CDHPOWER Motor Mount Block and 8mm Studs Set for 66cc/80cc/YD100 Gas Engine Motr Kit-Motorized Bike
Asin: B074TC29DL | Model: CDHCB017-5-5 | PartNumber: CDHCB017-5-5 | Ean: 0754047486357 | UPC: 754047486357
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Front Motor Mount Bolts 8Mm And Rear Mount Bolts 8Mm For Yd100/66Cc/80Cc Gas Engine Motor Kit.
Buyers Should Know How To Tap Out The Original Holes; Any Questions,Please Contact Us Firstly !We Can Help You Solve The Problem Until You Are Satisfied..
Package: One Set Of Front Mount Block,Studs 8Mm For Front And Rear ,Clamp,Washer And Nuts Are Included; One Set Of Rear Clamp, Studs 8Mm,Washer And Nuts Are Included Too; Thread Size: M8*1.25.
Fitting On Engine With Front Mount Mouth 40Mm(Refer To The Third Picture With Sizes In Detail ).
Features
- Please measure the size to confirm it fit your bike before you order .Pls recheck your engine front mount mouth,rear and front mount bolts before buy,ensure it is 40mm mouth and 8mm bolts;(engine with 32mm front mouth and stock engine with 6mm front and rear bolts DO NOT compatible with it)
- Fitting on engine with front mount mouth 40mm(refer to the third picture with sizes in detail )
- Front motor Mount bolts 8mm and rear mount bolts 8mm for YD100/66cc/80cc gas engine motor kit
- Package: one set of front mount block,studs 8mm for front and rear ,clamp,washer and nuts are included; one set of rear clamp, studs 8mm,washer and nuts are included too; Thread size: M8*1.25
- Buyers should know how to tap out the original holes; Any questions,please contact us firstly !we can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
Weight: 0.53 pounds
See On Amazon Similar To CDHPOWER Motor Mount Block and
#1
XtremeAmazing Pack of 2 Engine Swap Weld-in Motor Mounts Compatible with Chevy Small and Big Block SBC BBC 91018040
Asin: B08NDTZ9MK | Model: 91018040 | PartNumber: 91018040
Compatible With Universal Engine Mount Fits Sbc, Bbc, And 4.3L V6 Engines.
Package Contents: 2X Weld-In Motor Mount.
Placement On Vehicle: Front, Left, Lower, Rear, Right, Upper.
Features
- Replaces Part Number: 91018040
- Placement on Vehicle: Front, Left, Lower, Rear, Right, Upper
- Compatible with Universal engine mount fits SBC, BBC, and 4.3L V6 engines
- Package Contents: 2x Weld-In Motor Mount
- See more on Amazon...
Brand: XtremeAmazing | Manufacturer: XtremeAmazing
See On Amazon #2
LOSTAR Pair(2) 3474 Engine Motor Mounts SBC BBC for 383/400/396/427/454 Chevy Engines
Asin: B09XTL979J | Model: LSOT00633 | PartNumber: LSOT00633 | Ean: 0738712256834 | UPC: 738712256834
✅Package Includes: 2 X Engine Motor Mounts.
✅1 Year Unlimited-Mileage Quality Guarantee.
✅Replacement Oem ( Original Equipment Part) Number: 3474*2.
✅Compatibility: For 283 305 327 350 383 400 396 427 454 Che-Vy Engines.
Features
- Made from high-quality materials for ultimate durability and great performance meets or exceeds OEM standard. Brand new with good performance.
- Compatibility: For 283 305 327 350 383 400 396 427 454 Che-vy Engines
- Package Includes: 2 x Engine Motor Mounts
- Replacement OEM ( Original Equipment Part) Number: 3474*2
- 1 Year Unlimited-mileage Quality Guarantee
- See more on Amazon...
Brand: LOSTAR | Manufacturer: LOSTAR
See On Amazon #3
YHB Solid Motor Engine Mount Combo SBC BBC for Chevy Frame MountRat Rod Hot Street Engine Bracket Kit 3990914 3960768 6258154 - Motor Mounts Engine zinc Plated Steel
Asin: B09VGPLC8S | Model: YHBOT00856 | PartNumber: YHBOT00856 | Ean: 0768432602697 | UPC: 768432602697
🚗 Includes：2 (Xpc) Steel Solid Motor Mounts & 2 (Xpc) Solid Steel Chassis Pads.
🚗 Replace：Gm Oem Part #3990914.
🚗 Fit：1974-1981 Camaro & Firebird With 307 & 350， 1973-1988 Chevelle, Malibu, Monte Carlo, & El Camino With 307, 350, 402, & 454， 1973-1979 Nova With 307 & 350， 1976-1990 Impala & Caprice With 307 & 350..
🚗 Specs：Mount Centers: 2-5/16" X 5-1/16", Height At Center Is 2", Frame Surface To Mounting Hole Center Is 1", Width At Mounting Sleeve Is 2-3/8"..
Features
- Function These solid mounts replace the stock-style rubber mounts and eliminate excessive engine movement in high performance applications which can result in torque loss and linkage binding. They also work great for custom chassis builds.
- specs Mount centers: 2-5/16 x 5-1/16, Height at center is 2, Frame surface to mounting hole center is 1, Width at mounting sleeve is 2-3/8.
- Includes 2 (xpc) steel solid motor mounts & 2 (xpc) solid steel chassis pads
- Fit 1974-1981 Camaro & Firebird with 307 & 350 1973-1988 Chevelle, Malibu, Monte Carlo, & El Camino with 307, 350, 402, & 454 1973-1979 Nova with 307 & 350 1976-1990 Impala & Caprice with 307 & 350.
- Replace GM OEM part #3990914
- See more on Amazon...
Brand: YHB | Manufacturer: YHB
Dimensions: 0.04 x 0.12 x 0.08 inches
See On Amazon #4
B.ZSSY Universal Engine Weld-in Motor Mount Kit Compatible for Chevy Small and Big Block SBC BBC 350 396 454 4.3L V6 Models Swap Motor mounts Replace for 91018040 Pack of 2
Asin: B0BBLJ3C21 | Model: Replace for 91018040 | PartNumber: Replace for 91018040
3.【Easy】Swap Motor Mounts Align With Your Existing Mounting Holes And Bolt Into A Vehicle.Sturdy Construction And Used For A Long Time..
5.【Package Included】2X Weld-In Motor Mount,2X Bolts,4X Frame Plates.Compatible For Chevy Small And Big Block 350 396 454 Engine..
4.【Weld-Able Design】4 9/5" Welds On Frame Panels Allow To Customize Your Chassis.Increases Flexibility In Frame Tabs Installation..
2.【Well Built】Weld-In Motor Mounts Made Of High-Quality Material,Smooth Powder Coated,And No Sharp Edges,You Don't Worry About Cutting Your Hands..
Features
- 1. FITMENT Swap Weld-in Motor Mounts Compatible for Chevy Small and Big Block SBC BBC 350 396 454 4.3L V6 Engines Replace for part number 91018040.
- 2. WELL BUILT Weld-In Motor Mounts made of high-quality material,smooth powder coated,and no sharp edges,you don't worry about cutting your hands.
- 3. EASY Swap motor mounts align with your existing mounting holes and bolt into a vehicle.Sturdy construction and used for a long time.
- 4. Weld-able Design 4 9/5 welds on frame panels allow to customize your chassis.Increases flexibility in frame tabs installation.
- 5. PACKAGE INCLUDED 2x Weld-In Motor Mount,2x Bolts,4x Frame Plates.Compatible for Chevy Small and Big Block 350 396 454 Engine.
- See more on Amazon...
Brand: B.ZSSY | Manufacturer: B.ZSSY
Dimensions: 4.41 x 7.80 x 5.08 inches
See On Amazon #5
91018040 Engine Swap Weld-In Motor Mount Kit Compatible with Chevy Small & Big Block SBC BBC
Asin: B094QJRF85
【Material】Features Polyurethane Bushing For Vibration Free Performance And Long Bushing Life.
【Package Contents】2X Weld-In Motor Mount,2X Blots,4X Frame Plates .Please Contact Us If The Package You Received Is Missing Parts..
【Performance】4 9/5" Tall Weld On Steel Frame Plates Allow For Customization To Your Specific Chassis.
【Function】These Brackets Allow A Ls Series Engine To Be Bolted Into A Vehicle That Originally Had A Small Block Chevy Engine With Your Existing Mounts..
Features
- COMPATIBILITY Universal engine mount compatible with Chevrolet Small & Big Block 350 396 454 Engine. SBC/BBC and 4.3L V6 engines.
- FUNCTION These brackets allow a LS series engine to be bolted into a vehicle that originally had a small block chevy engine with your existing mounts.
- MATERIAL Features polyurethane bushing for vibration free performance and long bushing life
- PERFORMANCE 4 9/5 tall weld on steel frame plates allow for customization to your specific chassis
- PACKAGE CONTENTS 2x Weld-In Motor Mount,2x Blots,4x Frame Plates .Please contact us if the package you received is missing parts.
- See more on Amazon...
Brand: SEINECA | Manufacturer: SEINECA
See On Amazon #6
ZZRSDAN Motor Mount Block and 8mm Studs Set for 66cc/80cc Motorized Bike kit
Asin: B0BYT6ZJ2S | Ean: 0797427579645 | UPC: 797427579645
One Set Of Front Mount Block,Studs 8Mm,Clamp,Washer And Nuts Are Included; Thread: M8x1.25.
Fitting On Engine With Front Mount Mouth 40Mm；One Set Of Rear Clamp, Studs 8Mm,Washer And Nuts Are Included.
Features
- Motor Mount Block and 8mm Studs Set for 66cc/80cc
- Fitting on engine with front mount mouth 40mm One set of rear clamp, studs 8mm,washer and nuts are included
- One set of front mount block,studs 8mm,clamp,washer and nuts are included; Thread: M8x1.25
- See more on Amazon...
Brand: ZZRSDAN | Manufacturer: gdtong
Warranty: NO
See On Amazon #7
1 Pair SHLPDFM Black Polyurethane Motor Mounts Engine zinc Plated Steel 3990914 3960768 6258154 Comptible with Small Big Block Chevy SBC BBC 350 454
Asin: B09W5PDXFB | Model: SHU00130 | PartNumber: SHU00130
★Features A Black Polyurethane Construction,Specially Deigned To Be Much Stronger Than Oe Rubber Mounts,They Are Tough Like Solid Metal Mounts Without The Vibration And Noise..
★Limits Unwanted Movement Thereby Putting More Power To The Wheels.
★2-9/16" Between Mounting Frame Tower Mounting Tabs..
★Replaces O.E. Part Numbers: 3990914 3960768 6258154.
Features
- Special Fits for Small and Big Block Chevy engines.Also fits Corvette,Camaro,Caprice,Chevelle,Bel-Air,Biscayne,Trans Am,Firebird,Impala,El Camino,Nova
- Replaces O.E. part numbers: 3990914 3960768 6258154
- Features a Black polyurethane construction,Specially deigned to be much stronger than OE rubber mounts,They are tough like solid metal mounts without the vibration and noise.
- 2-9/16 between mounting frame tower mounting tabs.
- Limits unwanted movement thereby putting more power to the wheels
- See more on Amazon...
Brand: SHLPDFM | Manufacturer: SHLPDFM
See On Amazon #8
Motor Mount Block and 8mm Studs Set to Engine Motor kit, 2 Stroke Gas Motorized Bicycle 48cc 66cc/80cc/yd100
Asin: B074Z4F8QP | Model: jl-a-169 | PartNumber: jl-a-169 | Ean: 0754047486418 | UPC: 754047486418
One Set Of Front Mount Block,Studs 8Mm,Clamp,Washer And Nuts Are Included; Thread: M8x1.25.
Kindly Reminding: Pls Recheck Your Engine Front Mount Mouth Before Buy,Ensure It Is 40Mm Mouth.
One Set Of Rear Clamp, Studs 8Mm,Washer And Nuts Are Included.
Motor Mount Studs Set(Front 8Mm And Rear 8Mm) For Yd100/66Cc/80Cc Gas Engine Motor Kit.
Features
- Fitting on engine with front mount mouth 40mm(refer to the fourth picture with sizes in detail )
- Motor Mount Studs Set(front 8mm and rear 8mm) for yd100/66cc/80cc gas engine motor kit
- One set of front mount block,studs 8mm,clamp,washer and nuts are included; Thread: M8x1.25
- One set of rear clamp, studs 8mm,washer and nuts are included
- KINDLY REMINDING: pls recheck your engine front mount mouth before buy,ensure it is 40mm mouth
- See more on Amazon...
Brand: DONSP1986 | Manufacturer: DONSP1986
See On Amazon #9
SBC/BBC Frame and Motor Mount Kit - Chevy V8 Solid Steel Frame Mounts Motor Mounts for SBC 283 327 350 400 Small & Big Block Chevy Engines Off Road Racing
Asin: B09SLK3V2D | Model: M-CHY-MT24 | PartNumber: M-CHY-MT24 | Ean: 0681359892333 | UPC: 681359892333
Frame Brackets Measure Overall Length: 6-1/8" Overall Width: 2-3/8" Center To Center Bolt Hole Length: 5-1/8" Center To Center Bolt Hole Width One: 2-3/8" Center To Center Bolt Hole Width Two: 1-3/4".
Includes - (1) Sbc/Bbc Chevy V8 Solid Steel Frame Mounts;(1) Steel Motor Mounts.
Quality - High-Quality Steel Structure Prevents Distortion During Acceleration And Zinc Plated For Corrosion Resistance.
Specifications - This Combo Kit Includes Both Engine Mounts And Frame Mounts.The Solid Steel Motor Mounts Have The Following Specs: Motor Mounts Eliminate Engine Rotation, Torque Loss, & Prevents Linkage Binding - Measures 2 1/2" Inside The Ears And 1-11/16" From Back Of Mount To Center Of The Bolt Hole.
Features
- FITMENT - The Motor Mounts replace for GM OEM part #3990914 used on most small block from 1958-1972. Replaces original rubber mounts to control excessive engine movement which can result in torque loss and linkage binding.The Frame Mounts are direct replacement for 1974-81 Camaro & Firebird with 307 & 350, 1973-88 Chevelle, Malibu, Monte Carlo, & El Camino with 307, 350, 402, & 454, 1973-79 Nova with 307 & 350, 1976-90 Impala & Caprice with 307 & 350
- SPECIFICATIONS - This combo kit includes both engine mounts and frame mounts.The solid steel Motor Mounts have the following specs: Motor Mounts eliminate engine rotation, torque loss, & prevents linkage binding - measures 2 1/2 inside the ears and 1-11/16 from back of mount to center of the bolt hole
- Frame Brackets measure Overall Length: 6-1/8 Overall Width: 2-3/8 Center to center bolt hole length: 5-1/8 Center to center bolt hole width one: 2-3/8 Center to center bolt hole width two: 1-3/4
- QUALITY - High-quality steel structure prevents distortion during acceleration and Zinc plated for corrosion resistance
- INCLUDES - (1) SBC/BBC Chevy V8 Solid Steel Frame Mounts;(1) Steel Motor Mounts
- See more on Amazon...
Brand: Moker | Manufacturer: Moker
Dimensions: 1.97 x 5.91 x 2.36 inches
See On Amazon #10
BBR Tuning Vibration Motor Mounts (8mm)
Asin: B0BYFJHNBN | Model: 8MM | PartNumber: 8MM | Ean: 0799789986406 | UPC: 799789986406
Easy Instalation: Installation Is A Breeze, Just Remove Your Engines Stock Front And Rear Motor Mount Studs And Replace Them With The Longer Heavy Duty Ones Provided With The Kit. Slide On Your Front And Rear Rubber Block, Drop Your Engine Into Your Frame And Tighten Up Your Motor Mounts. It's That Simple!.
Package Includes: 2X Bbr Tuning Vibration Motor Mount Blocks, 4X 4.5" M6x1.0 Motor Mount Screws, 4X Lock Nuts, 4X Washers, 4X Lock Washers.
Universal Fit: These Vibration Motor Mounts Are Designed To Work With 48Cc, 60Cc, 66Cc And 80Cc 2 Stroke Gas Powered Motorized Bicycle Engine Kits..
Prevents Broken Studs: With Proper Installations These Mounts Prevent Premature Failure Caused By Hard Vibrations And Improperly Installed Engine Mount Studs. No More Broken Engine Studs Or Needed To Us Difficult Screw Extractors Because Of Installation Error..
Features
- REDUCE ENGINE VIBRATION: The BBR Tuning 2-Stroke Vibration Motor Mount Kit is designed to minimize engine vibration that's transferred to your bicycles frame. These vibration isolators install between your engines mount and frame and are constructed of a hard rubber that dampens as much as 75-85% of engine vibrations.
- PREVENTS BROKEN STUDS: With proper installations these mounts prevent premature failure caused by hard vibrations and improperly installed engine mount studs. No more broken engine studs or needed to us difficult screw extractors because of installation error.
- EASY INSTALATION: Installation is a breeze, just remove your engines stock front and rear motor mount studs and replace them with the longer heavy duty ones provided with the kit. Slide on your front and rear rubber block, drop your engine into your frame and tighten up your motor mounts. It's that simple!
- UNIVERSAL FIT: These vibration motor mounts are designed to work with 48cc, 60cc, 66cc and 80cc 2 stroke gas powered motorized bicycle engine kits.
- PACKAGE INCLUDES: 2x BBR Tuning Vibration Motor Mount Blocks, 4x 4.5 M6X1.0 Motor Mount Screws, 4x Lock Nuts, 4x Washers, 4x Lock Washers
- See more on Amazon...
Brand: BBR Tuning | Manufacturer: BBR Tuning
Dimensions: 2.00 x 5.00 x 2.00 inches
See On Amazon #11
New U-Bolt Engine Motor Mount Fit Beach Cruiser Big Frame Motorized Bike Bicycle
Asin: B071P9SW73 | Ean: 0767520656376 | UPC: 767520656376
Size:As Picture.
Arrival Within 6-15 Business Days..
Please Compare Our Product Against Yours, Including Its Appearance, Size,Shape Before Ordering.Thank You..
Package Includes:1*U-Bolt Clamp Kit.
Features
- Fit:80cc Beach Cruiser Big Frame Motorized Bicycle Engine
- Package Includes:1*U-Bolt Clamp Kit
- Size:As Picture
- Please Compare Our Product Against Yours, Including Its Appearance, Size,Shape Before Ordering.Thank You.
- Arrival within 6-15 business days.
- See more on Amazon...
Brand: sthus | Manufacturer: JL JIANGLI LEGEND
See On Amazon #12
DONSP1986 Improved Silver CNC Universal Motor Mount 1.65" -Suit for 3.4L Felt Faker Gas Frame - Gas Motorized Bicycle 48cc/66cc/80cc
Asin: B075S25NDG | Model: jl-a-180 | PartNumber: jl-a-180 | Ean: 0606321919580 | UPC: 606321919580
Suitable For Cdh Yd100 Engine And Cdh Pk80 Engine;Suitable For Cdh 3.4L Felt Faker Gas Frame.
Works On Most Newer Bicycles And Allows You To Mount The Motor Without Drilling Through The Frame..
For 66Cc/80Cc And 48Cc 2-Stroke Bicycle Engines Universal Mount For Bike Motors This Universal Mount Helps Mounts Your Bike Motor To Bigger Down Tubes.
Suitable For Front Mount With Bolt 6Mm And 8Mm (2 In 1); 1Pcs Screw M8x30mm 2Pcs Screw M6x30mm.
Features
- Inner Diameter: 1.65" (42.5mm);Compatible with all brand 2 stroke motors no matter how wide or small the front mount it is
- Suitable for front mount with bolt 6mm and 8mm (2 in 1); 1pcs screw M8X30mm 2pcs screw M6X30mm
- Suitable for CDH YD100 Engine and CDH PK80 Engine;Suitable for CDH 3.4L felt faker Gas Frame
- For 66cc/80cc and 48cc 2-stroke bicycle engines Universal Mount for Bike Motors This universal mount helps mounts your bike motor to bigger down tubes
- Works on most newer bicycles and allows you to mount the motor without drilling through the frame.
- See more on Amazon...
Brand: DONSP1986 | Manufacturer: DONSP1986
See On Amazon #13
DEMOTOR PERFORMANCE For Solid Motor Engine Mount Replacement Combo SBC Frame Mount Zinc Hot Street Stock Rat Rod
Asin: B09BZ5GJ2Z | Model: EM01Z | PartNumber: EM01Z
Mount Centers: 2-5/16" X 5-1/16". The Height At The Center Is 2"..
The Width At The Mounting Sleeve Is 2-3/8"..
Frame Surface To Mounting Hole Center Is 1"..
They Measure 2 1/2" Inside The Ears And 1-11/16" From The Back Of The Mount To The Center Of The Bolt Hole..
Features
- The motor mounts replace GM OEM part #3990914 used on most small block Chevy's from 1958-1972.
- They measure 2 1/2 inside the ears and 1-11/16 from the back of the mount to the center of the bolt hole.
- Mount centers: 2-5/16 x 5-1/16. The height at the center is 2.
- Frame surface to mounting hole center is 1.
- The width at the mounting sleeve is 2-3/8.
- See more on Amazon...
Brand: DEMOTOR PERFORMANCE | Manufacturer: DEMOTOR PERFORMANCE
Weight: 4.40 pounds
See On Amazon #14
1 Pair SHLPDFM Red Polyurethane Motor Mounts Engine zinc Plated Steel 3990914 3960768 6258154 Comptible with Small Big Block Chevy SBC BBC 350 454
Asin: B09W5QJT91 | Model: SHU00129 | PartNumber: SHU00129
★Features A Red Polyurethane Construction,Specially Deigned To Be Much Stronger Than Oe Rubber Mounts,They Are Tough Like Solid Metal Mounts Without The Vibration And Noise..
★Limits Unwanted Movement Thereby Putting More Power To The Wheels.
★2-9/16" Between Mounting Frame Tower Mounting Tabs..
★Replaces O.E. Part Numbers: 3990914 3960768 6258154.
Features
- Special Fits for Small and Big Block Chevy engines.Also fits Corvette,Camaro,Caprice,Chevelle,Bel-Air,Biscayne,Trans Am,Firebird,Impala,El Camino,Nova .
- Replaces O.E. part numbers: 3990914 3960768 6258154
- Features a Red polyurethane construction,Specially deigned to be much stronger than OE rubber mounts,They are tough like solid metal mounts without the vibration and noise.
- 2-9/16 between mounting frame tower mounting tabs.
- Limits unwanted movement thereby putting more power to the wheels
- See more on Amazon...
Brand: SHLPDFM | Manufacturer: SHLPDFM
See On Amazon #15
Tektall Solid Steel Motor Mount Engine Bracket Kit for SBC BBC Chevy Frame Mount Rat Hot Rod
Asin: B09B1XBXVN | Model: 3990914 | PartNumber: 3990914
The Chassis Pads Are Direct Replacement For 1974-81 Camaro & Firebird With 307 & 350, Replace For 1973-88 Chevelle, Malibu, Monte Carlo, & El Camino With 307, 350, 402, & 454, Replace For 1973-79 Nova With 307 & 350, Replace For 1976-90 Impala & Caprice With 307 & 350.
A Set Of Solid Steel For Chevy Motor And Chassis Mounts As Pictured, It Includes 2 New Steel Solid Motor Mounts And 2 New Solid Steel Chassis Pads For Small Block Chevy Engines. These Solid Mounts Replace The Stock-Style Rubber Mounts And Eliminate Excessive Engine Movement In High Performance Applications Which Can Result In Torque Loss And Linkage Binding. They Also Work Great For Custom Chassis Builds..
Specification: The Solid Steel Chassis Pads Have The Following Specs. Mount Centers: 2-5/16" X 5-1/16", Height At Center Is 2", Frame Surface To Mounting Hole Center Is 1", Width At Mounting Sleeve Is 2-3/8"..
Fitment: The Motor Mounts Replace For Gm Oem Part #3990914 Used On Most Small Block Chevy's From 1958-1972. They Measures 2 1/2" Inside The Ears And 1-11/16" From Back Of Mount To Center Of The Bolt Hole..
Features
- High Quality: Brand new aftermarket Tektall Solid motor engine mount Combo are made of Steel, excellent quality and have the right balance in hardness, carries the engine, dampens vibrations and absorbs large engine forces that occur during acceleration and deceleration, improves driving comfort, road holding and prevents damage to the engine.
- Fitment: The motor mounts replace For GM OEM part #3990914 used on most small block Chevy's from 1958-1972. They measures 2 1/2 inside the ears and 1-11/16 from back of mount to center of the bolt hole.
- The chassis pads are direct replacement for 1974-81 Camaro & Firebird with 307 & 350, Replace for 1973-88 Chevelle, Malibu, Monte Carlo, & El Camino with 307, 350, 402, & 454, Replace for 1973-79 Nova with 307 & 350, Replace for 1976-90 Impala & Caprice with 307 & 350
- Specification: The solid steel chassis pads have the following specs. Mount centers: 2-5/16 x 5-1/16, Height at center is 2, Frame surface to mounting hole center is 1, Width at mounting sleeve is 2-3/8.
- A set of solid steel for Chevy motor and chassis mounts as pictured, It includes 2 new steel solid motor mounts and 2 new solid steel chassis pads for small block Chevy engines. These solid mounts replace the stock-style rubber mounts and eliminate excessive engine movement in high performance applications which can result in torque loss and linkage binding. They also work great for custom chassis builds.
- See more on Amazon...
Brand: Tektall | Manufacturer: Tektall
See On Amazon #16
GSKMOTOR Polyurethane Motor Engine Mounts Bracket for Small & Big Block Chevy SBC BBC 350 - Black/Pair
Asin: B08SHTL9CC | Model: GSK-2287045 | PartNumber: GSK-2287045 | Ean: 7020536214989
Brand: GSKMOTOR | Manufacturer: GSK
See On Amazon #17
CDHPOWER Universal Mounting Bracket for 2 Stroke Gas Motor Engine Kit 66cc/80cc - Gas Motorized Bicycle
Asin: B075R1WZ5Q | Ean: 0606321920715 | UPC: 606321920715
For 66Cc/80Cc And 48Cc 2-Stroke Bicycle Engines Universal Mount For Bike Motors This Universal Mount Helps Mounts Your Bike Motor To Bigger Down Tubes.
Any Questions,Please Contact Us Firstly! We Can Help You Solve The Problem Until You Are Satisfied..
Works On Most Newer Bicycles And Allows You To Mount The Motor Without Drilling Through The Frame..
Compatible With 1.5" To 2" Stud Spacing And Suitable For Front Mount Bolt 6Mm And 8Mm.
Features
- Inner Diameter: 1.5"(38.1mm)
- Compatible with 1.5 to 2 stud spacing and suitable for front mount bolt 6mm and 8mm
- For 66cc/80cc and 48cc 2-stroke bicycle engines Universal Mount for Bike Motors This universal mount helps mounts your bike motor to bigger down tubes
- Works on most newer bicycles and allows you to mount the motor without drilling through the frame.
- Any questions,please contact us firstly! we can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
Weight: 0.10 pounds
See On Amazon #18
CDHPOWER Bicycle-Engines Black V-Frame Mounting Plate Kit,Heavy Duty 4-Stroke Mount Plate - Gas Motorized Bicycle 49cc
Asin: B06Y1MF8JJ | Ean: 0764560642673 | UPC: 764560642673
Measurement Of Bolt Hole Where The Engine Mounts:6.5Mm*26.5Mm.
Any Questions,Please Contact Us Firstly! We Can Help You Solve The Problem Until You Are Satisfied..
Heavy Duty Industrial Use 4-Stroke Mount Plate; 4-Stroke Mount Plate Compatible With 49Cc;.
Brand New 4-Stroke Mount Plate In Black Color That Mostly Apply On Your Favorite Bike.
Features
- Bicycle-Engines Black V-Frame Mounting Plate Kit 4-Stroke Mount Plate for 49cc
- Brand new 4-stroke mount plate in black color that mostly apply on your favorite bike
- Measurement of Bolt Hole where the engine mounts:6.5mm*26.5mm
- Heavy duty industrial use 4-stroke mount plate; 4-stroke mount plate Compatible with 49cc;
- Any questions,please contact us firstly! we can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
Weight: 0.10 pounds
See On Amazon #19
Improved Black Universal Motor Mount 1.5" - Suit for 2.4L Gas Frame, 2 Stroke Gas Motorized Bike 48cc/66cc/80cc/yd100
Asin: B071RXM9KR | Model: jl-a-1 | PartNumber: jl-a-1 | Ean: 0747100306617 | UPC: 747100306617
The Pedestal Is Improved So It Is Compatible With All Types 2 Stroke Gas Motor Kit 48Cc/66Cc/80Cc/Yd100 No Matter How Wide The Motor Front Bracket It Is And No Matter What Brand It Is..
Works On Most Newer Bicycles And Allows You To Mount The Motor Without Drilling Through The Frame..
Compatible With Motor Front Mount Bolt 6Mm And 8Mm, 1Pcs Screw M8x30mm 2Pcs Screw M6x30mm.
Inner Diameter: 1.5"(38.1Mm) Which Fits To 38.1Mm/1.5 Inch Downtube Of Bike Frame.
Features
- Improved Black Universal Motor Mount for 2 Stroke Gas Motorized Bike 48cc/66cc/80cc/yd100
- Inner diameter: 1.5(38.1mm) which fits to 38.1mm/1.5 inch downtube of bike frame
- The Pedestal is Improved so it is compatible with all types 2 stroke gas motor kit 48cc/66cc/80cc/yd100 no matter how wide the motor front bracket it is and no matter what brand it is.
- Compatible with Motor front mount bolt 6mm and 8mm, 1pcs screw M8X30mm 2pcs screw M6X30mm
- Works on most newer bicycles and allows you to mount the motor without drilling through the frame.
- See more on Amazon...
Brand: DONSP1986 | Manufacturer: DONSP1986
See On Amazon
Looking For Something Else?
Search