Legines Brass Compression Fitting, Tee Union, 3 Ways Connector, 3/8" Tube OD, Pack of 2
Asin: B075MBMMCY | Ean: 6131677148772
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Disassemble No Flaring Tool Required.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
Standard Fittings Use Short NutsïŒEasy To Disassemble No Flaring Tool Required.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Standard fittings use short nuts Easy to disassemble no flaring tool required
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.12 x 1.97 Inches
See On Amazon Similar To Legines Brass Compression Fitting Tee
#1
Litorange Lead-Free Brass 2 PCS Brass Angle Stop Add-A-Tee Valve 3/8" Compression Inlet by 3/8" Compression Outlet by 3/8 Inch Compression Outlet Easy Connect Tee
Asin: B0C4P6PBWT
â
Inlet 3/8" Od Female Comp X 3/8" Od Comp Outlet X 3/8" Od Comp Outlet . Angle Add-A-Tee Valve Is Fit Your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, Second Faucet And Supply Lines.This Supply Line Add On Tee Fitting Is Great For Splitting Your Water Supply To Separate Pathways..
â
Built-In Rubber Ring For Better Sealing, A Sealing Tape Included For Further Improving Sealing Performance By Using On The Male Thread End.Teflon Tape And Thread Sealant Are Recommended For Threaded Joints.Only Spend You A Few Minutes To Install This Water Supply Spliter Tee Fitting..
â
Resists Corrosion And Mineral Buildup, Rust, And Freeze Damage.Have A Longer Using Life Than Iron And Iron Galvanized Products.Litorange Brass For Corrosion Resistance, High Temperature Ductility And Low Magnetic Permeability..
â
Lead-Free Brass,Meets California Ab-1953, Vermont, And New Federal Standards For Low Lead Applications. Can Gurantee Your Family Health And Safe On Potable And Non-Potable Water.Applicable In Residential And Commercial Usage..
Features
- What do you get:2 PCS 3/8 inch Lead-free chorme Add-A-Tee valve and 1 PCS Tape. Comes with 1 year guarantee.
- Lead-free Brass,meets California AB-1953, Vermont, and new federal standards for low lead applications. Can gurantee your family health and safe on potable and non-potable water.Applicable in residential and commercial usage.
- Inlet 3/8 OD female COMP x 3/8 OD COMP outlet x 3/8 OD COMP outlet . Angle add-a-tee valve is fit your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, second faucet and Supply Lines.This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways.
- Resists corrosion and mineral buildup, rust, and freeze damage.Have a longer using life than iron and iron galvanized products.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
- Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end.Teflon tape and thread sealant are recommended for threaded joints.Only spend you a few minutes to install this water supply spliter tee fitting.
- See more on Amazon...
Brand: LitOrange | Manufacturer: Litorange
See On Amazon #2
Legines Brass Compression Tube Fitting, Union, 1/4" OD x 1/4" OD Coupler, Pack of 2
Asin: B075L98VNH | Ean: 6208252173198
Use With Copper,Aluminum And Thermoplastic Tub-Ing.Not Recommended For Steel Tubing..
Meets Specifications And Standards Of Asa, Asme Asn Sae..
Not Recommended For Application Using Gas Eous Media..
Manufactured For Low And Medium Pressure Tubing Connection Work Where Excessive Vibration Or Tube Movement Is Not Involved..
Features
- Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
- Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
- Use with copper,aluminum and thermoplastic tub-ing.Not recommended for steel tubing.
- Not recommended for application using gas eous media.
- Meets specifications and standards of ASA, ASME asn SAE.
- See more on Amazon...
Brand: Legines | Manufacturer: 62
Dimensions: 4.33 x 5.51 x 1.97 inches | Weight: 0.11 pounds
See On Amazon #3
3/8 Compression Tee Valve, Standard Angle Tee Valve, 2 PCS Brass Tee Adapter 3 Way Valve Compression 3/8'' Inlet and 3/8'' Outlet, Brass Angle Stop Valve, 3/8 Add-A-Tee Valve Connector
Asin: B09H3F9XRF | Model: 3/8 Compression Tee Valve | PartNumber: 3/8 Compression Tee Valve | Ean: 0770456502563 | UPC: 770456502563
ăMultipurpose & Easy InstallationăUsed For Adding To An Outlet Water Shut Off Valve With A Washer, Toilet Bidet, Faucet And Sprayer Hose Etc..
ăPackage Includedă3/8 Inch Lead Free Add-A-Tee Valve ( 2 Pcs )..
ăSizeăUs Standard. Thread Size Is 3/8" ( Also Name 9/16" ) Female Thread, 3/8" Male Thread. Rubber Gasket Included..
ăAdvantageăBrass For Corrosion Resistance, Have A Longer Using Life Than Iron And Iron Galvanized Products, High Temperature Ductility And Low Magnetic Permeability. Built-In Rubber Ring For Better Sealing, A Sealing Tape Included For Further Improving Sealing Performance By Using On The Male Thread End..
Features
- Lead Free Brass Heath and environment friendly material. Lead free brass tee adapter 3 way valve compression 3/8" inlet and 3/8" outlet.
- Advantage Brass for corrosion resistance, have a longer using life than iron and iron galvanized products, high temperature ductility and low magnetic permeability. Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end.
- Multipurpose & Easy Installation Used for adding to an outlet water shut off valve with a washer, toilet bidet, faucet and sprayer hose etc.
- Size US standard. Thread size is 3/8 ( also name 9/16 ) female thread, 3/8 male thread. Rubber gasket included.
- Package Included 3/8 Inch lead free add-a-tee valve ( 2 pcs ).
- See more on Amazon...
Brand: Stanweemix | Manufacturer: Stanweemix
See On Amazon #4
160PCS Compression Fittings Assortment kit - 4 Sizes (1/4", 3/8", 5/16", 1/2") of Brass Compression Sleeve Ferrule & Insert - Used to Connect Lines for air,Water,Fuel,Oil and inert Gases
Asin: B0C6PHGHGM | Model: HA-160pcs-CM-Kit1 | PartNumber: HA-160pcs-CM-Kit1
â
High-Quality Material: Solid , High Quality And Durable Brass Construction. Lead Free, Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability..
â
ApplicationsïŒThis Brass Compression Kit Can Be Connected To Copper, Brass, Aluminum, Or Plastic Tubing. No Flaring Tool Is Required For Assembly.It Can Keeps Plastic Tube From Collapsing When Tightened. And Prevent Leakage..
â
Easy To Use: These Fittings Are Easy To Assemble Requiring No Soldering, Flaring Or Deburring. Standard Compression Fittings Are Suitable For A Wide Variety Of Applications..
â
Sizes : đ· 1/4 Inches- 20Pcs Compression Sleeve Ferrule, 20Pcs Compression Insert đ· 3/8 Inches- 20Pcs Sleeve Ferrule, 20 Pcs Insertđ· 5/16 Inches- 20Pcs Sleeve Ferrule, 20 Pcs Insert đ· 1/2 Inches- 20Pcs Sleeve Ferrule, 20 Pcs Insert..
Features
- Brief Description: You'll get 160 pieces of compression fittings including compression sleeve ferrule and Insert of 4 different sizes for your convenience.
- Sizes : 1/4 inches- 20pcs compression sleeve ferrule, 20pcs compression insert 3/8 inches- 20pcs sleeve ferrule, 20 pcs insert 5/16 inches- 20pcs sleeve ferrule, 20 pcs insert 1/2 inches- 20pcs sleeve ferrule, 20 pcs insert.
- High-Quality Material: Solid , High Quality and durable brass construction. Lead Free, Corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Easy to Use: These fittings are easy to assemble requiring no soldering, flaring or deburring. Standard Compression Fittings are suitable for a wide variety of applications.
- Applications This brass compression kit can be connected to copper, brass, aluminum, or plastic tubing. No flaring tool is required for assembly.It can keeps plastic tube from collapsing when tightened. And prevent leakage.
- See more on Amazon...
Brand: Generic | Manufacturer: HaSaoMoi
Dimensions: 0.90 x 6.85 x 3.93 Inches
See On Amazon #5
Legines Brass Street Tee 1/8" NPT Female x 1/8" NPT Male x 1/8" NPT Female Pipe Fitting, Barstock Male Run Tee, Oil Pressure T Fitting Splitter (Pack of 2)
Asin: B074FSVDF3 | Model: 3750ĂAA | PartNumber: 3750ĂAA | Ean: 6612145750593
Use With Brass, Steel, And Iron Pipe; Designed For Use In Air, Water, Oil, Nature, Manufactured, Mixed, Liquefied Petroleum Or Propane And Lp Gas-Air..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
Female And Male National Pipe Taper (Npt) Threads On Two Ends And Female Nptthreads On The Branch For Connecting Three Threaded Pipes.
Features
- Street tee with three openings for connecting and branching three pipes with different ends
- Female and male National Pipe Taper (NPT) threads on two ends and female NPTthreads on the branch for connecting three threaded pipes
- Use with brass, steel, and iron pipe; Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air.
- Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.12 x 1.97 Inches | Weight: 0.15 pounds
See On Amazon #6
46 PCS Compression Fittings, Brass Compression Tube Pipe Fittings Assortment Set, 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" OD Compression Union Connector and Compression Sleeves Ferrules
Asin: B0CXGZHH6B
ă46Pcs Brass Compression Fittingsă- The Package Of Brass Air Line Compression Fittings Include: 1/8"-4 Pcs, 3/16"-4 Pcs, 1/4"-4 Pcs, 5/16"-4 Pcs, 3/8"-4Pcs,And 1/2"-2 Pcs Compression Coupling. 1/8"-4 Pcs, 3/16"-4 Pcs, 1/4"-4 Pcs, 5/16"-4 Pcs, 3/8"-4 Pcs,And 1/2" -4 Pcs Compression Sleeves Ferrules..
ă Profetional Manufacturers ă: Made By Profetional Factory, Materials And Products Was Strictly Tested Before Leaving The Factory, This Brass Compression Tube Fittings Meet The Specifications And Standards Of Asa, Asme Asn Sae.
ăApplicationă- Perfectly For Oil, Gas, Water And Other Non-Corrosive Or Corrosive Pipeline Systems, No Need For Welding And Flaring Tools, Easy Disassembly, Installation And Maintenance, Etc..
ăWorking Pressure & Tempreatureă- 2000Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Features
- Excellent Brass Material - Wear-resistant, corrosion-resistant, non-rusting, high sealability, high compression strength, low magnetic permeability and high temperature ductility.
- Working Pressure & Tempreature - 2000PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- 46pcs Brass Compression Fittings - The Package of Brass air line compression fittings include: 1/8-4 pcs, 3/16-4 pcs, 1/4-4 pcs, 5/16-4 pcs, 3/8-4pcs,and 1/2-2 pcs compression coupling. 1/8-4 pcs, 3/16-4 pcs, 1/4-4 pcs, 5/16-4 pcs, 3/8-4 pcs,and 1/2 -4 pcs compression sleeves ferrules.
- Application - Perfectly for oil, gas, water and other non-corrosive or corrosive pipeline systems, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.
- Profetional Manufacturers : Made by Profetional Factory, Materials and products was strictly tested before leaving the factory, This brass compression tube fittings Meet the specifications and standards of ASA, ASME asn SAE
- See more on Amazon...
Brand: CAMNWAMN | Manufacturer: Guben Trading
See On Amazon #7
Taiidaues 46pcs Brass Compression Tube Pipe Fittings Assortment Kit, 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" OD Compression Union Connector & Compression Sleeves Ferrules
Asin: B0CF9D8K2Z
đ§ăWorking Pressure & Temperatureă - 2000 Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
đ§ăTipsă- These Copper Tubing Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
đ§ăYou Will Getă- Brass Air Line Compression Fittings Contain: 1/8"-4 Pcs, 3/16"-4 Pcs, 1/4"-4 Pcs, 5/16"-4 Pcs, 3/8"-4Pcs,And 1/2"-2 Pcs Compression Coupling. 1/8"-4 Pcs, 3/16"-4 Pcs, 1/4"-4 Pcs, 5/16"-4 Pcs, 3/8"-4 Pcs,And 1/2" -4 Pcs Compression Sleeves Ferrules. Total 46 Pcs Brass Compression Fittings..
đ§ăWidely Useă- Brass Compression Tube Fittings Meet Specifications And Standards Of Asa, Asme Asn Sae. Good Sealing And Repeatability, Temperature And Pressure Resistance. Perfect Fit For Oil, Gas, Water And Other Non-Corrosive Or Corrosive Pipeline Systems , No Need For Welding And Flaring Tools, Easy Disassembly, Installation And Maintenance, Etc..
Features
- High Quality - Our brass compression fittings kit is made of high-quality brass, with strong wear corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Widely Use - Brass compression tube fittings meet specifications and standards of ASA, ASME asn SAE. Good sealing and repeatability, temperature and pressure resistance. Perfect fit for oil, gas, water and other non-corrosive or corrosive pipeline systems , no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.
- WORKING PRESSURE & TEMPERATURE - 2000 PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- You Will Get - Brass air line compression fittings contain: 1/8-4 pcs, 3/16-4 pcs, 1/4-4 pcs, 5/16-4 pcs, 3/8-4pcs,and 1/2-2 pcs compression coupling. 1/8-4 pcs, 3/16-4 pcs, 1/4-4 pcs, 5/16-4 pcs, 3/8-4 pcs,and 1/2 -4 pcs compression sleeves ferrules. Total 46 pcs Brass Compression Fittings.
- Tips - These copper tubing fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Taiidaues | Manufacturer: Taiidaues
See On Amazon #8
Breezliy 210PCS Tube OD 1/8" 3/16" 1/4" 5/16" 3/8" 1/2") Brass Compression Sleeves Ferrules,6 Sizes Brass Compression Fitting Assortment Kit
Asin: B09H5MYGV7 | Model: Sleeves Ferrules | PartNumber: Sleeves Ferrules | Ean: 0762027637361 | UPC: 762027637361
â
ăMaterialăMade Of Pure Brass, Ductility At High Temperatures, And Low Magnetic Permeability, Strong, Corrosion-Resistant, Solid..
â
ăGuaranteeăWe Guarantee That Our Products Are Of High Quality And Affordable. We Are Committed To Providing Better Service, Cherish Every Customer, And Hope You Can Have A Better Shopping Experience..
â
ăLimit Levelă3000 Psi Working Pressure, Temperature Range Of -65°F To 250°F (-53°C To 121°C).
â
ăApplicationăConnects To Copper, Brass, Aluminum, Or Plastic Tubing, Used To Connect Lines For Air,Water,Fuel,Oil And Inert Gases In A Quick And Simple Way..
Features
- Package include 40 pcs 1/8" ,40 pcs 3/16", 50 pcs 1/4", 30 pcs 5/16", 30 pcs 3/8", 20 pcs 1/2" Total 210pcs and placed in a complete Box.
- Application Connects to copper, brass, aluminum, or plastic tubing, used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
- Material Made of pure brass, ductility at high temperatures, and low magnetic permeability, strong, corrosion-resistant, solid.
- Limit level 3000 PSI working pressure, Temperature range of -65 F to 250 F (-53 C to 121 C)
- Guarantee We guarantee that our products are of high quality and affordable. We are committed to providing better service, cherish every customer, and hope you can have a better shopping experience.
- See more on Amazon...
Brand: Breezliy | Manufacturer: Breezliy
Dimensions: 0.60 x 4.70 x 2.50 inches | Weight: 1.00 pounds
See On Amazon #9
Legines Brass Pipe Tee 1/8" NPT Female x 1/8" NPT Female x 1/8" NPT Female Forged 3 Way T-fittings (2 pcs)
Asin: B076XZY34W | Model: 3720 | PartNumber: 3720 | Ean: 6937997002622
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Temperature Range Of -65 To +250 Degrees F.
1/8" Female Npt Threads For Connecting To Male Threaded Pipes.
Features
- Tee with three openings for connecting and branching three pipes,including 2 PCS
- 1/8 Female NPT threads for connecting to male threaded pipes
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #10
Breezliy 150PCS Tube OD 1/4" 5/16" 3/8" 1/2") Brass Compression Sleeves Ferrules & Insert,4 Sizes Brass Compression Fitting Assortment Kit
Asin: B0953DHP6Y | Model: A037 | PartNumber: A037 | Ean: 0762027766160 | UPC: 762027766160
â
Used With Plastic And Copper Tubing..
â
Application: Commonly Used To Connect Lines For Air,Water,Fuel,Oil And Inert Gases In A Quick And Simple Way..
â
Package Include:30Pcs 1/4" ,20Pcs 5/16",15Pcs 3/8" ,10Pcs 1/2" Sleeves Ferrules And Insert ,Total Is 150Pcs Brass Compression Fitting..
â
Material: Brass.Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Features
- Suitable for the outer diameter of the pipe:1/4" 5/16" 3/8" 1/2"
- Material: Brass.Corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Used with plastic and copper tubing.
- Package Include:30PCS 1/4 ,20PCS 5/16,15PCS 3/8 ,10PCS 1/2 Sleeves Ferrules and Insert ,Total is 150PCS Brass Compression Fitting.
- Application: Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
- See more on Amazon...
Brand: Breezliy | Manufacturer: Breezliy
Dimensions: 1.00 x 5.00 x 4.00 inches
See On Amazon #11
Anderson Metals - 50064-04 50064 Brass Compression Tube Fitting, Tee, 1/4" x 1/4" x 1/4" Tube OD
Asin: B000KDZVRO | Model: 50064-04 | PartNumber: 50064-04 | Ean: 0719852933809 | UPC: 719852933809
Standard Fittings Use Short Nuts.
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Easy To Disassemble No Flaring Tool Required.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
See On Amazon #12
Legines Brass 3/8" NPT Female 3/8" NPT Female Coupling Coupler Hex Head Pipe Fitting 1200psi (2pcs)
Asin: B07487RDCS | Ean: 6612145750272
Legines Pipe Fittings Are Made Of Ca360 Or Ca377 Brass, Not Ordinary Copper Alloy, And Meet Sae Standard, Have Dryseal Threads, Forgings & Extruded..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Pressure Of Our Fittings Is Up To 1200Psi, More Higher Than Other General Fittings. Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
3/8" Female National Pipe Taper (Npt) Threads For Connecting To 3/8" Male Threaded Pipes..
Features
- Coupling for connecting two pipes with the same diameter in a straight run
- 3/8 Female National Pipe Taper (NPT) threads for connecting to 3/8 male threaded pipes.
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 3.94 x 3.94 x 3.94 Inches | Weight: 0.22 pounds
See On Amazon #13
Litorange Lead-Free 1 PCS Brass Angle Stop Add-A-Tee Valve 3/8" Female by 3/8 Inch by 1/4-Inch Male T Extender Water Compression Easy Connect Tee (Pack of 1)
Asin: B0B6TV6F2Q
â
Resists Corrosion And Mineral Buildup, Rust, And Freeze Damage.Litorange Brass For Corrosion Resistance, High Temperature Ductility And Low Magnetic Permeability..
â
Package Include: 1 Pcs 3/8 Inch X 1/4 "Add-A-Tee.Comes With 1 Year Guarantee..
â
Built-In Rubber Ring For Better Sealing, A Sealing Tape Included For Further Improving Sealing Performance By Using On The Male Thread End.Teflon Tape And Thread Sealant Are Recommended For Threaded Joints..
â
Angle Stop Add-A-Tee Is Fit Your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, And Supply Lines.This Supply Line Add On Tee Fitting Is Great For Splitting Your Water Supply To Separate Pathways..
Features
- Lead free Brass, Inlet 3/8" OD female COMP x 1/4" OD COMP x 3/8" OD COMP.Safe for potable and non-potable water supply.Applicable in residential and commercial usage.
- Angle stop add-a-tee is fit your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, and Supply Lines.This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways.
- Resists corrosion and mineral buildup, rust, and freeze damage.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
- Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end.Teflon tape and thread sealant are recommended for threaded joints.
- Package include: 1 PCS 3/8 inch x 1/4 Add-A-Tee.Comes with 1 year guarantee.
- See more on Amazon...
Brand: LitOrange | Manufacturer: Litorange
See On Amazon #14
TT FLEX Tee Stop Valve, 3/8 Inch x 3/8 Inch x 3/8 Inch, 1/4 Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Asin: B0CP5SJ619
đ§ăPerfect For Useă Enables Precise Control Of Branch Waterways, Suitable For Toilet Water Supply Hoses, Faucet Supply Lines, Dishwasher, And Adaptable As A Toilet, Faucet, Dishwasher, Or Filter Valve..
đă10-Year WarrantyăPlease Purchase With Confidence,If You Have Any Issue With Our Gas Appliance Connector Kit, Simply Email Us..
đ§ăCertifiedăNorth America Quality Insurance. Nsf/Ansi-61 Certification And Cupc Approved.Ensure A Clean, Leak-Free Connection..
đ§ăLead Freeă1/4-Turn Handle Angle Stop Valve Made Of Lead Free Brass And A Chrome-Plated Finish..
Features
- FEATURES 3/8 inch x 3/8 inch x 3/8 inch Tee Stop Valve ,Heavy duty solid grade brass, Chrome plated.
- LEAD FREE 1/4-turn Handle Angle stop valve Made of Lead Free Brass and a Chrome-Plated Finish.
- Perfect for Use Enables precise control of branch waterways, suitable for toilet water supply hoses, faucet supply lines, dishwasher, and adaptable as a Toilet, Faucet, Dishwasher, or Filter Valve.
- CERTIFIED North America Quality Insurance. NSF/ANSI-61 certification and CUPC approved.Ensure a clean, leak-free connection.
- 10-YEAR WARRANTY Please purchase with confidence,if you have any issue with our gas appliance connector kit, simply email us.
- See more on Amazon...
Brand: TT FLEX | Manufacturer: Ningbo Tiantai Hose Factory
See On Amazon #15
Legines Brass Compression Fitting, Tee Union, 3 Ways Connector, 1/4" Tube OD, Pack of 2
Asin: B075MBKF82 | Model: 64 | PartNumber: 64 | Ean: 6131677148758
Easy To Disassemble No Flaring Tool Required.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
Standard Fittings Use Short NutsïŒEasy To Disassemble No Flaring Tool Required.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Standard fittings use short nuts Easy to disassemble no flaring tool required
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.12 x 1.97 Inches | Weight: 0.15 pounds
See On Amazon #16
Breezliy Lead-Free Brass Angle Stop Add-A-Tee Valve 3/8" Compression Inlet by 3/8" Compression Outlet by 1/4 Inch Compression Outlet Easy Connect Tee 2 Pack)
Asin: B0BDLBZ9P6 | Model: Add-A-Tee Valve | PartNumber: Add-A-Tee Valve | Ean: 0762027464004 | UPC: 762027464004
âżLead Free Product, Meets California Ab-1953, Vermont, And New Federal Standards For Low Lead Applications..
âżInclude: 2 Pcs 3/8'' X 3/8''X 1/4'' Add-A-Tee With 1 Pc Teflon Tape..
âżApplication:Used For Adding An Outlet On A Water Shut Off For A Refrigerator, Ice Maker, Water Filtration System, Second Faucet, Drinking Fountain, And Many More. Install On Angle Stop..
âżSize:Inlet 3/8" Od Female Comp Inlet X 3/8" Od Comp Oulet X 1/4" Od Comp Outlet..
Features
- Material :Lead-free brass, Resists corrosion and mineral buildup, rust, and freeze damage.
- Size:Inlet 3/8 OD female COMP inlet x 3/8 OD COMP oulet x 1/4 OD COMP outlet.
- Lead free product, meets California AB-1953, Vermont, and new federal standards for low lead applications.
- Application:Used for adding an outlet on a water shut off for a refrigerator, ice maker, water filtration system, second faucet, drinking fountain, and many more. Install on angle stop.
- Include: 2 PCS 3/8'' x 3/8''x 1/4'' Add-A-Tee with 1 PC Teflon Tape.
- See more on Amazon...
Brand: Breezliy | Manufacturer: Breezliy
Dimensions: 0.40 x 3.00 x 2.00 Inches
See On Amazon #17
Legines 1/8" Hose Barb Tee, 1/8 x 1/8 x 1/8 inch Brass Barbed T Fitting, 3 Ways Hoses Connector, 2 pcs
Asin: B075399398 | Ean: 6208252172733
Typical Application: Temperature Control Circuits, Pneumatic Circuits, Vacuum And Fluid Systems Test Apparatus, Lubricant, Coolant Lines;.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Barbed Fitting Creates A Tight Seal On Flexible And Semi-Rigid Hose When Used With A Hose Clamp Or Crimp Sleeve Or Ferrule (Sold Separately).For Use With Plastic Or Rubber Hose.
Features
- Barb tee is used to connect lines for air, fuel, oil and inert gases in a quick and simple way.
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose
- Typical Application: Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines;
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.51 x 1.97 Inches | Weight: 0.00 pounds
See On Amazon #18
TRUSTKITS 38 PCS 1/4" Compression Fittings Assortment, Brass Compression Union with Sleeves Ferrules, Straight Coupling Adapter, Tube Tee,90 Degree Elbow NPT Brass Fittings
Asin: B0CQNZ5K2T | Model: Compression-38pcs | PartNumber: Compression-38pcs
đ§ăWorking Pressure & Temperatureă - The Maximum Working Pressure Of Compression Tube Fitting Repair Is Up To 2000Psi , Temperature Range -65°F To +250°F (-53°C To +121°C).
đ§ă Guaranteeă-If You Are Not Satisfied With 1/4 Inch Brass Air Fittings, Please Feel Free To Contact Us, As We Will Offer You A Replacement Or 100% Money Back. What We Desire Is To Bring You The Best Shopping Experience..
đ§ăTipsă- These Brass Compression Fittings 1/4" Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
đ§ăYou Will Getă-1/4 In Compression Fittings Contains: 1/4" Od Straight Union-4 Pcs, 1/4" Od X 1/4" Npt Straight Male-4 Pcs, 1/4" Od X 1/4" Np 90° Elbow Male-4 Pcs,1/4" Od Tube Tee-4 Pcs, 1/4" Od Sleeves Ferrules-20 Pcs,And Thread Seal Tape-2 Pcs.Total 38 Pcs Brass Compression Fittings..
Features
- PREMIUM SOLID BRASS - 1/4" brass compression fittings kit is made of high-quality brass, with strong wear corrosion resistance, high compressive strength, durability, low magnetic
- YOU WILL GET -1/4 in compression fittings contains: 1/4 OD Straight union-4 pcs, 1/4 OD X 1/4 NPT Straight male-4 pcs, 1/4 OD X 1/4 NP 90 Elbow male-4 pcs,1/4 OD Tube tee-4 pcs, 1/4 OD Sleeves ferrules-20 pcs,and Thread seal tape-2 pcs.Total 38 pcs Brass Compression Fittings.
- WORKING PRESSURE & TEMPERATURE - The maximum working pressure of compression tube fitting repair is up to 2000PSI , temperature range -65 F to +250 F (-53 C to +121 C)
- TIPS - These brass compression fittings 1/4 contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- GUARANTEE -If you are not satisfied with 1/4 inch brass air fittings, please feel free to contact us, as we will offer you a replacement or 100% money back. What we desire is to bring you the best shopping experience.
- See more on Amazon...
Brand: TRUSTKITS | Manufacturer: TRUSTKITS
Dimensions: 1.49 x 8.26 x 4.30 inches
See On Amazon #19
Anderson Metals - 50064-06 50064 Brass Compression Tube Fitting, Tee, 3/8" x 3/8" x 3/8" Tube OD
Asin: B000BO8TTO | Model: 50064-06 | PartNumber: 50064-06 | Ean: 0719852933823 | UPC: 719852933823
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Temperature Range Of -65 To +250 Degrees F.
Female Compression Tube Fitting For Connecting To Male Threaded Pipes.
Features
- Tee with three openings for connecting and branching three pipes
- Female compression tube fitting for connecting to male threaded pipes
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
Dimensions: 1.00 x 1.00 x 1.00 Inches | Weight: 0.15 pounds
See On Amazon #20
Glarks 105Pcs Tube OD 1/4" 3/8" 1/2" Brass Compression Sleeves Ferrules, 3 Size Brass Compression Fitting Assortment Kit
Asin: B09BDT272W
âăProduct Feature:ă These Ferrule Sleeves Are Light, Portable And Durable In Use. After The Installation Is Complete, It Is Tightly Closed, Which Can Offer A Good Sealing Effect..
âăWide Applicationă: These Sleeves Are Part Of Tube Compression Fitting, Can Be Used With Copper, Brass, Aluminum, 304 Stainless Steel Tube, Plastic Tubing And Other Hard Pipe Or Hose. They Are Easy To Install And No Tool Required..
âăExcellent Craftsmanshipă: We Pay Attention To Every Detail Our Goods. These Fittings Have Perfect Radians And Are Not Easy To Slip During Installation; Surface Is Smooth And Free Of Burrs, Which Will Not Harm Your Pipeline..
âăHigh Quality Material:ă All Our Ferrules Are Made Of High Quality Brass, Anti-Corrosion And Anti-Rust, They Can Work For A Long Time Even In Humid Environment. At The Same Time, It Also Has Enough Strength To Withstand The Pressure Of The Pipeline..
Features
- What You Get: This kit include 105pcs 3 size ferrules which are suitable for 1/4", 3/8", 1/2" outer diameter of the pipe. Wide range and enough quantity can meet your various needs.
- High Quality Material: All our ferrules are made of high quality brass, anti-corrosion and anti-rust, they can work for a long time even in humid environment. At the same time, it also has enough strength to withstand the pressure of the pipeline.
- Product Feature: These ferrule sleeves are light, portable and durable in use. After the installation is complete, it is tightly closed, which can offer a good sealing effect.
- Excellent Craftsmanship : We pay attention to every detail our goods. These fittings have perfect radians and are not easy to slip during installation; surface is smooth and free of burrs, which will not harm your pipeline.
- Wide Application : These sleeves are part of tube compression fitting, can be used with copper, brass, aluminum, 304 stainless steel tube, plastic tubing and other hard pipe or hose. They are easy to install and no tool required.
- See more on Amazon...
Brand: Glarks | Manufacturer: Glarks
Weight: 1.00 pounds
See On Amazon ï»ż
Looking For Something Else?
Search