Buffalo Tools HIT140 Mig Welder 140, Yellow, Black
Asin: B06Y6GRDNR | Model: HIT140 | PartNumber: HIT140 | Ean: 0027077081152 | UPC: 027077081152
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Output Range 20-90 Amps (140A Peak), Advanced Thermal Overload Protection With Indicator Light For Safety, Infinite Heat Settings Provides Maximum Heat Control.
Includes 6 Ft. Mig Torch, Gas Hose Regulator, 10 Ft. Tweco Mig Gun, Mig Nozzle, 2- 0.30 In. Contact Tips, 10 Ft. Ground Cable W/ Earth Clamp, Hex Wrench, Clipping Hammer/Brush And Welding Face Shield.
120V Input, 20-Amps, 60 Hz, Single Phase, 27-Volt No Load, Duty Cycle 20% At 90A.
Plugs Into Standard 120-Volt Outlet, Welds Mild Carbon Steel Up To 24 Gauge Or 3/16 In. Thick In A Single Pass.
Features
- Works with 3 MIG and flux-core wire sizes, 0.23 inch (0.6mm), 0.30 inch (0.8mm) and 0.35inch (0.9mm), with or without shielding Gas
- Plugs into standard 120-Volt outlet, welds mild carbon steel up to 24 gauge or 3/16 in. Thick in a single pass
- Output range 20-90 amps (140A peak), advanced thermal overload protection with indicator light for safety, infinite heat settings provides maximum heat control
- 120V input, 20-amps, 60 Hz, single phase, 27-volt no load, duty cycle 20% at 90A
- Includes 6 ft. MIG torch, Gas hose regulator, 10 ft. Tweco MIG gun, MIG nozzle, 2- 0.30 in. Contact tips, 10 ft. Ground Cable W/ earth Clamp, hex wrench, clipping hammer/brush and welding face shield
- See more on Amazon...
Brand: HIT | Manufacturer: Buffalo Tools
Dimensions: 18.50 x 14.75 x 9.50 inches | Weight: 44.00 Pounds
Warranty: Manufacturer's 90 Day Limited Warranty
See On Amazon Similar To Buffalo Tools HIT140 Mig Welder
#1
HONE Flux Core Welder 110V, Actual 140Amp MIG Welder 3 in 1 Synergic Gasless Wire Welder/Stick Welder/Lift TIG Welding Machine, IGBT Inverter with Large LED Display and 2lb Welding Wire.
Asin: B0CQ4DMP8X | Model: FC140 | PartNumber: FC140
➠【𝐒𝐦𝐚𝐫𝐭 𝐒𝐭𝐢𝐜𝐤 𝐖𝐞𝐥𝐝】Bulit-In Smart Hot-Start And Arc-Force Provide Easy, Quick And Reliable Arc Start, And Stable Welding Current, This Welder Equipment Is Ideal For The E6013, E6011, E6010, E7018 And E308-16 Etc Rods..
➠【𝐏𝐞𝐫𝐟𝐞𝐜𝐭 𝐟𝐨𝐫 𝐒𝐦𝐚𝐥𝐥 𝐖𝐞𝐥𝐝 𝐏𝐫𝐨𝐣𝐞𝐜𝐭𝐬】Only Weighs 10.1 Lbs, Easy To Carry With A Handle Or Shoulder Strap(Included), Very Suitable For Outdoor Maintenance, Farm, Road Equipment, And Home Diy..
➠【𝐒𝐚𝐟𝐞 𝐚𝐧𝐝 𝐒𝐭𝐚𝐛𝐥𝐞】This Welder 3 In 1 Built-In Automatic Anti-Stick, Compensation For Voltage Fluctuation, Over Current Protection, Over Heat Protection, Short Circuit Damage Protection, To Make Sure The Welding Kit Safely Operation And Long Life..
➠【𝐖𝐢𝐝𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧】The Wire Feed Welder Is Capable Of Welding All Kinds Of Ferrous Metals Such As Medium Carbon Steel, Mild Steel, Fence, Automotive Exhaust Pipe, Stainless Steel And Cast Iron..
➠【𝐋𝐢𝐟𝐭 𝐓𝐈𝐆 𝐖𝐞𝐥𝐝】Just Touch The Tungsten Rod To The Workpiece And Lift Off, Easily Arc Starting, Don't Need To Scratch It, It's Like You Getting A Tig Portable Welder For Free. (Need To Buy Extra Tig Lift Torch, Not Included In The Product)..
➠【𝐄𝐚𝐬𝐲 𝐭𝐨 𝐔𝐬𝐞】Has Simple Control With Two Knobs For Wire Speed And Voltage, Make It More Efficient To Operate And Provide Smoother Weld Characteristics Compared To Traditional Mig Welder Machine 110V..
Features
- Flux welder with Stick and Lift TIG function is up to 140 Amp output allows you to weld mild steel plate up to 1/4 inch; Suitable for .030" & .035" flux core wire.
- Has simple control with two knobs for wire speed and voltage, make it more efficient to operate and provide smoother weld characteristics compared to traditional mig welder machine 110V.
- Bulit-in smart Hot-start and Arc-force provide easy, quick and reliable arc start, and stable welding current, this welder equipment is ideal for the E6013, E6011, E6010, E7018 and E308-16 etc rods.
- Just touch the tungsten rod to the workpiece and lift off, easily arc starting, don't need to scratch it, it's like you getting a TIG portable welder for free. (need to buy extra tig lift torch, not included in the product).
- This welder 3 in 1 built-in automatic Anti-stick, compensation for voltage fluctuation, over current protection, over heat protection, short circuit damage protection, to make sure the welding kit safely operation and long life.
- The wire feed welder is capable of welding all kinds of ferrous metals such as medium carbon steel, mild steel, fence, automotive exhaust pipe, stainless steel and cast iron.
- Only weighs 10.1 lbs, easy to carry with a handle or shoulder strap(included), very suitable for outdoor maintenance, farm, road equipment, and home DIY.
- See more on Amazon...
Brand: HONE | Manufacturer: HONE
Dimensions: 14.00 x 5.80 x 7.69 Inches
See On Amazon #2
AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)
Asin: B0B6HL28ZP | Model: MIG200F | PartNumber: MIG200F
Gas/Gasless Welding: You Can Choose Flux Core Wire(Gasless) Or Solid Wire(Gas). This Welder Can Handle 2 Lb And 10 Lb Rolls Of Wire 0.8Mm~1.0Mm Flux Core Wire/Solid Wire, Max Welding Thickness 8.0Mm..
Powerful And Safe Machine:This 200A Welding Machine Can Weld Mild Up To 8.0Mm Plate,Equipped With Overload And Overheating System,Feel Free To Use,It’S Very Safe..
Lift Tig/Arc Welding: Lift Tig Available,Tig Torch Fits Wp17v, Not Included In The Package.Tig Welding Thickness 1.0Mm-8.0Mm, Suitable For Thin Work-Pieces Such As Stainless Steel, Alloy Steel, Carbon Steel Etc.Arc Welding Fits Rods E6013..
Synergic Control: Adjusting The Amperage Or Choosing Different Wire Thicknesses,The Voltage And Wire Feeding Speed Will Automatically Change.Even A Beginner Can Easily Use It..
Features
- 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose.
- Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it.
- Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 8.0mm.
- Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 1.0MM-8.0MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E6013.
- Powerful And Safe Machine:This 200A Welding machine can weld mild up to 8.0mm plate,equipped with overload and overheating system,feel free to use,it s very safe.
- See more on Amazon...
Brand: AZZUNO | Manufacturer: AZZUNO
Dimensions: 0.13 x 0.19 x 0.10 inches | Weight: 23.81 Pounds
See On Amazon #3
TOOLIOM 200M MIG Welder 3 in 1 Flux MIG/Solid Wire/Lift TIG/Stick Welder 110 / 220V Dual Voltage Welding Machine
Asin: B08C9J3PS2 | Model: TL-200M | PartNumber: TL-200M | Ean: 0630128776565 | UPC: 630128776565
Powerful Machine: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0Mm) Plate..
Dual Voltage Input Design: Welding Machine Can Be Plugged Into 110（120）V / 220(230)V Dual Voltage (Automatic Fitting)..
Big Enough To Apply To 2 And 10 Pounds Rolls Of Wire. Ready To Feed .030"(0.8Mm) With Solid Core Wire, And .035" (0.9Mm)With Flux Core Wire.Can Handle E7018 Basic Electrode..
Multi-Functions In One Machine: Suitable For Stick, Lift Tig(Torch Is Not Included), Flux Mig, Gas Mig.
Features
- Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
- Multi-functions in one machine: Suitable for stick, lift TIG(torch is not included), flux MIG, gas MIG
- Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
- Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030(0.8mm) with solid core wire, and .035 (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
- Dual voltage input design: Welding machine can be plugged into 110 120 V / 220(230)V dual voltage (Automatic fitting).
- See more on Amazon...
Brand: TOOLIOM | Manufacturer: TOOLIOM
See On Amazon #4
AZZUNO 135 Amp MIG Welder, 3 in 1 Multiprocess Welder 110V Flux Core Welder Flux MIG/Lift TIG/Stick Welding Machine Synergic Control IGBT Inverter Welder (volts, 110)
Asin: B0BJCH12TM | Model: A10 | PartNumber: A10
Weld Up To .030"(0.8Mm) And .035" (0.9Mm)With Flux Core Wire..
This Flux Core Welder Fits .030"(0.8Mm) &. 035" (0.9Mm) Flux Core Wire. Arc Mode Fits Rods: E6013..
Our Customer Service Is Online All The Time,Please Contact Us If You Have Any Question..
Powerful And Safe Machine:This 135A Welding Machine Can Weld Mild Up To 3.0Mm Plate,Equipped With Overload And Overheating System,Feel Free To Use,It’S Very Safe..
Multi-Functions In One Machine: Suitable For Mma, Lift Tig, Flux Mig.(Lift Tig Torch Is Not Included).
Features
- Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
- Multi-functions in one machine: Suitable for MMA, Lift TIG, flux MIG.(Lift tig torch is not included)
- Weld up to .030(0.8mm) and .035 (0.9mm)with flux core wire.
- Powerful And Safe Machine:This 135A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it s very safe.
- This Flux Core Welder fits .030(0.8mm) &. 035 (0.9mm) flux core wire. ARC mode fits rods: E6013.
- Our customer service is online all the time,please contact us if you have any question.
- See more on Amazon...
Brand: AZZUNO | Manufacturer: AZZUNO
See On Amazon #5
MIG Welder, 145Amps MIG145 Gas Gasless Flux Core MIG Welder/Lift TIG/Stick 3 in 1 Synergic MIG Welding Machine,110V 220V Flux Welder with Digital Screen Display
Asin: B0CRR78HM7 | Model: MIG145-1122 | PartNumber: MIG145-1122 | Ean: 0727431700704 | UPC: 727431700704
Synergic Control: The 3 In 1 Welder Adopts Igbt And Integrated Wire Feed Technology To Automatically Match The Recommended Voltage And Wire Feed Speed (Current). At The Same Time, The User Can Also Press The Adjustment Knob To Individually Adjusted The Voltage±3V, Making It Accessible To Both Beginners And Professionals..
Portable & Powerful: The Mig Welder Weighs Just 13.7 Pounds And Comes With A Shoulder Strap For Easy Carrying And Outdoor Use. Package Includes 1×Mig145 Mig Welder Machine, 1×Mig Torch, 1×Earth Clamp, 1×Stick Holder, 1×0.040" Flux Cored Wire, 1×0.030" Solid Wire, 1×0.030"/0.035"/0.040" Contact Tip, 1×0.030"/0.035" Wire Feed Rollers, 1×2 Meters Gas Hose, 1×220V To 110V Wire Adapter, 1×Shoulder Strap, 1× User Manual..
110/220V Dual-Voltage: The Gasless Mig Welder Supports 110/220V Dual Voltage, Automatically Identifying The Input Voltage, And Clearly Display Through The Front Panel Indicator. This Design Enables The Mig Welder To Work Seamlessly In Different Power Environments, Providing Greater Convenience And Applicability..
Digital Screen Display: We Design This Mig Welding Machine With Full New Technology. Mig Welder 110V/220V With Led Digital Screen Display Voltage, Current, And Other Parameters. You Do Not Need To Remove The Helmet To Assess The Equipment Status. You Can Make Real-Time Adjustments, Enhancing Efficiency And Accuracy..
Features
- 3-IN-1 welder: The MIG145 MIG welder has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The flux core welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
- Digital Screen Display: We design this MIG welding machine with full new technology. MIG welder 110v/220v with LED digital screen display voltage, current, and other parameters. You do not need to remove the helmet to assess the equipment status. You can make real-time adjustments, enhancing efficiency and accuracy.
- Synergic Control: The 3 in 1 welder adopts IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, the user can also press the adjustment knob to individually adjusted the voltage 3V, making it accessible to both beginners and professionals.
- 110/220V Dual-Voltage: The gasless mig welder supports 110/220V dual voltage, automatically identifying the input voltage, and clearly display through the front panel indicator. This design enables the MIG welder to work seamlessly in different power environments, providing greater convenience and applicability.
- Portable & Powerful: The MIG welder weighs just 13.7 pounds and comes with a shoulder strap for easy carrying and outdoor use. Package includes 1 MIG145 MIG welder machine, 1 MIG torch, 1 Earth clamp, 1 Stick holder, 1 0.040 Flux cored wire, 1 0.030 Solid wire, 1 0.030/0.035/0.040 Contact tip, 1 0.030/0.035 Wire feed rollers, 1 2 meters gas hose, 1 220V to 110V Wire adapter, 1 Shoulder strap, 1 User manual.
- See more on Amazon...
Brand: bestarc | Manufacturer: bestarc
See On Amazon #6
SSIMDER MIG Welder 140A 2 in 1 Stick/Flux Core Welder 110V/220v Dual Voltage Welding Machine with Flux Cored Wire MIG/ARC Welder IGBT Inverter Welder
Asin: B09JYNTZ3Q | Model: mig-140 | PartNumber: mig-140
【Easy To Operate】The Flux Core Welding Machine Is A Super Easy To Operate 2-In-1 Welder That Can Effectively Handle Iron And Carbon Steel Welding Tasks With Flux Cored Wire Sizes Of 0.030" And 0.035", You Can Set The Current Range According To The Thickness And Characteristics Of The Material, And An Arc Mode That Supports Welding Of E7018 And E6013 Electrodes..
【Complete Welding Kit For Easy Use】In Addition To The Mig Welder, This Package Includes A Mig Torch, Electrode Holder, Ground Clamp, 110V/220V Adapter, And Other Accessories, Making It Easy To Use And Get Started With Welding. With Everything You Need To Start Welding, You Can Save Time And Money By Avoiding The Need To Purchase Additional Accessories Separately..
【Versatile Welding For Various Applications】Our Mig Welder Can Weld Iron, Carbon, Steel, And Other Materials, Making It An Excellent Choice For Household Welding, Diy Projects On Steel, And Other Welding Applications That Require A Mig Welder. With Its Multi-Application Capabilities, You Can Use It For Welding, Fabrication, Repair, And More..
【Beginner-Friendly And Efficient】This Mig Welder Is Perfect For Beginners Who Are Looking For An Easy-To-Use Welding Machine. With Its Synergic Mode, The Voltage Is Automatically Adjusted By Regulating The Current, Making It Incredibly Easy To Operate And Start. Plus, Its Advanced Igbt & Inverter Technology Ensures Efficient And Portable Welding, So You Can Take It Anywhere You Need To Weld..
Features
- 2 in 1 Stick/MIG Welder Get the best of both worlds with this versatile welding machine that supports both MIG and ARC welding. It delivers up to 145Amp DC output and is designed for dual voltage operation, compatible with 110v/220v input. Whether you need to weld thick steel plates or thin sheet metal, this welder is up for the job.
- Beginner-Friendly and Efficient This MIG welder is perfect for beginners who are looking for an easy-to-use welding machine. With its Synergic mode, the voltage is automatically adjusted by regulating the current, making it incredibly easy to operate and start. Plus, its advanced IGBT & Inverter technology ensures efficient and portable welding, so you can take it anywhere you need to weld.
- Easy to operate The flux core welding machine is a super easy to operate 2-in-1 welder that can effectively handle iron and carbon steel welding tasks with flux cored wire sizes of 0.030 and 0.035, you can set the current range according to the thickness and characteristics of the material, and an ARC mode that supports welding of E7018 and E6013 electrodes.
- Versatile Welding for Various Applications Our MIG welder can weld iron, carbon, steel, and other materials, making it an excellent choice for household welding, DIY projects on steel, and other welding applications that require a MIG welder. With its multi-application capabilities, you can use it for welding, fabrication, repair, and more.
- Complete Welding Kit for Easy Use In addition to the MIG welder, this package includes a MIG Torch, Electrode holder, Ground clamp, 110v/220v adapter, and other accessories, making it easy to use and get started with welding. With everything you need to start welding, you can save time and money by avoiding the need to purchase additional accessories separately.
- See more on Amazon...
Brand: S SIMDER | Manufacturer: S SIMDER
See On Amazon #7
Mig Welding gun accessory 0.030" kit for Lincoln Magnum 100L Tweco Mini/#1 Mig gun: 20pcs Contact Tips 11-30 0.030" + 2pcs gas nozzles 21-50 1/2" + 2pcs 35-50 welding diffuse
Asin: B07D7PNDRW | Ean: 0663577372040 | UPC: 663577372040
Fits For Tweco Mini/#1 And Lincoln Magnum 100L K530 Series Mig Welding Guns.
Including:20Pcs Contact Tips 11-30 0.030" + 2Pcs Gas Nozzles 21-50 1/2" + 2Pcs 35-50 Welding Diffuser.
Features
- Mig Welding gun accessory 0.030" kit tip-nozzle-diffuser with contact tip,gas nozzle,gas diffuser for Lincoln Magnum 100L & Tweco Mini/#1.
- Including:20pcs Contact Tips 11-30 0.030 + 2pcs gas nozzles 21-50 1/2 + 2pcs 35-50 welding diffuser
- Fits for Tweco Mini/#1 and Lincoln Magnum 100L K530 series Mig welding guns
- See more on Amazon...
Brand: Zinger | Manufacturer: Zinger
See On Amazon #8
HZXVOGEN 110V MIG Welder 200A Flux Core Welder 3 in 1 Gasless MIG Welder/Lift TIG/Stick Welding Machine Portable IGBT Inverter Large LED Display Automatic Wire Feeding Welder Machine
Asin: B0CCR1JW7Q | Model: HVM200-Pro | PartNumber: HVM200-Pro
【Reliable Performance】: This Mig Gasless Welder Machine Will Automatically Control Voltage And Current To Achieve A Smooth Arc By Synergy Fuction,Best Ideal For Welding Beginner. The Built-In Overheating And Overcurrent Protection System And The Fan Cooling System Will Keep Dust And Dirt Out, Thus Extending The Life Of The Machine..
【Purchase With 100% Confidence】: The Welder Comes With 2 Year Warranty. If You’Re Not Satisfied With Your Welder, Please Contact Us. Faulty Welders Can Also Be Replaced Within 60 Days. Arrives 1 To 5 Days After The Order Is Placed..
【Portable Design】: The Wire Feed Welder Weighs Only 10 Lbs/5.2 Kg. Size: 13.38*9.45*8.66Inch. The Split Torch Is Easy To Set Up And Transport, Allowing You To Move Around. What You Get: 1X Mig Torch, 1 X Ground Clamp, 1 X Welding Holder, 1* Flux Cored Wire, 1 X Slag Hammer, 4 X Tip Nozzles, 5 X Welding Rod, 1 X Instruction Manual..
【Easy To Use】: The Welding Machine Is Designed As A Single-Knob Intelligent Control System, Coordinating The Speed And Current Of The Wire Feeder. The Precise Digital Display Guides Your Welding Work And Provides A Perfect Weld..
Features
- 3 IN 1 FLUX CORE WELDER : HZXVOGEN HVM200 MIG welder supports flux core gasless MIG/Lift TIG/MMA(Note: Need to buy extra Lift tig torch). Release gas hard conditions, perfect for use with flux cored wire (for 0.030/0.032/0.035" flux cored wire) and compatible with 1.0 to 2.5 conventional electrodes, good for welding metal parts up to 5.0mm.
- EASY TO USE : The welding machine is designed as a single-knob intelligent control system, coordinating the speed and current of the wire feeder. The precise digital display guides your welding work and provides a perfect weld.
- RELIABLE PERFORMANCE : This mig gasless welder machine will automatically control voltage and current to achieve a smooth arc by synergy fuction,best ideal for welding beginner. The built-in overheating and overcurrent protection system and the fan cooling system will keep dust and dirt out, thus extending the life of the machine.
- PORTABLE DESIGN : The wire feed welder weighs only 10 lbs/5.2 kg. Size: 13.38*9.45*8.66inch. The split torch is easy to set up and transport, allowing you to move around. What you get: 1X mig torch, 1 X ground clamp, 1 X welding holder, 1* flux cored wire, 1 X slag hammer, 4 X tip nozzles, 5 X welding rod, 1 X instruction manual.
- PURCHASE WITH 100% CONFIDENCE : The welder comes with 2 year warranty. If you re not satisfied with your welder, please contact us. Faulty welders can also be replaced within 60 days. Arrives 1 to 5 days after the order is placed.
- See more on Amazon...
Brand: H HZXVOGEN | Manufacturer: H HZXVOGEN
Dimensions: 8.00 x 14.00 x 10.00 inches
See On Amazon #9
Lincoln Electric 90i MIG and Flux Core Wire Feed Weld-PAK Welder, 120V Welding Machine, Portable w/Shoulder Strap, Protective Metal Case, Best for Small Jobs, K5256-1
Asin: B0BTMVVG35 | Model: K5256-1 | PartNumber: K5256-1 | Ean: 0015082986227 | UPC: 015082986227
Light & Portable: Ideal For Maintenance And Mobile Welders, Thanks To Its Small And Lightweight (15 Lbs) Inverter Design And Shoulder Strap For Portability; A Good Choice For Professionals But It’S An Easy To Use Welder For Beginners Too.
Perfect For Small Weld Jobs: This Machine Is Best For Diy Projects, Hobbyists, Home Repairs And More; Infinite Welding Voltage Allows Fine-Tuning Of Weld Characteristics.
Smooth & Easy Operation: Has Simple Control With Two Knobs For Wire Speed And Voltage; Inverter Power Source Makes It More Efficient To Operate And Provides Smoother Weld Characteristics Compared To Traditional Welders.
Accessories Included: The Machine Comes With A Full List Of Accessories Including A Welding Gun, Nozzle, Contact Tip, Work Cable And Clamp; Metal Case Provides Protection From The Elements.
Features
- WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4 max thickness) or solid MIG wire (3/16" max thickness)
- ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
- LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but it s an easy to use welder for beginners too
- SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
- PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
- See more on Amazon...
Brand: Lincoln Electric | Manufacturer: Lincoln Electric
Dimensions: 19.00 x 14.00 x 9.00 inches | Weight: 16.00 Pounds
Warranty: 1 year
See On Amazon #10
YESWELDER MIG Welding Gun Kit .035" Tip-Nozzle-Diffuser for Lincoln Magnum 100L and Tweco Mini/#1 (.035" Accessory Kit)
Asin: B07QVJ76Y7 | Ean: 0768563619793 | UPC: 768563619793
2-Pcs Gas Nozzles 21-50 (1/2"), 20-Pcs Contact Tips 11-35 (0.035") And 2-Pcs Gas Diffusers 35-50..
Please See All Listed Pictures To Check Your Mig Gun Details For Part Compatibilit.
Fits Lincoln Magnum 100L (K530 Series) & Tweco Mini/#1 Mig Welding Gun Or Equivalents.
Features
- MIG welding gun accessory kit tip-nozzle-diffuser for Lincoln Magnum 100L & Tweco Mini/#1
- Fits Lincoln Magnum 100L (K530 series) & Tweco Mini/#1 MIG welding gun or equivalents
- 2-pcs gas nozzles 21-50 (1/2), 20-pcs contact tips 11-35 (0.035) and 2-pcs gas diffusers 35-50.
- Please see all listed pictures to check your MIG gun details for part compatibilit
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
See On Amazon #11
RUBIK MIG Welder, 140A Welding Machine, 110V MIG/LIFT TIG/STICK 3 in 1 Welder Machine, Flux Core Welder, Portable Gasless MIG Welding Machine, Digital Display IGBT Inverter Welder with Welding Wire
Asin: B0BHVZT8VZ | Model: MIG-140 | PartNumber: MIG-140
★【Wire Feeder & Advanced Igbt Technology】Our Mig Welder 110V Adopts The Most Advanced Igbt Inverter Technology With Unique Control Mode, Which Can Further Improves The Reliability Of Welding Machine. Also, Synergic Adjustment Function (Software Control) Allows The Automatic Change Of The Voltage & Wire Feeding Speed By Adjusting The Amperage Or Choosing Different Thicknesses. It Is The Perfect Entry-Level Welder Choice. Feeding Speed Range: Dia 0.8Mm:16.4-52.4Ft/Min, Dia 1.0Mm:12 - 32.8Ft/ Min. Mig Welding Wire Availabe Weight: 2.2Lbs/1 Kg..
★【What Come With Machine】Package Content: 1 X 3 In 1 Mig Welding Machine, 1 X Mig Welding Torch, 1 X Ground Clamp With Cable, 1 X Electrode Holder With Cable, 1 X Welding Helmet, 1 X Steel Brush, 1 X 0.04"(1.0Mm) Flux Core Wire(1.1Lbs), 5 X Contact Tips, 1 X User Manual. This Gasless Mig Welder Is Ideal For Outdoor Repairs, Rusty Metal, Road Equipment Maintenance And Diy Use..
★【Safely And Portable Design】Mig Welding Machine Has A Built-In Protection Device That The Welders Will Automatically Turn Off When Overheated Or The Voltage And Current Exceed Their Range To Make Sure Safely Operation. This Flux Core Welder Will Keep You And Your Welder Safe. This Welding Machine With Fan Cooling System, Fan Will Works When Needed. The Size Of Welders 11.2" X 5.9" X 7", Lightweight 7.5 Lbs, With A Portable Folding Handle, Easy To Install And Store..
★【More Powerful Welder】The Flux Core Welder Supports Gasless Welding For Protecting The Welding Beads. Gasless Mig Welder Machine Can Use 0.03"(0.8Mm) & 0.04" (1.0Mm) Flux Core Wire. The User Easy To Find This Kind Of Flux Core Wire On Amazon. This Welder Is 110V, Machine Will Auto Indicate The Voltage, Up To 140A Output Current. Suitable For All Kinds Of Welding Requirements. This Welding Machine Comes With Lcd Display Is Clear And Easy To Read..
Features
- High-performing 3 in 1 MIG welder Our MIG welder machine has FLUX MIG, MMA and Lift TIG mode. Welder Machine can weld iron, carbon steel, square pipe, and other metal materials. The welder provide the powerful arc force, stable current, little splash, deeper penetration, good shaping and efficient welding. Anti-Stick preset in machine. (Note:Need to buy extra lift tig torch,not included inside product) Can be used as Father's Day gift.
- More powerful welder The flux core welder supports gasless welding for protecting the welding beads. Gasless MIG welder machine can use 0.03(0.8mm) & 0.04 (1.0mm) flux core wire. The user easy to find this kind of flux core wire on amazon. This welder is 110V, machine will auto indicate the voltage, up to 140A output current. Suitable for all kinds of welding requirements. This Welding machine comes with LCD display is clear and easy to read.
- Wire feeder & advanced IGBT technology Our mig welder 110v adopts the most advanced IGBT inverter technology with unique control mode, which can further improves the reliability of welding machine. Also, Synergic Adjustment Function (software control) allows the automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. It is the perfect entry-level welder choice. Feeding speed range: Dia 0.8mm:16.4-52.4ft/min, Dia 1.0mm:12 - 32.8ft/ min. MIG welding wire availabe weight: 2.2lbs/1 kg.
- Safely and portable design Mig welding machine has a built-in protection device that the welders will automatically turn off when overheated or the voltage and current exceed their range to make sure safely operation. This flux core welder will keep you and your welder safe. This welding machine with fan cooling system, fan will works when needed. The size of welders 11.2 x 5.9 x 7, lightweight 7.5 lbs, with a portable folding handle, easy to install and store.
- What come with machine Package Content: 1 x 3 in 1 Mig welding machine, 1 x Mig welding torch, 1 x ground clamp with cable, 1 x electrode holder with cable, 1 x welding helmet, 1 x steel brush, 1 x 0.04(1.0mm) flux core wire(1.1lbs), 5 x contact tips, 1 x user manual. This gasless mig welder is ideal for outdoor repairs, rusty metal, road equipment maintenance and DIY use.
- See more on Amazon...
Brand: Rubik | Manufacturer: RUBIK
Dimensions: 7.00 x 11.20 x 5.90 inches | Weight: 7.50 Pounds
See On Amazon #12
S7 200Amp MIG Welder,110V&220V 4 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine
Asin: B0B1RN53PR | Model: MIG | PartNumber: MIG
🔔【Complete Welding Kit】Includes Mig Gun(2.8M), Ground Clamp And Holder (2M), 220V To 110V Adapter, Drive Roller Wheel, Contact Tips, Gass Nozzles, And Welder Operation Manual. Processes Recommended For Mig-Cast Iron, Copper, Brass, Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron, Copper, Brass, Titanium..
🔔【Safety Features】Automatic Protection Function For Over-Current, Over-Voltage, And Over-Heating..
🔔【Intuitive Synergic Design】Synergic Control With Automatic Change Of The Voltage & Wire Feeding Speed By Adjusting The Amperage Or Choosing Different Thicknesses. The Mig-200 Is Capable Of True Lift Tig (Tig Lift Torch Not Included) Welding As Well As Stick Welding..
🔔【Powerful Welding Capability】Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0Mm) Plate.Max 5 Pound Rolls Of Wire.030"(0.8Mm) With Solid Core Wire, And .035" (0.9Mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
Features
- Multi-Function Welding Machine IGBT Full 20-200Amp(Max) with Digital Display for reliable quality and stable performance. Suitable for MMA, Lift TIG, Flux MIG, and Gas MIG. Big enough to handle 2 to 5 pound rolls of wire.
- Powerful Welding Capability Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5 Pound Rolls Of Wire.030(0.8mm) With Solid Core Wire, And .035 (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode
- Complete Welding Kit Includes MIG Gun(2.8M), Ground Clamp and Holder (2M), 220V to 110V Adapter, Drive Roller Wheel, Contact Tips, Gass Nozzles, and Welder Operation Manual. Processes recommended for MIG-Cast Iron, Copper, Brass, Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron, Copper, Brass, Titanium.
- Intuitive Synergic Design Synergic Control with automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. The MIG-200 is capable of true lift TIG (TIG Lift Torch not included) welding as well as stick welding.
- Safety Features Automatic protection function for over-current, over-voltage, and over-heating.
- See more on Amazon...
Brand: S7 | Manufacturer: win-win
See On Amazon #13
MIG Welding Gun Torch 100Amp 10ft Replacement for Lincoln Magnum 100L K530-6,Fits Lincoln Mig Gun SP/Power MIG 140T 180T,Easy-Core/Pro-MIG/MIG Pak 140 180
Asin: B09NKC5MS5 | Model: Contact Tips-035 | PartNumber: Contact Tips-035 | Ean: 0752771083873 | UPC: 752771083873
Fitment:This Mig Gun Can Be Found On Lincoln Welders Such Sp-140T,Sp-180T + Mig Pak 140, Mig Pak 180 + Pro-Mig 140, Pro-Mig 175 Pro-Mig 180 + Weld-Pak 125, Weld-Pak 125Hd,Weld-Pak 140Hd + Power Mig 140T, Power Mig 180C,Power Mig 180T + Easy-Core 140, Easy Core 180 Etc.
Package Includes:1Pcs Lincoln Magnum 100L K530-6 Replacement Mig Welding Gun Torch+ 1Pcs 11-30 .030” Diameter Mig Tip In The Welding Gun + 1Pcs Gas Nozzles 21-50 1/2" In The Torch Gun.
Uses Same Mig Gun Consumables As Lincoln/Tweco: 11 Series Mig Tips(11-30 .30”,11-35 .035” Etc) , Feed .030-.035 Diameter Welding Wire.
Compatible With Lincoln Magnum 100L K530-6 100Amp Mig Welder Gun Stinger Torch With 10Ft(3M)Cable.
Features
- Premium Quality Lincoln Magnum 100L K530-6 Replacement MIG Welding Gun Torch 100Amp 10' (3m)k530-6
- Compatible with Lincoln Magnum 100L K530-6 100Amp MIG welder gun stinger torch with 10ft(3m)cable
- Fitment:This Mig gun can be found on Lincoln welders such SP-140T,SP-180T + MIG Pak 140, MIG Pak 180 + Pro-MIG 140, Pro-MIG 175 Pro-MIG 180 + Weld-Pak 125, Weld-Pak 125HD,Weld-Pak 140HD + Power Mig 140T, Power Mig 180C,Power Mig 180T + Easy-Core 140, Easy Core 180 etc
- Uses same MIG Gun consumables as Lincoln/Tweco: 11 series mig tips(11-30 .30 ,11-35 .035 etc) , feed .030-.035 diameter welding wire
- Package includes:1PCS Lincoln Magnum 100L K530-6 Replacement MIG Welding Gun Torch+ 1PCS 11-30 .030 diameter mig tip in the welding gun + 1pcs gas nozzles 21-50 1/2 in the torch gun
- See more on Amazon...
Brand: OKBA | Manufacturer: OKBA
See On Amazon #14
YESWELDER MIG-250 PRO Aluminum MIG Welder, 250Amp 220V, Gas MIG Gasless Flux Core Welding Machine MIG/Lift TIG/Stick 4 in 1 Welder, Spool Gun Compatible
Asin: B08CBCB4M5 | Model: MIG-250 PRO | PartNumber: MIG-250 PRO
[Gasless Flux Mig Weld] Release Hard Moving Of Gas Cylinder, Release The Low Efficiency Of Stick Welds, And Work With Gasless Flux Wire Perfectly..
[Various Welding Wire] Suitable For All Kinds Of Welding Requirements .023”/.030”/.035” Solid/Ss Wire, .023”/.030”/.035” Flux Core Wire For Mig Manual Setting; Only .035” Available In Mig Synergistic Setting .035”/.045” Aluminum Wire..
[Synergic Mig] Provides Communication Between The Power Source, Feeder, And Gun. Easy Work With Hobbyists Or Professionals,.
Features
- [MULTI-FUNCTIONS] 4 in 1 Welder, MIG synergistic setting & MIG manual setting, Gasless Flux wire MIG Welds, stick welds, and Lift TIG welds. Dynamic control-set arc control to crisp or soft depending on your preference and application. (TIG torch and SPOOL GUN need to be purchased separately, WP-17V-35, LBT150)
- [SYNERGIC MIG] Provides communication between the power source, feeder, and gun. Easy work with hobbyists or professionals,
- [GASLESS FLUX MIG WELD] Release hard moving of gas cylinder, release the low efficiency of stick welds, and work with gasless flux wire perfectly.
- [VARIOUS WELDING WIRE] Suitable for all kinds of welding requirements .023 /.030 /.035 solid/SS wire, .023 /.030 /.035 flux core wire for MIG manual setting; only .035 available in MIG synergistic setting .035 /.045 aluminum wire.
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
See On Amazon #15
Forney Easy Weld 261, 140 FC-i Welder, 120V, Green
Asin: B07CP9CDVQ | Model: 261 | PartNumber: 261 | Ean: 0032277002616, 6093800585543 | UPC: 032277002616
Portable Welder- Lightweight 19 Lbs. Easily Carried To Any Do-It-Yourself, Maintenance, Repair, Metal Fabrication And Hobbyist Project.
Recommended Accessories- Contact Tips (60170, 60171 And 60172),Welding Nozzles: (85336 And 85337), Diffuser: (85339), Flux Core Mig Wire: (42300 And 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031).
Click On The (By Forney) Name Above In Blue Under The Title To View Our Full Catalog Of Welders, Abrasives, Chain/Wire Rope, Tools And More!.
Welder Includes- 8' Mig Gun, 8' Ground Clamp, Integrated Handle With Torch Wrap And A 20A-15A Adapter. Backed By A 12-Month Warranty.
Product Specifications- Dimensions: 16.75" (425.45 Millimeters) X 8.125" (206.38 Millimeters) X 12" (304.8 Millimeters), Weight: 19 Lbs. (8.62 Kilograms), Gasless/Flux-Core Welding Only, Portable, Torch Wrap, Infinite Voltage And Wire Feed Speed Control, 120-Volt Input, 140 Amp Output, Welds Up To 1/4 In. (6.35 Millimeters), Handles .030 In. Or 0.35 In. Wire, Includes: 8' Mig Gun, 8' Ground Clamp And 20A - 15A Adapter, Duty Cycle 30% @ 90A.
Rugged- All Metal Case, Built To Take The Day To Day. Big Enough To Handle 2 And 10 Pound Rolls Of Wire.
Powerful- Up To 140 Amp Output That Allows You To Weld Mild Steel Up To 1/4 In Plate.
Features
- EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
- POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
- PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
- RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire
- WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty
- PRODUCT SPECIFICATIONS- Dimensions: 16.75 (425.45 millimeters) x 8.125 (206.38 millimeters) x 12 (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A
- RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031)
- Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!
- See more on Amazon...
Brand: Forney | Manufacturer: FORNEY INDUSTRIES INC
Dimensions: 8.10 x 16.70 x 12.00 Inches | Weight: 19.00 pounds
Warranty: 12 month
See On Amazon #16
HITBOX MIG Welder 110V 200A Flux Core Welder Gasless MIG/Lift TIG/Stick 3 in 1 Portable Welding Machine Inverter Welder IGBT Wire Feed Welder with LED Digital Display Multiprocess Welder HBM200
Asin: B0B8YHJ4YD | Model: HBM200 | PartNumber: HBM200
【Safety Protection】 Hitbox Flux Core Welding Machine Has Built-In Overcurrent, Overvoltage And Overheating Protection. The Welding Equipment Will Automatically Shut Down In Case Of Overheating And Overload. The Fan Cooling System In Operation Reduces Dust Entering The Machine And Extends Its Service Life.
【Professional Services】Hitbox Offer 2-Year Warranty.If You Are Not Satisfied With Your Purchase, Please Feel Free To Consult Our Customer Service Team Through The Order Number. Trust Our High Quality And Unique Customer Service..
【Package Content】Hitbox Inverter Welder Includes Welding Accessories: 1X Mig Welding Machine, 1X Split Welding Gun, 1 X Electrode Holder, 1X Grounding Clamp, 1X Brush, 2X Nozzles, 1X 0.5Kg Flux Wire..
【Adjustable Welding Speed】 Hbm200 Display Rated Output Current: 200A（. Output Current Range: 30-200A. Duty Cycle: 30%-140 A At 40°C. The Welder Has A Current Adjustment Button; Adjust The Current Variable Feed Control To Perfectly Manage Flux Cored Welding Of Thin Steel, Stainless Steel Or Even Thicker Steel. Note: The Actual Welding Current Effect Is 140A..
Features
- Synergy & Compact HITBOX MIG welder comes with One-Knob intelligent control system. The welding machine automatically compensates and adjusts the welding current, allowing for a perfect weld. One-Knob controls the speed and current of the flux core welder. Lightweight and compact design is comfortable to hold and easy to carry around.
- Adjustable welding speed HBM200 display rated output current: 200A . Output current range: 30-200A. Duty cycle: 30%-140 A at 40 C. The welder has a current adjustment button; adjust the current variable feed control to perfectly manage flux cored welding of thin steel, stainless steel or even thicker steel. Note: The actual welding current effect is 140A.
- Safety protection HITBOX flux core welding machine has built-in overcurrent, overvoltage and overheating protection. The welding equipment will automatically shut down in case of overheating and overload. The fan cooling system in operation reduces dust entering the machine and extends its service life
- Package Content HITBOX inverter welder includes welding accessories: 1X MIG welding machine, 1X split welding gun, 1 X electrode holder, 1X grounding clamp, 1X brush, 2X nozzles, 1X 0.5KG Flux wire.
- Professional Services HITBOX offer 2-year warranty.If you are not satisfied with your purchase, please feel free to consult our customer service team through the order number. Trust our high quality and unique customer service.
- See more on Amazon...
Brand: HITBOX | Manufacturer: SHENZHEN UNITWELD WELDING AND MOTOR
Dimensions: 11.02 x 7.48 x 5.91 Inches | Weight: 11.30 pounds
See On Amazon #17
HEY UP MIG Welder, 140Amp 2 IN 1 Stick/Flux Core Welder with 2LBS Flux Cored Wire, 110V/220V Dual Voltage Welding Machine with Electrode Holder, IGBT Inverter Welder
Asin: B0B2VQSHLS | Model: 200Y | PartNumber: 200Y
【Portable Welder】Mig Welder Machine Is Made Of High Quality Material, Compact Mini Body Design (12.9*6*6.5 Inches, 11Lbs), Easy To Move And Store. The User-Friendly Handle Design Of The Flux Core Welder Allows You To Use Your Welding Creativity Anytime And Anywhere. Whether You Work Indoors Or Outdoors, The Handle Design Allows You To Carry It Around And Weld Whenever You Want..
【Big Enough For Wiring Space】Changing Wire Feeders Or Wire Feed Wheels Is A Simple Process, As Is Using Our Multi-Process Mig Welding Machine That Can Handle 2 Lbs Of Flux Cored Wire. In Addition, The Spacious Interior Makes Handling Mig Welding Tasks Easier. If You Have Any Questions, Please Feel Free To Contact Us..
【Easy To Operate】The Flux Core Welding Machine Is A Super Easy To Operate 2-In-1 Welder That Can Effectively Handle Iron And Carbon Steel Welding Tasks With Flux Cored Wire Sizes Of 0.030" And 0.035", You Can Set The Current Range According To The Thickness And Characteristics Of The Material, With An Output Current Of Up To 140 Amps And An Arc Mode That Supports Welding Of E7018 And E6013 Electrodes..
【Safe And Stable Welder】The Welding Machine Is Designed With 110V/220V Dual Voltage, Stable Wire Feeding, Good Arc Leading, Easy To Control And Suitable For Different Welding Requirements. Mig/Stick Welder Is Also Equipped With Overheat Protection To Improve Welding Efficiency And Ensure Your Safety. The High Performance Fan Motor Provides Cooling Function To Promote The Heat Dissipation Of The Machine And Prolong The Service Life Of The Machine..
Features
- IGBT Inverter Welder This welder can perform STICK(ARC)/MIG welding. The unique IGBT control mode improves the reliability of the welder, which can ensure good arc stability and provide smoother welding and deeper depth of melt with stable welding current for perfect welding. Perfect for beginners or professionals for small welding operations.
- Safe and stable welder The welding machine is designed with 110v/220v dual voltage, stable wire feeding, good arc leading, easy to control and suitable for different welding requirements. MIG/STICK welder is also equipped with overheat protection to improve welding efficiency and ensure your safety. The high performance fan motor provides cooling function to promote the heat dissipation of the machine and prolong the service life of the machine.
- Portable Welder MIG welder machine is made of high quality material, compact mini body design (12.9*6*6.5 inches, 11LBS), easy to move and store. The user-friendly handle design of the flux core welder allows you to use your welding creativity anytime and anywhere. Whether you work indoors or outdoors, the handle design allows you to carry it around and weld whenever you want.
- Easy to operate The flux core welding machine is a super easy to operate 2-in-1 welder that can effectively handle iron and carbon steel welding tasks with flux cored wire sizes of 0.030 and 0.035, you can set the current range according to the thickness and characteristics of the material, with an output current of up to 140 amps and an ARC mode that supports welding of E7018 and E6013 electrodes.
- Big enough for wiring space Changing wire feeders or wire feed wheels is a simple process, as is using our multi-process MIG welding machine that can handle 2 lbs of flux cored wire. In addition, the spacious interior makes handling MIG welding tasks easier. If you have any questions, please feel free to contact us.
- See more on Amazon...
Brand: HEY UP | Manufacturer: HEY UP
See On Amazon #18
YESWELDER 8ft 100A for Chicago Electric Welder Complete Replacement Mig Welding Gun Parts Torch Stinger
Asin: B07MQCRJ36 | Ean: 0768563619670 | UPC: 768563619670
Come With .030" Tip In The Gun ,And One More .035" Tip In The Package.
Usually Fits Welders Of Around 100A Gas Shielded Welders. (Welding Wire Diameter: 0.6-0.8Mm.).
Features
- This gun is 8 ft long (Longer than the OEM Gun),and has 2 trigger wires, gas hose, wire liner, and power cable all running up the inside of the hollow plastic hose. Generally speaking, these guns connect to a plastic wire feeder
- Usually fits welders of around 100A gas shielded welders. (Welding wire diameter: 0.6-0.8mm.)
- Come with .030 tip in the gun ,and one more .035 tip in the package
- See more on Amazon...
Brand: YESWELDER | Manufacturer: YESWELDER
Weight: 2.00 Pounds
See On Amazon #19
IHAYNER 10FT MIG Weld Gun Torch Stinger Replacement for Chicago MIG Welding Gun Electric Welder Complete Replacement Parts Torch Stinger 100A
Asin: B087CJXVJY | Model: 94164, 97503, 36691, 06271, 68885, 68886 | PartNumber: 94164, 97503, 36691, 06271, 68885, 68886
👍🏼 [Compatibility]For Chicago Electric Dual Mig 132T (Some Rewiring May Be Necessary For The Trigger Wires), Chicago Electric Power Mig 171-1 Item Number 36693, Chicago Electric Mig 170 Item Number 68885, Chicago Electric Mig 180 (With Modification), Chicago Electric Mig 151T 220V Welder (With Minor Adjustments), Chicago Electric Mig Item Number 62181.
👍🏼 [Highlight]One-Piece Design Is Especially Resistant To High Heat And Spatter, Which Will Lead To A Long Life. Lightweight And Balanced Curved Handle Provides A Comfortable Grip And Reduces Fatigue. Gun Tube Has An Electrically Insulated Metal Jacket, Which Optimizes Fine Wire Welding Performance. Cable Has A Strong Abrasion-Resistant, Extruded Rubber Jacket Which Ensures Long Life Of The Cable.
👍🏼 [Wide Applications] Small, Lightweight Gun That Is Great For Most Small Projects For Home, Farm, Shop, And Light Autobody Work.
👍🏼 [Compatibility]For Model 94164, 97503, Dual Mig 131 Model 36691, Chicago Electric 151 220V 06271 Welder, Chicago Electric 151T Welder, Chicago Electric 170 (Black Unit) 220V 68885 Welder (You Will Need To Solder Or Crimp The Trigger Wires On This Unit), Chicago Electric Black 180 Amp 68886 With Modifications Needed To The Trigger Wires (Crimp Or Solder), Chicago Electric 131 Model 06098.
Features
- [Fitment] MIG Weld Gun Replacement for Chicago 100A; Cable length: 10 Feet; Weld Wire Diameter: 0.6~0.8mm (0.024"~0.031"); Rated Current: 100A
- [Compatibility]for Model 94164, 97503, dual MIG 131 Model 36691, Chicago Electric 151 220V 06271 welder, Chicago Electric 151t welder, Chicago Electric 170 (black unit) 220v 68885 welder (you will need to solder or crimp the trigger wires on this unit), Chicago Electric Black 180 Amp 68886 with modifications needed to the trigger wires (crimp or solder), Chicago Electric 131 Model 06098
- [Compatibility]for Chicago Electric dual MIG 132T (some rewiring may be necessary for the trigger wires), Chicago Electric Power MIG 171-1 Item number 36693, Chicago Electric MIG 170 Item number 68885, Chicago Electric MIG 180 (with modification), Chicago Electric MIG 151t 220v welder (with minor adjustments), Chicago Electric MIG Item Number 62181
- [Wide Applications] Small, lightweight gun that is great for most small projects for home, farm, shop, and light autobody work
- [Highlight]One-piece design is especially resistant to high heat and spatter, which will lead to a long life. Lightweight and balanced curved handle provides a comfortable grip and reduces fatigue. Gun tube has an electrically insulated metal jacket, which optimizes fine wire welding performance. Cable has a strong abrasion-resistant, extruded rubber jacket which ensures long life of the cable
- See more on Amazon...
Brand: IHAYNER | Manufacturer: IHAYNER
See On Amazon #20
Weldpro 200 Amp Inverter Multi Process Welder with 3 Year Warranty Dual Voltage 220V/110V Mig/Tig/Arc Stick 3 in 1 welder/welding machine
Asin: B072S5J17X | Model: MIG200GDsv | PartNumber: MIG200GDsv | Ean: 0856052007111 | UPC: 856052007111
Mig,Stick Or Tig Weld All From A Single Compact, Space-Saving Unit. Welding Amperage Ranges230v: Mig: 40-200A; Mma: 40-200A; Tig: 15-200A115v: Mig:40-120A; Mma:40-120A; Tig: 15-120A; 30% At 200 Amp Rated Duty Cycle..
Dual Digital Display Easy To Read And Set Amperage And Wire Speed For Repeatable Welds Every Time. Vrd High Temp And Overload Protection With Indication. User Adjustable Inductance Settings..
Mig Welding Wire Diameter: .023 .030 .035, Welding Thickness: 19Ga- 0.197 In; Tig Tungsten Needle Diameter: 0.063 0.094, Welding Thickness: 25Ga- 1/4 In; Mma Electrode Dia: 0.063-0.157 Acid Electrode, Alkaline Electrode, Welding Thickness: 14Ga-0.315In.
The Model 200 Is Also Capable Of True Lift Tig Welding (Without Foot Pedal) As Well As Stick Welding And Aluminum Welding With The Optional Spool Gun. The Mig 200 Is An Intuitive Synergically Designed Mig / Flux Core Welding Machine..
Features
- Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding! AND 3 YEAR WARRANTY!
- The model 200 is also capable of true lift TIG welding (without foot pedal) as well as stick welding and aluminum welding with the optional spool gun. The MIG 200 is an intuitive synergically designed MIG / Flux Core welding machine.
- MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A; MMA: 40-200A; TIG: 15-200A115V: MIG:40-120A; MMA:40-120A; TIG: 15-120A; 30% at 200 Amp rated duty cycle.
- MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in; TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4 in; MMA electrode Dia: 0.063-0.157 acid electrode, alkaline electrode, welding thickness: 14ga-0.315in
- Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication. User adjustable inductance settings.
- See more on Amazon...
Brand: W Weldpro | Manufacturer: Zhejiang Linlong Welding Equipment Co., LTD
Dimensions: 14.96 x 17.72 x 8.66 inches | Weight: 30.43 Pounds
See On Amazon
Looking For Something Else?
Search