RATTMMOTOR VFD CNC Spindle Motor Kits 2.2KW 220V Water Cooled Spindle Motor 80mm ER20 400Hz 24000RPM+VFD Drive Inverter 3HP+Motor Mount Clamp+14pcs ER20 Collet+80W Water Pump for CNC Router
Asin: B073TRP92V | Model: GDZ80-2.2 | PartNumber: GDZ80-2.2 | Ean: 0785004503176 | UPC: 785004503176
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【1 Year Warranty】We Offer 1 Year Warranty, If You Have Any Questions About The Product, Please Contact The Seller For A Satisfactory Solution..
【80W 220V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 220V 0-50Hz/60Hz. Output：3 Phase 220V 0-400Hz. Under Normal Circumstances, The Parameters Of The Inverter Have Been Set And Can Be Directly Connected For Use. (Or Please Follow The Instructions To Set The Parameters)..
Features
- 2.2KW Spindle Motor : This is a 220V-2.2KW water-cooled 8A 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 220V 0-50Hz/60Hz. Output 3 phase 220V 0-400Hz. Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 80W 220V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- 1 Year Warranty We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 31.50 x 83.46 x 31.50 inches | Weight: 10.21 Pounds
See On Amazon Similar To RATTMMOTOR VFD CNC Spindle Motor
#1
Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with 5mm ER11 Collet Set, CNC 3018 Upgraded Accessories, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine
Asin: B08DTHDSMV | Model: MR775 | PartNumber: MR775 | Ean: 0816550023723 | UPC: 816550023723
Pre-Installed Motor Noise Suppression Pcb Provides Enhanced Performance..
Double Ball Bearing Brush. Cw/Ccw Rotation..
It's Compatible With All 3018 Series Cnc Router. Applied To Lathes, Mills, Car Hoists, Pumps & Conveyors, Etc..
Experience A Quick And Easy Upgrade For Your Genmitsu Desktop Cnc..
Features
- DC: 24V. Speed: 20000/min.
- Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with All 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
- Double ball bearing brush. CW/CCW rotation.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 1.03 pounds
See On Amazon #2
SZCY LLC AC 220V/2.2KW Variable Frequency Drive, 10A VFD Inverter Frequency Converter for Spindle Motor Speed Control (Single-Phase Input, 3 Phase Output)
Asin: B0811BXHBQ | Model: 220V/2.2KW | PartNumber: 220V/2.2KW | Ean: 0732376471671 | UPC: 732376471671
Spacing 2.54Mm Bar Connector, 5-Pin Plug. Dc Cooling Fan Low Noise, Large Air Volume..
The Operator Panel Can Be Moved Out And Extended By 2M, 1.5M, 1M, 30Cm. 1 Year Replace Or Refund!!!.
The Machine Is Screwed To Ensure The Safety And Reliability Of The Use. Three Anti-Paint Protection Lines, Improve And Extend The Life Of The Fuselage..
Application: Spindle Motor, Drill Press, Cnc, Hvac, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-Phase Motor And Other Machines!.
Features
- Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase.
- Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!
- Spacing 2.54mm bar connector, 5-pin plug. DC cooling fan low noise, large air volume.
- The machine is screwed to ensure the safety and reliability of the use. Three anti-paint protection lines, improve and extend the life of the fuselage.
- The operator panel can be moved out and extended by 2M, 1.5M, 1M, 30CM. 1 Year replace or refund!!!
- See more on Amazon...
Brand: SZCY LLC | Manufacturer: SZCY LLC
Weight: 3.09 Pounds
See On Amazon #3
RATTMMOTOR 2.2KW Water Cooled Spindle Kits 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter 3HP Variable Frequency Drive+Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine
Asin: B0756WNP1J | Ean: 0785004503381 | UPC: 785004503381
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 110V 0-50Hz/60Hz. Output：3 Phase 110V 0-400Hz.Under Normal Circumstances, The Parameters Of The Inverter Have Been Set And Can Be Directly Connected For Use. (Or Please Follow The Instructions To Set The Parameters)..
Features
- 2.2KW Spindle Motor : This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 110V 0-50Hz/60Hz. Output 3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 80W 110V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 0.01 x 0.00 inches | Weight: 23.19 Pounds
See On Amazon #4
Mollom VFD 220V 7.5KW 32A 10HP Single or Three Phase Input to 3 Phase 0-3000 Hz Output Variable Frequency Drive Vector Control Inverter for Spindle Motor CNC Speed Control
Asin: B09MHF44LM | Model: 7.5KW 10HP 220V | PartNumber: 7.5KW 10HP 220V | Ean: 6973665990228
【Smart Digital Display】 Adopting User-Friendly Keyboard Design & Reasonable Layout, Easy To Operate; Digital Display, Intuitive And Clear. The Detachable Design Is Convenient For Remote Control..
【Importent Note】 This Vfd Surpport External Resistor. If Your Motor Is Heavy Load, Pls Choose A Higher Power Level Vfd Or Contact Sales For Model Selection Suggestion.🔺🔺The Working Environment Is Relatively Humid, With Water Mist, Water Droplets Or Metal Objects Falling In, Which Will Cause A Short Circuit..
【Application Motor】Cnc Router, Cnc Machine, Milling Machine, Drilling Machine, Wingding Machine, Mixer, Extruder, Slitter, Winder, Compressor, Ventilator, Pump, Grinder, Conveyor, Elevator, Centrifuger And Other Speed Control Machines..
【Feature】Rich Of Digital And Analogy Control Terminals For Versitile Control ，Rs485 Communication Port, Adopting Standard International Modbus Main Circuit Control.With Extremely Strong Anti-Jamming Capability, Safe For You To Use..
Features
- High Performance Power: 7.5kw; Input voltage: AC 220V( 15%); Output voltage: AC 220V; Maximum output current:32A; Input frequency: 50/60 Hz; Output frequency: 0-3000 Hz; Input phase: Both Support Single or Three phase; Output phase: three-phase.VFD Dimension: 5.9 x 7.3 x 10.2 inch (L x W x H).
- Feature Rich of digital and analogy control terminals for versitile control RS485 communication port, adopting standard international MODBUS main circuit control.With extremely strong anti-jamming capability, safe for you to use.
- Smart Digital Display Adopting user-friendly keyboard design & reasonable layout, easy to operate; digital display, intuitive and clear. The detachable design is convenient for remote control.
- Application Motor CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
- Importent Note This VFD surpport external resistor. If your motor is heavy load, pls choose a higher power level VFD or contact sales for model selection suggestion. The working environment is relatively humid, with water mist, water droplets or metal objects falling in, which will cause a short circuit.
- See more on Amazon...
Brand: Mollom | Manufacturer: Mollom
Dimensions: 7.20 x 9.40 x 5.70 inches | Weight: 6.70 pounds
See On Amazon #5
RATTMMOTOR DC Brushless Spindle Motor Kit, 500W 48V Spindle Motor Air Cooled ER11, 12000RPM, 0.6N.m, 55MM+BLDC Driver Motor Speed Controller 600W Spindle Power Supply+Clamp Mount for CNC Router
Asin: B09X2Y63XQ | Model: 500WBLDC-4 | PartNumber: 500WBLDC-4
【Spindle Motor Drvier Parameters】Rated Voltage: 20-50Vdc; Rated Current: 10A; Limiting Current: 15A; Support Speed: Support Speed Above 20000Rpm, The Specific Speed Depends On The Motor Itself And The Load..
【Advantages-1】The Brush Is Removed, And There Is No Electric Spark Generated When The Brushed Motor Is Running, Which Greatly Reduces The Interference Of The Electric Spark To The Remote Control Radio Equipment..
【Dc Switching Power Supply Parameters】Input Voltage: 110V / 220V Ac; Current: 0-12.5A; Input Frequency: 50/60Hz; Power: 600W; Output Voltage: Dc 48V; Size; 215*115*50Mm..
【Spindle Motor Drvier Features】Compatible With Square Wave With And Without Hall, With Potentiometer Speed Regulation Function, External 10V Voltage Speed Regulation Function, Switch Function, Speed Output Function, Alarm Output Function, Forward And Reverse Function, Etc., And Has A Protective Shell..
Features
- Air Cooled Spindle Power: 500W; Voltage: 48VDC; Speed: 12000r/min; Torque 0.6NM; Diameter: 55mm.Radial runout off :about 0.01-0.03mm;Insulation resistance: > 2 megohms; Dielectric strength of insulation: 400V.
- Spindle Motor Drvier Features Compatible with square wave with and without Hall, with potentiometer speed regulation function, external 10V voltage speed regulation function, switch function, speed output function, alarm output function, forward and reverse function, etc., and has a protective shell.
- Spindle Motor Drvier Parameters Rated voltage: 20-50VDC; Rated current: 10A; Limiting current: 15A; Support speed: support speed above 20000RPM, the specific speed depends on the motor itself and the load.
- DC Switching Power Supply Parameters Input voltage: 110V / 220V AC; Current: 0-12.5A; Input frequency: 50/60Hz; Power: 600W; output Voltage: DC 48V; Size; 215*115*50mm.
- Advantages-1 The brush is removed, and there is no electric spark generated when the brushed motor is running, which greatly reduces the interference of the electric spark to the remote control radio equipment.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 22.83 x 74.80 x 22.44 inches | Weight: 5.95 Pounds
See On Amazon #6
Huanyang Vector VFD Variable Frequency Drive,Single to 3 Phase,7.5kW 10HP 220V AC 34A for Motor Speed Control,GT Series
Asin: B077KSN4C5 | Model: GT-220V-7.5KW | PartNumber: GT-220V-7.5KW | Ean: 0724509858367 | UPC: 724509858367
【Feature-Rich】Support External Braking Resistor And Potentiometer .Supports Mcah3 Function And Rs-485 Communication.Supports Remote Potentiometer Speed Control And Remote Switch Start/Stop.
【Warranty】: 1 Year Replace .If There Is An Error Code In The Product And You Do Not Know How To Operate, Please Contact The Seller.
【Good Noise Control】The Product Has The Advantages Of Low Noise And Low Electromagnetic Interference, Which Are Achieved By The Excellent Pmw Control Technology And Component Compatibility Design. There Is Enough Space For Cooling Between Each Component, And The Product Casing Is Designed With Multiple Holes, The Above Features Can Make This Vfd Have A Longer Service Life..
【Advantage Feature】With Better Performance And Stability.Adopt Dsp Vector Control To Enable Motor To Achieve High Torque In Low Speed Rotation To Increase Motor Working Efficiency.
Features
- Connection way Input 220-240V AC 1 or 3phase. for single-phase input, just connect the input wire to the "R" and "S" terminals
- Advantage Feature With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency
- Feature-rich Support external braking resistor and potentiometer .supports mcah3 function and RS-485 communication.Supports remote potentiometer speed control and remote switch start/stop
- Good Noise Control The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
- Warranty : 1 Year replace .If there is an error code in the product and you do not know how to operate, please contact the seller
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Dimensions: 5.90 x 8.70 x 6.70 Inches | Weight: 6.61 Pounds
Warranty: 【Warranty】: 1 Year replace .If there is an error code in the product and you do not know how to operate, please contact the seller
See On Amazon #7
RATTMMOTOR CNC Spindle Motor Water Cooled 2.2KW 220V Spindle Motor ER20 Collet 80mm Diameter 8A 400HZ 24000RPM for CNC Router Engraver Milling Machine
Asin: B071VW5X2W | Model: GDZ-2.2-220V | PartNumber: GDZ-2.2-220V | Ean: 0709046759773 | UPC: 709046759773
✅【Speed Of The Spindle Motor】0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counterclockwise..
✅【1 Year Warranty】We Offer 1 Year Warranty, If You Have Any Questions About The Product, Please Contact The Seller For A Satisfactory Solution..
✅【Advantages Of The Spindle】The Design Of The Dust-Proof Cover On The Front Of The Spindle And The Use Of Stainless Steel Body Can Effectively Prevent Dust, Water And Rust..
✅ Iso9001 Quality Certifications Which Means This Item Is The Top Quality Item. In Extremely High Speed Working Environment, Ordinary Bearing Can Not Ensure This High Rotate Speed For Using For Long Time..
✅【Simple Introduction】This Is A 220V-2.2Kw Water-Cooled 15A Φ 80X213mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.003--0.005 Accuracy And Runout Off Is Less Than 0.01Mm. It Is Mainly Suitable For Non-Metallic Engraving,Such As Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine..
Features
- How to Connect The Spindle Motor The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 is the ground wire, no wiring is required.
- Simple Introduction This is a 220V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is less than 0.01mm. It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine.
- Speed of The Spindle Motor 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- ISO9001 quality certifications which means this item is the top quality item. In extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time.
- 1 Year Warranty We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
- Advantages of The Spindle The design of the dust-proof cover on the front of the spindle and the use of stainless steel body can effectively prevent dust, water and rust.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Changsheng
Dimensions: 0.00 x 0.01 x 0.00 inches | Weight: 12.35 pounds
Warranty: 1 year warranty
See On Amazon #8
CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
Asin: B01LNBOCDA | Model: 500W | PartNumber: 500W | Ean: 0713839365553 | UPC: 713839365553
🛠️【Speed Power Switch】- Input Voltage: Ac110v/220V, 50/60Hz. Output Current Peak: 6A. Output Voltage: Dc0-100V. Please Install In The Place That Is Draughty, No Dramatic Impact, No Vibration, No Explosion Hazard Medium, No Conductive Metal Particle..
🛠️【Er11 Collet Chuck】- 13Pcs Er11 Collet Set Gripping Range: 1Mm To 7Mm(1Mm,1.5Mm,2Mm,2.5Mm,3Mm,3.5Mm,4Mm,4.5Mm,5Mm,5.5Mm,6Mm,6.5Mm,7Mm). Run-Out Tolerance 0.01Mm. For Cnc Milling Lathe Tool & Work Holding Engraving Machine..
🛠️【 52Mm Mount Bracket】- Made Of High Quality Cast Aluminum, This Spindle Motor Bracket Clamp Is Strong And Sturdy. Diameter: 52Mm, Chuck Portion Length: 45Mm, Chuck Portion Diameter: 16Mm..
🛠️【500W Cnc Spindle Motor】- Operating Voltage: 100Vdc, Power: 500W, Input: Ac110v, Speed: Up To Idle Up To 12,000 Rev / Min, Torque: 5000G/Cm. Insulation Resistance:> 2 Megohms, Dielectric Strength: 400V. Motor Length: 200Mm, High Precision Spindle Run Out 0.01-0.03..
Features
- CNC Spindle kit 500W - 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).
- 500W CNC Spindle motor - Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
- Speed Power Switch - Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
- 52mm Mount Bracket - Made of high quality cast aluminum, this spindle motor bracket clamp is strong and Sturdy. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
- ER11 Collet Chuck - 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: Mysweety
Dimensions: 7.48 x 11.42 x 6.69 inches
See On Amazon #9
RATTMMOTOR CNC Controller Kit, 4 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
Asin: B09MRXXZZR | Model: 4 axis | PartNumber: 4 axis | Ean: 0754193834842 | UPC: 754193834842
【Low Noise/High Torque Hybrid Stepper Motor】23Hs8430 2-Phase Stepper Motor With A Shaft Diameter Of 8Mm, A Current Of 3A And An Angle Of 1.8°, Is Made Of Durable Metal On The Outside, And The Perfect Combination Of Rubber And Rotor Fills Up The Inner Space And Stabilizes The Overall Structure Of The Motor. The Coils Are Made Of Pure Copper Enameled Wire And The Torque Is Up To 270Oz-In (180N.Cm/18Kg-Cm). The Motor Runs Quietly And Doesn't Cause The Generator To Become Too Hot Over A Long Time..
【Stable Output 24V Dc Power Supply】Over-Current, Over-Voltage And Overload Protection, Power Supply Stable Power Supply, Electrical Energy Conversion Rate Of Up To 90%, Higher Efficiency. Together With The Heat Dissipation Fan Design, Shell Hollow Design, Heat Dissipation Ability Faster And Stronger, More Durable Performance..
【Usb Interface, Drive-Free Design 4-Axis Linkage Control Card】Output Pulse Frequency Of 100Khz, Using The Minimum Error Interpolation Algorithm, High Processing Accuracy. Supports Up To 4 Axes Of Linkage Control, Of Which The 4Th Axis Can Be Set As The Slave Axis. The Control Card Can Be Connected To Pc-Compatible Computers Such As Laptops, Desktops, Tablets And Other Computers With A Usb Interface. As Long As Mach3 Is Running, The Control Card Can Be Used Without Installing Any Drivers..
【Multi-Function Control Card】General-Purpose Opto-Couplers Isolation Input : Can Support The Limit Switch, Emergency Stop Switch, Auto Tool Zero, Home Switch Etc, Electronic Handwheel; Have 0-10V Signal Output , You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps Or Other Device..
【Support Forward And Reverse Control Stepper Motor Driver】42/57 Tb6600 Stepper Motor Driver With Input Voltage Anti-Reverse Connection And Overheat/Overcurrent Short Circuit Protection, Equipped With Red Warning Light. Through The 3-Digit Dip Switch, You Can Choose 7 Subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) And 8 Subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) Current Control..
【Control Card And Tb6600 Driver Wiring (X-Axis As An Example) 】Driver's "Pul+" Connects To Control Card's Xp+ Pin , Driver's "Dir+" Connects To Control Card's Xd+ Pin , Driver's " Pul- " Pin And " Dir- " Connection To Usb Mach3 Control Card's " 5V ""..
Features
- Motor and TB6600 Driver wiring Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- Control Card and TB6600 Driver wiring (X-axis as an example) Driver's Pul+ connects to control card's XP+ pin , Driver's DIR+ connects to control card's XD+ pin , Driver's PUL- pin and DIR- connection to USB Mach3 control card's 5V .
- Low Noise/High Torque Hybrid Stepper Motor 23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8 , is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- Support Forward and Reverse Control Stepper Motor Driver 42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
- USB Interface, Drive-free Design 4-Axis Linkage Control Card Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- Multi-function control card General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch etc, electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
- Stable output 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.93 x 8.46 x 4.49 Inches
See On Amazon #10
HY HUANYANG Water Cooled CNC Spindle Motor 220V 2.2KW 24000RPM 400hz 80mm ER20 for Engraving Machine
Asin: B077BYVT56 | Ean: 0724509858176 | UPC: 724509858176
【Low Noise】The Dynamic Balance Technology Can Effectively Reduce The Noise During Use. The Scientifically Designed Water Circulation System Has A Better Heat Dissipation Effect To Ensure Smooth Operation..
【Warranty Assurance】Half A Year Warranty,You Can Contact Us If You Have Any Problems, We Will Carry Out After-Sales Service For You.
【Characteristic Advantage】Shell Is Cooled By Liquid Cycle To Reduce The Heat Rise Caused By High-Speed Rotation.Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process,Adopt Precision Steel Ball Holder To Ensure The Rotation Precision Of The Spindle In High Speed Grinding,.
【High Precision Collet】Er20 Standard Collet, The Collet Of The Cnc Spindle Is Quenched With Manganese Steel, And The Runout Is Less Than 0.005 Mm, Which Has High Precision And Is Not Easy To Break The Knife, Increasing The Stability Of The Working Process. Dynamic Balance Technology Can Effectively Reduce Noise During Use..
Features
- Powerful Bearings Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- High Precision Collet ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Low Noise The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Characteristic Advantage Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
- WARRANTY ASSURANCE Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Weight: 12.21 Pounds
See On Amazon #11
RATTMMOTOR 1.5KW Water Cooled Spindle Motor Kit 110V CNC Spindle Motor 80mm+VFD Drive Inverter Single to 3 Phase+80mm Spindle Mount+80W Water Pump with Pipe+14pcs ER11 Collet for CNC Machine
Asin: B09XX6CKKH
【Vfd Inverter Parameters】The 1.5Kw Variable Frequency Drive Inverter Has Five-Digits Display And Status Indicator Lamp Display Frequency, Current, Revolution, Voltage, Counter, Temperature, Foward Or Reverse Running, Fault, Ect. Input Voltage: 110V(+/-15%) ,Output Voltage 110V, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 Phase, Output Phase: 3 Phase..
【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V/50Hz. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【1.5Kw Spindle Motor】: ①This Is A 110V-1.5Kw Water-Cooled 10A Φ 80X188mm Spindle Motor Come With A Er11 Nut And Collet, And Equipped With A 80Mm Spindle Mount. Frequency Is 400Hz, 0.003--0.005 Accuracy And Runout Off Is Less Than 0.01Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Main Shaft Cannot Only Rotate Clockwise Or Counter Clockwise..
Features
- Package Include : 1 x 1.5KW Water Cooled Spindle Motor ER11 1 x 1.5KW VFD 110V 1 x 80mm Spindle Motor Mount 1 x 80W Water Pump 1 x 5m Pipe 14 x ER11 Collet 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 3.175mm
- 1.5KW Spindle Motor : This is a 110V-1.5KW water-cooled 10A 80x188mm spindle motor come with a ER11 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counter clockwise.
- VFD Inverter Parameters The 1.5KW variable frequency drive inverter has five-digits display and status indicator lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect. Input Voltage: 110V(+/-15%) ,Output Voltage 110V, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- 80W 110V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V/50HZ. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 0.01 x 3.15 inches | Weight: 17.86 Pounds
See On Amazon #12
RATTMMOTOR 500W Spindle Motor CNC Air Cooled Spindle Motor ER11 12-100VDC 0.5NM 12000RPM + 52mm Spindle Motor Mount Clamp for CNC Router Milling Machine
Asin: B09PR6QTK3 | Model: RTM5.2 | PartNumber: RTM5.2
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
52Mm Diameter Spindle Motor Mount,Compared With The Aluminium Profile Fixture,The Accuracy Is Much Higher , And It Is Hard To Deform..
Can Be Used For Solid Wood Pcb Engraving, Drilling, Etc..
Idling Speed: 2000-12000R/Min; Torque：0.5Nm; Chuck Part Length: 45Mm; Diameter: 52Mm; Insulation Resistance: >2 Megohms; Insulation Dielectric Strength: 400V; Spindle Radial Runout 0.01-0.03 High Precision..
Features
- Power: 500W, Air cooling method, working voltage: 12-100VDC.
- Idling Speed: 2000-12000r/min; Torque 0.5NM; Chuck part length: 45MM; Diameter: 52mm; Insulation resistance: >2 megohms; Insulation dielectric strength: 400V; Spindle radial runout 0.01-0.03 high precision.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- Can be used for solid wood PCB engraving, drilling, etc.
- 52mm Diameter spindle motor mount,compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.20 x 0.01 x 0.00 inches | Weight: 2.54 pounds
See On Amazon #13
RATTMMOTOR Variable Frequency Drive 220V 3KW 4HP VFD Inverter Frequency Converter 400Hz 13A Single Phase Input, 3 Phase Output Cable for CNC Water-Cooled Air-Cooled Spindle Motor Speed Control
Asin: B07452BX6S | Ean: 0785004503282 | UPC: 785004503282
【Input/Output Terminals】- 6 Multi-Function Input Terminals Can Implement 8 Speed Control, Program Operation, 4 Segment Reduction Switching, Up/Down Functions, Counter, External Emergency Stop Function. There Are 5 Multi-Function Output Terminals For Displaying Running, Zero Speed, Counter, External Abnormity, Program Operation And Other Information And Warnings..
【Installation/Use Environment】In Order To Make The Cooling Effect, The Frequency Converter Must Be Installed Vertically And Ensure That The Air Is Flowing Smoothly. Before Installing And Using The Product, Please Read The Instruction Manual (Included In The Package) Of The Inverter Carefully To Give Full Play To Its Functions And Ensure Safety..
【Multi-Protection Functions】Including Overload Protection, Fuse Broken-Motor Stops Protection, Over-Voltage / Low-Voltage Protection, Restarted By Frequency Track After Instantaneous Stop, Anti-Stall During Acceleration/Deceleration Operation, Electronic Circuit Protection. And Many Other Protection Functions, Such As Over-Heat Protection, Restriction Of Reverse Running, Direct Start After Power On, Fault Reset, Parameter Lock Pid, One-Drive-More, Ect..
【General Control】- In Addition To 4 Segment Reduction Time (0.1-6500 Seconds) Can Be Arbitrarily Selected, Not Only Can Set A V / F Curve, But Also Set Torque, Up To 10.0% Start Torque Can Reach 150%. There Are Also Other Functions, Like An Automatic Voltage Regulator (Avr), Deceleration Stop Or Free Stop, Dc Brake, Automatic Reset Reset, Frequency Tracking, Plc Program Control, Transverse Control, Carrier Adjustable By Max 20Khz, Ect..
Features
- Technical Parameters - Control Model: SPWN. Power: 3KW. Input 1 or 3 phase 220V 0-50Hz/60Hz. Output 3phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 40 . Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
- General Control - In addition to 4 segment reduction time (0.1-6500 seconds) can be arbitrarily selected, not only can set a V / F curve, but also set torque, up to 10.0% start torque can reach 150%. There are also other functions, like an automatic voltage regulator (AVR), deceleration stop or free stop, DC brake, automatic reset reset, frequency tracking, PLC program control, transverse control, carrier adjustable by max 20kHz, ect.
- Input/Output Terminals - 6 Multi-function input terminals can implement 8 speed control, program operation, 4 segment reduction switching, UP/DOWN functions, counter, external emergency stop function. There are 5 multi-function output terminals for displaying running, zero speed, counter, external abnormity, program operation and other information and warnings.
- Multi-Protection Functions Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
- Installation/use environment In order to make the cooling effect, the frequency converter must be installed vertically and ensure that the air is flowing smoothly. Before installing and using the product, please read the instruction manual (included in the package) of the inverter carefully to give full play to its functions and ensure safety.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Huangyang
Weight: 4.13 Pounds
See On Amazon #14
RATTMMOTOR CNC Spindle Motor Speed Controller 6A Spindle Motor Speed Power Converter Compatible with 500W DC Air Cooled Spindle Motor
Asin: B09PR8HC7G | Model: RTM5.1 | PartNumber: RTM5.1
Current Limit: 6A.
Adapted Spindle Motor: 500W.
Features
- Input voltage: AC110-AC220V 10%, 50/60Hz
- Adapted spindle motor: 500W
- Current limit: 6A
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #15
RATTMMOTOR DC Motor CNC 775 Spindle Motor 100W 12-24VDC 20000RMP + ER11 Collet for DIY Mini CNC Router 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro Engraving Router Milling Machine
Asin: B08FD2PJHK | Model: CNC-775 | PartNumber: CNC-775 | Ean: 0619191686209 | UPC: 619191686209
Large Torque, Low Friction And Stable Operation..
Package Include: 1 ×775 Spindle Motor Er11+ 2×Wrench + 1×Cables.
Mainly For Diy Mini Cnc Wood Router Machine, Such As Cnc 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418.
Double Ball Bearings Have Low Noise..
Features
- Front and rear double ball bearings, universal DC 12V-24V voltage.
- Double ball bearings have low noise.
- Large torque, low friction and stable operation.
- Mainly for DIY MINI CNC wood router machine, such as CNC 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418
- Package include: 1 775 Spindle motor ER11+ 2 wrench + 1 cables
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.75 x 0.00 x 0.00 inches | Weight: 0.99 pounds
See On Amazon #16
RATTMMOTOR CNC Spindle Motor 1.5KW Air Cooled Spindle Motor 110V ER16 Collet 80mm Diameter 15A 400HZ 24000RPM for CNC Router Engraving Milling Machine
Asin: B0B4MWGX99 | Model: GDZ-80F-1.5 | PartNumber: GDZ-80F-1.5
【Rotation Accuracy】- The Rotor Has High Precision Because Of Precision Steel Ball Retainer, And High Temperature Resistant Grease Lubrication Method, All Of Which Ensures The Rotation Accuracy And Low Noise Of The Spindle During High-Speed Grinding..
【Main Application 】This Spindle Motor Is Mainly Designed For Cnc Router Machine And Usually Used With Vfd Inverter, Engraving Materials Such As Wood, Aluminum, Glass, Pvc Industry ,Ect..
【Material & Configure】- The Spindle Has Fine Workmanship，Stainless Steel Body And Dustproof Design Make The Spindle More Durable..
【Cooling Method】- Good Heat Dissipation Effect By Adopting Fan Cooling Method, Without Connecting To Water Pump And Water Pipe, It's More Convenient And Trouble-Saving And Can Be Used Directly By Connecting With The Inverter..
Features
- Basic Parameters - Diameter: 80 mm x Length: 195 mm, Power: 1.5KW, Voltage: 110VAC, Current: 15A, Frequency: 0-400Hz, Collet Size: ER16, Runout off: Less than 0.01mm, Precision Tapered Bore: Less than 0.005mm, Speed: 0-24000rpm (Please keep the speed of spindle rotation above 9000 rpm.)
- Cooling Method - Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, it's more convenient and trouble-saving and can be used directly by connecting with the inverter.
- Rotation Accuracy - The rotor has high precision because of precision steel ball retainer, and high temperature resistant grease lubrication method, all of which ensures the rotation accuracy and low noise of the spindle during high-speed grinding.
- Material & Configure - The spindle has fine workmanship stainless steel body and dustproof design make the spindle more durable.
- Main Application This spindle motor is mainly designed for CNC router machine and usually used with VFD Inverter, engraving materials such as wood, aluminum, glass, PVC industry ,ect.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #17
RATTMMOTOR DC Motor CNC 997 Spindle Motor 400W 12-48VDC 0.99N.m 5000-20000RMP Double Ball Bearing, Diameter 52mm Spindle Motor for DIY Mini CNC Router Lathes Milling Engraver Polishing Machine
Asin: B0CB2R7VGG | Ean: 0754193411661 | UPC: 754193411661
【High Power, High Torque】High Power Spindle Motor With The Beginning Of 9, The Rated Power Is 400W, The Torque Is Up To 15Kg/Cm, The Torque Is 0.99N.M, The Torque Is Strong, Far More Than 7 Motors, It Is The Special Motor For Diy Drilling, Milling, Cutting And Grinding..
【Double Ball Bearings, Strong Magnetism And Low Noise】Front And Rear Ball Bearings Are Highly Efficient And Quiet. With Its Own Cooling Fan, Can Efficiently Solve The Problem Of Heat Dissipation. 7-Stage Rotor, Pure Copper Coil, High Magnetic Force, High Efficiency, Long-Lasting And Durable..
【5000-2000Rpm】Rated Current 1.85A, Rated Voltage 12-48V Dc, Motor Speed Up To 20,000Rpm, 12V/5000Rpm, 24V/10,000Rpm, 36V/15,000Rpm, 48V/20,000Rpm, Supports Forward And Reverse, High Speed, Strong Momentum..
【Motor Size】Motor Length Is 120Mm/4.72Inch, Diameter Is 54Mm/2.13Inch, Shaft Diameter Is 6.35Mm/0.25Inch, Output Shaft Length Is 20Mm/0.79Inch, Motor Weight Is 760G/1.68 Ib..
Features
- Applicable Fields Cutting machines, belt sanders, lathes, milling machines, bench drills, hand drills, polishing machines, bead machines, lawn mowers, wire saws, band saws, electric grinders, engraving machines and other miniature machines.
- Motor size Motor length is 120mm/4.72inch, diameter is 54mm/2.13inch, shaft diameter is 6.35mm/0.25inch, output shaft length is 20mm/0.79inch, motor weight is 760g/1.68 Ib.
- High power, high torque High power spindle motor with the beginning of 9, the rated power is 400W, the torque is up to 15KG/CM, the torque is 0.99N.m, the torque is strong, far more than 7 motors, it is the special motor for DIY drilling, milling, cutting and grinding.
- 5000-2000RPM Rated current 1.85A, rated voltage 12-48V DC, motor speed up to 20,000rpm, 12V/5000rpm, 24V/10,000rpm, 36V/15,000rpm, 48V/20,000rpm, supports forward and reverse, high speed, strong momentum.
- Double ball bearings, strong magnetism and low noise Front and rear ball bearings are highly efficient and quiet. With its own cooling fan, can efficiently solve the problem of heat dissipation. 7-stage rotor, pure copper coil, high magnetic force, high efficiency, long-lasting and durable.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 4.72 x 2.05 x 2.05 inches
See On Amazon #18
CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine
Asin: B0BDRNTWJZ | Model: ytx-1.5kw-65-air | PartNumber: ytx-1.5kw-65-air
【Easy And Fast To Assemble 】-We Offer Pre-Soldered Aviation Wire , You Will Take 2 Minutes To Connect Spindle Motor With Vfd..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【Wide Application】-Kinds Of Engraving And Drilling Material :Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Spindle Advantage 】-It Made Less Noise When Working, Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Average Spindle Motor..
Features
- BASIC INFORMATION -This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm ),Diameter 65mm Voltage: 110V ,Power:1.5KW, Frequency: 400 Hz, Current: 8A , Speed: 5000-24000 RPM, Runout off: less than 0.005 mm. Weight: 2.7kg(5.96lbs)
- SPINDLE ADVANTAGE -It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond average spindle motor.
- EASY AND FAST TO ASSEMBLE -We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD.
- WIDE APPLICATION -Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #19
Mophorn CNC Spindle Motor CNC Spindle Kits Water Cooled Spindle Motor For CNC Router Engraving Milling Machine (2.2KW)
Asin: B071JLP1PQ | Ean: 0719034814889 | UPC: 719034814889
Powerful Bearing: The Water Cooled Spindle Motor Adopts Imported Bearings With High Accuracy, Precision, And Durability. Significantly Improve The Hardness And Anti-Rust Performance..
Fine Workmanship: The Body Of The Cnc Router Spindle Is Made Of High-Quality Stainless Steel, Equipped With A Pure Copper Rotor. The Upgraded Version Of The Aviation Plug Can Ensure The Stability And Security Of The Input Power, And The Dust Cover Prevents Dust From Entering The Body..
Low Noise & Heat Dissipation: The Dynamic Balance Technology Can Effectively Reduce The Noise During Use. The Scientifically Designed Water Circulation System Has A Better Heat Dissipation Effect To Ensure Smooth Operation..
Er20 Standard Collet: The Collet Of The Cnc Spindle Is Quenched With Manganese Steel, And The Runout Is Less Than 0.005 Mm, Which Has High Precision And Is Not Easy To Break The Knife, Increasing The Stability Of The Working Process. Dynamic Balance Technology Can Effectively Reduce Noise During Use..
Features
- Technical Parameters: Spec: 3.15 x 8.5 in (Diameter: 8 cm x Length: 21.5 cm); Power: 2.2 KW; Voltage: 220V~250V; Current: 8A; Collet Size: ER20; Bearings: 3 bearings; Frequency: 400 Hz; Speed: 8000-24000 R/min; Runout off: less than 0.005 mm. The CNC spindle motor is mainly used for engraving machine or used with frequency converter.
- ER20 Standard Collet: The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Powerful Bearing: The water cooled spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Fine Workmanship: The body of the CNC router spindle is made of high-quality stainless steel, equipped with a pure copper rotor. The upgraded version of the aviation plug can ensure the stability and security of the input power, and the dust cover prevents dust from entering the body.
- See more on Amazon...
Brand: Mophorn | Manufacturer: Mophorn
Dimensions: 10.00 x 3.00 x 3.00 inches | Weight: 11.00 Pounds
See On Amazon #20
RATTMMOTOR 1.5KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive Spindle Motor Controller Converter 0-1000Hz + Extension Cable for CNC Router Milling Engraving Machine
Asin: B09WJV3PM7 | Model: RTM100-110V1.5 | PartNumber: RTM100-110V1.5
Input Phase: 1 Phase; Output Phase: 3 Phase..
Suitable For 0.8Kw Or 1.5Kw 110V Cnc Air-Cooled Water-Cooled Spindle Motor..
Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz..
Features
- Input Voltage: 110V(+/-15%); Output Voltage: 110VAC.
- Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz.
- Input Phase: 1 Phase; Output Phase: 3 Phase.
- Suitable for 0.8KW or 1.5KW 110V CNC air-cooled water-cooled spindle motor.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 5.91 x 0.00 x 4.65 Inches
See On Amazon
Looking For Something Else?
Search