JEGS Camshaft Bearing Installation Tool | For Small Block Chevy | Aluminum Pilot & Driver
Asin: B06X6KGN77 | Ean: 0889944083931 | UPC: 889944083931
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Aluminum Pilot And Driver To Aid In Correct And Accurate Installation.
A Must Have For Your Engine Rebuild Tool Arsenal.
24-⅝ Inch Long Steel Shaft For Strength And Ease Of Installation.
Specifically Made For Small Block Chevrolet Engines Such As 283, 307, 327, 350, 400, And Others.
Features
- REMOVE AND INSTALL CAMSHAFT BEARINGS without scarring or scratching
- SPECIFICALLY MADE FOR SMALL BLOCK CHEVROLET ENGINES such as 283, 307, 327, 350, 400, and others
- ALUMINUM PILOT AND DRIVER to aid in correct and accurate installation
- 24- INCH LONG STEEL SHAFT for strength and ease of installation
- A MUST HAVE for your engine rebuild tool arsenal
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.00 x 1.90 x 25.90 inches | Weight: 5.00 pounds
See On Amazon Similar To JEGS Camshaft Bearing Installation Tool
#1
DASBET Crank Bearing Camshaft Seal Installer and Remover Set Seal Drive Set Crankshaft Oil Seal Puller Tool Kit
Asin: B0BL28LN86 | Model: DST-1101A | PartNumber: DST-1101A
Function:The Seal Installer Tool Allows Quick Replacement Of The Crank Seal Without Removing The Crank Case, Which Can Save You Time And Cost. Don't Worry About Scratching The Crank Surface.Ut Removing The Crank Case, Which Can Save You Time And Cost. Don't Worry About Scratching The Crank Surface..
Universal Compability:This Crank Bearing Camshaft Seal Removal Tool Is Suitable For A Wide Range Of Cars With Oil Seals Between 27Mm And 58Mm (1.06"-2.28") In Diameter..
Easy To Store:Our Crankshaft Oil Seal Removal Tool Kit Comes With A Storage Case For Safe & Easy Transport And Storage.It Is Easy To Carry And Meet Your Needs Anytime, Anywhere..
High Quality: The Camshaft Oil Seal Puller Tool Is Made Of High-Quality Carbon Steel, With High Hardness, High Durability, Not Easy To Deform, Not Easy To Break. It Is Equipped With An Aluminum Sealing Adapter To Avoid Damage To The Crank, Convenient And Practical..
Features
- Specification: Bolt Adapter(0.3-0.8in/8-20mm), Sealing Adapter (1.1-2.5in/28-64mm), Gasket (0.4-1.1in/10-27mm)
- High Quality: The Camshaft oil seal puller tool is made of high-quality carbon steel, with high hardness, high durability, not easy to deform, not easy to break. It is equipped with an aluminum sealing adapter to avoid damage to the crank, convenient and practical.
- Function:The seal installer tool allows quick replacement of the crank seal without removing the crank case, which can save you time and cost. Don't worry about scratching the crank surface.ut removing the crank case, which can save you time and cost. Don't worry about scratching the crank surface.
- Easy to Store:Our crankshaft oil seal removal tool kit comes with a storage case for safe & easy transport and storage.It is easy to carry and meet your needs anytime, anywhere.
- Universal Compability:This crank bearing camshaft seal removal tool is suitable for a wide range of cars with oil seals between 27mm and 58mm (1.06-2.28) in diameter.
- See more on Amazon...
Brand: DASBET | Manufacturer: DASBET
Warranty: 6 Months
See On Amazon #2
Acymner Cam Bearing Removal and Installation Tool Set | Camshaft Bearing Tool Installation Removal Ranging from 1.125" to 2.690" for Most Domestic and Imported Vehicle Trucks
Asin: B0BK8LSJC3 | Model: ZH1024-1 | PartNumber: ZH1024-1
High Performance: Our Adapters' Neoprene Sleeves Not Only Protect Them From Wear And Tear But Also Make The Adapters Easier To Use, Quickly And Easily Pulling And Installing Your Cam Bearings. Remove Or Insert Camshaft Bearings In Nearly All Engines From Compact Cars To Heavy Trucks..
Complete Cam Bearing Set: Include 5 X Expanding Bearing Adapters,1 X Nylon Centering Cone,1 X Adapter Washer,5 X Replacement Rubber Sleeves,1 X Tool Shaft,1 X Expander Assembly,1 X Tool Shaft Extension,1 X Storage Case For Quick Transportation, Simple Storage, And Organization..
Wide Applications: The Adapters Give Our Expander Assembly A Range From 1-1/8 Inch To 2-2/3 Inches, Allowing It To Work With The Camshaft Bearings In The Engines Of Nearly All Domestic And Import Vehicles From Compact Cars To Heavy Trucks..
Premium Quality: The Cam Bearing Installation Tool Is Constructed Of 45# Steel For Extra Strength And Longevity; Each Remover Is Heat-Treated And Sandblasted For Superior Strength And Scratch-Free Performance. Feature With Long Service Life, Suitable For Home And Car Repair Shop Use..
Features
- Funtion: Our engine universal bearing installation tool is designed for disassembling and installing of bearings, it can also be inserted into bearings and drives bearings smoothly. The tool set is plug and play, and can pull and install your bearings quickly and easily.
- Premium Quality: The cam bearing installation tool is constructed of 45# steel for extra strength and longevity; each remover is heat-treated and sandblasted for superior strength and scratch-free performance. Feature with long service life, suitable for home and car repair shop use.
- High performance: Our adapters' neoprene sleeves not only protect them from wear and tear but also make the adapters easier to use, quickly and easily pulling and installing your cam bearings. Remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks.
- Wide Applications: The adapters give our expander assembly a range from 1-1/8 inch to 2-2/3 inches, allowing it to work with the camshaft bearings in the engines of nearly all domestic and import vehicles from compact cars to heavy trucks.
- Complete Cam Bearing Set: Include 5 x Expanding bearing adapters,1 x Nylon centering cone,1 x Adapter washer,5 x Replacement rubber sleeves,1 x Tool shaft,1 x Expander assembly,1 x Tool shaft extension,1 x storage case for quick transportation, simple storage, and organization.
- See more on Amazon...
Brand: Acymner | Manufacturer: Acymner
Warranty: 6 Months
See On Amazon #3
Universal Camshaft Pulley Holder Tool Camshaft Pulley Removal Tool Cam Pulleys Holder Cam Sprocket Holding Tool Compatible with Dodge Audi Chrysler Ford GM Honda Mazda Nissan Toyota Volvo
Asin: B08ZYQT6P8 | Model: Lendpea-01 | PartNumber: Lendpea-01 | Ean: 0770807338728 | UPC: 770807338728
Made Of High Quality Steel For Durability And Perfect Match, Non Slip Rubber Grip.
Designed To Hold Camshaft Gears Stationary, Injection Pump, Other Gears And Pulleys For Both Loosening And Tightening Cam Pulley Bolts.
Designed To Hold Camshaft Gears Stationary, Injection Pump, Other Gears And Pulleys For Both Loosening And Tightening Cam Pulley Bolts.
Features
- Made of high quality steel for durability and perfect match, non-slip rubber grip
- Designed to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts
- Made of high quality steel for durability and perfect match, non slip rubber grip
- Designed to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts
- See more on Amazon...
Brand: Lendpea | Manufacturer: Lendpea
See On Amazon #4
Clevite 77 SH-290S Engine Camshaft Bearing Set
Asin: B000COTYZQ | Model: SH-290S | PartNumber: SH-290S | Ean: 0027067619273 | UPC: 027067619273
Lead Based Babbitt Provides Ideal Properties For Nearly All Engine Applications. Superior Embed Ability, Conformability, And Anti-Seizure Characteristics Have Proven To Reduce Engine Failures.
Manufactured To Meet Or Exceed Oe Specifications.
Constructed Of Seamless Steel Tube With A Thin Layer Of Lead Based Babbitt Material. Seamless Construction Makes Installation Easy, Eliminating Breakage And Bearing Surface Interruptions..
Features
- 100% machined surface design provides the tightest tolerances in the industry. Increased system design flexibility.
- Constructed of seamless steel tube with a thin layer of lead based Babbitt material. Seamless construction makes installation easy, eliminating breakage and bearing surface interruptions.
- Lead based Babbitt provides ideal properties for nearly all engine applications. Superior embed ability, conformability, and anti-seizure characteristics have proven to reduce engine failures
- Manufactured to meet or exceed OE specifications
- See more on Amazon...
Brand: Clevite 77 | Manufacturer: Clevite
Dimensions: 1.00 x 7.00 x 5.00 inches
See On Amazon #5
DPTOOL Camshaft Holding Tool Timing Alignment Holder Tool Kit Compatible with Ford Lincoln Mercury 3.5L 3.7L 4V Engines Replace 303-1248 303-1530 OTC 6682 with RT11 Removal Socket and Portable Case
Asin: B0C1B741YJ | Model: HFORD1248 | PartNumber: HFORD1248
Sturdy And Durable: Made Of High Standard Structural Steel And Coated With Black Oxide Finish, It Is Excellent Solid With Great Durability. Plus, It Has Good Performance On Rust And Crack Resistance To Long-Lasting Service Your Engine.
Package Includes: Includes 2 X Camshaft Holding Tool, 1 X Tension Tool, 1 X Rt11 Cr-Mo Tool Of Removing Camshaft Screw And Portable Case. We Offer Lifetime Warranty, We Will Refund Or Replace, If The Product Have Any Quality Problem.
Professional Timing Tool: This Camshaft Timing Alignment Holder Tool Work Great Holding The Cams To Do A Water Pump. Easy To Used And Holds Great.Use This Tool To Accurately Position And Align Hold Your 3.5L & 3.7L Camshaft At Tdc To Perform Service.
Exact Match: This Camshaft Holding Tool Timing Tool Set Designed Specifically For Ford V6 3.5L & 3.7L Cyclone Engines, High Precision And Great Compatibility , And Through Rigorous Engine Testing, While Is Not A Genuine Original, It Is A Direct Replacement And Completely Fit, Better Than Spending $300 For A Car Factory Brand Tool.
Features
- Applicable Vehicle: Fit Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor; for Lincoln MKS, MKT, MKX, MKZ, Navigator; for Mercury Milan, Sable, Replace 303-1248 303-1530 OTC 6682
- Exact Match: This camshaft holding tool timing tool set designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility , and through rigorous engine testing, While is not a genuine original, it is a direct replacement and completely fit, better than spending $300 for a car factory brand tool
- Sturdy and Durable: Made of high standard structural steel and coated with black oxide finish, it is excellent solid with great durability. Plus, it has good performance on rust and crack resistance to long-lasting service your engine
- Professional Timing Tool: This camshaft timing alignment holder tool work great holding the cams to do a water pump. easy to used and holds great.Use this tool to accurately position and align hold your 3.5L & 3.7L camshaft at TDC to perform service
- Package Includes: Includes 2 x Camshaft Holding Tool, 1 x Tension Tool, 1 x RT11 Cr-MO Tool of Removing Camshaft Screw and Portable Case. We offer lifetime warranty, we will refund or replace, if the product have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
Warranty: 12 months warranty
See On Amazon #6
LOSTAR Cam Bearing Installation & Removal Driver Tool for Chevy SBC Small Block Engine
Asin: B09PMZVLVF | Ean: 0738712255127 | UPC: 738712255127
✅Made From High-Quality Materials, Reliable Performance And Superior Longevity..
✅1 Year Unlimited-Mileage Quality Guarantee.
✅Quick & Easy Cam Bearing Installation Tool. Helps Keep The Cam Bearings Square..
✅Description: Sbc Chevy Cam Bearing Driver. Used To Install And Remove Cam Bearings, For Sbc Engines.
Features
- Note: Will NOT work for LS based engines!
- Description: SBC Chevy Cam Bearing Driver. Used to install and remove cam bearings, For SBC Engines
- Made from high-quality materials, reliable performance and superior longevity.
- Quick & Easy cam bearing installation tool. Helps keep the cam bearings square.
- 1 Year Unlimited-mileage Quality Guarantee
- See more on Amazon...
Brand: LOSTAR | Manufacturer: LOSTAR
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 1.00 Pounds
See On Amazon #7
8MILELAKE Universal Camshaft Bearing Tool Installation Removal with Case
Asin: B077FRKTZJ | Ean: 0602989775940 | UPC: 602989775940
Range Of 1.1 25Inches To 2.69Inches (28.58 - 68.3Mm). Easy On Bearings..
Includes - Driving Shaft, Driving Shaft Extension, Expander Unit, Five Split Driving Plugs, Two Driving Collars, Centering Cone And Blow Molded Case..
The Expander Has A Neoprene Sleeve Over Which The Split Driving Plugs Are Mounted & Expanded To Size. This Tool Has Two Sets Of Rubber Sleeves Supplied W/ It For Each Expanding Driver..
One Complete Low Cost Set That Will Remove Or Insert Camshaft Bearings In Nearly All Engines From Compact Cars To Heavy Trucks..
Features
- Drives camshaft bearings smoothly
- One complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks.
- Range of 1.1 25inches to 2.69inches (28.58 - 68.3mm). Easy on bearings.
- The expander has a neoprene sleeve over which the split driving plugs are mounted & expanded to size. This tool has two sets of rubber sleeves supplied w/ it for each expanding driver.
- Includes - Driving shaft, driving shaft extension, expander unit, five split driving plugs, two driving collars, centering cone and blow molded case.
- See more on Amazon...
Brand: 8MILELAKE | Manufacturer: freebirdtrading
Dimensions: 3.15 x 29.53 x 5.91 inches
See On Amazon #8
LS Harmonic Balancer Installation Tool Compatible with GM 1997-UP V8 LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9 Upgraded Crank Pulley Install Tool with Three-Part Thrust Bearing
Asin: B0BNHM3PB1 | Model: Harmonic Balancer Installation Tool | PartNumber: Harmonic Balancer Installation Tool
【High Quality】- The Crank Install Tool Set Is Made Of High Quality Steel Material. Durable And Corrosion Resistance. Anti-Wear, Sturdy And Durable And With Long Life. Meets Or Exceeds Oem Standards, 100% Rigorously Tested Before Shipping.
【12-Month Warranty】 - Package Include 1 X Threaded Rod, 1 X Flange Nut, 2 X Washers, 1 X Thrust Ball Bearing. If You Have Any Questions About Ls Harmonic Balancer Installation Tool, Please Contact Us And We Will Reply You As Soon As Possible.
【Easy To Use】- You Can Thread The Tool Into The Crankshaft Until It Seats, And Slowly Twist The Nut Until The Pulley Is In Place. Direct To Replace And Easy Installation. Great Replacement For The Broken Or Bad Ls Harmonic Balancer Installation Tool.
【Fitment】- Harmonic Balancer Installation Tool Compatible With All Gm Ls & Lt Series Engines 1997-Current (Gen 3, 4, & 5). And Fit For Camaro, Corvette, Trans Am, Gto, G8, Ls Truck Or Ls Power Road Signs. Please Note That The Crank Pulley Installation Tool Does Not Fit For 1992-1997 Gen 2 Lt1 5.7 Engines..
Features
- UPGRADED HARMONIC BALANCER INSTALLER - The crank pulley installer tool is equipped with two washers and one thrust bearing. Two washers plus a thrust bearing used together will safe to help thread into the crankshaft and push the crankshaft pulley into position
- FITMENT - Harmonic Balancer Installation Tool Compatible with all GM LS & LT series engines 1997-current (Gen 3, 4, & 5). And fit for Camaro, Corvette, Trans Am, GTO, G8, LS Truck Or LS Power Road Signs. Please note that the crank pulley installation tool does NOT fit for 1992-1997 Gen 2 LT1 5.7 Engines.
- HIGH QUALITY - The crank install tool set is made of high quality steel material. Durable and corrosion resistance. Anti-wear, sturdy and durable and with long life. Meets or exceeds OEM standards, 100% rigorously tested before shipping
- EASY TO USE - You can thread the tool into the crankshaft until it seats, and slowly twist the nut until the pulley is in place. Direct to replace and easy installation. Great replacement for the broken or bad LS Harmonic Balancer Installation Tool
- 12-MONTH WARRANTY - Package include 1 x Threaded Rod, 1 x Flange Nut, 2 x Washers, 1 x Thrust Ball Bearing. If you have any questions about LS Harmonic Balancer Installation Tool, please contact us and we will reply you as soon as possible
- See more on Amazon...
Brand: HNeekyr | Manufacturer: Heiher
Warranty: 2 Year Warranty
See On Amazon #9
Crown Automotive Oil Pump Drive Assembly Engine
Asin: B00NEW6GTA | Model: 53010624AC | PartNumber: 53010624AC | Ean: 0849603004639 | UPC: 849603004639
Top Quality Products.
Durable And Long Lasting.
Fit Type: Vehicle Specific.
Enhance The Style, Comfort And Functionality Of Your Vehicle.
High Quality Construction.
Features
- Direct Replacement
- High quality construction
- Top quality products
- Enhance the style, comfort and functionality of your vehicle
- Durable and long lasting
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: CROWN AUTO | Manufacturer: Crown Automotive Sales Co. Inc
Dimensions: 5.75 x 9.75 x 7.00 inches | Weight: 2.50 Pounds
See On Amazon #10
LS LT Harmonic Balancer Installation Tool Crank Crankshaft Pulley Installer with Thrust Bearing and Hex Wrench Flats For Chevrolet GM LS & LT Series V8 Engines LS1 LSX LS3 Vortec LQ4 L76 LT1 LT4
Asin: B09T5T8XG8
Package Include: 1 Threaded Stud With Wrench Flats, 1 Thrust Bearing, 1 Extended Length Nut, 1 Protective Hanger, 3 Washers. (Total 8 Pieces).
Satisfaction Guarantee--100% Satisfaction Guarantee. Please Feel Free To Contact Us If You Have Any Questions About Our Product..
Material: Made Of Heavy-Duty Steel, Treated With Black Powder Finish Against Rust And Corrosion, Solid And Durable..
Easy To Use: Only Thread The Tool Into The Crankshaft, And Then Tighten The Nut Until The Harmonic Balancer Is In Place. This Is A Must-Have Tool For Replacing Engines Or Upgrading Harmonic Balancers..
Features
- APPLICATION: The harmonic balancer installation tool fit for 1997-current (Gen 3, 4, & 5) Chevrolet all GM LS & LT series engines LS1 LSX LS3 Vortec 4.8L 5.3L 5.7L 6.0L 6.2L LQ4 L76 LT1 LT4. NOT work for 1991-1997 LT1 Gen 2 Engines.
- EASY TO USE: Only thread the tool into the crankshaft, and then tighten the nut until the harmonic balancer is in place. This is a must-have tool for replacing engines or upgrading harmonic balancers.
- PACKAGE INCLUDE: 1 threaded stud with wrench flats, 1 thrust bearing, 1 extended length nut, 1 protective hanger, 3 washers. (Total 8 pieces)
- MATERIAL: Made of heavy-duty steel, treated with black powder finish against rust and corrosion, solid and durable.
- Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product.
- See more on Amazon...
Brand: Hihitomorrow | Manufacturer: Hihitomorrow
Dimensions: 2.24 x 9.45 x 2.36 inches
See On Amazon
Looking For Something Else?
Search