TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Quart, Cold Weather)
Asin: B01K7WP1X6 | Ean: 0811932022288 | UPC: 811932022288
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Clear Low Viscosity Resin With Many Uses: Use On All Softwoods, Including Cedar, Cypress, Fir, Pine And Redwood. Use On All Hardwoods, Including Ipe, Mahogany, Maple, Oak, And Teak. Use On Butcher Block, Live Edge Slabs, Particle Board, Plywood, And Osb.
Choose The Right Epoxy Kit Size For Your Project: Both Formulas Are Available In Pint, Quart, Half-Gallon, And Gallon Sizes. Simple 2 Parts Resin To 1 Part Hardener Mix Ratio For Reliable Results Every Time. Easy Cleanup With Soap And Water.
Wood Rot Repair Epoxy Available In Two Formulas: Choose Regular Formula Penetrating Epoxy For 65-90 Degrees F Temps; Choose Cold Weather Penetrating Epoxy For 40-65 Degrees F Temps (Do Not Use Cold Weather Formula Above 65 F).
Penetrating Wood Sealer: An Ideal Dry Rot Treatment; This Marine-Grade Epoxy Resin Is Perfect For Wooden Boat Restoration, Wood Repairs, And Woodworking Projects. Seal Bare Or New Wood To Protect Against Damage.
Features
- WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes
- PENETRATING WOOD SEALER: An ideal dry rot treatment; this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage
- CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB
- WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps; Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F)
- CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 1.00 pounds
See On Amazon Similar To TotalBoat Clear Penetrating Epoxy Wood
#1
TotalBoat Table Top Epoxy Resin 1 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
Asin: B00S9QJIY6 | Model: TB-9335 | PartNumber: TB-9335 | Ean: 0811932021441, 0811932020765 | UPC: 811932020765, 811932021441
2 Part Epoxy Is Easy To Use: Just Mix 1 Part Resin To 1 Part Hardener, Stir Thoroughly, And Pour On Your Prepared Surface; The Epoxy Will Level On Its Own And Cure At Room Temperature; Maximum Pour Depth Per Layer Is 1/8" - 1/4".
1 Gallon Epoxy Kit Includes 1/2 Gallon Of Resin & 1/2 Gallon Of Hardener; Application Temperature: 70-80°F; Working Time: 20 Min. @ 70°F; Recoat Time: 4-8 Hrs; Cure Time: 16-20 Hrs @ 70°F; Coverage: 12.8 Sq Ft At 1/8" Thick; Store At 60-90°F.
No Vocs, Low Odor, Bpa-Free: No Harsh Fumes - Ideal For Indoor Or Shop Use With Adequate Ventilation And Proper Ppe; All Ingredients In This Food Safe Epoxy Resin Are On The Usda Approved List For Contact With Food, Once Cured; 100% Made In The Usa.
Epoxy Resists Scratches, Stains And Yellowing: Self-Leveling Formula Cures To A Finish As Smooth As Glass; Use This Versatile Diy Resin On Wood, Concrete, Ceramic, Stainless Steel And More; 100% Waterproof Upon Cure.
Features
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8 - 1/4
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 1 GALLON EPOXY KIT includes 1/2 gallon of resin & 1/2 gallon of hardener; application temperature: 70-80 F; working time: 20 min. @ 70 F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70 F; coverage: 12.8 sq ft at 1/8 thick; store at 60-90 F
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 10.00 x 7.00 x 5.00 inches | Weight: 9.30 pounds
See On Amazon #2
TotalBoat Table Top Epoxy Resin 2 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
Asin: B07PYVYXNL | Model: 519708 | PartNumber: 519708 | Ean: 0811932024299 | UPC: 811932024299
2 Part Epoxy Is Easy To Use: Just Mix 1 Part Resin To 1 Part Hardener, Stir Thoroughly, And Pour On Your Prepared Surface; The Epoxy Will Level On Its Own And Cure At Room Temperature; Maximum Pour Depth Per Layer Is 1/8" - 1/4".
2 Gallon Epoxy Kit Includes 1 Gallon Of Resin & 1 Gallon Of Hardener; Application Temperature: 70-80°F; Working Time: 20 Min. @ 70°F; Recoat Time: 4-8 Hrs; Cure Time: 16-20 Hrs @ 70°F; Coverage: 12.8 Sq Ft Per Gallon At 1/8" Thick; Store At 60-90°F.
No Vocs, Low Odor, Bpa-Free: No Harsh Fumes - Ideal For Indoor Or Shop Use With Adequate Ventilation And Proper Ppe; All Ingredients In This Food Safe Epoxy Resin Are On The Usda Approved List For Contact With Food, Once Cured; 100% Made In The Usa.
Epoxy Resists Scratches, Stains And Yellowing: Self-Leveling Formula Cures To A Finish As Smooth As Glass; Use This Versatile Diy Resin On Wood, Concrete, Ceramic, Stainless Steel And More; 100% Waterproof Upon Cure.
Features
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8 - 1/4
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 2 GALLON EPOXY KIT includes 1 gallon of resin & 1 gallon of hardener; application temperature: 70-80 F; working time: 20 min. @ 70 F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70 F; coverage: 12.8 sq ft per gallon at 1/8 thick; store at 60-90 F
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 6.00 Pounds
See On Amazon #3
TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Quart, Traditional)
Asin: B00J36WRV2 | Model: 403795 | PartNumber: 403795 | Ean: 0811932020741 | UPC: 811932020741
Clear Low Viscosity Resin With Many Uses: Use On All Softwoods, Including Cedar, Cypress, Fir, Pine And Redwood. Use On All Hardwoods, Including Ipe, Mahogany, Maple, Oak, And Teak. Use On Butcher Block, Live Edge Slabs, Particle Board, Plywood, And Osb.
Choose The Right Epoxy Kit Size For Your Project: Both Formulas Are Available In Pint, Quart, Half-Gallon, And Gallon Sizes. Simple 2 Parts Resin To 1 Part Hardener Mix Ratio For Reliable Results Every Time. Easy Cleanup With Soap And Water.
Wood Rot Repair Epoxy Available In Two Formulas: Choose Regular Formula Penetrating Epoxy For 65-90 Degrees F Temps; Choose Cold Weather Penetrating Epoxy For 40-65 Degrees F Temps (Do Not Use Cold Weather Formula Above 65 F).
Penetrating Wood Sealer: An Ideal Dry Rot Treatment; This Marine-Grade Epoxy Resin Is Perfect For Wooden Boat Restoration, Wood Repairs, And Woodworking Projects. Seal Bare Or New Wood To Protect Against Damage.
Features
- WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes
- PENETRATING WOOD SEALER: An ideal dry rot treatment; this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage
- CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB
- WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps; Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F)
- CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #4
TotalBoat 5:1 Epoxy Resin Kit (Gallon, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair
Asin: B00HR8515C | Model: TB-521KITSB-K | PartNumber: TB-521KITSB-K | Ean: 0811932021021 | UPC: 811932021021
Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75°F For Fast Hardener, To 20 Minutes @ 75°F For Slow Hardener.
Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin, Hardener, Calibrated Pumps, Mixing Sticks And Mixing Cups. Compatible With Other 5:1 Epoxy Resin Systems.
Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating. Combine With Fillers To Make A High-Strength Fairing Compound, Filleting Material, Or Adhesive.
Features
- Premium Epoxy Kits Include Enough 5:1 Marine Epoxy Resin And Hardener To Complete A Variety Of Boat Building, Composite Construction, And Epoxy Repair Projects. For Use On Wood, Fiberglass, Reinforcement Fabrics, Etched Aluminum, Bare Steel, And Lead. Not Suitable For Clear-Coating Applications
- Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating. Combine With Fillers To Make A High-Strength Fairing Compound, Filleting Material, Or Adhesive
- Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75 F For Fast Hardener, To 20 Minutes @ 75 F For Slow Hardener
- Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin, Hardener, Calibrated Pumps, Mixing Sticks And Mixing Cups. Compatible With Other 5:1 Epoxy Resin Systems
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 15.00 x 10.00 x 8.00 inches
See On Amazon #5
TotalBoat-497712 Halcyon Marine Varnish (Gloss, Quart) | Water-Based Polyurethane Wood Finish | Clear Gloss UV Protection for Interior and Outdoor Use
Asin: B071WXFL32 | Ean: 0811932023285 | UPC: 811932023285
Easy To Apply, Easy To Clean Up: Spar Urethane Is Easy To Apply By Brushing, Rolling Or Spraying; Looks Milky-White At First, But Cures To A Clear Or Clear Amber Color, Depending On Formula; For A Satin Finish, Use Gloss For Build Coats And Satin For Finish Coat; Easy Soap & Water Cleanup.
Choose Finish And Color: Gloss Finish Comes In Clear Or Amber Colors; Satin Finish Comes In Clear Only; Kit Sizes: Pint, Quart And 4 Quart; Coverage: 40-50 Sq Ft/Pint; 80-100 Sq Ft/Quart; Note: Halcyon Satin Is Not Available In A 4 Quart Kit.
Finish Varnish Jobs Faster: Dries Fast So You Can Finish Faster Than With Traditional Varnishes; Apply Up To 5 Coats In A Day, No Sanding Between Coats; Apply At Least 2-4 Heavy Coats For Interior Applications; 4-6 Coats For Exterior Applications.
Protects Against Damage From Sun And Weather: Provides Superior Sun-Blocking Protection And Maximum Resistance To Salt, Abrasion And Scratches; Excellent Adhesion And Flexibility Let Wood Expand & Contract Naturally, Without Cracking Or Peeling.
Features
- DURABLE MARINE-GRADE VARNISH cures to a hard gloss or satin finish for beautiful brightwork; for interior and exterior use on wood trim, toerails, cockpits, doors, cabinets, chairs, outdoor furniture and more - on your boat or at home
- PROTECTS AGAINST DAMAGE FROM SUN AND WEATHER: Provides superior sun-blocking protection and maximum resistance to salt, abrasion and scratches; excellent adhesion and flexibility let wood expand & contract naturally, without cracking or peeling
- EASY TO APPLY, EASY TO CLEAN UP: Spar urethane is easy to apply by brushing, rolling or spraying; looks milky-white at first, but cures to a clear or clear amber color, depending on formula; for a satin finish, use gloss for build coats and satin for finish coat; easy soap & water cleanup
- FINISH VARNISH JOBS FASTER: Dries fast so you can finish faster than with traditional varnishes; apply up to 5 coats in a day, no sanding between coats; apply at least 2-4 heavy coats for interior applications; 4-6 coats for exterior applications
- CHOOSE FINISH AND COLOR: Gloss finish comes in Clear or Amber colors; Satin finish comes in Clear only; Kit Sizes: Pint, Quart and 4 Quart; Coverage: 40-50 sq ft/pint; 80-100 sq ft/quart; NOTE: Halcyon Satin is not available in a 4 Quart kit
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon #6
TotalBoat-382660 - Thixo (185ml Cartridge) | Thickened Epoxy Adhesive | for Bonding, Gluing, Sealing and Filling | Use on Wood, Fiberglass, Metals, Brick, Stone, Glass, Tile & More
Asin: B00HRG875K | Ean: 0811932020291 | UPC: 811932020291
Thickened Epoxy Wont Sag: Unique Viscosity Is Perfect For Working Overhead Or On Vertical Surfaces. It Stays Where You Apply It. However, Thixo Is Still Thin Enough To Wet Out Fiberglass.
Wide Range Of Applications: Use On Wood, Fiberglass, Metals, Brick, Concrete, Glass, Slate, Tile, Stone And More. Thixo Is Used By Marine Trade Professionals, Construction Industry, Homeowners, And Diy Makers For Projects Ranging From Boat Building & Repair To Furniture Builds And Home Renovation.
Long Working Time Lets You Work At Your Pace: At 77°F, Thixo Gives You A Generous 50 Minutes Of Working Time. The Short 30-35 Minute Gel Time Means That Once You Apply It, It Sets Up Fast And Cures Fully In 24 Hours.
No Mixing, Mess, Or Waste: No Need To Mix Resin And Hardener. Included Mixing Tips Automatically Ensure Perfect 2:1 Mix Ratio Every Time. Convenient 185 Ml Cartridge Fits All Standard Caulking Guns. Each Cartridge Includes 2 Tips.
Features
- HIGH STRENGTH 2-PART THICKENED EPOXY ADHESIVE: For structural bonding, gluing, filling, and sealing projects. Cured epoxy can be drilled, sanded and painted, and is 100% waterproof
- NO MIXING, MESS, OR WASTE: No need to mix resin and hardener. Included mixing tips automatically ensure perfect 2:1 mix ratio every time. Convenient 185 ml cartridge fits all standard caulking guns. Each cartridge includes 2 tips
- THICKENED EPOXY WONT SAG: Unique viscosity is perfect for working overhead or on vertical surfaces. It stays where you apply it. However, Thixo is still thin enough to wet out fiberglass
- LONG WORKING TIME LETS YOU WORK AT YOUR PACE: At 77 F, Thixo gives you a generous 50 minutes of working time. The short 30-35 minute gel time means that once you apply it, it sets up fast and cures fully in 24 hours
- WIDE RANGE OF APPLICATIONS: Use on wood, fiberglass, metals, brick, concrete, glass, slate, tile, stone and more. Thixo is used by marine trade professionals, construction industry, homeowners, and DIY makers for projects ranging from boat building & repair to furniture builds and home renovation
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 1.00 Pounds
See On Amazon #7
TotalBoat-434282 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Pint Kit)
Asin: B00S9RBWIA | Ean: 0811932021380 | UPC: 811932021380
Easy To Mix And Apply: Foolproof 1 To 1 Mix Ratio - Just Mix The Blue And Yellow Components Until They Turn Green. Creamy Smooth Consistency Makes It Easy To Spread And Feather To A Fine Edge; Won't Sag On Vertical And Overhead Surfaces.
Choose Kit Size: 2-Pint Kit, 2-Quart Kit Or 1-Gallon Kit. Note: Totalboat Gelcoat Should Not Be Applied Directly Over Totalfair Or Gelcoat Will Not Cure Properly. Before Applying Gelcoat, Apply Totalboat 2-Part Epoxy Primer Or Totalprotect Over Totalfair.
Cures Fast. Easy To Sand And Paint: Quick-Drying Compound Is Ready To Sand In Just 3 Hours At 80°F; Cured Fairing Compound Sands Easily; Compatible With Latex And Epoxy Primers And Paints.
Super Smooth Finish For Permanent, Waterproof Repairs: Marine Filler Bonds Strongly To Damaged Areas And Cures Without Pinholes On Wood, Aluminum, Steel And Fiberglass Repair Areas; Cured Totalfair Is Waterproof; Use Above And Below The Waterline.
Features
- HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
- SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
- EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
- CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80 F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
- CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #8
TotalBoat - 409314 Gleam Marine Spar Varnish, Gloss and Satin Polyurethane Finish for Wood, Boats and Outdoor Furniture (Clear Gloss Quart)
Asin: B00J33B0MW | Model: 409314 | PartNumber: 409314 | Ean: 0811932020789 | UPC: 811932020789
Easy To Apply By Brushing, Rolling Or Spraying: For A High Gloss Finish, Apply 4-6 Coats Of Gleam Gloss; For A Sleek Satin Finish, Build With Coats Of Gleam Gloss Varnish And Use Gleam Satin For The Final Coats; Application Temp: 45-105F, 0-85% Rh.
Available In Gloss Or Satin (Low-Sheen), In Pint, Quart And Gallon Sizes; Coverage: 360-400 Sq Ft/Gallon; Thinner: Totalboat Special Brushing Thinner 100 (Brushing/Rolling); Totalboat Spray Thinner 101 (Spraying).
Self-Leveling Finish Dries Fast: Recoat In 1 Hr. @ 72°F; Apply Up To 3 Coats In 1 Day; If Desired, Thin 5-10% With Totalboat Special Brushing Thinner 100 (Brush/Roller Application) Or 10-20% With Totalboat Spray Thinner 101 (Spray Application).
Durable Urethane Spar Varnish With Maximum Uv Resistance; It Remains Flexible After Curing, And Won't Peel Or Crack When The Wood Expands And Contracts With Seasonal Humidity And Temperature Changes.
Features
- CLASSIC MARINE VARNISH contains premium tung oil, phenolic resins and UV blockers for a beautiful transparent amber finish on all types of interior and exterior wood on boats, strip canoes, kayaks, outdoor wooden bar tops, garage doors, furniture and more
- DURABLE URETHANE SPAR VARNISH with maximum UV resistance; it remains flexible after curing, and won't peel or crack when the wood expands and contracts with seasonal humidity and temperature changes
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: For a high gloss finish, apply 4-6 coats of Gleam Gloss; for a sleek satin finish, build with coats of Gleam Gloss varnish and use Gleam Satin for the final coats; Application Temp: 45-105F, 0-85% RH
- SELF-LEVELING FINISH DRIES FAST: Recoat in 1 hr. @ 72 F; apply up to 3 coats in 1 day; if desired, thin 5-10% with TotalBoat Special Brushing Thinner 100 (brush/roller application) or 10-20% with TotalBoat Spray Thinner 101 (spray application)
- AVAILABLE IN GLOSS OR SATIN (low-sheen), in Pint, Quart and Gallon sizes; Coverage: 360-400 sq ft/gallon; Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling); TotalBoat Spray Thinner 101 (spraying)
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 5.00 x 4.50 x 4.50 inches
See On Amazon #9
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood, White, 1 Quarts (Pack of 1)
Asin: B00HS4YY7G | Model: 365387 | PartNumber: 365387 | Ean: 0811932020338 | UPC: 811932020338
Easy To Apply By Brushing, Rolling Or Spraying: Use A Natural Bristle Paint Brush, A 1/8 " Solvent-Safe Foam Roller, Or To Spray, Use A 1.1Mm Tip; Wear Proper Personal Protection; Work In A Well-Ventilated Area; Boat Primer Is Chromate-Free And Lead-Free.
Available In White And Gray In Quart And Gallon Sizes. Brush/Roller Application - Thin With Totalboat Special Brushing Thinner 100; Spray Application - Thin With Xylene; Do Not Apply Topside Primer Thicker Than Recommended Or It May Not Cure Properly.
Dries Fast, Cures To A Smooth, Hard Finish: Ready To Sand In 60-90 Minutes At 65°F; Marine Paint Primer Is Easy To Sand, Then Just Wipe Clean And Apply A Topside Finish Such As Totalboat Wet Edge Or Totaltread Marine Non-Skid Deck Paint.
Covers Completely In Just One Coat: High-Solids Primer Seals The Surface With 1 Thin Coat; Apply A Second Coat Only If A Higher Build Is Needed; To Fill Large Surface Imperfections Use Totalboat Totalfair Epoxy Fairing Compound Before Applying Topside Primer.
Features
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65 F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #10
TotalBoat-482869 Lust Marine Varnish, High Gloss and Matte Finish for Wood, Boats, Outdoor Furniture (High Gloss, Quart)
Asin: B00VS802B0 | Model: 482869 | PartNumber: 482869 | Ean: 0811932021564 | UPC: 811932021564
Flexible Coating Won't Crack Or Peel: Premium, Oil-Based Marine Polyurethane Finish Is Not Damaged When Wood Expands And Contracts With Changes In Temperature; Perfect For All Types Of Wood.
Available In High Gloss Or Matte Finish In Pint, Quart And Gallon Sizes; Thinner: Totalboat Special Brushing Thinner 100 (Brushing/Rolling) Or Totalboat Spray Thinner 101 (Spraying); Coverage: 360-400 Sq. Ft./Gallon.
Easy To Apply By Brushing, Rolling Or Spraying; For A High Gloss Varnish Finish Apply 6-8 Coats Of Lust Gloss; For A Smooth Satin Finish, Build With Coats Of Lust Gloss Varnish; Use Lust Matte For The Finish Coats.
Classic Spar Varnish With A Modern Twist: High-Build, Fast-Drying Formula Allows Rapid Recoating, Multiple Coats Per Day And No Sanding Between Coats; Sand Lightly Before The Final Coat - Be Done In A Little Over 1 Day.
Features
- MARINE GRADE VARNISH imparts a rich, clear amber tone that enhances wood grain; creates a durable, uv resistant, waterproof finish that won't fade; ideal for interior and exterior wood, brightwork on boats & outdoor furniture
- CLASSIC SPAR VARNISH WITH A MODERN TWIST: High-build, fast-drying formula allows rapid recoating, multiple coats per day and no sanding between coats; sand lightly before the final coat - be done in a little over 1 day
- FLEXIBLE COATING WON'T CRACK OR PEEL: Premium, oil-based marine polyurethane finish is not damaged when wood expands and contracts with changes in temperature; perfect for all types of wood
- EASY TO APPLY by brushing, rolling or spraying; For a high gloss varnish finish apply 6-8 coats of Lust Gloss; for a smooth satin finish, build with coats of Lust gloss varnish; use Lust Matte for the finish coats
- AVAILABLE IN HIGH GLOSS OR MATTE FINISH in Pint, Quart and Gallon sizes; Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying); Coverage: 360-400 sq. ft./gallon
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 4.70 x 4.20 x 4.30 inches
See On Amazon #11
TotalBoat-510822 High Performance Epoxy Kit, Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair (Quart, Medium)
Asin: B06XGPW9XQ | Model: 510822 | PartNumber: 510822 | Ean: 0811932023124 | UPC: 811932023124
Choose Slow, Medium, Or Fast Hardener To Control Working Properties And Cure Times. Slow Hardener Has The Longest Working And Cure Times. Medium Hardener Is Ideal For Most Applications. Fast Hardener Has The Shortest Working Time And Fastest Cure.
Pumps Included: Metered Resin And Hardener Pumps Provide The Exact 2 Parts Resin To 1 Part Hardener Ratio For A Proper Cure Every Time; Easy-To-Use Pumps Are Calibrated So All You Do Is Mix One Full Pump Of Hardener To Every One Full Pump Of Resin.
Choose Epoxy Kit Size: Pint, Quart, Gallon Or 2 Gallon. All Totalboat Epoxy Kits Come With Calibrated Pumps. Compatible With Epoxy Thickeners, Fillers And Coloring Agents.
Non-Blushing Epoxy System Means No Time-Consuming Washdowns To Remove Surface Blush Between Coats, So Projects Get Finished Faster. Low Odor And Low Vocs Make It Great For Shop Or Indoor Use. Cured Surface Is Bpa-Free, Safer For Potential Food Contact.
Features
- EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener
- NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact
- CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure
- CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps. Compatible with epoxy thickeners, fillers and coloring agents
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time; easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #12
TotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair (Gallon Kit)
Asin: B07BR5VNH1 | Ean: 0811932023704 | UPC: 811932023704
Easy To Mix, Easy To Apply: For A 100G Mass, Catalyze With 1% Mekp To Get 15-20 Min. Of Working Time At 70°F (14 Drops Of Mekp Per Ounce Of Putty); Adjust Amount Of Catalyst To Control Working Time; Paste-Like Consistency Is Easy To Spread And Won’T Sag.
Available In Quart And Gallon Kits: Includes 2 Oz. Mekp. This Versatile Bonding Compound Can Bond Dissimilar Materials And Can Also Be Used In Many Home, Auto, Construction, And Aerospace Applications, With No Shrinking Or Cracking, Even In Bulk Fillings.
Fast-Setting Structural Adhesive Is Ideal For Fiberglass & Gelcoat Repair; For Cosmetic Fairing, Overcoat Polyester Structural Repair Putty With Totalboat Polyester Fairing Compound; It Sands Smooth Easily & Can Be Finished With Totalboat Gelcoat With Wax.
Marine Filler Has Premium Polyester Resin And Long Strand Glass Fibers For Strength, Impact Resistance & Elasticity; Ideal For Bonding Decks, Stringers & Liners To Hulls; Filleting And Bonding Bulkheads, And Filling Screw Holes, Bolt Holes, Chips & Dents.
Features
- PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline
- MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents
- EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70 F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won t sag
- FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax
- AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #13
TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (White), 1 Gallon (Pack of 1)(Packaging May vary)
Asin: B00HQP5DB8 | Model: TB-WEWTG | PartNumber: TB-WEWTG | Ean: 0811932020659 | UPC: 811932020659
Self-Leveling, Abrasion Resistant Polyurethane Finish Is Easy To Clean; Will Not Fade, Crack, Or Peel; Easy To Touch Up; Ideal For Power Boat Hulls, Sailboat Hulls, Campers, Rv Exteriors, Doors And Trim.
Choose From 22 Popular High Gloss Colors In Pints, Quarts & Gallons. Coverage: 350-400 Sq. Ft./Gal. (White, Black & Gray Also Available In Flat Finish). Primer: Totalboat Topside Primer Or Totalprotect (Metals).
Versatile Topside Paint: Wet Edge Looks Great On Fiberglass, Wood, Metals, And Previously Painted Surfaces; Not For Continuous Submersion On Boat Bottoms That Remain In The Water Longer Than 72 Hours.
Easy To Apply: 1-Part Formula Provides Professional Results With Just A Brush And Roller (Roll & Tip Method); Can Also Be Applied By Spraying; For Use Above The Waterline.
Features
- DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention
- EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method); can also be applied by spraying; for use above the waterline
- SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean; will not fade, crack, or peel; easy to touch up; ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim
- VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces; not for continuous submersion on boat bottoms that remain in the water longer than 72 hours
- CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals)
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 7.75 x 6.50 x 6.50 inches | Weight: 10.00 Pounds
See On Amazon #14
TotalBoat - 512884 Fixwood | Marine Grade Epoxy Putty | Stainable Paste Filler for Damaged Wood Repair or Replacement (2-Pint Kit), white
Asin: B0799R8RTH | Ean: 0811932023599 | UPC: 811932023599
Wide Range Of Uses: Repair Wood Stairs, Doors, Garage Door Frames, Stair Posts, Exterior Walls, Fascia Boards, Rafters, Window Sills, Shutters, Door Frames, Door Hinges, Wood Ladders, Split Wood, Deck Boards, And Other Damage.
Waterproof: 100% Waterproof Once Cured. For Deep Rot, Use Totalboat Penetrating Epoxy To Consolidate Wood First. Sizes: 2-Pint And 2-Quart Kit. Each Kit Contains Equal Parts Part A (Resin) And Part B (Hardener).
Acts Like Wood: Cured Putty Can Be Sanded, Carved, Drilled, Cut, Painted, Or Stained To Blend Easily With The Surrounding Wood Species. High-Strength Repairs Can Also Be Fastened With Nails And Screws.
Easy To Use: Just Mix In Equal Parts And Apply. Can Be Molded To Any Shape, And Stays In Place On Vertical Surfaces. Will Not Sag, Shrink Or Crack. For Interior & Exterior Use.
Features
- MAKE REPAIRS THAT LAST: Marine grade 2 part epoxy putty lets you make permanent repairs to rotted, missing, or damaged wood, including soft wood, dry rot & other damage
- EASY TO USE: Just mix in equal parts and apply. Can be molded to any shape, and stays in place on vertical surfaces. Will not sag, shrink or crack. For interior & exterior use
- WIDE RANGE OF USES: Repair wood stairs, doors, garage door frames, stair posts, exterior walls, fascia boards, rafters, window sills, shutters, door frames, door hinges, wood ladders, split wood, deck boards, and other damage
- ACTS LIKE WOOD: Cured putty can be sanded, carved, drilled, cut, painted, or stained to blend easily with the surrounding wood species. High-strength repairs can also be fastened with nails and screws
- WATERPROOF: 100% waterproof once cured. For deep rot, use TotalBoat Penetrating Epoxy to consolidate wood first. Sizes: 2-Pint and 2-Quart Kit. Each kit contains equal parts Part A (resin) and Part B (hardener)
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #15
TotalBoat ThickSet Deep Pour Epoxy Resin Kit (1.3 Gallon) - Crystal Clear Thick Pour Resin for Art, Casting, Epoxy River Tables, Live Edge Slabs, Molds, Wood
Asin: B07QKF5F6F | Ean: 0811932024374 | UPC: 811932024374
Pour Epoxy Up To 1" Thick Per Single Layer: Pour Single Layers Of Resin Up To 1/2″ Thick For Larger Casting Applications Such As Slab And River Table Pours, And Up To 1" Thick For Smaller Molds; For Even Deeper Pours Per Layer, Try Total Boat Thickset Fathom (Sold Separately).
Low Voc, Low Odor Resin Is Available In Four Sizes: 1.3 Quart Kit (1 Qt Resin, 1/3 Qt Hardener), 1.3 Gallon Kit (1 Gal Resin, 1/3 Gal Hardener), 4 Gallon Kit (3 Gal Resin, 1 Gal Hardener) And 8 Gallon Kit (6 Gal Resin, 2 Gal Hardener); 100% Made In The Usa.
Easy To Use, Easy To Tint: Simple Mix Ratio Of 3 Parts Epoxy Resin To 1 Part Hardener, And Long Working Time Make It Easy To Use; To Add Interest, Tint Mixed Liquid Epoxy With Mica Powder, Universal Tints, Alcohol Ink Pigments And Other Epoxy-Safe Colorants.
Crystal Clear Epoxy Resin Self-Levels To Creates A High-Gloss, Glass-Like Finish On Prepared Wood, Concrete, Stone, Ceramic And Metal Surfaces; Great For Deep Casting And Molding Projects To Create Unique Sculptures, Figurines, Jewelry And More.
Features
- DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling deep voids in wood; waterproof resin cures without shrinkage, cracking or yellowing
- CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces; great for deep casting and molding projects to create unique sculptures, figurines, jewelry and more
- POUR EPOXY UP TO 1 THICK PER SINGLE LAYER: Pour single layers of resin up to 1/2 thick for larger casting applications such as slab and river table pours, and up to 1 thick for smaller molds; for even deeper pours per layer, try Total Boat ThickSet Fathom (sold separately)
- EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and long working time make it easy to use; to add interest, tint mixed liquid epoxy with mica powder, universal tints, alcohol ink pigments and other epoxy-safe colorants
- LOW VOC, LOW ODOR RESIN IS AVAILABLE IN FOUR SIZES: 1.3 Quart Kit (1 qt resin, 1/3 qt hardener), 1.3 Gallon Kit (1 gal resin, 1/3 gal hardener), 4 Gallon Kit (3 gal resin, 1 gal hardener) and 8 Gallon Kit (6 gal resin, 2 gal hardener); 100% made in the USA
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 12.85 pounds
See On Amazon #16
TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart), Clear, 32 Fl Oz (Pack of 1)
Asin: B087RW6VLW | Model: 520415 | PartNumber: 520415 | Ean: 0811932024671 | UPC: 811932024671
Ideal Surface Prep Solvent Wipe For Rubberized Inflatable Materials Prior To Applying Totalboat Inflatable Boat Paint.
Available In Quart Size. 100% Made In The Usa. Use Only With The Totalboat Products Specified.
Makes It Easy To Remove Paint From Tools And Equipment After Painting Is Done.
Perfect For Brush, Roller, Or Spray Applications.
Features
- Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy Primer systems.
- Perfect for brush, roller, or spray applications
- Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint
- Makes it easy to remove paint from tools and equipment after painting is done
- Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #17
TotalBoat - 405721 Thixo Fast Cure 2:1 Epoxy System
Asin: B00X6AM06I | Model: TB-THIXO-FC | PartNumber: TB-THIXO-FC | Ean: 0811932020901 | UPC: 811932020901
Dispenses Perfectly Mixed Epoxy Every Time Via Innovative Mixing Tips (2 Included Per Tube).
185 Ml Cartridge Fits Standard Caulk Guns.
Cures 3 Times Faster Than Thixo Or Other Thixotropic Epoxy Adhesives On The Market.
Excellent Adhesive For Wood, Metal, Or Fiberglass.
Features
- Powerful, fast curing 2:1 thickened epoxy adhesive
- Excellent adhesive for wood, metal, or fiberglass
- Dispenses perfectly mixed epoxy every time via innovative mixing tips (2 included per tube)
- Cures 3 times faster than Thixo or other thixotropic epoxy adhesives on the market
- 185 Ml cartridge fits standard caulk guns
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #18
TotalBoat TotalProtect Epoxy Barrier Coat System (White, Quart), 1 Count (Pack of 1)
Asin: B01729KQ32 | Model: 487739 | PartNumber: 487739 | Ean: 0811932021700 | UPC: 811932021700
Provides Superior Protection On All Underwater Metals.
Available In White Or Gray In Quart Or Gallon Sizes. Coverage: 225 Sq. Ft. Per Gallon (At 7 Mils Wet). Thinner: Totalboat Epoxy Primer Thinner 200..
Easy To Mix And Apply By Roller Or Spray. No Sanding Required. Fast Drying Primer Creates A Flexible, Durable Epoxy Barrier Coat..
Excellent For Gelcoat Blister Prevention And Repair Work On Fiberglass Boats.
Features
- High-build two part epoxy primer and barrier coat for use above and below the waterline
- Excellent for gelcoat blister prevention and repair work on fiberglass boats
- Provides superior protection on all underwater metals
- Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.
- Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200.
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #19
TotalBoat-488366 TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (White, Gallon), 1 Gallon (Pack of 1)
Asin: B01CR9JZGG | Model: 488366 | PartNumber: 488366 | Ean: 0811932021755 | UPC: 811932021755
Easy To Use: Apply 1-2 Coats By Brushing, Rolling Or Spraying On Prepared Fiberglass, Wood And Metal; Prime Prepared Metals With Totalboat Totalprotect; For Fiberglass Prime With Totalprotect If Desired; For Wood Use Totalboat Topside Primer If Desired.
Choose Color And Size: Available In White And Gray Colors, In Quart And Gallon Sizes. Coverage: 250-300 Sq Ft/Gal; Thinning: Brush/Roll Application - Totalboat Special Brushing Thinner 100; Spray Application - Xylene.
Easy To Keep Clean: Remove Grease, Oil, And Grime From The High-Gloss Finish Using A Cleaner/Degreaser. Totalbilge Won't Lift, Crack, Peel, Or Stain.
Choose Light Gray Or White: Paint Boat Bilge Areas To Protect And Brighten So You Can Find & Fix Leaks And Other Problems Before They Become Costly Damage, Or Find Items Accidentally Dropped Into The Bilge; Both Colors Offer Excellent Coverage And Hide.
Features
- TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat bilges, engine rooms, lazarettes, lockers, stowage areas and bulkheads
- CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly damage, or find items accidentally dropped into the bilge; both colors offer excellent coverage and hide
- EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal; prime prepared metals with TotalBoat TotalProtect; for fiberglass prime with TotalProtect if desired; for wood use TotalBoat Topside Primer if desired
- EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain
- CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal; THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100; Spray Application - Xylene
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #20
TotalBoat Polyester Finishing Resin (Gallon)
Asin: B00PZ1CUCU | Ean: 0811932021304, 0811932022936 | UPC: 811932022936, 811932021304
Versatile Polyester Resin Is Easy Is To Mix With Mekp Catalyst And Apply By Brush Or Plastic Spreader To Prepared Fiberglass, Wood, Metal, And Composites.
Choose Quart Or Gallon Size. Includes Mekp Hardener. Note: You Can Even Tint Polyester Fiberglass Resin With Opaque Pigment Dispersions. If Tinting, Mix Pigment In Thoroughly Before Adding Mekp.
Durable, Hard Finish Resists Scratches And Staining. For A Glossy Appearance, The Cured Surface Can Be Wet Sanded And Buffed To A High Shine.
Easy To Use, Preferred By Pros For Building And Repairs: Medium Viscosity Resin Spreads Evenly, Wets Out Fiberglass Easily, Won't Sag On Vertical Surfaces & Prevents Patter Print-Through On Gelcoat. Ideal For Boat Building, Repairs, And Surfboards.
Features
- MARINE GRADE FINISHING RESIN contains wax so it dries to a tack-free surface ready for sanding, paint, or gel coat application. Used in fiberglass layups as the final coat over sticky polyester laminating resin
- EASY TO USE, PREFERRED BY PROS FOR BUILDING AND REPAIRS: Medium viscosity resin spreads evenly, wets out fiberglass easily, won't sag on vertical surfaces & prevents patter print-through on gelcoat. Ideal for boat building, repairs, and surfboards
- VERSATILE POLYESTER RESIN is easy is to mix with MEKP catalyst and apply by brush or plastic spreader to prepared fiberglass, wood, metal, and composites
- DURABLE, HARD FINISH resists scratches and staining. For a glossy appearance, the cured surface can be wet sanded and buffed to a high shine
- CHOOSE QUART OR GALLON SIZE. Includes MEKP hardener. NOTE: You can even tint polyester fiberglass resin with opaque Pigment Dispersions. If tinting, mix pigment in thoroughly before adding MEKP
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon
Looking For Something Else?
Search