StewMac Neck Shims for Guitar, Made of Solid Maple, For Bolt-on Neck, Shaped, Set of 3, American Made
Asin: B01LW96EM8 | Model: 2135 | PartNumber: 2135
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Better Than The Typical Homemade "Guitar Pick" Neck Joint Shims, Which Create An Unwanted Gap, These Tapered Shims Cover The Entire Heel Of The Neck.
Set Includes 3 Hard Maple Shims In The Following Tapers: 0.25-Degree Taper, 0.5-Degree Taper And 1-Degree Taper.
Keep These On Hand For A Quick Turnaround On This Common Repair.
Made Of Solid Maple To Match The Guitar Neck.
Features
- Used to change the angle of a bolt-on guitar neck
- Made of solid maple to match the guitar neck
- Better than the typical homemade guitar pick neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck
- Keep these on hand for a quick turnaround on this common repair
- Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon Similar To StewMac Neck Shims for Guitar
#1
StewMac Fret Leveling File, 6" Length
Asin: B073JMY2PD | Model: 0862 | PartNumber: 0862 | Ean: 0840014711451 | UPC: 840014711451
Features Comfortable Hardwood Handle.
6-Inch Length Is Perfect For General Use.
Works Quickly To Level Frets Or Fingerboards, Leaving A Smooth Finish.
Features
- This custom-made file gives you a handle on your fret work
- Works quickly to level frets or fingerboards, leaving a smooth finish
- Features comfortable hardwood handle
- 6-inch length is perfect for general use
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon #2
StewMac Pre-Cut and Pre-Radiused Fretwire Set, Wide/Highest, 16" Radius, 24-pieces
Asin: B07NZ2436S | Model: 0150-PC-16 | PartNumber: 0150-PC-16
Wide Width Fretwire Is Favored For String Bending, And Is Used On Many Modern Electric Guitars And Basses.
Each Pack Contains 24 Pieces Of Pre-Cut, Pre-Radiused Wire; Each Piece Measures 2.75" Long.
Sized To Fit A 0.023" (0.58Mm) Fret Slot Width.
In A Busy Shop Time Is Money, Especially When It Comes To Fretting, Which Is Why Using Our Pre-Cut And Pre-Radiused Fretwire Will Make Your Fretting Faster, Easier, And More Profitable.
Features
- Get fretting now with Pre-Cut and Pre-Radiused fretwire. SPECS: Width .110" (2.79mm) Crown .053" (1.35mm) Tang .074" (1.88mm)
- In a busy shop time is money, especially when it comes to fretting, which is why using our pre-cut and pre-radiused fretwire will make your fretting faster, easier, and more profitable
- Wide width fretwire is favored for string bending, and is used on many modern electric guitars and basses
- Sized to fit a 0.023 (0.58mm) fret slot width
- Each pack contains 24 pieces of pre-cut, pre-radiused wire; each piece measures 2.75 long
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon #3
StewMac Neck Shaping Templates for Electric Guitar, for 1959 Les Paul Neck Profile
Asin: B07R85JTHJ | Model: 17862 | PartNumber: 17862
We've Been Meticulously Measuring The Necks Of Some Of The Most Amazing And Timeless Electric Guitars Ever Made To Create These Super-Accurate Shaping Templates.
These New Templates Have Exact Contours Of The Back Of The Neck, Taken At The Nut, Middle Of The Neck, And More, And Also Include Nut Width Dimensions And Neck To Heel Profile.
Each Template Is Laser Cut From Hard Plastic For A Lifetime Of Use In Your Shop.
Now With Our Neck Shaping Templates You Can Finally Build An Iconic Neck With Pinpoint Accuracy.
Features
- If you're a custom builder, you'll love being able to offer customers neck profile choices that have been recognized and loved by generations of players
- Now with our neck shaping templates you can finally build an iconic neck with pinpoint accuracy
- We've been meticulously measuring the necks of some of the most amazing and timeless electric guitars ever made to create these super-accurate shaping templates
- Each template is laser cut from hard plastic for a lifetime of use in your shop
- These new templates have exact contours of the back of the neck, taken at the nut, middle of the neck, and more, and also include nut width dimensions and neck to heel profile
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon #4
StewMac Shims compatible with Most Floyd Rose Locking Nut, Set of 8
Asin: B0C9516ZHH | Model: 2125 | PartNumber: 2125 | Ean: 0840014740048 | UPC: 840014740048
Features
- These shims fit most and are compatible with Floyd Rose style locking nuts, including original Floyd Rose, Schaller, Ibanez Edge, Charvel/Jackson, and our Golden Age Locking Tremolo.
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
Warranty: Limited lifetime.
See On Amazon #5
StewMac Neck Support Caul
Asin: B01HUCF36G | Model: 4479 | PartNumber: 4479
Wooden Support With Specially Contoured And Lined It Cork To Get A Firm, Non-Marring, Non-Skid Hold On The Neck.
Approximate Dimensions: 12" X 2-3/4" X 1" (305Mm X 70Mm X 25Mm).
Saw It Into Shorter Lengths To Make Lower Clamping Cauls For Glue-In Fret Jobs.
Features
- Excellent support for a guitar neck while pressing or hammering frets, or a lower clamping caul for regluing a fingerboard
- Saw it into shorter lengths to make lower clamping cauls for glue-in fret jobs
- Wooden support with specially contoured and lined it cork to get a firm, non-marring, non-skid hold on the neck
- Approximate dimensions: 12 x 2-3/4 x 1 (305mm x 70mm x 25mm)
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon #6
StewMac Guitar Repair Vise with Neck Protectors 3-Pack
Asin: B01HUD5NQ0 | Model: 1813 | PartNumber: 1813
Features Protective Urethane Surfaces On Custom Hardwood Jaws, And Nylon-Core Adjustable Tension Nuts Control 360° Jaw Rotation.
Installation Instructions Included.
This Vise Holds The Tapered Angles Of A Neck Securely Without Needing Any Shims.
Features Fast-Crank Handwheel With Removable Handle And Roller Bearings For Fast Smooth Opening/Closing.
Features
- Our Guitar Repair Vise is 32 pounds of heavy-duty steel that rotates full-circle to position the work for comfortable access
- Features fast-crank handwheel with removable handle and roller bearings for fast smooth opening/closing
- Features protective urethane surfaces on custom hardwood jaws, and nylon-core adjustable tension nuts control 360 jaw rotation
- This vise holds the tapered angles of a neck securely without needing any shims
- Installation Instructions Included
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon #7
StewMac Fretbar Understring Leveler, 18" Length
Asin: B08C5JHDXZ | Model: N4643 | PartNumber: N4643 | Ean: 0840014734504 | UPC: 840014734504
Made Of Durable Extruded Aluminim.
Works With The Strings Off.
No More Mistakes, Or Wasting Strings And Sandpaper.
Level Frets With The Strings On.
Features
- Level frets under actual string tension
- Level frets with the strings on
- Made of durable extruded aluminim
- No more mistakes, or wasting strings and sandpaper
- Works with the strings off
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon #8
StewMac Guitar Neck Shims for Bolt-on Necks, Made of Solid Maple, Blank, Set of 3
Asin: B01LW929UM | Model: 2130 | PartNumber: 2130
Better Than The Typical Homemade "Guitar Pick" Neck Joint Shims, Which Create An Unwanted Gap, These Tapered Shims Cover The Entire Heel Of The Neck.
Set Includes 3 Hard Maple Shims In The Following Tapers: 0.25-Degree Taper, 0.5-Degree Taper And 1-Degree Taper.
Keep These On Hand For A Quick Turnaround On This Common Repair.
Made Of Solid Maple To Match The Guitar Neck.
Features
- Used to change the angle of a bolt-on guitar neck
- Made of solid maple to match the guitar neck
- Better than the typical homemade guitar pick neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck
- Keep these on hand for a quick turnaround on this common repair
- Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon #9
StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Shaped, Set of 3
Asin: B01LVXSE9T | Model: 2131 | PartNumber: 2131
Better Than The Typical Homemade "Guitar Pick" Neck Joint Shims, Which Create An Unwanted Gap, These Tapered Shims Cover The Entire Heel Of The Neck.
Set Includes 3 Hard Maple Shims In The Following Tapers: 0.25-Degree Taper, 0.5-Degree Taper And 1-Degree Taper.
Keep These On Hand For A Quick Turnaround On This Common Repair.
Made Of Solid Maple To Match The Guitar Neck.
Features
- Used to change the angle of a bolt-on bass neck
- Made of solid maple to match the guitar neck
- Better than the typical homemade guitar pick neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck
- Keep these on hand for a quick turnaround on this common repair
- Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper
- See more on Amazon...
Brand: StewMac | Manufacturer: StewMac
See On Amazon
Looking For Something Else?
Search