Shift Shaft Oil Seal - 14X28X7 - Fits Honda GL1000/1100/1200-1975-1987-91206-286-013
Asin: B06XDXC8JZ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Replaces Honda Part Numbers: 91202-965-003, 91202-965-004, 91202-Mjt-E01, 91206-286-003, 91206-286-005, 91206-286-013, 91206-Kcs-920, 91206-Ma6-003, 91206-Ma6-005, 91221-Vm0-003, 91221-Vm0-004.
Clean Everything Thoroughly And Install The New Seal With A Deep Socket With The Same Outer Diameter As The Seal Or A Seal Driver. Make Sure To Push It In Evenly. An Oil Tight Engine Puts The Mind At Ease And It Keeps The Engine Lubricated!.
Dimensions: 14 X 28 X 7 Material: Nbr (Nitrile).
Check Fitment Below.
Features
- 14 x 24 x 5 oil seal for the models listed below. This seal was used as a kickstart seal on the right crankcase cover for several models including the CB160. Please check your model to find out where it was used.
- Check Fitment Below
- Replaces Honda Part Numbers: 91202-965-003, 91202-965-004, 91202-MJT-E01, 91206-286-003, 91206-286-005, 91206-286-013, 91206-KCS-920, 91206-MA6-003, 91206-MA6-005, 91221-VM0-003, 91221-VM0-004
- Dimensions: 14 X 28 X 7 Material: NBR (Nitrile)
- Clean everything thoroughly and install the new seal with a deep socket with the same outer diameter as the seal or a seal driver. Make sure to push it in evenly. An oil tight engine puts the mind at ease and it keeps the engine lubricated!
- See more on Amazon...
Brand: 4into1 | Manufacturer: 4into1
Weight: 0.06 pounds
See On Amazon Similar To Shift Shaft Oil Seal 14X28X7
#1
bylikeho Oil Extractor,Fluid Extractor,Car Accessories Auto Syringe Pump Automotive Fluid Syringe Pump Manual Suction Vacuum Fuel for Power Steering Transmission Gear Oil & Brake Fluid Transfers
Asin: B0CSD2WZ66 | Model: 1303SCYCYB001 | PartNumber: 1303SCYCYB001
[Double Sealing Safety]This Oil Well Pump Adopts A Double Rubber Ring Design, Forming An Airtight Seal, And The Precision Thread At The End Can Prevent Any Leakage..
[Widely Applicable] The Car Oil Pump Is Used To Extract And Replace Transmission Fluid, Power Steering Fluid, Gear Oil, Antifreeze, And Brake Fluid, And Can Remove Mechanical Fluids From Atvs, Cars, Ships, Cars, Trucks, Rvs, Lawn Mowers, Golf Carts, And Other Vehicles..
[Features] The Syringe Style Drain Is Equipped With An Extension Tube With An Outer Diameter Of 1/4 "And An Outer Diameter Of 3/8". When Connected, It Can Reach A Maximum Length Of 40 Centimeters And Is Long Enough To Reach Difficult To Reach Positions, Making It Easy To Handle Any Engine Fluid..
[High Quality Materials]This Automatic Injection Pump Is Made Of High-Quality Materials And Has High Heat Resistance And Chemical Corrosion Resistance, Making It Sturdy And Durable..
Features
- [Package Includes] Automatic oil syringe package includes 1 transparent liquid syringe with locking adapter, 2 transparent tubes with end caps for brake fluid syringe pump accessories, and 1 non drip silicone connector for your convenience.
- [High Quality Materials]This automatic injection pump is made of high-quality materials and has high heat resistance and chemical corrosion resistance, making it sturdy and durable.
- [Double Sealing Safety]This oil well pump adopts a double rubber ring design, forming an airtight seal, and the precision thread at the end can prevent any leakage.
- [Features] The syringe style drain is equipped with an extension tube with an outer diameter of 1/4 and an outer diameter of 3/8. When connected, it can reach a maximum length of 40 centimeters and is long enough to reach difficult to reach positions, making it easy to handle any engine fluid.
- [Widely Applicable] The car oil pump is used to extract and replace transmission fluid, power steering fluid, gear oil, antifreeze, and brake fluid, and can remove mechanical fluids from ATVs, cars, ships, cars, trucks, RVs, lawn mowers, golf carts, and other vehicles.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #2
VAGURFO Car Scratch Remover,Car Scratch Repair,Car Accessories Car Scratch Repair Paint Pen,Scratch Remover for Vehicles,Portable Automotive Touch Up Paint for Deep Scratches,Fits Various Vehicles
Asin: B0CW1LD7LS | Model: 1352DTYQB002 | PartNumber: 1352DTYQB002
[Instructions] 1. Clean The Scratched Area Before Use. 2. Remove Wax From The Scratch Area. 3. Remove Rust. 4. Keep Upward After Use. 5. Easy To Dry, Please Tighten The Pen Cap After Using The Pen. You Can Practice On Some Scrap Metal Or Cardboard To Stabilize Your Hands And Allow For The Correct Amount Of Paint To Be Applied. Don't Worry, Take It Slow. You Will Find That This Is An Economic Method To Prevent Metal Rust..
[Widely Applicable] We Offer A Variety Of Color Car Paint Brushes For You To Choose From And Purchase. The Car Paint Adopts A Special Configuration Of The Original Color Label, Which Is Suitable For Most Brands Of Cars. It Can Quickly And Easily Repair Scratches On The Car, Restore The Appearance Of The Vehicle, And Is A Must-Have For Car Enthusiasts And Drivers..
[Kind Reminder] 1. To Ensure Effectiveness, Please Try To Use This Car Paint Filler Pen On Sunny Days. Before Using This Product, Please Make Sure To Remove Foreign Objects Such As Oil Stains, Wax, And Rust From The Surface Of The Car Paint. 3. Before Use, Please Make Sure To Shake The Bottle For More Than 20 Seconds To Make The Steel Balls Inside The Jar Creak, In Order To Mix The Paint Evenly..
[Save Money And Time]We Know That Ugly Car Scratches Can Make Your Car Look Unsightly And Expose The Metal Underneath The Paint To The Air, Causing Rust. This Car Repair Paint Can Seal Scratches And Save You A Lot Of Money To Repair Small Scratches. Save Money And Time, The Paint Surface Will Be More Glossy After Use, And The Color Difference Between The Repaired Area And The Original Car Paint Will Be Coordinated And Consistent. The Repaired Paint Surface Will Be More Natural..
Features
- [Soft Brush Head Design] The soft brush head design of the car repair paint pen makes the repair of scratches on the car paint surface more accurate and convenient, waterproof and portable, very practical.
- [Save Money and Time]We know that ugly car scratches can make your car look unsightly and expose the metal underneath the paint to the air, causing rust. This car repair paint can seal scratches and save you a lot of money to repair small scratches. Save money and time, the paint surface will be more glossy after use, and the color difference between the repaired area and the original car paint will be coordinated and consistent. The repaired paint surface will be more natural.
- [Instructions] 1. Clean the scratched area before use. 2. Remove wax from the scratch area. 3. Remove rust. 4. Keep upward after use. 5. Easy to dry, please tighten the pen cap after using the pen. You can practice on some scrap metal or cardboard to stabilize your hands and allow for the correct amount of paint to be applied. Don't worry, take it slow. You will find that this is an economic method to prevent metal rust.
- [Kind Reminder] 1. To ensure effectiveness, please try to use this car paint filler pen on sunny days. Before using this product, please make sure to remove foreign objects such as oil stains, wax, and rust from the surface of the car paint. 3. Before use, please make sure to shake the bottle for more than 20 seconds to make the steel balls inside the jar creak, in order to mix the paint evenly.
- [Widely Applicable] We offer a variety of color car paint brushes for you to choose from and purchase. The car paint adopts a special configuration of the original color label, which is suitable for most brands of cars. It can quickly and easily repair scratches on the car, restore the appearance of the vehicle, and is a must-have for car enthusiasts and drivers.
- See more on Amazon...
Brand: VAGURFO | Manufacturer: VAGURFO
See On Amazon #3
uxcell Oil Seal, TC 16mm x 28mm x 7mm Nitrile Rubber Cover Double Lip with Spring for Bearing Shaft, Black Pack of 1
Asin: B07HKC65KV | Model: a18081700ux0286 | PartNumber: a18081700ux0286
[Advantage] - Good Resistance To Many Petroleum Oils, Greases, Hydraulic Fluids, Mineral Oil, And Grease.
[Note] - Please Confirm The Required Size And Material Before Purchase, And Put It In The Right Place.
[Application] - Oil Seals Are Used To Protect Shafts And Bearings From Ingress Of Dirt And Foreign Matter And Egress Of Oil Or Grease.
[Nitrile Rubber] - Standard 70A With A Temperature Range From -4℉ (-20°C) To 212℉ (100°C).
Features
- [Metric Size] - 28mm Outside Diameter, 16mm Inner Diameter, 7mm Thickness
- [Nitrile Rubber] - Standard 70A with a temperature range from -4 (-20 C) to 212 (100 C)
- [Advantage] - Good resistance to many petroleum oils, greases, hydraulic fluids, mineral oil, and grease
- [Application] - Oil seals are used to protect shafts and bearings from ingress of dirt and foreign matter and egress of oil or grease
- [NOTE] - Please confirm the required size and material before purchase, and put it in the right place
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 3.15 inches
See On Amazon #4
bylikeho 12PCS Differential Oil Drain Plug Gaskets,Differential Transfer Case Crush Washer Gasket,Car Accessories Transfer&Differential Service Gasket Kit,Replace #9043024003, 1215710010, 90430A0003
Asin: B0CWR4QR6D | Model: 1401FDXFYDQ001 | PartNumber: 1401FDXFYDQ001
[Safe Fit]Our Drain Plug Gasket Meets Or Exceeds Oem Specifications, Providing A More Durable Sealing Capability. Tight And Flush, It Is Tighter And Safer Than Plastic Or Rubber Seals, And Has A More Durable Sealing Ability..
[Replacement Part Numbers] 9043024003, 1215710010, 90430A0003..
Flush, It Is Tighter And Safer Than Plastic Or Rubber Seals, And Has A More Durable Sealing Ability. [Specification] Oil Drain Plug Gasket: Size M18 * M24, Inner Diameter 18.2Mm, Outer Diameter 24.2Mm, Thickness 2.50Mm. Copper Washer: Inner Diameter: 24 Mm, Outer Diameter: 32 Mm, Nominal Size: M24 * M32, Thickness: 1 Mm. Aluminum Oil Drain Plug Gasket Is Used For Transfer Case 18Mm Aluminum Extruded Gasket..
[High Quality Materials]Our Shatterproof Gasket Drain Plug Is Made Of High-Quality Aluminum/Copper Steel Alloy, Ensuring Durability And Reliability. Advanced Manufacturing Technology Ensures Uniform Surface Cleanliness And Prevents Gasket Corrosion. These Drain Plug Gaskets Are Designed To Withstand The Most Extreme Conditions And Provide Long-Lasting Performance That You Can Trust..
Features
- [Set Includes]6 pieces of steel oil drain plug gaskets, 2 pieces of copper gaskets, and 4 pieces of aluminum oil drain plug gaskets. The comprehensive gasket kit is a complete set of front and rear differentials and transfer boxes.
- [High Quality Materials]Our shatterproof gasket drain plug is made of high-quality aluminum/copper steel alloy, ensuring durability and reliability. Advanced manufacturing technology ensures uniform surface cleanliness and prevents gasket corrosion. These drain plug gaskets are designed to withstand the most extreme conditions and provide long-lasting performance that you can trust.
- [Safe Fit]Our drain plug gasket meets or exceeds OEM specifications, providing a more durable sealing capability. Tight and flush, it is tighter and safer than plastic or rubber seals, and has a more durable sealing ability.
- flush, it is tighter and safer than plastic or rubber seals, and has a more durable sealing ability. [Specification] oil drain plug gasket: size M18 * M24, inner diameter 18.2mm, outer diameter 24.2mm, thickness 2.50mm. Copper washer: inner diameter: 24 mm, outer diameter: 32 mm, nominal size: M24 * M32, thickness: 1 mm. Aluminum oil drain plug gasket is used for transfer case 18mm aluminum extruded gasket.
- [Replacement part numbers] 9043024003, 1215710010, 90430A0003.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #5
bylikeho Oil Can,Oil Can Pump Oiler,Metal Pump Oil Can,Car Accessories Pistol Hand Pump Oil Can,8OZ Capacity Pump Oiler with Handle and 6" Metal Spout,250ml Gun Oil Spray Can for Home Auto Motorcycles
Asin: B0CRGTG15Y | Model: 1261BSZYQ001 | PartNumber: 1261BSZYQ001
[Design] Wide Base For Increased Stability And Better Placement Of Lubricants. Adopting A New Sealing Structure Technology, It Has Good Sealing Performance And Seamlessly Pulls The Bottom Of The Body Without Leakage..
[Widely Used] This Car Oil Pot Is Suitable For Lubrication Of Friction Components Such As Rolling Bearings And Sliding Bearings In Various Machinery. It Can Be Widely Used In The Fields Of Bicycles, Motorcycles, Automobiles, Household Appliances, Machinery, Etc..
[Easy To Use] Simple Thumb Pump Trigger, Compact Structure, Very Suitable For Oil Operations In Narrow Spaces Of Homes, Cars, Or Other Applications! This Spray Gun Oil Pot Is Equipped With Springs, Which Have Excellent Elasticity. The Manual Oil Pot Can Easily Pump And Lubricate Quickly. Say Goodbye To The Tedious And Time-Consuming Lubrication Process, And Enjoy Efficient And Worry Free Maintenance..
[Comfortable Handle] The Design Of This Motorcycle Oil Tank Oiler Takes Into Account User Comfort, With A Curved Pressing Handle That Provides A Comfortable Grip, Allowing For Easy And Precise Refueling Without Making Hands Or Wrists Tense..
Features
- [High Quality Materials]The metal pump oil tank is made of high-quality materials, with a surface spray coating that is wear-resistant and not easy to rust, sturdy and durable, and has a long service life.
- [Comfortable Handle] The design of this motorcycle oil tank oiler takes into account user comfort, with a curved pressing handle that provides a comfortable grip, allowing for easy and precise refueling without making hands or wrists tense.
- [Design] Wide base for increased stability and better placement of lubricants. Adopting a new sealing structure technology, it has good sealing performance and seamlessly pulls the bottom of the body without leakage.
- [Easy to Use] Simple thumb pump trigger, compact structure, very suitable for oil operations in narrow spaces of homes, cars, or other applications! This spray gun oil pot is equipped with springs, which have excellent elasticity. The manual oil pot can easily pump and lubricate quickly. Say goodbye to the tedious and time-consuming lubrication process, and enjoy efficient and worry free maintenance.
- [Widely Used] This car oil pot is suitable for lubrication of friction components such as rolling bearings and sliding bearings in various machinery. It can be widely used in the fields of bicycles, motorcycles, automobiles, household appliances, machinery, etc.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #6
uxcell Oil Seal, TC 14mm x 28mm x 7mm Nitrile Rubber Cover Double Lip with Spring for Bearing Shaft, Black Pack of 1
Asin: B07HKHDWXD | Model: a18081700ux0278 | PartNumber: a18081700ux0278
[Advantage] - Good Resistance To Many Petroleum Oils, Greases, Hydraulic Fluids, Mineral Oil, And Grease.
[Note] - Please Confirm The Required Size And Material Before Purchase, And Put It In The Right Place.
[Application] - Oil Seals Are Used To Protect Shafts And Bearings From Ingress Of Dirt And Foreign Matter And Egress Of Oil Or Grease.
[Nitrile Rubber] - Standard 70A Nbr With A Temperature Range From -4℉ (-20°C) To 212℉ (100°C).
Features
- [Metric Size] - 28mm Outside Diameter, 14mm Inner Diameter, 7mm Width
- [Nitrile Rubber] - Standard 70A NBR with a temperature range from -4 (-20 C) to 212 (100 C)
- [Advantage] - Good resistance to many petroleum oils, greases, hydraulic fluids, mineral oil, and grease
- [Application] - Oil seals are used to protect shafts and bearings from ingress of dirt and foreign matter and egress of oil or grease
- [NOTE] - Please confirm the required size and material before purchase, and put it in the right place
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 3.15 inches
See On Amazon #7
bylikeho 6 AWG Battery Cable,20 Inch Red&Black Battery Cable Battery Wire,Car Accessories Battery Power Inverter Cables Set with 3/8"Lugs Terminals,for Car Motor Automotive Motorcycle RV Marine Boat
Asin: B0CW2ZN5VB | Model: 1325DCDLX001 | PartNumber: 1325DCDLX001
[Ultimate Protection]These Cables Come With Sturdy Rubber Material Edge Sheaths, 105 Degree Flame Retardant, Providing Ultimate Protection And Ensuring Safety, While Also Resisting Wear And Harsh Environments. They Are Resistant To Oil, Gas, Salt Water, Battery Acid, Heat, Wear, And Sunlight..
[Widely Applicable] 6-Specification Inverter Cables Are Commonly Used In Power Applications Such As Cars, Trucks, Solar Energy, Rvs, Trailers, Golf Carts, Motorcycles, Lawn Mowers, Etc..
[With Terminals]Each Cable Comes With A Sealed Terminal Ring With Heat Shrink Function (Already Crimped) To Enable Installation On Battery Disconnect Devices/Switches.[Widely Applicable] 6-Specification Inverter Cables Are Commonly Used In Power Applications Such As Cars, Trucks, Solar Energy, Rvs, Trailers, Golf Carts, Motorcycles, Lawn Mowers, Etc..
[High Quality Materials]The Battery Cable Adopts Pure Oxygen And Oxygen Free Copper Wire To Achieve Maximum Conductivity. Copper Terminals Are Tin Plated To Minimize Corrosion, Are Durable, And Have A Long Service Life..
Features
- [Specification]6AWG battery cable with 3/8 "connector; battery cable length: 20 inches. Package includes 2 battery power cables (1 black and 1 red).
- [High Quality Materials]The battery cable adopts pure oxygen and oxygen free copper wire to achieve maximum conductivity. Copper terminals are tin plated to minimize corrosion, are durable, and have a long service life.
- [Ultimate Protection]These cables come with sturdy rubber material edge sheaths, 105 degree flame retardant, providing ultimate protection and ensuring safety, while also resisting wear and harsh environments. They are resistant to oil, gas, salt water, battery acid, heat, wear, and sunlight.
- [With Terminals]Each cable comes with a sealed terminal ring with heat shrink function (already crimped) to enable installation on battery disconnect devices/switches.[Widely Applicable] 6-specification inverter cables are commonly used in power applications such as cars, trucks, solar energy, RVs, trailers, golf carts, motorcycles, lawn mowers, etc.
- [Widely Applicable] 6-specification inverter cables are commonly used in power applications such as cars, trucks, solar energy, RVs, trailers, golf carts, motorcycles, lawn mowers, etc.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #8
Alpha Rider Shift Shaft Oil Seal 14 X 28 X 7 For Honda For Honda CJ360T CR 250M/125M CT125 XR 185/200/200R CRF230 ATV ATC 185/200
Asin: B07RZKKTKZ | Model: LY110-SEAL-1428-ARLZ4 | PartNumber: LY110-SEAL-1428-ARLZ4
Replaces Oem Part Number：91206-286-013.
Meet Or Exceed Oem Specification..
Fitment : For Honda Cj360t, Cr 250M 125M Ct125 Xr 185/200/200R Crf230 Atv Atc 185/200 (Specific Model And Year Reference Product Description ).
Size：14*28*7 Mm.
Features
- Condition New
- Size 14*28*7 MM
- Replaces OEM Part Number 91206-286-013
- Fitment : For Honda CJ360T, CR 250M 125M CT125 XR 185/200/200R CRF230 ATV ATC 185/200 (Specific model and year reference product description )
- Meet or exceed OEM Specification.
- See more on Amazon...
Brand: Alpha Rider | Manufacturer: Motofans
See On Amazon #9
uxcell Metric Rotary Shaft Oil Seal 12x28x7mm TC Double Lips Rubber, Black
Asin: B011RB5ZFA | Model: a11122600ux0514 | PartNumber: a11122600ux0514 | Ean: 0608641679687 | UPC: 608641679687
Outside Diameter(Approx.) : 28Mm / 1.1";Width(Approx.) : 7Mm / 0.27".
Package Content : 1 X Double Lip Oil Seal.
Color : Black;Weight : 6G.
Material : Polyurethane, Rubber, Steel Spring;Inner Diameter (Approx.) : 12Mm / 0.47".
Features
- Product Name : Double Lip Oil Seal;Model : TC
- Material : Polyurethane, Rubber, Steel Spring;Inner Diameter (Approx.) : 12mm / 0.47
- Outside Diameter(Approx.) : 28mm / 1.1;Width(Approx.) : 7mm / 0.27
- Color : Black;Weight : 6g
- Package Content : 1 x Double Lip Oil Seal
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Oil Seal, TC 28mm x 47mm x 7mm Nitrile Rubber Cover Double Lip with Spring for Bearing Shaft, Black Pack of 1
Asin: B07JQ5PZWM | Model: a18082900ux0191 | PartNumber: a18082900ux0191
[Advantage] - Good Resistance To Many Petroleum Oils, Greases, Hydraulic Fluids, Mineral Oil, And Grease.
[Note] - Please Confirm The Required Size And Material Before Purchase, And Put It In The Right Place.
[Application] - Oil Seals Are Used To Protect Shafts And Bearings From Ingress Of Dirt And Foreign Matter And Egress Of Oil Or Grease.
[Nitrile Rubber] - Standard 70A Nbr With A Temperature Range From -4℉ (-20°C) To 212℉ (100°C).
Features
- [Metric Size] - 47mm Outside Diameter, 28mm Inner Diameter, 7mm Width
- [Nitrile Rubber] - Standard 70A NBR with a temperature range from -4 (-20 C) to 212 (100 C)
- [Advantage] - Good resistance to many petroleum oils, greases, hydraulic fluids, mineral oil, and grease
- [Application] - Oil seals are used to protect shafts and bearings from ingress of dirt and foreign matter and egress of oil or grease
- [NOTE] - Please confirm the required size and material before purchase, and put it in the right place
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 2.36 inches
See On Amazon #11
uxcell Oil Seal 17mm Inner Dia 28mm OD 7mm Thick Fluorine Rubber Double Lip Seals 2Pcs
Asin: B07VYMNVLD | Model: a19062800ux0452 | PartNumber: a19062800ux0452
Functions - It Can Prevent Dust And Impurities Into Inside Of The Machine, And Prevent Lubricating Oil From Leaking.
Working Temperature Range - From -13 Degrees F (-25 Degrees C) To 392 Degrees F (200 Degrees C).
Applications - Oil Seals Are Used To Protect Shafts And Bearings From Ingress Of Dirt And Foreign Matter And Egress Of Oil Or Grease.
Construction - Fluorine Rubber Oil Seal Body, Reinforcing Frame And Self-Tightening Coil Spring, Has Durometer Of 70A.
Features
- Size - 17mm x 28mm x 7mm TC Shaft Oil Seal
- Construction - Fluorine rubber oil seal body, reinforcing frame and self-tightening coil spring, has durometer of 70A
- Functions - It can prevent dust and impurities into inside of the machine, and prevent lubricating oil from leaking
- Applications - Oil seals are used to protect shafts and bearings from ingress of dirt and foreign matter and egress of oil or grease
- Working Temperature Range - From -13 Degrees F (-25 Degrees C) to 392 Degrees F (200 Degrees C)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
EAI Oil Seal 14mm X 28mm X 7mm TC Double Lip w/Spring. Metal Case w/Nitrile Rubber Coating
Asin: B07FVJKKV3 | Model: 100209N | PartNumber: 100209N | Ean: 0712038993253 | UPC: 712038993253
Great Fit: 14Mmx28mmx7mm . The Perfect Double Lip Oil Seal For Automotive, Motorcycle Crankshafts, Differentials, Camshafts, Axle Shafts, Machinery, Water Pumps, Valves, Front And Rear Wheels, And Vehicle Engines. Our Oil Seal Will Fit Perfectly Everywhere You Need It..
Hydrocarbon Fluids: Engineered For The Hydrocarbon Fluids Sealing Environment, This 14X28x7mm Tc Oil Seal Boosts A Good Resistance To Grease, Mineral Oil, Hydraulic Fluids, And Petroleum Oil. What More, This Seal Has Low Swelling In Water, Ensuring Long Term Use..
High-Temperature Resistance: With Its 70A Nitrile Butadiene Rubber Cover Material Design, This Spring Loaded Metric Rotary Shaft Will Withstand Temperatures From -40℉ (-40°C) To 245℉ (120°C).
Seal Off Leakage And Dirt: No More Getting Stressed Up By Spills From Your Rotary Elements! Crafted With Rubber, Garter Spring, And Inner Metal Case, This Metric Nitrile Engine Oil Seal Effectively Prevents The Leakage Of Lubricants And Prevents The Entry Of Dust And Dirt Into Your Precious Machine..
Features
- SUPERIOR QUALITY and DURABILITY: EAI oil seals are engineered with sturdy carbon steel spring and high strength nitrile rubber for reliable and long-lasting performance. This 14mm inner diameter rubber cover seal is lightweight and not easy to age.
- SEAL OFF LEAKAGE and DIRT: No more getting stressed up by spills from your rotary elements! Crafted with rubber, garter spring, and inner metal case, this metric nitrile engine oil seal effectively prevents the leakage of lubricants and prevents the entry of dust and dirt into your precious machine.
- GREAT FIT: 14mmx28mmx7mm . The perfect double lip oil seal for automotive, motorcycle crankshafts, differentials, camshafts, axle shafts, machinery, water pumps, valves, front and rear wheels, and vehicle engines. Our oil seal will fit perfectly everywhere you need it.
- HIGH-TEMPERATURE RESISTANCE: With its 70A Nitrile Butadiene Rubber cover material design, this spring loaded metric rotary shaft will withstand temperatures from -40 (-40 C) to 245 (120 C)
- HYDROCARBON FLUIDS: Engineered for the hydrocarbon fluids sealing environment, this 14x28x7mm TC oil seal boosts a good resistance to grease, mineral oil, hydraulic fluids, and petroleum oil. What more, this seal has low swelling in water, ensuring long term use.
- See more on Amazon...
Brand: EAI | Manufacturer: EAI Parts
See On Amazon #13
National 4528N Man Trans Output Shaft Seal
Asin: B000C5J0UY | Model: 4528N | PartNumber: 4528N | Ean: 0724956132485 | UPC: 724956132485
Resistance To Ep Lubricants.
High Resistance To Oxidation And Ozone, And Has Low Swell In Hydrocarbon Fluids.
Design Type: Spring Loaded; Multi-Lip.
Temperature Range: Minus 20 Degree Fahrenheit To 300 Degree Fahrenheit.
Delivers Quality And Reliable Performance For Every Type Of Repair.
Material: Polyacrylate.
Low Swell In Hydrocarbon Fluids.
Compatible With Most Oils And Ep Lubricants At Higher Operating Temperatures.
Temperature Range: -20°F To 300°F / -29°C To 49°C.
Features
- Design type: spring loaded; multi-lip
- Temperature range: -20 F to 300 F / -29 C to 49 C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
- Material: Polyacrylate
- Design type: Spring loaded; multi-lip
- Temperature range: Minus 20 degree Fahrenheit to 300 degree Fahrenheit
- Compatible with most oils and EP lubricants at higher operating temperatures
- High resistance to oxidation and ozone, and has low swell in hydrocarbon fluids
- See more on Amazon...
First Available: 09/16/2013
Brand: National | Manufacturer: National
Dimensions: 3.25 x 3.25 x 1.13 Inches | Weight: 0.08 Pounds
See On Amazon #14
National 710714 Man Trans Shift Shaft Seal
Asin: B073Q6DGRB | Model: 710714 | PartNumber: 710714 | Ean: 0019826202581 | UPC: 019826202581
Good Low Temperature Capability.
Delivers Quality And Reliable Performance For Every Type Of Repair.
Low Swell In Hydrocarbon Fluids.
Temperature Range: -40°F To 225°F / -40°C To 107°C.
Features
- Design type: spring loaded; multi-lip
- Temperature range: -40 F to 225 F / -40 C to 107 C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
- See more on Amazon...
Brand: National | Manufacturer: National
Dimensions: 0.10 x 2.00 x 0.63 inches | Weight: 0.02 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #15
Honda 91202-965-003 - Oil Seal (14x28x7)
Asin: B00I87GL3W
Brand: Honda | Manufacturer: HONDA
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #16
EAI Oil Seal 17mm X 28mm X 7mm TC Double Lip w/Spring. Metal Case w/Nitrile Rubber Coating
Asin: B08DQRJ6RZ | Model: TC17*28*7 | PartNumber: TC17*28*7 | Ean: 0646437903905 | UPC: 646437903905
Brand: EAI | Manufacturer: EAI Parts
See On Amazon #17
EAI Oil Seal 14mm x 28mm x 4mm TC Double Lip w/Spring. Metal Case w/Nitrile Rubber Coating
Asin: B09TS1T3JF | Model: TC14*28*4 | PartNumber: TC14*28*4
Great Fit: 14Mmx28mmx4mm Size. The Perfect Double Lip Oil Seal For Automotive, Motorcycle Crankshafts, Differentials, Camshafts, Axle Shafts, Machinery, Water Pumps, Valves, Front And Rear Wheels, And Vehicle Engines. Our Oil Seal Will Fit Perfectly Everywhere You Need It..
Hydrocarbon Fluids: Engineered For The Hydrocarbon Fluids Sealing Environment, This 14X28x4mm Tc Oil Seal Boosts A Good Resistance To Grease, Mineral Oil, Hydraulic Fluids, And Petroleum Oil. What More, This Seal Has Low Swelling In Water, Ensuring Long Term Use..
High-Temperature Resistance: With Its 70A Nitrile Butadiene Rubber Cover Material Design, This Spring Loaded Metric Rotary Shaft Will Withstand Temperatures From -40℉ To 226℉.
Seal Off Leakage And Dirt: No More Getting Stressed Up By Spills From Your Rotary Elements! Crafted With Rubber, Garter Spring, And Inner Metal Case, This Metric Nitrile Oil Seal Effectively Prevents The Leakage Of Lubricants And Prevents The Entry Of Dust And Dirt Into Your Precious Machine..
Features
- !!SAME BUSINESS DAY SHIPPING!! SUPERIOR QUALITY and DURABILITY: EAI oil seals are engineered with sturdy carbon steel spring and high strength nitrile rubber for reliable and long-lasting performance. This 14mm ID rubber cover seal is lightweight and not easy to age.
- SEAL OFF LEAKAGE and DIRT: No more getting stressed up by spills from your rotary elements! Crafted with rubber, garter spring, and inner metal case, this metric nitrile oil seal effectively prevents the leakage of lubricants and prevents the entry of dust and dirt into your precious machine.
- GREAT FIT: 14mmx28mmx4mm size. The perfect double lip oil seal for automotive, motorcycle crankshafts, differentials, camshafts, axle shafts, machinery, water pumps, valves, front and rear wheels, and vehicle engines. Our oil seal will fit perfectly everywhere you need it.
- HIGH-TEMPERATURE RESISTANCE: With its 70A Nitrile Butadiene Rubber cover material design, this spring loaded metric rotary shaft will withstand temperatures from -40 to 226
- HYDROCARBON FLUIDS: Engineered for the hydrocarbon fluids sealing environment, this 14x28x4mm TC oil seal boosts a good resistance to grease, mineral oil, hydraulic fluids, and petroleum oil. What more, this seal has low swelling in water, ensuring long term use.
- See more on Amazon...
Brand: EAI | Manufacturer: EAI Parts
See On Amazon #18
Rotary Shaft TC Oil Seal 14x24x7 NBR Double Lip with Garter Spring [Set of 2]
Asin: B087YQ3Z63 | Ean: 0842915196597 | UPC: 842915196597
Outside Diameter(Mm): 24.
Material: Nbr.
Width(Mm): 7.
Inside Diameter(Mm): 14.
Features
- Design Code: TC Type
- Inside Diameter(mm): 14
- Outside Diameter(mm): 24
- Width(mm): 7
- Material: NBR
- See more on Amazon...
Brand: Terache | Manufacturer: Terache
Dimensions: 0.95 x 0.95 x 0.28 inches | Weight: 0.10 Pounds
See On Amazon #19
XiKe Oil Shaft Seal, Lip Seals, TC 28x50x7mm Nitrile Rubber Cover Double Lip with Spring, Oil Seals for Bearing Shafts,Rotating Shafts,etc., Black Pack of 2
Asin: B0CH11ST43 | Ean: 0050811634499 | UPC: 050811634499
✔Advantage-Grease Is Included For Easy Installation, Reducing Friction And Extending Operating Life..
✔Warranty - Six Months Warranty, Free Refund If There Is Any Quality Problem During The Warranty Period..
✔Performance-It Can Be Used To Protect Shafts And Bearings From Dirt And Foreign Matter And Grease Seepage, And Has Good Resistance To A Variety Of Mineral Oils,Petroleum Oils, Hydraulic Oils And Lubricating Greases..
✔Material-Made From Nitrile Rubber Standardized To 70A Nbr With A Temperature Range Of -4°F (-20°C) To 212°F (333°C)..
Features
- SIZE-Metric 28mm Inner Diameter, 50mm Outside Diameter, 7mm Width.
- Material-Made from Nitrile rubber standardized to 70A NBR with a temperature range of -4 F (-20 C) to 212 F (333 C).
- Advantage-Grease is included for easy installation, reducing friction and extending operating life.
- Performance-It can be used to protect shafts and bearings from dirt and foreign matter and grease seepage, and has good resistance to a variety of mineral oils,petroleum oils, hydraulic oils and lubricating greases.
- Warranty - Six months warranty, free refund if there is any quality problem during the warranty period.
- See more on Amazon...
Brand: XIKE | Manufacturer: XiKe
Dimensions: 0.28 x 1.97 x 1.97 inches | Weight: 0.03 Kilograms
See On Amazon
Looking For Something Else?
Search