uxcell Aluminum 5mm Bore Toothless Timing Belt Pulley for 6mm Belt
Asin: B07263NW7G | Model: a17041300ux0111 | PartNumber: a17041300ux0111
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suits To The Timing Belt Which Is 6Mm In Width..
Package Content: 1 X Timing Belt Pulley.
Widely Used In Milling Machine, Drilling Machine, 3D Printer Or Other Machinery Transmission.
Bore: 5Mm; Total Size: 17.8*17.8*8.5Mm(L*W*H);.
Features
- Material: Aluminum
- Bore: 5mm; Total Size: 17.8*17.8*8.5mm(L*W*H);
- Suits to the timing belt which is 6mm in width.
- Widely used in milling machine, drilling machine, 3D printer or other machinery transmission
- Package Content: 1 x Timing Belt Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 1.18 x 1.18 Inches
See On Amazon Similar To uxcell Aluminum 5mm Bore Toothless
#1
uxcell Round Steel Rod, 5mm HSS Lathe Bar Stock Tool 200mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 2pcs
Asin: B07KT39M7P | Model: a18103100ux0119 | PartNumber: a18103100ux0119
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 5mm / 0.2"; length: 200mm / 7.87". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 7.48 x 5.91 Inches
See On Amazon #2
uxcell Aluminum Solid Round Rod Lathe Bar 5mm x 500mm for DIY Craft Tool 2 Pcs
Asin: B0986PM76F | Model: a21012200ux0291 | PartNumber: a21012200ux0291
Finish: The Surface Is Smooth, Easy To Shape, No Cracks Formed..
Application: Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship..
Feature: Easy To Machine Aluminum Rods For Milling Or Lathe Work In A Variety Of Applications And Industries..
Material: High-Hardness Aluminum Material, Strong Rust-Resistant, And Corrosion-Resistant, Sturdy And Durable..
Features
- Size: 19.68 Inch / 500mm in length, 13/64 Inch / 5mm in diameter.
- Material: High-hardness aluminum material, strong rust-resistant, and corrosion-resistant, sturdy and durable.
- Finish: The surface is smooth, easy to shape, no cracks formed.
- Feature: Easy to machine aluminum rods for milling or lathe work in a variety of applications and industries.
- Application: Widely used in gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Aluminum 3mm Bore Toothless Timing Belt Pulley with Bearing
Asin: B07125DNMM | Model: a17041300ux0109 | PartNumber: a17041300ux0109
Suits To The Timing Belt Which Is 6Mm In Width..
Package Content: 1 X Timing Belt Pulley.
Widely Used In Milling Machine, Drilling Machine, 3D Printer Or Other Machinery Transmission.
Bore: 3Mm; Total Size: 18*12*8Mm(Max D*Min D*H); Pitch: 2Mm.
Features
- Material: Aluminum
- Bore: 3mm; Total Size: 18*12*8mm(Max D*Min D*H); Pitch: 2mm
- Suits to the timing belt which is 6mm in width.
- Widely used in milling machine, drilling machine, 3D printer or other machinery transmission
- Package Content: 1 x Timing Belt Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #4
uxcell 5pcs Round Steel Metal Rods, 5mm x 150mm High Speed Steel (HSS) Lathe Bar Stock Tool, for Shaft Gear Drill Lathes Boring Machine Turning Miniature DIY Craft, 5pcs
Asin: B07SYY4S1X | Model: a19050800ux0836 | PartNumber: a19050800ux0836
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Round Metal Rods: Diameter: 5mm / 0.2"; length: 150mm / 5.9". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 1pcs Round Steel Metal Rods, 5mm x 200mm High Speed Steel (HSS) Lathe Bar Stock Tool, for Shaft Gear Drill Lathes Boring Machine Turning Miniature DIY Craft
Asin: B07KT3SGX8 | Model: a18103100ux0118 | PartNumber: a18103100ux0118
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Round Metal Rods: Diameter: 5mm / 0.2"; length: 200mm / 7.87". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 7.48 x 5.91 Inches
See On Amazon #6
uxcell Round Steel Rod, 5mm HSS Lathe Bar Stock Tool 100mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 5pcs
Asin: B07KY8MQT6 | Model: a18102400ux0390 | PartNumber: a18102400ux0390
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 5mm / 0.2"; length: 100mm / 3.93". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 1.18 Inches
See On Amazon #7
uxcell Aluminum 20T 5mm Bore 3mm Pitch Toothless Timing Belt Pulley for 15mm Belt
Asin: B0747JGF4P | Model: a17042100ux1278 | PartNumber: a17042100ux1278
Suits To The Timing Belt Which Is 15Mm In Width..
Package Content: 1 X Timing Belt Pulley.
Used Widely In Milling Machine, 3D Printer, Drilling Machine Or Other Machinery Transmission..
Teeth: Toothless; Bore Diameter: 5Mm.
Features
- Material: Aluminum Alloy
- Teeth: Toothless; Bore Diameter: 5mm
- Suits to the timing belt which is 15mm in width.
- Used widely in milling machine, 3D printer, drilling machine or other machinery transmission.
- Package Content: 1 x Timing Belt Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 3.54 x 2.36 Inches
See On Amazon #8
uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L25XD18 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,4pcs
Asin: B08GY88XWT
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 5mm to 5mm; Total Length: 25mm/0.98 inch, Outside Diameter : 18mm/0.7 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Round Steel Rod, 5mm HSS Lathe Bar Stock Tool 150mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 2pcs
Asin: B07SYHNNDF | Model: a19050800ux0835 | PartNumber: a19050800ux0835
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 5mm / 0.2"; length: 150mm / 5.9". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue,2pcs
Asin: B07P5YZC66
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 5mm to 5mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #11
uxcell Aluminum Plum Shaft Coupling 5mm to 5mm Bore L25xD20 Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor Pack of 2
Asin: B0CTH76XKT
The Jaw Coupling Has Three Parts: Two Metallic Hubs And An Elastomer Insert. The Two Fixed Ends Are Made Of Hard Aluminum Alloy And The Middle Is Made Of Polyurethane Elastomer. You Need To Fit The Three Parts Together With The Jaw Lock..
Wear-Resistant, High Hardness And Excellent Response. Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Due To The Limitation In The Shaft Misalignment, Please Check Your Shaft Misalignment. Too Much Angular Or Parallel Misalignment Will Result In Bearing Loads That May Lead To Premature System Wear Or Failure..
Package Content：2 X Flexible Shaft Couplers;Color: Silver, Red;Material: Aluminum;Connection Diameter: 5 To 5Mm/0.2 To 0.2Inch;Total Length: 25Mm/0.98Inch;Outside Diameter : 20Mm/0.79Inch;Attachment:Inner Hex Wrench..
Features
- General-purpose power transmission coupling, also used in motion control applications and rotational power transmissions. Widely used in servo stepped motor, 3D printer, CNC, and encoder motor.
- Package Content 2 x Flexible Shaft Couplers;Color: Silver, Red;Material: Aluminum;Connection Diameter: 5 to 5mm/0.2 to 0.2inch;Total Length: 25mm/0.98inch;Outside Diameter : 20mm/0.79inch;Attachment:Inner Hex Wrench.
- The jaw coupling has three parts: two metallic hubs and an elastomer insert. The two fixed ends are made of hard aluminum alloy and the middle is made of polyurethane elastomer. You need to fit the three parts together with the jaw lock.
- Due to the limitation in the shaft misalignment, please check your shaft misalignment. Too much angular or parallel misalignment will result in bearing loads that may lead to premature system wear or failure.
- Wear-resistant, high hardness and excellent response. Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Aluminum Solid Round Rod Lathe Bar 5mm x 500mm for DIY Craft Tool 5 Pcs
Asin: B0986Z2C3P | Model: a21012200ux0292 | PartNumber: a21012200ux0292
Finish: The Surface Is Smooth, Easy To Shape, No Cracks Formed..
Application: Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship..
Feature: Easy To Machine Aluminum Rods For Milling Or Lathe Work In A Variety Of Applications And Industries..
Material: High-Hardness Aluminum Material, Strong Rust-Resistant, And Corrosion-Resistant, Sturdy And Durable..
Features
- Size: 19.68 Inch / 500mm in length, 13/64 Inch / 5mm in diameter.
- Material: High-hardness aluminum material, strong rust-resistant, and corrosion-resistant, sturdy and durable.
- Finish: The surface is smooth, easy to shape, no cracks formed.
- Feature: Easy to machine aluminum rods for milling or lathe work in a variety of applications and industries.
- Application: Widely used in gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Round Steel Rod, 5mm HSS Lathe Bar Stock Tool 200mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 10pcs
Asin: B07KT3WVGF | Model: a18103100ux0121 | PartNumber: a18103100ux0121
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 5mm / 0.2"; length: 200mm / 7.87". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 7.48 x 5.91 Inches
See On Amazon #14
uxcell 5mm Dia 200mm Length HSS Round Shaft Rod Bar Lathe Tools Gray 5pcs
Asin: B01NBE3MZ6
Package Content: 5Pcs X Lathe Round Rod.
Main Color: Gray.
Overall Size: 5 X 200Mm / 0.2" X 8"(D*L).
Main Material: Hss.
Features
- Weight: 160g; Product Name: Lathe Round Rod
- Main Material: HSS
- Package Content: 5pcs x Lathe Round Rod
- Overall Size: 5 x 200mm / 0.2 x 8(D*L)
- Main Color: Gray
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 7.87 x 1.18 inches
See On Amazon #15
uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L20XD12 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Red
Asin: B07PBY1KZV
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 5mm to 5mm, Total Length: 20mm /0.78 inch, Outside Diameter : 12mm/ 0.47 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon #16
uxcell Shaft Coupling 5mm to 5mm Bore L25xD20 Aluminum Alloy Flexible Coupler Joint for Servo Stepped Motor, Pack of 2
Asin: B0B4J16PW9
The Jaw Coupling Has Three Parts: Two Metallic Hubs And An Elastomer Insert. The Two Fixed Ends Are Made Of Hard Aluminum Alloy And The Middle Is Made Of Polyurethane Elastomer. You Need To Fit The Three Parts Together With The Jaw Lock..
Wear-Resistant, High Hardness And Excellent Response. Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Due To The Limitation In The Shaft Misalignment, Please Check Your Shaft Misalignment. Too Much Angular Or Parallel Misalignment Will Result In Bearing Loads That May Lead To Premature System Wear Or Failure. Please Check The Size Of What You Need..
General-Purpose Power Transmission Coupling, Also Used In Motion Control Applications And Rotational Power Transmissions. Widely Used In Servo Stepped Motor, 3D Printer, Cnc, And Encoder Motor..
Features
- Material: Aluminum Alloy; Fixed Type: Clamp; Fit Screw Size: M3; Connection Diameter: 5mm to 5mm; Total Length: 25mm; Outside Diameter : 20mm
- General-purpose power transmission coupling, also used in motion control applications and rotational power transmissions. Widely used in servo stepped motor, 3D printer, CNC, and encoder motor.
- The jaw coupling has three parts: two metallic hubs and an elastomer insert. The two fixed ends are made of hard aluminum alloy and the middle is made of polyurethane elastomer. You need to fit the three parts together with the jaw lock.
- Due to the limitation in the shaft misalignment, please check your shaft misalignment. Too much angular or parallel misalignment will result in bearing loads that may lead to premature system wear or failure. Please check the size of what you need.
- Wear-resistant, high hardness and excellent response. Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Aluminum 16 Teeth 5mm Bore 2mm Pitch Timing Belt Pulley
Asin: B072JGMK7X | Model: US-SA-AJD-199526 | PartNumber: US-SA-AJD-199526
Suits To The Timing Belt Which Is 6Mm In Width..
Package Content: 1 X Timing Belt Pulley.
20 Contact With The Tooth Side Which Minimizes The Risk Of The Belt Slipping.
Teeth: 16T; Bore: 5Mm; Pitch: 2Mm.
Features
- Material: Aluminum
- Teeth: 16T; Bore: 5mm; Pitch: 2mm
- Suits to the timing belt which is 6mm in width.
- 20 contact with the tooth side which minimizes the risk of the belt slipping
- Package Content: 1 x Timing Belt Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 0.79 x 0.79 Inches
See On Amazon #18
uxcell Aluminum 5mm Bore Toothless 2mm Pitch Timing Belt Pulley with Ball Bearing
Asin: B072M2DVFQ | Model: a17041300ux0113 | PartNumber: a17041300ux0113
Suits To The Timing Belt Which Is 10Mm In Width..
Package Content: 1 X Timing Belt Pulley.
Widely Used In Milling Machine, Drilling Machine, 3D Printer Or Other Machinery Transmission.
Bore: 5Mm; Total Size: 18*18*13Mm(L*W*H); Pitch: 2Mm.
Features
- Material: Aluminum
- Bore: 5mm; Total Size: 18*18*13mm(L*W*H); Pitch: 2mm
- Suits to the timing belt which is 10mm in width.
- Widely used in milling machine, drilling machine, 3D printer or other machinery transmission
- Package Content: 1 x Timing Belt Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 1.18 x 1.18 Inches
See On Amazon #19
uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L20XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Light Blue,2pcs
Asin: B08HCLX12Z
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 5mm to 5mm; Total Length: 20mm /0.79 inch, Outside Diameter : 10mm/ 0.39 inch; with M3 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L25XD20 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,4pcs
Asin: B08H24D7BR
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 5mm to 5mm; Total Length: 25mm/0.98 inch, Outside Diameter: 20mm/0.78 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search