Peachtree Woodworking Supply Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8" x 3-3/4" x 1/2" Throat Plate Opening
Asin: B01M24FNRJ | Model: 4133 | PartNumber: 4133 | Ean: 0814310018200 | UPC: 814310018200
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Another Great Reason To Use A Zero Clearance Insert Is To Help Reduce That Pesky And Irritating Tear Out You Always Tend To Get On Your Cuts. Without A Zero Clearance, The Wood Has No Support By The Blade To Prevent The Wood From Tearing Out. This Is Especially True When Cutting Plywood. Zero Clearance Inserts Help Prevent Tear Out By Essentially Enveloping The Blade On All Sides Which Doesn’T Allow The Wood To Tear Out Since There Is Not Gap Between The Blade And Insert..
This Zero Clearance Insert Is Made From A High Density Phenolic Material That Was Chosen For Its Ability To Stand Up To Everyday Workshop Use. The Insert Features Two Snug Fit Sand-Able Side Tabs That Allow You To Remove A Little Material At A Time For A Perfect Fit If Necessary. The Insert Also Features A Top And A Side Snug Fit Screw For A Tight Fit To You Saw With No Movement!.
Zero Clearance Inserts Can Be Used In Conjunction With Most Any Table Saw Blade Including Thin Kerf, Standard Kerf And Carbide Tipped Blades. You Can Also Use Zero Clearance Inserts With Dado Blade Sets. The Reason You Would Use Zero Clearance Inserts With Dado Blades Is To Reduce The Amount Of Tear Out The Dado Blade Set Produces. We Recommend That You Use Separate Zero Clearance Inserts For Dado Blades Since The Gap For Dados Will Be Much Wider Than Standard Width Table Saw Blades..
If You Own A Table Saw, Then You Probably Have Had Smaller Pieces Of Wood Get Caught Between The Saw Blade And The Factory Supplied Throat Plate Opening. This Can Cause That Piece Of Wood To Jam Up Against The Blade And Go Flying Across The Room Or Worse Yet, Right Back At You. Zero Clearances Help Minimize This Situation From Happening Since There Is No Gap Between The Blade And The Zero Clearance Opening. The Opening Is More Like A Custom Slot Cut To The Exact Width Of Your Table Saw Blade..
Features
- MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown.
- If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade.
- Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywood. Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn t allow the wood to tear out since there is not gap between the blade and insert.
- Zero Clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. You can also use zero clearance inserts with dado blade sets. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. We recommend that you use separate zero clearance inserts for dado blades since the gap for dados will be much wider than standard width table saw blades.
- This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. The insert features two Snug Fit sand-able side tabs that allow you to remove a little material at a time for a perfect fit if necessary. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement!
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
Dimensions: 0.50 x 13.74 x 3.75 inches | Weight: 1.23 pounds
See On Amazon Similar To Peachtree Woodworking Supply Phenolic Zero
#1
MICROJIG GRR-RIPPER SP-2TK Mj Splitter Steelpro Tk
Asin: B00B03PMY0 | Model: SP-2-TK | PartNumber: SP-2-TK | Ean: 7241870774766, 0815267010262, 0787721614722, 5915903681346 | UPC: 815267010262, 787721614722
Finally, A Table Saw Splitter That Is Easy To Install, Easy To Use, Easy To Align, And Doesn't Get In The Way.
For 10" Thin Kerf Saw Blades.
Tough To The Core. The Mj Splitter Steelpro Tk Has 100% Polycarbonate Shell Reinforced With A Solid Stainless Steel Foundation. Able To Take On The Stress Caused By Many Solid Woods. The Steelpro Will Greatly Reduce The Chance Of Kickback On Your Table Saw And Virtually Eliminate Burning.
Table Saw Safety For Your Toughest Cuts.
Features
- Precision splitters made with stainless steel.
- Table saw safety for your toughest cuts
- Finally, a table saw splitter that is easy to install, easy to use, easy to align, and doesn't get in the way
- Tough to the core. The MJ Splitter SteelPro TK has 100% polycarbonate shell reinforced with a solid stainless steel foundation. Able to take on the stress caused by many solid woods. The SteelPro will greatly reduce the chance of kickback on your table saw and virtually eliminate burning
- For 10 Thin Kerf Saw Blades
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: MICROJIG, Inc.
Dimensions: 4.00 x 4.00 x 0.50 inches | Weight: 0.35 pounds
Warranty: Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only
See On Amazon #2
MICROJIG GRR-RIPPER SP-0125 Mj Splitter For 1/8" Kerf Saw Blades By Table Saw Safety Splitter System, Multi-Colored
Asin: B00BXL3TVM | Model: SP-0125 | PartNumber: SP-0125 | Ean: 0732233475354, 0815267010248, 0810948012924 | UPC: 815267010248, 732233475354, 810948012924
Mini-Featherboard Technology Keeps The Workpiece Against The Fence And Prevents Burning.
Voted Best New Tool By Popular Woodworking, Chris Schwartz.
Simple Instructions And Installation Drill Guide Included.
Installs Directly To Phenolic, Wood Or Plastic Zero Clearance Inserts (Throatplates).
Features
- The original aftermarket splitter for table saws for preventing kickback (for 1/8" kerf saw blades)
- Installs directly to Phenolic, wood or plastic Zero Clearance Inserts (Throatplates)
- Mini-featherboard technology keeps the workpiece against the fence and prevents burning
- Simple instructions and installation drill guide included
- Voted Best New Tool by Popular Woodworking, Chris Schwartz
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: MICROJIG, Inc.
Dimensions: 4.00 x 4.00 x 0.50 inches | Weight: 0.10 pounds
Warranty: Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only
See On Amazon #3
Peachtree Woodworking Supply Delta UHMW Zero Clearance Table Saw Insert Approx Dims 13-3/8in x 3-3/4in x 1/2in
Asin: B000H6FQZQ | Ean: 0810948010685 | UPC: 810948010685
Insert Comes With Leveling Screws And Rear Safety Pin.
Please Check Your Length,Width And Thickness Of Your Current Insert Before Ordering.
13 3/8" X 3 3/4" X 1/2" Thick- Made Of Uhmw.
Helps To Prevent Tear-Out And Closes The Large Factory Gap Between Blade And Insert..
Features
- The insert is blank so you can custom fit the blade slot for standard Kerf, Thin Kerf or Dado blades
- Helps to prevent tear-out and closes the large factory gap between blade and insert.
- Insert comes with leveling screws and rear safety pin
- 13 3/8 x 3 3/4 x 1/2 thick- Made of UHMW
- Please check your Length,Width and Thickness of your current insert before ordering
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc
See On Amazon #4
Fulton New Craftsman/Rigid Phenolic Zero Clearance Insert for Table Saws 14" x 3-3/4" x 3/16"
Asin: B01M8IFVRZ | Ean: 0814310018187 | UPC: 814310018187
Fits New Craftsman / Rigid Various Models Of Table Saws.
Zero Clearance Inserts Can Be Used With Any Type Of Standard Saw Blade (Standard Or Thin Kerf Blades) And Can Also Be Used With Dado Blades..
Please Check Your Length X Width X Thickness Of Your Current Insert Before Ordering.
Made From: Phenolic Material.
Features
- Insert Dimensions: 14 x 3-3/4 x 3/16"
- Made from: Phenolic Material
- Fits New Craftsman / Rigid various models of table saws
- Please check your Length x Width x Thickness of your current insert before ordering
- Zero clearance inserts can be used with any type of standard saw blade (standard or thin kerf blades) and can also be used with dado blades.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
See On Amazon #5
Fulton Woodworking Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert PW952 Approx Dims 14-3/8 in x 3-3/4 in x 3/32 in
Asin: B000H6JBNE | Ean: 0810948010654 | UPC: 810948010654
Includes Side And End Adjustment Screws; Pre-Cut Blade Bottom Pocket.
Please Check The Length, Width And Thickness Of Your Insert Before Ordering.
14 3/8" X 3 3/4" X 3/32" Thick.
Helps To Prevent Tear Out Made From High-Density Phenolic Laminate With A Bonded-Melamine Surface.
Features
- The Vintage Craftsman insert is blank so you can custom fit the blade slot by passing your blade through it.
- Helps to prevent tear out made from high-density phenolic laminate with a bonded-melamine surface
- Includes side and end adjustment screws; pre-cut blade bottom pocket
- 14 3/8 X 3 3/4 X 3/32 thick
- Please CHECK the Length, Width and Thickness of your insert before ordering
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.00 Pounds
See On Amazon #6
Peachtree Woodworking Powermatic 66 Table Saw Zero Clearance Insert PW957 Approx Dims 14-7/16 in x 4 in x 7/16 in
Asin: B000H440AA | Ean: 0810948010708 | UPC: 810948010708
14 7/16" X 4" - Made Of Uhmw.
Helps To Prevent Tear-Out Plus Close The Large Factory Gap..
Features
- The insert is blank so you can custom fit the blade slot by passing your blade through it.
- Helps to prevent tear-out plus close the large factory gap.
- 14 7/16 x 4 - Made of UHMW
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #7
Fulton Jet, Grizzly, Power Matic 64 Zero Clearance Insert for Table Saws
Asin: B01MAWFOO4 | Model: AMZ-4134 | PartNumber: AMZ-4134 | Ean: 0814310018217 | UPC: 814310018217
Small Jet, Grizzly, Powermatic 64 Insert Will Fitvarious Models Of Table Saws..
Please Check Your Length X Width X Thickness Of Your Current Insert Before Ordering.
Includes Leveling Screws, Side And End Adjustment Screws;Pre-Cut Blade Bottom Pocket.
Made From High-Density Phenolic Laminate With A Bonded-Melamine Surface.
Features
- Insert Dimensions: 12-1/2 x 3-9/16 x 7/16 - JT-164 Jet/Powermatic 64A Zero-Clearance Table Saw Insert
- Made from high-density phenolic laminate with a bonded-melamine surface
- Small Jet, Grizzly, Powermatic 64 insert will fitvarious models of table saws.
- Includes leveling screws, side and end adjustment screws;pre-cut blade bottom pocket
- Please check your Length x Width x Thickness of your current insert before ordering
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
See On Amazon #8
Fulton Phenolic Zero Clearance Insert fits Older Craftsman Table Saws 14-3/8" x 3 3/4" x 3/16" 4132
Asin: B01M3Q0XQS | Ean: 0814310018194 | UPC: 814310018194
Fits Older Craftsman Insert (4132) Fits Various Models Of Table Saws..
Zero Clearance Inserts Can Be Used With Any Type Of Standard Saw Blade (Standard Or Thin Kerf Blades) And Can Also Be Used With Dado Blades.
Please Check Your Length X Width X Thickness Of Your Current Insert Before Ordering.
Made From: Phenolic Material.
Features
- Insert Dimensions: 14-3/8 x 3 3/4 x 3/16
- Made from: Phenolic Material
- Fits Older Craftsman insert (4132) fits various models of table saws.
- Please check your Length x Width x Thickness of your current insert before ordering
- Zero clearance inserts can be used with any type of standard saw blade (standard or thin kerf blades) and can also be used with dado blades
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
See On Amazon #9
Powermatic 2000 Table Saw Insert By Peachtree Woodworking PW3390 Approx Dims 17-7/8 in x 4-7/32 in x 1/2 in
Asin: B004AG54QK | Ean: 0810948019732 | UPC: 810948019732
Designed To Fit Powermatic 2000 Table Saws Only.
Please Check Your Length X Width X Thickness Of Your Current Insert Before Ordering.
Made From: Phenolic Material.
Features
- Insert Dimensions: 17 7/8" x 4 7/32" x 1/2"
- Made from: Phenolic Material
- Designed to fit Powermatic 2000 Table Saws only
- Please check your Length x Width x Thickness of your current insert before ordering
- See more on Amazon...
Manufacturer: Peachtree Woodworking
Weight: 0.63 pounds
See On Amazon
Looking For Something Else?
Search