Catalytic Converter replacement for toyota rav4 with 1996 1997 rear 2.0L
Asin: B01JTOX8II | Model: B43/F28/F28/G4/C-L-6" | PartNumber: B43/F28/F28/G4/C-L-6"
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Po420/Po430 Code/Check Engine: There Is No Guarantee That Replacing The Converter Will Keep A Fault Code/Engine Light From Coming Back. If An Engine Performance Issues Exist, And It Has Not Been Repaired, The Po420/Po430 Fault Code May Reoccur..
Aftermarket Catalytic Converters: Kindly Note, These Products Are Aftermarket Products, Therefore, They Will Not Appear As The Original Stock Oem Parts..
Under Federal Law: Catalytic Converter May Not Be Removed And Replaced With "Converter Replacement Pipes" By Any Person Other Than The Actual Certified Installer, Otherwise You Will Be Subject To High Fines By The Us Federal Law. The 1990 Clean Air Act. (Amendments) Goes Even Further By Prohibiting Private Individuals From Installing "Converter Replacement Pipes" On Their Own Vehicles. Anyone Who Installs Such Pipes Would Violate Section 203(A)(3) And (B) 0F The Clean Air Act..
Vehicle Compatibility: To Ensure Product Accuracy You Must Use Our Compatibility Feature On Top Left Corner Of This Page, To Determine Whether This Part Is Compatible With Your Vehicle..
Features
- NON-CARB COMPLIANT: WE DO NOT SHIP TO CALIFORNIA & NEW YORK. NOT LEGAL FOR USE IN CALIFORNIA & NEW YORK, USA. THIS PRODUCT WILL NOT PASS THE CALIFORNIA OR NEW YORK EMISSION TEST.
- VEHICLE COMPATIBILITY: TO ENSURE PRODUCT ACCURACY YOU MUST USE OUR COMPATIBILITY FEATURE ON TOP LEFT CORNER OF THIS PAGE, TO DETERMINE WHETHER THIS PART IS COMPATIBLE WITH YOUR VEHICLE.
- PO420/PO430 CODE/CHECK ENGINE: THERE IS NO GUARANTEE THAT REPLACING THE CONVERTER WILL KEEP A FAULT CODE/ENGINE LIGHT FROM COMING BACK. IF AN ENGINE PERFORMANCE ISSUES EXIST, AND IT HAS NOT BEEN REPAIRED, THE PO420/PO430 FAULT CODE MAY REOCCUR.
- UNDER FEDERAL LAW: CATALYTIC CONVERTER MAY NOT BE REMOVED AND REPLACED WITH CONVERTER REPLACEMENT PIPES BY ANY PERSON OTHER THAN THE ACTUAL CERTIFIED INSTALLER, OTHERWISE YOU WILL BE SUBJECT TO HIGH FINES BY THE US FEDERAL LAW. THE 1990 CLEAN AIR ACT. (AMENDMENTS) GOES EVEN FURTHER BY PROHIBITING PRIVATE INDIVIDUALS FROM INSTALLING CONVERTER REPLACEMENT PIPES ON THEIR OWN VEHICLES. ANYONE WHO INSTALLS SUCH PIPES WOULD VIOLATE SECTION 203(A)(3) AND (B) 0F THE CLEAN AIR ACT.
- AFTERMARKET CATALYTIC CONVERTERS: KINDLY NOTE, THESE PRODUCTS ARE AFTERMARKET PRODUCTS, THEREFORE, THEY WILL NOT APPEAR AS THE ORIGINAL STOCK OEM PARTS.
- See more on Amazon...
Brand: ROYAL EXHAUST | Manufacturer: Royal Exhaust
Dimensions: 6.00 x 36.00 x 6.00 inches | Weight: 12.00 Pounds
Warranty: 2 years
See On Amazon Similar To Catalytic Converter replacement for toyota
#1
Offset Oxygen Sensor Socket, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Cars
Asin: B0BBLNG7MW
Features: 7/8" (22Mm) Socket Fits Most Oxygen Sensors, Works With Any 3/8" Drive Ratchet Or Breaker Lever, Offset Drive Gate With Wire Links The Sensor From The Side To Prevent Damage To The Wires..
What You Get: 1 X Offset Oxygen Sensor Socket. This Product Is Sure To Meet Your Requirements. If You Have Any Questions, Please Contact Us In Time, We Will Reply You Within 24 Hours..
Function: This Oxygen Sensor Is Very Convenient To Use, The Sensor Is In The Harshest Environments And May Need To Remove Some Elbow Grease, This Quality Tool Will Save You Time! To Help Your Car's Emissions And Fuel Consumption..
Design: The Socket Has A Slotted Design. So You Remove The Oxygen Sensor With The Harness Still Connected. This 3/8" Drive Oxygen Sensor Socket Is Also Offset And Compact, Providing Extra Leverage Even In Hard-To-Reach Locations..
Features
- PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function. The tool meets and exceeds ANSI/ASME standards.
- DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8 drive oxygen sensor socket is also offset and compact, providing extra leverage even in hard-to-reach locations.
- FEATURES: 7/8 (22mm) socket fits most oxygen sensors, works with any 3/8 drive ratchet or breaker lever, offset drive gate with wire links the sensor from the side to prevent damage to the wires.
- FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this quality tool will save you time! to help your car's emissions and fuel consumption.
- WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time, we will reply you within 24 hours.
- See more on Amazon...
Brand: YOGEIER | Manufacturer: YOGEIER
Dimensions: 3.94 x 3.94 x 3.94 Inches
See On Amazon #2
A ABIGAIL 5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool
Asin: B07KT1GR7V
【Package】1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
【Service】100% Satisfaction Guarantee, If You Have Any Issues With The Oxygen Sensor Socket Wrench And Thread Chaser Set, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Material】 Made From High Performance Chrome Molybdenum And Solid Cast Steel Construction For Strength And Durability - Finished With Black Oxide To Prevent Rust..
【Use】 Built For Use With Ratchets And Breakers Bars To Remove And Install Oxygen Sensors And Hex Vacuum Switches On Vehicle, Even If You Don't Have A Lot Of Experience Working With Cars. This High Quality Tool Can Save Your Time!.
Features
- Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- Package 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
- Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- Service 100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
See On Amazon #3
2PCS Car Exhaust Gasket, Ultra Seal 2-Bolt 2.5-Inch Exhaust Flange Gasket Standard Exhaust Gasket, Reinforced High Temperature Gasket Exhaust Flange Gasket Car Accessories (2.5in)
Asin: B0CMQWJX8K | Model: 2.5in | PartNumber: 2.5in
【Effective Sealing】:Exhaust Flange Gaskets Have Excellent Sealing Performance To Ensure That Exhaust Gases Do Not Leak, And Also Help To Reduce Engine Noise And Improve Fuel Efficiency, Thus Keeping The Engine Working Efficiently And Extending The Service Life Of The Engine Cylinder Head..
【Easy Installation】:Package Includes 2X Muffler Gaskets, Quick And Easy To Install; Place The Muffler Gasket On The Connector, Align The Piston Holes, Make Sure The Screw Holes Are Lined Up With The Exhaust Pipe Threaded Holes, And Slowly Tighten The Nut To Ensure The Gasket Is Secure..
【Widely Application】:The Exhaust Gaskets Are Widely Used For Piping Connections For Exhaust, Turbochargers, Mufflers, And Other Equipment. Suitable For Most Exhaust Pipe Sealing Uses..
【Premium Material】:In This Car Exhaust Gasket, The Upper And Lower Layers Are Galvanized Sheets, And The Middle Is Graphite Asbestos, High Temperature, High Pressure, Wear-Resistant, Anti-Rust And Anti-Corrosion, Sturdy, To Ensure Long Service Life..
Features
- Buyer's Guide : The car exhaust gasket size is 5.86"L x 3.39"W x 0.08"H, 2.51" ID. The longest distance between the two holes is 5.11in, and the shortest is 3.34in. Please check carefully if our gaskets fit your car before purchasing.
- Premium Material :In this car exhaust gasket, the upper and lower layers are galvanized sheets, and the middle is graphite asbestos, high temperature, high pressure, wear-resistant, anti-rust and anti-corrosion, sturdy, to ensure long service life.
- Effective Sealing :Exhaust flange gaskets have excellent sealing performance to ensure that exhaust gases do not leak, and also help to reduce engine noise and improve fuel efficiency, thus keeping the engine working efficiently and extending the service life of the engine cylinder head.
- Widely Application :The exhaust gaskets are widely used for piping connections for exhaust, turbochargers, mufflers, and other equipment. Suitable for most exhaust pipe sealing uses.
- Easy Installation :Package includes 2x muffler gaskets, quick and easy to install; Place the muffler gasket on the connector, align the piston holes, make sure the screw holes are lined up with the exhaust pipe threaded holes, and slowly tighten the nut to ensure the gasket is secure.
- See more on Amazon...
Brand: JOYCOURT | Manufacturer: JOYCOURT
Dimensions: 0.08 x 5.33 x 3.39 inches
See On Amazon #4
OYEAUTO Mass Air Flow Sensor 22204-22010 Compatible With Toyota 02-06 Camry 03-08 Corolla 01-10 Highlander 00-07 4Runner 99-10 Tacoma 3.4L 4.0L 01-05 RAV4 Lexus ES300/RX300 3.0L
Asin: B08Y6NHM5K | Model: OYEMF505 | PartNumber: OYEMF505 | Ean: 0791259313729 | UPC: 791259313729
Durability Matters,So Oyeauto Maf Sensor Uses High-Quality High Quality Material And New Technologie To Meet Oem Specifications.Fast Response Time: 15 Ms,Oupt Curver Tolerance: < 2%.Clear And Stable Signal,100% Computer-Tested To Ensure The Ecu Receives Accurate Airflow Readings Under Hard Engine Conditions..
12-Month-Warranty:During The Warranty,If There Is Any Problem With Your Maf Sensor,Please Contact Us,We Will Refund Or Send You A Brand New Replacement..
The Sensor Is Very Easy To Install,You Can Complete The Replacement In 10 Minutes.Disconnect The Ground Wire From The Battery To Reset The Warning Light.The Warning Light Disappears And The Vehicle Runs Smoothly.$20 To Solve The $200 Repair Fee..
Designed And Developed To Improve Engine Performance,Possess Excellent Thermal Stability,And Increase Fuel Efficiency.Clear And Stable Signal,100% Computer-Tested To Ensure The Ecu Receives Accurate Airflow Readings Under Hard Engine Conditions..
Features
- ReplacesOE#:22204-07010,222040C020,22204-0D030,22204-22010,336-05231,336-60525,336-60557,3848619061,74-50009,AF10029,MAS0267,MF4228N,5S2748,86138,MF4226N,19762,MF20129,MAS0313,FDM760,MAS0275,8ET009142-931,197-6030,213-3424,220129M,840-951,1380084E00000,22204-0L010,1380084E00.Please compare the original sensor on your car with the picture sensor to make sure you buy the correct one,or you can check the year make model by amazon confirmedfit to make sure the sensor fit your car.
- Designed and developed to improve engine performance,possess excellent thermal stability,and increase fuel efficiency.Clear and stable signal,100% computer-tested to ensure the ECU receives accurate airflow readings under hard engine conditions.
- Durability matters,so OYEAUTO maf sensor uses high-quality high quality material and new technologie to meet OEM specifications.Fast Response Time: 15 ms,Oupt Curver Tolerance: < 2%.Clear and stable signal,100% computer-tested to ensure the ECU receives accurate airflow readings under hard engine conditions.
- The sensor is very easy to install,you can complete the replacement in 10 minutes.Disconnect the ground wire from the battery to reset the warning light.The warning light disappears and the vehicle runs smoothly.$20 to solve the $200 repair fee.
- 12-month-warranty:During the warranty,if there is any problem with your maf sensor,please contact us,we will refund or send you a brand new replacement.
- See more on Amazon...
Brand: OYEAUTO | Manufacturer: OYEAUTO
See On Amazon #5
Walker 35944 Exhaust System Hanger
Asin: B001AX9WGY | Model: 35944 | PartNumber: 35944 | Ean: 0086387359443 | UPC: 086387359443
Keeps Exhaust Parts In Place -- Designed To Support Undercar Exhaust Components.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Available In Different Sizes -- Offered In A Variety Of Styles And Sizes For A Quality Vehicle Repair.
Premium Materials -- Made From Quality Steel For Durability And Long Life.
Oe Design -- Designed With Oe-Style Features For Easy Installation.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Universal fit, check product dimensions
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components
- OE DESIGN -- Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS -- Made from quality steel for durability and long life
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
First Available: 12/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 0.80 x 9.50 x 1.00 inches | Weight: 0.50 Pounds
Warranty: No Warranty
See On Amazon #6
Walker Exhaust 35129 Exhaust Bolt and Spring
Asin: B000CQBG1O | Model: 35129 | PartNumber: 35129 | Ean: 0086387351294, 0882852003176 | UPC: 086387351294, 882852003176
Keeps Exhaust Parts In Place -- Designed To Support Undercar Exhaust Components.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Premium Materials -- Made From High-Quality Materials For Durability And Long Life.
The Right Connection -- Designed To Be Used For Ball And Socket Joint.
Consistent Performance -- Spring Designed With The Right Compression Strength For A Secure Connection.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2013-2013 Subaru XV Crosstrek; 2014-2014 Subaru XV Crosstrek; 2015-2015 Subaru XV Crosstrek; 2016-2016 Subaru Crosstrek; 1999-1999 Subaru Forester; 2000-2000 Subaru Forester; 2001-2001 Subaru Forester; 2002-2002 Subaru Forester; 2006-
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components
- CONSISTENT PERFORMANCE -- Spring designed with the right compression strength for a secure connection
- PREMIUM MATERIALS -- Made from high-quality materials for durability and long life
- THE RIGHT CONNECTION -- Designed to be used for ball and socket joint
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
First Available: 12/22/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 1.50 x 3.50 x 3.00 inches | Weight: 0.42 Pounds
Warranty: No Warranty
See On Amazon #7
Zlirfy 5PCS Oxygen Sensor Removers,Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set,O2 Oxygen Sensor Socket Set for Removing and Install Oxygen Sensors,Hex Vacuum Switches
Asin: B0C6DVR5LK | Model: 533YCGQCXTZ001 | PartNumber: 533YCGQCXTZ001
[Features] Special Side Cut Design Allows For Easy Access To The Oxygen Sensor From Any Part And Prevents Damage To The Wires..
[Applicable] The Oxygen Sensor Sleeve Kit Is Perfect For Removing, Inspecting, Replacing, And Installing Heated And Non Heated Oxygen Sensors And Vacuum Switches On Most Vehicles Equipped With Computer-Controlled Engines..
[Convenient Storage] The Disassembly Tool For The Automotive Oxygen Sensor Socket Wrench Is Equipped With A Storage Box, Which Can Protect The Tool Well During Transportation And Allow You To Keep The Tool Well After Use..
[Package Includes] 1 Piece Of 3/8 "Dr. Ultra Deep Drawing Knife Socket (3-1/8" Long), 1 Piece Of 3/8 "Dr. Thin Crowbar Socket Wrench (1-1/4" Long), 1 Piece Of 1/2 "Dr. Offset Crowbar Socket Wrench (1-15/16" Long), And 1 Piece Of M18 X 1.5Mm And 1 Piece Of M12 X 1.25Mm Threaded Groove With 3/8 "Driver For Cleaning And Repairing Damaged Threads..
Features
- [High Quality Material] Made of high-strength chromium vanadium steel. Please rest assured that our products are sturdy enough to install and remove oxygen sensors. The outer layer is protected from oxidation and rust through phosphating and electroplating, extending its service life.
- [Package Includes] 1 piece of 3/8 Dr. ultra deep drawing knife socket (3-1/8 long), 1 piece of 3/8 Dr. thin crowbar socket wrench (1-1/4 long), 1 piece of 1/2 Dr. offset crowbar socket wrench (1-15/16 long), and 1 piece of M18 x 1.5mm and 1 piece of M12 x 1.25mm threaded groove with 3/8 driver for cleaning and repairing damaged threads.
- [Features] Special side cut design allows for easy access to the oxygen sensor from any part and prevents damage to the wires.
- [Convenient Storage] The disassembly tool for the automotive oxygen sensor socket wrench is equipped with a storage box, which can protect the tool well during transportation and allow you to keep the tool well after use.
- [Applicable] The oxygen sensor sleeve kit is perfect for removing, inspecting, replacing, and installing heated and non heated oxygen sensors and vacuum switches on most vehicles equipped with computer-controlled engines.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #8
OYEAUTO Mass Air Flow Sensor Meter MAF Compatible With 07-17 Camry 09-18 Corolla 06-18 Rav4 07-12 ES350 07-12 RX350
Asin: B0B4FMZ2FP | Ean: 0752356927523 | UPC: 752356927523
Simple Installation,You Can Complete The Replacement In 10 Minutes By Yourself,$20 To Solve The $200 Repair Fee..
12-Month-Warranty:During The Warranty,If There Is Any Problem With Your Maf Sensor,Please Contact Us,We Will Refund You Or Send You A Brand New Replacement..
All Maf Sensor Are 100% Tested With Automated Computerized Test Equipment To Ensure Functionality And Reliable..
Replacement Maf Sensor Fits For 10-21 4Runner 4.0L,05-18 Avalon 3.5L,07-17 Camry,09-18 Corolla,10-14 Fj Cruiser 4.0L,06-18 Rav4,09-17 Highlander,10-14 Prius,07-16 Sienna 3.5L,09-15 Venza;For 10-12 Hs250h 2.4L,11-17 Ct200h 1.8L,13-17 Es300h 2.5L,07-17 Es350 3.5L,08-14 Is F 5.0L,06-15 Is250 2.5L,16-17 Is300,06-17 Is350 3.5L,07-17 Gs350 3.5L,13-18 Gs450h 3.5L,07-15 Rx350 3.5L,10-14 Rx450h 3.5L;For 07-14 Tc 2.4L,08-15 Xb,08-14 Xd 1.8L..
Features
- OE Number:197-6110,1976110,197400-5150,15J08,22204-0H010,22204-31020,22204-31010,13800-54L00,19204726,197-6160,2134300,22204-0T020,22204-0T040,22204-0V010,22204-0V020,22204-28010,22204-37010,22680AA400,74-50073,88975816,DL-3096,MA1144,MA192,MA320,MAF20160,MAS0314,MF21359N,MQ6279,SU003-00427,XTP450073.
- Replacement MAF Sensor fits for 10-21 4Runner 4.0L,05-18 Avalon 3.5L,07-17 Camry,09-18 Corolla,10-14 FJ Cruiser 4.0L,06-18 RAV4,09-17 Highlander,10-14 Prius,07-16 Sienna 3.5L,09-15 Venza;for 10-12 HS250h 2.4L,11-17 CT200h 1.8L,13-17 ES300h 2.5L,07-17 ES350 3.5L,08-14 IS F 5.0L,06-15 IS250 2.5L,16-17 IS300,06-17 IS350 3.5L,07-17 GS350 3.5L,13-18 GS450h 3.5L,07-15 RX350 3.5L,10-14 RX450h 3.5L;for 07-14 tC 2.4L,08-15 xB,08-14 xD 1.8L.
- Simple installation,you can complete the replacement in 10 minutes by yourself,$20 to solve the $200 repair fee.
- All maf sensor are 100% tested with automated computerized test equipment to ensure functionality and reliable.
- 12-month-warranty:During the warranty,if there is any problem with your maf sensor,please contact us,we will refund you or send you a brand new replacement.
- See more on Amazon...
Brand: OYEAUTO | Manufacturer: OYEAUTO
See On Amazon #9
Spicer 5-153X U-Joint Kit 1310 Series (OSR)
Asin: B000CKN762 | Model: 5153X | PartNumber: 5153X | Ean: 0023913121051, 0725975115138, 0698231256527 | UPC: 725975115138, 023913121051, 698231256527
1310 Series.
Bearing Cap To Bearing Cap: 3.219 Inches.
Bearing Cap Diameter: 1.062 Inches.
Outside Snap Ring Style (Osr).
Features
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
- See more on Amazon...
First Available: 09/03/2013
Brand: Spicer | Manufacturer: Dana
Dimensions: 1.30 x 3.70 x 3.70 inches | Weight: 1.00 pounds
See On Amazon #10
Castrol Edge High Mileage 0W-20 Advanced Full Synthetic Motor Oil, 5 Quarts
Asin: B092LJ4ZXN | Model: 15B0D2 | PartNumber: 15B0D2 | Ean: 0079191212769 | UPC: 079191212769
6X Better Wear Protection, As Measured In Latest Sequence Iva Engine Test.
Meets Ilsac Gf-6 To Prevent Low Speed Pre Ignition (Lspi) And Timing Chain Wear Protection.
1.4X Better Sludge Protection, As Measured In Sequence Vh Engine Test Vs. Api Sp Test Limit.
10X Better High Temperature Performance, As Measured In Sequence Iiih Engine Test Vs. Api Sp Test Limit.
Features
- Patented Phosphorus Replacement Technology to help extend the life of your emission system
- 10X better high temperature performance, as measured in Sequence IIIH engine test vs. API SP test limit
- 6X better wear protection, as measured in latest Sequence IVA engine test
- 1.4X better sludge protection, as measured in Sequence VH engine test vs. API SP test limit
- Meets ILSAC GF-6 to prevent low speed pre ignition (LSPI) and timing chain wear protection
- See more on Amazon...
Brand: Castrol | Manufacturer: Castrol
Warranty: 3 months
See On Amazon #11
DURATECH O2 Oxygen Sensor Socket 3/8" Drive x 7/8"(22mm), Cr-V Oxygen Sensor Remover Tool with Side Wire Gate, O2 Removal and Installation Universal Sensor Socket
Asin: B0CF8M9DJ3 | Ean: 0820909796688 | UPC: 820909796688
Side Wire Gate: The O2 Sensor Removal Tool Is Designed With A Side Wire Gate. It Is Wide Enough To Pass Through The Wire Without Damaging It. This Kind Of Design Allows You To Remove The Oxygen Sensor While Still Connecting The Wire Harness, Which Is Both Convenient And Safe..
Wide Application: This O2 Sensor Remover Is Suitable For Most Cars, You Can Use It To Disassemble, Replace And Clean The Car Oxygen Sensor To Help Reduce Your Car's Emissions And Fuel Consumption. (Attention: Due To The Different Positions Of Oxygen Sensors In Different Cars, For Some Oxygen Sensors Our Product May Not Be Convenient To Operate, Please Confirm The Suitability Before Purchasing.).
Anti-Slip Slotts: The Square Hole Of This Socket Has A Unique Slotted Design. The Four Small Slots Have A Good Anti-Slip Effect, Which Can Help To Hold The Ratchet Firmly, Making You More Secure When Using The Oxygen Sensor Tool..
Premium Material: This Oxygen Sensor Socket Is Made Of High Quality Cr-V Steel, Meets And Exceeds Ansi/Asme Standards. It Has Surface Phosphating To Improve Oxidation And Corrosion Resistance, And Heat Treatment To Improve Material Performance And Make It More Durable..
Features
- Product Size: The O2 sensor socket has a standard 6-point shape. The socket size is 22mm/(7/8"), which can fit most oxygen sensors. The square hole size is 10mm/(3/8"), suitable for 3/8" drive ratchet or breaker bar.
- Premium Material: This oxygen sensor socket is made of high quality Cr-V steel, meets and exceeds ANSI/ASME standards. It has surface phosphating to improve oxidation and corrosion resistance, and heat treatment to improve material performance and make it more durable.
- Side Wire Gate: The O2 sensor removal tool is designed with a side wire gate. It is wide enough to pass through the wire without damaging it. This kind of design allows you to remove the oxygen sensor while still connecting the wire harness, which is both convenient and safe.
- Anti-slip Slotts: The square hole of this socket has a unique slotted design. The four small slots have a good anti-slip effect, which can help to hold the ratchet firmly, making you more secure when using the oxygen sensor tool.
- Wide Application: This O2 sensor remover is suitable for most cars, you can use it to disassemble, replace and clean the car oxygen sensor to help reduce your car's emissions and fuel consumption. (ATTENTION: Due to the different positions of oxygen sensors in different cars, for some oxygen sensors our product may not be convenient to operate, please confirm the suitability before purchasing.)
- See more on Amazon...
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co,.LTD
See On Amazon #12
FEL-PRO MS 95088 Exhaust Manifold Gasket Set
Asin: B000C2CK5Y | Model: MS95088 | PartNumber: MS95088 | Ean: 0084113481895 | UPC: 084113481895
Validated For Fit, Form, And Function.
Unsurpassed Quality You Can Trust.
Application Specific Design To Ensure A Perfect Fit.
Features
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Validated for fit, form, and function
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 11/23/2005
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 0.50 x 12.00 x 6.00 inches | Weight: 0.02 Pounds
Warranty: Manufacturer Warranty
See On Amazon #13
FEL-PRO 6579 Fuel Pump Mounting Gasket
Asin: B000C2CCXO | Model: ERROR:#N/A | PartNumber: ERROR:#N/A | Ean: 0084113835155 | UPC: 084113835155
Engineered For The Sealing Repair Environment.
Unsurpassed Quality You Can Trust.
Application-Specific Design Ensures A Perfect Fit.
Features
- Meets or exceeds all original equipment specifications
- Application-specific design ensures a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 08/01/2006
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 Pounds
Warranty: Manufacturer Warranty
See On Amazon #14
Marsflex Oxygen O2 Sensor 234-4622 13355 Downstream Heated Compatible with Toyota Camry Avalon Sienna 4Runner RAV4 Solara Matrix Lexus ES300 Pontiac Vibe,250-24360 Replacement
Asin: B099S7DXJX | Model: 65-TRSH-P4NX | PartNumber: 65-TRSH-P4NX
Advantage: Made Of High-Quality Materials, Strong Durability, To Ensure Service Life, Marsflex O2 Sensor Can Improve Engine Performance And Fuel Economy, Extend Catalytic Converter Life..
Warranty: 1-Year Warranty. All Marsflex Oxygen Sensors Are Extensively Tested During Manufacturing To Guarantee Quality, Reliability,And Above All,Always Meet Or Exceed The Original Equipment Specifications..
Easy Installation:Marsflex Oxygen Sensor 234-4622 Total Length 16.5 Inch. Manufactured To Oe Specification Fit Form And Function, Durable And Easy Installation..
Application: Marsflex Oxygen O2 Sensor 234-4622 Compatible For Toyota Camry Hybrid 2007-2017,Camry Le 1994-1999 2004-2006 Camry Le 2.5L 2010-2017,Camry Se 1994-1996 2004-2006 Camry Se 2.5L 2010-2017,Camry Xle 1994-2000 Camry Xle 2.5L 2004-2017,Avalon Sienna 4Runner Rav4 Solara Matrix Lexus Es300 Pontiac Vibe..
Features
- Cautions: Please check your vehicle fitment carefully in the product description to avoid any wrong purchase.Please check your part pictures with our pictures, especially the plug, it must be completely same. Or it will not fit your car.
- Application: Marsflex Oxygen O2 Sensor 234-4622 Compatible for Toyota Camry Hybrid 2007-2017,Camry LE 1994-1999 2004-2006 Camry LE 2.5L 2010-2017,Camry SE 1994-1996 2004-2006 Camry SE 2.5L 2010-2017,Camry XLE 1994-2000 Camry XLE 2.5L 2004-2017,Avalon Sienna 4Runner RAV4 Solara Matrix Lexus ES300 Pontiac Vibe.
- Advantage: Made of high-quality materials, strong durability, to ensure service life, Marsflex O2 Sensor can improve engine performance and fuel economy, extend Catalytic Converter life.
- Easy Installation:Marsflex oxygen sensor 234-4622 total length 16.5 inch. Manufactured to OE specification fit form and function, durable and easy installation.
- Warranty: 1-YEAR WARRANTY. ALL Marsflex oxygen sensors are extensively tested during manufacturing to guarantee quality, reliability,and above all,always meet or exceed the original equipment specifications.
- See more on Amazon...
Brand: Marsflex | Manufacturer: Marsmotor
Dimensions: 2.17 x 5.91 x 2.17 inches
See On Amazon #15
BELOMI Oxygen Sensor Socket with Side Wire Cutout, 3/8 Inch Drive x 0.39 Inch (12mm) 6-Point fits All Vehicle O2 Removal and Installation, 65 Mn Steel Universal Puller Oxygen Sensor Socket (Large)
Asin: B0CCNQPS5W | Model: Oxygen Sensor Socket | PartNumber: Oxygen Sensor Socket
【Use】: Our Oxygen Sensor Socket Is Used For Removing And Installing Oxygen Sensors And Hexagonal Vacuum Switches On Cars, It Can Be Used With Ratchet Wrenches And Disconnecting Pliers, Suitable For O2 Removal And Installation On All Vehicles, Very Easy To Use, And It Can Provide Great Convenience For You..
【Service】: You Can Buy With Confidence. Made Of Selected Materials And Careful Craftsmanship, It Is The Ideal Oxygen Sensor Removal Tool. The Goods Are Strictly Inspected Before Shipment, There Are No Errors In Specifications Or Functionality, Provides You With An Excellent Using Experience..
【Design】: Standard 6-Point Slotted Design With Side Cutout To Prevent Wire Damage, Allowing You To Remove The Oxygen Sensor While Still Connecting The Wiring Harness. The Socket Is Biased To Be Compact, Providing Extra Leverage Even In Hard-To-Reach Places..
【Compatible】: Universal 6-Point 7/8 Inch (22Mm) Socket, Hexagonal Shape, Fits Almost All Oxygen Sensors With 7/8" Hex Nuts, 3/8 Inch Square Head At The Top, Can Be Used With Ratchet Wrench. Please Check The Specification Size Before You Purchase..
Features
- Material : Made of high quality 65 manganese steel, hard texture, high strength and excellent durability, will not easily deformed or broken. The black oxidized surface treatment effectively prevents rust and corrosion, can adapt to various working environments and weather conditions, long service life.
- Compatible : Universal 6-point 7/8 inch (22mm) socket, hexagonal shape, fits almost all oxygen sensors with 7/8 hex nuts, 3/8 inch square head at the top, can be used with ratchet wrench. Please check the specification size before you purchase.
- Use : Our oxygen sensor socket is used for removing and installing oxygen sensors and hexagonal vacuum switches on cars, it can be used with ratchet wrenches and disconnecting pliers, suitable for O2 removal and installation on all vehicles, very easy to use, and it can provide great convenience for you.
- Design : Standard 6-point slotted design with side cutout to prevent wire damage, allowing you to remove the oxygen sensor while still connecting the wiring harness. The socket is biased to be compact, providing extra leverage even in hard-to-reach places.
- Service : You can buy with confidence. Made of selected materials and careful craftsmanship, it is the ideal oxygen sensor removal tool. The goods are strictly inspected before shipment, there are no errors in specifications or functionality, provides you with an excellent using experience.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 1.00 x 0.50 x 0.50 inches
Warranty: 0.2
See On Amazon #16
Walker 31332 Exhaust Pipe Flange Gasket
Asin: B000CQHUJ6 | Model: 31332 | PartNumber: 31332 | Ean: 7262318519541, 7258006525376, 0882852135846, 0086387313322, 0082852135840 | UPC: 882852135846, 082852135840, 086387313322
Available In Different Sizes -- Offered In A Variety Of Styles And Sizesfora Quality Vehicle Repair.
Real-World Tested -- Parts Are Tested On-Vehicle And Validated To Ensure Optimal Performance On The Road.
Easier To Install -- Featuring Slotted Bolt Holes (Where Applicable) For Easy Installation, Gasket Slips Into Place.
Premium Materials -- Made From High-Quality Materials For Durability And Long Life.
Engineering Expertise -- Parts Are Reviewed And Validated And Approved By Walker Engineers Through Rigorous Research And Development.
Deflects Heat -- Designed To Deflect Heat For Long-Lasting Performance.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2002-2002 Suzuki Aerio; 2003-2003 Suzuki Aerio; 1999-1999 Suzuki Grand Vitara; 2000-2000 Suzuki Grand Vitara; 2001-2001 Suzuki Grand Vitara; 2002-2002 Suzuki Grand Vitara; 2003-2003 Suzuki Grand Vitara; 2004-2004 Suzuki Grand Vitara;
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizesfora quality vehicle repair
- DEFLECTS HEAT -- Designed to deflect heat for long-lasting performance
- PREMIUM MATERIALS -- Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE -- Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL -- Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 0.10 x 2.50 x 2.50 inches | Weight: 0.02 Pounds
Warranty: No Warranty
See On Amazon #17
Walker 35337 Exhaust Clamp for Ford F-150
Asin: B000C8ZACI | Model: 35337 | PartNumber: 35337 | Ean: 0086387353373 | UPC: 086387353373
Connects Exhaust Parts -- Provides A Tight Connection That Inhibits Leaks.
Premium Materials -- Made From Quality Material For Durability And Long Life.
Better Together -- Use Walker Accessories When Installing Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Available In Different Sizes -- Offered In A Variety Of Styles And Sizes For A Quality Vehicle Repair.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 1994-1994 Land Rover Discovery; 1995-1995 Land Rover Discovery; 2002-2002 Land Rover Freelander; 2003-2003 Land Rover Freelander; 2004-2004 Land Rover Freelander; 2005-2005 Land Rover Freelander; 1990-1990 Land Rover Range Rover; 1991
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- CONNECTS EXHAUST PARTS -- Provides a tight connection that inhibits leaks
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS -- Made from quality material for durability and long life
- BETTER TOGETHER -- Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
- See more on Amazon...
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 0.90 x 4.40 x 3.60 inches | Weight: 0.20 pounds
See On Amazon #18
OYEAUTO Iridium Spark Plug 4pcs Replace 7090 BKR5EGP
Asin: B0B96SG51C | Model: OYEAUTOHBKGP969 | PartNumber: OYEAUTOHBKGP969 | Ean: 0701727396994 | UPC: 701727396994
Long Life Spark Plugs Manufactured To Oem Service Interval Specifications..
12-Month-Warranty:During The Warranty,If There Is Any Problem With Your Plug,Please Contact Us,We Will Refund You Or Send You A Brand New Replacement..
Improve Fuel Economy, Better Acceleration And Faster Starts Than Other Plugs..
The Iridium Fine Wire Center Electrode's Durability Is Six Times Harder Than Platinum.Iridium Alloys Extremely High Melting Point Is Perfect For Today's Engines..
Features
- Pre-gapped and nickel plated threads allow for quick installation without adjusting the gap or applying anti-seize.Reference number:AP3924,xp3924,xp3923,APP3923,AP3923,Ap5224,APP5224,3199,3297,3764,4503,4644,6418,7100,7938,7092,9600,9603,9652,9651,9607,9610,PK16TT,BKR5E,BKR6E,BKR6EGP,BKR6EIX,BKR7E,ZFR6FGP,90919-01220,BKR5E-11.
- The Iridium fine wire center electrode's durability is six times harder than platinum.Iridium alloys extremely high melting point is perfect for today's engines.
- Long life spark plugs manufactured to OEM service interval specifications.
- Improve fuel economy, better acceleration and faster starts than other plugs.
- 12-month-warranty:During the warranty,if there is any problem with your plug,please contact us,we will refund you or send you a brand new replacement.
- See more on Amazon...
Brand: OYEAUTO | Manufacturer: OYEAUTO
See On Amazon #19
Walker Exhaust 31540 Exhaust Pipe Flange Gasket
Asin: B000CQBFN8 | Model: 31540 | PartNumber: 31540 | Ean: 0086387315401 | UPC: 086387315401
Available In Different Sizes -- Offered In A Variety Of Styles And Sizesfora Quality Vehicle Repair.
Thickness: 0.062 / Bolt Hole Center To Bolt Hole Center 1: 4.125 / Bolt Hole Diameter: 0.375 / Port 1 Length: 2.5 / Port 1 Width: 2.5.
Real-World Tested -- Parts Are Tested On-Vehicle And Validated To Ensure Optimal Performance On The Road.
Easier To Install -- Featuring Slotted Bolt Holes (Where Applicable) For Easy Installation, Gasket Slips Into Place.
Premium Materials -- Made From High-Quality Materials For Durability And Long Life.
Engineering Expertise -- Parts Are Reviewed And Validated And Approved By Walker Engineers Through Rigorous Research And Development.
Deflects Heat -- Designed To Deflect Heat For Long-Lasting Performance.
Better Together -- Use Premium Walker Accessories When Installing Walker Catalytic Converters And Mufflers For A Complete Exhaust System Upgrade.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2014-2014 Ram ProMaster 1500; 2015-2015 Ram ProMaster 1500; 2016-2016 Ram ProMaster 1500; 2017-2017 Ram ProMaster 1500; 2014-2014 Ram ProMaster 2500; 2015-2015 Ram ProMaster 2500; 2016-2016 Ram ProMaster 2500; 2017-2017 Ram ProMaster
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizesfora quality vehicle repair
- DEFLECTS HEAT -- Designed to deflect heat for long-lasting performance
- PREMIUM MATERIALS -- Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE -- Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL -- Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- Thickness: 0.062 / Bolt Hole Center To Bolt Hole Center 1: 4.125 / Bolt Hole Diameter: 0.375 / Port 1 Length: 2.5 / Port 1 Width: 2.5
- See more on Amazon...
First Available: 11/14/2013
Brand: Walker | Manufacturer: Walker Exhaust
Dimensions: 0.60 x 5.20 x 3.80 inches | Weight: 0.01 Pounds
Warranty: No Warranty
See On Amazon #20
MAS Ignition Coil Pack UF303 E255 Replacement compatible with Chevy Trailblazer Colorado Buick Rainier GMC Canyon Envoy Hummer H3 Isuzu Olds Saab L4-2.8L L5-3.5L L6-4.2L (1)
Asin: B08142K9V1 | Model: DQ50164 UF303 | PartNumber: DQ50164 UF303
Compatible With Oem Numbers - Uf-303, 28310, 28315, 1788390, Ic051218, Uf303t, D502a, 521743, Dr1707, 5073, 1C414, Hpuf303, Uf-303, 11173596, C303, 12114, Uf303g, Ltr5gp, 5019, Bruf303, B349x11, E255, Ic414, 12568062, E255, 52-1743, Gn10114, Ic414, 12568062, Uf-303, 19300921, Dw01659, 8-12568-062-0..
1 Year Limited Warranty - This Ignition Coil Set Comes Complete With A 1 Year Warranty. If The Coil Ever Fails On Your Vehicle Within The Warranty Period, Simply Contact Us For A Replacement. Save Time And Money By Taking Advantage Of This Warranty..
To Keep Longer Use Time Of The Ignition Coils, Please Pay Attention To The Condition Of Sparks.The Ignition Coils Need To Work More Frequently When Work Together With The Aged Spark,That Will Get The Ignition Coils Become Easy To Overload And Aged..
Reduces Common Ignition Coil Issues Such As; No/Hard Start, Long Crank Time, Misfires, Lack Of Power, Inconsistent Transmission Shifts, Spark Plug Fouling, Premature Catalytic Converter Failure, Poor Fuel Economy, Check Engine Light Illumination.
Features
- COMPATIBLE VEHICLES - Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase
- Reduces common ignition coil issues such as; no/hard start, long crank time, misfires, lack of power, inconsistent transmission shifts, spark plug fouling, premature catalytic converter failure, poor fuel economy, check engine light illumination
- COMPATIBLE WITH OEM NUMBERS - UF-303, 28310, 28315, 1788390, IC051218, UF303T, D502A, 521743, DR1707, 5073, 1C414, HPUF303, UF-303, 11173596, C303, 12114, UF303G, LTR5GP, 5019, BRUF303, B349X11, E255, Ic414, 12568062, E255, 52-1743, GN10114, IC414, 12568062, UF-303, 19300921, DW01659, 8-12568-062-0.
- To keep longer use time of the ignition coils, please pay attention to the condition of sparks.The ignition coils need to work more frequently when work together with the aged spark,that will get the ignition coils become easy to overload and aged.
- 1 Year Limited Warranty - This ignition coil set comes complete with a 1 year warranty. If the coil ever fails on your vehicle within the warranty period, simply contact us for a replacement. Save time and money by taking advantage of this warranty.
- See more on Amazon...
Brand: MAS | Manufacturer: MAS
See On Amazon
Looking For Something Else?
Search