Total Boat TotalBoat 5:1 Epoxy Resin Kit (4.5 Gallons, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair, Clear
Asin: B06XGY533M | Ean: 0811932023186 | UPC: 811932023186
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75°F For Fast Hardener, To 20 Minutes @ 75°F For Slow Hardener.
Pumps Included: Metered Resin And Hardener Pumps Provide The Exact 5 Parts Resin To 1 Part Hardener Ratio For A Proper Cure Every Time. Easy-To-Use Pumps Are Calibrated So All You Do Is Mix One Full Pump Of Hardener To Every One Full Pump Of Resin.
Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin, Hardener, And Calibrated Pumps. Compatible With Other 5:1 Epoxy Resin Systems.
Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating. Combine With Fillers To Make A High-Strength Fairing Compound, Filleting Material, Or Adhesive.
Features
- PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair projects. For use on wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel, and lead. Not suitable for clear-coating applications
- IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating. Combine with fillers to make a high-strength fairing compound, filleting material, or adhesive
- CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75 F for Fast Hardener, to 20 minutes @ 75 F for Slow Hardener
- CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, and calibrated pumps. Compatible with other 5:1 epoxy resin systems
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon Similar To Total Boat TotalBoat 51 Epoxy
#1
TotalBoat Table Top Epoxy Resin 1 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
Asin: B00S9QJIY6 | Model: TB-9335 | PartNumber: TB-9335 | Ean: 0811932021441, 0811932020765 | UPC: 811932020765, 811932021441
2 Part Epoxy Is Easy To Use: Just Mix 1 Part Resin To 1 Part Hardener, Stir Thoroughly, And Pour On Your Prepared Surface; The Epoxy Will Level On Its Own And Cure At Room Temperature; Maximum Pour Depth Per Layer Is 1/8" - 1/4".
1 Gallon Epoxy Kit Includes 1/2 Gallon Of Resin & 1/2 Gallon Of Hardener; Application Temperature: 70-80°F; Working Time: 20 Min. @ 70°F; Recoat Time: 4-8 Hrs; Cure Time: 16-20 Hrs @ 70°F; Coverage: 12.8 Sq Ft At 1/8" Thick; Store At 60-90°F.
No Vocs, Low Odor, Bpa-Free: No Harsh Fumes - Ideal For Indoor Or Shop Use With Adequate Ventilation And Proper Ppe; All Ingredients In This Food Safe Epoxy Resin Are On The Usda Approved List For Contact With Food, Once Cured; 100% Made In The Usa.
Epoxy Resists Scratches, Stains And Yellowing: Self-Leveling Formula Cures To A Finish As Smooth As Glass; Use This Versatile Diy Resin On Wood, Concrete, Ceramic, Stainless Steel And More; 100% Waterproof Upon Cure.
Features
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8 - 1/4
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 1 GALLON EPOXY KIT includes 1/2 gallon of resin & 1/2 gallon of hardener; application temperature: 70-80 F; working time: 20 min. @ 70 F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70 F; coverage: 12.8 sq ft at 1/8 thick; store at 60-90 F
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 10.00 x 7.00 x 5.00 inches | Weight: 9.30 Pounds
See On Amazon #2
TotalBoat Table Top Epoxy Resin 2 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
Asin: B07PYVYXNL | Model: 519708 | PartNumber: 519708 | Ean: 0811932024299 | UPC: 811932024299
2 Part Epoxy Is Easy To Use: Just Mix 1 Part Resin To 1 Part Hardener, Stir Thoroughly, And Pour On Your Prepared Surface; The Epoxy Will Level On Its Own And Cure At Room Temperature; Maximum Pour Depth Per Layer Is 1/8" - 1/4".
2 Gallon Epoxy Kit Includes 1 Gallon Of Resin & 1 Gallon Of Hardener; Application Temperature: 70-80°F; Working Time: 20 Min. @ 70°F; Recoat Time: 4-8 Hrs; Cure Time: 16-20 Hrs @ 70°F; Coverage: 12.8 Sq Ft Per Gallon At 1/8" Thick; Store At 60-90°F.
No Vocs, Low Odor, Bpa-Free: No Harsh Fumes - Ideal For Indoor Or Shop Use With Adequate Ventilation And Proper Ppe; All Ingredients In This Food Safe Epoxy Resin Are On The Usda Approved List For Contact With Food, Once Cured; 100% Made In The Usa.
Epoxy Resists Scratches, Stains And Yellowing: Self-Leveling Formula Cures To A Finish As Smooth As Glass; Use This Versatile Diy Resin On Wood, Concrete, Ceramic, Stainless Steel And More; 100% Waterproof Upon Cure.
Features
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8 - 1/4
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 2 GALLON EPOXY KIT includes 1 gallon of resin & 1 gallon of hardener; application temperature: 70-80 F; working time: 20 min. @ 70 F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70 F; coverage: 12.8 sq ft per gallon at 1/8 thick; store at 60-90 F
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 6.00 Pounds
See On Amazon #3
TotalBoat-382660 - Thixo (185ml Cartridge) | Thickened Epoxy Adhesive | for Bonding, Gluing, Sealing and Filling | Use on Wood, Fiberglass, Metals, Brick, Stone, Glass, Tile & More
Asin: B00HRG875K | Ean: 0811932020291 | UPC: 811932020291
Thickened Epoxy Wont Sag: Unique Viscosity Is Perfect For Working Overhead Or On Vertical Surfaces. It Stays Where You Apply It. However, Thixo Is Still Thin Enough To Wet Out Fiberglass.
Wide Range Of Applications: Use On Wood, Fiberglass, Metals, Brick, Concrete, Glass, Slate, Tile, Stone And More. Thixo Is Used By Marine Trade Professionals, Construction Industry, Homeowners, And Diy Makers For Projects Ranging From Boat Building & Repair To Furniture Builds And Home Renovation.
Long Working Time Lets You Work At Your Pace: At 77°F, Thixo Gives You A Generous 50 Minutes Of Working Time. The Short 30-35 Minute Gel Time Means That Once You Apply It, It Sets Up Fast And Cures Fully In 24 Hours.
No Mixing, Mess, Or Waste: No Need To Mix Resin And Hardener. Included Mixing Tips Automatically Ensure Perfect 2:1 Mix Ratio Every Time. Convenient 185 Ml Cartridge Fits All Standard Caulking Guns. Each Cartridge Includes 2 Tips.
Features
- HIGH STRENGTH 2-PART THICKENED EPOXY ADHESIVE: For structural bonding, gluing, filling, and sealing projects. Cured epoxy can be drilled, sanded and painted, and is 100% waterproof
- NO MIXING, MESS, OR WASTE: No need to mix resin and hardener. Included mixing tips automatically ensure perfect 2:1 mix ratio every time. Convenient 185 ml cartridge fits all standard caulking guns. Each cartridge includes 2 tips
- THICKENED EPOXY WONT SAG: Unique viscosity is perfect for working overhead or on vertical surfaces. It stays where you apply it. However, Thixo is still thin enough to wet out fiberglass
- LONG WORKING TIME LETS YOU WORK AT YOUR PACE: At 77 F, Thixo gives you a generous 50 minutes of working time. The short 30-35 minute gel time means that once you apply it, it sets up fast and cures fully in 24 hours
- WIDE RANGE OF APPLICATIONS: Use on wood, fiberglass, metals, brick, concrete, glass, slate, tile, stone and more. Thixo is used by marine trade professionals, construction industry, homeowners, and DIY makers for projects ranging from boat building & repair to furniture builds and home renovation
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 1.00 pounds
See On Amazon #4
TotalBoat-409336 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit)
Asin: B00LLL9FU8 | Model: 409336 | PartNumber: 409336 | Ean: 0811932021083 | UPC: 811932021083
Easy To Mix And Apply: Foolproof 1 To 1 Mix Ratio - Just Mix The Blue And Yellow Components Until They Turn Green. Creamy Smooth Consistency Makes It Easy To Spread And Feather To A Fine Edge; Won't Sag On Vertical And Overhead Surfaces.
Choose Kit Size: 2-Pint Kit, 2-Quart Kit Or 1-Gallon Kit. Note: Totalboat Gelcoat Should Not Be Applied Directly Over Totalfair Or Gelcoat Will Not Cure Properly. Before Applying Gelcoat, Apply Totalboat 2-Part Epoxy Primer Or Totalprotect Over Totalfair.
Cures Fast. Easy To Sand And Paint: Quick-Drying Compound Is Ready To Sand In Just 3 Hours At 80°F; Cured Fairing Compound Sands Easily; Compatible With Latex And Epoxy Primers And Paints.
Super Smooth Finish For Permanent, Waterproof Repairs: Marine Filler Bonds Strongly To Damaged Areas And Cures Without Pinholes On Wood, Aluminum, Steel And Fiberglass Repair Areas; Cured Totalfair Is Waterproof; Use Above And Below The Waterline.
Features
- HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
- SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
- EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
- CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80 F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
- CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 1.00 Pounds
See On Amazon #5
Brampton Marine Epoxy Strong Bonding for Boat Repair - Bonds in 30 Minutes, Water Resistant, 4 Ounces
Asin: B0774TSHPJ | Model: 4 Ounce | PartNumber: 4 Ounce | Ean: 0853235006282 | UPC: 853235006282
A Weather-Resistant Adhesive: Marine Grade Epoxy From Brampton Technology Creates An All-Weather Bond Perfect For All Kinds Of Outdoor Repairs. This Alternative To Superglues And Other Epoxies Can Withstand Extreme Conditions Of Heat, Cold, And Humidity..
Easy Squeeze Bottles Included With 4Oz, 16Oz And 32Oz Kits / Easy Dispense Double Barrel Cartridge With .85Oz: Mix Ratio 1:1 By Volume. No Tools Needed..
Ready In Just 30 Minutes: Sets The Bond In 15 Minutes. Cures In 30 Minutes At Room Temperature..
Effective For Boat Repair: Brampton Marine Grade Epoxy Is Perfect For Boats, Jet Skis, Surfboards, And More. It Is Resistant To Petroleum, Solvents, And Other Chemicals. Works On A Variety Of Materials Including Galvanized Steel, Fiberglass, Graphite, Pvc And More..
Features
- CAN BE APPLIED UNDERWATER: Unlike many conventional epoxies, Brampton Marine Grade Epoxy can form and maintain bonds underwater. Bonds when fully immersed in both fresh and saltwater. It has excellent tensile strength and impact resistance
- EFFECTIVE FOR BOAT REPAIR: Brampton Marine Grade Epoxy is perfect for boats, jet skis, surfboards, and more. It is resistant to petroleum, solvents, and other chemicals. Works on a variety of materials including galvanized steel, fiberglass, graphite, PVC and more.
- A WEATHER-RESISTANT ADHESIVE: Marine Grade epoxy from Brampton Technology creates an all-weather bond perfect for all kinds of outdoor repairs. This alternative to superglues and other epoxies can withstand extreme conditions of heat, cold, and humidity.
- READY IN JUST 30 MINUTES: Sets the bond in 15 minutes. Cures in 30 minutes at room temperature.
- EASY SQUEEZE BOTTLES INCLUDED with 4oz, 16oz and 32oz kits / EASY DISPENSE DOUBLE BARREL CARTRIDGE with .85oz: Mix ratio 1:1 by volume. No tools needed.
- See more on Amazon...
Brand: BRAMPTON TECHNOLOGY, LTD. | Manufacturer: Brampton Technology
Weight: 0.35 Pounds
See On Amazon #6
TotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair (Gallon Kit)
Asin: B07BR5VNH1 | Ean: 0811932023704 | UPC: 811932023704
Easy To Mix, Easy To Apply: For A 100G Mass, Catalyze With 1% Mekp To Get 15-20 Min. Of Working Time At 70°F (14 Drops Of Mekp Per Ounce Of Putty); Adjust Amount Of Catalyst To Control Working Time; Paste-Like Consistency Is Easy To Spread And Won’T Sag.
Available In Quart And Gallon Kits: Includes 2 Oz. Mekp. This Versatile Bonding Compound Can Bond Dissimilar Materials And Can Also Be Used In Many Home, Auto, Construction, And Aerospace Applications, With No Shrinking Or Cracking, Even In Bulk Fillings.
Fast-Setting Structural Adhesive Is Ideal For Fiberglass & Gelcoat Repair; For Cosmetic Fairing, Overcoat Polyester Structural Repair Putty With Totalboat Polyester Fairing Compound; It Sands Smooth Easily & Can Be Finished With Totalboat Gelcoat With Wax.
Marine Filler Has Premium Polyester Resin And Long Strand Glass Fibers For Strength, Impact Resistance & Elasticity; Ideal For Bonding Decks, Stringers & Liners To Hulls; Filleting And Bonding Bulkheads, And Filling Screw Holes, Bolt Holes, Chips & Dents.
Features
- PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline
- MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents
- EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70 F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won t sag
- FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax
- AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #7
TotalBoat ThickSet Deep Pour Epoxy Resin Kit (1.3 Gallon) - Crystal Clear Thick Pour Resin for Art, Casting, Epoxy River Tables, Live Edge Slabs, Molds, Wood
Asin: B07QKF5F6F | Ean: 0811932024374 | UPC: 811932024374
Pour Epoxy Up To 1" Thick Per Single Layer: Pour Single Layers Of Resin Up To 1/2″ Thick For Larger Casting Applications Such As Slab And River Table Pours, And Up To 1" Thick For Smaller Molds; For Even Deeper Pours Per Layer, Try Total Boat Thickset Fathom (Sold Separately).
Low Voc, Low Odor Resin Is Available In Four Sizes: 1.3 Quart Kit (1 Qt Resin, 1/3 Qt Hardener), 1.3 Gallon Kit (1 Gal Resin, 1/3 Gal Hardener), 4 Gallon Kit (3 Gal Resin, 1 Gal Hardener) And 8 Gallon Kit (6 Gal Resin, 2 Gal Hardener); 100% Made In The Usa.
Easy To Use, Easy To Tint: Simple Mix Ratio Of 3 Parts Epoxy Resin To 1 Part Hardener, And Long Working Time Make It Easy To Use; To Add Interest, Tint Mixed Liquid Epoxy With Mica Powder, Universal Tints, Alcohol Ink Pigments And Other Epoxy-Safe Colorants.
Crystal Clear Epoxy Resin Self-Levels To Creates A High-Gloss, Glass-Like Finish On Prepared Wood, Concrete, Stone, Ceramic And Metal Surfaces; Great For Deep Casting And Molding Projects To Create Unique Sculptures, Figurines, Jewelry And More.
Features
- DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling deep voids in wood; waterproof resin cures without shrinkage, cracking or yellowing
- CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces; great for deep casting and molding projects to create unique sculptures, figurines, jewelry and more
- POUR EPOXY UP TO 1 THICK PER SINGLE LAYER: Pour single layers of resin up to 1/2 thick for larger casting applications such as slab and river table pours, and up to 1 thick for smaller molds; for even deeper pours per layer, try Total Boat ThickSet Fathom (sold separately)
- EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and long working time make it easy to use; to add interest, tint mixed liquid epoxy with mica powder, universal tints, alcohol ink pigments and other epoxy-safe colorants
- LOW VOC, LOW ODOR RESIN IS AVAILABLE IN FOUR SIZES: 1.3 Quart Kit (1 qt resin, 1/3 qt hardener), 1.3 Gallon Kit (1 gal resin, 1/3 gal hardener), 4 Gallon Kit (3 gal resin, 1 gal hardener) and 8 Gallon Kit (6 gal resin, 2 gal hardener); 100% made in the USA
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 12.85 pounds
See On Amazon #8
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (White), 1 Gallon (Pack of 1)
Asin: B00HS4YZB6 | Model: 365404 | PartNumber: 365404 | Ean: 0811932020321 | UPC: 811932020321
Easy To Apply By Brushing, Rolling Or Spraying: Use A Natural Bristle Paint Brush, A 1/8 " Solvent-Safe Foam Roller, Or To Spray, Use A 1.1Mm Tip; Wear Proper Personal Protection; Work In A Well-Ventilated Area; Boat Primer Is Chromate-Free And Lead-Free.
Available In White And Gray In Quart And Gallon Sizes. Brush/Roller Application - Thin With Totalboat Special Brushing Thinner 100; Spray Application - Thin With Xylene; Do Not Apply Topside Primer Thicker Than Recommended Or It May Not Cure Properly.
Dries Fast, Cures To A Smooth, Hard Finish: Ready To Sand In 60-90 Minutes At 65°F; Marine Paint Primer Is Easy To Sand, Then Just Wipe Clean And Apply A Topside Finish Such As Totalboat Wet Edge Or Totaltread Marine Non-Skid Deck Paint.
Covers Completely In Just One Coat: High-Solids Primer Seals The Surface With 1 Thin Coat; Apply A Second Coat Only If A Higher Build Is Needed; To Fill Large Surface Imperfections Use Totalboat Totalfair Epoxy Fairing Compound Before Applying Topside Primer.
Features
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65 F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 100.00 Kilograms
See On Amazon #9
TotalBoat 5:1 Epoxy Resin Kit (Gallon, Fast Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair
Asin: B00HR85152 | Model: 365247 | PartNumber: 365247 | Ean: 0811932021007 | UPC: 811932021007
Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75°F For Fast Hardener, To 20 Minutes @ 75°F For Slow Hardener.
Pumps Included: Metered Resin And Hardener Pumps Provide The Exact 5 Parts Resin To 1 Part Hardener Ratio For A Proper Cure Every Time. Easy-To-Use Pumps Are Calibrated So All You Do Is Mix One Full Pump Of Hardener To Every One Full Pump Of Resin.
Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin, Hardener, And Calibrated Pumps. Compatible With Other 5:1 Epoxy Resin Systems.
Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating. Combine With Fillers To Make A High-Strength Fairing Compound, Filleting Material, Or Adhesive.
Features
- PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair projects. For use on wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel, and lead. Not suitable for clear-coating applications
- IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating. Combine with fillers to make a high-strength fairing compound, filleting material, or adhesive
- CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75 F for Fast Hardener, to 20 minutes @ 75 F for Slow Hardener
- CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, and calibrated pumps. Compatible with other 5:1 epoxy resin systems
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #10
TotalBoat Polyester Finishing Resin (Gallon)
Asin: B00PZ1CUCU | Ean: 0811932021304, 0811932022936 | UPC: 811932022936, 811932021304
Versatile Polyester Resin Is Easy Is To Mix With Mekp Catalyst And Apply By Brush Or Plastic Spreader To Prepared Fiberglass, Wood, Metal, And Composites.
Choose Quart Or Gallon Size. Includes Mekp Hardener. Note: You Can Even Tint Polyester Fiberglass Resin With Opaque Pigment Dispersions. If Tinting, Mix Pigment In Thoroughly Before Adding Mekp.
Durable, Hard Finish Resists Scratches And Staining. For A Glossy Appearance, The Cured Surface Can Be Wet Sanded And Buffed To A High Shine.
Easy To Use, Preferred By Pros For Building And Repairs: Medium Viscosity Resin Spreads Evenly, Wets Out Fiberglass Easily, Won't Sag On Vertical Surfaces & Prevents Patter Print-Through On Gelcoat. Ideal For Boat Building, Repairs, And Surfboards.
Features
- MARINE GRADE FINISHING RESIN contains wax so it dries to a tack-free surface ready for sanding, paint, or gel coat application. Used in fiberglass layups as the final coat over sticky polyester laminating resin
- EASY TO USE, PREFERRED BY PROS FOR BUILDING AND REPAIRS: Medium viscosity resin spreads evenly, wets out fiberglass easily, won't sag on vertical surfaces & prevents patter print-through on gelcoat. Ideal for boat building, repairs, and surfboards
- VERSATILE POLYESTER RESIN is easy is to mix with MEKP catalyst and apply by brush or plastic spreader to prepared fiberglass, wood, metal, and composites
- DURABLE, HARD FINISH resists scratches and staining. For a glossy appearance, the cured surface can be wet sanded and buffed to a high shine
- CHOOSE QUART OR GALLON SIZE. Includes MEKP hardener. NOTE: You can even tint polyester fiberglass resin with opaque Pigment Dispersions. If tinting, mix pigment in thoroughly before adding MEKP
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #11
TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart), Clear, 32 Fl Oz (Pack of 1)
Asin: B087RW6VLW | Model: 520415 | PartNumber: 520415 | Ean: 0811932024671 | UPC: 811932024671
Ideal Surface Prep Solvent Wipe For Rubberized Inflatable Materials Prior To Applying Totalboat Inflatable Boat Paint.
Available In Quart Size. 100% Made In The Usa. Use Only With The Totalboat Products Specified.
Makes It Easy To Remove Paint From Tools And Equipment After Painting Is Done.
Perfect For Brush, Roller, Or Spray Applications.
Features
- Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy Primer systems.
- Perfect for brush, roller, or spray applications
- Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint
- Makes it easy to remove paint from tools and equipment after painting is done
- Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #12
TotalBoat - 405721 Thixo Fast Cure 2:1 Epoxy System
Asin: B00X6AM06I | Model: TB-THIXO-FC | PartNumber: TB-THIXO-FC | Ean: 0811932020901 | UPC: 811932020901
Dispenses Perfectly Mixed Epoxy Every Time Via Innovative Mixing Tips (2 Included Per Tube).
185 Ml Cartridge Fits Standard Caulk Guns.
Cures 3 Times Faster Than Thixo Or Other Thixotropic Epoxy Adhesives On The Market.
Excellent Adhesive For Wood, Metal, Or Fiberglass.
Features
- Powerful, fast curing 2:1 thickened epoxy adhesive
- Excellent adhesive for wood, metal, or fiberglass
- Dispenses perfectly mixed epoxy every time via innovative mixing tips (2 included per tube)
- Cures 3 times faster than Thixo or other thixotropic epoxy adhesives on the market
- 185 Ml cartridge fits standard caulk guns
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #13
TotalBoat-439901 TotalProtect Epoxy Barrier Coat System (White, Gallon), 1 Gallon (Pack of 1)
Asin: B00ULR2UV4 | Model: 439901 | PartNumber: 439901 | Ean: 0811932021557 | UPC: 811932021557
Provides Superior Protection On All Underwater Metals.
Available In White Or Gray In Quart Or Gallon Sizes. Coverage: 225 Sq. Ft. Per Gallon (At 7 Mils Wet). Thinner: Totalboat Epoxy Primer Thinner 200..
Easy To Mix And Apply By Roller Or Spray. No Sanding Required. Fast Drying Primer Creates A Flexible, Durable Epoxy Barrier Coat..
Excellent For Gelcoat Blister Prevention And Repair Work On Fiberglass Boats.
Features
- High-build two part epoxy primer and barrier coat for use above and below the waterline
- Excellent for gelcoat blister prevention and repair work on fiberglass boats
- Provides superior protection on all underwater metals
- Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.
- Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200.
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #14
TotalBoat-510825 High Performance Epoxy Kit, Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair (Gallon, Medium)
Asin: B06XH2Q869 | Model: 510825 | PartNumber: 510825 | Ean: 0811932023155 | UPC: 811932023155
Choose Slow, Medium, Or Fast Hardener To Control Working Properties And Cure Times. Slow Hardener Has The Longest Working And Cure Times. Medium Hardener Is Ideal For Most Applications. Fast Hardener Has The Shortest Working Time And Fastest Cure.
Pumps Included: Metered Resin And Hardener Pumps Provide The Exact 2 Parts Resin To 1 Part Hardener Ratio For A Proper Cure Every Time; Easy-To-Use Pumps Are Calibrated So All You Do Is Mix One Full Pump Of Hardener To Every One Full Pump Of Resin.
Choose Epoxy Kit Size: Pint, Quart, Gallon Or 2 Gallon. All Totalboat Epoxy Kits Come With Calibrated Pumps. Compatible With Epoxy Thickeners, Fillers And Coloring Agents.
Non-Blushing Epoxy System Means No Time-Consuming Washdowns To Remove Surface Blush Between Coats, So Projects Get Finished Faster. Low Odor And Low Vocs Make It Great For Shop Or Indoor Use. Cured Surface Is Bpa-Free, Safer For Potential Food Contact.
Features
- EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener
- NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact
- CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure
- CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps. Compatible with epoxy thickeners, fillers and coloring agents
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time; easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #15
TotalBoat Seal Marine Sealant 10 Ounce
Asin: B00LLKGRBE | Ean: 0811932021144 | UPC: 811932021144
Ideal For Bedding Hardware, Windshields, And Porthole.
White In Color.
10 Ounce Cartridge Fits Standard Caulk Guns.
Cures In Temperatures From -20°F To +120°F. Can Be Wet Sanded And Painted After Curing..
Features
- Fast curing elastomeric marine sealant used to seal ports, bed hardware, and stops leaks.
- Cures in temperatures from -20 F to +120 F. Can be wet sanded and painted after curing.
- Ideal for bedding hardware, windshields, and porthole
- 10 ounce cartridge fits standard caulk guns
- White in color
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Weight: 0.63 Pounds
See On Amazon #16
TotalBoat TotalTread Non Skid Deck Paint (Beige, Gallon) | Marine-Grade Anti Slip Traction Coating
Asin: B01DL4IK7G | Model: TB-TREADBG | PartNumber: TB-TREADBG | Ean: 0811932021748 | UPC: 811932021748
Versatile Coating With Many Applications: Use On Boat Decks, Floors, Cabins, Hatches, Stairs, Steps, Gunwales, Swim Platforms, Docks And Anywhere You Need Sure Footing.
Colors To Match Topsides Or Existing Non Skid Patterns: Available In Quart And Gallon Sizes. Colors: Sand Beige, Gray, White..
Easy To Apply: Apply By Brush Or Roller On Fiberglass, Wood, And Previously Painted Surfaces. Add A Second Coat For Greater Traction. Coverage: 250-300 Sq. Ft. Per Gallon..
Long-Lasting Finish: Uv-Stable Formula Won't Fade, Crack, Or Peel. Easy To Clean: Scrubbing Won't Wear Away The Finish And Innovative Wax Traction Spheres Won't Fall Out.
Features
- UNIQUE FORMULA: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that's less abrasive than traditional silica additives
- LONG-LASTING FINISH: UV-stable formula won't fade, crack, or peel. Easy to clean: Scrubbing won't wear away the finish and innovative wax traction spheres won't fall out
- VERSATILE COATING WITH MANY APPLICATIONS: Use on boat decks, floors, cabins, hatches, stairs, steps, gunwales, swim platforms, docks and anywhere you need sure footing
- EASY TO APPLY: Apply by brush or roller on fiberglass, wood, and previously painted surfaces. Add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
- COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Available in Quart and Gallon sizes. Colors: Sand Beige, Gray, White.
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 7.50 x 6.50 x 6.50 inches | Weight: 11.50 Pounds
See On Amazon #17
TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray) 128 Fl Oz (Pack of 1)
Asin: B06X3RZRHB | Model: 497402 | PartNumber: 497402 | Ean: 0811932022769 | UPC: 811932022769
Fast Drying, With No Sanding Needed Between Coats.
Available In Gray In Quart Or Gallon Size Kits. Coverage: Approximately 225 Sq. Ft./Gallon @ 7 Mils Wet. Thinner: Totalboat Epoxy Primer Thinner 200.
For Use Above And Below The Waterline.
Provides Superior Corrosion Protection On All Underwater Metals.
Features
- High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with bottom paints or other 1- and 2-part paints
- Provides superior corrosion protection on all underwater metals
- Fast drying, with no sanding needed between coats
- For use above and below the waterline
- Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
See On Amazon #18
TotalBoat Table Top Epoxy Resin 2 Quart Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
Asin: B00S9R8E8Q | Model: TB-9334 | PartNumber: TB-9334 | Ean: 0811932020758 | UPC: 811932020758
2 Part Epoxy Is Easy To Use: Just Mix 1 Part Resin To 1 Part Hardener, Stir Thoroughly, And Pour On Your Prepared Surface; The Epoxy Will Level On Its Own And Cure At Room Temperature; Maximum Pour Depth Per Layer Is 1/8" - 1/4".
2 Quart Epoxy Kit Includes 1 Quart Of Resin & 1 Quart Of Hardener; Application Temperature: 70-80°F; Working Time: 20 Min. @ 70°F; Recoat Time: 4-8 Hrs; Cure Time: 16-20 Hrs @ 70°F; Coverage: 6.4 Sq Ft At 1/8" Thick; Store At 60-90°F.
No Vocs, Low Odor, Bpa-Free: No Harsh Fumes - Ideal For Indoor Or Shop Use With Adequate Ventilation And Proper Ppe; All Ingredients In This Food Safe Epoxy Resin Are On The Usda Approved List For Contact With Food, Once Cured; 100% Made In The Usa.
Epoxy Resists Scratches, Stains And Yellowing: Self-Leveling Formula Cures To A Finish As Smooth As Glass; Use This Versatile Diy Resin On Wood, Concrete, Ceramic, Stainless Steel And More; 100% Waterproof Upon Cure.
Features
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8 - 1/4
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 2 QUART EPOXY KIT includes 1 quart of resin & 1 quart of hardener; application temperature: 70-80 F; working time: 20 min. @ 70 F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70 F; coverage: 6.4 sq ft at 1/8 thick; store at 60-90 F
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 4.50 x 7.50 x 5.10 Inches | Weight: 4.80 pounds
See On Amazon #19
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray), 1 Gallon (Pack of 1)
Asin: B00HS4YY9Y | Model: 365403 | PartNumber: 365403 | Ean: 0811932020307 | UPC: 811932020307
Easy To Apply By Brushing, Rolling Or Spraying: Use A Natural Bristle Paint Brush, A 1/8 " Solvent-Safe Foam Roller, Or To Spray, Use A 1.1Mm Tip; Wear Proper Personal Protection; Work In A Well-Ventilated Area; Boat Primer Is Chromate-Free And Lead-Free.
Available In White And Gray In Quart And Gallon Sizes. Brush/Roller Application - Thin With Totalboat Special Brushing Thinner 100; Spray Application - Thin With Xylene; Do Not Apply Topside Primer Thicker Than Recommended Or It May Not Cure Properly.
Dries Fast, Cures To A Smooth, Hard Finish: Ready To Sand In 60-90 Minutes At 65°F; Marine Paint Primer Is Easy To Sand, Then Just Wipe Clean And Apply A Topside Finish Such As Totalboat Wet Edge Or Totaltread Marine Non-Skid Deck Paint.
Covers Completely In Just One Coat: High-Solids Primer Seals The Surface With 1 Thin Coat; Apply A Second Coat Only If A Higher Build Is Needed; To Fill Large Surface Imperfections Use Totalboat Totalfair Epoxy Fairing Compound Before Applying Topside Primer.
Features
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65 F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly
- See more on Amazon...
Brand: TotalBoat | Manufacturer: TotalBoat
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon #20
TotalBoat FlexEpox Flexible Epoxy Adhesive (8 Ounce)
Asin: B08DZH7V9C | Ean: 0811932022240 | UPC: 811932022240
Waterproof Bonding Of Wood, Metal, Fiberglass, Glass, Most Plastics, Stone, And Masonry..
Ideal Viscosity For Bonding Joints Or Wetting Out Fiberglass Fabric And Tape To Create Flexible Laminates. Size: 8 Ounces.
Can Be Used In Cooler Temperatures, On Damp Surfaces, And Can Even Cure Underwater..
Easy 1:1 Mix Ratio, Long Working Time, And Fast Cure Time For Reliable Results—Every Time..
Features
- 8 ounce kit. Two-part flexible epoxy adhesive produces permanent, structural bonds with high flex tolerances
- Easy 1:1 mix ratio, long working time, and fast cure time for reliable results every time.
- Waterproof bonding of wood, metal, fiberglass, glass, most plastics, stone, and masonry.
- Can be used in cooler temperatures, on damp surfaces, and can even cure underwater.
- Ideal viscosity for bonding joints or wetting out fiberglass fabric and tape to create flexible laminates. SIZE: 8 OUNCES
- See more on Amazon...
Brand: TotalBoat | Manufacturer: Jamestown Distributors
See On Amazon
Looking For Something Else?
Search