Amana Tool - 46294-S CNC 2D & 3D Carving 0.10 Deg Straight Angle Ball Tip 1/4 Dia x 1/8
Asin: B0753DVLVL | Model: 46294-S | PartNumber: 46294-S | Ean: 0738685046296 | UPC: 738685046296
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Helps To Prevent The Build-Up Of Material In The Flutes While Cutting Have The Tendency To Run/Spin Much Faster Than An Uncoated Tool..
Reduces Chatter (Where The Machine Or Work Piece Vibrates) Under High Chip Loads (When Used With Low Tir Spindles)..
Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding..
Benefits Of Zirconium Nitride (Zrn) Coating Creates A Harder And Tougher Cutting Edge Allows For A Prolonged Cutting Edge Life..
Features
- Made in the USA. Solid Carbide.
- Benefits of Zirconium Nitride (ZrN) Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life.
- Helps to prevent the build-up of material in the flutes while cutting Have the tendency to run/spin much faster than an uncoated tool.
- Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding.
- Reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles).
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon Similar To Amana Tool 46294S CNC 2D
#1
Amana Tool 46202-K Solid Carbide Spiral Plunge Router Bit Down Cut 1/4 Dia x 3/4 x 1/4 Inch Shank, Spektra Extreme Tool Life Coated
Asin: B072J4CPQT | Model: 46202-K | PartNumber: 46202-K | Ean: 0738685446225 | UPC: 738685446225
Cut Clean – Use The Down-Cut Router Bit For Woodworking. Leaves A Smooth Edge On The Surface. Excellent Router Bit For Cutting Wood, Laminate, Melamine, Melamine Particle Board, Mdf, Veneered Plywood..
Industrial-Quality Tools – Amana Tool Is A Worldwide Leading Tool Provider With Usa-Based Corporate Headquarters And Warehouse, Specializing In Industrial-Quality Cutting Tools..
Solid Carbide – Special Solid Carbide Router Bits Made For Long-Lasting Cutting Edge Performance And Tool Life. Our Spektra Bits Feature A Nanocomposite Coating With Extreme Nanohardness And Heat Resistance..
For Use With – Spiral Router Bit Can Be Used With Handheld, Table-Mounted Portable Routers, And As Cnc Machine Router Bits..
Features
- SPIRAL PLUNGE BIT Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action yields a clean accurate cut while the augering action clears chips from the cut.
- FOR USE WITH Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits.
- CUT CLEAN Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate, Melamine, Melamine Particle Board, MDF, Veneered Plywood.
- SOLID CARBIDE Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a nanocomposite coating with extreme nanohardness and heat resistance.
- INDUSTRIAL-QUALITY TOOLS Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools.
- See more on Amazon...
Brand: Amana Tool | Manufacturer: PROOK
Dimensions: 0.50 x 3.00 x 0.50 inches | Weight: 0.08 pounds
See On Amazon #2
Amana Tool - RC-45711 In-Tech Insert Carbide V Groove 90 Deg x 11/16 Dia x 21/64 x 1/4 Inc
Asin: B003DCMDRU | Model: RC-45711 | PartNumber: RC-45711 | Ean: 0738685570005 | UPC: 738685570005
Cutting Height (B): 21/64.
Overall Length (L): 1-61/64.
Shank (D): 1/4.
Angle (A°): 45°.
Features
- Diameter (D): 11/16
- Angle (a ): 45
- Cutting height (B): 21/64
- Shank (D): 1/4
- Overall length (L): 1-61/64
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.75 x 12.50 x 11.75 inches | Weight: 0.06 Pounds
See On Amazon #3
Amana Tool - 46225-K Solid Carbide Spiral Plunge Router Bit Down Cut 1/8 Dia x 13/16 x 1/4 Inch Shank, Spektra Extreme Tool Life Coated
Asin: B074RFPMC2 | Model: 46225-K | PartNumber: 46225-K | Ean: 0738685114629 | UPC: 738685114629
Cut Clean – Use The Down-Cut Router Bit For Woodworking. Leaves A Smooth Edge On The Surface. Excellent Router Bit For Cutting Wood, Laminate, Melamine, Melamine Particle Board, Mdf, Veneered Plywood..
Industrial-Quality Tools – Amana Tool Is A Worldwide Leading Tool Provider With Usa-Based Corporate Headquarters And Warehouse, Specializing In Industrial-Quality Cutting Tools..
Solid Carbide – Special Solid Carbide Router Bits Made For Long-Lasting Cutting Edge Performance And Tool Life. Our Spektra Bits Feature A Nanocomposite Coating With Extreme Nanohardness And Heat Resistance..
For Use With – Spiral Router Bit Can Be Used With Handheld, Table-Mounted Portable Routers, And As Cnc Machine Router Bits..
Features
- SPIRAL PLUNGE BIT Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action yields a clean accurate cut while the augering action clears chips from the cut.
- FOR USE WITH Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits.
- CUT CLEAN Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate, Melamine, Melamine Particle Board, MDF, Veneered Plywood.
- SOLID CARBIDE Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a nanocomposite coating with extreme nanohardness and heat resistance.
- INDUSTRIAL-QUALITY TOOLS Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools.
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.06 Pounds
See On Amazon #4
Amana Tool 45624-K SC Spektra Extreme Tool Life Coated V-Groove 60 Deg x 1/4 D x 31/64 CH x 1/4 Inch SHK 3-Flute Router Bit
Asin: B07JDFKDMC | Model: 45624-K | PartNumber: 45624-K | Ean: 0738685456422 | UPC: 738685456422
Specifications: Diameter (D): 1/4 Angle (A): 60 Cutting Height (B): 31/64 Shank (D): 1/4 Overall Length (L): 2 B1: 7/32 Flutes: 3.
1/4 Inch Shank.
Features
- Made in USA
- 1/4 Inch Shank
- SPECIFICATIONS: Diameter (D): 1/4 Angle (a): 60 Cutting Height (B): 31/64 Shank (d): 1/4 Overall Length (L): 2 B1: 7/32 Flutes: 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #5
Amana Tool 46170-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long 2 Flute Router Bit
Asin: B072562878 | Model: 46170-K | PartNumber: 46170-K | Ean: 0738685994610 | UPC: 738685994610
(D) Shank: 1/4.
B1: 7Mm.
1 Amana Branded Tool.
Overall Length (L): 2-1/2.
(B) Cutting Height: 7/8.
Features
- (D) diameter: 1/4
- (B) Cutting height: 7/8
- (D) shank: 1/4
- Overall length (L): 2-1/2
- B1: 7mm
- 1 Amana Branded Tool
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.25 x 2.50 x 0.25 inches
See On Amazon #6
Amana Tool 45525 Carbide Tipped 1-1/8 Dia x 1/2 CH x 1/4 Shk x 1-19/32 Long Spoilboard Surfacing & Flattening 3-Flute Router Bit
Asin: B07PYX5S5J | Model: 45525 | PartNumber: 45525 | Ean: 0738685455258 | UPC: 738685455258
(B) Cutting Height: 1/2.
Overall Length (L): 2-1/2 Max Rpm: 14 Flutes: 4.
Shank: 1/4.
(D) Diameter: 1-1/2.
Features
- Carbide Tipped
- (D) Diameter: 1-1/2
- (B) Cutting Height: 1/2
- Shank: 1/4
- Overall Length (L): 2-1/2 Max RPM: 14 Flutes: 4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.10 pounds
See On Amazon #7
Amana Tool - 46473 CNC 2D & 3D Carving 6.2 Deg Tapered Angle Ball Tip x 0.5mm Dia x 0.25
Asin: B07BRZDQ5J | Model: 46473 | PartNumber: 46473 | Ean: 0738685464731 | UPC: 738685464731
Helps To Prevent The Build-Up Of Material In The Flutes While Cutting Have The Tendency To Run/Spin Much Faster Than An Uncoated Tool..
Reduces Chatter (Where The Machine Or Work Piece Vibrates) Under High Chip Loads (When Used With Low Tir Spindles)..
Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding..
Benefits Of Zirconium Nitride (Zrn) Coating Creates A Harder And Tougher Cutting Edge Allows For A Prolonged Cutting Edge Life..
Features
- Made in the USA. Solid Carbide.
- Benefits of Zirconium Nitride (ZrN) Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life.
- Helps to prevent the build-up of material in the flutes while cutting Have the tendency to run/spin much faster than an uncoated tool.
- Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding.
- Reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles).
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #8
Amana Tool 45366 Carbide Tipped Flush Trim Plunge Template 3/4 D x 2 CH x 1/2 Inch SHK w/Upper Ball Bearing 2 Flute Router Bit
Asin: B07KDCYSLT | Ean: 0738685453339 | UPC: 738685453339
Specifications: Diameter (D): 3/4 Cutting Height (B): 1 Shank (D): 1/2 Overall Length (L): 3 Replacement Collar: 47739 Replacement Bearing: 47721 Flutes: 3.
1/2 Inch Shank.
Features
- Carbide Tipped
- 1/2 Inch Shank
- SPECIFICATIONS: Diameter (D): 3/4 Cutting Height (B): 1 Shank (d): 1/2 Overall Length (L): 3 Replacement Collar: 47739 Replacement Bearing: 47721 Flutes: 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.30 pounds
See On Amazon #9
Amana Tool 46176-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/8 D x 13/16 CH x 1/4 SHK x 2-1/2 Inch Long Router Bit
Asin: B07MXHH2GB | Model: 46176-K | PartNumber: 46176-K | Ean: 0738685004616 | UPC: 738685004616
Specifications: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (D) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: Naco Ceramic Coating Flutes: 2.
Solid Carbide.
Features
- Made in the USA
- Solid Carbide
- SPECIFICATIONS: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (d) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: nACo Ceramic Coating Flutes: 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.06 Pounds
See On Amazon #10
Amana Tool - 46280-K CNC 2D & 3D Carving 6.2 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/6
Asin: B074C5FN6C | Model: 46280-K | PartNumber: 46280-K | Ean: 0738685004623 | UPC: 738685004623
(A°) Angle: 6.2°.
(D) Shank: 1/4.
(B) Cutting Height: 1.
(R) Radius: 1/64.
Features
- (D) diameter: 1/32
- (R) radius: 1/64
- (A ) angle: 6.2
- (B) Cutting height: 1
- (D) shank: 1/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #11
Amana Tool 51404-K Solid Carbide Spiral CNC Router Bit O-Flute Up-Cut for Plastic Cutting 1/4 Dia x 3/4 x 1/4 Inch Shank, Spektra Extreme Tool Life Coated
Asin: B01MZEJCU0 | Model: 51404-K | PartNumber: 51404-K | Ean: 0738685090954 | UPC: 738685090954
For Use With – Cnc Router Bits Can Be Used In Machines And Routers With Automatic Feeding..
Solid Carbide – Special Solid Carbide Router Bits Made For Long-Lasting Cutting Edge Performance And Tool Life. Our Spektra Bits Feature A Nanocomposite Coating With Extreme Nanohardness And Heat Resistance..
Industrial-Quality Tools – Amana Tool Is A Worldwide Leading Tool Provider With Usa-Based Corporate Headquarters And Warehouse, Specializing In Industrial-Quality Cutting Tools. Made In The Usa..
Super Smooth, Clean Cuts – Use The O-Flute Router Bit To Produce Super Clean, Smooth Cuts. Bits Are Polished To A Mirror Finish For Razor Sharp Cutting Edge, Effortless Chip Removal, And Exceptional Cut Quality..
Router Bit For Plastic – Spiral Router Bit For Plastic Cutting, Especially In Acrylic Materials, Other Plastics, And Wood..
Features
- Made in the USA
- ROUTER BIT FOR PLASTIC Spiral router bit for plastic cutting, especially in acrylic materials, other plastics, and wood.
- FOR USE WITH CNC router bits can be used in machines and routers with automatic feeding.
- SUPER SMOOTH, CLEAN CUTS Use the o-flute router bit to produce super clean, smooth cuts. Bits are polished to a mirror finish for razor sharp cutting edge, effortless chip removal, and exceptional cut quality.
- SOLID CARBIDE Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a nanocomposite coating with extreme nanohardness and heat resistance.
- INDUSTRIAL-QUALITY TOOLS Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools. Made in the USA.
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #12
Amana Tool - 45707 Carbide Tipped "Zero Pt." V-Groove 60 Deg x 1/2 Dia x 9/16 x 1/4"
Asin: B077HQKV4B | Model: 45707 | PartNumber: 45707 | Ean: 0738685457078 | UPC: 738685457078
Cutting Height (B) 9/16.
Overall Length (L) 2-1/4.
Shank (D) 1/4.
Angle (A°) 60°.
Features
- Diameter (D) 1/2
- Angle (a ) 60
- Cutting height (B) 9/16
- Shank (D) 1/4
- Overall length (L) 2-1/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.50 x 6.00 x 2.00 inches
See On Amazon #13
Amana Tool - 49504 Carbide Tipped Corner Round 1/4 Radius x 1" Dia x 1/2 x 1/4 Shank
Asin: B0002C9BXI | Model: 49504 | PartNumber: 49504 | Ean: 0738685895047 | UPC: 738685895047
Cutting Height (B) 1/2.
Overall Length (L) 2.
Shank (D) 1/4.
Radius (R) 1/4.
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.08 pounds
See On Amazon #14
Amana Tool - 45792 Carbide Tipped Double Edge Folding V-Groove 90 Deg x 0.090" Tip Wid
Asin: B003DCIUV8 | Model: 45792 | PartNumber: 45792 | Ean: 0738685457924 | UPC: 738685457924
Cutting Height (B) 3/8.
Overall Length (L) 2.
Shank (D) 1/4.
Angle (A°) 90°.
Features
- Diameter (D) 1/2
- Angle (a ) 90
- Cutting height (B) 3/8
- Shank (D) 1/4
- Overall length (L) 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.04 pounds
See On Amazon #15
Amana Tool - 46102-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia
Asin: B07235NBKF | Model: 46102-K | PartNumber: 46102-K | Ean: 0738685461129 | UPC: 738685461129
(B) Cutting Height: 3/4.
Overall Length (L): 2-1/2.
(D) Shank: 1/4.
(D) Diameter: 1/4.
Features
- Direction: up-cut
- (D) diameter: 1/4
- (B) Cutting height: 3/4
- (D) shank: 1/4
- Overall length (L): 2-1/2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.50 x 3.00 x 0.50 Inches
See On Amazon #16
Amana Tool - 47200 Carbide Tipped Bevel Laminate Trim 15 Deg x 5/8 Dia x 1/4 Sh
Asin: B000P4JT80 | Model: 47200 | PartNumber: 47200 | Ean: 0738685872000 | UPC: 738685872000
Cutting Height (B) 1/4.
Overall Length (L) 2-3/32.
Shank (D) 1/4.
Angle (A°) 15°.
Features
- Diameter (D) 5/8
- Angle (a ) 15
- Cutting height (B) 1/4
- Shank (D) 1/4
- Overall length (L) 2-3/32
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.06 pounds
Warranty: Limited Lifetime Gaurantee
See On Amazon #17
Amana Tool - 46172-K (Previous# 46162) CNC Solid Carbide Spektra Extreme Tool Life C
Asin: B07F6NY9BS | Model: 46172-K | PartNumber: 46172-K | Ean: 0738685446171 | UPC: 738685446171
(D) Shank: 3/8.
B1: 9Mm.
1 Amana Branded Tool.
Overall Length (L): 3.
(B) Cutting Height: 1-1/4.
Features
- (D) diameter: 3/8
- (B) Cutting height: 1-1/4
- (D) shank: 3/8
- Overall length (L): 3
- B1: 9mm
- 1 Amana Branded Tool
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.60 x 3.50 x 0.60 inches | Weight: 0.00 pounds
See On Amazon #18
Amana Tool - 45705 Carbide Tipped V-Groove 60 Deg x 1/2 Dia x 5/8 x 1/4" Shank
Asin: B000K29UBS | Model: 45705 | PartNumber: 45705 | Ean: 0738685857052 | UPC: 738685857052
Cutting Height (B) 5/8.
Overall Length (L) 1-3/4.
Shank (D) 1/4.
Angle (A°) 60°.
Features
- Diameter (D) 1/2
- Angle (a ) 60
- Cutting height (B) 5/8
- Shank (D) 1/4
- Overall length (L) 1-3/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #19
Amana Tool - 46415-K) 1/4DX1/4Shk Downcut Spiral Spk
Asin: B071Z9BXFY | Model: 46415-K | PartNumber: 46415-K | Ean: 0738685464410 | UPC: 738685464410
Solutions For Manufacturers, Fabricators, Display And Cabinet Professionals.
Commitment To Offer The Highest Consistent Quality And Innovative Products.
U.S.A. Corporate Headquarters And Warehouse, Located In New York.
Devotion To Consistently Providing The Highest Quality.
Features
- Amana Tool is an industry leader for over 40 years
- Devotion to consistently providing the highest quality
- Solutions for manufacturers, fabricators, display and cabinet professionals
- U.S.A. Corporate headquarters and warehouse, located in new York
- Commitment to offer the highest consistent quality and innovative products
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #20
Amana Tool - 46376-K Solid Carbide Spektra Extreme Tool Life Coated Up-Cut Ball Nose Spira
Asin: B078ZG4M4S | Model: 46376-K | PartNumber: 46376-K | Ean: 0738685463772 | UPC: 738685463772
(R) Radius: 1/8.
(D) Shank: 1/4.
(B) Cutting Height: 1.
(D) Diameter: 1/4.
Features
- Direction: up-cut
- (D) diameter: 1/4
- (R) radius: 1/8
- (B) Cutting height: 1
- (D) shank: 1/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon
Looking For Something Else?
Search