Align R/C 500 Tail Boom Brace
Asin: B01IH0HLB0 | Ean: 4713413957200
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.●Tail Boom Brace End X 4.
●Tail Boom Brace X 2(Φ1.9Xφ3.9X322mm).
●Use For T-Rex 500..
Features
- ALIGN H50036A Tail Boom Brace
- Use for T-REX 500.
- Tail boom brace end x 4
- Tail boom brace x 2( 1.9x 3.9x322mm)
- See more on Amazon...
Brand: Align | Manufacturer: ALIGN
Dimensions: 0.25 x 14.00 x 2.50 inches | Weight: 0.04 Pounds
See On Amazon Similar To Align R C 500 Tail
#1
Nilight 6Inch Oval Trailer Tail Light with flush Mount Grommets Plugs w/Mounting Brackets 2PCS Red Waterproof Stop Brake Turn Trailer Lights for RV Truck, 2 Years Warranty
Asin: B0BR8ZYX2S | Model: TR-126 | PartNumber: TR-126 | Ean: 0840323901680 | UPC: 840323901680
Upgraded Unique Design: Nilight's Tail Light Has Unique “Ears” On Its Two Sides, Upgrade Notches On The Inside Of Grommet, And A Tighter Attaching Ability Between 3-Prong Plug And It. These Help The Light And Grommet Fit Perfectly And Firmly On Mounting Bracket, And The 3-Prong Plug Attaches Tightly On The Light. Shake Proof, There Will Be No Worries Of Loosing Light Or Wires..
Extensive Application: Universal Fit For Dc 12V System, Function As Turn/Brake Light And Tail Light For All Kinds Of Trucks, Trailers, Tractors, Semi-Trailer, Horse Trailer, Travel Trailer, Dump Truck, Boat, Special Vehicle, Etc. Just Make Sure The Hole Size Before You Purchase. 2 Years Warranty Honored By Nilight..
Ready For The Weather: The Oval Taillight Is Highly Silicone Sealed, Ip65 Waterproof Rating, Always Be Ready For Different Kinds Of Weather Attack. The Mounting Bracket Is A Durable Metal Coated With High-Quality Black Powder. It Is Not Easy To Lose Paint And Rust..
Quick Installation: First, Successively Install The Rubber Grommet, Oval Taillight With 3-Prong Plug Onto The Bracket. Then Align The Bracket Hole With The Hole On Vehicle, Screw Goes Through The Hole, And Then Tighten The Nut. Last Connect The 3 Wires To The Corresponding Wires On Vehicles. Round Hole Diameter Is 0.39”..
Features
- Awesome Brightness: Each tail light has 10PCS high-quality 3030 LED chips to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.
- Quick installation: First, successively install the rubber grommet, oval taillight with 3-prong plug onto the bracket. Then align the bracket hole with the hole on vehicle, screw goes through the hole, and then tighten the nut. Last connect the 3 wires to the corresponding wires on vehicles. Round hole diameter is 0.39 .
- Upgraded Unique Design: Nilight's tail light has unique ears on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light and grommet fit perfectly and firmly on mounting bracket, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires.
- Ready For The Weather: The oval taillight is highly silicone sealed, IP65 waterproof rating, always be ready for different kinds of weather attack. The mounting bracket is a durable metal coated with high-quality black powder. It is not easy to lose paint and rust.
- Extensive Application: Universal fit for DC 12V system, function as turn/brake light and tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump truck, Boat, special vehicle, etc. Just make sure the hole size before you purchase. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #2
Car Exterior Emblems Badge 3D Sticker Decal, Fuck-IT Edition Emblem 3D Fender Badge Decal Car Truck Replacement, Fit for All Cars (Black)
Asin: B0BQBRPKPF | Model: qp5107 | PartNumber: qp5107
[Easy To Install]: 1. Clean The Position To Be Pasted, And Keep It Dry, Free Of Oil And Dirt. No Waxing In Three Days. 2. Carefully Remove The Protective Film On The Back Of The Logo; Align With The Part To Be Pasted. 3. Push It From Top To Bottom Along The Vehicle Logo And Press It Firmly Again; 4. Do Not Wash The Car Within 48 Hours After Pasting..
[About Us]: We Are A Professional Auto Parts Manufacturer. We Can Make Your Car No Longer Dull. Our Core Value Is To Sell High-Quality Products. Our Goal Is To Satisfy Customers..
[Fuck It Edition Emblem]: 3D Badge Decal Sticker Replacement For F-150 F250 F350 Silverdo 1500 2500 Sierra Gmc Chevy Truck Suv And All Cars., 3D Sticker Decal Fuck It Edition Emblem Not Only Can Decorate Your Car, But Also Can Cover The Original Car Defects, Let You Car Attract The Attention Of Other Drivers..
[Wide Application]: The Badge Is 3.46 Inches Long, 0.9 Inches Wide, And 0.2 Inches Thick.The Perfect Car Logo (Exterior, Front Grille, Trunk, Body, Engine Cover, Bellows Cover, Interior, Etc.), And Is Used For Body Decoration, Instrument Panel, Track, Motorcycle And Scooter. It Can Also Be Pasted On The Metal And Glass Surfaces Of Laptops And Tablets, And Can Be Pasted Anywhere You Want..
Features
- [High quality materials]: Fuck IT Edition Emblem is made of high-quality Zinc Alloy materials, which are waterproof, sunscreen, rust proof, hard and wear-resistant, and durable.
- [Wide Application]: The badge is 3.46 inches long, 0.9 inches wide, and 0.2 inches thick.The perfect car logo (exterior, front grille, trunk, body, engine cover, bellows cover, interior, etc.), and is used for body decoration, instrument panel, track, motorcycle and scooter. It can also be pasted on the metal and glass surfaces of laptops and tablets, and can be pasted anywhere you want.
- [Easy to install]: 1. Clean the position to be pasted, and keep it dry, free of oil and dirt. No waxing in three days. 2. Carefully remove the protective film on the back of the logo; Align with the part to be pasted. 3. Push it from top to bottom along the vehicle logo and press it firmly again; 4. Do not wash the car within 48 hours after pasting.
- [Fuck IT Edition Emblem]: 3D Badge Decal Sticker Replacement for F-150 F250 F350 Silverdo 1500 2500 Sierra GMC Chevy Truck SUV and All Cars., 3D Sticker Decal Fuck IT Edition Emblem not only can decorate your car, but also can cover the original car defects, Let you car attract the attention of other drivers.
- [About us]: We are a professional auto parts manufacturer. We can make your car no longer dull. Our core value is to sell high-quality products. Our goal is to satisfy customers.
- See more on Amazon...
Brand: DWARFOO | Manufacturer: DWARFOO
Warranty: No Applicable
See On Amazon #3
Nilight 50035R 2FT Ring Wire 2 Pin Lug Cable, Eyelet Terminal Harness Extension Charge Cord, Quick Disconnect SAE Connection Lead for Motorcycle, Car, Tractor with 10A Fuse, 2 Years Warranty
Asin: B07R2L827M | Model: 50035R | PartNumber: 50035R | Ean: 0812227031633 | UPC: 812227031633
Excellent Compatible Sae Connector: 2 Pin, Positive Insulated, Quick Connect/Disconnect. Can Plugs Into Most Maintenance Battery Chargers Such As Battery Tenders, Schumacher Etc.
Wide Application: It Can Be Added To Car, Motorcycle, Snowmobiles, Tractor, Riding Mower, Scooter, Atv, Boat Etc To Keep Battery Charged Easily. Avoid Hassle Of Accessing And Dismantling The Battery Compartment Every Time.
High Protection: 10A Fused Is Included In Safe Box For Electrical Protection While The Sae Connector Is Positive Insulated And Designed With A Waterproof Cover To Protect It From Raindrops And Dust..
Multi-Purpose: Provide Convenient Way To Either Keep Your Hard-To-Access Battery Charged And Alive Or Draw Power From Your Own Battery To Save Other Battery..
Features
- 1. SAE to O ring terminal harness wire, comes with 2 feet long SPT-2 16AWG/2C flexible copper wire include 10A fuse, designed for extending car.
- Multi-purpose: provide convenient way to either keep your hard-to-access battery charged and alive or draw power from your own battery to save other battery.
- Excellent Compatible SAE Connector: 2 pin, positive insulated, quick connect/disconnect. Can plugs into most maintenance battery chargers such as Battery Tenders, Schumacher etc
- High Protection: 10A fused is included in safe box for electrical protection while the SAE connector is positive insulated and designed with a waterproof cover to protect it from raindrops and dust.
- Wide Application: It can be added to car, motorcycle, snowmobiles, tractor, riding mower, scooter, ATV, boat etc to keep battery charged easily. Avoid hassle of accessing and dismantling the battery compartment every time
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.77 x 7.48 x 3.94 inches | Weight: 0.11 pounds
Warranty: 2 Years Warranty
See On Amazon #4
Kewucn Car Aluminum License Plate Light Bracket, Auto License Plate Holder Bracket and Light Mount, Universal Vehicle Exterior Accessories for UTV ATV Trailer Truck RV Motorcycles (Black)
Asin: B0CCNJR15M | Model: Trailer License Plate Light Bracket | PartNumber: Trailer License Plate Light Bracket
【Installation Steps】: It Is Easy To Install This License Plate Light Bracket. First, Remove The License Plate And Tail Light From The Original License Plate Bracket And Remove The Old License Plate Bracket With A Screwdriver. Then, Align The Screws And Install This Bracket. Finally, Attach The License Plate And Secure It..
【Widely Applicable】: Suitable For Stud Mounted Lights Or Combination Taillights And Brake Lights, The Standard Size Of This Bracket Makes It Fit Most Trailers And Trucks. It Is Also Compatible With Many Vehicles Such As Motorcycles, Boats, Transporters, Construction Vehicles, Snowmobiles And Other Trailers..
【Package & Size】: You Will Receive Two Trailer License Plate Light Brackets, Enough For Your Use And Replacement Needs. It Measures 9.41×5.06 Inches. Its Top Two Small Holes Are 0.43 Inches High, The Center Mounting Hole Is 1.44 Inches High, And The Bottom Two Slim Holes Are 2.32 Inches Long..
【Unique Look】: This Trailer License Plate Light Bracket Has A Shiny Metal Finish And Embossed Diamond Pattern To Provide A Cool And Unique Appearance To Your Car's Exterior. With It Accenting Your License Plate Light, It Will Make Your Car Full Of Personality And Become Eye-Catching..
Features
- Prime Quality : The trailer license plate light bracket is made of high quality aluminum. Its surface is polished, which is not only wear-resistant but also very preventive against corrosion and rust. It is hard enough so it is not easy to break or deform and can be used for a long time.
- Unique Look : This trailer license plate light bracket has a shiny metal finish and embossed diamond pattern to provide a cool and unique appearance to your car's exterior. With it accenting your license plate light, it will make your car full of personality and become eye-catching.
- Installation Steps : It is easy to install this license plate light bracket. First, remove the license plate and tail light from the original license plate bracket and remove the old license plate bracket with a screwdriver. Then, align the screws and install this bracket. Finally, attach the license plate and secure it.
- Package & Size : You will receive two trailer license plate light brackets, enough for your use and replacement needs. It measures 9.41 5.06 inches. Its top two small holes are 0.43 inches high, the center mounting hole is 1.44 inches high, and the bottom two slim holes are 2.32 inches long.
- Widely Applicable : Suitable for stud mounted lights or combination taillights and brake lights, the standard size of this bracket makes it fit most trailers and trucks. It is also compatible with many vehicles such as motorcycles, boats, transporters, construction vehicles, snowmobiles and other trailers.
- See more on Amazon...
Brand: Kewucn | Manufacturer: Kewucn
Dimensions: 0.10 x 9.41 x 5.06 inches
Warranty: 0.2
See On Amazon #5
Augeny Aluminum License Plate Light Bracket, Auto License Plate Holder Bracket with Light Mount, Universal Vehicle Accessories for Mounting Bracket Trailers, Trucks, Cars (1 PC, Black)
Asin: B0CJ4W15TB | Model: Aluminum License Plate Light Bracket | PartNumber: Aluminum License Plate Light Bracket
【Rust & Moisture Proof】: This Trailer License Plate Mount Bracket Is Meticulously Crafted From A High-Quality Aluminum Alloy, Meticulously Chosen For Its Exceptional Resistance To Rust And Corrosion. It Outperforms Plastic Alternatives And Is Specifically Designed To Withstand Damage And Endure Harsh Climatic Conditions..
【Size Information】: The 2 Top Mounting Holes Are High 0.42 Inches. Light Mount Hole Is High 1.4 Inches. Bottom License Plate Slots Are Wide 2.32Inches. This License Plate Light Bracket Fits Most Truck And Trailer, Motorcycle. It Also Compatible With Most License Plate And Box-Style Lamps..
【Easy To Install】: It Is Designed To Be Easy To Assemble And Already Includes Pre-Designed Holes For Spring Clips. It's Essential To Ensure That The Bracket's Surface Is Clean And Ready For Attachment. After The Film Is Removed, Align The Bracket's Screw Holes Meticulously With The Corresponding Screw Locations On The Rear Lights. Once The Screws Are Correctly Positioned, Proceed To Tighten Them Securely..
【Resistant To Deformation】: The Thickened Material Is Resistant To Deformation And Can Securely Hold Heavy Objects. Its Hollow, Scientifically Designed Structure Ensures Balanced Force Distribution. The Trailer License Plate Holder Features A Polished Surface, Which Is Not Easy To Deformed..
Features
- Sturdy & Durable : This trailer license plate mount bracket is constructed from sturdy aluminum alloy, ensuring durability and sturdiness. One-piece molding process with no welding points results in a significantly more robust overall structure. Additionally, it includes a scratch-proof film to effectively prevent any scratches during transit.
- Resistant to Deformation : The thickened material is resistant to deformation and can securely hold heavy objects. Its hollow, scientifically designed structure ensures balanced force distribution. The trailer license plate holder features a polished surface, which is not easy to deformed.
- Rust & Moisture Proof : This trailer license plate mount bracket is meticulously crafted from a high-quality aluminum alloy, meticulously chosen for its exceptional resistance to rust and corrosion. It outperforms plastic alternatives and is specifically designed to withstand damage and endure harsh climatic conditions.
- Easy to Install : It is designed to be easy to assemble and already includes pre-designed holes for spring clips. It's essential to ensure that the bracket's surface is clean and ready for attachment. After the film is removed, align the bracket's screw holes meticulously with the corresponding screw locations on the rear lights. Once the screws are correctly positioned, proceed to tighten them securely.
- Size Information : The 2 top mounting holes are high 0.42 inches. Light mount hole is high 1.4 inches. Bottom license plate slots are wide 2.32inches. This license plate light bracket fits most truck and trailer, motorcycle. It also compatible With most license plate and box-style lamps.
- See more on Amazon...
Brand: Augeny | Manufacturer: Augeny
Warranty: 0.2
See On Amazon #6
Nilight Hitch Cargo Carrier Oval Light Kit 2PCS 6Inch Red Lights w/Flush Mount Grommet Bracket Harness Waterproof Stop Turn Signal Tail Light for Luggage Rack Bike Rack Truck Trailer, 2 Years Warranty
Asin: B0CY5GJT5K | Model: TL-199 | PartNumber: TL-199 | Ean: 0840323921572 | UPC: 840323921572
Simple Installation: Firstly, Install The Bracket In The Appropriate Position. The Diameter Of The Bracket Mounting Hole Is 0.39”. Then Insert The 3Prong Plug Of The Wiring Harness Into The Back Socket Of The Lights And Fix The Harness With Ties. Finally, Insert The 4Pin Male Connector Into The 4Pin Female Connector On The Vehicle.
Extensive Application: Universal Fit For 12V Dc 4-Wire Cars System, Function As Turn/Brake Light And Tail Light For Luggage Rack, Bike Rack And Cargo Carrier. Also Widely Used On All Kinds Of Trucks, Trailers, Tractors, Boat, Special Vehicle, Etc. 2 Years Warranty Honored By Nilight.
Upgraded Unique Design: Nilight's Tail Light Has Unique “Ears” On Its Two Sides, Upgrade Notches On The Inside Of Grommet, Make The Grommet And Light Tightly Connected And Prevent Them From Falling Off. Equipped With An 82.68” Wire Harness, One End Of The Harness Is Equipped With Two 3-Prong Plugs That Can Securely Connect The Oval Lights. Also Set A 4-Way Flat Plug On The Other End To Perfectly Connect To The Connector On The Vehicle.
Ready For The Weather: The Oval Taillight Adopts Ultrasonic Technology To Tightly Embed The Lens And Lamp Body Together, Achieving A High Sealing Ip67 Waterproof Level. Always Be Ready For Different Kinds Of Weather Attack.
Features
- Awesome Brightness: Each tail light has 10PCS high-quality 3030 LED chips to output super bright red light. The aluminum substrate circuit board adds more electronic components, making the circuit more stable and durable
- Ready For The Weather: The oval taillight adopts ultrasonic technology to tightly embed the lens and lamp body together, achieving a high sealing IP67 waterproof level. Always be ready for different kinds of weather attack
- Simple Installation: Firstly, install the bracket in the appropriate position. The diameter of the bracket mounting hole is 0.39 . Then insert the 3prong plug of the wiring harness into the back socket of the lights and fix the harness with ties. Finally, insert the 4pin male connector into the 4pin female connector on the vehicle
- Upgraded Unique Design: Nilight's tail light has unique ears on its two sides, upgrade notches on the inside of grommet, make the grommet and light tightly connected and prevent them from falling off. Equipped with an 82.68 wire harness, one end of the harness is equipped with two 3-prong plugs that can securely connect the oval lights. Also set a 4-way flat plug on the other end to perfectly connect to the connector on the vehicle
- Extensive Application: Universal fit for 12V DC 4-wire cars system, function as turn/brake light and tail light for luggage rack, bike rack and cargo carrier. Also widely used on all kinds of trucks, trailers, tractors, Boat, special vehicle, etc. 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #7
Nilight 4Inch Round Trailer Tail Light with flush Mount Grommets Plugs w/Mounting Brackets 2PCS Red Waterproof Stop Brake Turn Trailer Lights for RV Truck Trailer, 2 Years Warranty
Asin: B0BR9HFBXS | Model: TR-127 | PartNumber: TR-127 | Ean: 0840323901697 | UPC: 840323901697
Upgraded Unique Design: Upgrade Notches On The Inside Of Grommet, Three Bulges Are Added To Create A Tighter Attaching Ability Between The Grommet And Taillight. These Help The Taillight Not Fall Out, And Can Be Firmly Fixed On The Mounting Bracket With Grommet. 3-Prong Plug Also Attaches Tightly On The Light. Shake Proof, There Will Be No Worries Of Loosing Light Or Wires..
Extensive Application: Universal Fit For Dc 12V System, Function As Turn/Brake Light And Tail Light For All Kinds Of Trucks, Trailers, Tractors, Semi-Trailer, Horse Trailer, Travel Trailer, Dump Truck, Boat, Special Vehicle, Etc. Just Make Sure The Hole Size Before You Purchase. 2 Years Warranty Honored By Nilight..
Durable For Weather: The Round Taillight Is Highly Silicone Sealed, Ip67 Waterproof Rating, Always Be Ready For Different Kinds Of Weather Attack. The Mounting Bracket Is A Durable Metal Coated With High-Quality Black Powder. It Is Not Easy To Lose Paint And Rust..
Easy Installation: First, Successively Install The Rubber Grommet, Round Taillight With 3-Prong Plug Onto The Bracket. Then Align The Bracket Hole With The Hole On Vehicle, Screw Goes Through The Hole, And Then Tighten The Nut. Last Connect The 3 Wires To The Corresponding Wires On Vehicles. Round Hole Diameter Is 0.39”..
Features
- Upgraded LED: Each light is composed of 12PCS upgrade high-quality 3030 SMD LED chips, features wider lighting angle, and better heat dissipation. Output 3 time brighter light than others. High brightness for Turn/Brake light, low brightness for Tail light.
- Easy Installation: First, successively install the rubber grommet, round taillight with 3-prong plug onto the bracket. Then align the bracket hole with the hole on vehicle, screw goes through the hole, and then tighten the nut. Last connect the 3 wires to the corresponding wires on vehicles. Round hole diameter is 0.39 .
- Upgraded Unique Design: Upgrade notches on the inside of grommet, three bulges are added to create a tighter attaching ability between the grommet and taillight. These help the taillight not fall out, and can be firmly fixed on the mounting bracket with grommet. 3-prong plug also attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires.
- Durable For Weather: The round taillight is highly silicone sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. The mounting bracket is a durable metal coated with high-quality black powder. It is not easy to lose paint and rust.
- Extensive Application: Universal fit for DC 12V system, function as turn/brake light and tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump truck, Boat, special vehicle, etc. Just make sure the hole size before you purchase. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #8
2PCS 2.5" Exhaust Gasket Kit Include 4PCS Exhaust Bolts,2-Bolt Exhaust Flange Gasket for Automotive Replacement Exhaust Manifold Gasket OEM#120-06310-0002,Premium Car Accessories(2.5inch)
Asin: B0CTHMJV87 | Model: Exhaust Gasket Kit | PartNumber: Exhaust Gasket Kit
High Sealing Performance: Exhaust Flange Gaskets Have Excellent Sealing And Insulating Properties, Preventing Gas From Escaping From The Pipe, And Also Help To Reduce Engine Noise And Improve Its Efficiency, Thereby Extending The Life Of The Engine Cylinder Head..
Easy Installation: This Two-Hole Gasket Is Easy To Install, The Kit Comes With 4X M10*1.5/49Mm Bolts, It Arrives Ready To Install Immediately, No Need To Prepare Extra Accessories! Place The Muffler Gasket On The Connector, Align The Piston Holes With The Threaded Holes, And Tighten The Nuts And Bolts To Secure The Gasket In Place!.
Performance Enhancement: By Using This Exhaust Manifold Gasket, The Pipe Interface Can Be Better Connected To Ensure The Stability And Tightness Of The Interface, Which Can Enhance The Power System Of The Car, It Is An Excellent Performance Automotive Parts..
High Temperature Resistant Material: This Gasket Is Made Of Plated Iron And Graphite Composite Structural Material, Which Is Resistant To High Temperature, High Pressure And Abrasion. The Gasket Material Fills The Tiny Gap Between The Intake Manifold And The Engine, Ensuring A Seamless Connection..
Features
- BUYERS MANUAL: Our automotive exhaust pipe gasket OEM#120-06310-0002 measures 5.6"L x 3.4"W x 0.08"H with a 2.5" inside diameter. The exhaust flange comes with two bolt holes spaced 3.27-5.14" apart for bolt hardware smaller than 13.5mm or 0.53". Please double check that our washers fit your car before purchasing.
- HIGH TEMPERATURE RESISTANT MATERIAL: This gasket is made of plated iron and graphite composite structural material, which is resistant to high temperature, high pressure and abrasion. The gasket material fills the tiny gap between the intake manifold and the engine, ensuring a seamless connection.
- HIGH SEALING PERFORMANCE: Exhaust flange gaskets have excellent sealing and insulating properties, preventing gas from escaping from the pipe, and also help to reduce engine noise and improve its efficiency, thereby extending the life of the engine cylinder head.
- PERFORMANCE ENHANCEMENT: By using this exhaust manifold gasket, the pipe interface can be better connected to ensure the stability and tightness of the interface, which can enhance the power system of the car, it is an excellent performance automotive parts.
- EASY INSTALLATION: This two-hole gasket is easy to install, the kit comes with 4x M10*1.5/49mm bolts, it arrives ready to install immediately, no need to prepare extra accessories! Place the muffler gasket on the connector, align the piston holes with the threaded holes, and tighten the nuts and bolts to secure the gasket in place!
- See more on Amazon...
Brand: IHOTDER | Manufacturer: IHOTDER
Dimensions: 0.08 x 5.60 x 3.40 inches | Weight: 0.24 Pounds
See On Amazon #9
Dickno AWD Emblem Sticker, 3D Metal Letter Tailgate Side Badge Decal, Self Adhesive Auto Side Fenders Decoration for All Wheel Drive, Universal Vehicle Exterior Decor Accessories (Black)
Asin: B0CN15XQW7 | Model: AWD Emblem Sticker | PartNumber: AWD Emblem Sticker
【Metal Material】: This Awd Badge Sticker Is Made Of Premium Metal Material. It Has Bright Gloss And Is Not Easy To Rust. It Is Waterproof And Does Not Easy To Fade. It Also Has Excellent Durability And Wear Resistance, Which Is Suitable For Long-Term Use..
【Wide Application】: This Badge Decal Only Measures 3.62 × 0.59 Inches, Which Is Small And Portable. It Is Suitable For Sticking On The Trunk, Tailgate, Side Fenders And Other Parts Of Most Vehicles. It Can Also Be Given As A Decorative Gift To Car-Owning Friends And Car Lovers..
【Easy To Install】: The Decal Is Self-Adhesive To Apply. Before Installation, The Parts To Be Pasted Need To Be Cleaned To Ensure There Are No Oil Or Water Stains. Peel Off The Double-Sided Tape Protective Film On The Back And Align The Adhesive Partes. Just Press Firmly On The Decal For A Few Seconds..
【Cover Scratches】: Applying A Body Badge Sticker To A Scratched Area Can Be Used To Cover Previous Body Scratches, Making The Scratches Invisible. It Can Also Protect The Car Body And Prevent New Scratches On The Pasted Area..
Features
- Stylish Decoration : The AWD letter decorative decal is the abbreviation of All-Wheel Drive. It comes in a variety of colors to match your car body, making the car exterior fashionable, beautiful and creative. It can also show that your car uese a full-time four-wheel drive system.
- Cover Scratches : Applying a body badge sticker to a scratched area can be used to cover previous body scratches, making the scratches invisible. It can also protect the car body and prevent new scratches on the pasted area.
- Metal Material : This AWD badge sticker is made of premium metal material. It has bright gloss and is not easy to rust. It is waterproof and does not easy to fade. It also has excellent durability and wear resistance, which is suitable for long-term use.
- Easy to Install : The decal is self-adhesive to apply. Before installation, the parts to be pasted need to be cleaned to ensure there are no oil or water stains. Peel off the double-sided tape protective film on the back and align the adhesive partes. Just press firmly on the decal for a few seconds.
- Wide Application : This badge decal only measures 3.62 0.59 inches, which is small and portable. It is suitable for sticking on the trunk, tailgate, side fenders and other parts of most vehicles. It can also be given as a decorative gift to car-owning friends and car lovers.
- See more on Amazon...
Brand: Dickno | Manufacturer: Dickno
Warranty: 0.2
See On Amazon #10
Love Heart Logo Rear Trunk Emblem, 3D Badge Decal Sticker, Car Accessories Exterior Decoration, Car Replacement 3D Sticker Fit for Audi A3 A4 A5 A6 A8 TT R8 Q3 Q5 Q7 (Pink)
Asin: B0C2YWCK79 | Model: 3038 | PartNumber: 3038
[Love Heart Logo Rear Trunk Emblem]: This 3D Sticker Decal Can Not Only Decorate Your Car, But Also Cover Up The Defects Of The Original Car, So That Your Car Can Attract The Attention Of Other Drivers, Which Is The Perfect Car Interior Accessories..
[Best Gift]: Simple Love Design, Car Stickers Are Very Fashionable, Car Exterior Emblems Badge Is The Perfect Gift For Friends, Bosses, Family, Etc..
[Easy Installation] : Clean And Keep Dry Where You Need To Paste. Remove 3M Adhesive On The Back.Align With Where You Want To Paste And Press Until Firm. Don't Wash Your Car For 48 Hours After Pasting..
[Scope Of Application] : The Car Logo Sticker Is 8.58 Inches Long, 2.76 Inches Wide And 0.27 Inches Thick. Perfect Car Logo Replacement For Audi A3 A4 A5 A6 A8 Tt R8 Q3 Q5 Q7, Can Also Be Used For Body Decoration, Dashboards, Racetracks, Motorcycles, Scooters, Etc.It Can Also Be Affixed To The Metal And Glass Surfaces Of Laptops And Tablets, And Can Be Affixed Anywhere You Want..
Features
- [High quality] : 3D Badge Decal Sticker made of high-quality ABS material, has good heat resistance, impact resistance, can be used for a long time.
- [Scope of application] : The car logo sticker is 8.58 inches long, 2.76 inches wide and 0.27 inches thick. Perfect car logo replacement for Audi A3 A4 A5 A6 A8 TT R8 Q3 Q5 Q7, can also be used for body decoration, dashboards, racetracks, motorcycles, scooters, etc.It can also be affixed to the metal and glass surfaces of laptops and tablets, and can be affixed anywhere you want.
- [Love Heart Logo Rear Trunk Emblem]: This 3D Sticker Decal can not only decorate your car, but also cover up the defects of the original car, so that your car can attract the attention of other drivers, which is the perfect car interior accessories.
- [Easy Installation] : Clean and keep dry where you need to paste. Remove 3M adhesive on the back.Align with where you want to paste and press until firm. Don't wash your car for 48 hours after pasting.
- [Best gift]: Simple love design, Car stickers are very fashionable, Car Exterior Emblems Badge is the perfect gift for friends, bosses, family, etc.
- See more on Amazon...
Brand: Middrivr | Manufacturer: Middrivr
Dimensions: 0.28 x 8.58 x 2.76 inches
Warranty: No Applicable
See On Amazon
Looking For Something Else?
Search