PowMr MPPT Solar Charge Controller 60 amp 48V 36V 24V 12V Auto - Max 160VDC Input, LCD Backlight Solar Charge Controller for Vented Sealed Gel NiCd Lithium Battery Software Update Version
Asin: B0719PGGBS | Model: MPPT-60A | PartNumber: MPPT-60A | Ean: 0615150329965, 6083351273341 | UPC: 615150329965
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.❸【Full System Protection】Backlight Lcd Dispaly Pv Voltage/Output Power/Battery Voltage/Charging Current/Working Mode/Temperature. ☀ Troubleshooting Function And Lcd Display And Can Help Users Not Only Check The Whole System Operating Data And Statuses But Also Quickly Identify System Faults And Modify Parameters..
❺【Notiction】If You Use Sealed Lead Acid, Vented Gel Battery, And Etc, You Donn't Need To Set Any Parameters, The Controller Can Adjuste Automaticly And Work Normally; But If You Use Lithium Batteries, You Need To Properly Adjuste Parameters According To The Actual Voltage Of The Battery, Becauese The Voltage Of Lithium Batteries Is Unstable, Such As Acid Battery 12V Is 12V, Lithium Battery 12V May Be 11.1V Or 14.8V..
❹【Fan Heat Dissipation】Intelligence Fan-On Temperature >45℃ And Off < 40℃,Porous Heat Dissipation.And Fan Use Bearing Technologies Increase Life Up To 5000Hrs In Normal Use. Suitable For Rvs, Commercial Vehicles, Boats, Yachts, And Solar System..
❷【Multiple Battery Adaptation】 Fit For User(Can Be Set Lithium, Lifepo4, Li(Nicomn)O2)/Vented/Flooded/Sealed/Gel/Nicd Battery. User Programmable For Absorption Voltage/Floating Voltage/Low Voltage Disconnect./Load Timer. Real-Time Energy Recording. Two Connectors For Each Pos And Negs On Solar And Batteries Connectors. Copper Wires:9Awg..
Features
- Software Update MPPT Design 100% MPPT 60A solar charge controller Intelligent, Max efficiency 98.1%, PV utilization 99%. Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller.
- Multiple Battery Adaptation Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. Two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG.
- Full System Protection Backlight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature. TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters.
- Fan Heat Dissipation Intelligence Fan-on temperature >45 and off < 40 ,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use. Suitable for RVs, Commercial Vehicles, Boats, Yachts, and Solar system.
- Notiction If you use sealed lead acid, vented gel battery, and etc, you donn't need to set any parameters, the controller can adjuste automaticly and work normally; but if you use lithium batteries, you need to properly adjuste parameters according to the actual voltage of the battery, becauese the voltage of lithium batteries is unstable, such as acid battery 12V is 12V, lithium battery 12V may be 11.1V or 14.8V.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Dimensions: 8.43 x 4.53 x 1.97 Inches | Weight: 2.87 Pounds
See On Amazon Similar To PowMr MPPT Solar Charge Controller
#1
SOGTICPS 100A MPPT Solar Charge Controller 12V 24V 36V 48V LCD Display Battery Intelligent Regulator Max 100V Input Dual USB for Lead-Acid/Lithium
Asin: B0C6F7ML23 | Model: SY10048 | PartNumber: SY10048 | Ean: 0716963493307 | UPC: 716963493307
【Safe Voltage Protection】Mppt Solar Controller With Voltage Protection, Including Battery Over-Voltage And Over-Current Protection, Power Failure Protection, Overcharge Protection, Deep Discharge Protection, Reverse Connection Protection, And Overheat Temperature Protection..
【Please Note】This Solar Controller Combines Mppt And Pwm Charging Technologies,It Delivers A High Charging Efficiency And Excellent Value For Money.While It May Not Provide 100% True Mppt Functionality, It Still Delivers Reliable Performance..
【Multiple Battery Charging Options】Compatible With Seal, Gel, Flooded, Lifepo4 Battery Charging..
【Reliable Warranty Plan】Sogticps Offers A 1-Year Warranty. Lifetime Technical Support. Please Feel Free To Contact Our Team For Technical Support And Our Engineers Can Help You Find Advice And Solutions To Any Problems You May Have..
【User-Friendly Design】The Lcd Is Designed To Dynamically Display The Operation Data And Working Status Of The Equipment.Controller Parameters Display (Working Mode, Battery Voltage, Pv Charging Current, Battery Discharging Current, Product Working Temperature, Delay Time)..
【Multi-Functional Design】Multi-Function Lcd With Backlight Display And Clock Display, 7 Operating Modes: Charging Mode, Light Control Mode, Light Control + Time Delay Control Mode, Universal Control Mode, Manual Control Mode, Timing Control Mode..
Features
- Advanced MPPT Technology SOGTICPS 100A MPPT solar controller with advanced MPPT maximum power point tracking technology algorithm, 12V/24V/36V/48V automatic recognition; dual USB 5V charging ports,and the maximum power point of the pv array can be quickly tracked in any environment ,tracking efficiency not less than 99.5%. and significantly improve the utilization of energy in solar system.
- Multi-functional design Multi-function LCD with backlight display and clock display, 7 operating modes: charging mode, light control mode, light control + time delay control mode, universal control mode, manual control mode, timing control mode.
- Safe voltage protection MPPT solar controller with voltage protection, including battery over-voltage and over-current protection, power failure protection, overcharge protection, deep discharge protection, reverse connection protection, and overheat temperature protection.
- User-Friendly Design The LCD is designed to dynamically display the operation data and working status of the equipment.Controller parameters display (working mode, battery voltage, PV charging current, battery discharging current, product working temperature, delay time).
- Multiple battery charging options Compatible with Seal, GEL, Flooded, LifePO4 battery charging.
- Reliable warranty plan SOGTICPS offers a 1-year warranty. Lifetime technical support. please feel free to contact our team for technical support and our engineers can help you find advice and solutions to any problems you may have.
- Please note This solar controller combines MPPT and PWM charging technologies,It delivers a high charging efficiency and excellent value for money.While it may not provide 100% true MPPT functionality, it still delivers reliable performance.
- See more on Amazon...
Brand: SOGTICPS | Manufacturer: SOGTICPS
Dimensions: 7.24 x 7.67 x 2.59 inches
See On Amazon #2
60A Solar Charge Controller MPPT 12V 24V 36V 48V Controller 60amp Solar Charge Regulator MPPT 150V w/LCD Display Work with AGM, Gel, Flooded and Lithium
Asin: B09XQR741D | Model: MPPT 60A/12V 24V 36V 48V | PartNumber: MPPT 60A/12V 24V 36V 48V
【12V/24V/36V/48V Battery Support】Negative Grounding Design Controller More Safe, Controller Compatible With A Variety Of Batteries(Lead-Acid And Lithium, User Customize); Sealed, Gel, Flooded And Li (Lfp) Battery Charging Parameter Pre-Set, Other Battery Can Be Customize Charging Parameter According Your Need..
【Full Charging Protections】Short Circuit/Overcurrent/Reverse Polarity,Etc.Protections; Very Detail Lcd Screen And 4 Buttons Make This Solar Controller Very Simple To Use. Fast Service Support And Simple And Detail Wiring Instruction Avaiable..
【 0 Layer Mppt Charge Controller】Easy To Know Controller's Working State And Process In One Glance.
【Wide Range Solar Voltage/Power Support】Controller Support High Pv Input Power/Voltage. Controller Can Accept Solar Voltage Up To 190V. When Battery Is 12V System: Suggest Solar Power 720W, Suggest Range:Dc20v~Dc80v；1440W 105V When 24V; 2100W 150 When 36V; 2800W 150V When 48V..
Features
- 60A MPPT CHARGING CONTROLLER 4-stage battery charging algorithm for a rapid, efficient , safe charging(Bulk Charge, Boost Charge, Float Charge,and Equalization), 60amp Rate Charging current.
- WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT Controller support High PV Input Power/voltage. Controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V 1440W 105V when 24V; 2100W 150 when 36V; 2800W 150v when 48V.
- 12V/24V/36V/48V BATTERY SUPPORT Negative grounding design controller more safe, controller Compatible with a variety of batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according your need.
- 0 layer MPPT charge controller Easy to know controller's working state and process in one glance
- FULL CHARGING PROTECTIONS Short Circuit/Overcurrent/Reverse Polarity,etc.protections; Very detail LCD screen and 4 buttons make this solar controller very simple to use. Fast service support and Simple and detail wiring instruction avaiable.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Dimensions: 2.81 x 9.10 x 6.50 Inches
See On Amazon #3
10A 12V MPPT Solar Charge Controller,PowMr Small Portable Solar Panel Regulator with LCD Display,Long Press Switching of Battery Type,for 12 Volt Gel AGM Lithium LiFePO4 Battery
Asin: B0CHVQPN2R | Model: RV-10A | PartNumber: RV-10A
【Suitable For A Wide Range Of Batteries】Compatible With A Wide Range Of 12V Batteries Such As Agm, Gel, Deep Cycle, Sealed, Lead Acid, Liquid Rich And Lifepo4 Lithium Batteries. Ideal For Deep Cycle, Starter, Marine, Automotive, Powersports And More..
Note: 1. Designed For 12V Battery, Please Do Not Connect Higher Voltage Battery. 2. Pv Voc Needs To Be Higher Than The Battery Voltage, The Minimum Is 15V, The Maximum Do Not Exceed 30V. 3. Connection Order: Connect The Battery First, And Then Connect The Solar Panel..
【Ip45 Waterproof Performance】The Controller Has Good Waterproof Performance, You Can Do Daily Life Waterproof No Need To Worry. (Warm Tips: In Order To Extend The Service Life, Please Do Not Immerse The Controller In Water.).
【Easy To Use】Sae Connectors Are Quick To Connect Or Disconnect, Plug And Play, Convenient And Practical..
【Comprehensive Protection】The Controller Has A Built-In Safety Protection System And An Intelligent 3-Stage Charging Mode (Equalization, Float Charging, Boosting), Which Gives You Efficient And Safe Charging Efficiency And Also Fully Protects Your Batteries From Over-Charging, Over-Discharging, Over-Voltage, Over-Current, Overloading, Short-Circuiting, Reversing Polarity And Other Safety Protections, Which Makes It Safer To Use..
【Portable Mini Charge Controller】Mini Mppt Solar Charge Controller Is Equipped With Lcd Display And One-Touch (Need To Long Press The Button) Button To Change The Battery Type, Which Is Convenient For You To Monitor The Working Status Of Solar Panel And Battery. Compared With Other Controllers, It Can Be Easily Carried And Save Space. Perfect For Outdoor Use..
Features
- 100% Efficient MPPT Charge Controller PowMr newly upgraded 10A MPPT solar charge controller for 12V battery systems with maximum power point tracking means maximizing the use of solar energy to charge your batteries can help you save a lot of charging time compared to other products.
- Portable Mini Charge Controller Mini MPPT solar charge controller is equipped with LCD display and one-touch (need to long press the button) button to change the battery type, which is convenient for you to monitor the working status of solar panel and battery. Compared with other controllers, it can be easily carried and save space. Perfect for outdoor use.
- Suitable for a wide range of batteries Compatible with a wide range of 12V batteries such as AGM, Gel, Deep Cycle, Sealed, Lead Acid, Liquid Rich and LiFePO4 Lithium batteries. Ideal for deep cycle, starter, marine, automotive, powersports and more.
- Comprehensive Protection The controller has a built-in safety protection system and an intelligent 3-stage charging mode (equalization, float charging, boosting), which gives you efficient and safe charging efficiency and also fully protects your batteries from over-charging, over-discharging, over-voltage, over-current, overloading, short-circuiting, reversing polarity and other safety protections, which makes it safer to use.
- IP45 waterproof performance The controller has good waterproof performance, you can do daily life waterproof no need to worry. (Warm tips: In order to extend the service life, please do not immerse the controller in water.)
- Easy to use SAE connectors are quick to connect or disconnect, plug and play, convenient and practical.
- Note: 1. Designed for 12V battery, please do not connect higher voltage battery. 2. PV Voc needs to be higher than the battery voltage, the minimum is 15V, the maximum do not exceed 30V. 3. Connection order: connect the battery first, and then connect the solar panel.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
See On Amazon #4
PowMr 60a Charge Controller - Solar Panel Charge Controller 12V 24V, Max 48V 1560W Input Adjustable Parameter LCD Display Current / Capacity and Timer Setting ON/Off with 5V Dual USB
Asin: B085VQN5RK | Ean: 0655160052880 | UPC: 655160052880
🙌 This Solar Charge Controller Fit For Lead-Acid Batteries (Open,Agm,Gel) With Mutiple Load Timer. Load Should Be Dc. For Protecting The Lifespan Of Your Battery, Once The Voltage Of The Battery Drop Below 8V, The Solar Controller Will Turn Off Automatically..
🙌 Pwm Charge Controller Protection - Dual Mosfet Reverse Current/ Over Heat /Under-Voltage Discharge Discharge / Short-Circuit / Open-Circuit / Over-Load/ Over-Charging Protection. More Safe Using For Home, Industrial, Commercial Etc..
🙌 Backlight Lcd Display Pv/ Battery/ Load Charge And Discharge Parameter. Adjustable Floating Voltage/ Lvd/ Lvr/ Load Timer According Needs For This Charge Controller. Add Feature: Charge And Discharge Current, Charge And Discharge Energy Recording Function..
Features
- This 60a charge controller compatibility with 12V and 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float), 12V(780W) / 24V(1560W) input, Dual USB can give your electronic product max 5V 2A.
- Backlight LCD display PV/ Battery/ Load charge and discharge parameter. Adjustable Floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. ADD Feature: Charge and Discharge Current, Charge and Discharge energy recording function.
- This solar charge controller fit for Lead-acid batteries (OPEN,AGM,GEL) with mutiple load timer. Load should be DC. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
- PWM charge controller Protection - Dual MOSFET Reverse current/ over heat /Under-voltage discharge discharge / short-circuit / open-circuit / over-load/ over-charging protection. More safe using for home, industrial, commercial etc.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
See On Amazon #5
Renogy 100A 12V/24V/36V/48V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery, Rover 100A,Black
Asin: B07KG7PD7V | Model: Rover 100 Amp 12/24/36/48V | PartNumber: Rover 100 Amp 12/24/36/48V | Ean: 0816360029472 | UPC: 816360029472
【Full System Protection】Meant To Safeguard Your System, The Self-Diagnostic Capability Can Assess And Protect Against Reverse Polarity, Battery Overcharging, Battery Over-Discharging, Overload, Short-Circuiting, And Reverse Current..
【Work With Renogy One】 Add Renogy One M1 To Achieve Smart Energy Monitoring With Intuitive Visuals And Real-Time Data. This All-In-One Display Provides You Access To Accurate Energy System Data Anywhere, Anytime Via The Dc Home App..
【4-Stage Safely Charging】Features 4-Stage Charging (Bulk, Absorption, Float, And Equalization) Of Lead Acid Batteries And 2-Stage Charging (Bulk And Absorption) For Lithiuim Batteries As Well As Lithium Reactivation.
【Multiple Battery Adaptation】 Compatible With Various Deep Cycle Battery Options: Agm, Sealed, Gel, Flooded And Lithium..
【Easy To Use Lcd】 Lcd Screen And Multiple Led Indicators For Displaying System Operation Information, Customizable Parameters, And Error Codes..
【12/24/36/48V Automatically Detect】Automatically Detects 12V, 24V, 36V Or 48V Dc System Voltages (For Non-Lithium Batteries), Which Is Suitable For Rvs, Commercial Vehicles, Boats, Yachts, And Any Off-Grid System..
Features
- Innovative MPPT Design Die-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
- 12/24/36/48V Automatically Detect Automatically detects 12V, 24V, 36V or 48V DC system voltages (for non-lithium batteries), which is suitable for RVs, Commercial Vehicles, Boats, Yachts, and any off-grid system.
- Full System Protection Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current.
- Easy to use LCD LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes.
- 4-Stage Safely Charging Features 4-stage charging (Bulk, Absorption, Float, and Equalization) of Lead Acid Batteries and 2-stage charging (Bulk and Absorption) for Lithiuim batteries as well as Lithium Reactivation
- Multiple Battery Adaptation Compatible with various Deep Cycle battery options: AGM, Sealed, Gel, Flooded and Lithium.
- Work With RENOGY ONE Add Renogy ONE M1 to achieve smart energy monitoring with intuitive visuals and real-time data. This all-in-one display provides you access to accurate energy system data anywhere, anytime via the DC Home app.
- See more on Amazon...
First Available: 03/25/2020
Brand: Renogy | Manufacturer: Renogy
Dimensions: 4.35 x 12.00 x 17.44 Inches | Weight: 22.00 Pounds
Warranty: 2-year material and workmanship warranty
See On Amazon #6
PowMr 60AMP MPPT Charg Controller, Fit for 12V 24V 36V 48V Lead-Acid Lithium Battery, MAX 160V 2880W Input Solar Charge Controller
Asin: B08TWK76X4 | Model: NEW MPPT 60A Controller | PartNumber: NEW MPPT 60A Controller | Ean: 0700512707809 | UPC: 700512707809
【12V/24V/36V/48V Battery Support】Negative Grounding Design Controller More Safe, Controller Compatible With A Variety Of Batteries(Lead-Acid And Lithium, User Customize); Sealed, Gel, Flooded And Li (Lfp) Battery Charging Parameter Pre-Set, Other Battery Can Be Customize Charging Parameter According Your Need..
【Full Charging Protections】Short Circuit/Overcurrent/Reverse Polarity,Etc.Protections; Very Detail Lcd Screen And 4 Buttons Make This Solar Controller Very Simple To Use. And Detail Troubleshooting List, Fast Service Support And Simple And Detail Wiring Instruction Avaiable..
【0 Layer Mppt Charge Controller】Easy To Know Charging Process In One Glance..
【Controller Wide Range Solar Voltage/Power Support】Controller Support High Pv Input Power/Voltage. Controller Can Accept Solar Voltage Up To 190V. When Battery Is 12V System: Suggest Solar Power 720W, Suggest Range:Dc20v~Dc80v；1440W 105V When 24V; 2100W 150 When 36V; 2800W 150V When 48V..
Features
- 60A MPPT CHARGING CONTROLLER 4-stage battery charging algorithm for a rapid, efficient , safe charging(Bulk Charge, Boost Charge, Float Charge,and Equalization), 60amp Rate Charging current.
- Controller WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT Controller support High PV Input Power/voltage. Controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V 1440W 105V when 24V; 2100W 150 when 36V; 2800W 150v when 48V.
- 12V/24V/36V/48V BATTERY SUPPORT Negative grounding design controller more safe, controller Compatible with a variety of batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according your need.
- 0 layer MPPT charge controller Easy to know Charging process in one glance.
- FULL CHARGING PROTECTIONS Short Circuit/Overcurrent/Reverse Polarity,etc.protections; Very detail LCD screen and 4 buttons make this solar controller very simple to use. And detail troubleshooting list, Fast service support and Simple and detail wiring instruction avaiable.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Dimensions: 2.81 x 6.50 x 9.10 Inches
See On Amazon #7
PowMr 60A MPPT Solar Charge Controller 12V 24V 36V 48V Auto, Solar Charge Regulator 60amp w/Large LCD Display, Work with AGM, Gel, Flooded and Lithium Batteries,Plug-and-Play Update Version
Asin: B0CHQ9V1R6 | Model: POW-M60-MAX | PartNumber: POW-M60-MAX
【 0 Layer Mppt Charge Controller】Equipped With 0 Led Screen, Which Can Display The Status Of Pv Input Voltage/Power, Battery Voltage, Charging Current, Charging Power, And The Button Can Be Used To Change The Battery's Type. Easy To Know The Controller's Working State And Process In One Glance. A Very Detailed Lcd Screen And 4 Buttons Make This Solar Controller Very Simple To Use. Fast Service Support And Simple And Detailed Wiring Instructions Are Available..
【Excellent Heat Dissipation & Multiple Protections】Mppt Controller 60Amp Is Made Of Die-Cast Aluminum, Which Ensures Excellent Heat Dissipation To Reduce Power Loss. In Addition, The Multiple Protections Built Into The Solar Charge Controller Can Ensure That The Controller Is Protected From Reverse Connection, Overcurrent, Short-Circuit, And Over-Temperature..
【99% Tracking Technology】Mppt 60A Solar Charge Controller With Advanced Maximum Power Point Tracking Technology Can Continuously Track The Array’S Maximum Power Point To Get The Maximum Amount Of Power To Charge The Battery. The Tracking Efficiency Is Not Less Than 99% And Peak Conversion Efficiency Is Up To 97%..
【Compatible With Multiple Batteries】Negative Grounding Design Controller Safer, 60A Charge Controller Compatible With A Variety Of 12/24/36/48V Batteries(Lead-Acid And Lithium, User Customize); Sealed, Gel, Flooded And Li (Lfp) Battery Charging Parameter Pre-Set, Other Battery Can Be Customized Charging Parameter According To Your Need. Adapt A 4-Stage Battery Charging Algorithm For Rapid, Efficient, Safe Charging(Bulk Charge, Boost Charge, Float Charge, And Equalization).
Features
- Wide Range Voltage/Powe Support 60a Solar Controller supports High PV Input Power/Voltage. The charger controller can accept Solar voltage up to 190V. When battery is 12V system: Suggest Solar power 720W, suggest range: DC20V~DC80V; 1440W 37~105V when in 24V; 2160W 50~160 when in 36V; 2880W 72-160v when in 48V.
- Compatible with Multiple Batteries Negative grounding design controller safer, 60a charge controller compatible with a variety of 12/24/36/48V batteries(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customized charging parameter according to your need. adapt a 4-stage battery charging algorithm for rapid, efficient, safe charging(Bulk Charge, Boost Charge, Float Charge, and Equalization)
- 0 layer MPPT Charge Controller Equipped with 0 LED screen, which can display the status of PV input voltage/power, battery voltage, charging current, charging power, and the button can be used to change the battery's type. Easy to know the controller's working state and process in one glance. A very detailed LCD screen and 4 buttons make this solar controller very simple to use. Fast service support and Simple and detailed wiring instructions are available.
- 99% Tracking Technology MPPT 60A Solar Charge Controller with advanced Maximum Power Point Tracking technology can continuously track the array s maximum power point to get the maximum amount of power to charge the battery. The tracking efficiency is not less than 99% and peak conversion efficiency is up to 97%.
- Excellent Heat Dissipation & Multiple Protections MPPT Controller 60amp is made of die-cast aluminum, which ensures excellent heat dissipation to reduce power loss. In addition, the multiple protections built into the solar charge controller can ensure that the controller is protected from Reverse Connection, Overcurrent, Short-circuit, and Over-temperature.
- See more on Amazon...
Brand: Temank | Manufacturer: Temank
Warranty: Manufacturer warranty for 365 days from date of purchase.
See On Amazon #8
PowMr MPPT Solar Charge Controller 60A,12V/24V/36V/48V Auto 60 amp Solar Charge Controller Backlight LCD Display Solar Panel Regulator Charge Controller for Sealed Lead Acid Flooded Gel and Li Battery
Asin: B09YRQRYRM
【Multiple Battery Adaptation】Automatically Detects 12V, 24V, 36V Or 48V Dc System Voltages, Compatibility With Multiple Battery Types For Convenient Use: Sealed Lead-Acid, Flooded, Gel Or Lithium Batteries Which Must Be Deep Cycle, Which Is Suitable For Rvs, Commercial Vehicles, Boats, Yachts, And Any Off-Grid System..
【Full System Protection】Customizable Charging Voltages, Overcharging, Over-Discharging Protection; Meant To Safeguard Your System, The Self-Diagnostic Capability Can Assess And Protect Against Pv Array Short Circuit; Pv Overcurrent;Load Overload;Load Short Circuit;Pv Reverse Polarity;Battery Reverse Polarity;Over-Temperature..
【4-Stage Safely Charging】Features 4-Stage Charging : Bulk Charge, Boost Charge, Float Charge, And Equalization, For A Rapid, Efficient , Safe Battery Charging, Avoid Too Much Gas Precipitation Or Overheating Of The Battery..
【Upgraded 0 Layer Design】0 Layer, Easy Installation, Easy Setup; Simply Connect The Batteries, And The Controller Will Automatically Determine The Battery Voltage. Multifunctional Backlight Lcd Display For Displaying System Operation Information, Customizable Parameters, And Error Codes..
Features
- Excellent heat dissipation Die-cast aluminum design ensures good heat dissipation performance, reduces noise and saves energy; Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
- Upgraded 0 Layer Design 0 Layer, easy installation, easy setup; Simply connect the batteries, and the controller will automatically determine the battery voltage. Multifunctional Backlight LCD display for displaying system operation information, customizable parameters, and error codes.
- Multiple Battery Adaptation Automatically detects 12V, 24V, 36V or 48V DC system voltages, Compatibility with multiple battery types for convenient use: sealed lead-acid, flooded, gel or lithium batteries which must be deep cycle, which is suitable for RVs, Commercial Vehicles, Boats, Yachts, and any off-grid system.
- 4-Stage Safely Charging Features 4-stage charging : Bulk Charge, Boost Charge, Float Charge, and Equalization, for a rapid, efficient , safe battery charging, avoid too much gas precipitation or overheating of the battery.
- Full System Protection Customizable charging voltages, Overcharging, over-discharging protection; Meant to safeguard your system, the self-diagnostic capability can assess and protect against PV Array Short Circuit; PV Overcurrent;Load Overload;Load Short Circuit;PV Reverse Polarity;Battery Reverse Polarity;Over-Temperature.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
See On Amazon #9
PowMr Boost Solar Charge Controller 24V36V/48V/60V/72V 10A MPPT Charge Controller Solar Panel Regulator for Sealed Gel FLD Lead-Acid and Li Battery for Golf Carts Electric Vehicles and Solar System
Asin: B08HPC7PNN | Model: Boost-10A | PartNumber: Boost-10A | Ean: 0655160051944 | UPC: 655160051944
【Efficient Charging】Innovative Mppt Technology With Tracking Efficiency Of Up To 99% And Peak Conversion Efficiency Of Up To 98%; Reducing Power Consumption; Natural Convection Cooling, Almost Silent Operation, Reducing Heat Generation, And Lowering Operating Temperature,Extand Battery And Controller Life.
【Multiple Electronic Protections】The Boost-Type Solar Charge Controller Integrates Multiple Protection Mechanisms, Including Overcharge, Short Circuit, And Reverse Current Protection. These Measures Safeguard Your Equipment And Batteries From Damage, Providing Reliable And Secure Charging Performance.
【Lithium Battery Activation】Compatible With Li-Ion (Lifepo₄) Batteries; When The Battery Type Parameter Is Set To Lithium Battery The Charge Cycle Settings Are Altered To Suit. Moreover, When The Connected Lithium Battery Is In A Protected State, The Controller Will Activate The Lithium Battery Using The Energy From The Solar Panel With A Current That Does Not Exceed The Lithium Battery's Protection Voltage And Current Range.
【Wide Range Applications 】Increasing Driving Distance Includes: Electric Vehicles, Golf Carts, Scooters, Trikes, And More; Compatible With Multiple Battery Type, Such As Sealed, Gel And Fld Lead-Acid And Ternary Lithium Battery And Lithium Iron Phosphate Battery.
Features
- Boost Charging Boosts the voltage of 15V to 60V solar panels to charge 24V to 72V batteries in Golf Cart, Electric Vehicles, and Solar System Kit. Designed for scenarios where the photovoltaic input voltage is lower than the battery voltage, this controller effectively boosts the voltage to match the battery's charging requirements. No need to add additional solar panels or change the connection of solar panels
- Wide Range Applications Increasing driving distance includes: electric vehicles, golf carts, scooters, trikes, and more; compatible with multiple battery type, such as Sealed, Gel and FLD lead-acid and Ternary lithium battery and Lithium iron phosphate battery
- Efficient Charging Innovative MPPT technology with tracking efficiency of up to 99% and peak conversion efficiency of up to 98%; reducing power consumption; Natural convection cooling, almost silent operation, reducing heat generation, and lowering operating temperature,extand battery and controller life
- Lithium Battery Activation Compatible with Li-ion (LiFePO ) batteries; when the battery type parameter is set to Lithium battery the charge cycle settings are altered to suit. Moreover, when the connected lithium battery is in a protected state, the controller will activate the lithium battery using the energy from the solar panel with a current that does not exceed the lithium battery's protection voltage and current range
- Multiple Electronic Protections The Boost-Type Solar Charge Controller integrates multiple protection mechanisms, including overcharge, short circuit, and reverse current protection. These measures safeguard your equipment and batteries from damage, providing reliable and secure charging performance
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Dimensions: 1.97 x 5.51 x 3.35 Inches | Weight: 0.48 Pounds
See On Amazon #10
MPPT Solar Charge Controller 80 amp, 12v 24v 36v 48v auto Battery Regulator MAX PV Input 150V, Solar Charger Support Sealed, Gel, Flooded, and Lithium Batteries
Asin: B09Q7PBC2Y | Model: AP-80A | PartNumber: AP-80A
150Voc Max Pv Input Voltage, Maximum Effeciency Up To 99%.
Multiple Protections: Overcharge/Over Discharge/ Overheat/Reverse/Overload/Short-Circuit Protection.
Rs485 Communication: Capable Of Wi-Fi Remote Monitoring (Additional Purchase Required) - Realize Real-Time Wireless Monitoring Function Of Solar Controller By App, Simple And Convenient To Set, One-Key Restore The Factory Settings. Suitable For Andriod & Ios System..
Solar Panel: Suitable For 1140W (12V); 2260W (24V); 3420W (36V); 4540W (48V).
Automatic Battery Voltage Detection（12V/24V/36V/48V）.
Features
- Compatible with sealed, gel, flooded, and lithium batteries
- Automatic battery voltage detection 12V/24V/36V/48V
- 150Voc max PV input voltage, Maximum effeciency up to 99%
- Solar panel: suitable for 1140W (12V); 2260W (24V); 3420W (36V); 4540W (48V)
- Multiple protections: overcharge/over discharge/ overheat/reverse/overload/short-circuit protection
- RS485 communication: Capable of Wi-Fi remote monitoring (Additional purchase required) - Realize real-time wireless monitoring function of solar controller by APP, Simple and convenient to set, One-key restore the factory settings. Suitable for Andriod & IOS system.
- See more on Amazon...
Brand: OAE | Manufacturer: top one power
Dimensions: 12.40 x 7.90 x 3.50 Inches
See On Amazon #11
PowMr 80A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V/36V/48V PWM Auto Paremeter Adjustable LCD Display for AGM, Gel, Flooded and Lithium Battery
Asin: B0BXPC48VS | Model: 80A | PartNumber: 80A
14 Type Battery Compatibility : Compatible With Various 12V 24V 36V Or 48V Batteries, Such As Sel, Use, Fld, Gel, Lifepo4 And Ternary Lithium Battery; With Clear And Special Icons For Various Lithium Batteries On The Lcd Screen, Easy Select Battery Type; Support User-Defined Batteries And Calibrate Battery Voltage..
Multiple Protections: Equipped With Against Overheating, Automatically Stops Charging, Against Output Short Circuit., Against Over Discharging, Against Reverse Polarity Connection And Limit The Maximum Charging Current Protection, Ensure Safe To Use; Natural Convection, Cool Air Heat Dissipation, Complete Silence..
Easy-Read Backlit Display: Built-In Backlight Lcd Screen, Real-Time Monitor And Control Charging: Charging Current, Generated Energy, Temperature, Battery Voltage, And Error Codes, Fast And Easy Set And Commiss Parameter; No Matter How Users Switch Display Screen, It Will Automatically Return To Default Display Screen After No Button Is Pressed For 100 Seconds..
3-Stage Pwm Technology: The Controller Is Equipped With Advanced Smart Pwm Technology With High Charging Efficiency, Through Three Stages Charge Modes(Bulk, Boost, Float), Fast, Efficientand Safe Battery Charge, Effectively Extend The Battery Life; Combination Of Solar Light Control And Time Control, Freely Adjust The Load Enable Duration..
Features
- UPGRADED SOLAR CHARGE CONTROLLER: Auto detect 12V 24V 36V 48V system, Max PV input voltage 100 volts, Max. Input Power: 960W-3840W;Compatible with lithium-ion and lead-acid battery, support user-defined batteries, Built-in Dual USB output 5V/2.5A (max), charging for your mobile phone, tablet, PCs.
- 3-STAGE PWM Technology: The controller is equipped with advanced smart PWM technology with high charging efficiency, through three stages charge modes(Bulk, boost, float), fast, efficientand safe battery charge, effectively extend the battery life; combination of solar light control and time control, freely adjust the load enable duration.
- 14 TYPE BATTERY COMPATIBILITY : Compatible with various 12v 24V 36V or 48v batteries, such as SEL, USE, FLD, GEL, LiFePO4 and ternary lithium battery; with clear and special icons for various Lithium batteries on the LCD screen, easy select battery type; support user-defined batteries and calibrate battery voltage.
- EASY-READ BACKLIT DISPLAY: Built-in Backlight LCD Screen, real-time monitor and control charging: charging current, generated energy, temperature, battery voltage, and error codes, fast and easy set and commiss parameter; No matter how users switch display screen, it will automatically return to default display screen after no button is pressed for 100 seconds.
- MULTIPLE PROTECTIONS: Equipped with against overheating, automatically stops charging, against output short circuit., against over discharging, against reverse polarity connection and Limit the maximum charging current protection, ensure safe to use; natural convection, cool air heat dissipation, complete silence.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Dimensions: 2.36 x 7.36 x 5.20 Inches
See On Amazon #12
PowMr Solar hybrid Inverter 3200W 24VDC to 220-230VAC,Built in 80A MPPT Solar Charge Controller,Off-Grid Pure sine Wave Inverter,Work with 24V Lead Acid & Lithium Battery,Solar Power Utility Generator
Asin: B09NSG2971
🌞【Led Display & Smart Cooling Fan】The 3200W Power Inverter Is Designed With Lcd Display And 3 Led Indicators, Which Can Dynamically Display System Data And Operation Status, And The Intelligent Variable Speed Fan Can Efficiently Dissipate Heat And Extend System Life..
🌞【Diversifies Uses】24V Inverter With Smart Battery Charger Design For Optimized Battery Performance; Compatible With Mains Voltage Or Generator Power; Can Be Accessed To A Variety Of Household And Office Loads, Including Refrigerators, Lamps, Televisions, Fans, Air Conditioning And Other Loads. 4 Charging Modes Support: Utility First, Solar First,Solar&Utility And Battery & Solar..
🌞【Compatible Battery Type】3200 Watt Solar Inverter Activates Lithium Batteries Via Pv Solar Or Utility Power, Allowing Access To 24V Lead-Acid (Sealed, Agm, Gel, Rechargeable) Batteries And Lithium Batteries,And Has A Battery Cold Start Function (23V)..
🌞【Technical Parameters】60A Mppt Solar Charging Inverter, Max. Pv Array Power: 3000W, Max.Pv Open Circuit Voltage: 400Vdc; Starting Voltage >90V, Max. Charging Current:80A, Pv Array Mppt Voltage Range: 30~400Vdc; Cold Start Function(23V)..
Features
- 3200W SOLAR INVERTER 3200W Off-Grid 24V Solar Inverter Built-in 60A MPPT Charge Controller, Pure Sine Wave Inverter Single-phase output 230VAC, 3.2kw new all-in-one inverter combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in a single package.(Note: This is a single-phase 220V output inverter, please buy with caution.) (A transformer can be connected to make its output voltage 110V.)
- TECHNICAL PARAMETERS 60A MPPT Solar Charging Inverter, MAX. PV Array Power: 3000W, Max.PV Open Circuit Voltage: 400Vdc; Starting voltage >90V, MAX. Charging Current:80A, PV Array MPPT Voltage Range: 30~400Vdc; Cold start function(23V).
- LED Display & Smart Cooling Fan The 3200W power inverter is designed with LCD display and 3 LED indicators, which can dynamically display system data and operation status, and the intelligent variable speed fan can efficiently dissipate heat and extend system life.
- Compatible Battery Type 3200 watt solar inverter activates lithium batteries via PV solar or utility power, allowing access to 24V lead-acid (sealed, AGM, gel, rechargeable) batteries and lithium batteries,and has a battery cold start function (23V).
- DIVERSIFIES USES 24V Inverter with Smart battery charger design for optimized battery performance; Compatible with mains voltage or generator power; Can be accessed to a variety of household and office loads, including refrigerators, lamps, televisions, fans, air conditioning and other loads. 4 charging modes support: Utility first, Solar first,Solar&Utility and Battery & Solar.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Weight: 12.98 pounds
See On Amazon #13
PowMr 10200W Solar Inverter 48V DC to 220V/230V AC Pure Sine Wave Power Inverter Built-in 180A MPPT Controller 10000W Hybrid Inverter for Home RV Off-Grid System, for 48V Lead Acid and Lithium Battery
Asin: B0C6LWNXDK
【Rgb Light Mode】Full New Design, Rgb Lingthing For Different Working Mode(Purple-Pv Mode;Red-Battery Mode;Blue-Utility Mode); Equiped With Backlight Lcd Screen, Browse And Set Parameters At Any Time; One Click Restore To Default Settings, The Inverter Can Restore System Settings With One Click In Case Of Setting Errors, To Avoid Machine Damage Caused By Setting Errors..
【Comprehensive Protection】Built-In Anti-Dust Kit, Keeps Dust Far From Your Inverter And Increases Product Reliability In Harsh Environment; Equiped With Three Cooling Fan, Efficient And Fast Heat Dissipation, Extending Inverter Life; Cold Start Function, Cold Start Voltage 46Vdc; Offer Multiple Protection, Such As Overload/ Over Temperature/Short Circuit Protection..
【Multiple Charging Modes】The 10200 Off Grid Solar Inverter Have 3 Charging Modes Are Optional, I.E. Solar First(Cso), Solar And Utility(Snu ) (Default) & Only Solar(Oso) And 3 Output Modes Are Available, I.E. Solar Frist, Mains Frist And Sbu Priority, Uninterrupted Power Supply To Meet Different Application Requirements..
【Dual Pv Input And Dual Ac Output】Dual Pv Input, Offer Uninterrupted Power Supply; Dual Ac Output, Up To 10200W Output For Rv Camping Boat Home Emergency Ect.. Can Be Accessed To A Variety Of Household And Office Loads, Including Oven, Rice Cooker, Lamps, Televisions, Fans And Other Ac Loads. Compatible To Mains Voltage Or Generator Power, Auto Restart While Ac Is Recovering..
Features
- New Upgrade 10.2KW Solar Inverter Output Voltage:220V-230V, Max.PV Array Power: 10200W; Max.PV Input VOC: 500V DC, Starting voltage:120VDC; Voltage range: 90-450VDC;Max Charging Current(AC charger plus solar charger): 180A, Max AC Charging Current 160A, Max AC Input Voltage: 300V; fit for 48V Lead-Acid (Seal, AGM,Gel, Flooded) and Lithium battery.
- Dual PV Input and Dual AC Output Dual PV Input, offer uninterrupted power supply; Dual AC Output, Up to 10200W Output for RV Camping Boat Home Emergency ect.. Can be accessed to a variety of household and office loads, including Oven, rice cooker, lamps, televisions, fans and other AC loads. Compatible to mains voltage or generator power, Auto restart while AC is recovering.
- RGB Light Mode Full new design, RGB lingthing for different working mode(Purple-PV Mode;Red-Battery Mode;Blue-Utility Mode); equiped with backlight LCD Screen, browse and set parameters at any time; One click restore to default settings, the inverter can restore system settings with one click in case of setting errors, to avoid machine damage caused by setting errors.
- MULTIPLE CHARGING MODES The 10200 Off Grid Solar Inverter have 3 charging modes are optional, i.e. Solar First(CSO), Solar and Utility(SNU ) (default) & Only Solar(OSO) and 3 output modes are available, i.e. Solar Frist, Mains Frist and SBU Priority, uninterrupted power supply to meet different application requirements.
- Comprehensive Protection Built-in Anti-dust Kit, keeps dust far from your inverter and increases product reliability in harsh environment; Equiped with Three Cooling fan, efficient and fast heat dissipation, extending inverter life; Cold start function, cold start voltage 46VDC; Offer multiple protection, such as Overload/ Over temperature/short circuit protection.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Dimensions: 5.07 x 20.94 x 15.21 inches
See On Amazon #14
PowMr 30A PWM Solar Controller, 12V 24V 36V 48V Auto with LCD Display, Dual USB Output Charge Controller for AGM, Gel, Flooded, Lead-Acid and Lithium Battery
Asin: B087BC9X4S | Model: BSC3048 | PartNumber: BSC3048 | Ean: 0655160053290 | UPC: 655160053290
【Compatible Battery Types】Compatible With 12V 24V 36V 48V Battery Systems, Adaptable To User, Flooded, Agm, Gel, Lifepo4, Lithium, And Other Customized Battery Types. Charge Controllers For Solar Panels Should Connect The Battery First, Then The Solar Panel, And Finally The Load..
【Lcd Display】Comes With An Lcd Display Showing Accurate And Timely Information Including Charging Current, Generated Energy, Temperature, Battery Voltage, And Error Codes That Allows Users To Monitor And Control Charging..
【Multiple Protection Functions】Equipped With Overcharge Protection, Overcharge Protection, Overload Protection, Short Circuit Protection And Reverse Current Protection. This 60A Solar Charging Controller Will Help You Improve The Safety Of The Photovoltaic System And Extend The Battery Life..
【4-Stage Pwm Technology】The Controller Is Equipped With Advanced Smart Pwm Technology With High Charging Efficiency. It Provides 4-Stage Charging (Bulk, Absorption, Float And Equalization) In Order To Protect The Battery..
Features
- Solar Charge Controller Auto detect 12V 24V 36V 48V system; Discharge Current is 30A; Max PV input voltage 100 volts; Built-in Dual USB output 5V/2A to support mobile phone charging.
- 4-STAGE PWM Technology The controller is equipped with advanced smart PWM technology with high charging efficiency. It provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery.
- Compatible Battery Types Compatible with 12v 24V 36V 48v battery systems, Adaptable to User, Flooded, AGM, GEL, LifePO4, Lithium, and other customized battery types. Charge controllers for solar panels should connect the battery first, then the solar panel, and finally the load.
- Multiple Protection Functions Equipped with overcharge protection, overcharge protection, overload protection, short circuit protection and reverse current protection. This 60A solar charging controller will help you improve the safety of the photovoltaic system and extend the battery life.
- LCD Display Comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
See On Amazon #15
60A Solar Charge Controller MPPT 12V 24V 36V 48V Controller 60amp Solar Charge Regulator , max 160v PV Input, fit for Sealed, Gel, Flooded, and Lithium Batteries
Asin: B0CBBKWZXG | Ean: 0768420064520 | UPC: 768420064520
🌲【Wide Range Solar Voltage/Power Support】Controller Support High Pv Input Power/Voltage. Controller Can Accept Solar Voltage Up To 160V. When Battery Is 12V System: Suggest Solar Power 720W, Suggest Range:Dc18v~Dc72v ; 1440W Dc36v~108V When 24V ; 2100W Dc54v~144V When 36V ; 2800W Dc72v~160Vwhen 48V..
🌲【Notiction】If You Use Sealed Lead Acid, Vented Gel Battery, And Etc, You Donn't Need To Set Any Parameters, The Controller Can Adjuste Automaticly And Work Normally; But If You Use Lithium Batteries, You Need To Properly Adjuste Parameters According To The Actual Voltage Of The Battery, Becauese The Voltage Of Lithium Batteries Is Unstable, Such As Acid Battery 12V Is 12V, Lithium Battery 12V May Be 11.1V Or 14.8V..
🌲【Protection】 Electronic Protection: Overcharging, Over-Discharging, Overload, And Short Circuit. Reverse Protection: Any Combination Of Solar Module And Battery, Without Causing Damage To Any Component..
🌲【12V/24V/36V/48V】 Mppt 60A Solar Charge Controller , Automatically Detects 12V, 24V, 36V Or 48V Dc System Voltages. Innovative Mppt Technology With High Tracking Efficiency Up To 99% And Peak Conversion Efficiency Of 98%..
Features
- BATTERY Compatible with various deep cycle battery options: Sealed, Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery (lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according your need copper wires:6AWG-12AWG
- 12V/24V/36V/48V MPPT 60A solar charge controller , Automatically detects 12V, 24V, 36V or 48V DC system voltages. Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%.
- WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT Controller support High PV Input Power/voltage. Controller can accept Solar voltage up to 160V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC18V~DC72V ; 1440W DC36V~108V when 24V ; 2100W DC54V~144V when 36V ; 2800W DC72V~160Vwhen 48V.
- Protection Electronic protection: Overcharging, over-discharging, overload, and short circuit. Reverse protection: Any combination of solar module and battery, without causing damage to any component.
- Notiction If you use sealed lead acid, vented gel battery, and etc, you donn't need to set any parameters, the controller can adjuste automaticly and work normally; but if you use lithium batteries, you need to properly adjuste parameters according to the actual voltage of the battery, becauese the voltage of lithium batteries is unstable, such as acid battery 12V is 12V, lithium battery 12V may be 11.1V or 14.8V.
- See more on Amazon...
Brand: LAPVOC.MIX | Manufacturer: LAPVOC.MIX
See On Amazon #16
PowMr 4500W Solar Inverter 24V DC to 220-230V AC, Pure Sine Wave Hybrid Inverter with 150A MPPT Solar Charge Controller, for 24V LiFePO4/Li/GEL/AGM Battery(24VDC to 220VAC)
Asin: B0CGMHTC35
【Unique Design&Touch Button】Unique Glass Panel Design, 6.25-Inch Lcd Display Together With The Backlight Display Function, Shows The Status And Data More Clearly; Touchable Buttons Instead Of Push Buttons, Greatly Enhancing The User Experience Of The Operation Interface..
【Compatible 24V Batteries】Compatible With Various 24V Batteries Such As Agm, Gel, Lead-Acid, Lithium-Ion And Lifepo4 Batteries. Built-In Lithium Activation Along With Comprehensive Battery Protection Features Including Short Circuit Protection, Over/Under Voltage Protection Effectively Protects Battery Life..
【Charging & Output Modes】Solar Inverter Support 4 Charging Modes(Choose Solar Power/Utility Power/Ac Power To Charge Battery) And 3 Output Modes(Choose Sola/Utility/Battery Which Source To Power Your Load At First Priority)..
【Technical Specifications】Rated Output Power: 4500Va, Maximum Pv Open Circuit Voltage: 450Vdc, Pv Array Mppt Voltage Range: 55-450Vdc, Dc Input Voltage: 24Vdc, Nominal Output Voltage: 230Vac±5%, Output Frequency: 50Hz/60Hz, Built-In Rs232 And Rs485 Communication Ports..
Features
- 4.5KW Solar Hybrid Inverter This 4500W pure sine wave inverter is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. With 150A MPPT solar charge controller, using the latest optimized MPPT technology, efficiency up to 98%.
- Technical Specifications Rated Output Power: 4500VA, Maximum PV open circuit voltage: 450Vdc, PV Array MPPT voltage range: 55-450Vdc, DC Input Voltage: 24Vdc, Nominal Output Voltage: 230Vac 5%, Output Frequency: 50Hz/60Hz, Built-in RS232 and RS485 communication ports.
- Unique Design&Touch Button Unique glass panel design, 6.25-inch LCD display together with the backlight display function, shows the status and data more clearly; Touchable buttons instead of push buttons, greatly enhancing the user experience of the operation interface.
- Charging & Output Modes Solar Inverter support 4 charging modes(Choose solar power/Utility power/AC power to charge battery) and 3 output modes(choose Sola/Utility/Battery which source to power your load at first priority).
- Compatible 24V batteries Compatible with various 24V batteries such as AGM, Gel, Lead-acid, Lithium-ion and LiFePO4 batteries. Built-in lithium activation along with comprehensive battery protection features including short circuit protection, over/under voltage protection effectively protects battery life.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Warranty: 1 year
See On Amazon #17
Solar Inverter 5000W 48V Off Grid Inverter 120VAC Pure Sine Wave Inverter Charger 48v Solar Inverter with MPPT Charger 5000W Inverter for Home, RV, Truck, Off-Grid,Lead-Acid/Lithium
Asin: B0C5RBNBHM
48V Off Grid Inverter With Advanced Mppt Technology Charging With An Efficiency Of 99.9% And Inverter With Dc To Ac Advanced Spwm Technology Which Output Pure Sine Wave Power..
5000W 48V Inverter Lcd Screen And 3 Led Indicators For Dynamic Display Of System Data And Operating Status, Intelligent Variable Speed Fan To Efficiently Dissipate Heat And Extend System Life..
Mppt Charge Inverter, 4 Charging Modes And 3 Output Load Working Mode Support, Upport: Only Solar, Mains Priority, Solar Priority And Mains & Solar Hybrid Charging..
48Vdc To 110Vac/120Vac Solar Inverter Charger, Requires 48V Lead-Acid Or Lithium Batteries, Only Work With 48Vdc Battery System,Battery Charging Voltage Range:40-60Vdc..
Features
- Solar Inverter 5000W Pure Sine Wave Inverter 80amp Mppt Controller Inverter, off GRID Solar inverter Work with 48V Lead-Acid and Lithium battery, accept max 5500W 22A 500V solar power and AC input 90-140Vac.
- 48VDC to 110VAC/120VAC Solar Inverter Charger, Requires 48V lead-acid or lithium batteries, Only work with 48Vdc battery system,Battery Charging Voltage Range:40-60Vdc.
- 48V off grid Inverter with Advanced MPPT technology Charging with an efficiency of 99.9% and inverter with DC to AC advanced SPWM technology which output pure sine wave power.
- MPPT charge Inverter, 4 charging modes and 3 output load working mode support, upport: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
- 5000w 48V inverter LCD screen and 3 LED indicators for dynamic display of system data and operating status, Intelligent variable speed fan to efficiently dissipate heat and extend system life.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Warranty: 2 year
See On Amazon #18
10000W Split Phase 48V DC to 100V AC~240V AC Solar Inverter,UL1741 10KW Pure Sine Wave Hybrid Inverter with 200Amp MPPT Charge Controller, Work with 48V Lead Acid and Lithium Battery
Asin: B0CT7RMZLK
【Single/Split-Phase Mode】: In Split-Phase Mode: Output Voltage Range (L-N): 100～120Vac, 120Vac Default, Output Voltage Range (L-L): 200～240Vac, 240Vac Default. In Single Phase Mode: Output Voltage Range (L-N): 100～120Vac, 120Vac Default..
【14 Smart Protection Functions】: Multiple Intelligent Protections, Such As Pv Input Current/Power Limiting Protection, Pv Input Over-Voltage, Pv Night Reverse Current Protection, Ac Input Over-Voltage Protection, Ac Input Under-Voltage Protection, Etc..
【Charging/Ac Output Mode】: 4 Ac Output Modes: Utility Priority Output, Solar And Utility Hybrid Output, Solar Priority Output, Inverter Priority Output. 4 Battery Charging Modes: Hybrid Charging, Utility Priority Charging, Solar Priority Charging, Only Solar Charging..
【Dual Mppt/Battery Type】: Dual Mppt With 99.9% Efficiency And Maximum 22A Current In A Single Circuit, Perfectly Adapted To High Power Modules.Compatible With Various Batteries Such As Agm, Gel, Lead-Acid, Lithium-Ion And Lifepo4 Batteries, And Supports Battery-Free. With A Dual Activation Function When The Li-Ion Battery Is Dormant; Either Mains/Photovoltaic Power Supply Access Can Trigger The Activation Of The Li-Ion Battery..
【Time-Slot Charging/Discharging Function】:The Pow-Sunsmart Series Is Equipped With A Time-Slot Charging And Discharging Function, Which Allows Users To Set Different Charging And Discharging Periods According To The Local Peak And Valley Tariffs, So That The Utility Power And Pv Energy Can Be Used Rationally..
【Technical Specifications】: Max.Pv Array Power:11000W, Max.Mppt Charging Current:200A, Rated Output Power:10000W, Max.Peak Power:20,000W, Rated Output Voltage:120/240Vac（Split Phase/Single Phase） , Max.Voltage Of Open Circuit:500Vdc.Embedded Interfaces:Rs485 / Can / Usb / Dry Contact..
Features
- 10KW Solar Inverter This is a solar inverter with both single-phase and split-phase functions. Is a new type of solar energy storage inverter control inverter integrating solar energy storage & utility charging and energy storage, AC sine wave output. It adopts DSP control and features high response speed,reliability, and industrial standard through an advanced control algorithm.
- Technical Specifications : Max.PV array power:11000W, Max.MPPT Charging Current:200A, Rated Output Power:10000W, Max.Peak Power:20,000W, Rated Output Voltage:120/240Vac split phase/single phase , Max.Voltage of Open Circuit:500Vdc.Embedded Interfaces:RS485 / CAN / USB / Dry contact.
- Single/Split-phase mode : In split-phase mode: Output Voltage Range (L-N): 100 120Vac, 120Vac default, Output Voltage Range (L-L): 200 240Vac, 240Vac default. In single phase mode: Output Voltage Range (L-N): 100 120Vac, 120Vac default.
- Time-slot charging/Discharging function :The POW-SunSmart series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally.
- Charging/AC output mode : 4 AC output modes: Utility Priority Output, Solar and Utility Hybrid Output, Solar Priority Output, Inverter Priority Output. 4 battery charging modes: Hybrid Charging, Utility Priority Charging, Solar Priority Charging, Only Solar Charging.
- Dual MPPT/Battery Type : Dual MPPT with 99.9% efficiency and maximum 22A current in a single circuit, perfectly adapted to high power modules.Compatible with various batteries such as AGM, Gel, Lead-acid, Lithium-ion and LiFePO4 batteries, and supports battery-free. With a dual activation function when the li-ion battery is dormant; either mains/photovoltaic power supply access can trigger the activation of the li-ion battery.
- 14 Smart Protection Functions : Multiple intelligent protections, such as PV input current/power limiting protection, PV input over-voltage, PV night reverse current protection, AC input over-voltage protection, AC input under-voltage protection, etc.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Warranty: 2 year
See On Amazon #19
PowMr 5000W Solar Inverter 48V DC to 110V/240V AC Split Phase Inverter Pure Sine Wave Power Inverter with 100A MPPT Controller 5000W Hybrid Inverter, Max.PV Input 5500W, 500VDC, Parallel 6 inverters
Asin: B0BX67RKMW
【Intelligent Power Saving】Power Saving Mode Available To Reduce No-Load Loss, When The Eco Mode Is Enabled, If The Load Is Below 50W, The Inverter Output Is Delayed For 5 Mins And Then The Output Is Turned Off. When The Hull Switch Is Pressed To The ""Off"" State, And Then Pressed To The ""On"" State, The Inverter Will Resume The Output..
【Multiple Protection】Dual Cooling Fan Design,Efficiently Dissipate Heat;Durable Finish With High Anti-Corrosion,Dust-Proof Design Prevent Dust From Coming Inside The Inverter, Prolong Lifespan Of The Inverter; Designed With A Lcd Screen And 3 Led Indicators For Dynamic Display Of System Data And Operating Status, And Complete Protections, Including Short Circuit Protection, Over Voltage And Under Voltage Protection, Overload Protection, Reverse Protection, Etc..
【4 Charge/ 2 Discharge Modes】Support 4 Charging Modes: Only Solar, Mains Priority, Solar Priority And Mains & Solar Hybrid Charging; Mains Bypass And Inverter Output Two Output Mode, Uninterrupted Power Supply; Anti-Backflow Grid Connection Function, Support For Use Without Battery, Can Be Set Up For On-Grid Power Generation..
【Peak-Valley Electricity Tariff】Through Sectional Charging/Discharge Function, Users Can Freely Set The Battery Discharge Time Or Mains Carging Time Within The Rangeof 00:00 To 23:59(3 Definable Periods) According To Your Local Electricity Tariff Standards; Bt1st Mode--Sectional Charging Function(Mains Charge); Ac1st Mode--Sectional Discharge Function(Battery Discharge)..
Features
- Pure Sine Wave All-in-One Inverter 5000W DC 48V hybrid solar inverter, single-phase,split Phase and three-phase 120/208V/240Vac Output pure sine wave inverter( JUST ONLY TWO INVERTERS ARE NEEDED TO OUTPUT 240V/208V IN SPLIT PHASE, UP TO 10000W ), Built-in 100A MPPT solar charge controller,Max.PV Power 5500W, Max.PV Input VOC: 500V DC, Max PV Charging Current: 100A , support 48V Lead acid or lithium battery or batteryless mode; support Parallel up to 6 inverters.
- Peak-Valley Electricity Tariff Through sectional charging/discharge function, users can freely set the battery discharge time or mains carging time within the rangeof 00:00 to 23:59(3 definable periods) according to your local electricity tariff standards; BT1ST Mode--Sectional Charging Function(Mains Charge); AC1ST Mode--Sectional Discharge Function(Battery Discharge).
- Intelligent Power Saving Power saving mode available to reduce no-load loss, when the ECO mode is enabled, if the load is below 50W, the inverter output is delayed for 5 mins and then the output is turned off. When the hull switch is pressed to the OFF State, and then pressed to the ON State, the inverter will resume the output.
- 4 Charge/ 2 Discharge Modes Support 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; mains bypass and inverter output two output mode, uninterrupted power supply; Anti-backflow grid connection function, support for use without battery, can be set up for on-grid power generation.
- Multiple Protection Dual Cooling fan design,efficiently dissipate heat;Durable finish with high anti-corrosion,dust-proof design prevent dust from coming inside the inverter, prolong lifespan of the inverter; Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status, and complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
- See more on Amazon...
Brand: PowMr | Manufacturer: PowMr
Dimensions: 8.00 x 21.00 x 18.00 Inches
See On Amazon
Looking For Something Else?
Search