Sportway S30 Dash Cam Suction Mount (2nd Gen) with 10pcs Joints for REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,GoPro Hero and Most Other Dash Cameras DVR GPS
Asin: B06ZZW2Q77 | Model: 4326590314 | PartNumber: 4326590314 | Ean: 0603404285501 | UPC: 603404285501
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★Easy To Install,Remove The Suction Cup Protective Film And Attach To A Clean And Smooth Surface To Get Maximum Holding Strength On The Windshield..
★Easier To Use Than 3M Double-Sided Adhesive Mount Holder Bracket, No Harm To Car Glass.
★360 Degree Rotation Design,Rotate Ball Adapter Head Provides Flexibility For Positioning The Dash Cam..
★The Mount Uses Pom And Abs Plastics ,Tolerable Temperature Range Is :-40℃～120℃;The Suction Cup Uses Pvc Material, Tolerable Temperature Range Is :-20℃～70℃,And Bearing Weight Up To 5Kgs(11 Lb).
Features
- S30 with 10pcs different joints, suitable for most popular brand dash cam, such as REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,Black Box,GoPro Hero......For the corresponding brand and model, please check the picture
- The mount uses POM and ABS plastics ,tolerable temperature range is :-40 120 ;the suction cup uses PVC material, tolerable temperature range is :-20 70 ,and bearing weight up to 5kgs(11 lb)
- Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield.
- 360 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
- Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass
- See more on Amazon...
Brand: Sportway | Manufacturer: XLEADER
Dimensions: 2.95 x 2.17 x 2.17 inches | Weight: 0.12 Pounds
Warranty: 3-Year Warranty
See On Amazon Similar To Sportway S30 Dash Cam Suction
#1
Sportway S503 Suction Cup Dash Cam Mount Holder (5th Gen) with 3pcs 360 Rotating Joints for Rove Nexar Z-Edge Kingslim iiwey NIUTA and Most Other Car Dash Cameras
Asin: B0BMP7QNF3 | Model: S503 | PartNumber: S503
★The Dash Cam Mount Uses Pom+Abs Plastic , Sturdy And Heat Resistant. The Suction Cup Used Pvc Material, Diameter 53Cm. Remove The Mount Easily By Pulling The Suction Clip Without Leaving Any Nasty Marks..
★Easy To Install And Remove, Remove The Suction Cup Protective Film, Fix It On On The Windshield, Press The Suction Cup Firmly To Exhaust The Air, Then Twist Right To Lock It On The Surface Area, Twist Left To Unlock It, Make It Easy To Place Dash Cam Wherever You Need..
★Secure & Stable, Sportway Dash Cam Mount Featured With Upgraded Super Strong Suction Cup, The Rotary Type Instead Of The Press Type Can Better Discharge The Air In The Suction Cup And Reach The Vacuum State. Even On The Bumpiest Road, It Is Still Easy To Sticks Securely On The Windshield Or Dashboard. Just Make Sure To Remove All Air From Underneath. The Suction Mount Is Made Of High-Quality Material Which Make It Be Able To Work For A Long Time..
★ [360 Degrees Rotation] Adjust The 360 Degrees Joint To Get Any Angle You Need, Providing You With The Best Viewing To Keep Secure Driving. Just Enjoy The Best Driving Experience..
Features
- S503 dash cam mount is the newest version, it is 1/2 smaller than the old model, compact and does not affect the sightline, size with 3 different joints suitable for most popular brand dash cam, such as Rove dash cam, Nexar dash cam, Z-Edge dash cam, Kingslim dash cam, iiwey dash cam, NIUTA dash cam, and most other car dash cameras.
- [360 Degrees Rotation] Adjust the 360 degrees joint to get any angle you need, providing you with the best viewing to keep secure driving. Just enjoy the best driving experience.
- The dash cam mount uses POM+ABS plastic , Sturdy and heat resistant. The suction cup used PVC material, diameter 53cm. Remove the mount easily by pulling the suction clip without leaving any nasty marks.
- Secure & Stable, Sportway dash cam mount featured with upgraded super strong suction cup, The rotary type instead of the press type can better discharge the air in the suction cup and reach the vacuum state. Even on the bumpiest road, It is still easy to sticks securely on the windshield or dashboard. Just make sure to remove all air from underneath. The suction mount is made of high-quality material which make it be able to work for a long time.
- Easy to Install and remove, Remove the suction cup protective film, fix it on on the Windshield, press the suction cup firmly to exhaust the air, then twist right to lock it on the surface area, twist left to unlock it, make it easy to place dash cam wherever you need.
- See more on Amazon...
Brand: Sportway | Manufacturer: Sportway
Dimensions: 1.06 x 2.95 x 2.17 Inches | Weight: 0.08 pounds
See On Amazon #2
Dash Cam Mount, Suction Cup Mount,Windshield & Dashboard Suction Cup Mount Camera Mount,For ROVE R2-4K,CHORTAU Dash Cam,Screw Connectors Are Suitable For Most Dash Cam, DVR, GPS and Sports Camera
Asin: B0BG88J5JB | Ean: 0797447429173 | UPC: 797447429173
【Multi Function Mount】The Dash Cam Mount Is Equipped With An Adjustment Knob, Which Can Rotate 360 ° To Achieve The Best Position For The Equipment. The Suction Cup Mount Can Be Adsorbed On The Windshield, Automobile Dashboard, Glassware, Windows, Boats And Any Smooth And Clean Surface, Without Leaving Residues And Scratches After Removal..
【Package List】 1X Suction Cup Holder, 1X 1/4" Thread Adapter, 1X 1/8" Thread Adapter, 1X Disassembly Tool (Small Screwdriver, Small Screw).
【High Quality Materials]】The Suction Cup Mount Of The Dash Cam Is Made Of Abs+Pvc Environment-Friendly Raw Materials，The 1/4 "1/8" Thread Adapter Is Made Of Alloy Materials， The Surface Is Anodized To Improve The Corrosion Resistance, Wear Resistance And Heat Resistance..
【Strong Suction And Stability】 In Extremely Hot And Cold Weather Conditions, The Dash Cam Mount Will Still Be Firmly Attached To The Windshield Or Dashboard. It Has A Strong Vacuum Force, Which Will Last For A Long Time And Will Not Shake During Driving, Ensuring That Your Dash Cam Is Free From Wear..
Features
- Wide Compatible Compatible with ROVE R2-4K, CHORTAU, GoPro Hero, Z-Edge, OldShark, Jeemak, Apexcam, NIUTA, DJI OSMO, APEMAN, 1/4" 1/8" thread adapter for most dash cams, Action cameras, DVRs, GPS and webcams, please carefully confirm the size of the connector before purchasing.
- Strong suction and stability In extremely hot and cold weather conditions, the Dash Cam Mount will still be firmly attached to the windshield or dashboard. It has a strong vacuum force, which will last for a long time and will not shake during driving, ensuring that your dash cam is free from wear.
- Multi function mount The dash cam mount is equipped with an adjustment knob, which can rotate 360 to achieve the best position for the equipment. The suction cup mount can be adsorbed on the windshield, automobile dashboard, glassware, windows, boats and any smooth and clean surface, without leaving residues and scratches after removal.
- High quality materials] The suction cup mount of the dash cam is made of ABS+PVC environment-friendly raw materials The 1/4 1/8 thread adapter is made of alloy materials The surface is anodized to improve the corrosion resistance, wear resistance and heat resistance.
- Package List 1x suction cup holder, 1x 1/4 thread adapter, 1x 1/8 thread adapter, 1x disassembly tool (small screwdriver, small screw)
- See more on Amazon...
Brand: SDSACZMU | Manufacturer: loudishi shanda dianzikeji youxian gongsi
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.13 Pounds
Warranty: lifelong
See On Amazon #3
Dash Cam Suction Cup Mount and Glue Adhesive Mount Compatible with Dash Camera/DVR Video, Come with 10+ Different Joints Suitable for Crosstour, YI 2.7", Rexing V1P, UGSHD, APEMAN and Other Dash Cam
Asin: B07GN5DG1V | Model: xp2288 | PartNumber: xp2288 | Ean: 0781520967126 | UPC: 781520967126
Adjustable Neck With 360 Degrees Rotating Holder, Easy To Install And Easy To Use..
What You Get - 2 X Dash Cam Mount Holders,10+ Different Pivot Swivel Points,2 X Glue Double Sided Adhesive Tapes..
Please Attaching To A Clean And Smooth Surface To Get Maximum Holding Strength.
Sturdy And Heat Resistant, The Windshield Under The Scorching Sun, The Suction Cup Bracket Can Still Maintain A Strong Suction..
Features
- Fits most popular car dash cam Compatible with YI 2.7" YI Nightscape, Rexing V1 Old Shark Dash Cam Anker Dash Cam. Not compatible Garmin Dash Cam.
- Sturdy and heat resistant, the windshield under the scorching sun, the suction cup bracket can still maintain a strong suction.
- Adjustable neck with 360 degrees rotating holder, Easy to install and easy to use.
- Please attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
- What You Get - 2 x dash cam mount holders,10+ different pivot swivel points,2 x Glue Double Sided Adhesive Tapes.
- See more on Amazon...
Brand: SoeKoa | Manufacturer: SoeKoa
Weight: 0.25 Pounds
See On Amazon #4
Sportway S10 Suction Cup Dash Cam Mount Holder with 6+pcs Joints for Rove APEMAN CHORTAU Roav Nexar iiwey YI Z-Edge Old Shark KDLINKS Falcon Zero... Most Car Dash Cameras
Asin: B09VGBWN48 | Model: S10 | PartNumber: S10
Easy To Install,Remove The Suction Cup Protective Film And Attach To A Clean And Smooth Surface To Get Maximum Holding Strength On The Windshield. Easier To Use Than 3M Double-Sided Adhesive Mount Holder Bracket, No Harm To Car Glass..
We Offer 3-Year Warranty For Quality-Related Issues,And If This Mount Does Not Fit For Your Dash Cam, Welcome To Visit Sportway Other Mounts, Such As S10 S10pro S20 S30 S40 S50 S60 S80... There's Always One For You!.
270 Degree Rotation Design,Rotate Ball Adapter Head Provides Flexibility For Positioning The Dash Cam..
The Mount Uses Pom And Abs Plastics ,Tolerable Temperature Range Is :-40℃～120℃;The Suction Cup Uses Pvc Material, Tolerable Temperature Range Is :-20℃～70℃,And Bearing Weight Up To 5Kgs(11 Lb).
Features
- S10 with 6+pcs different joints, suitable for most popular brand dash cam, such as Rove APEMAN CHORTAU Roav Nexar iiwey YI Z-Edge Old Shark KDLINKS Falcon Zero... For the corresponding brand and model, please check the picture
- The mount uses POM and ABS plastics ,tolerable temperature range is :-40 120 ;the suction cup uses PVC material, tolerable temperature range is :-20 70 ,and bearing weight up to 5kgs(11 lb)
- Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield. Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass.
- 270 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
- We offer 3-Year warranty for quality-related issues,and If this mount does not fit for your dash cam, welcome to visit Sportway other mounts, such as S10 S10Pro S20 S30 S40 S50 S60 S80... There's always one for you!
- See more on Amazon...
Brand: Sportway | Manufacturer: Sportway
Dimensions: 2.56 x 2.17 x 2.17 inches | Weight: 0.17 pounds
Warranty: 3 years warranty
See On Amazon #5
Glucrean Dash Cam Mount Compatible with CHORTAU/OldShark/NIUTA/Apexcam dashcam, Suction Cup Mount Easy to Install and Use, Strong Suction Power Hight Durability and Removeable 2 Pcs
Asin: B08JK871SS | Model: YK-ZY-Car Electronics-65 | PartNumber: YK-ZY-Car Electronics-65 | Ean: 0749965222446 | UPC: 749965222446
✈✈ Easy To Install And Use. Simple Structure And Friendly Design Make It Easy To Install And Use. Just 3 Steps To Install, And One Joining Ball Design Make It Rotatable, So You Can Adjust Dash Cam To Get A Good Shooting View Easily.
✈✈ Considerate Service. Any Problem Just Get A New One Or Money Back. We Provide 2 Dash Cam Holders Which Doesn’T Mean They Are Poor Quality, We Just Want To Give You More Benefit.
✈✈ Easy To Remove And Long Time Used. Just 2 Simple Steps To Take The Mount Off From Windshield With The Ingenious Design, Make It Easy To Place Dash Cam Wherever You Need. The Suction Mount Is Made Of High-Quality Material Which Make It Be Able To Work For A Long Time.
✈✈ Strong Suction Power. Experiment Shows This Windshield Mount Can Hang Up 9 Pounds Of Cola, Dashcam Usually Weights About 0.5 Pound, This Suction Cup Mount Can Hold It Tightly Even In A Bouncy Work Truck.
Features
- For These Dashcams, 2 diameter screws, 0.16 in/4 mm and 0.24 in/6mm, fits CHORTAU Dual Dash Cam 3 inch, OldShark 3 inch dashcam, NIUTA 3 Inch dashcam, Apexcam Dual Dash Camera 4" IPS, and other screw-mounted dashcam with 4 mm Screw hole, such as AUTOSOCT Dual Dash Cam 4.0 Inch, TOGUARD 4K UHD Dash Cam
- Strong Suction Power. Experiment shows this windshield mount can hang up 9 POUNDS of cola, dashcam usually weights about 0.5 pound, this suction cup mount can hold it tightly even in a bouncy work truck
- Easy to Install and Use. Simple structure and friendly design make it easy to install and use. Just 3 steps to install, and one joining ball design make it rotatable, so you can adjust Dash Cam to get a good shooting view easily
- Easy to Remove and Long Time Used. just 2 simple steps to take the mount off from windshield with the ingenious design, make it easy to place dash cam wherever you need. The suction mount is made of high-quality material which make it be able to work for a long time
- Considerate Service. Any problem just get a new one or MONEY BACK. We provide 2 dash cam holders which doesn t mean they are poor quality, we just want to give you more benefit
- See more on Amazon...
Brand: Glucrean | Manufacturer: MILsEnse
See On Amazon #6
Sportway Dash Cam Mount, S10 Pro Suction Cup Dash Camera Mount Holder with 10+pcs Joints for Rove APEMAN CHORTAU Roav Nexar iiwey REXING Z-Edge Old Shark YI ... 98% Car Dash Cameras
Asin: B09VG9ZN38 | Model: S10 Pro | PartNumber: S10 Pro
Easy To Install,Remove The Suction Cup Protective Film And Attach To A Clean And Smooth Surface To Get Maximum Holding Strength On The Windshield. Easier To Use Than 3M Double-Sided Adhesive Mount Holder Bracket, No Harm To Car Glass..
We Offer 3-Year Warranty For Quality-Related Issues,And If This Mount Does Not Fit For Your Dash Cam, Welcome To Visit Sportway Other Mounts, Such As S10 S10pro S20 S30 S40 S50 S60 S80... There's Always One For You!.
270 Degree Rotation Design,Rotate Ball Adapter Head Provides Flexibility For Positioning The Dash Cam..
The Mount Uses Pom And Abs Plastics ,Tolerable Temperature Range Is :-40℃～120℃;The Suction Cup Uses Pvc Material, Tolerable Temperature Range Is :-20℃～70℃,And Bearing Weight Up To 5Kgs(11 Lb).
Features
- S10 Pro with 10+pcs different joints, suitable for most popular brand dash cam, such as Rove APEMAN CHORTAU Roav Nexar iiwey REXING Z-Edge Old Shark YI Crosstour VANTRUE... For the corresponding brand and model, please check the picture
- The mount uses POM and ABS plastics ,tolerable temperature range is :-40 120 ;the suction cup uses PVC material, tolerable temperature range is :-20 70 ,and bearing weight up to 5kgs(11 lb)
- Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield. Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass.
- 270 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
- We offer 3-Year warranty for quality-related issues,and If this mount does not fit for your dash cam, welcome to visit Sportway other mounts, such as S10 S10Pro S20 S30 S40 S50 S60 S80... There's always one for you!
- See more on Amazon...
Brand: Sportway | Manufacturer: Sportway
Dimensions: 2.56 x 2.17 x 2.17 Inches | Weight: 0.17 pounds
Warranty: 3 years warranty
See On Amazon #7
QveeQ Dash Cam Suction Cup Mount Compatible with Crosstour, APEMAN, YI 2.7", Z-Edge Z3 3" and Most Other Dash Cam with 16 Different Points, 3 x Glue Double Sided Adhesive Tapes, 3 Wipes(Dry and Wet)
Asin: B07NKF52ZN | Model: 3M-24 | PartNumber: 3M-24 | Ean: 0763231156235 | UPC: 763231156235
Wipe The Windshield And The Bottom Of The Suction Cup With Alcohol Cotton. Get The Most Adsorption..
Come With 9 Different Joints, Suitable For 99% Dash Cam..
A 360-Degree Rotating Ball Adapter Head For Flexible Positioning Of The Camera..
Easy To Install And Remove, No Residue..
Features
- The dashcam mount Compatible with Byakov, YI 2.7", YI Nightscape, Rexing V1, APEMAN, Roav, Old Shark Dash Cam Anker dash cam etc. Not compatible Garmin Dash Cam.
- Easy to install and remove, no residue.
- Wipe the windshield and the bottom of the suction cup with alcohol cotton. Get the most adsorption.
- A 360-degree rotating ball adapter head for flexible positioning of the camera.
- Come with 9 different joints, suitable for 99% dash cam.
- See more on Amazon...
Brand: QveeQ | Manufacturer: QveeQ
Weight: 0.28 Pounds
See On Amazon #8
Sportway S20 Suction Cup Dash Cam Mount Holder with 5+pcs Joints for Rove APEMAN CHORTAU Roav Nexar iiwey YI Z-Edge Old Shark KDLINKS Falcon Zero... Most Car Dash Cameras
Asin: B09VGBF7YW | Model: S20 | PartNumber: S20
★Easy To Install,Remove The Suction Cup Protective Film And Attach To A Clean And Smooth Surface To Get Maximum Holding Strength On The Windshield. Easier To Use Than 3M Double-Sided Adhesive Mount Holder Bracket, No Harm To Car Glass..
★We Offer 3-Year Warranty For Quality-Related Issues,And If This Mount Does Not Fit For Your Dash Cam, Welcome To Visit Sportway Other Mounts, Such As S10 S10pro S20 S30 S40 S50 S60 S80... There's Always One For You!.
★270 Degree Rotation Design,Rotate Ball Adapter Head Provides Flexibility For Positioning The Dash Cam..
★The Mount Uses Pom And Abs Plastics ,Tolerable Temperature Range Is :-40℃～120℃;The Suction Cup Uses Pvc Material, Tolerable Temperature Range Is :-20℃～70℃,And Bearing Weight Up To 5Kgs(11 Lb).
Features
- S20 with 5+pcs different joints, suitable for most popular brand dash cam, such as Rove APEMAN CHORTAU Roav Nexar iiwey YI Z-Edge Old Shark KDLINKS Falcon Zero... For the corresponding brand and model, please check the picture
- The mount uses POM and ABS plastics ,tolerable temperature range is :-40 120 ;the suction cup uses PVC material, tolerable temperature range is :-20 70 ,and bearing weight up to 5kgs(11 lb)
- Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield. Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass.
- 270 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
- We offer 3-Year warranty for quality-related issues,and If this mount does not fit for your dash cam, welcome to visit Sportway other mounts, such as S10 S10Pro S20 S30 S40 S50 S60 S80... There's always one for you!
- See more on Amazon...
Brand: Sportway | Manufacturer: Sportway
Dimensions: 2.56 x 2.17 x 2.17 Inches | Weight: 0.17 pounds
Warranty: 2-year
See On Amazon #9
Sportway S501 Dash Cam Suction Mount Holder (5th Gen), Replaceabled Joint for CHORTAU OldShark NIUTA Boogiio ORSKEY Abask and Most Other Car Dash Cameras
Asin: B0BMPGSNQL
★The Dash Cam Mount Uses Pom+Abs Plastic , Sturdy And Heat Resistant. The Suction Cup Used Pvc Material, Diameter 53Cm. Remove The Mount Easily By Pulling The Suction Clip Without Leaving Any Nasty Marks..
★Easy To Install And Remove, Remove The Suction Cup Protective Film, Fix It On On The Windshield, Press The Suction Cup Firmly To Exhaust The Air, Then Twist Right To Lock It On The Surface Area, Twist Left To Unlock It, Make It Easy To Place Dash Cam Wherever You Need..
★Secure & Stable, Sportway Dash Cam Mount Featured With Upgraded Super Strong Suction Cup, The Rotary Type Instead Of The Press Type Can Better Discharge The Air In The Suction Cup And Reach The Vacuum State. Even On The Bumpiest Road, It Is Still Easy To Sticks Securely On The Windshield Or Dashboard. Just Make Sure To Remove All Air From Underneath. The Suction Mount Is Made Of High-Quality Material Which Make It Be Able To Work For A Long Time..
★ [360 Degrees Rotation] Adjust The 360 Degrees Joint To Get Any Angle You Need, Providing You With The Best Viewing To Keep Secure Driving. Just Enjoy The Best Driving Experience..
Features
- S501 dash cam mount is the newest version, it is 1/2 smaller than the old model, compact and does not affect the sightline, size with one joint suitable for most popular brand dash cam, such as CHORTAU Dual Dash Cam 3 inch, OldShark 3 inch dashcam, NIUTA 3 Inch dashcam, Apecam Dual Dash Camera 4" IPS, and other screw-mounted dashcam with 4 mm Screw hole, such as AUTOSOCT Dual Dash Cam 4.0 Inch, TOGUARD 4K UHD Dash Cam.
- [360 Degrees Rotation] Adjust the 360 degrees joint to get any angle you need, providing you with the best viewing to keep secure driving. Just enjoy the best driving experience.
- The dash cam mount uses POM+ABS plastic , Sturdy and heat resistant. The suction cup used PVC material, diameter 53cm. Remove the mount easily by pulling the suction clip without leaving any nasty marks.
- Secure & Stable, Sportway dash cam mount featured with upgraded super strong suction cup, The rotary type instead of the press type can better discharge the air in the suction cup and reach the vacuum state. Even on the bumpiest road, It is still easy to sticks securely on the windshield or dashboard. Just make sure to remove all air from underneath. The suction mount is made of high-quality material which make it be able to work for a long time.
- Easy to Install and remove, Remove the suction cup protective film, fix it on on the Windshield, press the suction cup firmly to exhaust the air, then twist right to lock it on the surface area, twist left to unlock it, make it easy to place dash cam wherever you need.
- See more on Amazon...
Brand: Sportway | Manufacturer: Sportway
Dimensions: 1.38 x 4.33 x 3.19 Inches
See On Amazon #10
Glucrean Dash Cam Mount Compatible with ORSKEY/BOOGIIO/Apexcam/Ajvvf Dashcam, Suction Cup Mount Easy to Install and Use, Strong Suction Power Hight Durability and Removeable 2 Pcs
Asin: B0BHZ71RD4 | Ean: 0707443016840 | UPC: 707443016840
✈✈ Easy To Install And Use. Simple Structure And Friendly Design Make It Easy To Install And Use. Just 3 Steps To Install, And One Joining Ball Design Make It Rotatable, So You Can Adjust Dash Cam To Get A Good Shooting View Easily.
✈✈ Easy To Remove And Long Time Used. Just 2 Simple Steps To Take The Mount Off From Windshield With The Ingenious Design, Make It Easy To Place Dash Cam Wherever You Need. The Suction Mount Is Made Of High-Quality Material Which Make It Be Able To Work For A Long Time.
✈✈ Strong Suction Power. Experiment Shows This Windshield Mount Can Hang Up 9 Pounds Of Cola, Dashcam Usually Weights About 0.5 Pound, This Suction Cup Mount Can Hold It Tightly Even In A Bouncy Work Truck.
Features
- For These Dashcams, 2 diameter screws, 0.16 in/4 mm and 0.24 in/6mm, fit for ORSKEY Dashcam, BOOGIIO dash cam, Apexcam dash cam, Ajvvf Dashcam, and other dash cam use 4.1mm screw
- Strong Suction Power. Experiment shows this windshield mount can hang up 9 POUNDS of cola, dashcam usually weights about 0.5 pound, this suction cup mount can hold it tightly even in a bouncy work truck
- Easy to Install and Use. Simple structure and friendly design make it easy to install and use. Just 3 steps to install, and one joining ball design make it rotatable, so you can adjust Dash Cam to get a good shooting view easily
- Easy to Remove and Long Time Used. just 2 simple steps to take the mount off from windshield with the ingenious design, make it easy to place dash cam wherever you need. The suction mount is made of high-quality material which make it be able to work for a long time
- See more on Amazon...
Brand: Glucrean | Manufacturer: Glucrean
Warranty: 90 days limited warranty
See On Amazon
Looking For Something Else?
Search