KNACRO DC 5V 1 Channel 30A Relay Module Bidirectional Optocoupler Isolation High Low Level Trigger for PLC Equipment, Industrial Systems, Furniture Intelligent Control, Development Test
Asin: B06XTZZBXW | Model: 4350282463 | PartNumber: 4350282463 | Ean: 0713653013517 | UPC: 713653013517
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Relay High Level Pull, The Module Contains Current Limiting Resistor, High Level Can Be Dc +, Can Also Be Single-Chip I / O Port Set High;.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Work;Power Indicator (Red), 1-Channel Relay Status Indicator (Blue);, All Interfaces Can Be Directly Connected Through The Terminal Leads, Very Convenient; Module Size: 6.0Cm * 3.0M * 2.5Cm (L * W * H); With 4 * 2.0Mm Diameter Fixed Bolt Holes, Easy To Install;.
The Module Uses High-Quality Power Relay, Ultra-Small Package Optocoupler, High-Power High-Voltage Transistor, Red And Blue Signal Indicator, Double-Sided Pcb Board, Cloth Board To Consider A Comprehensive, Stable Performance Can Be Widely Used In A Variety Of Power Control .The Module Operating Voltage 5V, 12V, 24V To Choose From;.
Features
- Isolation 1-Channel high-power relay control module, select the high signal trigger, only need 3mA current can drive control capability of 30A relay pull.The module uses high-quality relay, normally open interface Maximum load: AC 250V / 30A, DC 30V / 30A;
- The module uses high-quality power relay, ultra-small package optocoupler, high-power high-voltage transistor, red and blue signal indicator, double-sided PCB board, cloth board to consider a comprehensive, stable performance can be widely used in a variety of power control .The Module operating voltage 5V, 12V, 24V to choose from;
- Relay high level pull, the module contains current limiting resistor, high level can be DC +, can also be single-chip I / O port set high;
- Fault-tolerant design, even if the control line is broken, the relay will not work;Power indicator (red), 1-Channel relay status indicator (blue);, All interfaces can be directly connected through the terminal leads, very convenient; Module size: 6.0cm * 3.0m * 2.5cm (L * W * H); With 4 * 2.0MM diameter fixed bolt holes, easy to install;
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon Similar To KNACRO DC 5V 1 Channel
#1
KNACRO 1-Channel CH340 5V Relay Module with Square USB Male Interface Plug and Play
Asin: B0797PDXVV | Model: 1-Channel 5V Relay Module | PartNumber: 1-Channel 5V Relay Module | Ean: 0736364872815 | UPC: 736364872815
Onboard Power Led Indicator And Relay Status Indicator.
Module With Overcurrent Protection And Relay Diode Freewheel Protection.
Onboard 5V, 10A/250V Ac, 30V Dc Relay, Relay Life Up To 100,000 Times;.
The Onboard 350Ma Self-Recovery Fuse Protects The Computer's Usb Port From Damage..
Features
- Onboard CH340 USB Control Chip
- The onboard 350mA self-recovery fuse protects the computer's usb port from damage.
- Onboard power led indicator and relay status indicator
- Onboard 5V, 10A/250V AC, 30V DC relay, relay life up to 100,000 times;
- Module with overcurrent protection and relay diode freewheel protection
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #2
KNACRO 5V 4 Channel 10A PC USB Control Switch Relay Module Free Drive Programmable Computer Control Computer USB Control Switch Driver PC Intelligent Controller
Asin: B07VPBCG22 | Ean: 0724873028519 | UPC: 724873028519
High-Performance Usb Controller Chip, Military Grade Pcb Board Production.
Reserved 4, 8-Way Power Interface, Connected To Power, Even If The Computer Off Or Unplug The Usb From The Computer, You Can Also Relay Remains Set. 1-Way And 2-Way No Power Connector..
5V Relay, The Relay Can Control The Maximum 250V 10A Ac Load And 30V 10A Dc Load..
The Module Uses Hid Technology, Without Any Drivers, Plug And Play. Support Win7/Xp 32/64-Bit Systems, Easy To Use And Simple..
Features
- If you nedd the soft and C++ code to control this device, just contact us on amazon!
- The module uses HID technology, without any drivers, plug and play. Support WIN7/XP 32/64-bit systems, easy to use and simple.
- High-performance USB controller chip, military grade PCB board production
- 5V relay, the relay can control the maximum 250V 10A AC load and 30V 10A DC load.
- Reserved 4, 8-way power interface, connected to power, even if the computer off or unplug the USB from the computer, you can also relay remains set. 1-way and 2-way no power connector.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #3
KNACRO SRD-05VDC-SL-C 4-Channel 10A 5V Relay Module Free Driver USB Control Switch PC Intelligent Control (5V 4-Channel)
Asin: B07CR2XT5R | Ean: 0736364876363 | UPC: 736364876363
High-Performance Usb Controller Chip, Military Grade Pcb Board Production.
Reserved 4, 8-Way Power Interface, Connected To Power, Even If The Computer Off Or Unplug The Usb From The Computer, You Can Also Relay Remains Set. 1-Way And 2-Way No Power Connector..
5V Relay, The Relay Can Control The Maximum 250V 10A Ac Load And 30V 10A Dc Load..
The Module Uses Hid Technology, Without Any Drivers, Plug And Play. Support Win7/Xp 32/64-Bit Systems, Easy To Use And Simple..
Features
- If you nedd the soft and C++ code to control this device, just contact us on amazon!
- The module uses HID technology, without any drivers, plug and play. Support WIN7/XP 32/64-bit systems, easy to use and simple.
- High-performance USB controller chip, military grade PCB board production
- 5V relay, the relay can control the maximum 250V 10A AC load and 30V 10A DC load.
- Reserved 4, 8-way power interface, connected to power, even if the computer off or unplug the USB from the computer, you can also relay remains set. 1-way and 2-way no power connector.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #4
KNACRO 5V 30A 1-Channel Relay Module High Low Level Triggering Optocoupler Isolation Load 30A DC 30V AC 250V for PLC Automation Control, Industrial System Control(5V, 1-Channel)
Asin: B07KXNCL91 | Ean: 0724873026393 | UPC: 724873026393
Using Optocoupler Isolation, Strong Anti-Jamming Capability And Stable Performance..
To Ensure Stability, Uses Industrial Grade Pcb Board And 9.5Mm Barrier Terminals..
The Module Can Be Set High Or Low Trigger..
Output Capacity: Within Dc 30V 30A Or Ac 250V 30A..
Features
- 1-channel, DC 5V 30A relay module
- Output capacity: within DC 30V 30A or AC 250V 30A.
- Using optocoupler isolation, strong anti-jamming capability and stable performance.
- The module can be set high or low trigger.
- To ensure stability, uses industrial grade PCB board and 9.5mm barrier terminals.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #5
KNACRO 5V 30A 1-Channel Relay Module High Low Level Triggering Optocoupler Isolation Load 30A DC 30V AC 250V for PLC Automation Control, Industrial System Control(DC 5V)
Asin: B077RXR3JG | Model: 4350283129 | PartNumber: 4350283129 | Ean: 0603432625263 | UPC: 603432625263
Using Optocoupler Isolation, Strong Anti-Jamming Capability And Stable Performance..
To Ensure Stability, Uses Industrial Grade Pcb Board And 9.5Mm Barrier Terminals..
The Module Can Be Set High Or Low Trigger..
Output Capacity: Within Dc 30V 30A Or Ac 250V 30A..
Features
- 1-channel, DC 5V 30A relay module
- Output capacity: within DC 30V 30A or AC 250V 30A.
- Using optocoupler isolation, strong anti-jamming capability and stable performance.
- The module can be set high or low trigger.
- To ensure stability, uses industrial grade PCB board and 9.5mm barrier terminals.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #6
KNACRO DC 5V 1-Channel 30A Relay Control Module Bi-Directional Isolated Control Module High Low Level Trigger (DC 5V, 30A 1-Channel)
Asin: B07BHLYWLT | Ean: 0736364874253 | UPC: 736364874253
Relay High Level Pull, The Module Contains Current Limiting Resistor, High Level Can Be Dc +, Can Also Be Single-Chip I / O Port Set High;.
All Interfaces Can Be Directly Connected Through The Terminal Leads, Very Convenient; Module Size: 6.0Cm * 8.5Cm * 2.5Cm (L * W * H) (Weight 105G); With Four Fixed Bolt Holes, Easy To Install;.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Work;Power Indicator (Red), 1-Channel Relay Status Indicator (Blue);, All Interfaces Can Be Directly Connected Through The Terminal Leads, Very Convenient; Module Size: 6.0Cm * 3.0M * 2.5Cm (L * W * H); With 4 * 2.0Mm Diameter Fixed Bolt Holes, Easy To Install;.
The Module Uses High-Quality Power Relay, Ultra-Small Package Optocoupler, High-Power High-Voltage Transistor, Red And Blue Signal Indicator, Double-Sided Pcb Board, Cloth Board To Consider A Comprehensive, Stable Performance Can Be Widely Used In A Variety Of Power Control .The Module Operating Voltage 5V, 12V, 24V To Choose From;.
Features
- Isolation 1-Channel high-power relay control module, select the high signal trigger, only need 3mA current can drive control capability of 30A relay pull.The module uses high-quality relay, normally open interface Maximum load: AC 250V / 30A, DC 30V / 30A;
- The module uses high-quality power relay, ultra-small package optocoupler, high-power high-voltage transistor, red and blue signal indicator, double-sided PCB board, cloth board to consider a comprehensive, stable performance can be widely used in a variety of power control .The Module operating voltage 5V, 12V, 24V to choose from;
- Relay high level pull, the module contains current limiting resistor, high level can be DC +, can also be single-chip I / O port set high;
- Fault-tolerant design, even if the control line is broken, the relay will not work;Power indicator (red), 1-Channel relay status indicator (blue);, All interfaces can be directly connected through the terminal leads, very convenient; Module size: 6.0cm * 3.0m * 2.5cm (L * W * H); With 4 * 2.0MM diameter fixed bolt holes, easy to install;
- All interfaces can be directly connected through the terminal leads, very convenient; Module size: 6.0cm * 8.5Cm * 2.5cm (L * W * H) (weight 105g); With four fixed bolt holes, easy to install;
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #7
KNACRO 1-Channel 30A High Current 5V Contactor Relay Switch Power Switch DC Power Switching Control Board Module Electrical Relay switches for Cooler Heater Refit Water Heater Control (DC 5V)
Asin: B081ZMGHT7 | Model: 1-Channel 30A Relay Module | PartNumber: 1-Channel 30A Relay Module
30A High Current 12V Contactor Relay Switch Dc Power Switching Control Board;.
Using 9.5Mm Black Fence Terminal, Standard 30A Terminal, Stable And Solid, Reliable Quality..
Using High-Quality Ultra-Small Optocoupler, Anti-Interference Ability, Stable Performance..
Load:Ac 250V 30A,Dc 30V 30A;.
Features
- Input: 5V 12V 24V DC (relay powered);
- Load:AC 250V 30A,DC 30V 30A;
- 30A High Current 12V Contactor relay Switch DC power Switching Control Board;
- Using high-quality ultra-small optocoupler, anti-interference ability, stable performance.
- Using 9.5mm black fence terminal, standard 30A terminal, stable and solid, reliable quality.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #8
KNACRO 5V 1-Channel 10A Relay Module High Low Level Triggering Optocoupler Isolation Load 10A DC 30V AC 250V for PLC Automation Control, Industrial System Control (DC 5V, 1-Channel)
Asin: B07LGY9RY1 | Ean: 0724873026775 | UPC: 724873026775
Working Status Indicator Lights Are Conducive To The Safe Use.
Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control..
4-Channel Relay Interface Board, Which Can Be Controlled Directly By A Wide Range Of Microcontrollers Such As , Avr, Pic, Arm, Plc, Etc. It Is Also Able To Control Various Appliances And Other Equipments With Large Current..
Standard Interface Can Be Directly Connected With Microcontrollers..
Features
- this relay module is 5V active low. Relay output maximum contact is AC 250V 10A and DC 30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Working status indicator lights are conducive to the safe use
- 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as , AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #9
KNACRO SLA-24VDC-SL-C 1 Channel Relay Module DC 24V 30A with optocoupler Isolation Support High Level Low Level (DC 24V)
Asin: B077ZLC78L | Model: 12V 30A With optocoupler isolation | PartNumber: 12V 30A With optocoupler isolation | Ean: 0736364870200 | UPC: 736364870200
Module Voltage 5V, 12V, 24V To Choose From; The Module Can Be Set High Or Low-Level Triggered By Jumper;.
User-Friendly Interface Design, All Interfaces Are Available Through The Wiring Terminal Direct Connection Leads, Very Convenient..
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate; The Power Indicator (Green), Relay State Indicator (Red);.
Smd Optocoupler Isolation, Driving Ability, Stable Performance; Trigger Current 5Ma;.
Features
- Authentic quality module 30A relay, normally open interfaces Maximum load: AC 250V / 30A, DC 30V / 30A;
- SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
- Module voltage 5V, 12V, 24V to choose from; the module can be set high or low-level triggered by jumper;
- Fault-tolerant design, even if the control line is broken, the relay will not operate; the power indicator (green), relay state indicator (red);
- User-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #10
KNACRO SRD-05VDC-SL-C 8-Way 5V Relay Module Free Driver USB Control Switch PC Intelligent Control (5V 8-Channel)
Asin: B07DYNVB38 | Ean: 0736364878022 | UPC: 736364878022
High-Performance Usb Controller Chip, Military Grade Pcb Board Production.
Reserved 4, 8-Way Power Interface, Connected To Power, Even If The Computer Off Or Unplug The Usb From The Computer, You Can Also Relay Remains Set. 1-Way And 2-Way No Power Connector..
5V Relay, The Relay Can Control The Maximum 250V 10A Ac Load And 30V 10A Dc Load..
The Module Uses Hid Technology, Without Any Drivers, Plug And Play. Support Win7/Xp 32/64-Bit Systems, Easy To Use And Simple..
Features
- If you nedd the soft and C++ code to control this device, just contact us on amazon!
- The module uses HID technology, without any drivers, plug and play. Support WIN7/XP 32/64-bit systems, easy to use and simple.
- High-performance USB controller chip, military grade PCB board production
- 5V relay, the relay can control the maximum 250V 10A AC load and 30V 10A DC load.
- Reserved 4, 8-way power interface, connected to power, even if the computer off or unplug the USB from the computer, you can also relay remains set. 1-way and 2-way no power connector.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #11
KNACRO 1 Channel Relay Module DC 24V 30A with optocoupler Isolation Support High-Level Low-Level Triggered
Asin: B01J0KVMEI | Ean: 0713653007967 | UPC: 713653007967
Module Voltage 5V, 12V, 24V To Choose From; The Module Can Be Set High Or Low-Level Triggered By Jumper;.
User-Friendly Interface Design, All Interfaces Are Available Through The Wiring Terminal Direct Connection Leads, Very Convenient..
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate; The Power Indicator (Green), Relay State Indicator (Red);.
Smd Optocoupler Isolation, Driving Ability, Stable Performance; Trigger Current 5Ma;.
Features
- Authentic quality module 30A relay, normally open interfaces Maximum load: AC 250V / 30A, DC 30V / 30A;
- SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
- Module voltage 5V, 12V, 24V to choose from; the module can be set high or low-level triggered by jumper;
- Fault-tolerant design, even if the control line is broken, the relay will not operate; the power indicator (green), relay state indicator (red);
- User-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #12
KNACRO LM2596 DC DC Converter Multi Channel 3.3V 5V 12V ADJ (Vin-1) Adjustable Output Switching Power Supply Step-Down Power Supply Module
Asin: B08YD6BFMC
The Module Belongs To The Step-Down Type Module, The Input Voltage Needs To Be Greater Than The Output Of More Than 1V To Stabilize The Output..
The Maximum Single Circuit Current Of The Module Is 3A, And The Total Current Is Not More Than 5A..
The Output Voltage Of The Module Adj Is Generally Adjustable Within The Range Of About 1V Lower Than The Supply Voltage..
This Module Integrates 4 Lm2596, Which Can Simultaneously Output 3.3V, 5V, 12V, Adj Four Groups Of Power Supply, The Module Layout And Wiring Strictly In Accordance With The Design Specifications Of The Power Circuit;.
Features
- The LM2596 is a step-down power management monolithic integrated circuit switching voltage regulator, capable of outputting 3A of drive current, while having very good linearity and load regulation characteristics.
- This module integrates 4 LM2596, which can simultaneously output 3.3V, 5V, 12V, ADJ four groups of power supply, the module layout and wiring strictly in accordance with the design specifications of the power circuit;
- The module belongs to the step-down type module, the input voltage needs to be greater than the output of more than 1V to stabilize the output.
- The output voltage of the module adj is generally adjustable within the range of about 1V lower than the supply voltage.
- The maximum single circuit current of the module is 3a, and the total current is not more than 5A.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #13
KNACRO 50pcs SLA-05VDC-SL-C 1 Channel Relay Module DC 5V 10A with optocoupler Isolation Support High Level Low Level (DC 5V 10A, 4-Channel)
Asin: B07H52YD1K | Ean: 0724873025549 | UPC: 724873025549
This Module Can Be High Or Low By A Jumper Setting Trigger.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate.
Using Smd Optocoupler Isolation, Driving Ability, Stable Performance; Trigger Current 5Ma.
Features
- This module uses genuine quality relay, normally open interfaces Maximum load: AC 250V/10A, DC 30V/10A
- Using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA
- This module can be high or low by a jumper setting trigger
- Fault-tolerant design, even if the control line is broken, the relay will not operate
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #14
KNACRO 5V 2-Channel Relay Module with Optocoupler Relay Relay Board High Low Trigger with LED Load DC 30V AC 250V 10A for PLC Automation Control, Industrial System Control(DC 5V)
Asin: B077YWH2DC | Ean: 0736364870033 | UPC: 736364870033
Module Operating Voltage:Dc 5V ;.
Fault-Tolerant Design, Even If The Control Line Off, The Relay Will Not Work;.
Module Can Be Set By Jump Cap High Or Low Level Trigger;.
Normally Open Interface Maximum Load: Ac 250V / 10A, Dc 30V / 10A;.
Features
- Using patch optocoupler isolation, drive ability, stable performance; trigger current 5mA;
- Normally open interface Maximum load: AC 250V / 10A, DC 30V / 10A;
- Module operating voltage:DC 5V ;
- Module can be set by Jump cap high or low level trigger;
- Fault-tolerant design, even if the control line off, the relay will not work;
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #15
KNACRO SLA-05VDC-SL-C 1 Channel Relay Module DC 5V 30A with optocoupler Isolation Support High Level Low Level (DC 5V 30A, 1-Channel)
Asin: B0799D6H4L | Model: 5V 30A With optocoupler isolation | PartNumber: 5V 30A With optocoupler isolation | Ean: 0736364873195 | UPC: 736364873195
Module Voltage 5V, 12V, 24V To Choose From; The Module Can Be Set High Or Low-Level Triggered By Jumper;.
User-Friendly Interface Design, All Interfaces Are Available Through The Wiring Terminal Direct Connection Leads, Very Convenient..
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate; The Power Indicator (Green), Relay State Indicator (Red);.
Smd Optocoupler Isolation, Driving Ability, Stable Performance; Trigger Current 5Ma;.
Features
- Authentic quality module 30A relay, normally open interfaces Maximum load: AC 250V / 30A, DC 30V / 30A;
- SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
- Module voltage 5V, 12V, 24V to choose from; the module can be set high or low-level triggered by jumper;
- Fault-tolerant design, even if the control line is broken, the relay will not operate; the power indicator (green), relay state indicator (red);
- User-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #16
KNACRO 2Pcs 5V 1-Channel Relay Module with Optocoupler Relay Relay Board High and Low Trigger with LED Load 10A DC 30V AC 250V for PLC Automation Control, Industrial System Control
Asin: B07J9VHC8D | Ean: 0724873026027 | UPC: 724873026027
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- The Module can be set by jumper high or low trigger.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #17
KNACRO DC 5V 1-Channel Relay Module with Optocoupler Relay Relay Board High and Low Trigger With LED Load 10A DC 30V AC 250V for PLC Automation Control, Industrial System Control(DC 5V 10A, 1-Channel)
Asin: B0786YQFCX | Model: 2699029623 | PartNumber: 2699029623 | Ean: 0736364870347 | UPC: 736364870347
Module Voltage 5V, ; The Module Can Be Set High Or Low-Level Triggered By Jumper;.
User-Friendly Interface Design, All Interfaces Are Available Through The Wiring Terminal Direct Connection Leads, Very Convenient..
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate; The Power Indicator (Green), Relay State Indicator (Red);.
Smd Optocoupler Isolation, Driving Ability, Stable Performance; Trigger Current 5Ma;.
Features
- Authentic quality module 10A relay, normally open interfaces Maximum load: AC 250V / 10A, DC 10V / 10A;
- SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
- Module voltage 5V, ; the module can be set high or low-level triggered by jumper;
- Fault-tolerant design, even if the control line is broken, the relay will not operate; the power indicator (green), relay state indicator (red);
- User-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #18
KNACRO DC-DC USB Charging Module 9V 12V 24V (8V-35v) to 5V 5A 8A 4-USB Port at The Same time Output for Mobile Phones, Digital Cameras, Navigators, Driving Recorder, etc.
Asin: B07H3RH26H | Ean: 0724873025532 | UPC: 724873025532
Dc8-35V Wide Input Voltage, The Input With Reverse Polarity Protection To Maximize The Conversion Efficiency And Reduce Losses. Output With Overvoltage Protection..
High-Quality Double-Plated Gold Usb Port, Life Is 2 Times The Normal Usb.<.
With 4 High-Quality Chip Capacitors, A Large Capacity Mlcc Capacitor, The Output Ripple Is Lower..
Support 4-Channel Usb At The Same Time 2A Current Charging, Fast Charging Current, The Total Output Current Up To 8A..
Features
- Non-isolated synchronous rectification step-down power supply module, 4-Channel independent dedicated charge management IC, can effectively support a variety of mobile phones for maximum charge compatible with Apple / Andrews products
- Support 4-Channel USB at the same time 2A current charging, fast charging current, the total output current up to 8A.
- DC8-35V wide input voltage, the input with reverse polarity protection to maximize the conversion efficiency and reduce losses. Output with overvoltage protection.
- With 4 high-quality chip capacitors, a large capacity MLCC capacitor, the output ripple is lower.
- High-quality double-plated gold USB port, life is 2 times the normal USB.<
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
Weight: 0.08 pounds
See On Amazon #19
KNACRO 12V 2-Channel Relay Module with Optocoupler Relay Relay Board High Low Trigger with LED Load 10A DC 30V AC 250V for PLC Automation Control, Industrial System Control
Asin: B076QF4TM3 | Ean: 0603432623054 | UPC: 603432623054
Module Voltage 12V; The Module Can Be Set High Or Low-Level Triggered By A Jumper;
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate; The Power Indicator (Green), Relay State Indicator (Red);.
User-Friendly Interface Design, All Interfaces Can Connect Directly Through The Terminal Leads, Very Convenient..
Smd Optocoupler Isolation, Driving Ability, Stable Performance; Trigger Current 5Ma;.
Features
- Module using genuine quality relay, normally open interfaces Maximum load: AC 250V / 10A, DC 30V / 10A;
- SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
- Module voltage 12V; the module can be set high or low-level triggered by a jumper;
Fault-tolerant design, even if the control line is broken, the relay will not operate; the power indicator (green), relay state indicator (red); - User-friendly interface design, all interfaces can connect directly through the terminal leads, very convenient.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon
Looking For Something Else?
Search