STM32 Nucleo Development Board with STM32F446RE MCU NUCLEO-F446RE
Asin: B01I8XLEM8 | Model: NUCLEO-F446RE-STMICROELECTRONICS_IT | PartNumber: NUCLEO-F446RE-STMICROELECTRONICS_IT | Ean: 0717520032090 | UPC: 717520032090
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Can Be Powered From Usb.
Support Of Wide Choice Of Integrated Development Environments (Ides) Including Iar, Arm Keil, Gcc-Based Ides.
Three Leds, Two Push-Buttons.
On-Board St-Link/V2-1 Debugger/Programmer With Swd Connector.
Features
- High-performance foundation line, ARM Cortex-M4 core with DSP and FPU, 512 Kbytes Flash, 180 MHz CPU, ART Accelerator, Dual QSPI
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Can be powered from USB
- Three LEDs, Two Push-buttons
- Support of wide choice of Integrated Development Environments (IDEs) including IAR, ARM Keil, GCC-based IDEs
- See more on Amazon...
Brand: Best Price Square | Manufacturer: STMicroelectronics
Dimensions: 1.00 x 4.00 x 3.00 inches
See On Amazon Similar To STM32 Nucleo Development Board with
#1
2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh
Asin: B07Z1WYRQH | Model: 2.13inch e-Paper Display HAT | PartNumber: 2.13inch e-Paper Display HAT | Ean: 0778365986658 | UPC: 778365986658
Spi Interface, For Connecting With Controller Boards Likearduino/Stm32, Etc. Onboard Voltage Translator, Compatible With 3.3V / 5V Mcus..
Comes With Online Development Resources And Manual (Driver Board Circuit Diagram, Examples For Raspberry Pi/Jetson Nano/Arduino/Stm32). Please Read The Online Information Carefully Before Using It..
Version Notice: The Driver Board Is Rev2.1 (Version 2.1), Which Is Independent Of The Screen Version. Currently, There Is Only Rev2.1 (Version 2.1) For The Driver Board And Qc Label V4 Is For The Screen Version, Qc Label V4 Is Currently Being Shipped..
No Backlight, Keeps Displaying Last Content For A Long Time Even When Power Down. Ultra Low Power Consumption, Basically Power Is Only Required For Refreshing..
Features
- This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
- SPI interface, for connecting with controller boards likeArduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
- Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped.
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32). PLEASE READ THE ONLINE INFORMATION CAREFULLY BEFORE USING IT.
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon #2
waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 5/4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122 Resolution SPI Interface Supports Partial Refresh
Asin: B071S8HT76 | Model: 2.13inch e-Paper HAT | PartNumber: 2.13inch e-Paper HAT | Ean: 0614961950627 | UPC: 614961950627
Due To The Advantages Like Ultra Low Power Consumption, Wide Viewing Angle, Clear Display Without Electricity, It Is An Ideal Choice For Applications Such As Shelf Label, Industrial Instrument, And So On..
Standard Raspberry Pi 40Pin Gpio Extension Header, Supports Raspberry Pi Series Boards, Jetson Nano. Spi Interface, For Connecting With Other Controller Boards Like Arduino/Nucleo, Etc. Onboard Voltage Translator, Compatible With 3.3V/5V Mcus.
Provide Online User Manual (Examples For Raspberry Pi/Jetson Nano/Arduino/Stm32), Please Check The Manual Carefully Before Using!.
No Backlight, Keeps Displaying Last Content For A Long Time Even When Power Down. Ultra Low Power Consumption, Basically Power Is Only Required For Refreshing.
This Is An E-Ink Display Hat For Raspberry Pi, 2.13Inch, 250X122 Resolution, With Embedded Controller, Communicating Via Spi Interface, Supports Partial Refresh..
Features
- IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4 are screen versions, and V4 is currently being shipped. V4 version is fully compatible with V3; and it provides the demo that can realize a fast refreshing function.
- This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
- Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
- Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using!
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Dimensions: 3.54 x 7.09 x 3.94 Inches | Weight: 0.02 pounds
See On Amazon #3
HiLetgo 2pcs STM32F103C8T6 ARM STM32 Minimum System Development Board Module STM32F103C8T6 Core Learning Board for Arduino
Asin: B07VKSVM21 | Model: 3-01-1045-2pcs | PartNumber: 3-01-1045-2pcs
Use The Current Smart Phones Of Mirco Usb Interface, Easy To Use, Usb Communication And Power Supply Can Be Done..
Download With Swd Debug Interface, Which Requires A Minimum Of 3 Wires To Complete Debug A Download Task.
Equipped With High Quality 1*40/2.54Mm Spacing Of Single Rows Of Pins, Ensuring Excellent Conductivecontact.
Board Of Mcu-Based Basic Circuits, Such As A Crystal Oscillator Circuit, Usb Interface And Usb Power Management Circuits, And So On..
Features
- The Board lead to all the I/O resources.
- Board of MCU-based basic circuits, such as a crystal oscillator circuit, USB interface and USB power management circuits, and so on.
- Use the current smart phones of Mirco USB interface, easy to use, USB communication and power supply can be done.
- Equipped with high quality 1*40/2.54mm spacing of single rows of pins, ensuring excellent conductivecontact
- Download with SWD debug interface, which requires a minimum of 3 wires to complete debug a download task
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
2.13inch E-Ink Display HAT V4 Version, 250x122 Resolution 3.3V/5V Black White Two-Color e-paper Screen Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B, Supports Partial Refresh, SPI Interface
Asin: B07P9T64BK | Model: 2.13inch E-Ink Display HAT | PartNumber: 2.13inch E-Ink Display HAT | Ean: 0614591448273 | UPC: 614591448273
Preserved Solder Pads For Spi Interface, Compatible With Other Controller Boards Like Arduino/Nucleo, Etc..
No Backlight, Keeps Displaying Last Content For A Long Time Even When Power Down.
Onboard Voltage Translator, Compatible With 3.3V/5V Mcus,Comes With Development Resources And Manual (Examples Compatible With Raspberry Pi/Arduino/Stm32).
Ultra Low Power Consumption, Basically Power Is Only Required For Refreshing.
Features
- This is the latest version 2.13inch e paper display HaT,Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B,Jetson Nano
- Ultra low power consumption, basically power is only required for refreshing
- Preserved solder pads for SPI interface, compatible with other controller boards like Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples compatible with Raspberry Pi/Arduino/STM32)
- No backlight, keeps displaying last content for a long time even when power down
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #5
NUCLEO-F401RE STM32 Nucleo-64 Development Board with STM32F401RE MCU, Supports ST Morpho connectivity
Asin: B07JYBPWN4 | Model: X-NUCLEO-NFC03A1 | PartNumber: X-NUCLEO-NFC03A1 | Ean: 0608614200825 | UPC: 608614200825
Board Expansion Connectors: Uno V3 St Morpho Extension Pin Headers For Full Access To All Stm32 I/Os.
Comprehensive Free Software Libraries And Examples Available With The Stm32cube Mcu Package.
On-Board St-Link/V2-1 Debugger/Programmer With Usb Re-Enumeration Capability. Three Different Interfaces Supported On Usb: Mass Storage, Virtual Com Port And Debug Port.
1 User Led Shared With Uno 1 User And 1 Reset Push-Button.
Features
- STM32 STM32F401RE microcontroller Cortex-M4 in LQFP64 package
- 1 user LED shared with UNO 1 user and 1 reset push-button
- Board expansion connectors: Uno V3 ST morpho extension pin headers for full access to all STM32 I/Os
- On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability. Three different interfaces supported on USB: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- See more on Amazon...
Brand: STMicroelectronics | Manufacturer: STMicroelectronics
Dimensions: 1.00 x 4.00 x 3.00 Inches
See On Amazon #6
2.7inch E-Ink Display HAT,264x176 Pixel Black,White Two-Color 3.3V/5V E-Paper Screen LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano SPI Interface Support Full Refresh
Asin: B07PKSZ3XK | Model: 2.7inch E-Ink display HAT | PartNumber: 2.7inch E-Ink display HAT | Ean: 0614591448105, 0778365986344 | UPC: 614591448105, 778365986344
Onboard Voltage Translator, Compatible With 3.3V/5V Mcus,Onboard 4X Keys.
Ultra Low Power Consumption, Basically Power Is Only Required For Refreshing,No Backlight, Keeps Displaying Last Content For A Long Time Even When Power Down.
Provide Onluine Development Resources And Manual (Examples Compatible With Raspberry Pi/Arduino/Stm32.
Spi Interface, Compatible With Connect With Other Controller Boards Like Raspberry/Arduino/Nucleo, Etc..
Features
- Compatible with Raspberry Pi 4B/3B/3B+/2B/Zero/Zero W
- SPI interface, compatible with connect with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs,Onboard 4x Keys
- Provide onluine development resources and manual (examples compatible with Raspberry Pi/Arduino/STM32
- Ultra low power consumption, basically power is only required for refreshing,no backlight, keeps displaying last content for a long time even when power down
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #7
NUCLEO-F411RE STM32 Nucleo-64 Development Board with STM32F411RE MCU, Supports Arduino and ST Morpho connectivity
Asin: B07JYF8RRB | Model: X-NUCLEO-NFC03A1 | PartNumber: X-NUCLEO-NFC03A1 | Ean: 0608614200832 | UPC: 608614200832
Comprehensive Free Software Libraries And Examples Available With The Stm32cube Mcu Package.
On-Board St-Link/V2-1 Debugger/Programmer With Usb Re-Enumeration Capability. Three Different Interfaces Supported On Usb: Mass Storage, Virtual Com Port And Debug Port.
Features
- STM32 STM32F411RE microcontroller Cortex-M4 in LQFP64 package
- On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability. Three different interfaces supported on USB: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- See more on Amazon...
Brand: STMicroelectronics | Manufacturer: STMicroelectronics
Dimensions: 1.00 x 4.00 x 3.00 inches | Weight: 0.01 pounds
See On Amazon #8
STM32 Nucleo-64 Development Board with STM32L476RG MCU NUCLEO-L476RG
Asin: B01IO3N646 | Model: NUCLEO-L476RG | PartNumber: NUCLEO-L476RG | Ean: 0717520032106 | UPC: 717520032106
Can Be Powered From Usb.
Support Of Wide Choice Of Integrated Development Environments (Ides) Including Iar, Arm Keil, Gcc-Based Ides.
Three Leds, Two Push-Buttons.
On-Board St-Link/V2-1 Debugger/Programmer With Swd Connector.
Features
- Ultra-low-power with FPU ARM Cortex-M4 MCU 80 MHz with 1 Mbyte Flash, LCD, USB OTG, DFSDM
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Can be powered from USB
- Three LEDs, Two Push-buttons
- Support of wide choice of Integrated Development Environments (IDEs) including IAR, ARM Keil, GCC-based IDEs
- See more on Amazon...
Brand: STMicroelectronics | Manufacturer: STMicroelectronics
Dimensions: 1.00 x 4.00 x 3.00 inches | Weight: 0.00 pounds
See On Amazon #9
waveshare 7.5inch E-Ink Display HAT,800x480 Pixel Black,White Two-Color SPI Interface E-Paper Screen LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano no/Ard/Nucleo
Asin: B07Z25LWTS | Model: 7.5inch E-Ink Display HAT-1 | PartNumber: 7.5inch E-Ink Display HAT-1 | Ean: 0778365986689 | UPC: 778365986689
Spi Interface, For Connecting With Other Controller Boards Like Raspberry/Arduino/Nucleo, Etc..
Grey Scale: 2 Full Refresh Time: 5S Refresh Power: 38Mw(Typ.) Standby Power: <0.017Mw Viewing Angle: >170°.
Operating Voltage: 3.3V~5V Interface: Spi Outline Dimension: 170.2Mm × 111.2Mm Display Size: 163.2Mm × 97.92Mm Dot Pitch: 0.205 × 0.204 Resolution: 800×480 Display Color: Black, White.
No Backlight, Keeps Displaying Last Content For A Long Time Even When Power Down. Ultra Low Power Consumption, Basically Power Is Only Required For Refreshing.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, and Jetson Nano
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Operating voltage: 3.3V~5V Interface: SPI Outline dimension: 170.2mm 111.2mm Display size: 163.2mm 97.92mm Dot pitch: 0.205 0.204 Resolution: 800 480 Display color: black, white
- Grey scale: 2 Full refresh time: 5s Refresh power: 38mW(typ.) Standby power: <0.017mW Viewing angle: >170
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #10
EC Buying 3Pcs STM32F401CCU6 STM32 Minimum Core System Learning Development Board Module STM32F4 STM32F401 ARM Cortex-M4 Type-C 256 Kbytes Flash Memory
Asin: B0CPJGHMPR
Up To 256 Kbytes Of Flash Memory.
Stm32f401 Development Board.
Frequency Up To 84 Mhz.
512 Bytes Of Otp Memory.
Features
- Frequency up to 84 MHz
- 512 bytes of OTP memory
- Up to 256 Kbytes of Flash memory
- Frequency up to 84 MHz
- STM32F401 development board
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon #11
STM32 Nucleo-64 Development Board with STM32F103RB MCU, Supports Arduino and ST Morpho connectivity
Asin: B0121QTVV4 | Model: NUCLEO-F103RB | PartNumber: NUCLEO-F103RB | Ean: 0738878281268 | UPC: 738878281268
Can Be Powered From Usb..
Support Of Wide Choice Of Integrated Development Environments (Ides) Including Iar, Arm Keil, Gcc-Based Ides.
Three Leds, Two Push-Buttons.
On-Board St-Link/V2-1 Debugger/Programmer With Swd Connector.
Features
- Mainstream Performance line, ARM Cortex-M3 MCU with 128 Kbytes Flash, 72 MHz CPU, motor control, USB and CAN
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Can be powered from USB.
- Three LEDs, Two Push-buttons
- Support of wide choice of Integrated Development Environments (IDEs) including IAR, ARM Keil, GCC-based IDEs
- See more on Amazon...
Brand: STMicroelectronics | Manufacturer: STMicroelectronics
Dimensions: 1.00 x 4.00 x 3.00 inches | Weight: 0.04 pounds
See On Amazon #12
Stmicroelectronics Nucleo Board, Mcu - NUCLEO-F030R8
Asin: B0121QOO6G | Model: NUCLEO-F030R8 | PartNumber: NUCLEO-F030R8 | Ean: 0738878279401, 5054814589386 | UPC: 738878279401
Features
- Price For: EachOrder Unit: Each 1 Core Architecture:: ARM Core Sub-Architecture:: Cortex-M0 Features:: LQFP Package, 64 Pins, Flexible Board Power Supply Kit Contents:: Nucleo board STM32F030R8T6, Software No. of Bits:: 32bit SVHC:: No SVHC (17-Dec-2014) Silicon Core Number:: STM32F030R8T6 Silicon Family Name:: STM32F0xx Silicon Manufacturer:: STMicroelectronics
- See more on Amazon...
Brand: Best Price Square | Manufacturer: Stmicroelectronics
Weight: 0.00 Pounds
See On Amazon #13
waveshare 2.7inch E-Ink Display HAT,264x176 Pixel Black,White Two-Color 3.3V/5V E-Paper Screen LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano SPI Interface Support Full Refresh
Asin: B07VJ9DY5W | Model: 2.7inch E-Ink Display HAT | PartNumber: 2.7inch E-Ink Display HAT | Ean: 0778365986344 | UPC: 778365986344
Operating Voltage: 3.3V/5V. Interface: 3-Wire Spi, 4-Wire Spi. Outline Dimension: 85Mm × 56Mm. Display Size: 57.288Mm × 38.192Mm. Dot Pitch: 0.217 × 0.217.
Standard Raspberry Pi 40Pin Gpio Extension Header, Supports Raspberry Pi Series Boards, Jetson Nano. Comes With Development Resources And Manual (Examples For Raspberry Pi/Jetson Nano/Arduino/Stm32).
No Backlight, Keeps Displaying Last Content For A Long Time Even When Power Down. Ultra Low Power Consumption, Basically Power Is Only Required For Refreshing. Onboard 4X Keys.Onboard Voltage Translator, Compatible With 3.3V/5V Mcus.
Resolution: 264 × 176 Display Color: Black, White Grey Level: 2 Full Refresh Time: 6S Refresh Power: 24Mw(Typ.) Standby Power: <0.017Mw Viewing Angle: >170°.
Features
- 2.7inch E-Ink display HAT, 264x176 resolution. with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- Resolution: 264 176 Display color: black, white Grey level: 2 Full refresh time: 6s Refresh power: 24mW(typ.) Standby power: <0.017mW Viewing angle: >170
- Operating voltage: 3.3V/5V. Interface: 3-wire SPI, 4-wire SPI. Outline dimension: 85mm 56mm. Display size: 57.288mm 38.192mm. Dot pitch: 0.217 0.217
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Onboard 4x Keys.Onboard voltage translator, compatible with 3.3V/5V MCUs
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Weight: 0.02 Pounds
See On Amazon #14
2PCS STM32F103C6T6 ARM STM32 Minimum System Development Learning Board Module
Asin: B0B2LJFM8T | Model: 13511-1 | PartNumber: 13511-1 | Ean: 0701715532670 | UPC: 701715532670
5V And 3.3V Power Input And Output Interface: Commonly Used In External Power Supply, Or With Other Modules For Common Ground Treatment.
With Double Pin, But The Pin Does Not Default Welding, The User According To Their Own Application Scenarios To Choose Their Own Welding Direction..
With Swd Simulation Debug Download Interface, Simple And Convenient, Debugging Speed..
The Use Of The Mirco Usb Interface, You Can Do Usb Communication And Power Supply, Usb Interface, Compatible With The Ordinary.
Features
- The core board is divided into two rows leads to all the I / O port.
- The use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary
- 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment
- with SWD simulation debug download interface, simple and convenient, debugging speed.
- with double pin, but the pin does not default welding, the user according to their own application scenarios to choose their own welding direction.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #15
Wishiot 2pcs TCS3472 RGB Light Color Sensor Recognition Module RGB IIC Color Light Sensor Development Board with IR Filter for Arduino STM32
Asin: B0CW9PQPYX
3. Features High Sensitivity, Wide Dynamic Range And Ir Blocking Filters.
5. The Design Is Supplied With Ardunio And Stm32 Sample Programs, And Datasheet Files Are Also Available (Customer Needs To Provide The Method So That Customer Service Can Send The Files).
4. Dual-Aperture Versions Are Laid Out With 2 Leds To Fill In The Light On The Object.
2. The Integrated Infrared Blocking Filter Minimizes The Infrared Spectral Component Of Incident Light And Allows For Accurate Color Measurement.
Features
- 1. This module is a color sensor based on AMS's TCS3472XFN color light-to-digital converter as the core, the sensor provides digital outputs of red, green, blue (RGB) and clear light sensing values
- 2. The integrated infrared blocking filter minimizes the infrared spectral component of incident light and allows for accurate color measurement
- 3. Features high sensitivity, wide dynamic range and IR blocking filters
- 4. Dual-aperture versions are laid out with 2 LEDs to fill in the light on the object
- 5. The design is supplied with Ardunio and STM32 sample programs, and datasheet files are also available (customer needs to provide the method so that customer service can send the files)
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Warranty: NO
See On Amazon #16
waveshare 2.13inch E-Ink Display HAT Compatible with Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 212x104 Resolution Three-Color SPI Interface
Asin: B075FR81WL | Model: 2.13inch e-Paper HAT (B) | PartNumber: 2.13inch e-Paper HAT (B) | Ean: 0614961950993 | UPC: 614961950993
Due To The Advantages Like Ultra Low Power Consumption, Wide Viewing Angle, Clear Display Without Electricity, It Is An Ideal Choice For Applications Such As Shelf Label, Industrial Instrument, And So On..
Standard Raspberry Pi 40Pin Gpio Extension Header, Supports Raspberry Pi Series Boards, Jetson Nano. Spi Interface, For Connecting With Other Controller Boards Like Arduino/Nucleo, Etc.. Onboard Voltage Translator, Compatible With 3.3V/5V Mcus.
No Backlight, Keeps Displaying Last Content For A Long Time Even When Power Down. Ultra Low Power Consumption, Basically Power Is Only Required For Refreshing.
This Is An E-Ink Display Hat For Raspberry Pi, 2.13Inch, 212X104 Resolution, With Embedded Controller, Communicating Via Spi Interface, Supports Red, Black, And White Three-Color Display..
Features
- Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using!
- This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
- Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.. Onboard voltage translator, compatible with 3.3V/5V MCUs
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Weight: 0.02 pounds
See On Amazon #17
waveshare Three Color 2.13inch E-Ink Display HAT (B), 212x104 Resolution 3.3V/5V Red Black White E-Paper Display Screen for Raspberry Zero/Zero W/Zero WH/2B/3B/3B+ SPI Interface,Full Refresh
Asin: B07Q22WDB9 | Model: 2.13inch E-Ink display HAT (B) | PartNumber: 2.13inch E-Ink display HAT (B) | Ean: 0614591447993 | UPC: 614591447993
No Backlight, Keeps Displaying Last Content For A Long Time Even When Power Down.
Onboard Voltage Translator, Compatible With 3.3V/5V Mcus,Comes With Development Resources And Manual (Examples For Raspberry Pi/Stm32).
Preserved Solder Pads For Spi Interface, For Connecting With Other Controller Boards Like Arduino/Nucleo, Etc..
Compatible With Raspberry Pi Zero/Zero W/Zero Wh/2B/3B/3B+.
Features
- This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
- Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
- No backlight, keeps displaying last content for a long time even when power down
- Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/STM32)
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Weight: 0.11 pounds
See On Amazon #18
STM32F3DISCOVERY ST STM32F303VCT6 STM32 F3 ARM Cortex-M4 MCU Discovery Evaluation Development Board kit Embedded ST-Link/V2 debugger @XYGStudy
Asin: B00CWWSE6G | Model: 6.10373E+11 | PartNumber: 6.10373E+11 | Ean: 0610373479183 | UPC: 610373479183
Based On The Stm32f303vct6, It Includes An St-Link/V2 Embedded Debug Tool, Accelerometer, Gyroscope And E-Compass St Mems, Usb Connection, Leds And Pushbuttons..
Stm32f303vct6 Microcontroller Featuring 256 Kb Flash, 48 Kb Ram In An Lqfp100 Package, On-Board St-Link/V2 With Selection Mode Switch To Use The Kit As A Standalone St-Link/V2 (With Swd Connector For Programming And Debugging).
The Stm32f3discovery Helps You To Discover The Stm32 F3 Series Cortex-M4 Mixed-Signals Features And To Develop Your Applications Easily. It Includes Everything Required For Beginners And Experienced Users To Get Started Quickly..
Features
- Part Number: STM32F3DISCOVERY
- The STM32F3DISCOVERY helps you to discover the STM32 F3 series Cortex-M4 mixed-signals features and to develop your applications easily. It includes everything required for beginners and experienced users to get started quickly.
- Based on the STM32F303VCT6, it includes an ST-LINK/V2 embedded debug tool, accelerometer, gyroscope and e-compass ST MEMs, USB connection, LEDs and pushbuttons.
- STM32F303VCT6 microcontroller featuring 256 KB Flash, 48 KB RAM in an LQFP100 package, On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- See more on Amazon...
Brand: XYG-ST | Manufacturer: XYG-ST
See On Amazon #19
[initeq] STM32 ARM STM32F103C8T6 Blue Pill Minimum System Development Board with ST-Link V2 USB Programmer (2-Pack + ST-Link V2)
Asin: B079B95L9Y | Model: STM32BPSL01 | PartNumber: STM32BPSL01 | Ean: 0810673030927 | UPC: 810673030927
20Kb Ram.
Microusb And St-Link Connectors.
32 Khz Rtc Real Time Clock Crystal.
64Kb Flash.
Features
- 32-Bit ARM Cortex M3 72MHz
- 64KB Flash
- 20KB RAM
- 32 kHz RTC Real Time Clock Crystal
- MicroUSB and ST-Link Connectors
- See more on Amazon...
Brand: initeq | Manufacturer: initeq
See On Amazon
Looking For Something Else?
Search