Gas Air Compressor Unloader Check Valve Combo 145-175 PSI 3/4" Inlet & Outlet
Asin: B01N37U7EN | Model: NG-40-M-145-175 | PartNumber: NG-40-M-145-175 | Ean: 0724453990274 | UPC: 724453990274
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Is A Combination Valve That Includes A Pilot Valve, Pressure Discharge Valve, And A Check Valve All In One Piece..
-Factory Set At 145 Psi Cut In & 175 Psi Cut Out Pressure -Pressure Can Be Adjusted 30-40 Psi Up Or Down.
-3/4" Npt Male Pipe Thread Outlet To Tank -3/4" Compression Thread Inlet For 3/4" Copper Tubing -1/8" Npt Female Pipe Thread Port For Throttle Control.
His Valve Features A 3/4" Compression Inlet X 3/4" Npt Male Thread Outlet..
Features
- Brand new continuous run air compressor piloted discharge check valve.
- his valve features a 3/4 Compression inlet x 3/4 NPT Male thread outlet.
- This is a combination valve that includes a pilot valve, pressure discharge valve, and a check valve all in one piece.
- -3/4 NPT Male Pipe Thread Outlet To Tank -3/4 Compression Thread Inlet For 3/4 Copper Tubing -1/8 NPT Female Pipe Thread Port For Throttle Control
- -Factory Set At 145 Psi Cut In & 175 Psi Cut Out Pressure -Pressure Can Be Adjusted 30-40 Psi Up or Down
- See more on Amazon...
Brand: Ei | Manufacturer: Conrador
See On Amazon Similar To Gas Air Compressor Unloader Check
#1
Control Devices P2525-1WA Brass Ball Check Valve, 1/4" NPT Female x NPT Male
Asin: B007GDXA60 | Model: P2525-1WA | PartNumber: P2525-1WA | Ean: 0763463317770 | UPC: 763463317770
Fluorocarbon O-Rings For Higher Temperature And Chemical Resistance.
Maximum Pressure Rating Of 250 Psi And Maximum Working Temperature Of 250 Degrees Fahrenheit.
Female And Male Npt Threads For Connecting Pipes With Different Ends.
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Can be used as a tank check valve for small compressors or as a component in pneumatic circuits
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Fluorocarbon O-rings for higher temperature and chemical resistance
- Female and male NPT threads for connecting pipes with different ends
- Maximum pressure rating of 250 psi and maximum working temperature of 250 degrees Fahrenheit
- See more on Amazon...
Brand: Control Devices | Manufacturer: Control Devices
See On Amazon #2
Hromee Air Compressor Replacement Components Brass 1/2 Inch MNPT Compressor in Tank Check Valve Kit with Three Different Unloader Tube Fittings 20 SCFM 4 Pieces
Asin: B07MHGPT63 | Model: HR4011 | PartNumber: HR4011
Construction - One Piece Brass Body Stainless Steel Springs Glass Filled Fluoropolymer Poppets For Positive Sealing And Long Term Reliability. It Can Be Disassembled For Cleaning And Repairing. Maximum Pressure Of 450 Psi And Air Flow Of 20 Scfm..
Compatiable - Hromee Check Valve Kit Is Used To Replace The Check Valve On Some Brands Of Air Compressor. Consult Your Owner’S Manual To Find If This Check Valve Fits Your Air Compressor. We Offer 30-Day Return With No Reason..
Connection Size - 1/2" Mnpt Tank Check Valves Are Used To Keep Air Volume And Pressure From Escaping Back Into Compressor Heads While Not Operating. The 1/8" Fnpt Side Port Is Designed For Pressure Switch Application..
Two Fittings - The Valves Check Valves Are All Brass And It Comes With 2 Different Unloader Fittings, Barbed And Push To Fit For The 1/4” Nylon Unloader Tubing..
Features
- FUNCTION - The Hromee check valve kit is used to prevent backflow in a piping system is known as a check valve. The pressure of the fluid passing through a pipeline opens the valve, while any reversal of flow will close the valve. It allows full unobstructed flow and automatically shuts as pressure decreases.
- TWO FITTINGS - The valves check valves are all brass and It comes with 2 different unloader fittings, barbed and push to fit for the 1/4 nylon unloader tubing.
- CONSTRUCTION - One piece brass body stainless steel springs glass filled fluoropolymer poppets for positive sealing and long term reliability. It can be disassembled for cleaning and repairing. Maximum pressure of 450 PSI and air flow of 20 SCFM.
- CONNECTION SIZE - 1/2 MNPT tank check valves are used to keep air volume and pressure from escaping back into compressor heads while not operating. The 1/8 FNPT side port is designed for pressure switch application.
- COMPATIABLE - Hromee check valve kit is used to replace the check valve on some brands of air compressor. Consult your owner s manual to find if this check valve fits your air compressor. We offer 30-day return with no reason.
- See more on Amazon...
Brand: Hromee | Manufacturer: Hromee
Dimensions: 1.00 x 4.00 x 4.60 inches | Weight: 0.29 pounds
See On Amazon #3
Control Devices-M2525-1WA Brass Ball Check Valve, 1/4" NPT Male
Asin: B007GDX93E | Model: M2525-1WA | PartNumber: M2525-1WA | Ean: 0763463317800 | UPC: 763463317800
Fluorocarbon O-Rings For Higher Temperature And Chemical Resistance.
Maximum Pressure Rating Of 250 Psi And Maximum Working Temperature Of 250 Degrees Fahrenheit.
Female And Male Npt Threads For Connecting Pipes With Different Ends.
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Can be used as a tank check valve for small compressors or as a component in pneumatic circuits
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Fluorocarbon O-rings for higher temperature and chemical resistance
- Female and male NPT threads for connecting pipes with different ends
- Maximum pressure rating of 250 psi and maximum working temperature of 250 degrees Fahrenheit
- See more on Amazon...
Brand: Control Devices | Manufacturer: Control Devices
Weight: 0.09 pounds
See On Amazon #4
Control Devices-P5050-1EP Brass In-Tank Check Valve, 1/2" NPT Female x NPT Male
Asin: B007GDXCIG | Model: P5050-1EP | PartNumber: P5050-1EP
Made From Brass For Higher Corrosion Resistance Than Steel; Ptfe Poppet And Stainless Steel Spring.
Maximum Pressure Rating Of 450 Psi; Maximum Working Temperature Of 400 Degrees Fahrenheit.
Compression Connection On One End And Female Npt Threads On The Other For Connecting To Male Threaded Pipe.
Installs In The Discharge Line Of The Compressor In Cases Where An In-Tank Valve Will Not Fit.
Features
- Poppet-type in-line check valve
- Installs in the discharge line of the compressor in cases where an in-tank valve will not fit
- Made from brass for higher corrosion resistance than steel; PTFE poppet and stainless steel spring
- Compression connection on one end and female NPT threads on the other for connecting to male threaded pipe
- Maximum pressure rating of 450 psi; maximum working temperature of 400 degrees Fahrenheit
- See more on Amazon...
Brand: Control Devices | Manufacturer: Control Devices
See On Amazon #5
Throttle Control for Honda gas engine compressor 5.5-6.5 HP TCSP-H-5565
Asin: B00UEVCBN4 | Model: TCSP-H-5565-B CONRADER | PartNumber: TCSP-H-5565-B CONRADER | Ean: 0795525333282 | UPC: 795525333282
Brand: conrader | Manufacturer: Conrader
See On Amazon #6
Chiloskit 3-Port Brass Male Threaded Air Compressor Check Valve Central Pneumatic Air Compressor Attachments Accessories, G1/8x G3/8x G1/2
Asin: B07D594WCM | Ean: 0673169250199 | UPC: 673169250199
The Three Male Thread Connectors Are Respectively For Tube Connecting, Air Tank And Compressor Piston Pump..
If You Have Any Questions About Our Products, Please Contact Us Promptly..
Male Thread Size: G1/8, G3/8, G1/2 . Please Check The Size Before You Buy It Dear Friend !.
Good Performance: Air Compressor Check Valve Has Compressive Strength, Corrosion Resistance, High Performance And High Reliability.A Compressor's Check Valves Perform An Essential Function. The Check Valve Prevents Air From Escaping The Tank Back Into The Pump Head. Before Replacing The Valve, Make Sure The Compressor Is Totally Shut Down..
Features
- Excellent replacement for the broken check valve of your air compressor.The entire body of this check valve is made of solid brass, which is strong and not easily corroded, suitable for long time use. Excellent replacement for the broken check valve of your air compressor.
- Good Performance: Air compressor check valve has compressive strength, corrosion resistance, high performance and high reliability.A compressor's check valves perform an essential function. The check valve prevents air from escaping the tank back into the pump head. Before replacing the valve, make sure the compressor is totally shut down.
- The three male thread connectors are respectively for tube connecting, air tank and compressor piston pump.
- Male Thread Size: G1/8, G3/8, G1/2 . Please Check the size before you buy it dear friend !
- If you have any questions about our products, please contact us promptly.
- See more on Amazon...
Brand: Chiloskit | Manufacturer: Preamer
Weight: 0.02 Pounds
See On Amazon #7
Sellerocity Kit Unloader Hose W/ 2 Nuts/Ferrule Combos 2 Insert 24 Inches of 1/4 OD Tubing Compatible With Campbell Hausfeld ST117801AV
Asin: B07R3TPDSH | Ean: 0689384430667 | UPC: 689384430667
6 Month No Hassle Warranty.
Features
- Includes 24" of 1/4" OD tube, 2 nut / ferrule combos, 2 inserts
- 6 month no hassle warranty
- See more on Amazon...
Brand: Sellerocity | Manufacturer: Sellerocity
Weight: 2.00 ounces
See On Amazon #8
New In tank Check valve for air compressor 1/2" comp x 1/2" mpt
Asin: B00276GZU4 | Model: C5050T | PartNumber: C5050T
Used To Prevent Backflow Of Air.
1/8" Female Npt Threads On The Side For An Unloader Port.
Features
- 1/2" NPT x 1/2" Compression Air Compressor in Tank Check Valve
- 1/8 Female NPT Threads on the side for an unloader port
- Used to prevent backflow of air
- See more on Amazon...
Brand: conrader | Manufacturer: CDI/STEUBY/CONRADER
Weight: 0.15 pounds
See On Amazon #9
Air Compressor Pilot Unloader Valve compatible/replacement 5131609-00 95-125
Asin: B00B7CJ876 | Model: BG1M 95-125 | PartNumber: BG1M 95-125 | Ean: 0724453991981 | UPC: 724453991981
Bg-Valve 131B Pilot Unloader Valve Factory Setting 95-125Psi – 131B Pilot Unloader Valve For Compressors.
5131609-00.
Pressure Adjustable Rolair - Jenny - Emglo.
Features
- Has hand toggle unloader for easy starting. 1/4" MPT x 1/8" FPT for Chech Valve
- Pressure Adjustable Rolair - Jenny - Emglo
- BG-Valve 131B Pilot Unloader Valve Factory setting 95-125PSI 131B Pilot Unloader Valve for Compressors
- 5131609-00
- See more on Amazon...
Brand: conrader | Manufacturer: Conrader_
Weight: 0.64 pounds
See On Amazon #10
CV221500AJ CAMBELL HAUSFELD SUPER IN TANK CHECK VALVE 1/2 COMPRESSION X 1/2 MNPT
Asin: B01IGJX1U2 | Model: CTLD1212 | PartNumber: CTLD1212 | Ean: 0687927982772 | UPC: 687927982772
20 Cfm 1/8" Unloader Port Included (Plug If Not Needed).
Features
- 1/2" COMPRESSION TOP INLET X 1/2" MALE (NPT) PIPE THREAD OUTLET TO TANK
- 20 CFM 1/8 UNLOADER PORT INCLUDED (PLUG IF NOT NEEDED)
- See more on Amazon...
Brand: Skdorpfm | Manufacturer: CONRADER
See On Amazon #11
Air Compressor Pilot Unloader Valve 131B 125-150 PSI Replacement
Asin: B00UEUMMTI | Model: B00UEUMMTI_CA NARF | PartNumber: B00UEUMMTI_CA NARF | Ean: 0795525333206 | UPC: 795525333206
131B Pilot Unloader Valve For Compressors.
Rolair - Jenny - Emglo Replacement.
Bg-Valve 131B Pilot Unloader Valve Factory Setting 125Psi-150Psi – Replacement.
Features
- Has Hand toggle have unloader and discharges pump air through felt muffler. For pumps without head unloaders and tanks with check valves. 3/8" MPT x 1/8" FPT for throttle control 1/8" FPT for check valve port. Factory preset, yet can be adjusted for higher or lower pressures.
- BG-Valve 131B Pilot Unloader Valve Factory setting 125PSI-150PSI Replacement
- 131B Pilot Unloader Valve for Compressors
- Rolair - Jenny - Emglo Replacement
- See more on Amazon...
Brand: R Conrader
See On Amazon #12
New In tank Check valve for air compressor 1/2" FPT x 1/2" MPT
Asin: B003H7ITEW | Model: 43211-1866 | PartNumber: 43211-1866 | Ean: 0685650061467 | UPC: 685650061467
Side Un-Loader Port: 1/8” Female Npt Threads, Which Measure About 10/32” In Diameter. This Port Is Used For A Un-Loader Line, Some Compressors Do Not Have This If Yours Does Not You Would Just Plug This Port..
Brass.
1/2" Male Npt X 1/2" Female Npt Check Valve.
Outlet Threads: Male Npt Which Measure About 26/32 In Diameter These Threads Are The Male Threads That Screw Into The Air Tank..
Features
- Air inlet threads: 1/2" female npt which measure about 24/32 in diameter
- Outlet threads: male npt which measure about 26/32 in diameter these threads are the male threads that screw into the air tank.
- Side un-loader port: 1/8 female npt threads, which measure about 10/32 in diameter. This port is used for a un-loader line, some compressors do not have this if yours does not you would just plug this port.
- 1/2 Male NPT x 1/2 Female NPT Check Valve
- Brass
- See more on Amazon...
Brand: conrader | Manufacturer: Conrader
See On Amazon #13
Air Compressor Unloader Control/Throttle Control Pilot Valve 125-150 PSI
Asin: B072QBFRJR | Model: RCB-M-HU-125-150 | PartNumber: RCB-M-HU-125-150
1/4" Male Npt Connection Thread.
Manufactured By Conrader Valves Made In Usa.
Pressure Range 125-150 Psi.
Pilot Control Valve For Air Compressor Application.
Features
- All Brass Construction
- Pilot Control Valve For Air compressor Application
- 1/4 Male NPT Connection Thread
- Pressure Range 125-150 PSI
- Manufactured By Conrader Valves Made In USA
- See more on Amazon...
Brand: compressor-source | Manufacturer: Conrader
Weight: 0.50 pounds
See On Amazon #14
New In tank Check valve for air compressor 3/8" comp x 1/2" mpt
Asin: B0195UDYLC | Model: C3850T | PartNumber: C3850T
Side Un-Loader Port: 1/8” Female Npt Threads, Which Measure About 10/32” In Diameter. This Port Is Used For A Un-Loader Line, Some Compressors Do Not Have This If Yours Does Not You Would Just Plug This Port..
Brass.
1/2" Npt X 3/8" Compression Check Valve.
Outlet Male Threads: _” Npt Which Measure About 26/32” In Diameter These Threads Are The Male Threads That Screw Into The Air Tank..
Features
- Air inlet threads: 3/8 compression which measure about 16/32 in diameter
- Outlet male threads: _ npt which measure about 26/32 in diameter these threads are the male threads that screw into the air tank.
- Side un-loader port: 1/8 female npt threads, which measure about 10/32 in diameter. This port is used for a un-loader line, some compressors do not have this if yours does not you would just plug this port.
- 1/2 NPT x 3/8 Compression Check Valve
- Brass
- See more on Amazon...
Brand: CDI/Conrader/Steuby | Manufacturer: Conrader
Weight: 0.15 pounds
See On Amazon #15
New In tank Check valve for air compressor 3/4" FPT x 3/4" MPT
Asin: B0195UP320 | Model: 43219-22876 | PartNumber: 43219-22876
450 Psi Max Pressure 400 Deg F. Max Temperature.
30 Scfm Flow Rate.
1/8" Unloader Port Included.
Made In Usa. Please Note. 3/4" Npt Measure 1.050 On A Tape Measure.
Features
- 3/4" FEMALE (NPT) PIPE THREAD TOP X 3/4" MALE (NPT) PIPE THREAD OUTLET TO TANK
- MADE IN USA. PLEASE NOTE. 3/4 NPT MEASURE 1.050 ON A TAPE MEASURE
- 450 PSI MAX PRESSURE 400 DEG F. MAX TEMPERATURE
- 1/8 UNLOADER PORT INCLUDED
- 30 SCFM FLOW RATE
- See more on Amazon...
Brand: CHECK VALVE | Manufacturer: CHECK VALVE
Weight: 0.51 pounds
See On Amazon #16
Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E
Asin: B01N4S0OIH | Model: NG42 110-140 | PartNumber: NG42 110-140 | Ean: 0724453990281 | UPC: 724453990281
110 - 140 Psi Factory Setting. Pressure Can Be Adjusted 30-40 Psi Up Or Down.
30 Scfm Rating ! Pressure Can Be Adjusted 30-40 Psi Higher Or Lower. If Pressure Adjustment Is Needed, Please See Pic Attachment For Adjustment Instructions..
1/2" Metric Flare Top Inlet X 3/8" Male Pipe Thread Outlet To Air Tank.
Check Valve /Unloader Valve / Pilot Valve All In One - (Continuous Run Unloader) For Gas & Electric Powered Air Compressors.
Features
- Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA
- Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors
- 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down
- 1/2 Metric Flare TOP Inlet x 3/8 Male Pipe Thread outlet to air tank
- 30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions.
- See more on Amazon...
Brand: Ei | Manufacturer: Conrador
See On Amazon #17
Sellerocity Brand Kit Air Compressor Tube Unloader Hose 40" Compatible With Emglo Jenny 610-1091 Dewalt A12463 Contains Nut & Ferrule With Inserts
Asin: B07F3QD1GD | Ean: 0689003339029 | UPC: 689003339029
Six-Month, No-Hassle Warranty!.
Compatible With Emglo Jenny Model 610-1091; Dewalt Model A12463.
Features
- Kit includes 40 inches of tubing, 2 nut/ferrule combos, and 2 inserts
- Compatible with Emglo Jenny model 610-1091; Dewalt model A12463
- Six-month, no-hassle warranty!
- See more on Amazon...
Brand: Sellerocity | Manufacturer: Sellerocity
Weight: 3.00 ounces
See On Amazon #18
Air Compressor Pilot check valve unloader combination gas discharge 95-125 1/2" FPT TOP INLET X 1/2" MNPT OUTLET FOR GAS COMPRESSORS
Asin: B00NU50ZPM | Model: NG5 95-125 | PartNumber: NG5 95-125 | Ean: 0756655573252 | UPC: 756655573252
The Pilot Valve Is Set For 100-125 Psi From The Factory, But Can Be Adjusted If Needed 30-40 Psi Higher Or Lower..
There Is An 1/8" Port On The Side For A Throttle Control Valve Or Cable..
This Valve Has A 1/2" Female Npt Air Inlet And A 1/2" Male Npt Air Outlet..
Most Commonly Used On Gas Powered Air Compressors..
Features
- Air Compressor Piloted Unloader Valve with built in check valve.
- Most commonly used on Gas Powered Air Compressors.
- The pilot valve is set for 100-125 PSI from the factory, but can be adjusted if needed 30-40 PSI higher or lower.
- This valve has a 1/2 Female NPT Air Inlet and a 1/2 Male NPT Air outlet.
- There is an 1/8 port on the side for a throttle control valve or cable.
- See more on Amazon...
Brand: conrader | Manufacturer: Conrader
See On Amazon #19
Therwen 4 Pcs Air Compressor Relief Pressure Safety Valve and Air Gauge Set, 1/4" NPT Air Tank Valve 0-200 PSI Air Pressure Gauge for Air Tank Accessory (200 PSI)
Asin: B0CBV1RNMN
Reliable And Safe: Our Safety Valve Air Compressor Comes With A Thread Diameter Of About 1/4 Inch, Fits Well Into Most Air Compressors, Making It A Widely Applicable And Practical Accessory For Various Air Compressor Models, Suitable For Discharging Air, Water And Oil From Air Compressor, And The Quality Material Ensures Its Performance After Long Term Application.
Practical Function: The 200 Psi Pressure Relief Valve Can Reduce The Overpressure Or Vacuum In The System; When The Pressure In The Air Compressor Box Exceeds The Preset Level, The Valve Opens And Lets Fluid Or Gas Escape To Reduce Air Pressure.
Warm Notes: The Air Pressure Relief Valve Is Applied In High Temperature Applications Up To 250 Degrees Fahrenheit, Please Pay Attention To Safety When Applying, The Working Pressure For Safe Release Is 200Psi, The Flow Rate Is 49 Scfm, And The Temperature Range Is 32-176 Degrees Fahrenheit.
Quality Material: Our Air Tank Valve Is Made Of Quality Brass, Sturdy And Anti Corrosion, With High Temperature Ductility And Low Magnetic Permeability, Ensuring Long Lasting Performance; The Air Pressure Gauge Is Crafted From Lightweight And Sturdy Stainless Steel, Providing Accurate Readings For Years.
Features
- Comprehensive Package: the package contains 2 pieces of pressure relief valve and 2 pieces of air compressor gauges, enough to meet your needs to monitor and maintain air compressor
- Quality Material: our air tank valve is made of quality brass, sturdy and anti corrosion, with high temperature ductility and low magnetic permeability, ensuring long lasting performance; The air pressure gauge is crafted from lightweight and sturdy stainless steel, providing accurate readings for years
- Reliable and Safe: our safety valve air compressor comes with a thread diameter of about 1/4 inch, fits well into most air compressors, making it a widely applicable and practical accessory for various air compressor models, suitable for discharging air, water and oil from air compressor, and the quality material ensures its performance after long term application
- Warm Notes: the air pressure relief valve is applied in high temperature applications up to 250 degrees Fahrenheit, please pay attention to safety when applying, the working pressure for safe release is 200PSI, the flow rate is 49 SCFM, and the temperature range is 32-176 degrees Fahrenheit
- Practical Function: the 200 psi pressure relief valve can reduce the overpressure or vacuum in the system; When the pressure in the air compressor box exceeds the preset level, the valve opens and lets fluid or gas escape to reduce air pressure
- See more on Amazon...
Brand: Therwen | Manufacturer: Therwen
See On Amazon #20
49816283C Ingersoll Rand Pilot Unloader Check Valve T30 Gas Power Air Compressor
Asin: B01MTBZBWT | Model: NG13p1 | PartNumber: NG13p1 | Ean: 0724453990236 | UPC: 724453990236
Solid Brass Made In Usa Oem Part Number: 49816283-C.
Throttle Control Valve Port: 1/8" Female Npt Factory Set On / Off: 145-175 Psi.
For Use With Ingersoll Rand T30 Gas Powered Air Compressors.
Inlet: 5/8" Inverted Flare Tank Connection: 1/2" Female Npt.
Features
- Brand new Ingersoll Rand in-line piloted unloader check valve combination with relief valve, part number: 49816283-C.
- Inlet: 5/8 Inverted Flare Tank Connection: 1/2 Female NPT
- Solid Brass Made In USA OEM Part Number: 49816283-C
- For Use With Ingersoll Rand T30 Gas Powered Air Compressors
- Throttle Control Valve Port: 1/8 Female NPT Factory Set ON / OFF: 145-175 PSI
- See more on Amazon...
Brand: Ei | Manufacturer: Conrador
See On Amazon
Looking For Something Else?
Search