Pro Marine Seal Kit, Lower Gearcase Johnson/Evinrude 25-50hp 2cyl 1989-1995
Asin: B01LXC26VW
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Pro Marine | Manufacturer: Pro Marine Parts
Weight: 0.63 Pounds
See On Amazon Similar To Pro Marine Seal Kit Lower
#1
TotalBoat-434282 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Pint Kit)
Asin: B00S9RBWIA | Ean: 0811932021380 | UPC: 811932021380
Easy To Mix And Apply: Foolproof 1 To 1 Mix Ratio - Just Mix The Blue And Yellow Components Until They Turn Green. Creamy Smooth Consistency Makes It Easy To Spread And Feather To A Fine Edge; Won't Sag On Vertical And Overhead Surfaces.
Choose Kit Size: 2-Pint Kit, 2-Quart Kit Or 1-Gallon Kit. Note: Totalboat Gelcoat Should Not Be Applied Directly Over Totalfair Or Gelcoat Will Not Cure Properly. Before Applying Gelcoat, Apply Totalboat 2-Part Epoxy Primer Or Totalprotect Over Totalfair.
Cures Fast. Easy To Sand And Paint: Quick-Drying Compound Is Ready To Sand In Just 3 Hours At 80°F; Cured Fairing Compound Sands Easily; Compatible With Latex And Epoxy Primers And Paints.
Super Smooth Finish For Permanent, Waterproof Repairs: Marine Filler Bonds Strongly To Damaged Areas And Cures Without Pinholes On Wood, Aluminum, Steel And Fiberglass Repair Areas; Cured Totalfair Is Waterproof; Use Above And Below The Waterline.
Features
- HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
- SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
- EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
- CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80 F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
- CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #2
TotalBoat-510822 High Performance Epoxy Kit, Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair (Quart, Medium)
Asin: B06XGPW9XQ | Model: 510822 | PartNumber: 510822 | Ean: 0811932023124 | UPC: 811932023124
Choose Slow, Medium, Or Fast Hardener To Control Working Properties And Cure Times. Slow Hardener Has The Longest Working And Cure Times. Medium Hardener Is Ideal For Most Applications. Fast Hardener Has The Shortest Working Time And Fastest Cure.
Pumps Included: Metered Resin And Hardener Pumps Provide The Exact 2 Parts Resin To 1 Part Hardener Ratio For A Proper Cure Every Time; Easy-To-Use Pumps Are Calibrated So All You Do Is Mix One Full Pump Of Hardener To Every One Full Pump Of Resin.
Choose Epoxy Kit Size: Pint, Quart, Gallon Or 2 Gallon. All Totalboat Epoxy Kits Come With Calibrated Pumps. Compatible With Epoxy Thickeners, Fillers And Coloring Agents.
Non-Blushing Epoxy System Means No Time-Consuming Washdowns To Remove Surface Blush Between Coats, So Projects Get Finished Faster. Low Odor And Low Vocs Make It Great For Shop Or Indoor Use. Cured Surface Is Bpa-Free, Safer For Potential Food Contact.
Features
- EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener
- NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact
- CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure
- CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps. Compatible with epoxy thickeners, fillers and coloring agents
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time; easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #3
Wirefy Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, a resistant Shrink Wrap - Automotive Industrial Heat-Shrink Tubing - Black, Red, White, Clear, Blue - 275 PCS
Asin: B084GWYX42 | Model: Wirefy-DWT-275 | PartNumber: Wirefy-DWT-275 | Ean: 0857409007464 | UPC: 857409007464
Variety Of Sizes - We Have Included 7 Most Commonly Used Diameters Ranging From 3/32" To 3/4". Shrink Tubing Is Precut To 1.75 Inches..
Dual Wall Tubing - Outer Wall Provides Abrasion Resistance. Inner Wall Creates Resistant Seal And Strain Relief..
Easy To Use - Simply Slide Heat Shrink Tube Over Your Connection Point And Apply Heat. Professional Connections Made In Seconds..
Glue Inside - When Heat Is Applied, Adhesive Comes Out And Seals The Connection, Creating Resistant And Long-Lasting Insulation..
Features
- 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.
- GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating resistant and long-lasting insulation.
- VARIETY OF SIZES - We have included 7 most commonly used diameters ranging from 3/32 to 3/4. Shrink tubing is precut to 1.75 inches.
- EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Professional connections made in seconds.
- DUAL WALL TUBING - Outer wall provides abrasion resistance. Inner wall creates resistant seal and strain relief.
- See more on Amazon...
Brand: Wirefy | Manufacturer: Wirefy
Dimensions: 1.38 x 7.68 x 5.12 inches | Weight: 0.04 pounds
See On Amazon #4
Zlirfy 1 Kit Gas Can Spout Replacement,Gas Can Flexible Pour Nozzle with Gas Can Vent Caps,Gas Can Nozzle,Spout Cover,Thick Rubber Pad,Bendable Nozzle Kit,Suitable for Most 1/2/5/10 Gal Oil Cans
Asin: B0C943XJQX
[Anti Overflow Design] The Air Outlet Pipe And Air Outlet Cap Are Threaded, And There Is A Rubber Seal Inside The Air Outlet Cap. Tighten The Exhaust Port Cover After Use. Even When Transporting Or Lowering The Fuel Tank, There Will Be No Oil Overflow. The Extra Rubber Rings Can Also Be Replaced In A Timely Manner..
[Applicable] The Gas Tank Nozzle Replacement Kit Is Suitable For Most 1/2/5/10 Gallon Oil Tanks. As Shown In The Figure, The Internal Thread Size Is 1-3/4-1.7 Inches, Which Can Only Be Used For Gas Tanks With A Mouth Size Of 1.75 Inches. Please Measure The Size Of Your Oil Tank Port Before Purchasing..
[Two Types Of Fuel Tank Nozzle Caps]We Have Two Types Of Fuel Tank Nozzle Caps, Suitable For Tanks Without Nozzles At The End Of The Tank. You Can Use Them Through Simple Drilling And Installation. For Another Water Tank With A Nozzle Cover At The End, You Can Replace The Old Nozzle Cover..
[High Quality Materials] These Universal Gas Tank Nozzle Replacement Kits Are Made Of High-Quality Materials, Which Have Excellent Toughness And Are Easy To Bend Without Breaking. The Thicker And Wider Rubber Washers Can Better Fit The Cover, Prevent Liquid Leakage During Refueling, And Have A Long Service Life..
Features
- [Package Includes] The package includes: 1 yellow nozzle, 2 threaded collar covers (1 coarse thread and 1 fine thread), 1 nozzle cover, 1 sealing washer for nozzle cover, 1 gasket plug for gas tank exhaust cover B, 2 exhaust covers suitable for most oil tanks in two models, and 1 drill bit of appropriate size.
- [High Quality Materials] These universal gas tank nozzle replacement kits are made of high-quality materials, which have excellent toughness and are easy to bend without breaking. The thicker and wider rubber washers can better fit the cover, prevent liquid leakage during refueling, and have a long service life.
- [Anti Overflow Design] The air outlet pipe and air outlet cap are threaded, and there is a rubber seal inside the air outlet cap. Tighten the exhaust port cover after use. Even when transporting or lowering the fuel tank, there will be no oil overflow. The extra rubber rings can also be replaced in a timely manner.
- [Two Types of Fuel Tank Nozzle Caps]We have two types of fuel tank nozzle caps, suitable for tanks without nozzles at the end of the tank. You can use them through simple drilling and installation. For another water tank with a nozzle cover at the end, you can replace the old nozzle cover.
- [Applicable] The gas tank nozzle replacement kit is suitable for most 1/2/5/10 gallon oil tanks. As shown in the figure, the internal thread size is 1-3/4-1.7 inches, which can only be used for gas tanks with a mouth size of 1.75 inches. Please measure the size of your oil tank port before purchasing.
- See more on Amazon...
Brand: Zlirfy
See On Amazon #5
GHmarine 394711 Water Pump Impeller Kit for Johnson Evinrude 8-15HP Outboard with Housing 1974-UP 18-3327
Asin: B07GBNJ6GB | Ean: 0636946577643 | UPC: 636946577643
Also Fits 391698 386697 387610 46-02855 389112 ,318875, 318999, 319989, 386685, 386886, , 388139, 389114, 391388, 391689, 393560, 394771, 777801.
If You Are Not Sure If Your Model Is Suitable, Welcome To Contact Us, We Are Happy To Serve You.
Repair Kit Contains:Impeller Pump Housing,Neoprene Impeller, Wear Plate, Pump Cup, Impeller Key, Install Bolts, ,"O"- Ring, Water Seal,Grommet.
Replace Johnson Evinrude Omc 0394711,18-3327 Mallory 9-48201 Glm 12050 Mallory 4-3327-Emp Pro 3327 Wsm 750-290.
Features
- This kit fits most Evinrude Johnson 9.9/15hp 2 Stroke & 4 Stroke
- Replace Johnson Evinrude OMC 0394711,18-3327 Mallory 9-48201 GLM 12050 Mallory 4-3327-EMP PRO 3327 WSM 750-290
- Also fits 391698 386697 387610 46-02855 389112 ,318875, 318999, 319989, 386685, 386886, , 388139, 389114, 391388, 391689, 393560, 394771, 777801
- Repair kit contains:Impeller Pump Housing,Neoprene Impeller, Wear Plate, Pump Cup, Impeller Key, Install Bolts, ,O- Ring, Water Seal,Grommet
- If you are not sure if your model is suitable, welcome to contact us, we are happy to serve you
- See more on Amazon...
Brand: GHmarine | Manufacturer: GHMARINE
See On Amazon #6
Sun Energise 13W 12V Solar Battery Charger Maintainer PRO, Built-in Smart MPPT Charge Controller, Waterproof 12 Volt Solar Panel Trickle Charging Kits for Car Auto Boat RV Marine Trailer Camper
Asin: B0B2WDSLMY | Model: SE13W-PRO | PartNumber: SE13W-PRO
ăFull ProtectionsăPrevent The Battery From Overcharge, Over-Voltage, Discharge, And Short Circuit, Reversed Polarity Protection, Ip65 Waterproof And Spark-Proof, The Battery Is Fully Protected..
ăRobust & DurableăMade Of A+ Mono Solar Cells With Efficiency Up To 21%-30%, Strong Tempered Glass And Durable Corrosion-Resistant Frame, Which Could Withstand High Temperature And Uv Irradiation, Well Built For Years. This 12V Solar Battery Maintaner Can Withstand All Weather Conditions Such As Sandstorm, Strong Wind, Thunderstorm, Blizzard, Hail, Up To 2400Pa Wind Pressure And 5400Pa Snow Load..
ăEasy To UseăThis Solar Trickle Battery Charger Starts To Charge Immediately When Battery Is Registered, All Three Cables Connections Are Plug And Play. You Can Clearly Know The Charging Status Of The Battery And Solar Panel Through The Indicator Light..
ăCompatible With Multiple BatteriesăWidely Used As A Solar Trickle Charger And Battery Charger Maintainer For Multiple 12V Dc Batteries Including Deep Cycle, Flooded, Maintenance-Free, Agm, Seal Lead Acid And Lifepo4 Lithium Battery. A Variety Of Scenarios For Car, Boat, Rv, Dump Trailer, Marine, Camper, Lawnmower, Motorcycle, Jet Ski, Tractors, Trucks, Atv, Trolling Motor, Etc..
ăImproved 3-Stages ChargingăThe Smart 3-Stages Of Charging Algorithm (Bulk, Absorption, Float) Is Improved To Better Charge And Maintain 12Volt Battery At A Stable Level For Extended Battery Life. The Charging Will Be Cut Off When Battery Has A Full Charge, And The Charging Will Be Resumed Automatically When Battery Is Not Full, Totally Free Maintenance..
Features
- Smart MPPT Technology This solar panel battery charger is crafted with SUN ENERGISE's unique smart MPPT technology. The innovative MPPT technology allows to deliver high tracking efficiency of up to 99% and peak conversion efficiency of 98%, improve 20%-30% utilization rate of solar panel system than other competitors.
- Improved 3-stages Charging The smart 3-stages of charging algorithm (Bulk, Absorption, Float) is improved to better charge and maintain 12volt battery at a stable level for extended battery life. The charging will be cut off when battery has a full charge, and the charging will be resumed automatically when battery is not full, totally free maintenance.
- Full Protections Prevent the battery from overcharge, over-voltage, discharge, and short circuit, reversed polarity protection, IP65 waterproof and spark-proof, the battery is fully protected.
- Compatible with Multiple Batteries Widely used as a solar trickle charger and battery charger maintainer for multiple 12V DC batteries including Deep Cycle, Flooded, Maintenance-free, AGM, Seal Lead Acid and LiFePO4 lithium battery. A variety of scenarios for car, boat, RV, dump trailer, marine, camper, lawnmower, motorcycle, jet ski, tractors, trucks, ATV, trolling motor, etc.
- Robust & Durable Made of A+ mono solar cells with efficiency up to 21%-30%, strong tempered glass and durable corrosion-resistant frame, which could withstand high temperature and UV irradiation, well built for years. This 12V solar battery maintaner can withstand all weather conditions such as sandstorm, strong wind, thunderstorm, blizzard, hail, up to 2400Pa wind pressure and 5400Pa snow load.
- Easy to Use This solar trickle battery charger starts to charge immediately when battery is registered, all three cables connections are plug and play. You can clearly know the charging status of the battery and solar panel through the indicator light.
- See more on Amazon...
Brand: Sun Energise | Manufacturer: Sun Energise
Dimensions: 0.60 x 9.40 x 16.50 inches | Weight: 3.21 pounds
Warranty: Extended 12 months warranty and our 7*24H Lifetime technical service support
See On Amazon #7
Clearcast 7000 Crystal Clear Epoxy Resin 1 Gallon Kit - Arts, Crafts, Coating Applications, High Gloss Shine, Durable, Self-Leveling, Low Odor, Made in USA
Asin: B099XFL1PK | Ean: 0759126162955 | UPC: 759126162955
Great Look: This Epoxy Will Cure With A Brilliant High Gloss Shine And Display Amazing Clarity. Impress Your Friends And Family With Your Mazing Art Work.
Functional: Easy Mixing, Minimal Bubbles, Self Leveling With Resists Yellowing. Easy To Work With Full Cure Within 24 Hours. 30-45 Minute Work Time..
Quality: Made In The Usa, Only The Highest Quality Products..
Durable: Long Lasting Durable Epoxy. Water Resistant, Chemical Resistant, And Rated Up To 165F. You Can Be Assured That Your Epoxy Will Last A Lifetime..
Versatile Uses: Can Be Used As A Coating Epoxy Or For Small Castings Under 1/2". Easily Make Coasters, Serving Trays, And Crafts.
Features
- EASY TO USE: 2-part 1 gallon clear epoxy resin kit, easy mixing at 1 convenient 1-1 mix ratio by volume (1 cup to 1 cup). Great for first time users. Easy instructions.
- VERSATILE USES: Can be used as a coating epoxy or for small castings under 1/2. Easily make coasters, serving trays, and crafts
- GREAT LOOK: This epoxy will cure with a brilliant high gloss shine and display amazing clarity. Impress your friends and family with your mazing art work
- DURABLE: Long lasting durable epoxy. Water resistant, chemical resistant, and rated up to 165F. You can be assured that your epoxy will last a lifetime.
- FUNCTIONAL: Easy mixing, minimal bubbles, self leveling with resists yellowing. Easy to work with full cure within 24 hours. 30-45 minute work time.
- QUALITY: Made in the USA, only the highest quality products.
- See more on Amazon...
Brand: Clearcast 7000 | Manufacturer: THE EPOXY RESIN STORE
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 8.00 Pounds
See On Amazon #8
Frienda RV Door Window Shade Cover RV Blackout Window Shade Reflective Insulation Roll Aluminum Foil RV Window Insulation Kit for RV Garage Roof Door Window Skylight Shade(Silver, 78.7 x 39.3 Inches)
Asin: B096G3TSBZ | Model: CK-Frienda-2413 | PartNumber: CK-Frienda-2413
Good Performance: Double Aluminum Foil Has Good Sealing Performance, Not Only Blocks The Sun But It Avoid Heat Loss And Keeps The Room Cool; This Reflective Insulation Also Acts As A Barrier And Protects Your Privacy With Its Opaque Foil Surface.
Wide Application: Window Insulation For Summer, Block Sunlight, Radiant Barrier, Winter Use To Keep Heat Inside, Use For Window, Attics, Garage Doors, Wall, Floor, Rv Insulation, Around Fireplaces, Etc.; Warm Tips: Due To Transportation Restrictions, The Thermal Insulation Film Is Folded In The Package, There May Be Some Creases, Please Do Not Worry, It Will Not Affect The Use Of Your Use.
Easy Installation: This Window Cover Roll Is Easy To Install And Remove; Cut Easily The Size You Want With Utility Knife Or Scissors, And Use The Self Adhesive Tape We Provide.
High Quality Material: Reflective Insulation Roll Is Made Of Reflective Double Aluminum Foil And Bubble Type Material, Its Reflective Surface Helps To Block Out The Sunshine Effectively Keep The Heat Out From The Windows, Not Easily Scratched, Which Can Be Used For A Long Time.
Features
- Aluminum Foil Roll: foil insulation roll is the ideal solution for you to isolation the heat, it can stay cool in summer heat and keep your home warm in winter, making you feel comfortable, various sizes for you to choose from
- High Quality Material: reflective insulation roll is made of reflective double aluminum foil and bubble type material, its reflective surface helps to block out the sunshine effectively keep the heat out from the windows, not easily scratched, which can be used for a long time
- Good Performance: double aluminum foil has good sealing performance, not only blocks the sun but it avoid heat loss and keeps the room cool; This reflective insulation also acts as a barrier and protects your privacy with its opaque foil surface
- Easy Installation: this window cover roll is easy to install and remove; Cut easily the size you want with utility knife or scissors, and use the self adhesive tape we provide
- Wide Application: window insulation for summer, block sunlight, radiant barrier, winter use to keep heat inside, use for window, attics, garage doors, wall, floor, RV insulation, around fireplaces, etc.; Warm tips: due to transportation restrictions, the thermal insulation film is folded in the package, there may be some creases, please do not worry, it will not affect the use of your use
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
Dimensions: 0.01 x 3.07 x 1.57 inches
See On Amazon #9
Quicksilver 8M0058391 Gear Case Drain Screw Seal, Mercury Outboards & MerCruiser, Pack of 2
Asin: B00N6DA0IK | Model: 8M0058391 | PartNumber: 8M0058391 | Ean: 0745061885639 | UPC: 745061885639
Produced To Meet Mercury Marine Original Equipment Manufacturer Specifications To Maximize The Performance Of Your Mercury And Mariner Outboard Or Mercruiser Sterndrive.
See Your Owner's Manual Or Service Manual For Specific Applications And Installation Instructions.
Features
- Used with the gear case 3/8-16 drain/fill screw found on all Mercury MerCruiser and most Mercury Outboards except those of Japanese origin
- See your owner's manual or service manual for specific applications and installation instructions
- Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive
- See more on Amazon...
First Available: 05/01/2023
Brand: Quicksilver | Manufacturer: Quicksilver
See On Amazon #10
Nilight 540PCS Mixed Quick Disconnect Electrical Insulated Butt Bullet Spade Fork Ring Solderless Crimp Terminals 22-16/16-14/12-10 Gauge Electrical Wire Connectors Assortment Kit, 2 Years Warranty
Asin: B07V35375X | Model: 50007R | PartNumber: 50007R | Ean: 0812227031954 | UPC: 812227031954
Wire Range: 22-16 ( Red )/ 16-14 ( Blue )/ 12-10 ( Yellow ) A. W. G..
Wire Terminal Connectors Are Made With Copper Core, Tin Plating And Pvc Insulator. Ideal For Garages, Auto Electricians, Mechanics, Workshops Etc. . . Suitable For Cars, Vans, Motorcycle, Homes Etc..
All Insulated Electrical Terminals Are Nicely Enclosed In Plastic Case For Easy Access And Carry..
Wire Terminals Kit Providing Strain Relief And Against Vibration In Rugged Environments, Which Excellently Insulates And Protects Electronic Connections..
Features
- 540 pcs assorted crimp terminals: ring terminals, spade Terminals, Bullet Male & female, butt Splice & connectors, fork spade, and piggy back
- Wire terminals kit providing strain relief and against vibration in rugged environments, which excellently insulates and protects electronic connections.
- Wire range: 22-16 ( Red )/ 16-14 ( Blue )/ 12-10 ( yellow ) a. W. G.
- All insulated electrical terminals are nicely enclosed in plastic case for easy access and carry.
- Wire terminal connectors are made with copper core, tin plating and PVC insulator. Ideal for garages, auto electricians, mechanics, workshops etc. . . Suitable for cars, vans, motorcycle, homes etc.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 10.00 x 6.00 Inches
Warranty: 2 Years Warranty
See On Amazon #11
Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit Marine Outboard Engine Flushing
Asin: B0773WCHP7 | Ean: 0688295880967 | UPC: 688295880967
Fits Your Boat: Compatible With Most Johnson/Evinrude, Mercury, Yamaha, Chrysler, Force, Honda, Nissan, Suzuki, And Tohatsu Outdrives; As Long As Your Boat Includes Side Water Inlet Ports, This Flusher Is For You; Rotate Muff Ears To Fit And Seal Over The Water Pick-Ups On The Lower Unit (Cups Swivel To Be Positioned Horizontally Or Vertically For A Multitude Of Ways To Put It On).
Contents: Package Includes (1) Dual Feed Flusher And (2) Quick Connect Style Hose Fittings That Easily Attach To Your Standard Garden Hose (Hose Not Included).
No Leakage: Inferior Round Cups Do Not Always Fit Correctly Over Intake Ports, But These Rectangular Cups Are Easy To Put On, Clamp Very Tightly, And Provide Maximum Water Flow In Both Intakes While Allowing For Zero Leakage Once You Start The Engine; Cup Dimensions 5 Inches X 3.25 Inches And 1.25 Inches Deep (12.7Cm X 8.3Cm X 3.2Cm); Black Coated Steel Frame For Quick And Secure Connection.
Easy Installation: Requires No Tools For Installation Or Removal; Simply Slide The Flusher Muff Cups Over The Top Of The Water Intake Slots On Your Boat And Connect Your Garden Hose To One Of The Included Quick Connect Fittings To Run Motor Out Of The Water Or Use To Winterize Motor; Never Turn Water Supply To Full Force Or Damage To Drive May Occur.
Features
- ULTIMATE DUAL FEED FLUSHER: Use the Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit Marine Outboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your outboard boat engine s lower unit cooling system when hooked up to a garden hose; Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments
- EASY INSTALLATION: Requires no tools for installation or removal; Simply slide the flusher muff cups over the top of the water intake slots on your boat and connect your garden hose to one of the included quick connect fittings to run motor out of the water or use to winterize motor; Never turn water supply to full force or damage to drive may occur
- FITS YOUR BOAT: Compatible with most Johnson/Evinrude, Mercury, Yamaha, Chrysler, Force, Honda, Nissan, Suzuki, and Tohatsu outdrives; As long as your boat includes side water inlet ports, this flusher is for you; Rotate muff ears to fit and seal over the water pick-ups on the lower unit (cups swivel to be positioned horizontally or vertically for a multitude of ways to put it on)
- NO LEAKAGE: Inferior round cups do not always fit correctly over intake ports, but these rectangular cups are easy to put on, clamp very tightly, and provide maximum water flow in both intakes while allowing for zero leakage once you start the engine; Cup dimensions 5 inches x 3.25 inches and 1.25 inches deep (12.7cm x 8.3cm x 3.2cm); Black coated steel frame for quick and secure connection
- CONTENTS: Package includes (1) dual feed flusher and (2) quick connect style hose fittings that easily attach to your standard garden hose (hose not included)
- See more on Amazon...
Brand: Redneck Convent | Manufacturer: Redneck Convent
Dimensions: 3.20 x 18.65 x 5.90 inches | Weight: 1.40 Pounds
See On Amazon #12
MERCURY OEM 100 Hour Maintenance Kit for 150HP EFI FourStroke Outboard 8M0094232
Asin: B00V8ZHXXI | Ean: 0745061938991 | UPC: 745061938991
Mercury Marine Pn: 8M0094232.
Fits: 150Hp 4-Stroke Efi Mercury Outboard.
Kit Includes: Oil Filter, Fuel Filter, Lower Unit Gearcase Drain Plug Seal.
Features
- Genuine Mercury Marine OEM Factory Original Equipment
- Kit Includes: Oil filter, Fuel filter, Lower unit gearcase drain plug seal
- Mercury Marine PN: 8M0094232
- Fits: 150hp 4-Stroke EFI Mercury Outboard
- See more on Amazon...
Brand: MERCURY | Manufacturer: Mercury Marine / Mercruiser
Weight: 0.90 pounds
See On Amazon #13
Smart Vent Insulated Foundation Flood Vent, FEMA Compliant and ICC-ES Certified - Model 1540-520, 16" x 8" (Stainless Steel)
Asin: B01BCLC9EU | Model: 1540-520 Gray | PartNumber: 1540-520 Gray | Ean: 0795092516729, 0819929001063, 0735090858643 | UPC: 819929001063, 795092516729, 735090858643
The Smart Vent Product Line Is Constructed Out Of Marine Grade Stainless Steel And Is 100% Made In The United States. T316l Stainless Steel Is Renowned For Its Ability To Withstand Usage In Harsh Marine And Chemical Environments, Ensuring That Our Products Will Handle Everything Mother Nature Throws At Them.
Easily Surface-Mounted Over Your Foundation Using Hurribond Or An Equivalent Adhesive. Finish Off Your Insulated Smart Vent Installation By Adding Our New Flood Vent Sealing Kit Which Creates A Tight Seal And Finishes Off The Interior Space.
The Lower Flood Risk Associated With The Proper Installation Of Smart Vents Can Lead To A Much Lower Insurance Premium For You Home. Save Money And Protect Your Property With Engineered Flood Vents.
Bi-Directional Flood Vent Feature Allows For The Free Entry And Exit Of Flood Water, Relieving Hydrostatic Pressure To Help Prevent Foundation Damage And Lower Your Flood Risk. Our Insulated Model Contains An Insulated Core And Weather Stripping To Keep Your Enclosure As Insulated As Possible.
Features
- Smart Vent Foundation Flood Vents are FEMA Compliant and ICC-ES Certified (ESR-2074) for 200 sq. ft. of flood protection per vent
- Bi-directional flood vent feature allows for the free entry and exit of flood water, relieving hydrostatic pressure to help prevent foundation damage and lower your flood risk. Our Insulated model contains an insulated core and weather stripping to keep your enclosure as insulated as possible
- The Smart Vent product line is constructed out of Marine Grade Stainless Steel and is 100% made in the United States. T316L Stainless Steel is renowned for its ability to withstand usage in harsh marine and chemical environments, ensuring that our products will handle everything Mother Nature throws at them
- The lower flood risk associated with the proper installation of Smart Vents can lead to a much lower insurance premium for you home. Save money and protect your property with engineered flood vents
- Easily surface-mounted over your foundation using Hurribond or an equivalent adhesive. Finish off your Insulated Smart Vent installation by adding our new Flood Vent Sealing Kit which creates a tight seal and finishes off the interior space
- See more on Amazon...
Brand: SMART VENT | Manufacturer: Smart Vent
Dimensions: 2.00 x 16.00 x 8.00 inches | Weight: 5.00 Pounds
See On Amazon #14
Tilt Trim Seal Kit 1997 & Up 115225FS Fast Strike Power for Yamaha Boat Power Units 115HP 150HP 175HP 200HP (Some 225HP 250HP) for Showa & 63P-43800-00-4D 64E-43822 with More O-Ring
Asin: B083XY565W | Ean: 7427046760638
Quality -- Made Out Of Viton A Very Super Material And Will Resist Everything From Ethanal To Uv's To Oxidation From Salt Water Environments..
Package Includes -- Seal Kit Of All 3 Cylinders And More On A 1997 Or Newer Fast Strike Trim Tilt Unit 115Hp - 250Hp.(As Pictures Show).
Application -- Seal Repair For 1997 To Current Yamaha Boat Power Trim Tilt Units 115Hp, 150Hp, 175Hp, 200Hp, 225Hp (20" Shaft), 250Hp (20" Shaft) & More. Also Fits For Suzuki, Honda, Tohatsu Nissan, All Showa Style 3 Ram Integrated Trim Tilt System. Does Not Fit Yamaha 200-300Hp 4 Stroke..
Function -- Properly Rebuilt These Seals Will Outlive The Life Of The Motor..
Features
- FITS MODELS -- Fits 60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D, 63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00, 63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D, 68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More.
- FUNCTION -- Properly rebuilt these seals will outlive the life of the motor.
- QUALITY -- Made out of Viton a very super material and will resist everything from ethanal to UV's to Oxidation from salt water environments.
- APPLICATION -- Seal repair for 1997 to Current Yamaha Boat Power Trim Tilt Units 115HP, 150HP, 175HP, 200HP, 225HP (20 Shaft), 250HP (20 Shaft) & More. Also fits for Suzuki, Honda, Tohatsu Nissan, All Showa Style 3 ram integrated trim tilt system. Does not fit Yamaha 200-300hp 4 Stroke.
- PACKAGE INCLUDES -- Seal Kit of All 3 Cylinders and More on a 1997 or Newer Fast Strike Trim Tilt Unit 115HP - 250HP.(As pictures show)
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #15
Kit King - Works with Yamaha Tilt Trim Showa Motor Seal Kit 1997 & Up 115225FS Fast Strike Power Trim Tilt, 115HP 150HP 175HP 200HP (Some 225HP 250HP) Showa, 63P-43800-00-4D 64E-43822 and More O-Ring
Asin: B07F78RJQV | Ean: 0721782292642 | UPC: 721782292642
Seal Kit Of All 3 Cylinders And More On A 1997 Or Newer Fast Strike Trim Tilt Unit 115Hp - 250Hp.
This Kit Also Fits Suzuki, Honda, Tohatsu Nissan, All Showa Style 3 Ram Integrated Trim Tilt System. Does Not Fit Yamaha 200-300Hp 4 Stroke..
Fits 60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D, 63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00, 63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D, 68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More.
Fits Yamaha Boat Power Trim Tilt Units 115Hp, 150Hp, 175Hp, 200Hp, 225Hp (20" Shaft), 250Hp (20" Shaft) & More From 1997 To Current.
Features
- Seal Kit of All 3 Cylinders and More on a 1997 or Newer Fast Strike Trim Tilt Unit 115HP - 250HP
- Fits Yamaha Boat Power Trim Tilt Units 115HP, 150HP, 175HP, 200HP, 225HP (20 Shaft), 250HP (20 Shaft) & More From 1997 to Current
- Seal Kit of All 3 Cylinders and More on a 1997 or Newer Fast Strike Trim Tilt Unit 115HP - 250HP
- Fits 60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D, 63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00, 63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D, 68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More
- This kit also fits Suzuki, Honda, Tohatsu Nissan, All Showa Style 3 ram integrated trim tilt system. Does not fit Yamaha 200-300hp 4 Stroke.
- See more on Amazon...
Brand: Kit King USA | Manufacturer: Kit King USA
See On Amazon #16
UANOFCN 394711 Impeller Water Pump Repair Kit for Johnson Evinrude with Housing 0394711 18-3327 8-15HP 1974-up
Asin: B07GDC316C | Ean: 0612409319111 | UPC: 612409319111
Replace Johnson Evinrude Omc 0394711 18-3327 Mallory 9-48201 Glm 12050 Mallory 4-3327-Emp Pro 3327 Wsm 750-290.
Package Contents: 4 X Installation Bolt 3 X Grommet 2 X O-Ring 1 X Pump Housing 1 X Pump Cup 1 X Neoprene Impeller 1 X Pin 1 X Seal 1 X Wear Plate.
Can Be Replaced With The FollowingïŒ391698 386697 387610 46-02855 389112 ,318875, 318999, 319989, 386685, 386886, , 388139, 389114, 391388, 391689, 393560, 0394771, 777801.
Fits : 9.9/15 Hp (1974-Up), 9.9/15 Hp 4-Stroke (1994-Up).
Features
- Fits most Johnson Evinrude 8-15HP 1974-UP Outboard Model.Please check Description for more details!
- Fits : 9.9/15 HP (1974-Up), 9.9/15 HP 4-Stroke (1994-Up)
- Replace Johnson Evinrude OMC 0394711 18-3327 Mallory 9-48201 GLM 12050 Mallory 4-3327-EMP PRO 3327 WSM 750-290
- Can be replaced with the following 391698 386697 387610 46-02855 389112 ,318875, 318999, 319989, 386685, 386886, , 388139, 389114, 391388, 391689, 393560, 0394771, 777801
- Package Contents: 4 X Installation Bolt 3 X Grommet 2 X O-Ring 1 X Pump Housing 1 X Pump Cup 1 X Neoprene Impeller 1 X Pin 1 X Seal 1 X Wear Plate
- See more on Amazon...
Brand: UANOFCN | Manufacturer: UANOFCN
See On Amazon #17
Auxbeam 4 Inch V-MAX Series LED Pods with Side Shooter, 92W Round Offroad Driving Lights with Amber DRL, Super Bright 270 Wide Range Spot Flood Combo Light Bar Auxiliary Light with Wiring Harness Kit
Asin: B0C495P293 | Model: ZD000762 | PartNumber: ZD000762
đăVersatile Amber Daytime Running LightsăOur Product Features Stylish Amber Drl, Paired With Dual Led Types Lighting To Guarantee Brighter And More Uniform Light Output. The Amber Drl Design Not Only Enhances The Overall Aesthetics But Also Serves Multiple Functions. It Can Be Used As A Reversing Light, Fog Light, Or Warning Light, Adding An Extra Layer Of Safety To Your Driving Experience..
đăEasy To InstallăWith Included Mounting Instructions, Just Plug & Play. The Adjustable Angle Allows For Easy Mounting On Your Bumper, Roof, Front Windshield, Or Any Other Location. The Led Pod Lights Are Perfect For Use As Off-Road Lights, Work Lights, Fog Lights, Driving Lights, And More..
â
ăAuxbeam Package & SupportăThis Package Includes 2Pcs 4-Inch Led Pod Lights, A Dt Wiring Harness Kit (Up To 10 Feet), Accessories, And A User Manual. We Offer A 2-Year Quality Warranty And 24-Hour Online After-Sale Support. If You Have Any Questions Please Contact Us Via Amazon..
đăHigh-Quality ControlăBuilt To Withstand Harsh Weather And Conditions, These Lights Boast An Ip68 Waterproof Rating And An Anti-Corrosion Aluminum Body. They Protect Against Raindrops, Dirt, Sand, And High Temperatures While Drawing Minimal Power, With An Estimated Lifespan Of Up To 50,000 Hours..
đăSuperior Lighting PerformanceăOur Lights Are Equipped With P8 High-Intensity Chips And High Light Transmission. With 9Pcs Spot Light Deep Projector Cups And 6Pcs Outer Side Leds, These Professionally Tested Lights Deliver A Bright White 6500K And 3000K Amber Illumination, Elevating Your Lighting Visibility To Unprecedented Levels..
Features
- RELIABLE LIGHTING EFFECT Auxbeam 4" 92W LED Pod Lights are adopting 8 x P8 & 3030 SMD high intensity chips, upgraded PC lens for high light transmission, and a combination of flood and spot beams for wider, longer illumination. Eliminate blind areas, allowing you to easily see your surroundings anytime, anywhere!
- SUPERIOR LIGHTING PERFORMANCE Our lights are equipped with P8 high-intensity chips and high light transmission. With 9pcs Spot Light deep projector cups and 6pcs outer side LEDs, these professionally tested lights deliver a bright white 6500k and 3000K Amber illumination, elevating your lighting visibility to unprecedented levels.
- VERSATILE AMBER DAYTIME RUNNING LIGHTS Our product features stylish amber DRL, paired with dual LED types lighting to guarantee brighter and more uniform light output. The amber DRL design not only enhances the overall aesthetics but also serves multiple functions. It can be used as a reversing light, fog light, or warning light, adding an extra layer of safety to your driving experience.
- HIGH-QUALITY CONTROL Built to withstand harsh weather and conditions, these lights boast an IP68 waterproof rating and an anti-corrosion aluminum body. They protect against raindrops, dirt, sand, and high temperatures while drawing minimal power, with an estimated lifespan of up to 50,000 hours.
- EASY TO INSTALL With included mounting instructions, just plug & play. The adjustable angle allows for easy mounting on your bumper, roof, front windshield, or any other location. The LED pod lights are perfect for use as off-road lights, work lights, fog lights, driving lights, and more.
- AUXBEAM PACKAGE & SUPPORT This package includes 2pcs 4-inch LED pod lights, a DT wiring harness kit (up to 10 feet), accessories, and a user manual. We offer a 2-year quality warranty and 24-hour online after-sale support. If you have any questions please contact us via Amazon.
- See more on Amazon...
Brand: Auxbeam | Manufacturer: Auxbeam
Dimensions: 4.45 x 9.65 x 9.45 Inches | Weight: 4.98 pounds
Warranty: 2 year.
See On Amazon #18
REPLACEMENTKITS.COM - Lower Gearcase Seal Kit fits Mercruiser Alpha OneGen II Only Replaces 26-816575A3 & 18-2646-1 -
Asin: B07KPMGHC8 | Ean: 0850002360219 | UPC: 850002360219
Comes With Full Pump Base With Oil Seals Installed.
100% Satisfaction Guaranteed.
Replacement Kits Brand Aftermarket Kit.
Replaces 26-816575A3 & 18-2646-1.
Features
- Fits Mercruiser Alpha One(Gen II Only
- Replaces 26-816575A3 & 18-2646-1
- Comes with full Pump Base with Oil Seals Installed
- Replacement Kits Brand Aftermarket Kit
- 100% Satisfaction Guaranteed
- See more on Amazon...
Brand: REPLACEMENTKITS.COM | Manufacturer: Replacement Kits
See On Amazon #19
Sierra International 18-2613 Outdrive Gasket Set Large
Asin: B00144EOOE | Model: 18-2613 | PartNumber: 18-2613 | Ean: 0030999312556, 6391847860556 | UPC: 030999312556
Built To Perform.
First Available: 12/03/2011
Brand: SIERRA INTERNATIONAL INC. | Manufacturer: Teleflex Marine
Dimensions: 1.00 x 12.00 x 9.00 inches | Weight: 0.10 Pounds
Warranty: Limited Warranty
See On Amazon #20
SeaSierra 433550 Lower Unit Seal Kit for Johnson Evinrude Outboard 2-Cyl Engine 40 48 50 HP 1989-2005 Sierra 18-2694
Asin: B0CQJZ59ZT | Model: Sealing Kit 87614 777551 | PartNumber: Sealing Kit 87614 777551 | Ean: 0739325435418 | UPC: 739325435418
Replaces Part#: Johnson / Evinrude 0433550 433550 0777551 777551, Glm 87614, Mallory 9-74104, Sierra 18-2694.
Made Of High-Quality Materials, Durable And Reliable. Delivery Guaranteed Timeliness, Safe And Convenient.
Package Contains: 1 X Gearcase Seal Kit (Include 20 Pcs) And 1 X Install Instruction, Detailed Accessories As Shown In The Picture.
Fits Johnson / Evinrude 40Hp 48Hp 50Hp 2-Stroke Outboard Lower Units From 1989-2005.
Features
- This Lower Unit Gearcase Seal Kit for Johnson Evinrude Outboard Motor meets or exceeds OEM specifications
- Fits Johnson / Evinrude 40HP 48HP 50HP 2-Stroke Outboard Lower Units from 1989-2005
- Replaces Part#: Johnson / Evinrude 0433550 433550 0777551 777551, GLM 87614, Mallory 9-74104, Sierra 18-2694
- Package contains: 1 X Gearcase Seal Kit (include 20 PCS) and 1 X Install Instruction, Detailed Accessories as Shown in the Picture
- Made of High-Quality Materials, Durable and Reliable. Delivery Guaranteed Timeliness, Safe and Convenient
- See more on Amazon...
Brand: SeaSierra | Manufacturer: SeaSierra Marine Boat Engine Parts Manufacturer
Warranty: 90 days
See On Amazon ï»ż
Looking For Something Else?
Search