uxcell 2-inch(50mm) Diamond Coated Glass Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain Bottles Pots Brick
Asin: B071HNHVS4 | Model: a16121200ux1027 | PartNumber: a16121200ux1027 | Ean: 0601382490016 | UPC: 601382490016
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Nickel Plated Surface - Nickel Plating Surface Can Extend The Service Life And Enhance The Surface Corrosion Resistance. Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit More Sharp.Electroplated Diamond Is Uniform And More Wear-Resistant..
Features
- SIZE - 50mm(2-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
- SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
- APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 2inch50mm Diamond Coated Glass
#1
PHITUODA 2 Inch / 50mm Diamond Drill Bits, Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz
Asin: B08CX7G4BD | Model: TUOR1351 | PartNumber: TUOR1351
*Smoothly Cutting: A Thicken Diamond Dust Coating On The Tops Offers Superior Cutting Strength For Creates A High Precision, Smooth Cut With No Broken Edges. Reduced Drill Speeds, Low Drill Pressure, And Increased Use Of Water Lubrication Will Extend Drill Bit Life Considerably..
*Hassle-Free Guarantee: Phituoda's Products Can Only Be Packed And Shipped After Strict Quality Inspection. If You Are Not Satisfied Within 90-Days, Send 1 Simple Email And Receive A 100% Money-Back Refund. We're So Confident You Will Love Our Products Like Our Other 5-Star Reviewers! You Will Be Amazed At The Customer Service You Receive After The Sale!.
*Multiple Applications: The Diamond Drill Bit Can Remove A Complete 50Mm Diameter Hole On Glass, Tiles, Granite, Ceramic. In Addition To Cutting Holes For Glass, The Hole Saw Comes In Handy For Tile Bottles, Blocks Jars, Fiberglass, Porcelain Tile, Ceramic, Slate, Marble, Light Stone. Not For Use On Concrete Or For Depths Beyond About 1/2"..
*Quality Selection: These Diamond Drill Bits Are Made Of High-Speed Steel Which Is High Quality And Durable. With A Nickel-Plated Coated Body To Resist Corrosion, Which Has A Long Service Life. Large Chip Holes To Ensure That When The Punching Smooth, Punching Accurate..
Features
- *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 2" / 50mm, Shank Diameter is 25/64" / 10mm, Total Length is 2.18" / 55.3mm.
- *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate.
- *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably.
- *Multiple Applications: The diamond drill bit can remove a complete 50mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2.
- *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale!
- See more on Amazon...
Brand: PHITUODA | Manufacturer: PHITUODA
See On Amazon #2
uxcell 50mm Diamond Drill Bits Hole Saws for Glass Tile Porcelain Marble Ceramic Bottles Pots Brick Pack of 2
Asin: B07MKMX631 | Model: B07MKMX631 | PartNumber: B07MKMX631
Large Clearance Hole: The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. The Cutting Is Flat And Smooth Without Scratches..
Tips: Use At Low Drilling Speeds And Drilling Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Concrete Or Depth Beyond About 1/2 Inch. The Hole Should Be Entered Smoothly, And No Side Pressure Is Applied..
Features: Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws. Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion..
Wide Applications: Suitable For Cutting Accurate Holes On Glass, Ceramic, Tile, Porcelain, Marble, Stone Bottles And Pots. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Features
- Diamond Drill Bits: Electroplated diamond is uniform and more wear-resistant. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- Wide Applications: Suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. Not suitable for drilling tempered glass, plastic and wood.
- Large Clearance Hole: The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. The cutting is flat and smooth without scratches.
- Features: Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Nickel plating on these bits maximizes your tools life with great resistance to corrosion.
- Tips: Use at low drilling speeds and drilling pressure. Always work with coolant (water) when drilling. Not suited for concrete or depth beyond about 1/2 inch. The hole should be entered smoothly, and no side pressure is applied.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 2.36 x 4.72 x 2.36 Inches
See On Amazon #3
uxcell 10pcs 50mm 2" Diamond Coated Rotary Cutting Cut Off Wheels Disc
Asin: B00SL0QKJG | Model: a14120200ux0352 | PartNumber: a14120200ux0352
Inner Diameter : 3Mm/0.12";Thickness : 0.6Mm/0.02".
Weight : 75G;Package Content : 10 X Diamond Cutting Disc2 X Mandrel Shank.
Shank Diameter : 3Mm/1/8";Mandrel Size : 36X 5Mm/1.4" X 0.2"(L*W).
Color : Silver Tone;Outer Diameter : 50Mm/2".
Features
- Product Name : DiamondCuttingDisc;Material : Metal, Diamond Particles
- Color : Silver Tone;Outer Diameter : 50mm/2
- Inner Diameter : 3mm/0.12;Thickness : 0.6mm/0.02
- Shank Diameter : 3mm/1/8;Mandrel Size : 36x 5mm/1.4 x 0.2(L*W)
- Weight : 75g;Package Content : 10 x Diamond Cutting Disc2 x Mandrel Shank
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #4
JINGLING 2 inch Diamond Hole Saw 50mm Ceramic Tile Drill Bits for Glass Stone Porcelain with Center Pilot Bit
Asin: B0CX1C5H6R
2 Inch Hole Saw With Center Guiding Drill Bit Make You More Easy To Locate The Center To Start Drilling On A Smooth Tile Surface.
Outer Diameter: 50Mm(Close To 2"); Inner Diameter: 46.2Mm(1.82"); Drill Depth: 35Mm(1.38"); Total Length: 70Mm(2.75").
Hex Shank Diameter:10Mm (3/8") Will Fit Cordless Screwdrivers, Hand Electric Drill With Standard Drill Chuck.
Excellent For Making Clean And Accurate Hole On Glass, Stone, Granite, Marble, Tile.
Features
- Tile hole saw is made of carbon steel and high quality diamond powder, make glass hole saw particularly sturdy, sharp, and durable
- Excellent for making clean and accurate hole on glass, stone, granite, marble, tile
- 2 inch hole saw with center guiding drill bit make you more easy to locate the center to start drilling on a smooth tile surface
- Hex Shank Diameter:10mm (3/8) will fit cordless screwdrivers, hand electric drill with standard drill chuck
- Outer Diameter: 50mm(close to 2); Inner Diameter: 46.2mm(1.82); Drill Depth: 35mm(1.38); Total Length: 70mm(2.75)
- See more on Amazon...
Brand: JINGLING | Manufacturer: JINGLING
See On Amazon #5
uxcell 40mm, 50mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain 2pcs
Asin: B0BMX71LC8 | Model: f22062300ux1959 | PartNumber: f22062300ux1959
Nickel Plated Surface - The Nickel Plating Surface Can Extend The Service Life And Enhance Surface Corrosion Resistance..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - Side Open Can Remove The Waste To Keep The Drill Bit Clean..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit Sharper..
Features
- Size - 40mm Drilling Diameter, 10mm Shank(1pcs); 50mm Drilling Diameter, 10mm Shank(1pcs)
- Diamond Coated - Diamond coating enhances the drilling speed, which makes the bit sharper.
- Nickel Plated Surface - The nickel plating surface can extend the service life and enhance surface corrosion resistance.
- Special Design - Side open can remove the waste to keep the drill bit clean.
- Applications - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
Utoolmart 2pcs 50mm/1.95 inch Diamond Drill Bit Hole Saw for Tile Glass Marble Granite Fiberglass Ceramic Tool Sliver
Asin: B07WQ2ZQ19
【Nickel Plated】- Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion.Well Made, Sharp, Hard, Lasting..
【Warm Reminder】- Please Use At Low Drill Speeds And Drill Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Use On Concrete Or For Depths Beyond About 1/2 Inch..
【Application】- Cutting Accurate Holes On Glass, Ceramics, Porcelain, Porcelain Tile Etc.. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
【Quality Material】- Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws.Side Holes Allow For Easy Slug Removal After Drilling..
Features
- Dimension - Drilling Diameter: 50mm/1.95"; Drilling Depth: 25mm/0.98"; Total Length: 50mm/1.96".
- Quality Material - Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.Side holes allow for easy slug removal after drilling.
- Nickel Plated - Nickel plating on these bits maximizes your tools life with great resistance to corrosion.Well made, sharp, hard, lasting.
- Application - Cutting accurate holes on glass, ceramics, porcelain, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood.
- Warm Reminder - Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch.
- See more on Amazon...
Brand: Utoolmart | Manufacturer: Utoolmart
See On Amazon #7
Utoolmart 2pcs 50mm/1.95 inch Diamond Drill Bit Hole Saw for Tile Glass Marble Granite Fiberglass Ceramic Tool Sliver
Asin: B07WGZ8HPV
【Nickel Plated】- Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion.Well Made, Sharp, Hard, Lasting..
【Warm Reminder】- Please Use At Low Drill Speeds And Drill Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Use On Concrete Or For Depths Beyond About 1/2 Inch..
【Application】- Cutting Accurate Holes On Glass, Ceramics, Porcelain, Porcelain Tile Etc.. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
【Quality Material】- Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws.Side Holes Allow For Easy Slug Removal After Drilling..
Features
- Dimension - Drilling Diameter: 50mm/1.95"; Drilling Depth: 25mm/0.98"; Total Length: 50mm/1.96".
- Quality Material - Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.Side holes allow for easy slug removal after drilling.
- Nickel Plated - Nickel plating on these bits maximizes your tools life with great resistance to corrosion.Well made, sharp, hard, lasting.
- Application - Cutting accurate holes on glass, ceramics, porcelain, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood.
- Warm Reminder - Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch.
- See more on Amazon...
Brand: Utoolmart | Manufacturer: Utoolmart
See On Amazon #8
uxcell 50mm Diamond Drill Bits Hole Saws for Glass Tile Porcelain Marble Ceramic Bottles Pots Brick
Asin: B07M63S8VH | Model: a18112200ux0272 | PartNumber: a18112200ux0272
Large Clearance Hole: The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. The Cutting Is Flat And Smooth Without Scratches..
Tips: Use At Low Drilling Speeds And Drilling Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Concrete Or Depth Beyond About 1/2 Inch. The Hole Should Be Entered Smoothly, And No Side Pressure Is Applied..
Features: Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws. Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion..
Wide Applications: Suitable For Cutting Accurate Holes On Glass, Ceramic, Tile, Porcelain, Marble, Stone Bottles And Pots. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Features
- Diamond Drill Bits: Electroplated diamond is uniform and more wear-resistant. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- Wide Applications: Suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. Not suitable for drilling tempered glass, plastic and wood.
- Large Clearance Hole: The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. The cutting is flat and smooth without scratches.
- Features: Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Nickel plating on these bits maximizes your tools life with great resistance to corrosion.
- Tips: Use at low drilling speeds and drilling pressure. Always work with coolant (water) when drilling. Not suited for concrete or depth beyond about 1/2 inch. The hole should be entered smoothly, and no side pressure is applied.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 2.36 x 2.36 x 2.36 Inches
See On Amazon #9
uxcell 50mm Diamond Drill Bit Hole Saw for Glass Tile Marble Fiberglass Ceramic Stone Bottles Pots
Asin: B07FYD698V | Model: a18060600ux0222 | PartNumber: a18060600ux0222
Large Clearance Hole: The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. The Cutting Is Flat And Smooth Without Scratches..
Tips: Use At Low Drilling Speeds And Drilling Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Concrete Or Depth Beyond About 1/2 Inch. The Hole Should Be Entered Smoothly, And No Side Pressure Is Applied..
Features: Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws. Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion..
Wide Applications: Suitable For Cutting Accurate Holes On Glass, Ceramic, Tile, Porcelain, Marble, Stone Bottles And Pots. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Features
- 50mm Diamond Drill Bits: 2.5mm x 4mm (thickness x height) electroplated diamond is uniform and more wear-resistant. The hole saw achieves high precision and smooth cuts without edge breakage. Made of high-quality alloy steel, with good toughness and high strength.
- Wide Applications: Suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. Not suitable for drilling tempered glass, plastic and wood.
- Large Clearance Hole: The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. The cutting is flat and smooth without scratches.
- Features: Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Nickel plating on these bits maximizes your tools life with great resistance to corrosion.
- Tips: Use at low drilling speeds and drilling pressure. Always work with coolant (water) when drilling. Not suited for concrete or depth beyond about 1/2 inch. The hole should be entered smoothly, and no side pressure is applied.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 35mm Dia Diamond Coated Marble Glass Hole Saw Cutter 51mm Long
Asin: B00DGWU8V0 | Model: a13042600ux0295 | PartNumber: a13042600ux0295 | Ean: 0700955372725, 0641871149308 | UPC: 641871149308, 700955372725
Total Length : 51Mm / 2";Color : Silver Tone.
Package Content : 1 X Glass Hole Saw.
Weight : 30G.
Cutting Hole Diameter : 35Mm / 1.38";Shank Diameter : 8Mm / 0.31".
Features
- Product Name : Glass Hole Saw;Main Material : Metal
- Cutting Hole Diameter : 35mm / 1.38;Shank Diameter : 8mm / 0.31
- Total Length : 51mm / 2;Color : Silver Tone
- Weight : 30g
- Package Content : 1 x Glass Hole Saw
- See more on Amazon...
Brand: uxcell | Manufacturer: Sourcingmap
Dimensions: 1.38 x 2.01 x 1.38 Inches | Weight: 0.07 pounds
See On Amazon
Looking For Something Else?
Search