Dakota Digital Pressure Expansion Module For VFD3 VHX Gauge Systems BIM-03-2
Asin: B01LXP2NUB
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Pressure Inputs: Pressure (Generic Fluid Or Air), Fuel Pressure, Air Pressure, Boost/Vacuum, Nos Pressure.
Senders Are Required For This Item To Work, Sold Separately In Our Store. Senders Are Not Included..
Bim-03-2 Utilizes Solid State Pressure Senders To Give You Phenomenal Accuracy (*See Resolutions In Chart In Images)..
Features
- The BIM-03-2 is pressure module that allows you to display additional pressure readings within your VFD3 (rev G), VHX, HDX or RTX gauges.
- BIM-03-2 utilizes Solid State Pressure senders to give you phenomenal accuracy (*see resolutions in chart in images).
- Pressure Inputs: Pressure (generic fluid or air), Fuel Pressure, Air Pressure, Boost/Vacuum, NOS Pressure
- Senders are required for this item to work, sold separately in our store. Senders are NOT included.
- See more on Amazon...
Brand: Dakota Digital | Manufacturer: Dakota Digital
See On Amazon Similar To Dakota Digital Pressure Expansion Module
#1
Dakota Digital SGI-100BT Universal Speedometer and Tachometer Interface
Asin: B07YQ7P8SN | Model: SGI-100BT | PartNumber: SGI-100BT | Ean: 0670219147096 | UPC: 670219147096
Diesel Applications: Outputs For 4, 6 Or 8 Cylinder Tachs. Can Read Off Flywheel Sensor (Available Separately), Timing Gear Sensor Or Alternator W-Terminal (Stator Tap)..
Not For Use With Abs Sensors Or Systems. *Product Not Compatible With Most '86 To Current European Or '96 To Current Jeep Tachometers..
Bluetooth Technology Syncs Unit To Available Mobile App For Programming And Setup. Built-In Programming Buttons And Led Display For Setup In Lieu Of App..
Speed Calibration From 25% - 400%. Multiple Speed Outputs Available For Multiple Devices. Electronic Pull-Up Built In; High Or Low Voltage Input. Tachometer Settings From 1-16 Cylinders And 5V Or 12V Signal Type..
Features
- The functionality of three devices in one 4 x 2 x 1 case! The SGI-100BT can adjust/split/recalibrate an electronic speed signal, calibrate a tach signal, and aid in the creation and adjustment of a gas tach signal for diesel swap applications!
- Speed calibration from 25% - 400%. Multiple speed outputs available for multiple devices. Electronic pull-up built in; high or low voltage input. Tachometer settings from 1-16 cylinders and 5V or 12V signal type.
- Diesel applications: outputs for 4, 6 or 8 cylinder tachs. Can read off flywheel sensor (available separately), timing gear sensor or alternator W-terminal (stator tap).
- Bluetooth technology syncs unit to available mobile app for programming and setup. Built-in programming buttons and LED display for setup in lieu of app.
- Not for use with ABS sensors or systems. *Product not compatible with most '86 to current European or '96 to current Jeep tachometers.
- See more on Amazon...
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 3.00 x 7.00 x 4.00 inches | Weight: 0.25 Pounds
See On Amazon #2
Dakota Digital OBDII / CAN Interface VHX VFD3 Expansion Module Plug-In BIM-01-2
Asin: B01LZ912XQ | Model: BIM-01-2 | PartNumber: BIM-01-2 | Ean: 0670219089624 | UPC: 670219089624
*The Bim-01-2 Is Designed To Decode The Information Provided By The Ecm Through Obd-Ii And Supply This Information To The Rtx, Hdx, Vhx And Vfd3 Systems With A Black Plastic Control Module. For Any Bim-Compatible Control Boxes Which Contain The 3.5Mm Headphone Jack Bim Input, Add Part Number 394193 Adaptor Harness. Earlier Instrument Systems With An Aluminum Control Module Are Not Capable Of Bim Connectivity.
****Gm Connect & Cruise Packages Do Not Transmit The Gear Position Data, Preventing The Bim-01-2 From Acquiring This Information..
**The Bim-01-2 Is Designed For J1850 And Can Obd Protocols Only. Compatible With Obdii Protocols Sae J1850 Vpw, Sae J1850 Pwm And Iso 15765 Can 500K 11 Bit Identifiers That Follow The Sae J1979 Pid Protocol..
The Following Info Will Be Output To Dakota Digital Systems By The Bim-01-2: Speed, Tach, Engine Temp..
Features
- The BIM-01-2 OBD-II (J1850/CAN) Interface allows you to plug directly into the engine diagnostic port, extracting engine and transmission data from the vehicle's computer (ECM).
- The following info will be output to Dakota Digital systems by the BIM-01-2: speed, tach, engine temp.
- *The BIM-01-2 is designed to decode the information provided by the ECM through OBD-II and supply this information to the RTX, HDX, VHX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity
- **The BIM-01-2 is designed for J1850 and CAN OBD protocols only. Compatible with OBDII protocols SAE J1850 VPW, SAE J1850 PWM and ISO 15765 CAN 500k 11 bit identifiers that follow the SAE J1979 PID protocol.
- ****GM Connect & Cruise packages do not transmit the gear position data, preventing the BIM-01-2 from acquiring this information.
- See more on Amazon...
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 2.40 x 5.70 x 5.40 Inches
See On Amazon #3
Dakota Digital GSS-3000 Universal Sender Unit for Gear Shift Position Indicator
Asin: B083T9TMCK | Model: GSS-3000 | PartNumber: GSS-3000 | Ean: 0670219148468 | UPC: 670219148468
User-Calibrated For 2-4 Forward Shifter Detent Locations, Plus Park, Reverse And Neutral..
Stainless Steel And Aluminum Mounting Hardware Included For A Variety Of Transmissions..
Easy Setup And Calibration..
Features
- Built-in outputs for reverse lights (up to 15 amps) and neutral safety switch (with supplied 30amp relay).
- Easy setup and calibration.
- User-calibrated for 2-4 forward shifter detent locations, plus Park, Reverse and Neutral.
- Stainless steel and aluminum mounting hardware included for a variety of transmissions.
- See more on Amazon...
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 2.60 x 9.50 x 6.70 inches
See On Amazon #4
Dakota Digital OBD-II OBDII Speedometer / Tachometer Interface Module STA-1000
Asin: B01M2XCILK | Model: 4350404367 | PartNumber: 4350404367
+/-25% Speed Signal Correction, Compensating For Tire Size Or Gearing Changes.
Compatible With J1850 And Can Obdii Protocols**. **Compatible With Obdii Protocols Sae J1850 Vpw, Sae J1850 Pwm And Iso 15765 Can 500K 11 Bit Identifiers That Follow The Sae J1979 Pid Protocol..
Adjustable 4, 6 Or 8 Cylinder Tachometer Signal Output. Check Engine Light Output Provides A Grounded (-) Output To Activate A Check Engine Light Of Your Choice..
User Selectable Output Of: 4K, 8K, 16K Ppm Signals, Sine Or Square Wave Options.
Features
- The STA-1000 plugs directly into the OBDII diagnostic connector, providing a user-adjustable traditional Speedometer, Tachometer and Check-Engine output for your choice of aftermarket instruments.
- User selectable output of: 4k, 8k, 16k PPM signals, Sine or Square wave options
- +/-25% speed signal correction, compensating for tire size or gearing changes
- Adjustable 4, 6 or 8 cylinder tachometer signal output. Check Engine light output provides a grounded (-) output to activate a check engine light of your choice.
- Compatible with J1850 and CAN OBDII protocols**. **Compatible with OBDII protocols SAE J1850 VPW, SAE J1850 PWM and ISO 15765 CAN 500k 11 bit identifiers that follow the SAE J1979 PID protocol.
- See more on Amazon...
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 2.00 x 7.00 x 5.00 inches | Weight: 1.00 Pounds
See On Amazon #5
Dakota Digital 1/8" NPT Fuel Oil Pressure Sender 0-100psi for use with BIM-03-2 VHX VFD3 HDX RTX Systems SEN-03-8
Asin: B01LZNELH5 | Ean: 0670219102576 | UPC: 670219102576
Includes 10 Foot Wire Harness.
Features
- SEN-03-8 - Fuel / Oil Pressure Sender Solid State 0-100psi
- Includes 10 foot wire harness
- See more on Amazon...
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 6.69 x 0.79 x 3.94 Inches
See On Amazon #6
Dakota Digital MLX-3004-K MLX Series Gauge Speedometer/Tachometer - 3-3/8in.
Asin: B08FCQJGWY | Model: MLX-3004-K | PartNumber: MLX-3004-K | Ean: 0670219138742 | UPC: 670219138742
Features
- The MLX-2011 has the ability to display oil pressure and oil temperature information with installation of sensors available separately.
- See more on Amazon...
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 5.00 x 9.00 x 5.00 inches | Weight: 1.10 pounds
Warranty: Manufacturer Warranty
See On Amazon #7
Dakota Digital HOL EFI Interface
Asin: B07WZJRT7F | Model: BIM-01-2-HLLY | PartNumber: BIM-01-2-HLLY | Ean: 0670219126084 | UPC: 670219126084
Brand: Dakota Digital | Manufacturer: HOL EFI INTERFACE
Dimensions: 2.30 x 5.70 x 3.30 inches
Warranty: Limited warranty.
See On Amazon #8
Dakota Digital GSS-2000 Universal Gear Shift Sending Unit Dakota Digital
Asin: B00455BNOI
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 8.00 x 8.00 x 8.00 inches | Weight: 3.00 pounds
Warranty: Yes
See On Amazon #9
Dakota Digital 128K Pulse Generator - SEN-01-128 Fits GM automatics: TH350 TH400 700r4 200r4 + more
Asin: B00LLPHMAO | Model: SEN-01-128 | PartNumber: SEN-01-128 | Ean: 0635040943118 | UPC: 635040943118
With A Standard Female 7/8” Thread-On Fitting, The Sen-01-128 Fits All Gm Transmissions With A Mechanical Speedometer Cable Outlet..
Fits Gm Transmission Models With 7/8” Male Threading, Ie: Th350, Th400, 700R4, 2004R, Etc..
Removable Weather-Tight 10’ Cable Provides For Simple Installation And Cable Routing. 128,000 Pulse Per Mile Square Wave Signal Output Is Direct Replacement For The Stock Gm Internal Speed Sensor, Allowing The Ecm Receive The Signals It Needs For Proper Operation..
The Sen-01-128 Can Now Recreate This Missing High Frequency Rate When Converting To An Older Style Transmission With A Mechanical Speedometer Output..
Features
- With late-model GM transmissions containing an internal speed sensor outputting 128,000 Pulses Per Mile, the stock 40-tooth (40 pulse per revolution) reluctor ring provided the factory ECM with a high frequency input.
- The SEN-01-128 can now recreate this missing high frequency rate when converting to an older style transmission with a mechanical speedometer output.
- With a standard female 7/8 thread-on fitting, the SEN-01-128 fits all GM transmissions with a mechanical speedometer cable outlet.
- Removable weather-tight 10 cable provides for simple installation and cable routing. 128,000 Pulse Per Mile Square Wave signal output is direct replacement for the stock GM internal speed sensor, allowing the ECM receive the signals it needs for proper operation.
- Fits GM transmission models with 7/8 Male Threading, ie: TH350, TH400, 700r4, 2004r, etc.
- See more on Amazon...
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 1.20 x 7.00 x 5.30 Inches
See On Amazon #10
Dakota Digital Electronic Speedometer Recalibration Module SIM-1A
Asin: B071NR5XCJ | Model: SIM-1A | PartNumber: SIM-1A
Features
- This module allows you to recalibrate most 95-06 OEM electronic speedometers when changing tire size, pulley, or final gearing
- See more on Amazon...
First Available: 06/23/2023
Brand: Dakota Digital | Manufacturer: Dakota Digital
Dimensions: 0.80 x 4.60 x 3.60 inches | Weight: 2.40 Pounds
Warranty: Manufacturer Warranty
See On Amazon
Looking For Something Else?
Search