InLine Fabrication 9-3/4" Ultramount Riser Mount for The Hornady Iron Single Stage Lock-N-Load Press
Asin: B071KLPHQH | Model: for Hornady IRON Single Stage LNL press | PartNumber: for Hornady IRON Single Stage LNL press
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Accessible Lower Storage Tray And Hardware For Your Press Included.
Made In The Usa.
Durable Black Powder Coated Finish.
Lifts Your Press Up 9-3/4" Above The Work Surface And Gets The Shellplate Closer To Eye Level.
Features
- Constructed from 3/16" steel the Ultramount is super solid
- Lifts your press up 9-3/4 above the work surface and gets the shellplate closer to eye level
- Accessible lower storage tray and hardware for your press included
- Durable black powder coated finish
- Made in the USA
- See more on Amazon...
Brand: InLine Fabrication | Manufacturer: InLine Fabrication
Dimensions: 9.75 x 11.50 x 12.00 inches | Weight: 1.00 pounds
Warranty: All InLine Fabrication products feature a lifetime "No worries" warranty
See On Amazon Similar To InLine Fabrication 93 4 Ultramount
#1
InLine Fabrication Spacer for Flush Mount for Ultramount Quick Change Press Mounting System
Asin: B0C87DP8NS
Let’S Say You Alternate Between Using A Dillon 750 For Bulk 5.56 Reloads And A Forster Co-Ax For Precision Rifle Hunting Loads. A Single Qc Dock Would Provide Storage For The Press Not Currently In Use. Then When The Need Changes. 30 Seconds To Unsecure The Current Press From The Quick Change Base. 30 Seconds To Bring Down And Secure The Other Press In The Quick Change Base And 30 Seconds To Secure The Unneeded Press Into The Single Qc Dock..
The Point Of A Quick Change Mount Is Quick Changes. In Order For That To Happen You Need A Place To Store Your Other Press Or Reloading Tool. The Single Qc Dock Provides A Method Of Storing One Such Tool Mounted To The Wall In A Secure Fashion. The Double Qc Dock Provides A Method For Storing Two Presses Or Other Tools..
You May Have A Broader Array Of Options. The Dillion 750 For 5.56, The Hornady Lock N Load Ap For Bulk 9Mm, The Forster Co-Ax For Precision Rifle Hunting And A Hornady Prep Station For Brass Resizing. The Qc Base Mount Would Hold The Current Use Item (Hornady Prep Center), The Double Qc Could Hold The Forster Co-Ax And The Square Deal B And The Single Could Hold The Dillon 750. In Under A Minute Or Two, Changing Out And Being Back Production Is Completely Possible With The Qc Docks..
Mounting Of Either The Single Qc Dock Or Double Qc Dock Must Be Done With Screws, Bolts, Wall Fasteners Appropriate To Hold The Weight Of The Press That Will Be Attached. The Docks Are Strong Enough To Easily Hold A Dillon 1050 With All The Accessories. Your Job Is To Securely Mount The Dock To The Wall. No Matter What The Drywall Anchors Say They Are Rated For, They Are Not A Good Choice..
Features
- The Flush Mount Spacer is to be used with the Flush Mount when routing the table is not desired. The Flush Mount is designed for you to recess the mount into the table for a completely flush table top after installation. If that is not desired or possible, the spacer allows there to be room for the top plate tongue to engage and hold the press in place.
- Mounting of either the Single QC Dock or Double QC Dock must be done with screws, bolts, wall fasteners appropriate to hold the weight of the press that will be attached. The Docks are strong enough to easily hold a Dillon 1050 with all the accessories. Your job is to securely mount the Dock to the wall. No matter what the drywall anchors say they are rated for, they are not a good choice.
- Let s say you alternate between using a Dillon 750 for bulk 5.56 reloads and a Forster Co-Ax for precision rifle hunting loads. A single QC Dock would provide storage for the press not currently in use. Then when the need changes. 30 seconds to unsecure the current press from the quick change base. 30 seconds to bring down and secure the other press in the quick change base and 30 seconds to secure the unneeded press into the single QC Dock.
- You may have a broader array of options. The Dillion 750 for 5.56, the Hornady Lock n Load AP for bulk 9mm, the Forster Co-Ax for precision rifle hunting and a Hornady prep station for brass resizing. The QC base mount would hold the current use item (Hornady Prep center), the double QC could hold the Forster Co-Ax and the Square Deal B and the single could hold the Dillon 750. In under a minute or two, changing out and being back production is completely possible with the QC docks.
- The point of a quick change mount is QUICK CHANGES. In order for that to happen you need a place to store your other press or reloading tool. The single QC Dock provides a method of storing one such tool mounted to the wall in a secure fashion. The double QC Dock provides a method for storing two presses or other tools.
- See more on Amazon...
Brand: InLine Fabrication | Manufacturer: InLine Fabrication
See On Amazon #2
InLine Fabrication Ultramount Riser System for The Redding T-7 Turret Press - Tall 9-3/4"
Asin: B00PZR3XX4 | Model: for Redding T-7 Turret press | PartNumber: for Redding T-7 Turret press
[Solid Steel] Constructed From Solid 3/16" Plate Steel, The Ultramount Is Super Solid. Will Not Bend Or Flex While Reloading And Spreads The Pressure Load Out To A Much Larger Footprint On Your Reloading Table Or Bench.
[Durability] Durable Black Powder Coated Finish. *** Note: 4 Pieces Of 1/4” Diameter Mounting Bolts Of Whenever Length/Style Are Needed To Secure To Your Bench Or Table. These Are Not Included As The Thickness/Constructions Of Everyone's Bench Is Different. Through Bolting With Washers On The Underside Is Strongly Recommended. Made In The Usa.
[Accessibility] Accessible Lower Storage Tray And Hardware For Your Press Included. Note, When Using The 4” And 7 1/2” Ultramount, With Some Presses, The Press Ram May Have To Hang Over The Bench Edge And Interfere With Opening Of Drawers. Plan Accordingly.
[9-3/4” Lift Up] Lifts Your Press Up 9-3/4" Above The Work Surface And Gets The Shellplate Closer To Eye Level. 12-1/8” Wide, 11-1/2” Deep Footprint And 9-3/4” Tall.
Features
- [DEDICATED PRESS MOUNT] This mount is for The Redding T-7 Turret Press and will ONLY work with that specific press. We have dozens of dedicated mounts that are purpose built for specific presses. Please find the one for your specific press.
- [9-3/4 Lift Up] Lifts your press up 9-3/4 above the work surface and gets the shellplate closer to eye level. 12-1/8 wide, 11-1/2 deep footprint and 9-3/4 tall
- [SOLID STEEL] Constructed from solid 3/16 plate steel, the Ultramount is super solid. Will not bend or flex while reloading and spreads the pressure load out to a much larger footprint on your reloading table or bench
- [Accessibility] Accessible lower storage tray and hardware for your press included. Note, when using the 4 and 7 1/2 Ultramount, with some presses, the press ram may have to hang over the bench edge and interfere with opening of drawers. Plan accordingly
- [Durability] Durable black powder coated finish. *** Note: 4 pieces of 1/4 diameter mounting bolts of whenever length/style are needed to secure to your bench or table. These are not included as the thickness/constructions of everyone's bench is different. Through bolting with washers on the underside is strongly recommended. Made in the USA
- See more on Amazon...
Brand: InLine Fabrication | Manufacturer: InLine Fabrication
Dimensions: 9.63 x 11.50 x 12.00 inches | Weight: 10.10 pounds
See On Amazon #3
Inline Fabrication 9-3/4" Ultramount Riser System for The Redding Big Boss II
Asin: B00PZR1CNC | Model: REU2 | PartNumber: REU2
[Solid Steel] Constructed From Solid 3/16" Plate Steel, The Ultramount Is Super Solid. Will Not Bend Or Flex While Reloading And Spreads The Pressure Load Out To A Much Larger Footprint On Your Reloading Table Or Bench.
[Durability] Durable Black Powder Coated Finish. *** Note: 4 Pieces Of 1/4” Diameter Mounting Bolts Of Whenever Length/Style Are Needed To Secure To Your Bench Or Table. These Are Not Included As The Thickness/Constructions Of Everyone's Bench Is Different. Through Bolting With Washers On The Underside Is Strongly Recommended. Made In The Usa.
[Accessibility] Accessible Lower Storage Tray And Hardware For Your Press Included. Note, When Using The 4” And 7 1/2” Ultramount, With Some Presses, The Press Ram May Have To Hang Over The Bench Edge And Interfere With Opening Of Drawers. Plan Accordingly.
[9-3/4” Lift Up] Lifts Your Press Up 9-3/4" Above The Work Surface And Gets The Shellplate Closer To Eye Level. 12-1/8” Wide, 11-1/2” Deep Footprint And 9-3/4” Tall.
Features
- [DEDICATED PRESS MOUNT] This mount is for the Redding Big Boss II press and will ONLY work with that specific press. We have dozens of dedicated mounts that are purpose built for specific presses. Please find the one for your specific press.
- [9-3/4 Lift Up] Lifts your press up 9-3/4 above the work surface and gets the shellplate closer to eye level. 12-1/8 wide, 11-1/2 deep footprint and 9-3/4 tall
- [SOLID STEEL] Constructed from solid 3/16 plate steel, the Ultramount is super solid. Will not bend or flex while reloading and spreads the pressure load out to a much larger footprint on your reloading table or bench
- [Accessibility] Accessible lower storage tray and hardware for your press included. Note, when using the 4 and 7 1/2 Ultramount, with some presses, the press ram may have to hang over the bench edge and interfere with opening of drawers. Plan accordingly
- [Durability] Durable black powder coated finish. *** Note: 4 pieces of 1/4 diameter mounting bolts of whenever length/style are needed to secure to your bench or table. These are not included as the thickness/constructions of everyone's bench is different. Through bolting with washers on the underside is strongly recommended. Made in the USA
- See more on Amazon...
Brand: InLine Fabrication | Manufacturer: InLine Fabrication
Dimensions: 9.63 x 11.50 x 12.00 inches | Weight: 10.10 pounds
See On Amazon #4
Inline Fabrication Ultramount Riser System for The Dillon Square Deal B Press - Tall 9-3/4"
Asin: B00YFPWTJQ | Model: DNU3 | PartNumber: DNU3
[Solid Steel] Constructed From Solid 3/16" Plate Steel, The Ultramount Is Super Solid. Will Not Bend Or Flex While Reloading And Spreads The Pressure Load Out To A Much Larger Footprint On Your Reloading Table Or Bench.
[Durability] Durable Black Powder Coated Finish. *** Note: 4 Pieces Of 1/4” Diameter Mounting Bolts Of Whenever Length/Style Are Needed To Secure To Your Bench Or Table. These Are Not Included As The Thickness/Constructions Of Everyone's Bench Is Different. Through Bolting With Washers On The Underside Is Strongly Recommended. Made In The Usa.
[Accessibility] Accessible Lower Storage Tray And Hardware For Your Press Included. Note, When Using The 4” And 7 1/2” Ultramount, With Some Presses, The Press Ram May Have To Hang Over The Bench Edge And Interfere With Opening Of Drawers. Plan Accordingly.
[9-3/4” Lift Up] Lifts Your Press Up 9-3/4" Above The Work Surface And Gets The Shellplate Closer To Eye Level. 12-1/8” Wide, 11-1/2” Deep Footprint And 9-3/4” Tall.
Features
- [DEDICATED PRESS MOUNT] This mount is for the Dillon Square Deal B Press and will ONLY work with that specific press. We have dozens of dedicated mounts that are purpose built for specific presses. Please find the one for your specific press.
- [9-3/4 Lift Up] Lifts your press up 9-3/4 above the work surface and gets the shellplate closer to eye level. 12-1/8 wide, 11-1/2 deep footprint and 9-3/4 tall
- [SOLID STEEL] Constructed from solid 3/16 plate steel, the Ultramount is super solid. Will not bend or flex while reloading and spreads the pressure load out to a much larger footprint on your reloading table or bench
- [Accessibility] Accessible lower storage tray and hardware for your press included. Note, when using the 4 and 7 1/2 Ultramount, with some presses, the press ram may have to hang over the bench edge and interfere with opening of drawers. Plan accordingly
- [Durability] Durable black powder coated finish. *** Note: 4 pieces of 1/4 diameter mounting bolts of whenever length/style are needed to secure to your bench or table. These are not included as the thickness/constructions of everyone's bench is different. Through bolting with washers on the underside is strongly recommended. Made in the USA
- See more on Amazon...
Brand: InLine Fabrication | Manufacturer: InLine Fabrication
Dimensions: 9.63 x 11.50 x 12.00 inches | Weight: 10.10 pounds
See On Amazon #5
InLine Fabrication Universal Double Bullet Tray System, Red Bins
Asin: B00PZR3QAE | Model: UBT-R | PartNumber: UBT-R
Includes Two 4" Wide X 5" Long X 3" Deep Red Bins.
Made In The Usa.
Mounts To The Rear Of Any Ultramount Riser System Or Bolts Directly To Your Bench.
2 Swivel Points Allow Flexibility To Position The Bins Where They're Most Comfortable For You.
Features
- Puts the bullets, casings or press tools perfectly within your reach
- 2 swivel points allow flexibility to position the bins where they're most comfortable for you
- Includes two 4 wide x 5 long x 3 deep red bins
- Mounts to the rear of any Ultramount Riser System or bolts directly to your bench
- Made in the USA
- See more on Amazon...
Brand: InLine Fabrication | Manufacturer: InLine Fabrication
Weight: 1.50 pounds
See On Amazon #6
InLine Fabrication Ultramount Quick Change Press Top Plates for Frankford Arsenal X-10 Progressive
Asin: B0C8QNYCJS
The Quick Change Plate Stays Attached To The Press Or Tool. The Base Stays Securely Attached To Your Reloading Bench. We Strongly Suggest One Or More Single Or Double Quick Change Docks To Store Presses Or Tools While Not In Use.
Choose From 4 Heights For The Base (See Listing Ultramount Quick Change Press Mounting System) And Buy As Many Top Plates As You Have Presses And Tools. Made In Oregon, Usa..
Greatly Increases Efficiency Of Changing Out Reloading Gear. All Settings Can Be Kept As Needed With Only 30 Seconds To Swap Out A Rcbs Rock Chucker For A Dillon 1050 Or A Redding Neck Concentricity Guage For An Rcbs Primer Pocket Swager Etc..
Swapping Out Presses/Tools Takes Less Than 30 Seconds And Requires No Tools! The Rear Of The Plate Slips Into The Top Of The Base And The Front Is Secured With Wing Nut Fastened Bolts (See Video).
Features
- Constructed from 3/16" thick steel these mounts are super solid and have a durable black powder coated finish. (THIS is ONLY the swappable top plate) see listing "Ultramount Quick Change Press Mounting System" for the four base options
- Swapping out presses/tools takes less than 30 seconds and requires no tools! The rear of the plate slips into the top of the base and the front is secured with wing nut fastened bolts (see video)
- The Quick Change Plate stays attached to the press or tool. The base stays securely attached to your reloading bench. We strongly suggest one or more Single or Double Quick Change Docks to store presses or tools while not in use
- Greatly increases efficiency of changing out reloading gear. All settings can be kept as needed with only 30 seconds to swap out a RCBS Rock Chucker for a Dillon 1050 or a Redding Neck Concentricity guage for an RCBS Primer Pocket Swager etc.
- Choose from 4 heights for the base (see listing Ultramount Quick Change Press Mounting System) and buy as many top plates as you have presses and tools. Made in Oregon, USA.
- See more on Amazon...
Brand: InLine Fabrication | Manufacturer: InLine Fabrication
See On Amazon
Looking For Something Else?
Search