ABN 6in 3-Jaw Gear Puller Gear Removal Tool for Slide Gears, Pulley, and Flywheel
Asin: B06XP5J2X1 | Model: ABN-0296 | PartNumber: ABN-0296 | Ean: 0688295870296 | UPC: 688295870296
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Multi-Position Design]: Universal Pulley Puller Tool Has Reversible Jaws That Switch From Inside To Outside Grip In Short Or Long Reach Lengths For Maximum Versatility; Reach Measures In 4 Lengths From 4.75-Inches To 6-Inches (12 To 15Cm).
[Works With Your Existing Tools]: Tall Hex Head Screw Fits Any 17Mm Hand Wrench, Ratchet, Or Combination Spanner For Gear And Bearing Removal.
[Built To Last]: Forged And Hardened Steel Provide Maximum Strength And Longevity To The Gear Puller Sets; Slim Puller Jaws Allow For Easy Gripping And Access To Tight Spaces While The Steel Center Bolt And Acme-Thread Offer Smooth Operation.
[Damage-Free Removal]: Manual Bearing Puller Removes Slide Gears, Pulleys, Bearings, Bushings, And Flywheels Without Causing Damage To Your Application.
Features
- [Durable 3 Jaw Puller Tool]: Use the ABN 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
- [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
- [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Reach measures in 4 lengths from 4.75-inches to 6-inches (12 to 15cm)
- [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
- [Works with your Existing Tools]: Tall hex head screw fits any 17mm hand wrench, ratchet, or combination spanner for gear and bearing removal
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 9.10 x 4.60 x 4.75 Inches | Weight: 3.51 pounds
See On Amazon Similar To ABN 6in 3Jaw Gear Puller
#1
Orion Motor Tech Gear Puller Set, 3" 4" 6" 8" 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal, Heavy Duty Pulley Puller with Reversible Jaws 4 pcs Bearing Puller Tool Kit
Asin: B084SV21FP | Model: S00400 | PartNumber: S00400
3 Jaw Design: These Power Steering Pulley Pullers Bite Tightly Onto Your Components With Their Reinforced Jaws And Distribute Even Pulling Force To Remove Parts Without Causing Damage.
Tools For Mechanics: Drop-Forged And Heat-Treated Carbon Steel Builds With Corrosion Proof Coatings Ensure These Pullers Last For Resilient Service With Unrivaled Strength And Durability.
Reversible Jaws: Each Pulley Removal Tool Can Be Reversed To Pull Parts From Either The Inside Or Outside, With The 6" And 8" Gear Puller Provide 4 Configurations For A Sure Grip Thanks To Their Dual Fixing Holes.
Better Together: Our Bearing Puller Set Includes Four Puller Sizes, Offering Maximum Spreads Of 3", 4", 6", And 8" And Reaches Of 4.3", 5", 7.3", And 9.2" To Cover Most Applications.
Features
- UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts
- BETTER TOGETHER: Our bearing puller set includes four puller sizes, offering maximum spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2 to cover most applications
- 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage
- REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 and 8 gear puller provide 4 configurations for a sure grip thanks to their dual fixing holes
- TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 4.00 x 11.00 x 5.00 inches | Weight: 10.00 Pounds
Warranty: 1 year
See On Amazon #2
ABN Bolt Grip Set Gear Puller, Steering Wheel Puller, Pulley Puller, Harmonic Balancer Puller, Crank Puller 43pc
Asin: B07JBPV6CM | Model: 8542036230 | PartNumber: 8542036230 | Ean: 0811498037054 | UPC: 811498037054
Built To Last: Puller Remover Tool Kit Has A Forged 3-Way Puller Flange Construction And Grade 8 Hardened Steel Bolts For Maximum Strength And Longevity.
Package Contents: 43-Piece Pulley Removal Tool Set Includes (1) 3-Way Puller Flange/Yoke (With 4 Slots For 2 Or 3 Hole Applications), (2) Different Length Live-Center Forcing Screws, (4) 3-Inch And 6-Inch Live-Center Adapters, (3) Of Each Size Of Bolt, And (1) Carrying Case For Your Convenience.
Easy Storage: Heavy-Duty 14.75” X 3” X 11.3” Inch (37.5Cm X 7.6Cm X 28.7Cm) Plastic Blow-Molded Carrying Case With Latches And Built-In Handle For Easy Transportation, Safe Storage, And Quick Organization; Compartments Include Sizing Labels For Easy Identification.
Various Sizes: Bolt Sizes – M8x1.25X90mm, M8x1.25X45mm, 1/4-28Unfx3” Inches, M8x1.25X65mm, 5/16-24Unfx3” Inches, 5/16-18Uncx3.5” Inches, 3/8-24Unfx1.5” Inches, 3/8-16Uncx2” Inches, 3/8-16Uncx3” Inches, 3/8-16Uncx4.5” Inches, M10x1.5X35mm.
Features
- GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool; Can also handle 2 and 3-way bolt pulling applications
- VARIOUS SIZES: Bolt sizes M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3 inches, M8x1.25x65mm, 5/16-24UNFx3 inches, 5/16-18UNCx3.5 inches, 3/8-24UNFx1.5 inches, 3/8-16UNCx2 inches, 3/8-16UNCx3 inches, 3/8-16UNCx4.5 inches, M10x1.5x35mm
- BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity
- EASY STORAGE: Heavy-duty 14.75 x 3 x 11.3 inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization; Compartments include sizing labels for easy identification
- PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 11.30 x 14.75 x 3.00 inches | Weight: 3.73 Pounds
See On Amazon #3
VEVOR Gear Puller Set, 3" and 7" Puller Kit, 3 Jaw Gear Bearing Flywheel Pulley Removal Tool, 2 or 3 Reversible Jaws Wheel Puller, Vertically and Horizontally, External and Internal, 2-Piece
Asin: B0CKPLHKW3 | Model: XC6527 | PartNumber: XC6527 | Ean: 0840349968629 | UPC: 840349968629
Flexible Jaw Conversion: Effortlessly Switch Between A Two-Jaw And Three-Jaw Wheel Puller For Versatile Pulling Power. Use Two Jaws For Strong Pulling Force, Ideal For Small Bearings And Gears. Three Jaws Form A Stable Triangular Structure, Perfect For Securely Gripping Heavy Components During Disassembly..
Flexible Usage: You Can Easily Reverse Install The Jaw To Access Narrow Spaces, Making It Perfect For Grasping Small-Diameter Hollow Parts. Conversely, The Forward Jaw Is Ideal For Grabbing Large Parts And Adapting To Various Machines' Bearings And Spare Parts..
Built For Durability: Our Gear Puller Is Built To Withstand Tough Tasks. The High-Temperature Quenched Screw, Finely Processed Hook And Claw, And Industrial-Grade 45# Steel Construction Ensure Longevity. A Rust And Corrosion-Resistant Coating Adds To Its Durability..
Effortless Assembly: With Our Two-Step Quick Installation, You Can Have Your Pulley Puller Ready To Use In Just One Minute. Unlike Traditional Pullers, Our Design Minimizes The Number Of Screws And Nuts Required, Reducing The Risk Of Loose Parts During Frequent Hook Switching..
Features
- Complete 2-Piece Set: Our gear puller set comes in two convenient sizes, 3 inches and 7 inches, making it perfect for disassembling various components such as gears, pulleys, bearings, and flywheels. Whether you're a mechanic or run an auto repair shop, these tools are essential for your needs.
- Effortless Assembly: With our two-step quick installation, you can have your pulley puller ready to use in just one minute. Unlike traditional pullers, our design minimizes the number of screws and nuts required, reducing the risk of loose parts during frequent hook switching.
- Flexible Jaw Conversion: Effortlessly switch between a two-jaw and three-jaw wheel puller for versatile pulling power. Use two jaws for strong pulling force, ideal for small bearings and gears. Three jaws form a stable triangular structure, perfect for securely gripping heavy components during disassembly.
- Built for Durability: Our gear puller is built to withstand tough tasks. The high-temperature quenched screw, finely processed hook and claw, and industrial-grade 45# steel construction ensure longevity. A rust and corrosion-resistant coating adds to its durability.
- Flexible Usage: You can easily reverse install the jaw to access narrow spaces, making it perfect for grasping small-diameter hollow parts. Conversely, the forward jaw is ideal for grabbing large parts and adapting to various machines' bearings and spare parts.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Weight: 5.50 Pounds
See On Amazon #4
VEVOR Gear Puller Set, 3" 4" 6" 8" Puller Kit, 3 Jaw Gear Bearing Flywheel Pulley Removal Tool, 2 or 3 Reversible Jaws Wheel Puller, Vertically and Horizontally, External and Internal, 4-Piece
Asin: B0CF15TMFY | Model: 8625-4 | PartNumber: 8625-4 | Ean: 0840349946085 | UPC: 840349946085
Reversible Jaw Design: Install The Jaws In Reverse For Better Grip On Small-Diameter Hollow Components In Narrow Spaces. Install The Jaws In The Forward Direction To Effortlessly Grasp Larger Components And Adapt To Various Machine Parts. With Double Hole Adjustment, The Hook Claw Range Is Expanded, Making It More Adaptable..
Industrial Grade Strength: This Screw Rod Has Been Quenched And Forged At High Temperatures To Make It Incredibly Durable. The Jaws Have Undergone Precision Processing To Ensure A Strong Grip. Made From Tough Industrial Grade 45# Steel, Our Gear Puller Set Boasts A Rust And Corrosion-Resistant Coating For Added Longevity..
Enhanced Durability: Thanks To The Addition Of 12 Locking Nuts That Strengthen The Connection Between The Jaws And Reduce The Risk Of Detachment Over Time Or During Conversions. You Can Expect A Reliable, High-Quality Product That Will Last..
Flexible Jaw Conversion: Effortlessly Switch Between A Two-Jaw And Three-Jaw Pulley Puller For Versatile Pulling Power. Use Two Jaws For Strong Pulling Force, Ideal For Small Bearings And Gears. Three Jaws Form A Stable Triangular Structure, Perfect For Securely Gripping Heavy Components During Disassembly..
Features
- Complete 4-Piece Set: Get the job done right with our professional 4-piece gear puller set. The kit includes 4 pcs gear puller with different Max. Spread (3", 4", 6", and 8") to handle a wide range of disassembly work like gears, pulleys, bearings, and flywheels. Perfect for mechanics, repair garages, and more.
- Flexible Jaw Conversion: Effortlessly switch between a two-jaw and three-jaw pulley puller for versatile pulling power. Use two jaws for strong pulling force, ideal for small bearings and gears. Three jaws form a stable triangular structure, perfect for securely gripping heavy components during disassembly.
- Reversible Jaw Design: Install the jaws in reverse for better grip on small-diameter hollow components in narrow spaces. Install the jaws in the forward direction to effortlessly grasp larger components and adapt to various machine parts. With double hole adjustment, the hook claw range is expanded, making it more adaptable.
- Enhanced Durability: Thanks to the addition of 12 locking nuts that strengthen the connection between the jaws and reduce the risk of detachment over time or during conversions. You can expect a reliable, high-quality product that will last.
- Industrial Grade Strength: This screw rod has been quenched and forged at high temperatures to make it incredibly durable. The jaws have undergone precision processing to ensure a strong grip. Made from tough industrial grade 45# steel, our gear puller set boasts a rust and corrosion-resistant coating for added longevity.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #5
BELOMI 3 Jaw Inner Bearing Puller, Pilot Bearing Gear Puller for Auto with Reversible Jaws, Heavy Duty Gear Extractor Tool for Automotive Wheel, Pulling Kit for Motorcycle Car SUV (6 inch)
Asin: B0CJR59FHY | Model: Inner Bearing Puller | PartNumber: Inner Bearing Puller
【Practical Pulling Tool】: If You Carry Out Work To Remove Pulleys, Gears, Bearings, Cranks Etc., Our Wheel Bearing Removal Tool Makes It Easy To Pull Them Out And Protects These Car Parts Well From Damaging Them, Increasing Your Efficiency And Saving You Time..
【Package Includes】: There Are Three Size Specifications: 3 Inches, 4 Inches Or 6 Inches. Please Choose According To The Size Of The Part You Need To Handle And The Range Of 3 Jaw Puller To Avoid Unsuitable Application. And Each Package Includes 1 Piece 3-Jaw Pilot Bearing Puller..
【Wide Application】: Our 3-Jaw Inner Bearing Puller Is Perfect For A Wide Range Of Uses, Including Motorcycle Wheel, Bicycle Wheel, Pump Bearing Generator Bearing, Machine Bearing Etc. Structure Design, Gently Turning The Small Wrench Can Produce A Strong Pull Force..
【Three-Jaw Design】: The Bearing Puller Group Adopts A Three-Jaw Design. The Three-Jaw Design Can Apply Uniform Pressure, Which Can Effectively Prevent Slippage And Bearing Damage, And Ensure Stability During Use. It Allows For A Strong Pulling Force With Minimal Effort..
Features
- Premium Quality : The 3-Jaw bearing extractor pilot bearing puller is made of high-grade carbon steel material with black oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws. Our inner bearing puller is also heat-treated for exceptional strength and longevity. The corrosion-resistant coating ensures optimal performance and protection.
- Three-Jaw Design : The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure stability during use. It allows for a strong pulling force with minimal effort.
- Practical Pulling Tool : If you carry out work to remove pulleys, gears, bearings, cranks etc., our wheel bearing removal tool makes it easy to pull them out and protects these car parts well from damaging them, increasing your efficiency and saving you time.
- Wide Application : Our 3-Jaw Inner Bearing Puller is perfect for a wide range of uses, including motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc. Structure design, gently turning the small wrench can produce a strong pull force.
- Package Includes : There are three size specifications: 3 inches, 4 inches or 6 inches. Please choose according to the size of the part you need to handle and the range of 3 jaw puller to avoid unsuitable application. And each package includes 1 piece 3-jaw pilot bearing puller.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.70 x 2.00 x 1.50 inches
Warranty: 0.2
See On Amazon #6
DURATECH 4-Piece 3-Jaw Gear Puller, 3", 4", 6", 8", Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel
Asin: B08G8TZ5HM | Model: DT3JGP04S | PartNumber: DT3JGP04S | Ean: 0820909680871 | UPC: 820909680871
Each Of The Three 3-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. Universal 4 Or 8-Position Reversible Jaws Offer An Inside Or Outside Grip With Short, Standard, Long, Or Extra-Long Reach..
Use The Duratech 3, 4, 6, And 8-Inch Gear Puller 3 Jaw Flywheel Puller Set To Remove Most Shift-Fitted Parts With Ease. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
The Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas. Achieve More With Its Adjustable And Reversible Jaws..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphatizing, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. No Need To Assemble Yourself Is The Advantage Of Duratech..
Features
- Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8-position reversible jaws offer an inside or outside grip with short, standard, long, or extra-long reach.
- The three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws.
- Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon #7
GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2 and 5 Ton - 3627
Asin: B003TO9YDS | Model: 3627 | PartNumber: 3627 | Ean: 0634746243133, 0094715613921, 0821710362796, 0787721780809, 0082171036279, 0765042375089 | UPC: 821710362796, 094715613921, 765042375089, 634746243133, 082171036279, 787721780809
Pullers Can Also Be Converted To Two- And Three-Leg Pullers.
Legs Index Into Position And Stay In Place, Letting You Easily Support The Puller And Quickly Connect Each Jaw One At A Time To The Pulley Without Help.
Features
- Ratcheting pullers have a time-saving, indexing jaw design
- Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help
- Pullers can also be converted to two- and three-leg pullers
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: GEARWRENCH
Dimensions: 2.00 x 11.50 x 7.90 inches | Weight: 5.13 Pounds
Warranty: Standard Limited Lifetime
See On Amazon #8
ChgImposs 12 Inch 2-Jaw Gear Puller, Adjustable CR-V Bearing Puller Gears, Removal Tool for External Internal Pulling, Puller Tool Separate Lifting Device
Asin: B0CH9Z6DFN | Model: EPC_HAD_B0P | PartNumber: EPC_HAD_B0P
Adjustable Design - Adjustable Clamping Depth And Grip Width, Suitable For Different Sizes Of Gears And Bearings，Enables Many Bearings And Components To Be Dismounted.
Ease Of Use - Hexagonal Head On Spindle With A Flange, Helps Prevent The Spanner From Slipping During Operation. Button On Beam Enhances The Stability And Safety, Also Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
Damage Free Removal - Removal Tool Kit For Slide Gears, Pulley, And Flywheel, Makes Removal Simple And Damage-Free. Can Be Used For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel, Etc.
Multi-Purpose Reversible Jaw Puller - The Two Arms Of The Puller Can Be Mounted With The Claws Facing Inside Or Facing Outside, Suit For Internal And External Pulling Of Bearings And Other Components..
Features
- High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearings enables many bearings and components to be dismounted
- Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller.
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
Dimensions: 1.30 x 11.00 x 10.00 Inches
Warranty: This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.
See On Amazon #9
XMHF Adjustable 2-Jaw Gear Puller Motorcycle Car Auto Removal Tool Kit for Gears, Pulley, and Flywheel
Asin: B07FY4BT8B | Model: 8542036317 | PartNumber: 8542036317 | Ean: 7679477514278
Claw Size: 10 X 3 X 0.5Cm/ 3.9 X 1.2 X 0.2 Inches(L*W*T).
Package Content: 1 X Two Jaw Puller Tool.
Weight:378G.
Dimension: 12.5 X 8 X 3Cm/ 4.9 X 3.1 X 1.2 Inches(L*W*T).
Features
- Material:Carbon Steel ; Color: Black,Brass Tone
- Dimension: 12.5 x 8 x 3cm/ 4.9 x 3.1 x 1.2 inches(L*W*T)
- Claw Size: 10 x 3 x 0.5cm/ 3.9 x 1.2 x 0.2 inches(L*W*T)
- Weight:378g
- Package Content: 1 x Two Jaw Puller Tool
- See more on Amazon...
Brand: XMHF | Manufacturer: XMHF
See On Amazon #10
DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Assembly Required, CR-V Steel
Asin: B08G8SR5N5 | Ean: 0820909680857 | UPC: 820909680857
The Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas..
Jaw Spread: 8In, Jaw Reach: 9-1/16In, Puller: 12T, Maximum Use Range: 200Mm. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphatizing, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. Assembly Required..
Features
- Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. Assembly required.
- The three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas.
- Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T, Maximum use range: 200mm. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon #11
Performance Tool W137P 6-Inch 3-Jaw Gear Puller with Reversible Design for Vehicle Maintenance and Repair, Drop-Forged Steel, Chrome Plating
Asin: B000V4FIRK | Model: W137P | PartNumber: W137P | Ean: 0039564101465, 0027077003987 | UPC: 027077003987, 039564101465
Drop Forged For Strength.
Durable Construction: Mig Welding; Industrial Grade Air Hose With Standard Tire Air Chuck.
Chrome Plated Finish.
Chrome Vanadium Jaws.
Features
- Heat treated center screw
- Chrome vanadium jaws
- Drop forged for strength
- Chrome plated finish
- DURABLE CONSTRUCTION: MIG welding; Industrial grade air hose with standard tire air chuck
- See more on Amazon...
First Available: 11/06/2019
Brand: Performance Tool | Manufacturer: Performance Tool
Dimensions: 3.30 x 8.80 x 4.30 Inches | Weight: 0.53 pounds
Warranty: Manufacturer Warranty
See On Amazon #12
BILITOOLS 6" 2-Jaw Gear Puller, Internal External for Removal of Pulleys Flywheels Bearings & Gears
Asin: B0B312ZRFY | Ean: 6974676371327
2 Jaw Gear Puller Can Be Reversed To Pull Parts From Either The Inside Or Outside. The Jaws Allows For Easy Gripping And Access To Tight Spaces..
There Are 5 Different Sizes Of Jaw Puller For You To Choose To Deal With Different Parts (Small, Medium And Large): 3", 4", 6", 8", 10".
The Button Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
This 2 Jaw Gear Puller Is Made With Premium Heat-Treated Cr-V Steel To Ensure No Breakages Or Bend Occur From The High Tension Experienced During Pulling..
Features
- 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.
- 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.
- The button makes it easily to change the puller into internal or external gear puller.
- There are 5 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 3, 4, 6, 8, 10
- See more on Amazon...
Brand: BILITOOLS | Manufacturer: BILITOOLS
Dimensions: 6.89 x 8.82 x 1.50 Inches
See On Amazon #13
ChgImposs 8 Inch CR-V 2-Jaw Gear Puller, Adjustable Bearing Puller Gears, Reversible Removal Tool for External Internal Pulling, Single Hook Two Claws Puller Tool Separate Lifting Device
Asin: B07LC7MC52 | Model: HAD_B07 | PartNumber: HAD_B07 | Ean: 4895192456799
High Quality Material - Made Of Chrome Vanadium Steel For Strength And Longevity, Heat Treatment Process Makes It More Durable..
Ease Of Use - Hexagonal Head On Spindle With A Flange, Helps Prevent The Spanner From Slipping During Operation. Button On Beam Enhances The Stability And Safety, Also Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
Damage Free Removal - Removal Tool Kit For Slide Gears, Pulley, And Flywheel, Makes Removal Simple And Damage-Free. Can Be Used For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel, Etc.
Adjustable Design - Adjustable Clamping Depth And Grip Width, Suitable For Different Sizes Of Gears And Bearings，Enables Many Bearings And Components To Be Dismounted.
Features
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearings enables many bearings and components to be dismounted
- High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.
- Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller.
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
See On Amazon #14
ABN Harmonic Damper Pulley Puller 6-Piece Set for Harmonic Balancer Removal on Chrysler, GM, Mitsubishi Vehicles
Asin: B0716Y8HYD | Model: 4348479294 | PartNumber: 4348479294 | Ean: 0688295874225 | UPC: 688295874225
Built To Last: Enhanced Design With Spring-Loaded Legs For Optimal Position Retention; All Steel Construction For Extra Strength And Longevity; Black Oxide Finish For Corrosion Resistance.
Fitment: 3/8” Drive For Use With Ratchet And 3/4" Drive For Wrench Or Socket Use; See Product Description For Full Chrysler, Mitsubishi, Gm, Cadillac, Oldsmobile Fitment List; Measure Balancer To See Fitment For Any Vehicle.
Easy Storage: Heavy-Duty 9” X 7” X 2” (23Cm X 18Cm X 5Cm) Blow-Mold Plastic Carrying Case With Handle And Latches For Secure Storage, Easy Transportation, And Organization.
Various Applications: Compatible With Chrysler, Gm, Mitsubishi, Cadillac, And Oldsmobile Vehicles; Cars, Suvs, Vans, And Pickup Trucks.
Features
- EASY HARMONIC DAMPER REMOVAL: Use the ABN Harmonic Damper Pulley Puller 6-Piece Set for Harmonic Balancer Removal on Chrysler, GM, Mitsubishi Vehicles when you need to remove the harmonic balancer on your vehicle
- VARIOUS APPLICATIONS: Compatible with Chrysler, GM, Mitsubishi, Cadillac, and Oldsmobile vehicles; Cars, SUVs, vans, and pickup trucks
- BUILT TO LAST: Enhanced design with spring-loaded legs for optimal position retention; All steel construction for extra strength and longevity; Black oxide finish for corrosion resistance
- EASY STORAGE: Heavy-duty 9 x 7 x 2 (23cm x 18cm x 5cm) blow-mold plastic carrying case with handle and latches for secure storage, easy transportation, and organization
- FITMENT: 3/8 drive for use with ratchet and 3/4 drive for wrench or socket use; See product description for full Chrysler, Mitsubishi, GM, Cadillac, Oldsmobile fitment list; Measure balancer to see fitment for any vehicle
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 7.30 x 2.15 x 9.00 Inches | Weight: 3.33 pounds
See On Amazon #15
ABN 6in 2-Jaw Gear Puller Removal Tool for Gears, Pulley, and Flywheel
Asin: B077K6KYM6 | Model: ABN-9640 | PartNumber: ABN-9640 | Ean: 0688295879640 | UPC: 688295879640
[Optimal Reach]: Struggling To Access Tight, Cramped Spaces Is A Thing Of The Past; Use The Small Jaw Puller Bearing Automotive Gear Puller Removes Gears, Pulleys, And Flywheels Off Of A Shaft In Hard-To-Reach Spots Without Damage To Your Application.
[Perfect Size]: 2-Jaw Transmission Gear Puller Measures 6.25 Inches (22.2Cm) With Jaw Spread; Universal Pulley Puller Has 4.75-Inch (12.1Cm) Jaw Reach For Your Vehicle Maintenance Projects; Use Any 17Mm Hand Wrench, Ratchet, Or Combination Spanner With This Jaw Gear Puller Set 1-Pack.
[Adjustable Performance]: Whether You Are Looking To Remove Parts From Your Engine Base Or Your Wheels, Jaw Puller Too Features Universal And Reversible Jaws Offer Versatile Inside Or Outside Grip Along With Short Or Long Reach.
[Built To Last]: No Need To Worry About This Hub Puller Tool Falling Apart When You Need It Most; Constructed Of Forged And Hardened Steel For Strength And Longevity, Steel Drive Screw Is Cold-Rolled And Acme-Threaded To Give You Smooth Performance Even Under High Stress.
Features
- [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool; Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles
- [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most; Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
- [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past; Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
- [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach
- [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread; Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects; Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 1.80 x 9.75 x 6.90 Inches | Weight: 2.71 Pounds
See On Amazon #16
CMTOOL Gear Puller Set 3" 4" 6" 8" Bearing Puller Kit 2 Jaw Puller 3 Jaw Puller Set Gear Hub Pulley Puller Tool Steering Wheel Flywheel Puller Removal Tool Kit Heavy Duty Puller Tools for Mechanic
Asin: B0C4FBNMG9 | Model: AQ-80 | PartNumber: AQ-80 | Ean: 0728990666142 | UPC: 728990666142
3.【Durable High-Quality Carbon Steel Material】The Leg Puller Is Made Of Selected Carbon Steel Material, Widened And Thickened Overall, Not Easy To Break, And Has A Long Service Life. The Threaded Forcing Rods Have A Black Oxide Coating And Fine Threads To Maximize Torque For Efficient Removal And Are Hardened To Resist Corrosion. The Whole Screw Rod Holder Is Heat-Treated, High-Frequency Quenched, High Hardness, Corrosion-Resistant And Not Easy To Rust. The Steel Plates Are Made Of High-Carbon Steel, With High Torque, Good Toughness, And Durability..
5.【Easy To Assemble Puller Kit】(1) Select 2Pcs Steel Plates, 1Pc Leg Puller, 1Pc Nut And 1Pc Nut; (2) Choose The Same Hole To Install The Steel Plate, And Assemble The Other Two Leg Pullers In The Same Way; (3) Connect The Threaded Forcing Rod With The Screw Rod Holder; Connect The Leg Puller And The Screw Rod Holder; (4) Adjust The Direction Of The Steel Plate So That The Direction Of The Jaw Ends Is Consistent, And The Assembly Is Completed..
6.【Packing List And 2-Year Warranty】The Gear Puller Tool Kit Include 4Pcs Threaded Forcing Rods, 4Pcs Straight Screw Rod Holders, 4Pcs Triangular Screw Rod Holders, 12Pcs Leg Pullers, 24Pcs Steel Plates, 24Pcs Nuts, 24Pcs Bolts. Comes With A Custom Blow-Molded Carrying Case That Better Protects The Gear Puller Tool From Impact For Easy Storage, Quick Organization And Transport. We Provide A 24-Month Free Warranty And 24-Hour Friendly Customer Service To Ensure Your Shopping Experience. If You Have Any Questions About This Gear Puller Set, Please Feel Free To Contact Us And We Will Provide You With A Satisfactory Solution As Soon As Possible..
4.【Reversible Jaws And Dule Fixing Holes】All Four Sizes Of Leg Pullers Can Be Reversed To Pull Parts From The Inside Or The Outside. The 4", 6" And 8" Leg Pullers All Have Dual Fixing Holes To Set It In 4 Configurations Of Short, Standard, Long And Extra-Long Reach For The Perfect Grip Wherever They Are Applied. Six High-Strength Nuts And Bolts Are Used In Conjunction With Steel Plates To Establish A Firm Connection Between The Threaded Forcing Rod And The Jaws To Ensure Safe And Stable Operation..
2.【2 Jaw Puller And 3 Jaw Puller Set】The Bearing Puller Set Include Straight Screw Rod Holders And Triangular Screw Rod Holders Of Different Sizes, Which Can Be Assembled Into Two-Jaw Pullers And Three-Jaw Pullers With Other Accessories. These Pulley Puller Tools Firmly Grip Your Components With Their Reinforced Jaw Ends And Distribute Pulling Force Evenly To Remove Parts Without Damage..
Features
- 1. Multiple Sizes and Wide Application The bearing puller kit includes four sizes of pullers, offering maximum spreads of 3 inches, 4 inches, 6 inches and 8 inches and reaches of 4.3 inches, 5 inches, 7.3 inches and 9.2 inches. The gear puller set works with your spanner, ratchet or wrench, suitable for removing gears, hubs, bearings, ball races, pulleys, sprockets and freewheels, and widely used in cars, trucks, bicycles, motorcycles, ATVs and Lawnmower.
- 2. 2 Jaw Puller and 3 Jaw Puller Set The bearing puller set include straight screw rod holders and triangular screw rod holders of different sizes, which can be assembled into two-jaw pullers and three-jaw pullers with other accessories. These pulley puller tools firmly grip your components with their reinforced jaw ends and distribute pulling force evenly to remove parts without damage.
- 3. Durable High-Quality Carbon Steel Material The leg puller is made of selected carbon steel material, widened and thickened overall, not easy to break, and has a long service life. The threaded forcing rods have a black oxide coating and fine threads to maximize torque for efficient removal and are hardened to resist corrosion. The whole screw rod holder is heat-treated, high-frequency quenched, high hardness, corrosion-resistant and not easy to rust. The steel plates are made of high-carbon steel, with high torque, good toughness, and durability.
- 4. Reversible Jaws and Dule Fixing Holes All four sizes of leg pullers can be reversed to pull parts from the inside or the outside. The 4, 6 and 8 leg pullers all have dual fixing holes to set it in 4 configurations of short, standard, long and extra-long reach for the perfect grip wherever they are applied. Six high-strength nuts and bolts are used in conjunction with steel plates to establish a firm connection between the threaded forcing rod and the jaws to ensure safe and stable operation.
- 5. Easy to Assemble Puller Kit (1) Select 2pcs steel plates, 1pc leg puller, 1pc nut and 1pc nut; (2) Choose the same hole to install the steel plate, and assemble the other two leg pullers in the same way; (3) Connect the threaded forcing rod with the screw rod holder; connect the leg puller and the screw rod holder; (4) Adjust the direction of the steel plate so that the direction of the jaw ends is consistent, and the assembly is completed.
- 6. Packing List and 2-Year Warranty The gear puller tool kit include 4pcs threaded forcing rods, 4pcs straight screw rod holders, 4pcs triangular screw rod holders, 12pcs leg pullers, 24pcs steel plates, 24pcs nuts, 24pcs bolts. Comes with a custom blow-molded carrying case that better protects the gear puller tool from impact for easy storage, quick organization and transport. We provide a 24-month free warranty and 24-hour friendly customer service to ensure your shopping experience. If you have any questions about this gear puller set, please feel free to contact us and we will provide you with a satisfactory solution as soon as possible.
- See more on Amazon...
Brand: CMTOOL | Manufacturer: CMTOOL
Warranty: 2 year
See On Amazon #17
XIIW 2 Jaw Gear Puller Set, 4'' 6'' 8'' CR-V Steel Bearing Puller Gears Tool Adjustable, 2 Claws Puller Kit for Removal of Pulley Flywheel Bearings Gears
Asin: B0CP553YHN | Model: XIIW- 2-Jaw Gear Puller | PartNumber: XIIW- 2-Jaw Gear Puller
【Safety Lock Design】Ensure That The Workpiece Stays Securely In Place During Operation To Prevent Any Potential Accidents Or Risks..
【Widely Used】Two Jaw Puller Can Easily Disassemble Bearings, Gears And Rotors. Suitable For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel And So On..
【Multiple Sizes】The Flywheel Puller Is Available In 3 Different Sizes. 4Inch, 6Inch, 8Inch, A Variety Of Sizes To Meet Your Different Needs..
【Reversible 2 Jaw Puller】Each Of The Three 2-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. The Spherical Tip Design Of The Gearing Puller Increases The Contact Area, Preventing Damage To The Workpiece..
Features
- CR-V Steel Our 2 claw puller is made using advanced forging technology and incorporates CrV steel with added chromium and vanadium, making it harder than carbon steel. This enhances the tool's corrosion resistance, provides excellent strength, and increases its hardness!
- Reversible 2 Jaw Puller Each of the three 2-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. The spherical tip design of the gearing puller increases the contact area, preventing damage to the workpiece.
- Safety Lock Design Ensure that the workpiece stays securely in place during operation to prevent any potential accidents or risks.
- Multiple Sizes The flywheel puller is available in 3 different sizes. 4inch, 6inch, 8inch, a variety of sizes to meet your different needs.
- Widely Used Two jaw puller can easily disassemble bearings, gears and rotors. Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel and so on.
- See more on Amazon...
Brand: XIIW | Manufacturer: XIIW
Warranty: 1 year
See On Amazon #18
Bonvoisin 3 Jaw Puller 4" 6" 8" Gear Bearing Puller Set Pulley Puller Gear Removal Tool for Slide Gears Bearings Flywheels Pulleys (3 Piece Set)
Asin: B093W7GGQM | Model: SUS-43 | PartNumber: SUS-43 | Ean: 0795787258484 | UPC: 795787258484
[High Hardness]-The Claw Puller Adopts Overall Heat Treatment, With High Hardness, Large Torque, And Labor-Saving Operation..
[Wide Applications]-The Pulley Puller Can Be Used To Remove Slide Gears, Pulleys, Bearings, Bushings, And Flywheels Without Causing Any Damage To Your Application..
[3 Or 2 Claws Interchange]-3 Claws / 2 Claws Can Be Easily Interchanged, Free From Site Restrictions, Flexible Operation And Simple Replacement..
Features
- [Surface Phosphating Treatment]-The gear puller has undergone phosphating treatment and has the following advantages: Strong corrosion resistance; Enhanced adhesion with bearings and other machinery; Clean surface and no grease; Reduced friction.
- [3 or 2 Claws Interchange]-3 claws / 2 claws can be easily interchanged, free from site restrictions, flexible operation and simple replacement.
- [High hardness]-The claw puller adopts overall heat treatment, with high hardness, large torque, and labor-saving operation.
- [Wide Applications]-The pulley puller can be used to remove slide gears, pulleys, bearings, bushings, and flywheels without causing any damage to your application.
- See more on Amazon...
Brand: Bonvoisin | Manufacturer: Bonvoisin
See On Amazon #19
COOLOUS 6" Gear Puller,2 Jaw / 3 Jaw Puller with Reversible Jaws, Pulley Puller Removal Tool for Pulley Gear Bearing Flywheel, Bearing Puller Suitable for Automotive Repair and Industrial Maintenance
Asin: B0C85WZ1K4 | Model: GP6 | PartNumber: GP6 | Ean: 0791107389937 | UPC: 791107389937
【Built To Last】The Structure Of The Gear Puller Is Very Strong, Using High-Quality Materials Such As Carbon Steel. The Whole Body Is Heat-Treated For Extra Strength And Durability, And The Center Screw Is Coated With Black Oxide, Which Has Excellent Corrosion Resistance And Long Service Life..
【Multiple Applications】With Its Versatility, Durability, And Convenience, This Bearing Puller Is A Reliable And Indispensable Tool For Any Professional Mechanic, Engineer, Or Diy Enthusiast. It Streamlines The Extraction Process, Making Your Work More Efficient And Ensuring Successful Outcomes In Various Applications..
【Reversible Jaws】By Simply Flipping The Gear Puller's Arms And Repositioning Them, You Can Switch Between Internal And External Pulling Operations Effortlessly. The Jaws Allows For Easy Gripping And Access To Tight Spaces. This Feature Eliminates The Need For Multiple Tools And Saves Valuable Time And Effort..
【Classic Design】The Key Feature Of This Jaw Puller Is Its Three Jaws, Which Are Capable Of Evenly Distributing The Pulling Force Around The Target Object. The Jaws Can Be Adjusted To Fit Different Sizes And Shapes, Allowing For Efficient Removal Without Causing Damage Or Distortion..
Features
- CAN BE A 2 JAW PULLER By simply reconfiguring the jaws, this pulley puller can also be transformed into a two-jaw puller. This conversion expands its usability, as it becomes suitable for extracting components in confined spaces or instances where a two-jaw approach is more appropriate. This adaptability enhances the tool's versatility and makes it a valuable addition to any toolkit.
- CLASSIC DESIGN The key feature of this jaw puller is its three jaws, which are capable of evenly distributing the pulling force around the target object. The jaws can be adjusted to fit different sizes and shapes, allowing for efficient removal without causing damage or distortion.
- BUILT TO LAST The structure of the gear puller is very strong, using high-quality materials such as carbon steel. The whole body is heat-treated for extra strength and durability, and the center screw is coated with black oxide, which has excellent corrosion resistance and long service life.
- REVERSIBLE JAWS By simply flipping the gear puller's arms and repositioning them, you can switch between internal and external pulling operations effortlessly. The jaws allows for easy gripping and access to tight spaces. This feature eliminates the need for multiple tools and saves valuable time and effort.
- MULTIPLE APPLICATIONS With its versatility, durability, and convenience, this bearing puller is a reliable and indispensable tool for any professional mechanic, engineer, or DIY enthusiast. It streamlines the extraction process, making your work more efficient and ensuring successful outcomes in various applications.
- See more on Amazon...
Brand: COOLOUS | Manufacturer: YUNZHICHENG
Warranty: 1 year
See On Amazon
Looking For Something Else?
Search