uxcell Aluminum 20 Teeth 5mm Bore 2mm Pitch Timing Belt Pulley
Asin: B0714QYPGV | Model: US-SA-AJD-363375 | PartNumber: US-SA-AJD-363375
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suits To The Timing Belt Which Is 6Mm In Width..
Package Content: 1 X Timing Belt Pulley.
20 Contact With The Tooth Side Which Minimizes The Risk Of The Belt Slipping.
Teeth: 20T; Bore: 5Mm; Pitch: 2Mm.
Features
- Material: Aluminum
- Teeth: 20T; Bore: 5mm; Pitch: 2mm
- Suits to the timing belt which is 6mm in width.
- 20 contact with the tooth side which minimizes the risk of the belt slipping
- Package Content: 1 x Timing Belt Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 0.79 x 0.79 inches
See On Amazon Similar To uxcell Aluminum 20 Teeth 5mm
#1
uxcell Spiral Point Plug Threading Tap M5 x 0.8 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B07Z9RLFRW | Model: a19091100ux0216 | PartNumber: a19091100ux0216
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: Thread size: M5 x 0.8; thread tolerance: H2; thread length: 20mm / 0.78"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell M5 x 0.8mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B098K2WRH6 | Model: a21020200ux0290 | PartNumber: a21020200ux0290
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M5 x 0.8 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 6063 Aluminum Round Tube, 20mm OD 17mm Inner Dia 400mm Length Pipe Tubing for Industry DIY Projects
Asin: B0CKXY1CXG | Model: a23091200ux0153 | PartNumber: a23091200ux0153
[Seamless Construction] - Both The Surface And Interior Of The Aluminum Tubing Are Smooth Without Seams And Are Available In Mechanical Structural Components For Precision Applications. Can Be Processed, Punched, And Welded By Using Professional Equipment According To The Different Lengths And Shapes You Need..
[Notice] - The Surface Of The Aluminum Tubes Probably Would Be Oxidized, Which Is A Normal Characteristic Of Aluminum. However, It Does Not Affect Its Use. If You Need A Beautiful And Perfect Appearance, It Is Recommended To Grind The Surface..
[Wide Application] - The Aluminum Tube Is Widely Used In A Variety Of Industrial Structural Parts That Require A Certain Strength And Corrosion Resistance. Commonly Used In Industry, Architecture, Home Furnishing And Other Industries. Great For Machinery, Hardware Fitting, Architectural Decoration, Diy Handmade, Frames, Customized Models, Crafts, Gardening Ornaments, Mechanical Structural Components, Etc..
[Material] - The Straight Metal Tubes Are Made Of 6063 Aluminum With Medium Strength, Good Processing Performance, Corrosion Resistance, High Toughness, Weldability, Long-Lasting Durability And Processing Is Not Easy To Deform..
Features
- [What You Get] - You will receive 1 piece of 6063 aluminum round tube with 20mm/0.79-inch in outer diameter, 17mm/0.67-inch in inner diameter and 400mm/15.75-inch in total length. Please double-check the size before ordering.
- [Material] - The straight metal tubes are made of 6063 aluminum with medium strength, good processing performance, corrosion resistance, high toughness, weldability, long-lasting durability and processing is not easy to deform.
- [Seamless Construction] - Both the surface and interior of the aluminum tubing are smooth without seams and are available in mechanical structural components for precision applications. Can be processed, punched, and welded by using professional equipment according to the different lengths and shapes you need.
- [Wide Application] - The aluminum tube is widely used in a variety of industrial structural parts that require a certain strength and corrosion resistance. Commonly used in industry, architecture, home furnishing and other industries. Great for machinery, hardware fitting, architectural decoration, DIY handmade, frames, customized models, crafts, gardening ornaments, mechanical structural components, etc.
- [Notice] - The surface of the aluminum tubes probably would be oxidized, which is a normal characteristic of aluminum. However, it does not affect its use. If you need a beautiful and perfect appearance, it is recommended to grind the surface.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 15.75 x 0.79 inches
See On Amazon #4
uxcell Aluminum 20 Teeth 10mm Bore 5mm Pitch Timing Belt Pulley for 15mm Belt
Asin: B0747GB3F4 | Model: a17042100ux1212 | PartNumber: a17042100ux1212
This Timing Belt Pulley Suits To 15Mm Timing Belt..
Package Content: 1 X Timing Belt Pulley.
Used Widely In Milling Machine, 3D Printer, Drilling Machine Or Other Machinery Transmission..
Teeth: 20; Bore Diameter: 10Mm; Pitch: 5Mm.
Features
- Material: Aluminum Alloy
- Teeth: 20; Bore Diameter: 10mm; Pitch: 5mm
- This timing belt pulley suits to 15mm timing belt.
- Used widely in milling machine, 3D printer, drilling machine or other machinery transmission.
- Package Content: 1 x Timing Belt Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 1.18 x 1.18 inches | Weight: 0.02 pounds
See On Amazon #5
uxcell 10Pcs M3 x 20mm Round Aluminum Column Alloy Standoff Spacer Stud Fastener for Quadcopter Black
Asin: B01MTC40YU | Model: a16112600ux0182 | PartNumber: a16112600ux0182 | Ean: 0604267148514 | UPC: 604267148514
Net Weight: 7G; Screw Thread: M3 Outside Diameter Of Standoff: 5 Mm.
Main Color: Black; It Applies To 180 210 250 Class Rack.
Package Content: 10Pcs X Round Aluminum Column; Body Length: 20 Mm.
Material: Metal; Textured Aluminum Cylinder Inner Tooth M3 * 20Mm.
Features
- Country of Manufacture: CHINA; Style: Female Material: aluminum
- Material: Metal; Textured aluminum cylinder inner tooth M3 * 20MM
- Net Weight: 7g; Screw Thread: M3 Outside diameter of standoff: 5 mm
- Package Content: 10Pcs x Round Aluminum Column; Body Length: 20 mm
- Main Color: Black; It applies to 180 210 250 class rack
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Blind Rivets 304 Stainless Steel 5mm Diameter 20mm Grip Length Silver 50pcs
Asin: B0951Z8HVJ | Model: a21012200ux0230 | PartNumber: a21012200ux0230
Mounting - According To The Size Of The Hole, Choose The Blind Rivet Of The Appropriate Specification, Then Put The Blind Rivet Into The Hole And Use The Riveting Machine To Pull The Riveting..
Durable Material - 304 Stainless Steel Rivet Mandrel With Lightweight But Strong And Better Corrosion Resistance..
Notice - Need Special Tools (Like Riveter) To Mounting This Blind Rivets..
Applications - Widely Used In Buildings, Ships, Aircraft, Machines, Furniture And Other Products. Good For Both Indoor And Outdoor Use..
Features
- Features - Material: 304 stainless steel; Rivet Grip Size: 5 x 20mm / 0.2 x 0.79inch (D*L); Rivet Mandrel Dia: 2.95mm / 0.12inch; Flange Size: 9.8 x 2.1mm / 0.39 x 0.08inch (Max.D*T)
- Applications - Widely used in buildings, ships, aircraft, machines, furniture and other products. Good for both indoor and outdoor use.
- Mounting - According to the size of the hole, choose the blind rivet of the appropriate specification, then put the blind rivet into the hole and use the riveting machine to pull the riveting.
- Notice - Need special tools (like Riveter) to mounting this blind rivets.
- Durable Material - 304 stainless steel rivet mandrel with lightweight but strong and better corrosion resistance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 6063 Aluminum Square Tube, 20mmx20mmx2mm Wall Thickness 200mm Length Seamless Straight Pipe Tubing 4 Pcs
Asin: B07ZVS9KCR | Model: a19090600ux0616 | PartNumber: a19090600ux0616
[Features] - Smooth Surface Without A Seam And Is Available In An Extruded Structural Or A Drawn Seamless Aluminum Square Tube For Precision Applications..
[Notice] - Surface Without Sanded Or Polished. It Can Be Processed According To The Length You Need And Can Be Welded With The Right Equipment..
[Application] - Widely Used In A Variety Of Industrial Structural Parts That Require A Certain Strength And Corrosion Resistance. Commonly Used In Industrial Fittings, Machinery And Equipment, Architectural Decoration, Diy Crafts, Static Models, Frames, Gardening Ornaments, Etc..
[T5 Temper] - T5 Temper With Heat Treated And Artificially Aged For Increasing Strength And Meeting Standard Mechanical Property Requirements..
Features
- [Material] - 6063 aluminum with light mass, medium strength, processing performance, good corrosion resistance, high toughness, weldability, and processing is not easy to deform.
- [T5 Temper] - T5 temper with heat treated and artificially aged for increasing strength and meeting standard mechanical property requirements.
- [Features] - Smooth surface without a seam and is available in an extruded structural or a drawn seamless aluminum square tube for precision applications.
- [Application] - Widely used in a variety of industrial structural parts that require a certain strength and corrosion resistance. Commonly used in industrial fittings, machinery and equipment, architectural decoration, DIY crafts, static models, frames, gardening ornaments, etc.
- [Notice] - Surface without sanded or polished. It can be processed according to the length you need and can be welded with the right equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 5mm X 20mm Carbon Steel Hexagon Head Self Tapping Screws Black 100 Pcs
Asin: B015A3CQ0I | Model: a15061900ux0300 | PartNumber: a15061900ux0300 | Ean: 0712662154983 | UPC: 712662154983
Drive Type: Hex Socket; Main Color: Black; Overall Size: 25Mm/1"(Length).
Head Height: 5Mm/0.2"; Hex Width: 4Mm/0.16".
Pitch: 2.0Mm; Head Diameter: 8Mm/0.24".
Product Name: Self Tapping Screw; Thread Size: 5Mm X 20Mm/0.2" X 1"(D*L); Weight: 313G.
Features
- Head Style: Hex Head; Material: Carbon Steel; Package Content: 100 (+/-2%) x Self Tapping Screws
- Product Name: Self Tapping Screw; Thread Size: 5mm x 20mm/0.2 x 1(D*L); Weight: 313g
- Drive Type: Hex Socket; Main Color: Black; Overall Size: 25mm/1(length)
- Pitch: 2.0mm; Head Diameter: 8mm/0.24
- Head Height: 5mm/0.2; Hex Width: 4mm/0.16
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 4pcs SK20 Aluminum Linear Motion Rail Clamping Guide Support for 20mm Dia Shaft
Asin: B07426SVYM | Model: a17052600ux0590 | PartNumber: a17052600ux0590
Low Friction Resistance Can Get High Precision Rotating In The Smooth Movement..
Economical, Easy To Maintain Replace..
Widely Used In Multi-Axis Machine, Installed The Sliding Parts Such As Industrial Machinery..
Made Of Aluminum Material, Corrosion Resistance And Long Life..
Features
- SK20 Aluminum Linear Motion Rail Clamping Guide Support
- Made of Aluminum material, corrosion resistance and long life.
- Low friction resistance can get high precision rotating in the smooth movement.
- Widely used in multi-axis machine, installed the sliding parts such as industrial machinery.
- Economical, easy to maintain replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell M6 x 1mm Metric Left Hand Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B098XW1RB9 | Model: a21031100ux0274 | PartNumber: a21031100ux0274
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M6 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, left hand (reverse) tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #11
uxcell M3 x 0.5mm Metric Left Hand Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B09954BLLB | Model: a21031100ux0271 | PartNumber: a21031100ux0271
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M3 x 0.5 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, left hand (reverse) tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #12
uxcell M6 x 1mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B098K24ZSP | Model: a21020200ux0292 | PartNumber: a21020200ux0292
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M6 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 2Pcs Carbon Fiber Tubes 23 x 25 x 400mm Matte Surface Rod 3K Roll Wrapped Carbon Round Tubing for RC Airplane Quadcopter Multicopter
Asin: B0D14MXMVV
Pure Hollow Carbon Fiber Rod Is Used Of High-Tech Carbon Fiber Composite Material. High Strength, Corrosion Resistance, Surface Smoothness, Straightness Good, Stable Performance..
When Using This Carbon Fiber Tubes, It Is Important To Consider The Dimensions To Ensure It Fits Your Specific Application..
The Carbon Tubes Specific Strength And Elastic Modulus Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum.It Has Good Tensile Strength.Ensures Long-Lasting Performance Even In Challenging Environments..
Tube Diameter: 23 X 25Mm/0.91 X 0.98 Inch(Id*Od); Length: 400Mm/15.75 Inch; Type: Matte Surface;Package Content:2Pcs X Carbon Fiber Round Tube..
Features
- This product is a carbon fiber tube, the carbon fiber tubes can be easily cut to any length with abrasive chop saw or fine tooth blades. Designed for use in various applications such as racing drones, RC helicopters, airplanes,fishing, sailboats, DIY craft, and kite spars.It can be used to build drone frames, strengthen RC helicopter wings, build lightweight RC aircraft, and create durable kite masts.
- Tube Diameter: 23 x 25mm/0.91 x 0.98 inch(ID*OD); Length: 400mm/15.75 inch; Type: Matte Surface;Package Content:2Pcs x carbon fiber round tube.
- Pure Hollow Carbon Fiber Rod is used of high-tech carbon fiber composite material. High strength, corrosion resistance, surface smoothness, straightness good, stable performance.
- The carbon tubes specific strength and elastic modulus are actually higher than carbon steel, yet it is lighter than aluminum.It has good tensile strength.Ensures long-lasting performance even in challenging environments.
- When using this carbon fiber tubes, it is important to consider the dimensions to ensure it fits your specific application.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell M3 x 0.5mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B09956T4LQ | Model: a21020200ux0287 | PartNumber: a21020200ux0287
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M3 x 0.5 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell M8 x 0.75mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983C2Y24 | Model: a21020200ux0300 | PartNumber: a21020200ux0300
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M8 x 0.75 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 20mm / 0.79"; overall length: 66mm / 2.6"; square shank: 5mm / 0.2"; Die Size: outside diameter (OD): 25mm / 0.98"; thickness: 7mm / 0.28"
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #16
uxcell Aluminum 20 Teeth 15mm Bore 5mm Pitch Timing Belt Pulley for 20mm Belt
Asin: B0747JVWML | Model: a17042100ux1221 | PartNumber: a17042100ux1221
This Timing Belt Pulley Suits To 20Mm Timing Belt..
Package Content: 1 X Timing Belt Pulley.
Used Widely In Milling Machine, 3D Printer, Drilling Machine Or Other Machinery Transmission..
Teeth: 20; Bore Diameter: 15Mm; Pitch: 5Mm.
Features
- Material: Aluminum Alloy
- Teeth: 20; Bore Diameter: 15mm; Pitch: 5mm
- This timing belt pulley suits to 20mm timing belt.
- Used widely in milling machine, 3D printer, drilling machine or other machinery transmission.
- Package Content: 1 x Timing Belt Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 1.18 x 1.18 inches
See On Amazon #17
uxcell 25T Round Type Servo Horn Robot Arm Black Aluminum Alloy Rocker Servo Accessories Disc Steering Arm 24.5mm
Asin: B07NRY668X
- Suitable For Size: Approx.40 × 20 × 36Mm Standard Servos..
- Package Content - 1Pc X Round Servo Horn,4Pcs X Screws.
- Cnc Machined For Precision.Increased Strength And Precision..
- Mounting Hole Spacing: Approx. 17Mm, Middle Hold Diameter: Approx. 3Mm; Body Diameter: Approx. 24.5Mm, Thickness: Approx. 5Mm..
Features
- - Model: 25T; Material: CNC Aluminium Mounting; With 4 Thread Hole: M3
- - Mounting Hole Spacing: Approx. 17mm, Middle Hold Diameter: Approx. 3mm; Body Diameter: Approx. 24.5mm, Thickness: Approx. 5mm.
- - Suitable for size: Approx.40 20 36mm standard servos.
- - CNC machined for precision.Increased strength and precision.
- - Package Content - 1pc x Round Servo Horn,4pcs x Screws
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 2.36 x 2.36 inches
See On Amazon #18
uxcell 5Pcs M5 x 20mm Slotted Cylindrical Pin 304 Stainless Steel Dowel External Thread Locating Pin for Furniture Cabinets
Asin: B0CT2DTN4B
[Easy To Install] - This Cylindrical Locating Pin Features Specially Chamfered Ends, Facilitating Easy Insertion Into The Mounting Hole. This High Strength Screw Has A Specially Designed Structure, Which Ensures Precise Dimensions And Optimal Thread Patterns For Superior Strength And Performance..
[Notice] - In Order To Make Dowel Pins A Tight Fit, Your Hole Should Be Equal To Or Slightly Smaller Than The Diameter Shown..
[Wide Application] - Our Dowel Pin Steel Are Primarily Utilized In A Variety Of Applications, Including Wooden Products Like Double Beds, Bookshelves, Shelves, Outdoor Shade Sheds, And Cabinet Partitions. They Are Also Suitable For Use In Metal Devices Such As Punching Punches, Industrial Fixtures, Pin Gauges, And For Hinge Or Shaft Fixed Applications..
[Material For Shelf Support Pins] - These Cylindrical Pins Are Crafted From 304 Stainless Steel, Providing A Smooth Surface. They Exhibit Exceptional Resistance To Rust And Corrosion, Ensuring Strength, Durability, And A Prolonged Lifespan..
Features
- [Dowel Pins Size] - Size: M5 x 20mm(Thread Dia*Total L); Thread Length: 6mm/0.24-inch; Slot Width: 0.9mm/0.035-inch
- [Material for Shelf Support Pins] - These cylindrical pins are crafted from 304 stainless steel, providing a smooth surface. They exhibit exceptional resistance to rust and corrosion, ensuring strength, durability, and a prolonged lifespan.
- [Easy to install] - This cylindrical locating pin features specially chamfered ends, facilitating easy insertion into the mounting hole. This High Strength Screw has a specially designed structure, which ensures precise dimensions and optimal thread patterns for superior strength and performance.
- [Wide Application] - Our Dowel Pin Steel are primarily utilized in a variety of applications, including wooden products like double beds, bookshelves, shelves, outdoor shade sheds, and cabinet partitions. They are also suitable for use in metal devices such as punching punches, industrial fixtures, pin gauges, and for hinge or shaft fixed applications.
- [Notice] - In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Aluminum Double-Headed GT2 20 Teeth 5mm Bore Timing Belt Pulley Flange Wheel for 3D Printer
Asin: B071ZMGG63 | Model: US-SA-AJD-198628 | PartNumber: US-SA-AJD-198628
This Timing Belt Pulley Is For 3D Printer..
Package Content: 1 X Gt2 5Mm Bore Timing Pulley.
20 Contact With The Tooth Side Which Minimizes The Risk Of The Belt Slipping.
Teeth: 20T; Bore: 5Mm.
Features
- Material: Aluminum; Durable and virtually.
- Teeth: 20T; Bore: 5mm
- This timing belt pulley is for 3D printer.
- 20 contact with the tooth side which minimizes the risk of the belt slipping
- Package Content: 1 X GT2 5mm Bore Timing Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 1.18 x 1.18 inches
See On Amazon
Looking For Something Else?
Search