Dive Alert Ultra-Loud Surface Signaling Device DB1
Asin: B01LW9AUSH | Ean: 6641657083271
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Db1 - Fits 85% Of All Power Inflators Including Aqualung I3 Control System.
Db3 - Fits Scubapro Air Ii, Tusa Duo-Air, Atomic Ss1, Zeagle Octoz & Sherwood Gemini.
Db2 - Fits Aqua Lung Air Source & Air Source Qd, Mares Air Control, Oceanic Air Xs & Aeris Airlink.
No Mods Required: Does Not Require Any Modification To Your Equipment & Does Not Interfere With The Normal Operation Of Your Equipment. Easy To Use Design: Simply Press The Red Button To Create A Piercingly Loud Sound..
Features
- DiveAlert is a specially designed, small, light weight air horn that uses quick-connect / disconnect hose couplings to become an integrated part of your power inflator and buoyancy compensator. Comes in three different models to accommodate different connectors: dB1, dB2, and dB3.
- NO MODS REQUIRED: Does not require any modification to your equipment & does not interfere with the normal operation of your equipment. EASY TO USE DESIGN: Simply press the red button to create a piercingly loud sound.
- DB1 - Fits 85% of all power inflators including AquaLung i3 Control System
- DB2 - Fits Aqua Lung Air Source & Air Source QD, Mares Air Control, Oceanic Air XS & Aeris AirLink
- DB3 - Fits Scubapro AIR II, Tusa Duo-Air, Atomic SS1, Zeagle OctoZ & Sherwood Gemini
- See more on Amazon...
Brand: Dive Alert | Manufacturer: Dive Alert
Dimensions: 1.70 x 7.10 x 4.50 Inches
See On Amazon Similar To Dive Alert UltraLoud Surface Signaling
#1
ACR C-Strobe Manual Activated Personal Distress Strobe Light [3947]
Asin: B01E7MVEUQ | Model: 3965.1 | PartNumber: 3965.1 | Ean: 0791659396513 | UPC: 791659396513
The Extensive Continuous Operating Life Of Greater Than 120 Hours.
Uses Two “Aa” 1. 5V Batteries (Not Included).
Easy Twist On/Off Activation.
Impact-Resistant Case.
Waterproof – Tested For 24 Hrs At 3. 3 Ft. (1M).
Exceedingly Bright 45 Lumen White Led.
Features
- For location assistance during low-light emergencies
- Exceedingly bright 45 Lumen White LED
- The extensive continuous operating life of greater than 120 hours
- Waterproof Tested for 24 hrs at 3. 3 ft. (1m)
- Easy twist On/Off activation
- Impact-resistant case
- Uses two AA 1. 5V batteries (not included)
- See more on Amazon...
First Available: 02/11/2020
Brand: acr | Manufacturer: ACR
Dimensions: 5.00 x 10.00 x 5.00 inches | Weight: 0.00 Pounds
Warranty: Manufacturer warranty.
See On Amazon #2
ORCATORCH SD01 Mini Glow Tank, Scuba Dive Strobe Beacon Diving Signal Light Night Dive Flashing Marker Light with AAA Battery, for 150M Underwater Diving (5 Colors Option)
Asin: B098SWSVQ2 | Model: SD01 | PartNumber: SD01 | Ean: 6973575750325
✅ Waterproof Design - The Diving Strobe Light Is Fully Waterproof, With High-Quality Double-Sealing Waterproof O-Rings, Allowing It To Be Used In Any Type Of Diving Environment Without Fear Of Damage From Water Exposure..
✅ Lightweight And Portable - The Sd01 Diving Beacon Is Lightweight And Compact, Making It Easy To Carry And Use During Diving Trips. Its Small Size Also Makes It Easy To Store In A Diving Bag Or Backpack When Not In Use..
✅ Available In Five Colors - The Sd01 Is Available In Blue, White, Green, Red, And Orange, Giving You A Colorful And Interesting Underwater Diving Experience. Your Diving Trip Will No Longer Be Monotonous! Friendly Tip: Each Led Light Only Has One Color. Packed With An Exquisite Eva Bag, The Sd01 Makes For An Ideal Gift And Must-Have Scuba Gear For Your Divers..
✅ Easy To Use - The Sd01 Scuba Tank Light Is Designed For Ease Of Use And Features A Twist On/Off Switch At The Head, Making It Very Easy To Operate. Tightening The Head Turns On The Light, While Unscrewing The Head Turns It Off..
✅ Long Battery Life - This Dive Marker Light Is Powered By An Aaa Alkaline Battery, And The Light Can Work Continuously For Up To 108 Hours, Allowing Divers To Stay Underwater For Extended Periods Without Worrying About The Signal Light Losing Power. The Flash Frequency Is Set To Three Flashes Per Two Seconds..
Features
- Signal Light for Location - The SD01 is designed to provide high visibility in underwater conditions, ensuring that divers are easily seen by other divers and boats. By attaching the SD01 signal light to diving tanks or BCD, it becomes easy for your buddy to locate you when diving in dark or deep sea conditions. It can also be used for other night outdoor activities, such as camping, caving, group outings at night, team tag, etc.
- Long Battery Life - This dive marker light is powered by an AAA Alkaline battery, and the light can work continuously for up to 108 hours, allowing divers to stay underwater for extended periods without worrying about the signal light losing power. The flash frequency is set to three flashes per two seconds.
- Waterproof Design - The diving strobe light is fully waterproof, with high-quality double-sealing waterproof O-rings, allowing it to be used in any type of diving environment without fear of damage from water exposure.
- Easy to Use - The SD01 scuba tank light is designed for ease of use and features a twist on/off switch at the head, making it very easy to operate. Tightening the head turns on the light, while unscrewing the head turns it off.
- Lightweight and Portable - The SD01 diving beacon is lightweight and compact, making it easy to carry and use during diving trips. Its small size also makes it easy to store in a diving bag or backpack when not in use.
- Available in Five Colors - The SD01 is available in blue, white, green, red, and orange, giving you a colorful and interesting underwater diving experience. Your diving trip will no longer be monotonous! Friendly tip: Each LED light only has one color. Packed with an exquisite EVA bag, the SD01 makes for an ideal gift and must-have scuba gear for your divers.
- See more on Amazon...
Brand: ORCATORCH | Manufacturer: ORCATORCH TECHNOLOGY LIMITED
Dimensions: 1.20 x 0.30 x 0.30 inches | Weight: 0.13 Pounds
See On Amazon #3
ORCATORCH SD03 Dive Beacon 4-Color-in-1 (Blue, Red, White, Green) 8 Modes Scuba Diving Signal Light with Constant Light or Flashing Mode Night Dive LED Marker Light, for 150M Underwater Diving
Asin: B09TFL2918 | Model: OT-SD03-2022 | PartNumber: OT-SD03-2022
✅ Rotary Switch: Tighten The Head To Turn On The Light, Unscrew The Head To Turn Off. Both Colour And Light Mode Can Be Chosen By Rotating The Head..
✅ Long Runtime & Battery Included: This Beacon Powered By 1 X Aa Alkaline Battery, The Max Runtime Reaches 250 Hours. And This Scuba Marker Light Can Be Used Underwater 150M..
✅ Compact Design & Memory Function: The Net Weight Of Sd03 Signal Light Is Only 50G. The Mode Used For More Than 3S Will Be Memorized, When You Turn It On, The Sd03 Will Start To Cycle From The Memorized Mode By Default..
✅ Constant Light Or Flashing Mode All In 1 : You Can Tighten And Loosen The Light Body To Switch The Modes, It Will Cycle In " White - White Strobe - Red - Red Strobe - Blue - Blue Strobe - Green - Green Strobe " Modes..
Features
- 4-Color-in-1: Blue, Red, White and Green colours and 8 modes integrated in 1 light. You can switch colors as you like during your diving trip. Give you a colorful and interesting underwater diving experience!
- Constant Light or Flashing Mode All in 1 : You can tighten and loosen the light body to switch the modes, it will cycle in white - white strobe - red - red strobe - blue - blue strobe - green - green strobe modes.
- Rotary Switch: Tighten the head to turn on the light, unscrew the head to turn off. Both colour and light mode can be chosen by rotating the head.
- Compact Design & Memory Function: The net weight of SD03 signal light is only 50g. The mode used for more than 3s will be memorized, when you turn it on, the SD03 will start to cycle from the memorized mode by default.
- Long Runtime & Battery Included: This beacon powered by 1 x AA Alkaline battery, the max runtime reaches 250 hours. And this scuba marker light can be used underwater 150m.
- See more on Amazon...
Brand: ORCATORCH | Manufacturer: ORCATORCH TECHNOLOGY LIMITED
Dimensions: 0.65 x 1.63 x 0.74 Inches | Weight: 0.11 pounds
Warranty: 24 months warranty.
See On Amazon #4
Scuba Choice Scuba Diving 4' Surface Marker Signal Tube with Plastic Clip, Orange
Asin: B00V972VA0 | Model: SCSM-04A-OR | PartNumber: SCSM-04A-OR | Ean: 0627154148695 | UPC: 627154148695
Plastic Clip Included.
Easy To Use Oral Inflater. "Diver Below' Print.
Fits In Bcd Pocket Or Clip.
Size: 5" (W) X 4' (L).
Features
- Material: Nylon with TPU
- Size: 5 (W) x 4' (L)
- Plastic clip included
- Fits in BCD pocket or clip
- Easy to use oral inflater. Diver Below' print
- See more on Amazon...
Brand: Scuba Choice | Manufacturer: Aqua Edge
Dimensions: 3.00 x 6.00 x 3.00 Inches | Weight: 0.25 pounds
See On Amazon #5
Ideations New Dive Alert Plus Version 2 Signaling Device - DV1 for All Standard Inflators
Asin: B00G1RR3C4
Uses A Small Amount Of Air From Your Scuba Tank To Make A Piercingly Loud Sound (On Surface, Or In Water).
Dive Safe.
People Have Been Able To Hear A Divealert One Mile Away From Diver In Need.
Fits All Standard Inflators.
Features
- Uses chrome-plated brass couplings to attach to your power inflator
- Fits All Standard Inflators
- Uses a small amount of air from your SCUBA tank to make a piercingly loud sound (On Surface, or In Water)
- People have been able to hear a DiveAlert one mile away from diver in need
- Dive Safe
- See more on Amazon...
Brand: Dive Alert | Manufacturer: Dive Alert
See On Amazon #6
DiveSafe Delayed Surface Marker Buoy - 6ft Open Bottom with Over Pressure Valve, High Visibility Reflective Band, Strobe Light or Flashlight Holder, 100ft ABS Finger Reel and Whistle
Asin: B07M6DD6QT | Model: SMBK | PartNumber: SMBK | Ean: 0692599540540 | UPC: 692599540540
Reliable And Rupture Resistant - Made From A 210D Nylon Fabric, Double Stitched With A Tpu Coating For Added Strength, Our Delayed Surface Marker Buoy (Dsmb) Can Be Safely Deployed At Depth. Included Is An Over Pressure Valve That Will Ensure That Over Inflation Or Rapid Expansion Does Not Compromise The Smb Upon Surfacing. Simply Inflate Orally Or With Your Octo Regulator Through The Opening In The Bottom..
Included 100Ft Dive Reel And Whistle Accessories - Our Finger Spool Is An Abs Reel With 100Ft Of Yellow Line And Includes A Double Ended Clip. Attached To The Top Of The Markers Is A Non Brittle Plastic Dive Whistle, With Two Sound Chambers And Can Be Heard From Over A Half Mile Away And Will Not Freeze, Meaning It Will Be As Effective During Winter Ice Dives Or In Tropical Oceans..
No Need To Worry About Losing Your Reel Underwater - With Our Compact All In One Design, Your 100Ft Dive Spool Is Housed Inside A Mesh Pouch And Attached To The Dsmb. Simply Attach The Smb To Your Bcd With The D-Clip And You'll Avoid Having To Carry A Reel In Your Pocket And Connecting It Underwater. Nothing Is More Of A Pain, Than Dropping Your Reel Underwater And Having To Reel That Back Up..
Be Seen At Night In An Emergency - We Have Designed Our Dsmb To Be Seen At Night, With A Highly Visible Reflective Band Wrapped Fully Around The Diving Marker And Two Holders At The Top Of The Tube, One For A Strobe Light And Another For A Diving Flashlight Or Torch, That Will Shine High Into The Sky To Allow You To Be Seen By Boats From Up To 500 Yards Away..
Features
- Dive Safely in Crowded Areas or Signal Your Boat Team - A safety sausage is necessary gear for every scuba diver, whether it's to avoid crowded marinas, bays or lakes from other boats or jet skis or to flag your boat team where you are located while in the ocean or drift diving. Our safety marker is 6ft tall, with Diver Below markings and a weighted bottom to ensure maximum visibility during the day.
- Be Seen At Night in an Emergency - We have designed our DSMB to be seen at night, with a highly visible reflective band wrapped fully around the diving marker and two holders at the top of the tube, one for a strobe light and another for a diving flashlight or torch, that will shine high into the sky to allow you to be seen by boats from up to 500 yards away.
- Reliable and Rupture Resistant - Made from a 210D Nylon Fabric, double stitched with a TPU coating for added strength, our delayed surface marker buoy (DSMB) can be safely deployed at depth. Included is an over pressure valve that will ensure that over inflation or rapid expansion does not compromise the SMB upon surfacing. Simply inflate orally or with your octo regulator through the opening in the bottom.
- No Need to Worry about Losing Your Reel Underwater - with our compact all in one design, your 100ft dive spool is housed inside a mesh pouch and attached to the DSMB. Simply attach the SMB to your BCD with the D-clip and you'll avoid having to carry a reel in your pocket and connecting it underwater. Nothing is more of a pain, than dropping your reel underwater and having to reel that back up.
- Included 100ft Dive Reel and Whistle Accessories - Our finger spool is an ABS reel with 100ft of yellow line and includes a double ended clip. Attached to the top of the markers is a non brittle plastic dive whistle, with two sound chambers and can be heard from over a half mile away and will not freeze, meaning it will be as effective during winter ice dives or in tropical oceans.
- See more on Amazon...
Brand: DiveSafe Scuba | Manufacturer: DiveSmart
Dimensions: 4.00 x 1.00 x 1.00 inches | Weight: 0.14 pounds
Warranty: 1 year limited warranty
See On Amazon #7
Dive Alert Plus DV3 Scuba Signaling Device - Diver Noise Maker - Diver Noise Makers - Underwater Signaling Device - Underwater Signal Device
Asin: B01N3STCAY | Ean: 0618152121490 | UPC: 618152121490
Above And Below: Dive Alert Plus' Scuba Diving Noise Maker Uses A Small Amount Of Air From Your Scuba Cylinder To Produce A Loud Sound That's Audible Both On The Surface And Underwater..
Extra Loud Dive Signal: People Have Been Able To Hear A Divealertplus One Mile Away From A Diver In Need Above Water. In Conditions Where Visibility Is Limited, A Divealertplus Can Be Incredibly Useful..
Lightweight Durability: This Emergency Signaling Device Is Small And Lightweight, Yet Can Generate A Piercingly Loud Sound In Air Or Water..
Easy Installation: Installation Of This Scuba Noise Maker Is Easy, And Does Not Require Any Modification Of Your Other Equipment..
Features
- HI TECH DIVE SIGNALING DEVICE: Signal a buddy while submerged or get the attention of a boat on the surface. Dive Alert Plus is a specially designed, small scuba signaling device that becomes an integrated part of your BCD power inflator.
- EASY INSTALLATION: Installation of this scuba noise maker is easy, and does not require any modification of your other equipment.
- ABOVE AND BELOW: Dive Alert Plus' scuba diving noise maker uses a small amount of air from your scuba cylinder to produce a loud sound that's audible both on the surface and underwater.
- LIGHTWEIGHT DURABILITY: This emergency signaling device is small and lightweight, yet can generate a piercingly loud sound in air or water.
- EXTRA LOUD DIVE SIGNAL: People have been able to hear a DiveAlertPLUS one mile away from a diver in need above water. In conditions where visibility is limited, a DiveAlertPLUS can be incredibly useful.
- See more on Amazon...
Brand: Dive Alert | Manufacturer: DIVE ALERT
Dimensions: 2.10 x 4.40 x 2.90 Inches | Weight: 0.55 pounds
See On Amazon #8
Dive Alert Plus, V.2 (in Air or in Water), DV-3
Asin: B00GDBP2W6 | Model: D729V | PartNumber: D729V
Brand: Dive Alert Plus | Manufacturer: Ideations
Weight: 0.55 Pounds
See On Amazon #9
Dive Alert Plus V2
Asin: B00E92FYJW | Ean: 0618152121414 | UPC: 618152121414
Dv1 - Fits 85% Of All Power Inflators Including Aqualung I3 Control System.
Dv3 - Fits Scubapro Air Ii, Tusa Duo-Air, Atomic Ss1, Zeagle Octoz & Sherwood Gemini.
Dv2 - Fits Aqua Lung Air Source & Air Source Qd, Mares Air Control, Oceanic Air Xs & Aeris Airlink.
No Mods Required: Does Not Require Any Modification To Your Equipment & Does Not Interfere With The Normal Operation Of Your Equipment. Easy To Use Design: Once The Tank Is Turned On And The Divealertplus Connected, Squeeze The Divealertplus Softly Underwater For A Subsurface Signal. Or Squeeze It Firmly On The Surface For A Loud Surface Signal Blast..
Features
- DiveAlertPLUS is a specially designed, small, light weight pneumatic signaling device that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator. Installation is easy and takes only a moment. Comes in three different models to accommodate different connectors: DV1, DV2, and DV3.
- NO MODS REQUIRED: Does not require any modification to your equipment & does not interfere with the normal operation of your equipment. EASY TO USE DESIGN: Once the tank is turned on and the DiveAlertPLUS connected, squeeze the DiveAlertPLUS softly underwater for a subsurface signal. Or squeeze it firmly on the surface for a loud surface signal blast.
- DV1 - Fits 85% of all power inflators including AquaLung i3 Control System
- DV2 - Fits Aqua Lung Air Source & Air Source QD, Mares Air Control, Oceanic Air XS & Aeris AirLink
- DV3 - Fits Scubapro AIR II, Tusa Duo-Air, Atomic SS1, Zeagle OctoZ & Sherwood Gemini
- See more on Amazon...
Brand: Trident | Manufacturer: Dive Alert
Dimensions: 1.70 x 4.50 x 7.00 inches | Weight: 1.00 Pounds
See On Amazon #10
New 2014 Ideation Dive Alert Plus Version 2 Signaling Device - DV3 for the ScubaPro A.I.R. 2, TUSA Duo-Air, Sherwood Gemini, Diverite Source, H2Odyssea Inflator Plus, Atomic SS1, & the Zeagle Octo-Z
Asin: B00G1RSQ02 | Model: 1 | PartNumber: 1 | Ean: 0785571907735 | UPC: 785571907735
Brand: Birsppy | Manufacturer: Ideations
See On Amazon #11
DiveAlert Plus V-2 Subsurface Signaling Device - Standard DV1 for Scuba Divers
Asin: B008GVX9EY | Model: SG_B008GVX9EY_US | PartNumber: SG_B008GVX9EY_US | Ean: 0816881023256 | UPC: 816881023256
Couplings.
Inflator Not Included.
Chrome-Plated Brass.
Stainless Steel.
Features
- Injection-molded Thermoplastic Diaphragms
- Stainless Steel
- Couplings
- Chrome-plated Brass
- Inflator Not Included
- See more on Amazon...
Brand: Ideations Design | Manufacturer: Ideations Design
Dimensions: 2.00 x 4.00 x 2.00 Inches | Weight: 0.50 pounds
See On Amazon #12
Dive Alert Signaling Device for Scuba Dive Diving Diver BC BCD Emergency Signal DA-2X
Asin: B005LB5GM0
Full Warranty.
Brand: Dive Alert | Manufacturer: Dive Alert
See On Amazon #13
Dive Alert Surface Marker Buoy, Orange
Asin: B003DRYSFK | Model: DMB | PartNumber: DMB
Inflation: Inflation Of The Smb Can Be Done In Any Circumstance. You Can Inflate The Dmb1 With A Second Stage Regulator..
Features
- DURABLE CONSTRUCTION: Made of 400 Denier polyurethane coated nylon, this SMB will last dive after dive without issue. The nylon strap on the top allows for attachment of a light or slate.
- INFLATION: Inflation of the SMB can be done in any circumstance. You can inflate the DMB1 with a second stage regulator.
- See more on Amazon...
Brand: Dive Alert | Manufacturer: DiveAlert
Dimensions: 2.00 x 8.00 x 2.50 Inches
See On Amazon #14
Ideations Dive Alert Plus Version 2 Signaling Device - DV2 for The Oceanic Air XS, Aeris Air Link, Mares Air Control, SeaQuest AirSource 1 & 2, Apeks Octo Plus, Zeagle Octo Plus and Beauchat Venturi
Asin: B00SOYB02Q | Model: 4333695075 | PartNumber: 4333695075
Seaquest Airsource.
Zeagle Octo Plus.
Apeks Octo Plus.
Oceanic Air Xs.
Features
- Fits the following Inflators....
- Oceanic Air XS
- SeaQuest AirSource
- Apeks Octo Plus
- Zeagle Octo Plus
- See more on Amazon...
Brand: Ideations | Manufacturer: Ideations
See On Amazon #15
Marine Sports Com 2 Me Dive Signal
Asin: B00CWOYO90 | Model: 1848YW | PartNumber: 1848YW | Ean: 0806723184863 | UPC: 806723184863
Brand: Marine Sports Manufacturing
See On Amazon #16
Ideations Design DiveAlert Plus V.2 Subsurface Signaling Device - Airsource DV2 for Scuba Divers
Asin: B008QYZB8I | Ean: 0816881023263 | UPC: 816881023263
Injection-Molded Thermoplastic Body And Internal Elements.
Chrome-Plated Brass Couplings.
Stainless Steel Diaphragms.
Underwater And Surface Signaling Device.
Features
- Easy to Install
- Underwater and Surface Signaling Device
- Injection-molded Thermoplastic Body and Internal Elements
- Stainless Steel Diaphragms
- Chrome-plated Brass Couplings
- See more on Amazon...
Brand: Ideations Design | Manufacturer: Ideations Design
Dimensions: 2.00 x 4.00 x 2.00 Inches | Weight: 0.50 pounds
See On Amazon #17
Ideations Design DiveAlert Plus V-2 Subsurface Signaling Device - AIRII DV3 for Scuba Divers
Asin: B008GVX9MQ | Ean: 0816881023270 | UPC: 816881023270
Couplings.
Ss1/Octo Not Included.
Chrome-Plated Brass.
Stainless Steel.
Features
- Injection-molded Thermoplastic Diaphragms
- Stainless Steel
- Couplings
- Chrome-plated Brass
- SS1/Octo Not Included
- See more on Amazon...
Brand: Ideations Design | Manufacturer: Ideations Design
Dimensions: 2.00 x 4.00 x 2.00 Inches | Weight: 0.50 Pounds
See On Amazon
Looking For Something Else?
Search