ieee 515.1 And Can/Csa-C22.2 No.130.03.
Features
- Suitable for freeze protection of liquid inside the plastic and metal pipe. (including inlet pipe, drain pipe, sewer, palm tree, etc), and smoothly adjust the output at each point along the cable according to ambient temperature of installation area.
- Standards:UL515, UL1588, IEC/IEEE 515, IEC/IEEE 515.1 and CAN/CSA-c22.2 No.130.03
- Use on dry location, can be used by straight, spiral and overlap type, which suitable for the pipe outer Dia. Also prohibit on over bending for the cable, and bending radius not lower than 5 times Dia of cable.
- Includes: Cable, Power termination kits (JSR00*2), Splice and Tee connection Kit (JSR10), Glass cloth tape (JSR03) .
- Only includes cable. Please kindly leave your message or consult with us if you have any concern.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
See On Amazon #5
HEATIT HIRD 200 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable & Downspout Hanger
Asin: B0CSSRKMYX
Designed To Prevent Ice Build Up, Known As Ice Dams, From Forming On Roofs And In Gutters And Downspouts. Protect Your Roof From Damage And Leaking, Keep The Water Flowing In Gutter & Downspouts..
Testing The Cable Before The Installation.Uncoil The Heat Cable Completely So It Does Not Touch, Cross Over Or Overlap On Itself. Do Not Plug In The Cable Until It Has Been Completely Uncoiled. Plug Cable In, And In Approximately 5 Minutes, You Should Feel Slightly Warm To The Touch. Then Unplug The Cable..
Used For Metal Or Plastic Gutters/Downspouts, Inclined Roofs Roofs With Noncombustible Shingles (Ex.: Asphalt Shingles) That Meet National Building Codes. Different Lengths Are Available; Suitable For Most Roof And Gutter Configurations..
6 Ft 18/3 Cold Lead With Plug . Pre-Assembled, Ready To Install, No Maintenance Required. Easy Instruction Manual, Clips And Spacers Are Included. Tough Xlpe As Inner Insulation And Weather Resistant Pvc (High-Low Temperature) As Out Jacket. 100% Screen Rate With The Aluminum Foil And Tinned Copper Braid. More Safe And More Healthy..
Features
- CSA and ETL Certified for Peace of Mind: Our HIRD Roof Deicing Cable proudly carries CSA and ETL certifications, emblematic of superior quality and safety. Rest assured, these certifications affirm that our cable meets the most stringent industry benchmarks for both performance and safety. Count on our roof deicing cable to provide exceptional protection against snow and ice buildup, without compromise. Make the smart choice for quality and safety choose a product that excels in every aspect.
- 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy.
- Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available; Suitable for most roof and gutter configurations.
- Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
See On Amazon
Looking For Something Else?
Search