20 Gauge Silicone Connector for JST, SIM&NAT 5.9 inch 2 Pin Male Female for JST RCY Plug Connectors Cable Wire for RC Toys Battery (10 Pair)
Asin: B071XN7C43 | Model: EA-JST-A-015M=10 | PartNumber: EA-JST-A-015M=10
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Length Of Cable: 15Cm / 5.9"; 20 Awg.
Package Included: 10 Pairs (10Pcs Female + 10Pcs Male) Connector Charging Line For Jst.
Sim&Nat Pigtail Wire For Jst Is Mainly Used For Mini Rc Helicopter, Indoor 3D Plane, Li-Po Battery, Esc Bec Board And Nimh Battery Connection And Etc..
Sim&Nat Silicone Wire Connector For Jst - Excellent Flexibility & Good Conductors: Tin Plated Copper, With Good Oxidative Stability And Weldability.
Features
- Material: 100% Silicone insulated. According to market investigation, many customers feedback that insulation which make from the PVC is easy to burn during using and even ruin the machine
- SIM&NAT Silicone Wire Connector for JST - Excellent Flexibility & Good Conductors: Tin plated copper, with good oxidative stability and weldability
- Length of Cable: 15cm / 5.9; 20 AWG
- SIM&NAT pigtail wire for JST is mainly used for mini RC helicopter, indoor 3D plane, Li-Po battery, Esc Bec Board and NiMh battery connection and etc.
- Package Included: 10 pairs (10pcs Female + 10pcs Male) Connector Charging Line for JST
- See more on Amazon...
Brand: SIM&NAT | Manufacturer: Blair Store
Weight: 0.13 pounds
See On Amazon Similar To 20 Gauge Silicone Connector for
#1
DC 3.7V 1500mah battery for Sony PS4 Wireless Controller Battery Replacement(CUH-ZCT2U,CUH-ZCT2E,CUH-ZCT2A 2016 and Later Models)dualshock Playstation 4,gen 2,New Version,Small plug,with light bar
Asin: B08M5N1SJJ | Model: 803450-2-1 | PartNumber: 803450-2-1 | Ean: 0054114076772 | UPC: 054114076772
★It‘S Consists Of Of Large-Capacity A+ Lithium Battery, Japanese Seiko Ic Overcharge And Overcurrent Short Circuit Protection Board, 3302-26 High Temperature Resistant Silicone Cable, And Genuine Jst Pitch1.5Mm 2-Pin Connector Module..
★If There Is Any Quality Problem Within One Year, Please Contact Us By Email At Any Time And Replace It Free Of Charge..
★The Red Wire Is The Positive Electrode “+” And The Black Wire Is The Negative Pole “-”。In Some Products, The Original Battery Has No Plug Or The Plug Does Not Match. It Doesn't Matter. You Can Directly Cut Off The Plug And Weld It Or Use Our Heat Shrinkable Insulating Sleeve To Connect The Wires Of The Same Color..
★803450 Rechargeable Lithium Ion Polymer Battery, Nominal Voltage 3.7V, Full Charge Voltage 4.2V, Capacity 1500Mah, Power 5.55Wh, Size 50.5×34×8Mm(1.998×1.338×0.314Inch）(L*W*T), Weight:31G(1.093Oz)，Maximum Current:1.5A。 It Can Prevent Overcharge, Overdischarge, Overcurrent, And Short Circuit..
Features
- Compatible with Sony PS4 Wireless Controller Battery Replacement(CUH-ZCT2U,CUH-ZCT2E,CUH-ZCT2A 2016 and later models) new Second generation with light stripe integrated controller 2nd generation,New Version,Small plug It can also be used in other 3.7-5V electronic products with power less than 5.55Wh (1500mAh).
- 803450 rechargeable lithium ion polymer battery, nominal voltage 3.7V, full charge voltage 4.2V, capacity 1500mAh, power 5.55Wh, size 50.5 34 8mm(1.998 1.338 0.314inch (L*W*T), Weight:31g(1.093oz) Maximum current:1.5A It can prevent overcharge, overdischarge, overcurrent, and short circuit.
- It s consists of of large-capacity A+ lithium battery, Japanese Seiko IC overcharge and overcurrent short circuit protection board, 3302-26 high temperature resistant silicone cable, and genuine JST Pitch1.5mm 2-pin connector module.
- The red wire is the positive electrode + and the black wire is the negative pole - In some products, the original battery has no plug or the plug does not match. It doesn't matter. You can directly cut off the plug and weld it or use our heat shrinkable insulating sleeve to connect the wires of the same color.
- If there is any quality problem within one year, please contact us by email at any time and replace it free of charge.
- See more on Amazon...
Brand: HXJNLDC | Manufacturer: HXJNLDC
Dimensions: 0.31 x 2.05 x 1.34 inches | Weight: 0.09 pounds
See On Amazon #2
ULLCHRO Nylon Watch Strap Replacement Canvas Watch Band Military Army Men Women - 18mm, 20mm, 22mm, 24mm Watch Bracelet with Stainless Steel Silver Buckle (24mm, Army Green)
Asin: B07R4JD9HF | Model: 1924JunLv | PartNumber: 1924JunLv | Ean: 0639631078173 | UPC: 639631078173
[Easy To Install] Here You Will Find Watch Straps Fitted With Special Spring Bars That Make It Quick And Easy To Change Your Watch Strap. In A Few Seconds You Can Remove And Fit The Watch Strap Without The Use Of Tools. With This Type Of Watch Strap, You Can Change The Style Of Your Watch To Go With Every Outfit, Or Just If You Feel Like It, By Changing The Watch Strap In A Few Seconds..
[Buy And Wear Yours With Confidence] We Take So Much Pride From Our Products, And We Guarantee Our Customers 100% Satisfaction Or 100% Money Back In 60 Days, No Question Asked..
[Suitable For Various Occasions] The Watch Strap Is Ideal For Outdoor And Athletic Activity And Perfect For Your Sports, And Features A Silver Tone Stainless Steel Buckle That Makes The Band Size Adjust Easily At Any Time. Eriod..
[Strength, Suppleness And Simplicity] This Nylon Watch Band Is A Good Choice For A Standard Dress Watch. It Is Stitched, And The Material Is Commonly Used With Military Grade Gear Due To Its Strength And Ability To Withstand Heavy Wear And Tear..
Features
- [Better Match] Military Nylon and kinds of colour choice will go best with your watch, diving gear or choice of clothes. This watch strap is also a good choice for a standard to heavy use watch.
- [Strength, Suppleness and Simplicity] This nylon watch band is a good choice for a standard dress watch. It is stitched, and the material is commonly used with military grade gear due to its strength and ability to withstand heavy wear and tear.
- [Easy To Install] Here you will find watch straps fitted with special spring bars that make it quick and easy to change your watch strap. In a few seconds you can remove and fit the watch strap without the use of tools. With this type of watch strap, you can change the style of your watch to go with every outfit, or just if you feel like it, by changing the watch strap in a few seconds.
- [Suitable for Various Occasions] The watch strap is ideal for outdoor and athletic activity and perfect for your sports, and features a silver tone stainless steel buckle that makes the band size adjust easily at any time. eriod.
- [Buy and Wear Yours with Confidence] We take so much pride from our products, and we guarantee our customers 100% satisfaction or 100% Money Back in 60 days, No Question Asked.
- See more on Amazon...
Brand: ULLCHRO | Manufacturer: ULLCHRO
Weight: 0.11 pounds
See On Amazon #3
2 Packs Power Wheel Adapter for Milwaukee M18 Battery Adapter 18V Power Wheels Battery Converter with Fuses & Wire Terminals, 12AWG Wire, Power Connector for DIY Rc Car Toys, Robotics and Rc Truck
Asin: B0B4F22W7Q | Model: JOSANG | PartNumber: JOSANG | Ean: 0791307216552 | UPC: 791307216552
✅Easy To Use, Only Need To Move The Power Adapter Into The Groove, Then Push Converter And Make Sure It Has Locked The Battery. If You Want To Remove The Adaptor From The Battery, Please Press Down The Buckle Of The Battery, Then Remove It. There Are 3 Fixing Screw Holes On The Adapter, Can Be Well Fixed To The Walls, Machines Or Diy Product..
✅Important Tips: This Converter Is Not A Charger, It Only Outputs The Voltage And Power Directly From Your Battery. The Red Wire Is Connected To The Positive Terminal, Black Wire Is Connected To The Negative Terminal. When Using, Make Sure That The Positive And Negative Wires Of The Device Correspond To The Positive And Negative Wires Of The Adapter. If Not Used For A Long Time, Please Be Sure To Remove The Battery Form The Adapter..
✅Widely Used, Power Wheels Adapter Has 12 Gauge Wire Installed, Maximum Permissible Current 20A, Can Use It To Upgrade Your Power Wheels, Rc Toys, Work Lights Or Robotics Diy With Enough Power. Package Includes 2 Pack Power Wheels Adaptors With Fuse Holderand 6 Pack 30Amp Fuse And 2Pack Wiring Terminal. (Note: Battery Not Included).
✅Better Security, Our Product Upgrade Has Some Security Design. Equipped With 30Amp Fuse Protects The Battery Equipment From Being Damaged By Excessive Power. Waterproof Fuse Holder Rubber Cap Fits On Tightly To Protect Blade Fuse Inside. High Quality Silicone Copper Wire Improves The Conductivity And Safety, Heat-Resistance 12 Awg Wire Is Suitable For High-Power Applications..
Features
- Compatible with Milwaukee M18 battery 18v series 48-11-1815 / 48-11-1820 / 48-11-1828 / 48-11-1840 / 48-11-1850 / 48-11-1860 and more. Our battery adapter connector is well-made, snug fit your battery, can install and lock battery easily. Made of durable ABS plastic, heat resistant and not easy to corrode, perfect for indoor and outdoor use.
- Better security, our product upgrade has some security design. Equipped with 30Amp fuse protects the battery equipment from being damaged by excessive power. Waterproof fuse holder rubber cap fits on tightly to protect blade fuse inside. High quality silicone copper wire improves the conductivity and safety, heat-resistance 12 AWG wire is suitable for high-power applications.
- Easy to use, only need to move the power adapter into the groove, then push converter and make sure it has locked the battery. If you want to remove the adaptor from the battery, please press down the buckle of the battery, then remove it. There are 3 fixing screw holes on the adapter, can be well fixed to the walls, machines or DIY product.
- Widely used, power wheels adapter has 12 gauge wire installed, Maximum permissible current 20A, can use it to upgrade your power wheels, rc toys, work lights or Robotics DIY with enough power. Package includes 2 pack power wheels adaptors with fuse holderand 6 pack 30Amp fuse and 2pack wiring terminal. (Note: battery not included)
- Important Tips: This converter is not a charger, it only outputs the voltage and power directly from your battery. The red wire is connected to the positive terminal, black wire is connected to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. If not used for a long time, please be sure to remove the battery form the adapter.
- See more on Amazon...
Brand: CHoiKWong | Manufacturer: CHoiKWong
Dimensions: 10.24 x 5.83 x 5.31 inches
Warranty: 12 months
See On Amazon #4
UHARBOUR Pool Fliter Pressure Gauge 60psi 1/4"NPT Bottom Mount, Pool Pressure Gauge, Pool Pump Pressure Gauge Replacement for Swimming Pool, Spa and Aquarium Valve Filter
Asin: B08FBW3KG6 | Model: JGD001 | PartNumber: JGD001 | Ean: 0795890825504 | UPC: 795890825504
Durable Movement And Smart Design, The Pool Pressure Gauge Is Equipped With Brass Wetted Parts,Accuracy: +/-2.5% Comply To Asme B40.100 Standard, Pressure Range To 60Psi/4Bar, Double Scales With Different Color, Easy To Read..
Equiped With Thread Adaptor Make This Pool Pressure Gauge Replacement Used Both For 1/8"Npt And 1/4"Npt Connection, Pressure Gauge For Pool Filter With Corrosion Resistant Sealant On The Thread..
Widly Used For Pressure Measuring On The Filter Of Swimming Pool,Spa, Aquarium Water And So On, Making It A Perfect Pressure Gauge For Pool Pump Filter And Sand Filters..
Special Protection Case With Obvious Mark On The Front Of The Pool Filter Gauge, Twist To Move Bezel, Help Operater To Set The Start And Clean Filter;.
Features
- PORFESSIONAL GRADE POOL FILTER PRESSURE GAUGE REPLACEMENT, Large 2"Dial, 1/4"NPT Center botton mount connection;
- SPECIAL PROTECTION CASE with obvious mark on the front of the pool filter gauge, twist to move bezel, help operater to set the start and clean filter;
- DURABLE MOVEMENT AND SMART DESIGN, the pool pressure gauge is equipped with brass wetted parts,accuracy: +/-2.5% comply to ASME B40.100 standard, Pressure range to 60psi/4bar, double scales with different color, easy to read.
- WIDLY USED for pressure measuring on the filter of swimming pool,Spa, Aquarium Water and so on, making it a perfect pressure gauge for pool pump filter and sand filters.
- EQUIPED WITH THREAD ADAPTOR make this pool pressure gauge replacement used both for 1/8NPT and 1/4NPT connection, pressure gauge for pool filter with corrosion resistant Sealant on the thread.
- See more on Amazon...
Brand: Uharbour | Manufacturer: Uharbour
Dimensions: 4.33 x 4.33 x 1.18 Inches
See On Amazon #5
BH Supplies 10ml Luer Lock Tip Syringes (No Needle) - Sterile, Individually Wrapped - 100 Syringes
Asin: B07KW4KLG2 | Model: 10MLLL | PartNumber: 10MLLL | Ean: 0638632928906 | UPC: 638632928906
User-Friendly Design: Smooth Plunger Allows For Easy Handling, Clear Marking, Easy To Read, And Leak-Free Operation..
Enhanced Sterility: Individually Sealed In Blister Packs To Maintain Maximum Sterility And Safety..
Quality And Durability: Made With Medical-Grade Plastic For Durability. Latex-Free Material For Safety..
Versatile Application: Suitable For Home Applications, Healthcare, Research, Personal Care, Veterinary, Industrial, And Agricultural Uses..
Features
- Secure and Accurate: Luer lock connector ensures a secure seal and precise measurements.
- Versatile Application: Suitable for home applications, healthcare, research, personal care, veterinary, industrial, and agricultural uses.
- User-Friendly Design: Smooth plunger allows for easy handling, clear marking, easy to read, and leak-free operation.
- Quality and Durability: Made with medical-grade plastic for durability. Latex-free material for safety.
- Enhanced Sterility: Individually sealed in blister packs to maintain maximum sterility and safety.
- See more on Amazon...
Brand: BH SUPPLIES | Manufacturer: BH SUPPLIES
See On Amazon #6
YAOAWE 2 Pack Hot Rod Igniter Kit Replacement for Pit Boss, Pellet Grill Igniter Rod Heating Element Compatible with Pitboss, for Traeger & Camp Chef Grill, with 2 Fuses
Asin: B09PNJBMRP
🍖𝐑𝐄𝐏𝐋𝐀𝐂𝐄𝐌𝐄𝐍𝐓 𝐈𝐆𝐍𝐈𝐓𝐄𝐑 𝐈𝐒 𝐄𝐀𝐒𝐘 𝐓𝐎 𝐈𝐍𝐒𝐓𝐀𝐋𝐋 𝐀𝐍𝐃 𝐃𝐔𝐑𝐀𝐁𝐋𝐄 - This Replacement Igniter Parts Was A Direct Install. Made Of Durable Materials And Is Guaranteed To Provide A Perfect Fit That Will Have Your Smoker Going Immediately. This Replacement Hot Rod Kits Can Keep The Fire Going When You Are On A Barbecue With Your Friends Or Family, Get Delicious Flavor With Hardwood Fuel, Important Replacement Accessories For Your Grills..
🔥𝐏𝐀𝐂𝐊𝐀𝐆𝐄 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐃 - Ignition Rod ×2, Screw ×2, Fuse ×2. The Metal Part Of The Igniter Is 4.3" And The Wire Lead Is 24", Which Can Help You To Replace The Old Or Bad Pellet Bbq Ignitor, Very Convenient For You. Yaoawe.
💯𝐏𝐑𝐎𝐅𝐄𝐒𝐒𝐈𝐎𝐍𝐀𝐋 𝐀𝐅𝐓𝐄𝐑-𝐒𝐀𝐋𝐄𝐒 𝐒𝐄𝐑𝐕𝐈𝐂𝐄 - If You Still Have Questions About The Compatible Model Of The Pellet Smoker Ignitor Replacement Rod After Looking At The Second Picture, Or If You Encounter Any Problems In The Process Of Using It, Please Do Not Hesitate To Contact Us. We Have A Professional After-Sales Team That Will Provide You With The Most Effective Solution Within 24 Hours..
🔥𝐏𝐄𝐑𝐅𝐄𝐂𝐓 𝐑𝐄𝐏𝐋𝐀𝐂𝐄𝐌𝐄𝐍𝐓 & 𝐖𝐎𝐑𝐊𝐄𝐃 𝐅𝐋𝐀𝐖𝐋𝐄𝐒𝐒𝐋𝐘 - The Grilling Igniter For Pit Boss Pellet Grill Models - 340, 440, 820Deluxe, Classic, 700D, 1000T4, Austin Xl, Navigator 850, Sportsman 1100, Pro Series Ii 1150Ps2 Etc. Work With Camp Chef Models - Pursuit 20, Smokepro Xt 24, Xxl Etc. And Fit For Oklahoma Joes Rider Dlx Pellet Grills Models, Details Refer To The Second Picture. (❗❗❗Note: Not Fit For Pit Boss Lockhart Model) Replacement Part Models: 70112, Pg24-21..
Features
- ? - To avoid pellet grill hot rod stopping working after a few BBQ sessions, only 1/8 to 1/4 inch 120V 200W ignitor rod should be showing in the firepot.
- & - The grilling igniter for Pit Boss pellet grill models - 340, 440, 820Deluxe, Classic, 700D, 1000T4, Austin XL, Navigator 850, Sportsman 1100, Pro Series II 1150PS2 etc. Work with Camp Chef models - Pursuit 20, SmokePro XT 24, XXL etc. And fit for Oklahoma Joes Rider DLX Pellet Grills models, details refer to the second picture. ( NOTE: Not Fit for Pit Boss LOCKHART Model) Replacement Part Models: 70112, PG24-21.
- - This replacement igniter parts was a direct install. Made of durable materials and is guaranteed to provide a perfect fit that will have your smoker going immediately. This replacement hot rod kits can keep the fire going when you are on a barbecue with your friends or family, get delicious flavor with hardwood fuel, important replacement accessories for your grills.
- - - If you still have questions about the compatible model of the pellet smoker ignitor replacement rod after looking at the second picture, or if you encounter any problems in the process of using it, please do not hesitate to contact us. We have a professional after-sales team that will provide you with the most effective solution within 24 hours.
- - Ignition rod 2, Screw 2, Fuse 2. The metal part of the igniter is 4.3 and the wire lead is 24, which can help you to replace the old or bad pellet bbq ignitor, very convenient for you. YAOAWE
- See more on Amazon...
Brand: YAOAWE | Manufacturer: YAOAWE
Warranty: Manufacturer warranty for 1 year from date of purchase
See On Amazon #7
haisstronica 520PCS Marine Grade Heat Shrink Wire Connectors-Electrical Connectors Kit of Tinned Red Copper,16-14 22-16 12-10 Gauge Crimp Insulated Ring Fork Spade Butt Splices(3Colors/24Size)
Asin: B08JGFGQXL | Ean: 0190372848925 | UPC: 190372848925
Extremely Reliable Crimping:The 3:1 Heat Shrink Connector With Adhesive Lined Will Exude Hot Melt Adhesive After Being Evenly Heated,Quickly Shrink And Adhesion To The Insulation Of The Wire.Create A Complete Environmental Seal.Waterproof,Wear-Resistant..
Buyer Confidence:We Stand Behind The Quality Of Our Products. If For Any Reason You Are Not Satisfied With Your Purchase,Please Contact Us.We Offer A 30-Day Money-Back Guarantee,And A 12-Month Replacement Warranty Giving Customers A 100% Satisfaction Guarantee For Risk-Free Purchases!.
Safe Wiring Projects:The Brazed-Seam Terminal Connector, Ensures Strong Sealing Crimps.Salt-Resistance,And Corrosion Resistance,Provide Reliable Wiring..
99.9% Pure Copper Tinned:Effectively Prevent Copper Layer Rust And Then Cause Bad Contact,Anti Oxidation Prevent Electrical Sparks.Strong Conductive..
Features
- GOOD QUALITY MARINE GRADE WIRE TERMINATION:The Haisstronica heat shrink connectors kit includes ring,fork, spade,and heat shrink butt connectors.The right quality wire connectors,for the right job,are always worth expense.
- 99.9% PURE COPPER TINNED:Effectively prevent copper layer rust and then cause bad contact,anti oxidation prevent electrical sparks.Strong conductive.
- EXTREMELY RELIABLE CRIMPING:The 3:1 heat shrink connector with adhesive lined will exude hot melt adhesive after being evenly heated,quickly shrink and adhesion to the insulation of the wire.Create a complete environmental seal.Waterproof,Wear-resistant.
- SAFE WIRING PROJECTS:The Brazed-seam terminal connector, ensures strong sealing crimps.Salt-resistance,and corrosion resistance,provide reliable wiring.
- BUYER CONFIDENCE:We stand behind the quality of our products. If for any reason you are not satisfied with your purchase,please contact us.We offer a 30-day money-back guarantee,and a 12-month replacement warranty giving customers a 100% Satisfaction Guarantee for risk-free purchases!
- See more on Amazon...
Brand: haisstronica | Manufacturer: haisstronica
See On Amazon #8
SUNVIE Low Voltage Wire Connector Fastlock2 Landscape Lighting Wire Connectors Waterproof Low Voltage Connector 12-18 Gauge Landscape Wire Connector for Landscape Light Pathway Lights, 8 Pack
Asin: B09JVWWHP4 | Ean: 0603977462958 | UPC: 603977462958
【Ultra Strong Material】Sunvie Fastlock2 Landscape Lighting Connectors Are Made Of Extremely Sturdy Nylon Plastic + Fiberglass Mixture And Cnc Machined Nickel- Plated Brass Pin To Ensure Corrosion Resistance And Electrical Conductivity For Outdoor Use..
【Lifetime Warranty】60-Day Money-Back Guarantee, 5-Years Replacement Warranty And Lifetime After-Sales Support Guarantee. Feel Free To Contact Our Customer Service Team If You Encounter Any Issue..
【Wide Application】Perfectly Match 12/14/16/18 Awg Low Voltage Landscape Lighting Wire. Fit For Landscape Lights, Path Lights, In-Gound Lights, Deck Ligths, Etc. With 16/18/20/22 Gauge Wire. Widely Used In Garden, Pathway, Driveway, Yard, Patio, Lawn, Walls, Trees, Flags Etc..
【Easy To Install】No Crimping, No Cutting, No Splicing. Our Fastlock2 Low Voltage Wire Connector With Three-Piece Screwing Design, Easily Connect Your All Kinds Of Landscape Lights To The Low Voltage Cable In Few Minutes..
Features
- Upgraded, Covering 8 Lights SUNVIE fastlock2 low voltage landscape lighting connector with 2021 new upgrade. Only 1 connector is required per connection. 8 connectors cover 8 lights, making connection easier. PATENT NO.: US D935,409 S
- Easy to Install No crimping, No cutting, No splicing. Our fastlock2 low voltage wire connector with three-piece screwing design, easily connect your all kinds of landscape lights to the low voltage cable in few minutes.
- Ultra Strong Material SUNVIE fastlock2 landscape lighting connectors are made of extremely sturdy nylon plastic + fiberglass mixture and CNC machined nickel- plated brass pin to ensure corrosion resistance and electrical conductivity for outdoor use.
- Wide Application Perfectly match 12/14/16/18 AWG low voltage landscape lighting wire. Fit for landscape lights, path lights, in-gound lights, deck ligths, etc. with 16/18/20/22 gauge wire. Widely used in garden, pathway, driveway, yard, patio, lawn, walls, trees, flags etc.
- Lifetime Warranty 60-day money-back guarantee, 5-years replacement warranty and lifetime after-sales support guarantee. Feel free to contact our customer service team if you encounter any issue.
- See more on Amazon...
Brand: SUNVIE | Manufacturer: SUNVIE
Dimensions: 1.58 x 1.07 x 0.49 inches | Weight: 0.29 pounds
Warranty: 5-years replacement warranty and lifetime after-sales support guarantee.
See On Amazon #9
SUNVIE Fastlock2 Low Voltage Wire Connector Landscape Lighting Connectors 12-18 Gauge Waterproof Wire Connectors Outdoor Low Voltage Wire Connectors for Landscape Lighting Garden Path Lights 24 Pack
Asin: B0B9M2N9GN | Model: LVCO0224 | PartNumber: LVCO0224
High Compatibility - Perfectly Match 12/14/16/18 Awg Low Voltage Landscape Lighting Wire. Fit For Landscape Lights, Pathway Lights, In-Ground Lights, Deck Step Lights, Well Lights, Etc. With 16/18/20/22 Gauge Wire. Widely Used In Garden, Pathway, Walkway, Driveway, Yard, Patio, Lawn, Walls, Trees, Flags Etc..
Hassle-Free Lifetime Warranty - 60-Day Money-Back Guarantee, 5-Year Replacement Warranty And Lifetime After-Sales Support Guarantee. Feel Free To Contact Our Customer Service Team If You Encounter Any Issue..
Easy Installation - No Crimping, No Cutting, No Splicing. Three-Piece Screwing Design Ensure Reliable Connection And Save Connection Time. Quickly And Easily Connect Your Lighting Fixture To The Low Voltage Wire In Less Than 2 Minutes..
Reliable Quality - Ultra Strong Nylon Plastic + Fiberglass Mixture And Nickel Plated Brass Pin To Ensure Its Corrosion Resistance And Electrical Conductivity, Still Holding Good Connection After A Long Time Use. A Nice Choice For You To Use Outdoor Lighting Fixtures For A Long Time..
Features
- UPGRADED WIRE CONNECTORS - 24 pack upgraded SUNVIE fastlock2 low voltage landscape lighting connector. Only one is required per connection, one connector is equal to others two, make connection easier. 24 pack are enough to connect 24 lights. PATENT NO.: US D935, 409S
- RELIABLE QUALITY - Ultra strong nylon plastic + fiberglass mixture and nickel plated brass pin to ensure its corrosion resistance and electrical conductivity, still holding good connection after a long time use. A nice choice for you to use outdoor lighting fixtures for a long time.
- HIGH COMPATIBILITY - Perfectly match 12/14/16/18 AWG low voltage landscape lighting wire. Fit for landscape lights, pathway lights, in-ground lights, deck step lights, well lights, etc. with 16/18/20/22 gauge wire. Widely used in garden, pathway, walkway, driveway, yard, patio, lawn, walls, trees, flags etc.
- EASY INSTALLATION - No crimping, No cutting, No splicing. Three-piece screwing design ensure reliable connection and save connection time. Quickly and easily connect your lighting fixture to the low voltage wire in less than 2 minutes.
- HASSLE-FREE LIFETIME WARRANTY - 60-day money-back guarantee, 5-year replacement warranty and lifetime after-sales support guarantee. Feel free to contact our customer service team if you encounter any issue.
- See more on Amazon...
Brand: SUNVIE | Manufacturer: SUNVIE
Dimensions: 1.58 x 1.07 x 0.49 inches | Weight: 0.84 Pounds
Warranty: Lifetime.
See On Amazon #10
LINKITOM New Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80" Inches
Asin: B07RQR7DGV | Ean: 0608631397119 | UPC: 608631397119
Compliant With Dot Approved Standards: The Lamp Shade Of Utility Trailer Light Kit With Corrosion Resistant Abs Material, Compliant With Dot Approved Standards.
Widely Used: Widely Applicable To 80 Inch Width Tractor, Such As Truck, Trailer, Boat, Bus, Lorry, Van, Caravan, Snowmobile, Etc. Please Make Sure Wires Connect Correctly And No Electronic Short Before Underwater..
25Ft Wiring Harness Have Superior Quality Guaranteed Than The Traditional Copper Coated Aluminum Wires And Split Y-Style Color Coded Harness. Fully Operable In Inclement Weather, These Trailer Lights Are Tough And Used For The Long Term..
Ip68 Waterproof And Submersible: There Is No Screw On The Lamp Shade , The Led Trailer Lights Are Completely Welded Together, The Circuit Board Of Tail Light Is Seal. A Drain Hole Is Designed To Pull Out All The Water. This Is To Guarantee That Water Will Not Damage The Diodes Or Circuit Board. Excellent Tightness Makes It Be Definitely Waterproof And Submersible.Please Install The Trailer Taillights With The Drain Hole Downwards..
Features
- HALO Trailer Light Kit : Trailer tail light kits has everything you need, includes two stop turn LED tail lights(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker.
- IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards.
- Compliant with DOT approved standards: The lamp shade of utility trailer light kit with corrosion resistant ABS material, compliant with DOT approved standards
- 25ft wiring harness have superior quality guaranteed than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and used for the long term.
- Widely Used: Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater.
- See more on Amazon...
Brand: LINKITOM | Manufacturer: Linkitom
Weight: 1.00 pounds
See On Amazon #11
14 Gauge Jumper Wires Alligator Clips to Alligator Clip Heavy Duty Silicone Test Leads Set 2Pcs 39"/1m
Asin: B07L29V4Z2 | Model: test lead-14awg | PartNumber: test lead-14awg | Ean: 8011579248405
Insulated Alligator Clip Jaw Opening:10Mm Nominal Voltage: 600V Testing Voltage:2000V.
Silicone Cable Diameter:3.5Mm Cable Length : 3 Feet / 39" / 1 Meter.
Thick Cable: 14 Awg / Copper Core Copper Number: 400/0.08Mm Bear Current: 20A.
Type: Double Ends Alligator Clip Test Leads Cable Connector. Great For All Electrical Testing And Electronic Applications For Things Like Automotive Accessories.
Features
- Alligator Clip Test Leads: 1pcs Red and 1pcs Black
- Type: Double ends Alligator Clip Test Leads Cable Connector. Great for all electrical testing and electronic applications for things like automotive accessories
- Insulated Alligator Clip Jaw Opening:10mm Nominal Voltage: 600V Testing Voltage:2000V
- Thick Cable: 14 AWG / Copper Core Copper Number: 400/0.08mm Bear Current: 20A
- Silicone Cable Diameter:3.5mm Cable length : 3 Feet / 39 / 1 Meter
- See more on Amazon...
Brand: zhenyu | Manufacturer: Bei Qian
Weight: 0.00 Pounds
See On Amazon #12
PetsTEK 10 Pack Waterproof Wire Splice Kit for Wire Break Repair in Electric In-Ground Dog Fence Systems
Asin: B018RMFKAC | Model: FBA_Pet-0941 | PartNumber: FBA_Pet-0941 | Ean: 0710661867149, 0627164163695 | UPC: 627164163695, 710661867149
The Tube Is Filled With Waterproof Gel, That Protects Exposed Wires From Rust And Corrosion..
Petstek Waterproof Wire Splice Kit Is Made In The Usa..
The Kit Is Designed To Work With 12, 14, 16, 18 And 20 Gauge Wires. Total Tube Length (Including The Cap) – 2.68”, Inside Tube Diameter - .5”..
Package Contains 10 Wire Splice Kits – 10 Tubes, 10 Wire Nuts And The Instruction Card..
Features
- PetsTEK Wire Splice Kit for Electric In-Ground Dog Fence Systems. Compatible with All PetSafe, SportDog and Dogtra Underground Fence Systems.
- Package Contains 10 Wire Splice Kits 10 Tubes, 10 Wire Nuts and the Instruction Card.
- The Tube is Filled with Waterproof Gel, That Protects Exposed Wires from Rust and Corrosion.
- The Kit is Designed to Work with 12, 14, 16, 18 And 20 Gauge Wires. Total Tube Length (including the cap) 2.68 , Inside Tube Diameter - .5 .
- PetsTEK Waterproof Wire Splice Kit is Made in the USA.
- See more on Amazon...
Brand: PetsTEK | Manufacturer: PetsTEK
Dimensions: 1.50 x 5.00 x 4.00 inches | Weight: 0.02 pounds
See On Amazon #13
utah pneumatic 1/4 Dot Air Line 0.25" Od 32.8 Feet 10 Meters Saej844 Nylon 1/4 Hose Dot Approved For Air Tubing Air Brake System Or Fluid Transfer 1/4" Air Hose (1/4 Air Line)
Asin: B074KD1DCH | Model: Huawei Mate 20 PRO | PartNumber: Huawei Mate 20 PRO | Ean: 0652827872287 | UPC: 652827872287
For Air Suspension Systems, Air Brake Systems, And Fluid Transfer, This Nylon Hose Is The Perfect Choice For Automotive Replacements And Air Suspension Kits. Nylon Pa 12 Material, This Hose Is Designed To Handle The Demands Of Air Brake Systems And Fluid Transfer. 1/4" Polyamide Air Bag Hose, The Ideal Choice For Your Pneumatic Needs. This Air Hose Is Designed To Provide Flexibility, Durability, And Optimal Airflow For Various Applications Such As Air Horns, Train Horns, And Lowrider Setups..
Made From High-Quality Polyamide Material, This Air Hose Boasts Excellent Resistance To Wear, And Impact. Its 1Mm Pipe Thickness This Flexible Tube To Withstand High-Pressure Conditions And Provide Seamless Airflow.Upgrade Your Pneumatic System . Experience The Flexibility, Durability, And Optimal Performance.It Can Bend And Flex Without Kinking Or Restricting Airflow,.
1/4 Inch Nylon Hose Is Compatible And Can Be Used With Air Brake Hose And 1/4 Inch Dot Tubing, Making It A Versatile Choice For Various Pneumatic Applications. Whether You Need It For Air Brake Systems, Air Suspension Kits, Or Fluid Transfer, This Nylon Hose Will Meet Your Needs With Ease.Featuring A Flexible And Lightweight Design, This Nylon Hose Enables Easy Installation And Maneuverability..
Upgrade Your Pneumatic System With Our Tubing 1/4 Air Brake Line Pneumatic Hose. This Tubing Offers Excellent Flexibility And Resilience. Its 1/4 Inch Size Ensures Compatibility With Various Fittings And Pneumatic Systems, Providing Ease Of Installation And Versatility.Trust The Safety And Reliability Of Our Dot Airline Tubing. This 1/4 Inch Tubing Meets Dot Standards, For Air Brake Applications,.
Features
- Working Pressure Of 1mpa (150 Psi) And A Max Pressure 450 Psi. Bending Radius 40mm This Air Brake Tubing Is Designed To Withstand Extreme Conditions, With A Working Temperature Range Of -40 To +60 . Ensure Efficient And Reliable Braking With Our 1/4" Air Hose Nylon Brake Air Line Kit. This Nylon Brake Line Is Constructed To The Highest Standards,
- Upgrade Your Pneumatic System With Our Tubing 1/4 Air Brake Line Pneumatic Hose. This Tubing Offers Excellent Flexibility And Resilience. Its 1/4 Inch Size Ensures Compatibility With Various Fittings And Pneumatic Systems, Providing Ease Of Installation And Versatility.trust The Safety And Reliability Of Our Dot Airline Tubing. This 1/4 Inch Tubing Meets Dot Standards, For Air Brake Applications,
- For Air Suspension Systems, Air Brake Systems, And Fluid Transfer, This Nylon Hose Is The Perfect Choice For Automotive Replacements And Air Suspension Kits. Nylon Pa 12 Material, This Hose Is Designed To Handle The Demands Of Air Brake Systems And Fluid Transfer. 1/4 Polyamide Air Bag Hose, The Ideal Choice For Your Pneumatic Needs. This Air Hose Is Designed To Provide Flexibility, Durability, And Optimal Airflow For Various Applications Such As Air Horns, Train Horns, And Lowrider Setups.
- 1/4 Inch Nylon Hose Is Compatible And Can Be Used With Air Brake Hose And 1/4 Inch Dot Tubing, Making It A Versatile Choice For Various Pneumatic Applications. Whether You Need It For Air Brake Systems, Air Suspension Kits, Or Fluid Transfer, This Nylon Hose Will Meet Your Needs With Ease.featuring A Flexible And Lightweight Design, This Nylon Hose Enables Easy Installation And Maneuverability.
- Made From High-quality Polyamide Material, This Air Hose Boasts Excellent Resistance To Wear, And Impact. Its 1mm Pipe Thickness This Flexible Tube To Withstand High-pressure Conditions And Provide Seamless Airflow.upgrade Your Pneumatic System . Experience The Flexibility, Durability, And Optimal Performance.It Can Bend And Flex Without Kinking Or Restricting Airflow,
- See more on Amazon...
Brand: utah pneumatic | Manufacturer: utah pneumatic
Dimensions: 1.50 x 9.50 x 9.50 inches | Weight: 0.44 Pounds
See On Amazon #14
FXC 'Purishion 10x 3/4 in' Round LED Clearence Light Front Rear Side Marker Indicators Light for Truck Car Bus Trailer Van Caravan Boat, Taillight Brake Stop Lamp (12V, Red+Amber)
Asin: B01MEG40NI | Model: 5869570855 | PartNumber: 5869570855 | Ean: 0714485234026 | UPC: 714485234026
It Can Be Used As Clearance Lamps, Side Marker Or Identification Light,Trailer Light Etc. 3 Colors Of Light For Your Choice: Amber,White,Red..
Easy To Install And Durable.With Our Strict Quality Control System, We Test Each Item And 100% Ensure In Good Condition Before We Ship..
3 Led Lens Inside Of The Lamp Offer Extreme Bright Light. Sae P2 Pc,Dot. Waterproof Lens,Sealed Light.
Features
- 12V,universal design for all cars, SUV, pickup,truck,trailer,boat etc.
- 3 LED lens inside of the lamp offer extreme bright light. SAE P2 PC,DOT. Waterproof Lens,sealed Light
- It can be used as clearance Lamps, side marker or identification light,Trailer Light etc. 3 colors of light for your choice: amber,white,red.
- Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.
- See more on Amazon...
Brand: FXC | Manufacturer: Purishion
Dimensions: 0.75 x 0.75 x 0.80 inches | Weight: 0.02 pounds
See On Amazon #15
Nilight 48 /49 LED Tailgate Light Strip 90 LED Red/White for Running Light Brake / Turn Signal / Reverse Light 2 Years Warranty
Asin: B0841K5FJB | Model: TR-11 | PartNumber: TR-11 | Ean: 0812227032531 | UPC: 812227032531
Easy Installation: Just Peel The Adhesive Tape And Stick The Strip On The At The Tailgate, Can Also Use The Additional Mounts And Screws For Extra Secure. And Then Plug And Play The Standard 4 Flat Pin Connector, Connect He Red Reverse Light Wire To Any 12V Positive Wire. (Note: Test Left & Right Turn Signal Lights First Before You Stick The Strip Light).
Widely Applicable: Widely Applicable For Any 12V Dc, 48” Or 49 Inch Wide Pickups, Trailers, Truck, Towing Vehicle, Cars Etc.
Fit Type: Universal Fit. 2 Years Warranty Honored By Nilight..
Premium Quality For All Seasons: Being Fully Silicon-Sealed And Flexible, Can Withstand Any Bad Weather And Harsh Environment. Outlasts With A Lifespan Over 50, 000 Hours..
5 Full Functions: Dark Red Running Light, Bright Red Brake Light, Bright Red Left & Right Turn Signals Light, White Reverse Light..
Features
- Impressive Brightness: Light strip include 90 2835 LED chips, each LED outputs 24-26 LM 6000K super bright light for safe night.
- 5 Full Functions: Dark red running light, bright red brake light, bright red left & right turn signals light, white reverse light.
- Easy Installation: Just peel the adhesive tape and stick the strip on the at the tailgate, can also use the additional mounts and screws for extra secure. And then plug and play the standard 4 flat pin connector, connect he red reverse light wire to any 12V positive wire. (Note: Test Left & Right turn signal lights first before you stick the strip light)
- Premium Quality For All Seasons: Being fully silicon-sealed and flexible, can withstand any bad weather and harsh environment. Outlasts with a lifespan over 50, 000 hours.
- Widely Applicable: Widely applicable for any 12V DC, 48 or 49 inch wide pickups, trailers, truck, towing vehicle, cars etc
- Fit Type: Universal Fit. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #16
TOPSTRONGGEAR 4 Gauge 25ft Black and 25ft Red Power/Ground Wire-Copper Clad Aluminum CCA-True 4 AWG Power Wire-True Spec and Soft Touch Cable - 25FT Red & 25FT Black
Asin: B08N4XLGXC | Model: TG-4GA Black power cable | PartNumber: TG-4GA Black power cable | Ean: 0707772466583 | UPC: 707772466583
Soft-Touch Pvc Jacket Maximizing Flexibility And Durability- Topstronggear True Spec 4 Gauge Wires Come With A Rugged Pvc Jacket, Offering Both Flexibility And Durability For Challenging Placements. Its Soft-Touch Design Suits Electrical And Auto Repair Installations, Providing Indoor Use Versatility With Built-In Resilience To Impacts And Diverse Conditions. Extreme Heat Tested.
Wide Compatibility- Dedicated To Offering Top-Notch Wiring Solutions For A Variety Of Projects, Including Car Audio Systems, Home Stereos, Rv Trailers, Solar Panel Installations, And More. Please Note, The Gauge Should Be Used Appropriately, And Topstronggear Is Not Liable For Improper Use.Grade A- Cca Power Wire.
Simplifies Polarity Identification -Easy Color Coded Power And Ground Wires, Ensuring Easy Connection To The Correct Terminals During Installation. This Prevents Potential Damage To Your Audio Equipment That Could Result From Polarity Errors. The Differently Colored Jackets Serve As A Visual Guide, Facilitating Easy Polarity Identification And Safeguarding Against Potential Damages Caused By Incorrect Connections..
Premium Copper-Clad Aluminum (Cca) Wire Contains 30% Copper- Ensuring Robust Power Transfer In A Lightweight Design. Topstronggear Cca With 30% Ofc Wires Maintain Maximum Flexibility While Providing The Strength Needed For Efficient Power Transfer At An Affordable Price Point. For Specific Power Demands, Explore Our Range Of Premium Oxygen-Free Pure Copper (Ofc) Wiring Alternatives..
Features
- TURE 4 AWG GAUGE BLACK&RED POWER/GROUND WIRE-TopstrongGear 4 gauge 50-feet (15.24m) red & black power/ground wire meets American Wire Gauge(AWG) standard, offering true-to-gauge quality that guarantees the necessary power flow for your wiring projects. Thicker wire presents less resistance to current flow.
- PREMIUM COPPER-CLAD ALUMINUM (CCA) WIRE CONTAINS 30% COPPER- Ensuring robust power transfer in a lightweight design. TopstrongGear CCA with 30% OFC wires maintain maximum flexibility while providing the strength needed for efficient power transfer at an affordable price point. For specific power demands, explore our range of premium Oxygen-Free Pure Copper (OFC) wiring alternatives.
- SOFT-TOUCH PVC JACKET MAXIMIZING FLEXIBILITY AND DURABILITY- TopstrongGear true spec 4 gauge wires come with a rugged PVC jacket, offering both flexibility and durability for challenging placements. Its soft-touch design suits electrical and auto repair installations, providing indoor use versatility with built-in resilience to impacts and diverse conditions. Extreme Heat Tested
- SIMPLIFIES POLARITY IDENTIFICATION -Easy color coded power and ground wires, ensuring easy connection to the correct terminals during installation. This prevents potential damage to your audio equipment that could result from polarity errors. The differently colored jackets serve as a visual guide, facilitating easy polarity identification and safeguarding against potential damages caused by incorrect connections.
- WIDE COMPATIBILITY- Dedicated to offering top-notch wiring solutions for a variety of projects, including car audio systems, home stereos, RV trailers, solar panel installations, and more. Please note, the gauge should be used appropriately, and TopstrongGear is not liable for improper use.Grade A- CCA Power Wire
- See more on Amazon...
Brand: TOPSTRONGGEAR | Manufacturer: TOPSTRONGGEAR
Dimensions: 1.18 x 8.66 x 8.66 Inches
See On Amazon #17
20 PCS Alligator Clips Electrical, 5-Color 21.5inch Test Leads with Alligator Clips, Stamping Jumper Wires for Electrical Testing, Circuit Connection, Experiment
Asin: B0995KJWR5 | Ean: 0727380269826 | UPC: 727380269826
Non-Slip & Forceful: Alligator Clips Electrical Are Made Of Nickel-Plated Steel With A Strong Spring And A Strong Connection To Ensure Good Conduction..
What You Get: 20 Pcs Alligator Clips Electrical, Our 7*24 Friendly Customer Service For Peace Of Mind..
Widely Used: Widely Used In Laboratory, Electrical Testing, Such As Experiments, Circuit Boards, Prototyping, Troubleshooting, Etc. It Can Be Used In Laboratories, Shops, Schools, Homes And Industries..
Safety & Durability: The Jumper Wire Is Made Of Pvc Material, Safe And Reliable, Strong Elastic Force. Test Lead Surface Plating, Glossy. Does Not Cause Wire Crossing Or A Short Circuit..
Features
- PACKAGE INCLUDES: 20 Pcs test leads with alligator clips. Five colors, four of each color. 5 color test leads are convenient to keep track of the situation, help you distinguish one from another visual.
- SAFETY & DURABILITY: The jumper wire is made of PVC material, safe and reliable, strong elastic force. Test lead surface plating, glossy. Does not cause wire crossing or a short circuit.
- NON-SLIP & FORCEFUL: Alligator clips electrical are made of nickel-plated steel with a strong spring and a strong connection to ensure good conduction.
- WIDELY USED: Widely used in laboratory, electrical testing, such as experiments, circuit boards, prototyping, troubleshooting, etc. It can be used in laboratories, shops, schools, homes and industries.
- WHAT YOU GET: 20 PCS alligator clips electrical, our 7*24 friendly customer service for peace of mind.
- See more on Amazon...
Brand: Romeda | Manufacturer: Romeda
See On Amazon #18
BNTECHGO 10 Gauge Silicone Wire 10 ft red and 10 ft Black Flexible 10 AWG Stranded Tinned Copper Wire
Asin: B01ABOPO2S | Model: SW10G105008F10C2 | PartNumber: SW10G105008F10C2 | Ean: 0742271695096, 0723260379135 | UPC: 723260379135, 742271695096
They Are Constructed With Premium Silicone Rubber Insulation.High Temperature Resistance 200 Degree C,Low Temperature Resistance,In Extreme Cold -60 Degree C.Rated Voltage: 600 Volts.Outside Diameter 5.5 Mm,Tolerance +/- 0.1 Mm..
Bntechgo Silicone Wire Are Widely Used For Model Planes,Model Cars,Model Ships,Lamps,Household Appliances,Electric Heating Appliances,Meters,Instruments,Motor And Digital Fields..
10 Gauge Silicone Wire Kit: 2 Colors,Red And Black,Each Color 10 Ft,Total 20 Feet..
High Strand Count Copper Core,10 Awg Silicone Stranded Wire Has 1050 Strands 0.08 Mm Tinned Copper Wire,The Copper Strands Are Tinned,Protecting Them From Corrosion And Making It Easier To Solder..
Features
- High Quality Ultra Flexible Soft Silicone Rubber Copper Wire!Super Low Impedance,Highly Efficient!
- High strand count copper core,10 AWG silicone stranded wire has 1050 strands 0.08 mm tinned copper wire,the copper strands are tinned,protecting them from corrosion and making it easier to solder.
- They are constructed with premium silicone rubber insulation.High temperature resistance 200 degree C,Low temperature resistance,in extreme cold -60 degree C.Rated Voltage: 600 volts.Outside diameter 5.5 mm,tolerance +/- 0.1 mm.
- 10 gauge silicone wire kit: 2 colors,red and black,each color 10 ft,total 20 feet.
- BNTECHGO silicone wire are widely used for model planes,model cars,model ships,lamps,household appliances,electric heating appliances,meters,instruments,motor and digital fields.
- See more on Amazon...
First Available: 01/01/2024
Brand: BNTECHGO | Manufacturer: bntechgo.com
Dimensions: 0.30 x 7.80 x 5.50 inches | Weight: 0.16 pounds
See On Amazon #19
Goupchn 5PCS Alligator Clips Test Leads Dual Ended Crocodile Wire Cable with Insulators Clips Test Flexible Copper Cable for Electrical Testing 3.3ft/1m
Asin: B083K7PXYY | Model: 1201 | PartNumber: 1201
Function: Suitable For All Electrical Testing, Electronic Applications Like Automotive Accessories And Testing Circuits On Your Vintage Cars, Trucks And Motorcycle. As Long As Whatever You Are Testing Uses A Fuse Of 15A Or Smaller..
Warranty: Hope You Can Be Satisfied With Our Test Leads. We Provide Guarantee Of A 30-Day Replacement Or Refund For Any Problem And 1 Year Warranty. If You Have Any Question, Feel Free To Contact Us..
Package Include: 5Pcs Alligator Clips Test Leads. 5 Colors Make It Easy To Distinguish Them During Use..
Sturdy: The Alligator Clip Is Firmly Fixed To The Wire, And The Rubber Insulation Layer Ensures That It Will Not Slip During Use. The Spring On The Crocodile Clip Is Strong Enough And Will Not Deform As You Use It More Often..
Features
- Copper: Both ends of the test leads are pure copper alligator clips. The maximum width of the crocodile clips opening is 10mm. Lead length: 3.3ft. Voltage: 1000V. Current: 15A.
- Sturdy: The alligator clip is firmly fixed to the wire, and the rubber insulation layer ensures that it will not slip during use. The spring on the crocodile clip is strong enough and will not deform as you use it more often.
- Function: Suitable for all electrical testing, electronic applications like automotive accessories and testing circuits on your vintage cars, trucks and motorcycle. As long as whatever you are testing uses a fuse of 15A or smaller.
- Package include: 5PCS alligator clips test leads. 5 colors make it easy to distinguish them during use.
- Warranty: Hope you can be satisfied with our test leads. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us.
- See more on Amazon...
Brand: Goupchn | Manufacturer: Goupchn
Weight: 0.42 pounds
Warranty: 1 Year
See On Amazon #20
BNTECHGO 12 Gauge Silicone Wire 10 ft red and 10 ft Black Flexible 12 AWG Stranded Tinned Copper Wire
Asin: B01ABOPMEI | Model: SW12G68008F10C2 | PartNumber: SW12G68008F10C2 | Ean: 0742271695195, 0723260379166 | UPC: 723260379166, 742271695195
They Are Constructed With Premium Silicone Rubber Insulation.High Temperature Resistance 200 Degree C,Low Temperature Resistance,In Extreme Cold -60 Degree C.Rated Voltage: 600 Volts.Outside Diameter 4.5 Mm,Tolerance +/- 0.1 Mm..
Bntechgo Silicone Wire Are Widely Used For Model Planes,Model Cars,Model Ships,Lamps,Household Appliances,Electric Heating Appliances,Meters,Instruments,Motor And Digital Fields..
12 Gauge Silicone Wire Kit: 2 Colors,Red And Black,Each Color 10 Ft,Total 20 Feet..
High Strand Count Copper Core,12 Awg Silicone Stranded Wire Has 680 Strands 0.08 Mm Tinned Copper Wire,The Copper Strands Are Tinned,Protecting Them From Corrosion And Making It Easier To Solder..
Features
- High Quality Ultra Flexible Soft Silicone Rubber Copper Wire!Super Low Impedance,Highly Efficient!
- High strand count copper core,12 AWG silicone stranded wire has 680 strands 0.08 mm tinned copper wire,the copper strands are tinned,protecting them from corrosion and making it easier to solder.
- They are constructed with premium silicone rubber insulation.High temperature resistance 200 degree C,Low temperature resistance,in extreme cold -60 degree C.Rated Voltage: 600 volts.Outside diameter 4.5 mm,tolerance +/- 0.1 mm.
- 12 gauge silicone wire kit: 2 colors,red and black,each color 10 ft,total 20 feet.
- BNTECHGO silicone wire are widely used for model planes,model cars,model ships,lamps,household appliances,electric heating appliances,meters,instruments,motor and digital fields.
- See more on Amazon...
Brand: BNTECHGO | Manufacturer: bntechgo.com
Dimensions: 0.30 x 7.80 x 5.50 inches | Weight: 0.44 pounds
See On Amazon
Looking For Something Else?
Search