The Stop Shop Flex Hose Retaining Clip
Asin: B01MYZ0SCR | Model: SUVELAM | PartNumber: SUVELAM
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Gold Cadmium Plating.
Silver Zinc Plating.
Features
- Secures brake hose to bracket where it meets the steel brake line
- Silver Zinc Plating
- Gold Cadmium Plating
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
Weight: 0.04 pounds
See On Amazon Similar To The Stop Shop Flex Hose
#1
The Stop Shop 10 MM Copper Crush Washers - Pack of 20 - Fits on 10 MM Bolt
Asin: B01N4D8GJQ | Model: CW10MM | PartNumber: CW10MM
Often Used On Caliper Banjo Bolts.
Pack Of 20 Pcs..
Crush Washer.
Features
- .403" I.D. .585" O.D. .045" Thickness
- Crush Washer
- Often used on Caliper Banjo Bolts
- Pack of 20 Pcs.
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #2
The Stop Shop 5/16" (.312") Copper Nickel Roll/Coil of Fuel or Transmission Line - 25 ft.
Asin: B015YGRDDG | Model: BL9CN | PartNumber: BL9CN
Many Local Parts Stores Rent Out Flaring Tools *.
International Products Have Separate Terms, Are Sold From Abroad And May Differ From Local Products, Including Fit, Age Ratings, And Language Of Product, Labeling Or Instructions.
Many Local Parts Stores Rent Out Flaring Tools Free.
Features
- Cupronickel Bends and Flares with Ease
- Many local parts stores rent out flaring tools free
- Many local parts stores rent out flaring tools *
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
Dimensions: 0.04 x 300.00 x 0.31 Inches
See On Amazon #3
The Stop Shop Universal Rear Braided Stainless Brake Hose, 21" Long with mouting block, Made in USA
Asin: B08M27MPR1
7/16-24 Female Inlet For Inverted Flare.
Made In Usa.
20 1/2" Long, To The Center Of Hole In Mounting Block.
Attached Mounting Block With 2 - 3/8-24 Ports For Rear Axle Brake Lines.
Features
- This item is not vehicle specific, you will need to check the length of the hose as well as the inlet sizes on this item
- Attached mounting block with 2 - 3/8-24 ports for rear axle brake lines
- 7/16-24 female inlet for inverted flare
- 20 1/2 Long, to the center of hole in mounting block
- Made in USA
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
Dimensions: 0.04 x 21.00 x 20.50 inches
See On Amazon #4
The Stop Shop 7/16" Copper Crush Washers - Pack of 20 - Fits on 7/16" Bolt
Asin: B01MTZWSSO
Often Used On Caliper Banjo Bolts.
Pack Of 20 Pcs..
Crush Washer.
Features
- .450" I.D. .670" O.D. .045" Thickness
- Crush Washer
- Often used on Caliper Banjo Bolts
- Pack of 20 Pcs.
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #5
The Stop Shop Universal Rubber Brake Hose, 15 1/2" Long with 10mm Banjo (Includes Clips)
Asin: B01MV6GLFG
Includes: 2 Hoses & 2 Clips.
3/8-24 Female Inlet For Inverted Flare (Most Common 3/16 Tube Nut).
15 3/16" Long From Inlet To Center Of Banjo Head.
Commonly Used In Classic Car Disc Brake Conversions.
Features
- These are not vehicle specific, please see the bullet points for the length and banjo sizes and check your application
- Commonly used in classic car disc brake conversions
- Includes: 2 hoses & 2 clips
- 15 3/16 long from inlet to center of banjo head
- 3/8-24 female inlet for inverted flare (most common 3/16 tube nut)
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #6
The Stop Shop Braided Stainless Brake Hose (THIS IS NOT A VEHICLE SPECIFIC HOSE, please see bullet points for fitment sizes) 15 1/4 Inches Long with 10mm Banjo Holes (Includes Hardware) Made in USA
Asin: B01N0OFGVW
Includes: 2 Hoses, 2 Banjo Bolts(M10x1), 4 Copper Washers, 2 Clips.
The Banjo End Has A Slight Degree Of Bend, See Photos.
15 1/4" Long (End To End).
3/8-24 Female Inlet For Inverted Flare (Most Common 3/16 Tube Nut) On One End And The 10Mm Banjo Head On The Other End.
Features
- This is not a vehicle specific item, please see the length and ends described in the bullet points to see if it fits your application
- 3/8-24 female inlet for inverted flare (most common 3/16 tube nut) on one end and the 10mm banjo head on the other end
- Includes: 2 hoses, 2 banjo bolts(M10x1), 4 copper washers, 2 clips
- 15 1/4 Long (end to end)
- The banjo end has a slight degree of bend, see photos
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #7
The Stop Shop SAE Brake Line Fitting Kit for Inverted Flares on 3/16 and 1/4 Tube
Asin: B015YGR412 | Model: FK13 | PartNumber: FK13
Many Local Parts Stores Rent Out Flaring Tools Free.
Most Populare Sae Sizes.
Features
- Coated for corrosion resistance
- Most populare SAE sizes
- Many local parts stores rent out flaring tools free
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #8
Full Car Brake Line Kit - Fits 69-74 Nova w/Power Disc Conversion - Stainless - The Stop Shop
Asin: B0B57GRVPX
Compatible For A 1969-74 Nova. Front Left And Front Right Brake Lines In This Kit Run To The Bracket Locations For A Factory Drum Brake Car. These Are The Brackets Where The Hard Line Meets The Flex Hose. If Your Car Is Factory Front Disc Brakes You Will Need To Relocate Those Brackets..
Included: Clip Set & Center Rear Brake Hose.
Made In The Usa From 304 Stainless Steel Tube With Plated Steel Fittings And Stainless Steel Spring Wrap Where Applicable.
For Front Power Disc Brakes And Rear Drum Brakes.
Features
- This line set is only compatible with the aftermarket valve shown in the photo. (Valve Not Included) This valve is the most common valve supplied with aftermarket disc conversions and booster assemplies
- For front POWER disc brakes and rear drum brakes
- Compatible for a 1969-74 Nova. Front left and front right brake lines in this kit run to the bracket locations for a factory drum brake car. These are the brackets where the hard line meets the flex hose. If your car is factory front disc brakes you will need to relocate those brackets.
- Made in the USA from 304 stainless steel tube with plated steel fittings and stainless steel spring wrap where applicable
- Included: Clip Set & Center Rear Brake Hose
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #9
The Stop Shop Universal Rear Rubber Brake Hose 14" Long with Mounting Block
Asin: B084T77GZQ
Comes With Fastening Clip.
Mounts To The Rear Of The Car.
14" Long, To Center Of Hole In Mounting Block.
Attached Mounting Block With 2 - 3/8-24 Ports For Rear Axle Brake Lines.
Features
- 7/16-24 female inlet for inverted flare
- Attached mounting block with 2 - 3/8-24 ports for rear axle brake lines
- Comes with fastening clip
- 14 Long, to center of hole in mounting block
- Mounts to the rear of the car
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #10
The Stop Shop Universal Braided Stainless Brake Hoses, 15 1/4 Inches Long with 10mm Banjo Hole and 3/8"-24 Female End, Made in USA
Asin: B08LZYNP4J
Banjo Hole Size Is For A 10Mm Banjo Bolt, The Female Inlet Is 3/8"-24 Inverted Flare.
These Hoses Are 15 1/4" Long Overall Length From End To End.
The Banjo Head Has A Slight Degree Of Bend, See Photos.
Does Not Include Hardware.
Features
- These are not vehicle specific, please check the bullet points for length of hose and banjo hole sizes
- Does not include hardware
- Banjo hole size is for a 10mm banjo bolt, The female inlet is 3/8-24 inverted flare
- The banjo head has a slight degree of bend, see photos
- These hoses are 15 1/4 long overall length from end to end
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #11
The Stop Shop Universal Rubber Brake Hose, 15 3/4" Long with 7/16" Banjo (Includes Clips)
Asin: B01N701WZH
Includes: 2 Hoses & 2 Clips.
3/8-24 Female Inlet For Inverted Flare (Most Common 3/16 Tube Nut).
15 1/4" Long From Inlet To Center Of Banjo Head.
Commonly Used On Classic Car Disc Brake Conversions.
Features
- These are not vehicle specific, please check the bullet points for the length and banjo sizes
- Commonly used on Classic Car disc brake conversions
- Includes: 2 hoses & 2 clips
- 15 1/4 long from inlet to center of banjo head
- 3/8-24 female inlet for inverted flare (most common 3/16 tube nut)
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #12
The Stop Shop Universal Braided Stainless Brake Hose, 16 Inches Long with 7/16 Inch Banjo Hole (Includes hardware) Made in USA
Asin: B01MTY8XX5
Includes: 2 Hoses, 2 Banjo Bolts(7/16-20), 4 Copper Washers, 2 Clips.
3/8-24 Female Inlet For Inverted Flare (Most Common 3/16 Tube Nut).
16" Long End To End.
Commonly Used In Disc Brake Conversions.
Features
- These are not vehicle specific, please check the bullet points for lengths and banjo sizes
- Commonly used in disc brake conversions
- Includes: 2 hoses, 2 banjo bolts(7/16-20), 4 copper washers, 2 clips
- 16 Long end to end
- 3/8-24 female inlet for inverted flare (most common 3/16 tube nut)
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
Dimensions: 0.10 x 16.00 x 0.43 inches
See On Amazon #13
Front Brake Line Kit - Fits 67-69 Camaro/Firebird - Stainless - The Stop Shop
Asin: B0947J1R6W
Made In The Usa From 304 Stainless Steel Tube With Plated Steel Fittings And Stainless Steel Spring Wrap Where Applicable.
For The Front End Only, 4 Pieces Included.
This Line Set Will Have All The Correct Bends And Fittings To Fit This Vehicle And Valve Combination.
Compatible For 1967, 1968 & 1969 Camaro. Front Left And Front Right Brake Lines In This Kit Run To The Bracket Locations For A Factory Drum Brake Car. These Are The Brackets Where The Hard Line Meets The Flex Hose. If Your Car Is Factory Front Disc Brakes You Will Need To Relocate Those Brackets..
Features
- This line set is only compatible with the aftermarket valve shown in the photo. (Valve Not Included) This valve is the most common valve supplied with aftermarket disc conversions and booster assemplies
- Compatible for 1967, 1968 & 1969 Camaro. Front left and front right brake lines in this kit run to the bracket locations for a factory drum brake car. These are the brackets where the hard line meets the flex hose. If your car is factory front disc brakes you will need to relocate those brackets.
- Made in the USA from 304 stainless steel tube with plated steel fittings and stainless steel spring wrap where applicable
- This line set will have all the correct bends and fittings to fit this vehicle and valve combination
- For the front end only, 4 pieces included
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #14
The Stop Shop 30R7 Fuel Hose 1/2 Inch I.D. 10 Feet
Asin: B06Y2KVF7M
Temperature Range: -40°F To +257°F, -40°C To +125°C.
Made In Usa!.
Fuel Line, Vapor Emission & Crankcase Ventilation Hose.
Not For Fuel Injection. A Multipurpose Fuel Hose That Can Be Used As A Fuel Line, Pcv Connection, Emission Control Line Or Fuel Return Line..
Features
- Provides a Constant Working Pressure to 50 psi Regardless of I.D.
- NOT for Fuel Injection. A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.
- Temperature range: -40 F to +257 F, -40 C to +125 C
- Fuel Line, Vapor Emission & Crankcase Ventilation hose
- Made in USA!
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #15
The Stop Shop Universal Rubber Brake Hose, 20 inches Long with 10mm Banjo (Includes Clips)
Asin: B07Y429X4S
10Mm Banjo Head.
Rubber Brake Hose.
Clips Included (Two).
20 Inches Long.
Features
- These are not vehicle specific, please check the bullet points for length and banjo sizes to see if they are correct for your application
- 20 Inches long
- 10mm banjo head
- Clips included (Two)
- Rubber Brake Hose
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #16
Full Car Brake Line Kit - Fits 69 Camaro w/Disc Conversion - Stainless - The Stop Shop
Asin: B0949HL4WF
Compatible For A 1969 Camaro. Front Left And Front Right Brake Lines In This Kit Run To The Bracket Locations For A Factory Drum Brake Car. These Are The Brackets Where The Hard Line Meets The Flex Hose. If Your Car Is Factory Front Disc Brakes You Will Need To Relocate Those Brackets..
Included: Clip Set & Center Rear Brake Hose.
Made In The Usa From 304 Stainless Steel Tube With Plated Steel Fittings And Stainless Steel Spring Wrap Where Applicable.
For Front Power Disc Brakes And Rear Drum Brakes.
Features
- This line set is only compatible with the aftermarket valve shown in the photo. (Valve Not Included) This valve is the most common valve supplied with aftermarket disc conversions and booster assemplies
- For front POWER disc brakes and rear drum brakes
- Compatible for a 1969 Camaro. Front left and front right brake lines in this kit run to the bracket locations for a factory drum brake car. These are the brackets where the hard line meets the flex hose. If your car is factory front disc brakes you will need to relocate those brackets.
- Made in the USA from 304 stainless steel tube with plated steel fittings and stainless steel spring wrap where applicable
- Included: Clip Set & Center Rear Brake Hose
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon #17
1967-1981 Vent Duct Pipe, Pre-Heat Aluminum Flex, Air Cleaner to Manifold, 2 Inch Diameter
Asin: B01MY4FH60 | Model: TSS125 | PartNumber: TSS125
Manufactured To The Highest Quality Standards.
Features
- New correct pre heat flexible duct pipe for your muscle car. Exact fit for all 67 - 81 models with the two inch diameter. This pipe goes from the carburetor air cleaner assembly base down to your exhaust manifold. Correct aluminum, shape, and design. Size is 2 inches in diameter and stretches to about 18 inches if needed. Helps your carb warm up for proper operation.
- Manufactured to the highest quality standards
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: TheStopShop
See On Amazon #18
The Stop Shop 25 Ft. of 1/4" Copper Nickel Tubing with Fittings
Asin: B0786N8YLK
Easy To Bend And Flare Tube.
Tubing Will Never Rust!!.
Features
- 16 fittings included: 12 are 7/16"-24, 2 are 1/2"20, and 2 are 9/16"-18
- Tubing will never rust!!
- Easy to Bend and Flare Tube
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
Dimensions: 0.04 x 300.00 x 0.25 inches
See On Amazon #19
Full Car Brake Line Kit - Fits 68 Camaro w/Rear Disc Conversion - Stainless - The Stop Shop
Asin: B0949M63QY
Compatible For A 1968 Camaro. Front Left And Front Right Brake Lines In This Kit Run To The Bracket Locations For A Factory Drum Brake Car. These Are The Brackets Where The Hard Line Meets The Flex Hose. If Your Car Is Factory Front Disc Brakes You Will Need To Relocate Those Brackets..
Included: Clip Set & Center Rear Brake Hose.
Made In The Usa From 304 Stainless Steel Tube With Plated Steel Fittings And Stainless Steel Spring Wrap Where Applicable.
For Front Power Disc Brakes And Rear Disc Brakes.
Features
- This line set is only compatible with the aftermarket valve shown in the photo. (Valve Not Included) This valve is the most common valve supplied with aftermarket disc conversions and booster assemplies
- For front POWER disc brakes AND rear disc brakes
- Compatible for a 1968 Camaro. Front left and front right brake lines in this kit run to the bracket locations for a factory drum brake car. These are the brackets where the hard line meets the flex hose. If your car is factory front disc brakes you will need to relocate those brackets.
- Made in the USA from 304 stainless steel tube with plated steel fittings and stainless steel spring wrap where applicable
- Included: Clip Set & Center Rear Brake Hose
- See more on Amazon...
Brand: The Stop Shop | Manufacturer: The Stop Shop
See On Amazon
Looking For Something Else?
Search