Keyes K853518 Photosensitive Sensor for Arduino (Pack of 2)
Asin: B01N28Q99L | Model: K853518 | PartNumber: K853518
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Package Quantity: 1.
Country Of Origin: China.
Product Type: Electronic Component.
Features
- Package Dimensions: 2.5 cms (L) x 8.9 cms (W) x 10.2 cms (H)
- Product Type: Electronic Component
- Package Quantity: 1
- Country Of Origin: China
- See more on Amazon...
Brand: Keyes | Manufacturer: Keyes
See On Amazon Similar To Keyes K853518 Photosensitive Sensor for
#1
Teyleten Robot 5MM LDR Photosensitive Sensor Module Light Dependent Resistor Sensor Module Digital Light Detection LM393 3 pins for Arduino (10PCS)
Asin: B099N5W9F7 | Model: C40- | PartNumber: C40- | Ean: 9339272399347
The Do Output Can Be Directly Connected To Microcontroller, Through Single Chip Microcomputer To Detect The High And Low Level, Thus To Detect The Environment Light Intensity Change;.
The Do Output Can Be Directly Driven Our Relay Module, Which Can Form A Light-Operated Switch..
Module In The Environment Light Intensity Than Set Threshold, Output High Level Do End, When The Environment Light Intensity More Than Set Threshold, The Do Output Low Level;.
Features
- photosensitive resistance module's most sensitive to ambient light, commonly used to detect environment around the brightness of the light, or MCU trigger relay module, etc.;
- module in the environment light intensity than set threshold, output high level DO end, when the environment light intensity more than set threshold, the DO output low level;
- the DO output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change;
- the DO output can be directly driven our relay module, which can form a light-operated switch.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.20 x 1.26 x 0.55 inches
See On Amazon #2
uxcell Photosensitive Sensor Module Digital Light Intensity Detection 4pins DC 3.3-5V for UNO 5pcs
Asin: B07V3QJ8G2 | Model: a19052200ux0094 | PartNumber: a19052200ux0094
3.With Power Indicator (Red) And Relay Pull-In Indicator (Blue), And Four M3 Screw Mounting Holes For Easy Installation.
5.Digital Outputs D0 Can Be Directly Connected With The Microcontroller Through The Microcontroller To Detect High And Low , Thereby Detecting The Light Intensity Changes In The Environment;.
4.When Ambient Light Intensity Does Not Reach The Threshold Value, The Module Do Port Output High; When The Ambient Light Intensity Exceeds A Set Threshold, The D0 Output Low;.
2.Generally Used To Detect Surrounding Environment Of The Brightness Of The Light..
Features
- 1. Supply voltage: DC 3.3-5V ; Output : Digital signal 0&1
- 2.Generally used to detect surrounding environment of the brightness of the light.
- 3.With power indicator (red) and relay pull-in indicator (blue), and four M3 screw mounting holes for easy installation
- 4.When ambient light intensity does not reach the threshold value, the module DO port output high; when the ambient light intensity exceeds a set threshold, the D0 output low;
- 5.Digital outputs D0 can be directly connected with the microcontroller through the microcontroller to detect high and low , thereby detecting the light intensity changes in the environment;
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
UMLIFE 20PCS 5MM LDR Photosensitive Sensor Module Light Dependent Resistor Sensor Module Digital Light Detection LM393 3 pins for Arduino
Asin: B09NCXKW9B | Ean: 0701715484177 | UPC: 701715484177
✹✹Super Material: It Is Made Of Electronic Accessories Element, Inner Conductor Is Pure Copper. It Is Long Lasting And Durable For You To Use. With Adjustable Potentiometer Can Adjust The Brightness Of The Light Detected.
✹✹ You Can Get 20Pcs Photosensitive Sensor Module Digital Light Intensity Detection Photosensitive Resistor Module High Power High Efficiency Digital Measurement Electronic Practice Diy.
✹✹Photosensitive Resistance Module's Most Sensitive To Ambient Light, Commonly Used To Detect Environment Around The Brightness Of The Light, Or Mcu Trigger Relay Module, Etc.;.
✹✹Working Voltage 3.3V-5V, The Output Format: Digital Switching Output (0 And 1).
Features
- With bolt holes for easy installation, a small board PCB size: 3.2cm x 1.4cm, using a wide voltage LM393 comparator
- Working voltage 3.3V-5V, the output format: Digital switching output (0 and 1)
- Super material: It is made of electronic accessories element, inner conductor is pure copper. it is long lasting and durable for you to use. With adjustable potentiometer can adjust the brightness of the light detected
- photosensitive resistance module's most sensitive to ambient light, commonly used to detect environment around the brightness of the light, or MCU trigger relay module, etc.;
- you can get 20PCS Photosensitive Sensor Module Digital Light Intensity Detection Photosensitive Resistor Module High Power High Efficiency Digital Measurement Electronic Practice DIY
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
See On Amazon #4
InduSKY 2pcs 8mm Inductive Proximity Sensor Detecting Distance Approach Sensor Cylinder Proximity Switch NPN NO DC 6-36V 300mA 3-Wire (Diameter 18mm)
Asin: B0872Y3C7D | Model: IDSFZ02 | PartNumber: IDSFZ02 | Ean: 0742773201986 | UPC: 742773201986
【Strong Anti-Interference】:Tvs Tube Protection, Strong Anti-Interference Ability. Non-Contact Output, And Long Service Life..
【Application】: It Is A Component Widely Used In Automatic Control Industry For Detecting, Controlling, And Contactless Switching. It Is Widely Used In Mechanical Automation, 3D Printing Limit Positioning, Paper Making, Light Industry For Limiting Station, Orientation Taking Count, Speeding Trial Etc..
【Theory】: Output Type: Npn No(Normal Open); Diameter Of Head : 18Mm;Detecting Distance: 8Mm; Supply Voltage: Dc 6-36V; Current Output : 200-300Ma; Detect Object : Metal..
【Sensitive Detection】: Abs Material Detection Surface, The Built-In Intelligent Sensing Chip Of The Proximity Switch Can Sensitively Detect Objects, When Proximity Switch Is Close To Single Target Object, It Will Send Control Signal..
Features
- High Quality : Brass nickel-plated shell, not easy to rust and fade. With 115CM high-quality copper wire, strong and durable, and excellent electrical conductivity.
- Sensitive Detection : ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
- Strong anti-interference TVS tube protection, strong anti-interference ability. Non-contact output, and long service life.
- Theory : Output Type: NPN NO(Normal Open); Diameter of Head : 18mm;Detecting Distance: 8mm; Supply Voltage: DC 6-36V; Current Output : 200-300mA; Detect Object : Metal.
- Application : It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D printing limit positioning, paper making, light industry for limiting station, orientation taking count, speeding trial etc.
- See more on Amazon...
Brand: InduSKY | Manufacturer: InduSKY
Weight: 0.37 Pounds
See On Amazon #5
Taiss LJC18A3-H-Z/BX Proximity Switch 1-10mm Sensor Switch Capacitance Proximity Sensor Switch NPN NO Normally Open DC 6-36V 300mA M18 3-Wire
Asin: B0746FYF5S | Model: LJC18A3-H-Z/BX | PartNumber: LJC18A3-H-Z/BX | Ean: 0755082871689 | UPC: 755082871689
Operating Temperature : -25 To +65 Celsius (Non-Freezing Condition);Size : 7.5 X 3Cm / 3"X 1.2"(L*Max. Dia);Cable Length : 120Cm/47";External Material : Plastic, Alloy.
Net Weight : 85G;Color : Silver Tone, Blue, Gray; Package Content : 1 X Capacitive Proximity Switch.
Detecting Object : Metal Or Nonmetal Material; Supply Voltage : Dc 6-36V;Current Output : 300Ma;Response Frequency : 100Hz.
Product Name : Capacitive Proximity Switch; Model : Ljc18a3-H-Z/Bx;Wire Type : Dc 3 Wire Type (Brown, Black, Blue);Theory : Capacitance Sensor; Output Type : Npn No(Normal Open);Diameter Of Head : 16Mm; Thread Diameter:18Mm; Detecting Distance : 1-10Mm.
Features
- Special attention: After the switch is installed, the sensing distance needs to be adjusted, otherwise, there will be no response when the switch is turned on.There are two friends recently. The reaction product does not work, First note: our products are 100 % tested before they leave the factory. Solution: 1. Turn Switch control sensing distance behind the product; 2 .Send us an email and we will send you a new one.
- Product Name : Capacitive Proximity Switch; Model : LJC18A3-H-Z/BX;Wire Type : DC 3 Wire Type (Brown, Black, Blue);Theory : Capacitance Sensor; Output Type : NPN NO(Normal Open);Diameter of Head : 16mm; Thread Diameter:18mm; Detecting Distance : 1-10mm
- Operating Temperature : -25 to +65 Celsius (Non-freezing Condition);Size : 7.5 x 3cm / 3x 1.2(L*Max. Dia);Cable Length : 120cm/47;External Material : Plastic, Alloy
- Detecting Object : Metal or Nonmetal Material; Supply Voltage : DC 6-36V;Current Output : 300mA;Response Frequency : 100Hz
- Net Weight : 85g;Color : Silver Tone, blue, Gray; Package Content : 1 x Capacitive Proximity Switch
- See more on Amazon...
Brand: Taiss | Manufacturer: Taiss
See On Amazon #6
Taiss/ 2Pcs M18 Proximity Sensor NPN NO Normally Open 6-36VDC 8mm Detective Approach Sensor Inductive Proximity Switch LJ18A3-8-Z/BX
Asin: B073XDRSK4 | Ean: 0726146000147 | UPC: 726146000147
Supply Voltage : Dc 6-36V;Current Output : 300Ma;Detect Object : Iron.
External Material : Plastic, Alloy;Net Weight : 160G;Package Content : 2 X Inductive Proximity Switch.
Operating Temperature : -25C To +55C (Non-Freezing Condition);Size : 7 X 3Cm/2.8'' X 1.2'' (L*Max. Dia);Cable Length : 103Cm / 40.55".
Theory : Inductive Sensor;Output Type: Npn No(Normal Open);Thread Diameter: 18Mm : 18Mm;Detecting Distance : 8Mm.
Features
- Product Name : Inductive Proximity Switch;Model : LJ18A3-8-Z/BX;Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type
- Theory : Inductive Sensor;Output Type: NPN NO(Normal Open);Thread diameter: 18mm : 18mm;Detecting Distance : 8mm
- Supply Voltage : DC 6-36V;Current Output : 300mA;Detect Object : Iron
- Operating Temperature : -25C to +55C (Non-freezing Condition);Size : 7 x 3cm/2.8'' x 1.2'' (L*Max. Dia);Cable Length : 103cm / 40.55
- External Material : Plastic, Alloy;Net Weight : 160g;Package Content : 2 x Inductive Proximity Switch
- See more on Amazon...
Brand: Taiss | Manufacturer: Taiss
See On Amazon #7
Gowoops 10 PCS of Digital Light Intensity Detection Photosensitive Sensor Module
Asin: B01N1FKS4L | Model: ZZ20161810 | PartNumber: ZZ20161810 | Ean: 0705586405439 | UPC: 705586405439
3. With Adjustable Potentiometer Can Adjust The Brightness Of The Light Detected.
5. With Bolt Holes For Easy Installation, A Small Board Pcb Size: 3.2Cm X 1.4Cm, Using A Wide Voltage Lm393 Comparator.
4. Working Voltage 3.3V-5V, The Output Format: Digital Switching Output (0 And 1).
2. The Comparator Output Signal Clean Waveform Is Good, Driving Ability, Than 15Ma..
Features
- 1. Using the sensitive type photosensitive resistance sensor
- 2. The comparator output signal clean waveform is good, driving ability, than 15mA.
- 3. With adjustable potentiometer can adjust the brightness of the light detected
- 4. Working voltage 3.3V-5V, the output format: Digital switching output (0 and 1)
- 5. With bolt holes for easy installation, a small board PCB size: 3.2cm x 1.4cm, using a wide voltage LM393 comparator
- See more on Amazon...
Brand: Gowoops | Manufacturer: Gowoops
See On Amazon #8
Songhe 5MM LDR Sensor Module Light Resistor Sensor Module Light Detection LM393 3 pins for Arduino (10PCS)
Asin: B07XFZ99XL | Model: oilkk-035 | PartNumber: oilkk-035 | Ean: 0724545020551 | UPC: 724545020551
Brand: Songhe | Manufacturer: Songhe
Dimensions: 0.20 x 1.26 x 0.55 inches
See On Amazon #9
Taiss 1pcs M8 LJ8A3-2-Z/BX Inductive Proximity Sensor Detection Switch NPN NO Normally Open DC6-36V Approach Sensor 2mm Proximity Switch
Asin: B073XCS6SL | Model: 43237-2 | PartNumber: 43237-2 | Ean: 0726146000154 | UPC: 726146000154
Supply Voltage : Dc 6-36V;Current Output : 300Ma;Response Frequency : 150Hz;Detect Object : Iron.
Net Weight : 50G;Color : Blue Black Package Content : 1 X Inductive Proximity Switch.
Operating Temperature : -25°C To +55°C (Non-Freezing Condition);Size : 5 X 1.5Cm / 1.97'' X 0.6'' (L*Max. Dia);Cable Length : 1.2M / 47.2";External Material : Plastic, Alloy.
Theory : Inductive Sensor;Output Type : Npn No(Normal Open);Thread Diameter : 8Mm;Detecting Distance : 2Mm.
Features
- Product Name : Inductive Proximity Switch;Model : LJ8A3-2-Z/BX;Wire Type :3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type
- Theory : Inductive Sensor;Output Type : NPN NO(Normal Open);Thread Diameter : 8mm;Detecting Distance : 2mm
- Supply Voltage : DC 6-36V;Current Output : 300mA;Response Frequency : 150Hz;Detect Object : Iron
- Operating Temperature : -25 C to +55 C (Non-freezing Condition);Size : 5 x 1.5cm / 1.97'' x 0.6'' (L*Max. Dia);Cable Length : 1.2m / 47.2;External Material : Plastic, Alloy
- Net Weight : 50g;Color : Blue Black Package Content : 1 x Inductive Proximity Switch
- See more on Amazon...
Brand: Taiss | Manufacturer: Taiss
See On Amazon #10
E3Z-D61 NPN 5-10cm Photoelectric Sensor
Asin: B09G78XHKJ | Ean: 3681156518181
Brand: IndustrialMaker | Manufacturer: IndustrialMaker
See On Amazon #11
uxcell Photosensitive Sensor Module Digital Light Intensity Detection 4pins DC 3.3-5V for UNO
Asin: B07V5T8HKR | Model: a19052200ux0092 | PartNumber: a19052200ux0092
3.With Power Indicator (Red) And Relay Pull-In Indicator (Blue), And Four M3 Screw Mounting Holes For Easy Installation.
5.Digital Outputs D0 Can Be Directly Connected With The Microcontroller Through The Microcontroller To Detect High And Low , Thereby Detecting The Light Intensity Changes In The Environment;.
4.When Ambient Light Intensity Does Not Reach The Threshold Value, The Module Do Port Output High; When The Ambient Light Intensity Exceeds A Set Threshold, The D0 Output Low;.
2.Generally Used To Detect Surrounding Environment Of The Brightness Of The Light..
Features
- 1. Supply voltage: DC 3.3-5V ; Output : Digital signal 0&1
- 2.Generally used to detect surrounding environment of the brightness of the light.
- 3.With power indicator (red) and relay pull-in indicator (blue), and four M3 screw mounting holes for easy installation
- 4.When ambient light intensity does not reach the threshold value, the module DO port output high; when the ambient light intensity exceeds a set threshold, the D0 output low;
- 5.Digital outputs D0 can be directly connected with the microcontroller through the microcontroller to detect high and low , thereby detecting the light intensity changes in the environment;
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
JIUWU Light Detection Digital Switch Mete Output Photosensitive Sensor Module Pack of 5
Asin: B00NLA4D4U | Model: IC238 | PartNumber: IC238 | Ean: 0701304986877 | UPC: 701304986877
Accurate Detection: The Photoelectric Sensors Module Uses Advanced Sensing Technology To Ensure Precise And Reliable Detection Of Light..
Durable And Efficient: Crafted With Quality Materials And Designed To Be Long-Lasting, The Jiuwu Photoelectric Sensors Module Offers Reliable Performance And Efficient Power Consumption..
Enhanced Functionality: This Module Not Only Detects Light But Also Works As A Digital Switch..
Versatile And Reliable: The Jiuwu Photoelectric Sensors Module Offers A Wide Range Of Applications, From Light Detection To Optical Endstop Functionality..
Features
- working voltage: 3.3V-5V: VCC for positive power supply 3.3-5V GND for power supply is negative DO TTL switching signal output.
- Versatile and Reliable: The JIUWU Photoelectric Sensors module offers a wide range of applications, from light detection to optical endstop functionality.
- Accurate Detection: The Photoelectric Sensors module uses advanced sensing technology to ensure precise and reliable detection of light.
- Enhanced Functionality: This module not only detects light but also works as a digital switch.
- Durable and Efficient: Crafted with quality materials and designed to be long-lasting, the JIUWU Photoelectric Sensors module offers reliable performance and efficient power consumption.
- See more on Amazon...
Brand: JIUWU | Manufacturer: JiuWu
Dimensions: 1.00 x 3.70 x 3.00 inches | Weight: 0.02 pounds
See On Amazon #13
BALITENSEN LJ18A3-8-Z/BX 8mm Approach Sensor Inductive Proximity NPN NO Switch DC 6-36V
Asin: B078SF8SJ8 | Ean: 0797566265515 | UPC: 797566265515
Theory : Inductive Sensor;Output Type : Npn No(Normal Open);Thread Diameter : 11.8Mm/0.46";Head Diameter : 10.4Mm/0.41".
External Material : Plastic, Alloy;Net Weight : 44G;Color : Silver Tone, Yellow, Gray;Package Content : 1 X Inductive Proximity Switch.
Detect Object : Iron;Operating Temperature : -25C To +55C (Non-Freezing Condition);Size : 6.2 X 2Cm/2.4'' X 0.8'' (L*Max. Dia);Cable Length : 110Cm/43.3".
Detecting Distance : 4Mm(+/-10%);Supply Voltage : Dc 6-36V;Current Output : 300Ma;Response Frequency : 150Hz.
Features
- Product Name : Inductive Proximity Switch;Model : LJ12A3-4-Z-BX;Wire Type : 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type
- Detecting Distance : 4mm(+/-10%);Supply Voltage : DC 6-36V;Current Output : 300mA;Response Frequency : 150Hz
- Theory : Inductive Sensor;Output Type : NPN NO(Normal Open);Thread Diameter : 11.8mm/0.46;Head Diameter : 10.4mm/0.41
- Detect Object : Iron;Operating Temperature : -25C to +55C (Non-freezing Condition);Size : 6.2 x 2cm/2.4'' x 0.8'' (L*Max. Dia);Cable Length : 110cm/43.3
- External Material : Plastic, Alloy;Net Weight : 44g;Color : Silver Tone, Yellow, Gray;Package Content : 1 x Inductive Proximity Switch
- See more on Amazon...
Brand: BALITENSEN | Manufacturer: BALITENSEN
See On Amazon #14
uxcell Photosensitive Sensor Module Digital Light Intensity Detection DC 3.3-5V for Arduino UNO
Asin: B07V6TS8V1
3.With Power Indicator (Red) And Relay Pull-In Indicator (Blue), And Four M3 Screw Mounting Holes For Easy Installation.
5.Digital Outputs D0 Can Be Directly Connected With The Microcontroller Through The Microcontroller To Detect High And Low , Thereby Detecting The Light Intensity Changes In The Environment;.
4.When Ambient Light Intensity Does Not Reach The Threshold Value, The Module Do Port Output High; When The Ambient Light Intensity Exceeds A Set Threshold, The D0 Output Low;.
2.Generally Used To Detect Surrounding Environment Of The Brightness Of The Light..
Features
- 1. Supply voltage: DC 3.3-5V ; Output : Digital signal 0&1
- 2.Generally used to detect surrounding environment of the brightness of the light.
- 3.With power indicator (red) and relay pull-in indicator (blue), and four M3 screw mounting holes for easy installation
- 4.When ambient light intensity does not reach the threshold value, the module DO port output high; when the ambient light intensity exceeds a set threshold, the D0 output low;
- 5.Digital outputs D0 can be directly connected with the microcontroller through the microcontroller to detect high and low , thereby detecting the light intensity changes in the environment;
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
JKKUDAS Cylinder Type M18 NPN NO DC6-36V Three-Wire Proximity Sensor Switch Non-Flush Type
Asin: B0D1DSRQPY | Model: JKKUDAS | PartNumber: JKKUDAS | Ean: 9157855046163
Brand: JKKUDAS | Manufacturer: JKKUDAS
Weight: 0.44 pounds
See On Amazon #16
M18 Connector Proximity Switch TRC18-8DC Sensor for Proton Automatic Door Sensor
Asin: B0CWD1DQMD | Model: TAITANGEL | PartNumber: TAITANGEL | Ean: 9485562700192
M18 Connector Proximity Switch Trc18-8Dc Sensor For Proton Automatic Door Sensor.
Features
- Pushbutton Switches
- M18 connector proximity switch TRC18-8DC Sensor for proton Automatic door sensor
- See more on Amazon...
Brand: TAITANGEL | Manufacturer: TAITANGEL
Weight: 0.11 pounds
See On Amazon #17
AYLIORUY 5-Piece Set of photosensitive Sensor Module, Photo Related Resistor, 3-axis Sensor Module, Digital Light Detection
Asin: B0CMX11LQ6 | Ean: 0753715169776 | UPC: 753715169776
Lis3dsh Is Very Suitable For Mobile Device Applications. It Can Be Used For Tilt Sensing Applications, While Measuring Static Gravity Acceleration, As Well As Measuring Vibration Velocity Caused By Dynamic Additional Motion. With Its High Resolution (4Mg/Lsb), It Can Measure Changes In Inclination Angle Of Approximately 0.25 °..
Communication Method: Iic/Spi Communication Protocol.
With High-Resolution (13 Bit) Measurement, Up To ± 16G. The Digital Output Data Adopts A 16 Bit Binary Complement Format, Which Can Be Accessed Through The I2c Digital Interface Spi (3-Wire Or 4-Wire).
According To The 16 Bit Two Complement Format, It Can Be Accessed Through The Digital Interface Spi (3-Wire Or 4-Wire) Or I2c.
Features
- New original LIS3DSH chip with quality assurance
- According to the 16 bit two complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C
- LIS3DSH is very suitable for mobile device applications. It can be used for tilt sensing applications, while measuring static gravity acceleration, as well as measuring vibration velocity caused by dynamic additional motion. With its high resolution (4mg/LSB), it can measure changes in inclination angle of approximately 0.25 .
- With high-resolution (13 bit) measurement, up to 16g. The digital output data adopts a 16 bit binary complement format, which can be accessed through the I2C digital interface SPI (3-wire or 4-wire)
- Communication method: IIC/SPI communication protocol
- See more on Amazon...
Brand: AYLIORUY | Manufacturer: AYLIORUY
See On Amazon #18
Keyence PZ-M53 Photoelectric Sensor
Asin: B018JTUGC0
Brand: Keyence | Manufacturer: Keyence
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search